summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner6-0/+6
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16arm64: dts: sprd: Add clock properties for serial devicesBaolin Wang1-4/+12
We've introduced power management logics for the Spreadtrum serial controller by commit 062ec2774c8a ("serial: sprd: Add power management for the Spreadtrum serial controller"), thus add related clock properties to support this feature. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16Merge tag 'tegra-for-5.2-arm64-dt-fixes' of ↵Olof Johansson2-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/late arm64: tegra: Device tree fixes for v5.2-rc1 This contains one patch to disable the recently added XUSB support on Jetson TX2 which is reported to cause boot and CPU hotplug failures in some cases and doesn't allow the core power rail to be switched off. Furthermore there are some changes to enable IOMMU support on more devices. This is needed in order to prevent these devices from breaking with the policy change in the ARM SMMU driver to break insecure devices that is currently headed for v5.2. * tag 'tegra-for-5.2-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Disable XUSB support on Jetson TX2 arm64: tegra: Enable SMMU translation for PCI on Tegra186 arm64: tegra: Fix insecure SMMU users for Tegra186 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds151-879/+11682
Pull ARM Device-tree updates from Olof Johansson: "Besides new bindings and additional descriptions of hardware blocks for various SoCs and boards, the main new contents here is: SoCs: - Intel Agilex (SoCFPGA) - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus) New boards: - Allwinner: + RerVision H3-DVK (H3) + Oceanic 5205 5inMFD (H6) + Beelink GS2 (H6) + Orange Pi 3 (H6) - Rockchip: + Orange Pi RK3399 + Nanopi NEO4 + Veyron-Mighty Chromebook variant - Amlogic: + SEI Robotics SEI510 - ST Micro: + stm32mp157a discovery1 + stm32mp157c discovery2 - NXP: + Eckelmann ci4x10 (i.MX6DL) + i.MX8MM EVK (i.MX8MM) + ZII i.MX7 RPU2 (i.MX7) + ZII SPB4 (VF610) + Zii Ultra (i.MX8M) + TQ TQMa7S (i.MX7Solo) + TQ TQMa7D (i.MX7Dual) + Kobo Aura (i.MX50) + Menlosystems M53 (i.MX53)j - Nvidia: + Jetson Nano (Tegra T210)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits) arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge arm64: dts: bitmain: Add pinctrl support for BM1880 SoC arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board arm64: dts: bitmain: Add GPIO support for BM1880 SoC ARM: dts: gemini: Indent DIR-685 partition table dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20 arm64: dts: msm8998: thermal: Fix number of supported sensors arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones arm64: dts: exynos: Move fixed-clocks out of soc arm64: dts: exynos: Move pmu and timer nodes out of soc ARM: dts: s5pv210: Fix camera clock provider on Goni board ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210 ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250 ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250 ARM: dts: exynos: Move pmu and timer nodes out of soc arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64 arm64: dts: db820c: Add sound card support arm64: dts: apq8096-db820c: Add HDMI display support ...
