summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2018-04-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-56/+86
Pull kvm fixes from Paolo Bonzini: "Bug fixes, plus a new test case and the associated infrastructure for writing nested virtualization tests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: selftests: add vmx_tsc_adjust_test kvm: x86: move MSR_IA32_TSC handling to x86.c X86/KVM: Properly update 'tsc_offset' to represent the running guest kvm: selftests: add -std=gnu99 cflags x86: Add check for APIC access address for vmentry of L2 guests KVM: X86: fix incorrect reference of trace_kvm_pi_irte_update X86/KVM: Do not allow DISABLE_EXITS_MWAIT when LAPIC ARAT is not available kvm: selftests: fix spelling mistake: "divisable" and "divisible" X86/VMX: Disable VMX preemption timer if MWAIT is not intercepted
2018-04-16x86/ldt: Fix support_pte_mask filtering in map_ldt_struct()Joerg Roedel1-1/+1
The |= operator will let us end up with an invalid PTE. Use the correct &= instead. [ The bug was also independently reported by Shuah Khan ] Fixes: fb43d6cb91ef ('x86/mm: Do not auto-massage page protections') Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-16kvm: x86: move MSR_IA32_TSC handling to x86.cPaolo Bonzini3-29/+6
This is not specific to Intel/AMD anymore. The TSC offset is available in vcpu->arch.tsc_offset. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-16X86/KVM: Properly update 'tsc_offset' to represent the running guestKarimAllah Ahmed4-22/+56
Update 'tsc_offset' on vmentry/vmexit of L2 guests to ensure that it always captures the TSC_OFFSET of the running guest whether it is the L1 or L2 guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> [AMD changes, fix update_ia32_tsc_adjust_msr. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-17powerpc/lib: Fix off-by-one in alternate feature patchingMichael Ellerman1-1/+1
When we patch an alternate feature section, we have to adjust any relative branches that branch out of the alternate section. But currently we have a bug if we have a branch that points to past the last instruction of the alternate section, eg: FTR_SECTION_ELSE 1: b 2f or 6,6,6 2: ALT_FTR_SECTION_END(...) nop This will result in a relative branch at 1 with a target that equals the end of the alternate section. That branch does not need adjusting when it's moved to the non-else location. Currently we do adjust it, resulting in a branch that goes off into the link-time location of the else section, which is junk. The fix is to not patch branches that have a target == end of the alternate section. Fixes: d20fe50a7b3c ("KVM: PPC: Book3S HV: Branch inside feature section") Fixes: 9b1a735de64c ("powerpc: Add logic to patch alternative feature sections") Cc: stable@vger.kernel.org # v2.6.27+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-16MIPS: dts: Boston: Fix PCI bus dtc warnings:Matt Redfearn1-0/+6
dtc recently (v1.4.4-8-g756ffc4f52f6) added PCI bus checks. Fix the warnings now emitted: arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@10000000: missing bus-range for PCI bridge arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@12000000: missing bus-range for PCI bridge arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@14000000: missing bus-range for PCI bridge Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19070/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-16s390: rename default_defconfig to debug_defconfigHeiko Carstens1-0/+0
The name debug_defconfig reflects what the config is actually good for and should be less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390: remove gcov defconfigHeiko Carstens1-661/+0
This config is not needed anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390: update defconfigMartin Schwidefsky3-18/+46
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390: add support for IBM z14 Model ZR1Heiko Carstens3-4/+6
Just add the new machine type number to the two places that matter. Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/boot: remove unused COMPILE_VERSION and ccflags-yVasily Gorbik1-6/+0
ccflags-y has no effect (no code is built in that directory, arch/s390/boot/compressed/Makefile defines its own KBUILD_CFLAGS). Removing ccflags-y together with COMPILE_VERSION. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/nospec: include cpu.hSebastian Ott1-0/+1
Fix the following sparse warnings: symbol 'cpu_show_spectre_v1' was not declared. Should it be static? symbol 'cpu_show_spectre_v2' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/decompressor: Ignore file vmlinux.bin.fullThomas Richter1-0/+1
Commit 81796a3c6a4a ("s390/decompressor: trim uncompressed image head during the build") introduced a new file named vmlinux.bin.full in directory arch/s390/boot/compressed. Add this file to the list of ignored files so it does not show up on git status. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: add generated files to .gitignoreHeiko Carstens1-0/+2
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/Kconfig: Move kexec config options to "Processor type and features"Philipp Rudo1-21/+20
