summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-07-09IB/ipath: return correct PortGUID in NodeInfoSean Hefty1-1/+1
Return the PortGUID of the correct port when responding to a NodeInfo query. Returning the SystemImageGUID causes issues when there are multiple HCAs in a single system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB: Update mailing list addressRoland Dreier1-3/+3
The InfiniBand / RDMA discussion list has moved. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Remove bogus RD_ATOMIC checks from modify_qpArthur Jones1-8/+0
The changeset 3859e39d ("IB/ipath: Support larger IB_QP_MAX_DEST_RD_ATOMIC and IB_QP_MAX_QP_RD_ATOMIC") added support for larger RD_ATOMIC values, but it failed to take out the stricter checks that were before these and hence had no effect. This patch takes out the bogus checks.... Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Test interrupts at driver startupArthur Jones3-0/+31
All too often, interrupts do not get enabled for our card due to BIOS misconfiguration and other issues. This patch checks for that condition on startup and warns the user. This patch is based on work (check LID availability) by Robert Walsh. Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Remove support for preproduction HTX InfiniPath cardsRalph Campbell4-48/+12
Clean up some code by removing support for some older pre-production HTX InfiniPath cards. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
2007-07-09IB/ipath: Change version wording to be less confusing with release numberDave Olson1-1/+1
Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Lower default number of kernel send buffersRalph Campbell1-1/+1
The default calculation for the number of send buffers to allocate to the kernel was too high for the PCIe version of the chip thus leaving fewer than desired send buffers for user MPI applications. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Update MAINTAINERS entryArthur Jones1-3/+4
Bryan is no longer with QLogic and we now have a public git server and a public email alias for infinipath driver patches. And, as pointed out by Hal Rosenstock, the mailing list has changed as well. Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Be more cautious about coming out of freeze modeDave Olson4-20/+80
We are more careful to be sure that we don't lose information about changes that occurred while we were in freeze mode, when the chip will not notify us, and try to avoid false error interrupts while doing cleanup. Put all of this logic in a new function ipath_clear_freeze(). Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Add barrier before updating WC head in shared memoryRalph Campbell5-1/+12
Add a barrier to make sure the CPU doesn't reorder writes to memory, since user programs can be polling on the head index update and the entry should be written before that. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB: Use menuconfig for InfiniBand menuJan Engelhardt10-17/+15
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09RDMA/cxgb3: Check return of kmalloc() in iwch_register_device()WANG Cong1-3/+4
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> [ Also remove cast from void * return of kmalloc() as suggested by Jesper Juhl <jesper.juhl@gmail.com>. ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09RDMA/cxgb3: Don't abort after failures sending the mpa replySteve Wise1-1/+0
This bug results in an abort request being sent down _after_ the tid has been released. If the tid happens to have been reused, then the subsequent generation of the tid gets incorrectly aborted. The thread running iwch_accecpt_cr() must not abort a connection if an error is returned after being awakened. If any errors did occur while iwch_accept_cr() is blocked, then the connection has already been aborted on the thread processing the error. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09RDMA/cxgb3: Don't post TID_RELEASE messageSteve Wise1-3/+10
The LLD does this for us in cxgb3_remove_tid(). Also fixed active open failure cases where we also shouldn't be releasing the TID. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09RDMA/cxgb3: ctrl-qp init/clear shouldn't set the gen bitSteve Wise1-2/+2
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09RDMA/cxgb3: Don't count neg_adv abort_req_rss messages as real abortsSteve Wise1-7/+7
Negative advice messages should _not_ count toward the 2 abort requests needed to indicate an abort request. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09RDMA/cxgb3: TERMINATE WRs can hang the tx ofld queueSteve Wise1-3/+3
Don't set the gen bits nor length bits in the terminate WR. This is done by the LLD driver. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09RDMA/cxgb3: Streaming -> RDMA mode transition fixesSteve Wise6-53/+38
Due to a HW issue, our current scheme to transition the connection from streaming to rdma mode is broken on the passive side. The firmware and driver now support a new transition scheme for the passive side: - driver posts rdma_init_wr (now including the initial receive seqno) - driver posts last streaming message via TX_DATA message (MPA start response) - uP atomically sends the last streaming message and transitions the tcb to rdma mode. - driver waits for wr_ack indicating the last streaming message was ACKed. NOTE: This change also bumps the required firmware version to 4.3. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09mlx4_core: Get the maximum message size from reported device capabilitiesDotan Barak5-1/+7
Get the maximum message size from the device capabilities returned from the QUERY_DEV_CAP firmware command, rather than hard-coding 2 GB. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Update copyright datesJohn Gregor32-32/+32