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds4-4/+4
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-14Merge tag 'mfd-next-5.2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
2019-05-14Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
2019-05-14Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones8-43/+43
'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
2019-05-08arm64: tegra: Disable XUSB support on Jetson TX2Thierry Reding1-2/+2
The recently introduced XUSB support for Jetson TX2 is causing boot, CPU hotplug and suspend/resume failures according to several reports. Temporarily work around this by disabling the XUSB controller and XUSB pad controller nodes in device tree, while we figure out what's causing this. Reported-by: Bitan Biswas <bbiswas@nvidia.com> Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Tested-by: Bitan Biswas <bbiswas@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-05-08arm64: tegra: Enable SMMU translation for PCI on Tegra186Thierry Reding1-0/+4
Commit 954a03be033c ("iommu/arm-smmu: Break insecure users by disabling bypass by default") intentionally breaks all devices using the SMMU in bypass mode. This breaks, among other things, PCI support on Tegra186. Fix this by populating the iommus property and friends for the PCIe controller. Fixes: 954a03be033c ("iommu/arm-smmu: Break insecure users by disabling bypass by default") Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-05-08arm64: tegra: Fix insecure SMMU users for Tegra186Jonathan Hunter1-0/+3
Commit 954a03be033c ("iommu/arm-smmu: Break insecure users by disabling bypass by default") intentionally breaks all devices using the SMMU in bypass mode. This is breaking various devices on Tegra186 which include the ethernet, BPMP and HDA device. Fix this by populating the iommus property for these devices with their stream ID. Fixes: 954a03be033c ("iommu/arm-smmu: Break insecure users by disabling bypass by default") Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-05-06Merge tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-12/+13
Pull EDAC updates from Borislav Petkov: - amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam) - skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo) - altera: Stratix10 improvements (Thor Thayer) - The usual round of fixes, fixlets and cleanups * tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: Revert "EDAC/amd64: Support more than two controllers for chip select handling" arm64: dts: stratix10: Use new Stratix10 EDAC bindings Documentation: dt: edac: Add Stratix10 Peripheral bindings Documentation: dt: edac: Fix Stratix10 IRQ bindings EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call EDAC/altera: Initialize peripheral FIFOs in probe() EDAC/altera: Do less intrusive error injection EDAC/amd64: Adjust printed chip select sizes when interleaved EDAC/amd64: Support more than two controllers for chip select handling EDAC/amd64: Recognize x16 symbol size EDAC/amd64: Set maximum channel layer size depending on family EDAC/amd64: Support more than two Unified Memory Controllers EDAC/amd64: Use a macro for iterating over Unified Memory Controllers EDAC/amd64: Add Family 17h Model 30h PCI IDs MAINTAINERS: Add entry for EDAC-I10NM MAINTAINERS: Update entry for EDAC-SKYLAKE EDAC, altera: Fix S10 Double Bit Error Notification EDAC, skx, i10nm: Make skx_common.c a pure library
2019-05-06Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Mostly just incremental improvements here: - Introduce AT_HWCAP2 for advertising CPU features to userspace - Expose SVE2 availability to userspace - Support for "data cache clean to point of deep persistence" (DC PODP) - Honour "mitigations=off" on the cmdline and advertise status via sysfs - CPU timer erratum workaround (Neoverse-N1 #1188873) - Introduce perf PMU driver for the SMMUv3 performance counters - Add config option to disable the kuser helpers page for AArch32 tasks - Futex modifications to ensure liveness under contention - Rework debug exception handling to seperate kernel and user handlers - Non-critical fixes and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits) Documentation: Add ARM64 to kernel-parameters.rst arm64/speculation: Support 'mitigations=' cmdline option arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB arm64: enable generic CPU vulnerabilites support arm64: add sysfs vulnerability show for speculative store bypass arm64: Fix size of __early_cpu_boot_status clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters clocksource/arm_arch_timer: Remove use of workaround static key clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable clocksource/arm_arch_timer: Direcly assign set_next_event workaround arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct ARM: vdso: Remove dependency with the arch_timer driver internals arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1 arm64: Add part number for Neoverse N1 arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32 arm64: mm: Remove pte_unmap_nested() arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable arm64: compat: Reduce address limit for 64K pages ...