The config options for kexec are currently not under any menu directory. Up until now this was not a problem as standard kexec is always compiled in and thus does not create a menu entry. This changed when kexec_file_load was enabled. Its config option requires a menu entry which, when added beneath standard kexec option, appears on the main directory above "General Setup". Thus move the whole block further down such that the entry in now in "Processor type and features". While at it also update the help text for kexec file. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add ELF loaderPhilipp Rudo4-0/+150
Add an ELF loader for kexec_file. The main task here is to do proper sanity checks on the ELF file. Basically all other functionality was already implemented for the image loader. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add crash support to image loaderPhilipp Rudo4-6/+234
Add support to load a crash kernel to the image loader. This requires extending the purgatory. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add image loaderPhilipp Rudo4-1/+176
Add an image loader for kexec_file_load. For simplicity first skip crash support. The functions defined in machine_kexec_file will later be shared with the ELF loader. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add kexec_file_load system callPhilipp Rudo6-0/+144
This patch adds the kexec_file_load system call to s390 as well as the arch specific functions common code requires to work. Loaders for the different file types will be added later. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Add purgatoryPhilipp Rudo7-0/+198
The common code expects the architecture to have a purgatory that runs between the two kernels. Add it now. For simplicity first skip crash support. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16s390/kexec_file: Prepare setup.h for kexec_file_loadPhilipp Rudo1-13/+27
kexec_file_load needs to prepare the new kernels before they are loaded. For that it has to know the offsets in head.S, e.g. to register the new command line. Unfortunately there are no macros right now defining those offsets. Define them now. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16Merge tag 'perf-core-for-mingo-4.17-20180413' of ↵Ingo Molnar1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull tooling improvements and fixes from Arnaldo Carvalho de Melo: perf annotate fixes and improvements: - Allow showing offsets in more than just jump targets, use the new 'O' hotkey in the TUI, config ~/.perfconfig annotate.offset_level for it and for --stdio2 (Arnaldo Carvalho de Melo) - Use the resolved variable names from objdump disassembled lines to make them more compact, just like was already done for some instructions, like "mov", this eventually will be done more generally, but lets now add some more to the existing mechanism (Arnaldo Carvalho de Melo) perf record fixes: - Change warning for missing topology sysfs entry to debug, as not all architectures have those files, s390 being one of those (Thomas Richter) perf sched fixes: - Fix -g/--call-graph documentation (Takuya Yamamoto) perf stat: - Enable 1ms interval for printing event counters values in (Alexey Budankov) perf test fixes: - Run dwarf unwind on arm32 (Kim Phillips) - Remove unused ptrace.h include from LLVM test, sidesteping older clang's lack of support for some asm constructs (Arnaldo Carvalho de Melo) perf version fixes: - Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version --build-options' when HAVE_SYSCALL_TABLE_SUPPORT is true, as libaudit won't be used in that case, print info about syscall_table support instead (Jin Yao) Build system fixes: - Use HAVE_..._SUPPORT used consistently (Jin Yao) - Restore READ_ONCE() C++ compatibility in tools/include (Mark Rutland) - Give hints about package names needed to build jvmti (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-15hypfs_kill_super(): deal with failed allocationsAl Viro1-1/+1
hypfs_fill_super() might fail to allocate sbi; hypfs_kill_super() should not oops on that. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15Merge tag 'kbuild-v4.17-2' of ↵Linus Torvalds5-10/+4
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables
2018-04-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds24-777/+1040
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes and updates for x86: - Address a swiotlb regression which was caused by the recent DMA rework and made driver fail because dma_direct_supported() returned false - Fix a signedness bug in the APIC ID validation which caused invalid APIC IDs to be detected as valid thereby bloating the CPU possible space. - Fix inconsisten config dependcy/select magic for the MFD_CS5535 driver. - Fix a corruption of the physical address space bits when encryption has reduced the address space and late cpuinfo updates overwrite the reduced bit information with the original value. - Dominiks syscall rework which consolidates the architecture specific syscall functions so all syscalls can be wrapped with the same macros. This allows to switch x86/64 to struct pt_regs based syscalls. Extend the clearing of user space controlled registers in the entry patch to the lower registers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix signedness bug in APIC ID validity checks x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption x86/olpc: Fix inconsistent MFD_CS5535 configuration swiotlb: Use dma_direct_supported() for swiotlb_ops syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention syscalls/core, syscalls/x86: Clean up syscall stub naming convention syscalls/x86: Extend register clearing on syscall entry to lower registers syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64 syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y x86/syscalls: Don't pointlessly reload the system call number x86/mm: Fix documentation of module mapping range with 4-level paging x86/cpuid: Switch to 'static const' specifier
