summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)AuthorFilesLines
2014-01-20Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds2-1/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS changes from Ingo Molnar: - SCI reporting for other error types not only correctable ones - GHES cleanups - Add the functionality to override error reporting agents as some machines are sporting a new extended error logging capability which, if done properly in the BIOS, makes a corresponding EDAC module redundant - PCIe AER tracepoint severity levels fix - Error path correction for the mce device init - MCE timer fix - Add more flexibility to the error injection (EINJ) debugfs interface * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, mce: Fix mce_start_timer semantics ACPI, APEI, GHES: Cleanup ghes memory error handling ACPI, APEI: Cleanup alignment-aware accesses ACPI, APEI, GHES: Do not report only correctable errors with SCI ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface ACPI, eMCA: Combine eMCA/EDAC event reporting priority EDAC, sb_edac: Modify H/W event reporting policy EDAC: Add an edac_report parameter to EDAC PCI, AER: Fix severity usage in aer trace event x86, mce: Call put_device on device_register failure
2014-01-20Merge tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds22-104/+181
Pull EDAC updates from Borislav Petkov: - mpc85xx PCIe error interrupt support - misc small enhancements/fixes all over the place. * tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Don't try to cancel workqueue when it's never setup e752x_edac: Fix pci_dev usage count sb_edac: Mark get_mci_for_node_id as static EDAC: Mark edac_create_debug_nodes as static amd64_edac: Remove "amd64" prefix from static functions amd64_edac: Simplify code around decode_bus_error amd64_edac: Mark amd64_decode_bus_error as static EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro amd64_edac: Fix condition to verify max channels allowed for F15 M30h edac/85xx: Add PCIe error interrupt edac support
2014-01-10EDAC: Don't try to cancel workqueue when it's never setupStephen Boyd1-0/+3
We only setup a workqueue for edac devices that use the polling method. We still try to cancel the workqueue if an edac_device uses the irq method though. This causes a warning from debug objects when we remove an edac device: WARNING: CPU: 0 PID: 56 at lib/debugobjects.c:260 debug_print_object+0x98/0xc0() ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x28 Modules linked in: krait_edac(-) CPU: 0 PID: 56 Comm: rmmod Not tainted 3.12.0-rc2-00035-g15292a0 #69 (unwind_backtrace+0x0/0x144) (show_stack+0x20/0x24) (dump_stack+0x74/0xb4) (warn_slowpath_common+0x78/0x9c) (warn_slowpath_fmt+0x40/0x48) (debug_print_object+0x98/0xc0) (debug_object_assert_init+0xdc/0xec) (del_timer+0x24/0x7c) (try_to_grab_pending+0xc0/0x1b0) (cancel_delayed_work+0x2c/0xa0) (edac_device_workq_teardown+0x1c/0x38) (edac_device_del_device+0xb8/0xe4) (krait_edac_remove+0x50/0x70 [krait_edac]) (platform_drv_remove+0x24/0x28) (__device_release_driver+0x68/0xc0) (driver_detach+0xc4/0xc8) (bus_remove_driver+0xac/0x114) (driver_unregister+0x38/0x58) (platform_driver_unregister+0x1c/0x20) (krait_edac_driver_exit+0x14/0x1c [krait_edac]) (SyS_delete_module+0x178/0x2b4) Fix it by skipping the workqueue teardown for such devices. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Link: http://lkml.kernel.org/r/1388434457-4194-2-git-send-email-sboyd@codeaurora.org Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-21e752x_edac: Fix pci_dev usage countAristeu Rozanski1-1/+3
In case the device 0, function 1 is not found using pci_get_device(), pci_scan_single_device() will be used but, differently than pci_get_device(), it allocates a pci_dev but doesn't does bump the usage count on the pci_dev and after few module removals and loads the pci_dev will be freed. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Reviewed-by: mark gross <mark.gross@intel.com> Link: http://lkml.kernel.org/r/20131205153755.GL4545@redhat.com Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-16Merge tag 'ras_for_3.14' of ↵Ingo Molnar2-1/+24
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras Pull RAS updates from Borislav Petkov: * Add the functionality to override error reporting agents as some machines are sporting a new extended error logging capability which, if done properly in the BIOS, makes a corresponding EDAC module redundant, from Gong Chen. * PCIe AER tracepoint severity levels fix, from Rui Wang. * Error path correction for the mce device init, from Levente Kurusa. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-15sb_edac: Mark get_mci_for_node_id as staticRashika Kheria1-1/+1
This patch marks the function get_mci_for_node_id() as static because it is not used outside of sb_edac.c. Thus, it also eliminates the following warning: drivers/edac/sb_edac.c:918:22: warning: no previous prototype for ‘get_mci_for_node_id’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/0441f508186fc4eeabc8e9c3e4dde013d99405d4.1387029387.git.rashika.kheria@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15EDAC: Mark edac_create_debug_nodes as staticRashika Kheria1-1/+1