2019-04-29Merge tag 'bitmain-soc-5.2' of ↵Olof Johansson2-0/+211
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain into arm/dt Bitmain SoC changes for v5.2: - Added GPIO support for BM1880 SoC based on Designware APB GPIO controller - Added GPIO line names for Sophon Edge board based on 96Boards CE specification for accessing GPIOs using line names from userspace tools like MRAA. - Added pinctrl node for BM1880 SoC as a child node of sctrl syscon node. - Added pinctrl support to UARTs exposed on the Sophon Edge board. * tag 'bitmain-soc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain: arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge arm64: dts: bitmain: Add pinctrl support for BM1880 SoC arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board arm64: dts: bitmain: Add GPIO support for BM1880 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29Merge tag 'imx-dt64-5.2' of ↵Olof Johansson21-13/+2725
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree update for 5.2: - Add initial i.MX8MM SoC and EVK board support. - Enable OPP table for cpufreq support on i.MX8MQ, i.MX8QXP and i.MX8MM. - A series from Andrey Smirnov to enable PCIe support for i.MX8MQ. - Add TMU (Thermal Management Unit) device on i.MX8MQ for managing thermal of CPU, GPU, and VPU. - Add SDMA and SAI2 devices for i.MX8MQ SoC and enable wm8524 audio support on EVK board. - Add LPUART, OCOTP and GPU devices for i.MX8MQ SoC. - Add initial i.MX8MQ based Zii Ultra board support - Add SCU general IRQ and watchdog support for i.MX8QXP. - Add audio related devices and PMU for LS1028A. - Enable SATA and cpuidle support for LX2160A. - Other small random updates. * tag 'imx-dt64-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits) arm64: dts: lx2160a: add cpu idle support arm64: dts: imx8mq: fix GPU clock frequency arm64: dts: fsl: imx8mq-evk: link regulator to GPU domain arm64: dts: imx8mm: Add cpufreq properties arm64: dts: imx8qxp-mek: Add i2c1 with pca9646 arm64: dts: imx8qxp: enable scu general irq channel arm64: dts: imx8mq: add GPU node arm64: dts: imx: add Zii Ultra board support arm64: dts: imx8mq: fix higher CPU operating point arm64: dts: imx8mq-evk: Enable PCIE0 interface arm64: dts: imx8mq: Add nodes for PCIe IP blocks arm64: dts: imx8mq: Combine PCIE power domains arm64: dts: imx8mq: Add a node for SRC IP block arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes arm64: dts: lx2160a: add sata node support arm64: dts: ls1028a: Corrected the SATA ecc address arm64: dts: imx8mq: Change ahb clock for imx8mq arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string arm64: dts: imx8qxp: add system controller watchdog support ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29arm64: dts: bitmain: Add UART pinctrl support for Sophon EdgeManivannan Sadhasivam1-0/+29
Add pinctrl support for UARTs exposed on the Sophon Edge board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-29arm64: dts: bitmain: Add pinctrl support for BM1880 SoCManivannan Sadhasivam1-0/+14
Add pinctrl support for Bitmain BM1880 SoC. This SoC only supports pinmuxing and the pinctrl registers are part of the sctrl block. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-29arm64: dts: bitmain: Add GPIO Line names for Sophon Edge boardManivannan Sadhasivam1-0/+114
Add GPIO line names for Sophon Edge board based on BM1880 SoC from Bitmain. Line names are based on the board schematics as well as the 96Boards Consumer Edition specification v1.0. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-29arm64: dts: bitmain: Add GPIO support for BM1880 SoCManivannan Sadhasivam1-0/+54
Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO controller IP. IP exposes 3 GPIO controllers with a total of 72 pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-28Merge tag 'sunxi-fixes-for-5.1' of ↵Olof Johansson4-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 5.1 - Pinctrl related fixes for the A33 NAND controller - Fix the refcounting of DT nodes in our core code - Fix for a typo'd DT property * tag 'sunxi-fixes-for-5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt64-5.2-2' of ↵Olof Johansson2-52/+54
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.2, second round DTC warning fixes: move fixed-clocks, timer and pmu nodes outside of soc node. * tag 'samsung-dt64-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Move fixed-clocks out of soc arm64: dts: exynos: Move pmu and timer nodes out of soc Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-arm64-for-5.2-1' of ↵Olof Johansson10-47/+668