2018-04-15Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds22-105/+329
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "Another series of PTI related changes: - Remove the manual stack switch for user entries from the idtentry code. This debloats entry by 5k+ bytes of text. - Use the proper types for the asm/bootparam.h defines to prevent user space compile errors. - Use PAGE_GLOBAL for !PCID systems to gain back performance - Prevent setting of huge PUD/PMD entries when the entries are not leaf entries otherwise the entries to which the PUD/PMD points to and are populated get lost" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pgtable: Don't set huge PUD/PMD on non-leaf entries x86/pti: Leave kernel text global for !PCID x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image x86/pti: Enable global pages for shared areas x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init x86/mm: Comment _PAGE_GLOBAL mystery x86/mm: Remove extra filtering in pageattr code x86/mm: Do not auto-massage page protections x86/espfix: Document use of _PAGE_GLOBAL x86/mm: Introduce "default" kernel PTE mask x86/mm: Undo double _PAGE_PSE clearing x86/mm: Factor out pageattr _PAGE_GLOBAL setting x86/entry/64: Drop idtentry's manual stack switch for user entries x86/uapi: Fix asm/bootparam.h userspace compilation errors
2018-04-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Thomas Gleixner: "A rather large set of perf updates: Kernel: - Fix various initialization issues - Prevent creating [ku]probes for not CAP_SYS_ADMIN users Tooling: - Show only failing syscalls with 'perf trace --failure' (Arnaldo Carvalho de Melo) e.g: See what 'openat' syscalls are failing: # perf trace --failure -e openat 762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? > 790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory ^C# - Show information about the event (freq, nr_samples, total period/nr_events) in the annotate --tui and --stdio2 'perf annotate' output, similar to the first line in the 'perf report --tui', but just for the samples for a the annotated symbol (Arnaldo Carvalho de Melo) - Introduce 'perf version --build-options' to show what features were linked, aliased as well as a shorter 'perf -vv' (Jin Yao) - Add a "dso_size" sort order (Kim Phillips) - Remove redundant ')' in the tracepoint output in 'perf trace' (Changbin Du) - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo Carvalho de Melo) - Show group details on the title line in the annotate browser and 'perf annotate --stdio2' output, so that the per-event columns can have headers (Arnaldo Carvalho de Melo) - Fixup vertical line separating metrics from instructions and cleaning unused lines at the bottom, both in the annotate TUI browser (Arnaldo Carvalho de Melo) - Remove duplicated 'samples' in lost samples warning in 'perf report' (Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing the perf build process, automagically adding support for the new DRM_I915_QUERY ioctl (Arnaldo Carvalho de Melo) - Make auxtrace_queues__add_buffer() allocate struct buffer, from a patchkit already applied (Adrian Hunter) - Fix the --stdio2/TUI annotate output to include group details, be it for a recorded '{a,b,f}' explicit event group or when forcing group display using 'perf report --group' for a set of events not recorded as a group (Arnaldo Carvalho de Melo) - Fix display artifacts in the ui browser (base class for the annotate and main report/top TUI browser) related to the extra title lines work (Arnaldo Carvalho de Melo) - perf auxtrace refactorings, leftovers from a previously partially processed patchset (Adrian Hunter) - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing a perf build warning and in the process automagically adding support for a new ioctl command (Arnaldo Carvalho de Melo) - Fix a strncpy issue in uprobe tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open() tracing/uprobe_event: Fix strncpy corner case perf/core: Fix perf_uprobe_init() perf/core: Fix perf_kprobe_init() perf/core: Fix use-after-free in uprobe_perf_close() perf tests clang: Fix function name for clang IR test perf clang: Add support for recent clang versions perf tools: Fix perf builds with clang support perf tools: No need to include namespaces.h in util.h perf hists browser: Remove leftover from row returned from refresh perf hists browser: Show extra_title_lines in the 'D' debug hotkey perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering tools headers uapi: Synchronize i915_drm.h perf report: Remove duplicated 'samples' in lost samples warning perf ui browser: Fixup cleaning unused lines at the bottom perf annotate browser: Fixup vertical line separating metrics from instructions perf annotate: Show group details on the title line perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer perf/x86/intel: Move regs->flags EXACT bit init perf trace: Remove redundant ')' ...