This patch marks the function edac_create_debug_nodes() as static because it is not used outside of edac_mc_sysfs.c. Thus, it also eliminates the following warning: drivers/edac/edac_mc_sysfs.c:917:5: warning: no previous prototype for ‘edac_create_debug_nodes’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/a1c863b08c0d6f67d03280cf908c771bf26a3239.1387029387.git.rashika.kheria@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15amd64_edac: Remove "amd64" prefix from static functionsBorislav Petkov1-62/+56
No need for the namespace tagging there. Cleanup setup_pci_device while at it. Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15amd64_edac: Simplify code around decode_bus_errorBorislav Petkov1-9/+4
Drop wrapper function and prefixes. Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15amd64_edac: Mark amd64_decode_bus_error as staticRashika Kheria1-1/+1
This patch marks the function amd64_decode_bus_error() as static because it is not used outside of amd64_edac.c. It also eliminates the following warning: drivers/edac/amd64_edac.c:2038:6: warning: no previous prototype for ‘amd64_decode_bus_error’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/7cddbd4c69ed493f183383e98853181aaf75b26b.1387029387.git.rashika.kheria@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-11EDAC, sb_edac: Modify H/W event reporting policyChen, Gong1-1/+5
Newer Intel platforms support more than one method to report H/W event. On this kind of platform, H/W event report can adopt new method and traditional EDAC method should be disabled. Moreover, if EDAC event report method is set to *force*, it means event must be reported via EDAC interface. IOW, it overrides the default event report policy. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1386310630-12529-3-git-send-email-gong.chen@linux.intel.com [ Boris: massage commit and error messages ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-11EDAC: Add an edac_report parameter to EDACChen, Gong1-0/+19
This new parameter is used to control how to report HW error reporting, especially for newer Intel platform, like Ivybridge-EX, which contains an enhanced error decoding functionality in the firmware, i.e. eMCA. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1386310630-12529-2-git-send-email-gong.chen@linux.intel.com [ Boris: massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-06EDAC: Remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han18-18/+18
Currently, there is no other bus that has something like this macro for their device ids. Thus, DEFINE_PCI_DEVICE_TABLE macro should be removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Link: http://lkml.kernel.org/r/001c01ceefb3$5724d860$056e8920$%han@samsung.com [ Boris: swap commit message with better one. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-06amd64_edac: Fix condition to verify max channels allowed for F15 M30hAravind Gopalakrishnan1-1/+1
The value returned from 'f15_m30h_determine_channel' will always be 0x3 max. The condition (channel > 4 || channel < 0) works as hardware never returns a value of 4, but it leads to static checker analysis errors like http://marc.info/?l=linux-edac&m=138607615131951&w=2. Fix that. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/20131203130857.GA32170@elgon.mountain [ Boris: massage commit message a bit. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-30sb_edac: Shut up compiler warning when EDAC_DEBUG is enabledAristeu Rozanski1-1/+1
Fix this: In file included from drivers/edac/sb_edac.c:27:0: drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’: drivers/edac/edac_core.h:50:8: warning: ‘limit’ may be used uninitialized in this function [-Wmaybe-uninitialized] printk(level "EDAC " prefix ": " fmt, ##arg) ^ drivers/edac/sb_edac.c:948:25: note: ‘limit’ was declared here u64 ch_addr, offset, limit, prv = 0; Limit can be initialized to 0. The only way limit wouldn't be initialized is if there are no DIMMs present (which would be a bug of course) and it'd fail on the next test. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Link: http://lkml.kernel.org/r/20131121122021.GD26009@pd.tnic Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-25edac/85xx: Add PCIe error interrupt edac supportChunhe Lan2-11/+94
Add pcie error interrupt edac support for mpc85xx, p3041, p4080, and p5020. The mpc85xx uses the legacy interrupt report mechanism - the error interrupts are reported directly to mpic. While the p3041/ p4080/p5020 attaches the most of error interrupts to interrupt zero. And report error interrupts to mpic via interrupt 0. This patch can handle both of them. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Link: http://lkml.kernel.org/r/1384712714-8826-3-git-send-email-morbidrsa@gmail.com Cc: Doug Thompson <dougthompson@xmission.com> Cc: Dave Jiang <dave.jiang@gmail.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-18Merge branch 'linux_next' of ↵Linus Torvalds2-129/+465
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC driver updates from Mauro Carvalho Chehab: - sb_edac: add support for Ivy Bridge support - cell_edac: add a missing of_node_put() call * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: cell_edac: fix missing of_node_put sb_edac: add support for Ivy Bridge sb_edac: avoid decoding the same error multiple times sb_edac: rename mci_bind_devs() sb_edac: enable multiple PCI id tables to be used sb_edac: rework sad_pkg sb_edac: allow different interleave lists sb_edac: allow different dram_rule arrays sb_edac: isolate TOHM retrieval sb_edac: rename pci_br sb_edac: isolate TOLM retrieval sb_edac: make RANK_CFG_A value part of sbridge_info