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.2 - Part 2 * Add ADC temp for temp alarm node on PM8998 * Add ref clks for DSI PHYs on SDM845 and MSM8916 * Add CPU capacity and topology on SDM845 * Add display and gpu related nodes on MSM8996 * Add sound and hdmi display support on DB820C * Fixup thermal nodes on MSM8998 platform * tag 'qcom-arm64-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20 arm64: dts: msm8998: thermal: Fix number of supported sensors arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones arm64: dts: db820c: Add sound card support arm64: dts: apq8096-db820c: Add HDMI display support arm64: dts: Add Adreno GPU definitions arm64: qcom: msm8996.dtsi: Add Display nodes arm64: dts: msm8996: Add display smmu node arm64: dts: msm8996: Add graphics smmu node arm64: dts: sdm845: Add CPU capacity values arm64: dts: sdm845: Add CPU topology arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY arm64: dts: qcom: pm8998: Use ADC temperature to temp-alarm node Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts64-2' of ↵Olof Johansson26-474/+495
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Bulk conversion of remaining gpios to the helper constants, new peripherals for the rk3328-roc-cc and some minor fixes for rk3399 and rockpro64. * tag 'v5.2-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64 arm64: dts: rockchip: fix cts, rts pin assign of UART3 for rk3399 arm64: dts: rockchip: bulk convert gpios to their constant counterparts arm64: dts: rockchip: enable display nodes on rk3328-roc-cc arm64: dts: rockchip: eMMC additions for rk3328-roc-cc Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.1-next-dts64' of ↵Olof Johansson2-4/+1151
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - use assinged-clocks and assigned-clock-parents - fix compatible for SoC to a72 - add pmu nodes mt8183: - add sysirq binding - add pinctrl dt header file mt7629: - update bindings description fo sysirq, uart and scpsys mt8516: - add binding description for watchdog, timer, uart and sysirq * tag 'v5.1-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8173: add pmu nodes for mt8173 arm64: dts: mt8173: correct cpu type of cpu2 and cpu3 to cortex-a72 dt-bindings: irq: mtk,sysirq: add support for MT8516 dt-bindings: serial: mtk-uart: add support for MT8516 dt-bindings: timer: mtk-timer: add support for MT8516 dt-bindings: wdog: mtk-wdt: add support for MT851 dt-bindings: soc: fix a typo for MT7623A dt-bindings: mediatek: update bindings for MT7629 SoC arm64: dts: mt8183: add pinctrl file dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183 arm64: dts: Using standard CCF interface to set vcodec clk Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" propertiesRobin Murphy3-6/+0
The old "cooling-{min,max}-state" properties for thermal bindings were ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level"), which were later removed entirely by commit e04907dbc259 ("dt-bindings: thermal: Remove "cooling-{min|max}-level" properties"). The pwm-fan binding, however, was apparently in-flight in parallel with that ratification, and so managed to introduce an example of the old properties which escaped the scope of the later cleanup and has thus continued to be dutifully copied for new boards despite being useless. Clean up these remaining undocumented anachronisms to minimise any further confusion. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson1-1/+12
mvebu dt64 for 5.2 (part 1) Add wlan_disable signal hog for rfkill signal on clearfog-gt-8k (Armada 8040 based board) * tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu: arm64: dts: clearfog-gt-8k: add wlan_disable signal hog Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-arm64-for-5.2' of ↵Olof Johansson15-110/+1040
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.2 * Add gpio ranges for Qualcomm platforms * Fix MSM8998 BLSP2 I2C5 address * Add MSM8998 UFS nodes and associated information * Add SDM845 interconnect header and usage * Add ADSP and CDSP PAS, RMTFS memory, and UFS phy reset on SDM845 * Update reserved memory map on SDM845 * Add QCS404 spmi regulators, ethernet, bluetooth, and uart3 * Remove remotely-controlled property as default for BAM on QCS404 * Add spmi regulators on PMS405 * Fixup QCS404 l3 voltages and regulator supply names * Fixup thermal trip names on Qualcomm platforms * Add thermal sensors on Qualcomm platforms * Remove invalid efficiency property on MSM8998 * Change QCS404-evb compatible to help distinguish platforms * Add rpmhd header file and convert to use definitions on SDM845 * Add interconnect header file on SDM845 * Add PMS405 ADC binding * tag 'qcom-arm64-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits) arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes arm64: dts: qcom: sdm845: Define rmtfs memory arm64: dts: qcom: sdm845: Update reserved memory map arm64: dts: sdm845: Add UFS PHY reset arm64: dts: qcom: msm8998: Fix blsp2_i2c5 