2018-04-15Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI bootup fixlet from Thomas Gleixner: "A single fix for an early boot warning caused by invoking this_cpu_has() before SMP initialization" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush()
2018-04-15Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-2/+0
Pull OpenRISC fixlet from Stafford Horne: "Just one small thing here, it came in a while back but I didnt have anything in my 4.16 queue, still its the only thing for 4.17 so sending it alone. Small cleanup: remove unused __ARCH_HAVE_MMU define" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: remove unused __ARCH_HAVE_MMU define
2018-04-15Merge tag 'powerpc-4.17-2' of ↵Linus Torvalds10-40/+63
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when loading modules built with a different CONFIG_RELOCATABLE value by adding CONFIG_RELOCATABLE to vermagic. - Fix busy loops in the OPAL NVRAM driver if we get certain error conditions from firmware. - Remove tlbie trace points from KVM code that's called in real mode, because it causes crashes. - Fix checkstops caused by invalid tlbiel on Power9 Radix. - Ensure the set of CPU features we "know" are always enabled is actually the minimal set when we build with support for firmware supplied CPU features. Thanks to: Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin. * tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU features powerpc/mm/radix: Fix checkstops caused by invalid tlbiel KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode powerpc/8xx: Fix build with hugetlbfs enabled powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops powerpc/fscr: Enable interrupts earlier before calling get_user() powerpc/64s: Fix section mismatch warnings from setup_rfi_flush() powerpc/modules: Fix crashes by adding CONFIG_RELOCATABLE to vermagic
2018-04-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds18-708/+138
Merge yet more updates from Andrew Morton: - various hotfixes - kexec_file updates and feature work * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits) kernel/kexec_file.c: move purgatories sha256 to common code kernel/kexec_file.c: allow archs to set purgatory load address kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: split up __kexec_load_puragory kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations* kernel/kexec_file.c: search symbols in read-only kexec_purgatory kernel/kexec_file.c: make purgatory_info->ehdr const kernel/kexec_file.c: remove checks in kexec_purgatory_load include/linux/kexec.h: silence compile warnings kexec_file, x86: move re-factored code to generic side x86: kexec_file: clean up prepare_elf64_headers() x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers() x86: kexec_file: purge system-ram walking from prepare_elf64_headers() kexec_file,x86,powerpc: factor out kexec_file_ops functions kexec_file: make use of purgatory optional proc: revalidate misc dentries mm, slab: reschedule cache_reap() on the same CPU ...