2013-11-18Merge tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds6-125/+128
Pull EDAC updates from Borislav Petkov: "Following up on last week's discussion, here's my part of the EDAC pile, highlights in the signed tag. The last two patches have a date from just now because I've just applied them to the tree after Johannes sent them to me earlier. I decided to forward them now because they're trivial. There's a third one for MPC85xx which adds PCIe error interrupt support but since it is not so trivial and hasn't seen any linux-next time, I'm deferring it to 3.14 EDAC update highlights: - Support for Calxeda ECX-2000 memory controller, from Robert Richter - Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob Herring and Robert Richter - New maintainer for Freescale's MPC85xx EDAC driver: Johannes Thumshirn" * tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: edac/85xx: Remove mpc85xx_pci_err_remove EDAC: Add edac-mpc85xx driver to MAINTAINERS edac, highbank: Moving error injection to sysfs for edac edac, highbank: Add MAINTAINERS entry edac: Unify reporting of device info for device, mc and pci edac, highbank: Improve and unify naming edac, highbank: Add Calxeda ECX-2000 support ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi edac, highbank: Fix interrupt setup of mem and l2 controller
2013-11-17edac/85xx: Remove mpc85xx_pci_err_removeJohannes Thumshirn1-22/+0
Remove mpc85xx_pci_err_remove(...) which is obsolete, this removes the compiler warning which can be seen when building the driver either statically or as a module. Signed-off-by: Johannes Thumshirn <morbidrsa@gmail.com> Link: https://lkml.kernel.org/r/20131112161901.GA15637@jtlinux Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-14cell_edac: fix missing of_node_putLibo Chen1-0/+1
Decrease device_node refcount np after task completion. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: add support for Ivy BridgeAristeu Rozanski1-70/+376
Since Ivy Bridge memory controller is very similar to Sandy Bridge, it's wiser to modify sb_edac to support both instead of creating another driver. [m.chehab@samsung.com: Fix CodingStyle] Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: avoid decoding the same error multiple timesAristeu Rozanski1-0/+4
Whenever the extended error reporting is active, multiple MCEs will be generated for the same event, which will lead to multiple repeated errors to be reported. So check ADDRV and only decode the error if the MCE address is valid. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: rename mci_bind_devs()Aristeu Rozanski1-3/+3
This is in preparation for Ivy Bridge support Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: enable multiple PCI id tables to be usedAristeu Rozanski1-9/+13
This is needed to allow separated PCI id tables for Sandy Bridge and Ivy Bridge. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: rework sad_pkgAristeu Rozanski1-36/+30
This is in preparation for Ivy Bridge support Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: allow different interleave listsAristeu Rozanski1-5/+8
This is in preparation for Ivy Bridge support Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: allow different dram_rule arraysAristeu Rozanski1-11/+14
This is in preparation for Ivy Bridge support Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: isolate TOHM retrievalAristeu Rozanski1-3/+11
This is preparation of Ivy Bridge support. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: rename pci_brAristeu Rozanski1-4/+4
Ivy Bridge has more than one, so rename pci_br to pci_br0 Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: isolate TOLM retrievalAristeu Rozanski1-4/+13
This is in preparation for the Ivy Bridge support. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14sb_edac: make RANK_CFG_A value part of sbridge_infoAristeu Rozanski1-2/+6
This is in preparation of Ivy Bridge support. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-11-04edac, highbank: Moving error injection to sysfs for edacRobert Richter1-35/+20
Always have the error injection i/f available, even if there is no debugfs or EDAC_DEBUG enabled. We need this for testing production kernels and environments. Thus, the entry moves from: /sys/kernel/debug/edac/mc0/inject_ctrl to: /sys/devices/system/edac/mc/mc0/inject_ctrl No other changes of the interface. Signed-off-by: Robert Richter <robert.richter@linaro.org> Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04edac: Unify reporting of device info for device, mc and pciRobert Richter3-13/+10
Log messages slightly differ between edac subsystems. Unifying it. Signed-off-by: Robert Richter <robert.richter@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04edac, highbank: Improve and unify namingRobert Richter2-9/+13
Assinging correct names of the 'hb_mc_edac' and 'hb_l2_edac' edac modules for module, controller and device. Reported values for Highbank in dmesg are now: EDAC MC0: Giving out device to module hb_mc_edac controller calxeda,hb-ddr-ctrl: DEV fff00000.memory-controller (INTERRUPT) EDAC DEVICE0: Giving out device to module hb_l2_edac controller calxeda,hb-sregs-l2-ecc: DEV fff3c200.sregs (INTERRUPT) Signed-off-by: Robert Richter <robert.richter@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04edac, highbank: Add Calxeda ECX-2000 supportRobert Richter1-35/+70