address arm64: dts: qcom: qcs404-evb: Change the compatible to distinguish platforms arm64: dts: qcom: pmi8998: add gpio-ranges arm64: dts: qcom: pmi8994: add gpio-ranges arm64: dts: qcom: pm8998: add gpio-ranges arm64: dts: qcom: pm8005: add gpio-ranges arm64: dts: msm8998: Add UFS phy reset arm64: dts: msm8916: thermal: Convert camera trip type to hot arm64: dts: msm8996: thermal: Make trip names consistent arm64: dts: msm8916: thermal: Make trip names consistent arm64: dts: msm8998: thermal: Make trip names consistent arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals arm64: dts: msm8998: thermal: GPU has two sensors, add the second arm64: dts: msm8998: thermal: Fix the gpu sensor number arm64: dts: msm8998: thermal: Fix the cpu sensor numbers ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt64-2' of ↵Olof Johansson5-0/+601
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.2, round 2 - add display/gfx support for G12a boards - enable USB for g12a boards * tag 'amlogic-dt64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits) arm64: dts: meson-g12a-u200: Add support for Video Display arm64: dts: meson-g12a-sei510: Add support for Video Display arm64: dts: meson-g12a-x96-max: Add support for Video Display arm64: dts: meson-g12a: Add AO-CEC nodes arm64: dts: meson-g12a: Add VPU and HDMI related nodes arm64: dts: meson-g12a-x96-max: Enable USB arm64: dts: meson-g12a-u200: Enable USB arm64: dts: meson-g12a-sei510: Enable USB arm64: dts: meson-g12a-sei510: Add ADC Key and BT support arm64: dts: meson-g12a-u200: add regulators arm64: dts: meson: g12a: Add mali-g31 gpu node arm64: dts: meson: g12a: Add G12A USB nodes arm64: dts: meson: g12a: Add SAR ADC node dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible arm64: dts: meson-gxm: Add Mali-T820 node dt-bindings: gpu: mali-midgard: Add resets property dt-bindings: clock: meson8b: export the video decoder clocks dt-bindings: clock: meson8b: export the VPU clock dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN dt-bindings: clock: meson8b: drop the "ABP" clock definition ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm64-dt2-for-v5.2' of ↵Olof Johansson5-1/+241
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Second Round of Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) SoCs - Describe CMT devices in DT * R-Car M3-N (r8a77965) SoC - Remove unecessary reg-names of display node * R-Car V3H (r8a77980) SoC - Add missing "renesas,id" property to VIN of device tree * RZ/G2E (r8a774c0) based CAT874 board - Add USB-HOST support * tag 'renesas-arm64-dt2-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77980: Add "renesas,id" to VIN arm64: dts: renesas: r8a77965: Remove reg-names of display node arm64: dts: renesas: r8a77990: Add CMT device nodes arm64: dts: renesas: r8a77965: Add CMT device nodes arm64: dts: renesas: r8a7795: Add CMT device nodes arm64: dts: renesas: cat874: Add USB-HOST support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-h3-h5-for-5.2' of ↵Olof Johansson9-15/+13
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3/H5 changes for 5.2 Our usual bunch of changes shared between arm and arm64, the most notable one being: - Fix of improper usage of DT bindings, thanks to the DT validation - Add the SID for the H3 and H5 - New board: RerVision H3-DVK * tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: mapleboard: Remove cd-inverted ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board ARM: dts: sun8i: h3: Add default dr_mode ARM: dts: sun8i: h3: Refactor the pinctrl node names ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry ARM: dts: sunxi: h3/h5: Add device node for SID ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-dt64-for-5.2' of ↵Olof Johansson11-34/+714
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner arm64 DT changes for 5.2 Our usual bunch of patches, the most notable one being: - Fixing the DTC warnings - Fix DT bindings not being properly respected, thanks to the DT validation - New Board: Oceanic 5205, Beelink GS1, Orange Pi3 * tag 'sunxi-dt64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits) arm64: dts: allwinner: a64-amarula-relic: Add OV5640 camera node arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1 arm64: dts: allwinner: Fix DE2 bus node name arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI arm64: dts: allwinner: h6: Add MMC1 pins arm64: dts: allwinner: h6: Add Orange Pi 3 DTS arm64: dts: allwinner: h6: Introduce Beelink GS1 board dt-bindings: vendor-prefixes: add AZW arm64: dts: allwinner: h6: move MMC pinctrl to dtsi arm64: dts: allwinner: h6: Add device node for SID arm64: dts: allwinner: a64: Fix the Codec I2S binding arm64: dts: allwinner: a64: Add default dr_mode arm64: dts: allwinner: Fix