2018-04-14parisc: Fix missing binfmt_elf32.o build errorHelge Deller1-1/+1
Commit 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") removed the binfmt_elf32.c source file, but missed to drop the object file from the list of object files the Makefile, which then results in a build error. Fixes: 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-13kernel/kexec_file.c: move purgatories sha256 to common codePhilipp Rudo5-305/+16
The code to verify the new kernels sha digest is applicable for all architectures. Move it to common code. One problem is the string.c implementation on x86. Currently sha256 includes x86/boot/string.h which defines memcpy and memset to be gcc builtins. By moving the sha256 implementation to common code and changing the include to linux/string.h both functions are no longer defined. Thus definitions have to be provided in x86/purgatory/string.c Link: http://lkml.kernel.org/r/20180321112751.22196-12-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: allow archs to set purgatory load addressPhilipp Rudo2-8/+9
For s390 new kernels are loaded to fixed addresses in memory before they are booted. With the current code this is a problem as it assumes the kernel will be loaded to an 'arbitrary' address. In particular, kexec_locate_mem_hole searches for a large enough memory region and sets the load address (kexec_bufer->mem) to it. Luckily there is a simple workaround for this problem. By returning 1 in arch_kexec_walk_mem, kexec_locate_mem_hole is turned off. This allows the architecture to set kbuf->mem by hand. While the trick works fine for the kernel it does not for the purgatory as here the architectures don't have access to its kexec_buffer. Give architectures access to the purgatories kexec_buffer by changing kexec_load_purgatory to take a pointer to it. With this change architectures have access to the buffer and can edit it as they need. A nice side effect of this change is that we can get rid of the purgatory_info->purgatory_load_address field. As now the information stored there can directly be accessed from kbuf->mem. Link: http://lkml.kernel.org/r/20180321112751.22196-11-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory loadPhilipp Rudo1-4/+6
The current code uses the sh_offset field in purgatory_info->sechdrs to store a pointer to the current load address of the section. Depending whether the section will be loaded or not this is either a pointer into purgatory_info->purgatory_buf or kexec_purgatory. This is not only a violation of the ELF standard but also makes the code very hard to understand as you cannot tell if the memory you are using is read-only or not. Remove this misuse and store the offset of the section in pugaroty_info->purgatory_buf in sh_offset. Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations*Philipp Rudo1-36/+20
When the relocations are applied to the purgatory only the section the relocations are applied to is writable. The other sections, i.e. the symtab and .rel/.rela, are in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. While at it also change the signatures of arch_kexec_apply_relocations* to take section pointers instead of just the index of the relocation section. This removes the second lookup and sanity check of the sections in arch code. Link: http://lkml.kernel.org/r/20180321112751.22196-6-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec_file, x86: move re-factored code to generic sideAKASHI Takahiro1-188/+7
In the previous patches, commonly-used routines, exclude_mem_range() and prepare_elf64_headers(), were carved out. Now place them in kexec common code. A prefix "crash_" is given to each of their names to avoid possible name collisions. Link: http://lkml.kernel.org/r/20180306102303.9063-8-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13x86: kexec_file: clean up prepare_elf64_headers()AKASHI Takahiro1-11/+7
Removing bufp variable in prepare_elf64_headers() makes the code simpler and more understandable. Link: http://lkml.kernel.org/r/20180306102303.9063-7-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem bufferAKASHI Takahiro1-51/+31
While CRASH_MAX_RANGES (== 16) seems to be good enough, fixed-number array is not a good idea in general. In this patch, size of crash_mem buffer is calculated as before and the buffer is now dynamically allocated. This change also allows removing crash_elf_data structure. Link: http://lkml.kernel.org/r/20180306102303.9063-6-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers()AKASHI Takahiro1-12/+12
The code guarded by CONFIG_X86_64 is necessary on some architectures which have a dedicated kernel mapping outside of linear memory mapping. (arm64 is among those.) In this patch, an additional argument, kernel_map, is added to enable/ disable the code removing #ifdef. Link: http://lkml.kernel.org/r/20180306102303.9063-5-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13x86: kexec_file: purge system-ram walking from prepare_elf64_headers()AKASHI Takahiro1-63/+58