Implement edac support for Calxeda ECX-2000. The ECX-2000 memory controller is similar to Highbank but has different register bases for error and interrupt registers. There is an own device tree name "calxeda,ecx-2000-ddr-ctrl" for identification and initialization of the ECX-2000 and its base addresses. Signed-off-by: Robert Richter <robert.richter@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04edac, highbank: Fix interrupt setup of mem and l2 controllerRobert Richter2-16/+20
Register and enable interrupts after the edac registration. Otherwise incomming ecc error interrupts lead to crashes during device setup. Fixing this in drivers for mc and l2. Signed-off-by: Robert Richter <robert.richter@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: stable <stable@vger.kernel.org> # 3.6+ Signed-off-by: Robert Richter <rric@kernel.org>
2013-10-23EDAC, GHES: Update ghes error record infoChen, Gong1-0/+11
In latest UEFI spec(by now it's 2.4) there are some new fields for memory error reporting. Add these new fields for ghes_edac interface. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-23ACPI, APEI, CPER: Add UEFI 2.4 support for memory errorChen, Gong1-3/+2
In latest UEFI spec(by now it is 2.4) memory error definition for CPER (UEFI 2.4 Appendix N Common Platform Error Record) adds some new fields. These fields help people to locate memory error to an actual DIMM location. Original-author: Tony Luck <tony.luck@intel.com> Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-21bitops: Introduce a more generic BITMASK macroChen, Gong3-31/+25
GENMASK is used to create a contiguous bitmask([hi:lo]). It is implemented twice in current kernel. One is in EDAC driver, the other is in SiS/XGI FB driver. Move it to a more generic place for other usage. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-09drivers: clean-up prom.h implicit includesRob Herring1-0/+1
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds1-1/+0
Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
2013-08-27amd64_edac: Fix incorrect wraparoundsAravind Gopalakrishnan1-5/+6
dct_base and dct_limit obtain 32 bit register values when they read their respective pci config space registers. A left shift beyond 32 bits will cause them to wrap around. Similar case for chan_addr as can be seen from the bug report (link below). In the patch, we rectify this by casting chan_addr to u64 and by comparing dct_base and dct_limit against properly shifted sys_addr in order to compare the correct bits. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/20130819132302.GA12171@elgon.mountain Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-27amd64_edac: Correct erratum 505 rangeBorislav Petkov1-4/+4
Basically we want to cover all 0x0-0xf models, i.e. Orochi and later. Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/20130819192321.GF4165@pd.tnic Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-15Merge tag 'edac_for_3.12' of ↵Ingo Molnar5-8/+15
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras Pull RAS/EDAC updates from Boris Petkov: "An amd64_edac fix for single channel configurations + trivial cleanups courtesy of Jingoo Han." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-14cpc925_edac: Use proper array terminationJingoo Han1-1/+1
The struct should be terminated by using empty braces in order to fix the following sparse warning. drivers/edac/cpc925_edac.c:792:10: warning: Using plain integer as NULL pointer Signed-off-by: Jingoo Han <jg1.han@samsung.com> [ drop obvious comment ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12amd64_edac: Get rid of boot_cpu_data accessesBorislav Petkov2-48/+46
Now that we cache (family, model, stepping) locally, use them instead of boot_cpu_data. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12amd64_edac: Add ECC decoding support for newer F15h modelsAravind Gopalakrishnan2-34/+270
On newer models, support has been included for upto 4 DCT's, however, only DCT0 and DCT3 are currently configured (cf BKDG Section 2.10). Also, the routing DRAM Requests algorithm is different for F15h M30h. Thus it is cleaner to use a brand new function rather than adding quirks to the more generic f1x_match_to_this_node(). Refer to "2.10.5 DRAM Routing Requests" in the BKDG for further info. Tested on Fam15h M30h with ECC turned on using mce_amd_inj facility and verified to be functionally correct. While at it, verify if erratum workarounds for E505 and E637 still hold. From email conversations within AMD, the current status of the errata is: * Erratum 505: fixed in model 0x1, stepping 0x1 and later. * Erratum 637: not fixed. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> [ Cleanups, corrections ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-09x38_edac: Make a local function staticJingoo Han1-2/+1
Make a local function static in order to fix the following sparse warning: drivers/edac/x38_edac.c:252:14: warning: symbol 'x38_map_mchbar' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> [ Boris: Correct commit message ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-09i3200_edac: Make a local function staticJingoo Han1-2/+1
This local symbol is used only in this file. Fix the following sparse warnings: drivers/edac/i3200_edac.c:264:14: warning: symbol 'i3200_map_mchbar' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 02:17:00 +0000