pinctrl node names arm64: dts: allwinner: a64: Add missing PIO clocks arm64: dts: allwinner: a64: Fix display pipeline endpoints arm64: dts: allwinner: a64: Fix the TCON output clock arm64: dts: allwinner: h6: Add Video Engine node arm64: dts: allwinner: a64: Add cross links for the mixers arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support dt-bindings: Add vendor prefix for oceanic ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-dt-for-5.2' of ↵Olof Johansson4-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.2 This PR is pretty significant, but it been mostly about: - Fixing the DTC warnings in most of our DT. We're now down to 2 warnings, from several thousands. - Fixing a good number of minor issues, typos, and so on thanks to the DT validation tools - Describe the MBUS controller and the special DMA RAM mapping on the A13 - Add support for the LRADC on the A83t - Add support for the I2C bus used for the PMIC on the A33 - Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes * tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits) ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards ARM: dtsi: axp81x: add USB power supply node ARM: dts: sun5i: Reorder pinctrl nodes ARM: dts: sun6i: i7: Remove useless property ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences. ARM: dts: sun5i: Add the MBUS controller dt-bindings: sunxi: Add compatible for OrangePi 3 board ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins dt-bindings: arm: sunxi: Add Beelink GS1 board ARM: dts: sun8i: tbs-a711: Add support for volume keys input ARM: dts: sunxi: Add R_LRADC support for A83T ARM: dts: sunxi: Improve A33 NAND transfers by using DMA ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module) ARM: dts: sunxi: Remove useless pinctrl nodes ARM: dts: sunxi: Remove pinctrl groups setting bias ARM: dts: sunxi: Remove useless address and size cells ARM: dts: sunxi: Conform to DT spec for NAND controller ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm64-dt' of ↵Olof Johansson12-32/+999
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.2-rc1 This contains a bunch of changes all across the board. Perhaps the most notable introduction here is support for the Jetson Nano Developer Kit. * tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Remove regulator hacks on Jetson TX2 arm64: tegra: Enable XUSB on P2771 arm64: tegra: Add XUSB and pad controller on Tegra186 arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support arm64: tegra: smaug: Move PLL power supplies to XUSB pad controller arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller arm64: tegra: Enable command queue for Tegra186 SDMMC4 arm64: tegra: Fix default tap and trim values arm64: tegra: Add supply for temperature sensor on P2888 arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1 arm64: tegra: Add L2 cache topology to Tegra210 arm64: tegra: Enable CPU idle support for Shield arm64: tegra: Enable CPU idle support for Smaug arm64: tegra: Enable CPU idle support for Jetson TX1 arm64: tegra: Add CPU idle states properties for Tegra210 arm64: tegra: Fix timer node for Tegra210 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'socfpga_dts_updates_for_v5.2' of ↵Olof Johansson5-1/+523
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.2 - Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz * tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA arm64: dts: stratix10: increase QSPI max frequency to 100MHz arm64: dts: stratix10: enable MMC highspeed support ARM: dts: socfpga: enable MMC highspeed support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson4-1/+271
into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.2 * Hi3660 SoC and related boards: - Added DMA support for the uart nodes - Added the asp DMA controller node - Replaced dma-min-chan with dma-channel-mask to follow the binding * Hi3670 SoC and related boards: - Reused Hi3660 reset to support Hi3670, updated the binding document and added dts node - Reused Hi3660 MMC controller to support Hi3670, updated the binding document and added related nodes to support SD and WiFi for the SoC and hikey970 board - Added UFS controller node * tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: hi3670: Add UFS controller support arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask arm64: dts: hi3660: Add hisi asp dma device arm64: dts: hi3660: Add dma to uart nodes arm64: dts: hisilicon: hikey970: Add SD and WiFi support arm64: dts: hisilicon: hi3670: Add MMC controller support dt-bindings: mmc: Add HI3670 MMC controller binding arm64: dts: hisilicon: hi3670: Add reset controller support dt-bindings: reset: Add HI3670 reset controller binding Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson6-0/+6