While prepare_elf64_headers() in x86 looks pretty generic for other architectures' use, it contains some code which tries to list crash memory regions by walking through system resources, which is not always architecture agnostic. To make this function more generic, the related code should be purged. In this patch, prepare_elf64_headers() simply scans crash_mem buffer passed and add all the listed regions to elf header as a PT_LOAD segment. So walk_system_ram_res(prepare_elf64_headers_callback) have been moved forward before prepare_elf64_headers() where the callback, prepare_elf64_headers_callback(), is now responsible for filling up crash_mem buffer. Meanwhile exclude_elf_header_ranges() used to be called every time in this callback it is rather redundant and now called only once in prepare_elf_headers() as well. Link: http://lkml.kernel.org/r/20180306102303.9063-4-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec_file,x86,powerpc: factor out kexec_file_ops functionsAKASHI Takahiro6-83/+9
As arch_kexec_kernel_image_{probe,load}(), arch_kimage_file_post_load_cleanup() and arch_kexec_kernel_verify_sig() are almost duplicated among architectures, they can be commonalized with an architecture-defined kexec_file_ops array. So let's factor them out. Link: http://lkml.kernel.org/r/20180306102303.9063-3-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec_file: make use of purgatory optionalAKASHI Takahiro2-0/+6
Patch series "kexec_file, x86, powerpc: refactoring for other architecutres", v2. This is a preparatory patchset for adding kexec_file support on arm64. It was originally included in a arm64 patch set[1], but Philipp is also working on their kexec_file support on s390[2] and some changes are now conflicting. So these common parts were extracted and put into a separate patch set for better integration. What's more, my original patch#4 was split into a few small chunks for easier review after Dave's comment. As such, the resulting code is basically identical with my original, and the only *visible* differences are: - renaming of _kexec_kernel_image_probe() and _kimage_file_post_load_cleanup() - change one of types of arguments at prepare_elf64_headers() Those, unfortunately, require a couple of trivial changes on the rest (#1, #6 to #13) of my arm64 kexec_file patch set[1]. Patch #1 allows making a use of purgatory optional, particularly useful for arm64. Patch #2 commonalizes arch_kexec_kernel_{image_probe, image_load, verify_sig}() and arch_kimage_file_post_load_cleanup() across architectures. Patches #3-#7 are also intended to generalize parse_elf64_headers(), along with exclude_mem_range(), to be made best re-use of. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html [2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html This patch (of 7): On arm64, crash dump kernel's usable memory is protected by *unmapping* it from kernel virtual space unlike other architectures where the region is just made read-only. It is highly unlikely that the region is accidentally corrupted and this observation rationalizes that digest check code can also be dropped from purgatory. The resulting code is so simple as it doesn't require a bit ugly re-linking/relocation stuff, i.e. arch_kexec_apply_relocations_add(). Please see: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html All that the purgatory does is to shuffle arguments and jump into a new kernel, while we still need to have some space for a hash value (purgatory_sha256_digest) which is never checked against. As such, it doesn't make sense to have trampline code between old kernel and new kernel on arm64. This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and allows related code to be compiled in only if necessary. [takahiro.akashi@linaro.org: fix trivial screwup] Link: http://lkml.kernel.org/r/20180309093346.GF25863@linaro.org Link: http://lkml.kernel.org/r/20180306102303.9063-2-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13mm/gup.c: document return valueMichael S. Tsirkin4-0/+10
__get_user_pages_fast handles errors differently from get_user_pages_fast: the former always returns the number of pages pinned, the later might return a negative error code. Link: http://lkml.kernel.org/r/1522962072-182137-6-git-send-email-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-14MIPS: io: Add barrier after register read in readX()Sinan Kaya1-0/+2
While a barrier is present in the writeX() functions before the register write, a similar barrier is missing in the readX() functions after the register read. This could allow memory accesses following readX() to observe stale data. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19069/ [jhogan@kernel.org: Tidy commit message] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-13Merge tag 'sh-for-4.17' of git://git.libc.org/linux-shLinus Torvalds9-38/+84
Pull arch/sh updates from Rich Felker: "Fixes for bugs in futex, device tree, and userspace breakpoint traps, and for PCI issues on SH7786" * tag 'sh-for-4.17' of git://git.libc.org/linux-sh: arch/sh: pcie-sh7786: handle non-zero DMA offset arch/sh: pcie-sh7786: adjust the memory mapping arch/sh: pcie-sh7786: adjust PCI MEM and IO regions arch/sh: pcie-sh7786: exclude unusable PCI MEM areas arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled arch/sh: pci: don't use disabled resources arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset arch/sh: add sh7786_mm_sel() function sh: fix debug trap failure to process signals before return to user sh: fix memory corruption of unflattened device tree sh: fix futex FUTEX_OP_SET op on userspace addresses