Now that it's June, it's about time to update the copyright notices of files that have changed. Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Clean send flags properly on QP resetRobert Walsh1-1/+1
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: ipath_poll fixups and enhancementsRobert Walsh4-51/+131
Fix ipath_poll and enhance it so we can poll for urgent packets or regular packets and receive notifications of when a header queue overflows. Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Send ACK invalid where appropriateRobert Walsh2-10/+25
The IB specification ch. 9.9.3 table 58 says that a QP which isn't set up for the operation should return a NAK invalid request. Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Add capability to modify PBC wordMichael Albaugh2-6/+52
During compliance testing and when debugging some interconnect issues, it is very useful to be able to send malformed packets, without having the device signal them as malformed (drop, or terminate with EBP). The hardware supports this, but the driver "diagnostic packet" interface did not. Extend capability to send specific malformed packets for testing. Signed-off-by: Michael Albaugh <Michael.Albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Make handling of one subport consistentMark Debbage1-2/+2
Previously the driver and userspace code handled the case of 1 subport somewhat inconsistently. The new interpretation of this situation is that if one subport is requested, the driver turns on the subport mechanism and arranges for the port to be "shared" by one process. In normal use the userspace library does not use this configuration and instead arranges for the port not to be shared at all. This particular idiom can be useful for testing purposes. Signed-off-by: Mark Debbage <mark.debbage@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Correct checking of swminor version field when using subportsMark Debbage1-9/+55
When subports are required to run a program, this patch checks that the driver and the userspace library have compatible subport implementations. This is achieved through checks on the swminor version field built into the driver and userspace library. Bad combinations are reported through syslog and result in an error when opening the port. Signed-off-by: Mark Debbage <mark.debbage@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Duplicate RDMA reads can cause responder to NAK inappropriatelyRalph Campbell2-5/+34
A duplicate RDMA read request can fool the responder into NAKing a new RDMA read request because the responder wasn't keeping track of whether the queue of RDMA read requests had been sent at least once. For example, requester sends 4 2K byte RDMA read requests, times out, and resends the first, then sees the 4 responses, then sends a 5th RDMA read or atomic operation. The responder sees the 4 requests, sends 4 responses, sees the resent 1st request, rewinds the queue, then sees the 5th request but thinks the queue is full and that the requester is invalidly sending a 5th new request. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix possible data corruption if multiple SGEs used for receiveRalph Campbell3-2/+10
The code to copy data from the receive queue buffers to the IB SGEs doesn't check the SGE length, only the memory region/page length when copying data. This could overwrite parts of the user's memory that were not intended to be written. It can only happen if multiple SGEs are used to describe a receive buffer which almost never happens in practice. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Wait for PIO available interruptRalph Campbell2-4/+3
The send function is called when posting new send work requests. There is no point in trying to send a packet if the QP is already waiting for a HW send buffer so don't clear the busy bit until the buffer available interrupt happens. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix RDMA read retry codeRalph Campbell1-19/+38
A RDMA read response or atomic response can ACK earlier sends and RDMA writes. In this case, the wrong work request pointer was being used to store the read first response or atomic result. Also, if a RDMA read request is retried, the code to compute which request to resend was incorrect. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Use S_ABORT not cancel and abort on exit freeze mode after recoveryDave Olson6-38/+68
This centralizes the use of the abort functionality, removes the unneeded buffer cancel (abort does the same thing), sets up to ignore launch errors after abort, same as cancel. We need abort on exit from freeze mode to avoid having buffers stuck in the busy state, if a user process happened to complete the send while we were in freeze mode doing the recovery. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix the mtrr_add args for chips with 2 buffer sizesDave Olson1-5/+22
The values passed have never been right for iba 6120 chips, but just happened to work. We needed to select the right buffer offset in the chip (both are in same register), and the total length was wrong also, but was covered by the rounding up. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Change use of constants for TID type to defined valuesJoan Eslinger4-15/+24
Define pkt rcvd 'type' in a way consistent with HW spec and chips. The hardware considers received packets of type 0 to be expected, and type 1 to be eager. The driver was calling the ipath_f_put_tid functions using a variable called 'type' set to 0 for eager and to 1 for expected packets. Worse, the iba6110 and iba6120 drivers used those values inconsistently. This was quite confusing. Now everything is consistent with the hardware. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Set M bit in BTH according to IB specRalph Campbell2-4/+4