arm/dt arm64: dts: zynqmp: DT changes for v5.2 - Align xlnx-zynqmp-clk.h file name and separate binding for clock driver - Add TI quirks to zynqmp boards * tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: dt: Add TI PHY quirk dt-bindings: xilinx: Separate clock binding from firmware doc include: dt-binding: clock: Rename zynqmp header file Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt64-5.2' of ↵Olof Johansson3-12/+34
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.2 1. Use proper clock rates for GSCALER module on TM2 boards. 2. Add clocks for local paths on DECON and GSCALER modules of Exynos5433. 3. Add Slim SecuritySubSystem to Exynos5433. * tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add SlimSSS to Exynos5433 arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433 arm64: dts: exynos: configure GSCALER related clocks on TM2 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm64-dt-for-v5.2' of ↵Olof Johansson13-58/+499
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car Gen3 SoC based Salvator-X and Salvator-XS boards - Add GPIO keys support - Sort rwdt node alphabetically * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Use extended audio DMAC register * R-Car M3-W (r8a7796) SoC - Remove unneeded sound #address/size-cells * R-Car M3-N (r8a77965) SoC - Add SSIU support for audio * R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs - Remove invalid compatible value for CSI40 * R-Car E3 (r8a77990) SoC - Cprrect SPDX license identifier style * R-Car E3 (r8a77990) based Ebisu board - Add BD9571 PMIC with DDR0 backup power config - Correct adv7482 hexadecimal register address - Add GPIO expander * R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards - Update bootargs to bring them into line with other R-Car Gen3 boards - Enable LVDS1 encoder * R-Car D3 (r8a77995) based Draak board - Correct EthernetAVB phy mode - Enable CAN0 and CAN1 * RZ/G2E (r8a774c0) SoC - Add CANFD support - Correct CPU node style * RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs - Add clkp2 clock to CAN nodes * RZ/G2E (r8a774c0) based EK874 board - Add LED, CAN and RTC support * tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits) arm64: dts: renesas: salvator-common: Add GPIO keys support arm64: dts: renesas: use extended audio dmac register arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii arm64: dts: renesas: salvator-common: Sort node label arm64: dts: renesas: Update Ebisu and Draak bootargs arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes arm64: dts: renesas: r8a774c0: Add CANFD support arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1 arm64: dts: renesas: r8a774c0-cat874: Add RWDT support arm64: dts: renesas: ebisu: Enable VIN5 arm64: dts: renesas: r8a774c0-cat874: Add LEDs support arm64: dts: renesas: r8a774c0-cat874: add RTC support arm64: dts: renesas: cat875: Add CAN support arm64: dts: renesas: r8a774c0: Fix cpu nodes style arm64: dts: renesas: r8a77965: add SSIU support for sound ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts64-1' of ↵Olof Johansson13-21/+1050
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Core new soc features are hdmi-cec for rk3328, scheduler capacity-values and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also directly got some additional features added after the boards itself. The Rock960 family (rock960+ficus) got their power-tree cleaned to match the schematics and also got hdmi-audio and their gpu enabled. Mali support also got enabled on the RockPi4 and finally both rk3328-rock64 and rk3328-roc-cc got some additional features. * tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits) arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy. arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller. arm64: dts: rockchip: Add nanopi4 ethernet phy arm64: dts: rockchip: Add PWM fan for NanoPC-T4 arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911) arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960 arm64: dts: rockchip: Add Nanopi NEO4 initial support arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64 arm64: dts: rockchip: Add support for the Orange Pi RK3399 board. arm64: dts: rockchip: enable mali on rock960 boards arm64: dts: rockchip: enable mali on Rock Pi 4 arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes arm64: dts: rockchip: give some life to the rk3328-roc-cc leds arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 arm64: dts: rockchip: add ir-receiver node on rk3328-rock64 arm64: dts: rockchip: add leds node on rk3328-rock64 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt64' of ↵Olof Johansson7-0/+378