2018-04-13Merge tag 'arm64-upstream' of ↵Linus Torvalds10-199/+242
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Will Deacon: "A few late updates to address some issues arising from conflicts with other trees: - Removal of Qualcomm-specific Spectre-v2 mitigation in favour of the generic SMCCC-based firmware call - Fix EL2 hardening capability checking, which was bodged to reduce conflicts with the KVM tree - Add some currently unused assembler macros for managing SIMD registers which will be used by some crypto code in the next merge window" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: assembler: add macros to conditionally yield the NEON under PREEMPT arm64: assembler: add utility macros to push/pop stack frames arm64: Move the content of bpi.S to hyp-entry.S arm64: Get rid of __smccc_workaround_1_hvc_* arm64: capabilities: Rework EL2 vector hardening entry arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
2018-04-13Merge branch 'for-linus' of ↵Linus Torvalds17-636/+174
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: "Three notable larger changes next to the usual bug fixing: - update the email addresses in MAINTAINERS for the s390 folks to use the simpler linux.ibm.com domain instead of the old linux.vnet.ibm.com - an update for the zcrypt device driver that removes some old and obsolete interfaces and add support for up to 256 crypto adapters - a rework of the IPL aka boot code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits) s390: correct nospec auto detection init order s390/zcrypt: Support up to 256 crypto adapters. s390/zcrypt: Remove deprecated zcrypt proc interface. s390/zcrypt: Remove deprecated ioctls. s390/zcrypt: Make ap init functions static. MAINTAINERS: update s390 maintainers email addresses s390/ipl: remove reipl_method and dump_method s390/ipl: correct kdump reipl block checksum calculation s390/ipl: remove non-existing functions declaration s390: assume diag308 set always works s390/ipl: avoid adding scpdata to cmdline during ftp/dvd boot s390/ipl: correct ipl parmblock valid checks s390/ipl: rely on diag308 store to get ipl info s390/ipl: move ipl_flags to ipl.c s390/ipl: get rid of ipl_ssid and ipl_devno s390/ipl: unite diag308 and scsi boot ipl blocks s390/ipl: ensure loadparm valid flag is set s390/qdio: lock device while installing IRQ handler s390/qdio: clear intparm during shutdown s390/ccwgroup: require at least one ccw device ...
2018-04-13powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU featuresMichael Ellerman2-15/+22
The cpu_has_feature() mechanism has an optimisation where at build time we construct a mask of the CPU feature bits that will always be true for the given .config, based on the platform/bitness/etc. that we are building for. That is incompatible with DT CPU features, where the set of CPU features is dependent on feature flags that are given to us by firmware. The result is that some feature bits can not be *disabled* by DT CPU features. Or more accurately, they can be disabled but they will still appear in the ALWAYS mask, meaning cpu_has_feature() will always return true for them. In the past this hasn't really been a problem because on Book3S 64 (where we support DT CPU features), the set of ALWAYS bits has been very small. That was because we always built for POWER4 and later, meaning the set of common bits was small. The only bit that could be cleared by DT CPU features that was also in the ALWAYS mask was CPU_FTR_NODSISRALIGN, and that was only used in the alignment handler to create a fake DSISR. That code was itself deleted in 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") (Sep 2017). However the set of ALWAYS features changed with the recent commit db5ae1c155af ("powerpc/64s: Refine feature sets for little endian builds") which restricted the set of feature flags when building little endian to Power7 or later. That caused the ALWAYS mask to become much larger for little endian builds. The result is that the following feature bits can currently not be *disabled* by DT CPU features: CPU_FTR_REAL_LE, CPU_FTR_MMCRA, CPU_FTR_CTRL, CPU_FTR_SMT, CPU_FTR_PURR, CPU_FTR_SPURR, CPU_FTR_DSCR, CPU_FTR_PKEY, CPU_FTR_VMX_COPY, CPU_FTR_CFAR, CPU_FTR_HAS_PPR. To fix it we need to mask the set of ALWAYS features with the base set of DT CPU features, ie. the features that are always enabled by DT CPU features. That way there are no bits in the ALWAYS mask that are not also always set by DT CPU features. Fixes: db5ae1c155af ("powerpc/64s: Refine feature sets for little endian builds") Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-12Merge branch 'parisc-4.17-2' of ↵Linus Torvalds10-156/+58
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - fix panic when halting system via "shutdown -h now" - drop own coding in favour of generic CONFIG_COMPAT_BINFMT_ELF implementation - add FPE_CONDTRAP constant: last outstanding parisc-specific cleanup for Eric Biedermans siginfo patches - move some functions to .init and some to .text.hot linker sections * 'parisc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent panic at system halt parisc: Switch to generic COMPAT_BINFMT_ELF parisc: Move cache flush functions into .text.hot section parisc/signal: Add FPE_CONDTRAP for conditional trap handling
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 11:16:25 +0000