According to chapter 17.2.8.1.1, QPs start in the migrated state and should send packets with the M bit set in the BTH. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix local loopback bug when waiting for resourcesRalph Campbell1-1/+1
This patch fixes a minor bug where the wrong QP was checked for a send work request that should wait for an RNR timeout. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix problem with next WQE after a UC completionRalph Campbell1-2/+3
This patch fixes a bug introduced when moving some code around for readability. Setting the wqe pointer at the end of the function is a NOP since it isn't used. Move it back to where it is used. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fill in some missing FMR-related fields in query_deviceRobert Walsh1-0/+2
In ipath_query_device(), some of the struct ib_device_attr fields were not being initialized. Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix maximum MTU reportingRobert Walsh5-5/+30
Although our chip supports 4K MTUs, our driver doesn't yet support this feature, so limit the maximum MTU to 2K until we get support for 4K MTUs implemented. Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Support the IBA6110 revision 4Dave Olson1-2/+2
Recognize IBA 6110 Revision 4: same feature set, etc. as earlier revisions. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Log "active" time and some errors to EEPROMMichael Albaugh9-8/+370
We currently track various errors, now we enhance that capability by logging some of them to EEPROM. We also now log a cumulative "active" time defined by traffic though the InfiniPath HCA beyond the normal SM traffic. Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Remove incompletely implemented ipath_runtime flags and codeJohn Gregor2-27/+1
The IPATH_RUNTIME_PBC_REWRITE and the IPATH_RUNTIME_LOOSE_DMA_ALIGN flags were not ever implemented correctly and did not turn out to be necessary. Remove the last vestiges of these flags but mark the spot with a comment to remind us to not reuse these flags in the interest of binary compatibility. The INFINIPATH_XGXS_SUPPRESS_ARMLAUNCH_ERR bit was also not found to be useful, so it was dropped in the cleanup as well. Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Lock and always use shadow copies of GPIO registerMichael Albaugh5-30/+53
The new LED blinking interface adds more contention for the unprotected GPIO pins that were already shared, though not commonly at the same time. We add locks to the accesses to these pins so that Read-Modify-Write is now safe. Some of these locks are added at interrupt context, so we shadow the registers which drive and inspect these pins to avoid the mmio read/writes. This mitigates the effects of the locks and hastens us through the interrupt. Add locking and always use shadows for registers controlling GPIO pins (ExtCtrl and GPIOout). The use of shadows implies doing less I/O, which can make I2C operation too fast on some platforms. An explicit udelay(1) in SCL manipulation fixes that. Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Support blinking LEDs with an led_override fileMichael Albaugh5-1/+149
When we want to find an InfiniPath HCA in a rack of nodes, it is often expeditious to blink the status LEDs via a userspace /sys file. A write-only led_override "file" is published per device. Writes to this file are interpreted as (string form) numbers, and the resulting value sent to ipath_set_led_override(). The upper eight bits are interpretted as a 4.4 fixed-point "frequency in Hertz", and the bottom two 4-bit values are alternately (D0..3, then D4..7) used by the board-specific LED-setting function to override the normal state. Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Include <linux/vmalloc.h> to fix ppc64 buildBryan O'Sullivan1-0/+1
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09mlx4_core: Include linux/mutex.h from mlx4.hMichael S. Tsirkin1-0/+1
mlx4.h uses struct mutex, so although <linux/mutex.h> seems to be pulled in indirectly by one of the headers it includes, the right thing to do is to include <linux/mutex.h> directly. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/mlx4: Include linux/mutex.h from mlx4_ib.hMichael S. Tsirkin1-0/+1
mlx4_ib.h uses struct mutex, so although <linux/mutex.h> seems to be pulled in indirectly by one of the headers it includes, the right thing is to include <linux/mutex.h> directly. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB: Fix ib_umem_get() when npages == 0Andrew Morton1-0/+1
gcc correctly warned: drivers/infiniband/core/umem.c: In function 'ib_umem_get': drivers/infiniband/core/umem.c:78: warning: 'ret' may be used uninitialized in this function Set ret to 0 in case npages == 0 and the loop isn't entered at all. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB: Remove garbage non-ASCII characters from commentsRoland Dreier3-3/+3
A few files had 0xa0 characters in comments. Remove them so that the files are clean ASCII text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ehca: Refactor "maybe missed event" codeJoachim Fenkes2-19/+11
Refactor the ehca changes from commit ed23a727 ("IB: Return "maybe missed event" hint from ib_req_notify_cq()") so the queue arithmetic is done in slightly fewer lines. Also, move the spinlock flags into the block they're used in. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/mad: Enhance SMI for switch supportHal Rosenstock4-15/+72
Extend the SMI with switch (intermediate hop) support. Care has been taken to ensure that the CA (and router) code paths are changed as little as possible. Signed-off-by: Suresh Shelvapille <suri@baymicrosystems.com> Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>