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.2 Highlights - new board: SEI Robotics 510, based on S905X2 SoC (G12A) - enable more periphearls for S905X2 based boards * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12a: Add CMA reserved memory arm64: dts: meson-g12a-x96-max: Enable BT Module arm64: dts: meson-g12a-x96-max: add regulators arm64: dts: meson-g12a-sei510: add regulators arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl arm64: dts: meson-g12a-sei510: add uart_AO pinctrl arm64: dts: meson-g12a-u200: add uart_AO pinctrl arm64: dts: meson: g12a: Add UART A, B & C nodes and pins arm64: dts: meson: g12a: add reset controller arm64: dts: meson: g12a: add uart_ao_a pinctrl arm64: dts: meson: g12a: add pinctrl support controllers arm64: dts: meson: g12a: Add AO Clock + Reset Controller support arm64: dts: meson-gxm-nexbox-a1: Enable USB arm64: dts: meson: g12a: add efuse arm64: dts: meson: g12a: add secure monitor arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED arm64: dts: meson-g12a: Add AO Secure node arm64: dts: Add SEI Robotics SEI510 Board vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-25arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20Amit Kucheria1-2/+2
The thermal core restricts names of thermal zones to under 20 characters. Fix the names for a couple of msm8998 thermal zones. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-25arm64: dts: msm8998: thermal: Fix number of supported sensorsAmit Kucheria1-1/+1
msm8998 has 22 sensors connected in total, 14 on the 1st controller, 8 on the 2nd controller. Increase the number to allow sensors with ID 12 and 13 to be registered. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-25arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zonesAmit Kucheria1-38/+0
The msm8998-mtp doesn't have TSENS-based sensors wired up for skin and battery thermal zones. TSENS sensors should be common across all boards using the SoC and shouldn't be board-specific as these entries. They also show the following error when trying to read the temperature cat: read error: Invalid argument Remove these board-specific erroneous thermal zones. Fixes: 4449b6f248d9 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones") Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-24arm64: dts: exynos: Move fixed-clocks out of socKrzysztof Kozlowski2-12/+14
The XXTI fixed-clock is the input to the SoC therefore it should not be inside the soc node. This also fixes DTC W=1 warning: arch/arm64/boot/dts/exynos/exynos7.dtsi:90.17-94.5: Warning (simple_bus_reg): /soc/xxti: missing or empty reg/ranges property While moving, change the name of the xxti node to match the generic type of device (following DeviceTree specification). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24arm64: dts: exynos: Move pmu and timer nodes out of socKrzysztof Kozlowski2-40/+40
The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like: arch/arm64/boot/dts/exynos/exynos7.dtsi:472.11-480.5: Warning (simple_bus_reg): /soc/arm-pmu: missing or empty reg/ranges property arch/arm64/boot/dts/exynos/exynos7.dtsi:482.9-492.5: Warning (simple_bus_reg): /soc/timer: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-23arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64Katsuhiro Suzuki1-1/+1
This patch fixes IO domain voltage setting that is related to audio_gpio3d4a_ms (bit 1) of GRF_IO_VSEL. This is because RockPro64 schematics P.16 says that regulator supplies 3.0V power to APIO5_VDD. So audio_gpio3d4a_ms bit should be clear (means 3.0V). Power domain map is saying different thing (supplies 1.8V) but I believe P.16 is actual connectings. Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Cc: stable@vger.kernel.org Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-23arm64: dts: db820c: Add sound card supportSrinivas Kandagatla4-0/+286
This patch adds support both digital and analog audio on DB820c. This board has HDMI port and 3.5mm audio jack to support both digital and analog audio respectively. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-23arm64: dts: apq8096-db820c: Add HDMI display supportArchit Taneja2-0/+79
The APQ8096 DB820c platform provides HDMI output. The MDSS block on 8x96 supports a direct HDMI out. Populate the MDSS, MDP and HDMI DT nodes. Also, add the HDMI HPD and DDC pinctrl nodes with the bias and driver strength specified for this platform. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-23arm64: dts: Add Adreno GPU definitionsJordan Crouse1-0/+86
Add an initial node for the Adreno GPU. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-23arm64: qcom: msm8996.dtsi: Add Display nodesArchit Taneja1-0/+120
Signed-off-by: Archit Taneja <architt@codeaurora.org> [Removed instances of mmagic clocks; Use qcom,msm8996-smmu-v2 bindings] Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-09 00:43:53 +0000