summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-06-10sunrpc/auth_gss: Call rcu_barrier() on module unload.Jesper Dangaard Brouer1-0/+1
As the module uses rcu_call() we should make sure that all rcu callback has been completed before removing the code. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10sctp: protocol.c call rcu_barrier() on unload.Jesper Dangaard Brouer1-0/+2
On module unload call rcu_barrier(), this is needed as synchronize_rcu() is not strong enough. The kmem_cache_destroy() does invoke synchronize_rcu() but it does not provide same protection. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10can: af_can.c use rcu_barrier() on module unload.Jesper Dangaard Brouer1-0/+2
This module uses rcu_call() thus it should use rcu_barrier() on module unload. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10nfnetlink_queue: Use rcu_barrier() on module unload.Jesper Dangaard Brouer1-1/+3
This module uses rcu_call() thus it should use rcu_barrier() on module unload. Also fixed a trivial typo 'nfetlink' -> 'nfnetlink' in comment. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-108021q: Vlan driver should use rcu_barrier() on unload instead of ↵Jesper Dangaard Brouer1-1/+1
syncronize_net() The VLAN 8021q driver needs to call rcu_barrier() when unloading the module, instead of syncronize_net(). This is needed to make sure that outstanding call_rcu() callbacks have completed, before the callback function code is removed on module unload. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: bugfix: Get rid of errant spin_unlock().Ron Mercer1-1/+0
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add set TX csum ethtool op.Ron Mercer1-0/+1
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add support for varied pcie function numbers.Ron Mercer2-6/+68
Currently we support only PCIe NIC functions zero and one, and FCoE functions as 3 and 4. Future configurations can mix these up in any fashion. This patch removes the 0-1 dependancy and allows usage of any of the 4 functions. We also find the alternate NIC function (if exist) and determine our port number based on the comparison of the two functions: Lower function number gets first port, higher function gets second port. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add support for using alternate MAC address.Ron Mercer1-2/+15
Extract either manufacturer or Bladecenter Open Fabric Manager (BOFM) MAC address. BOFM may indicate an alternate MAC address. This patch honors that request by extracting the MAC address from a different flash location if a flag is set. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Drop inbound frames > MTU.Ron Mercer1-0/+9
The max frame size register is set higher than the MTU to accomodate FCoE frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Drop inbound error frames.Ron Mercer1-1/+7
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Remove netif_set_gso_max_size() call.Ron Mercer1-1/+0
Not necessary if hardware supports 65536 as it's the default setting. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add support for retrieving firmware version.Ron Mercer4-1/+47
This is used by driver banner and ethtool info. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09netfilter: Fix extra semi-colon in skb_walk_frags() changes.David S. Miller1-1/+1
Noticed by Jesper Dangaard Brouer Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09rfkill: include err.hJohannes Berg1-0/+1
Since we use ERR_PTR and similar macros, we need to include linux/err.h. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09bnx2: no need to check before vfreeingBreno Leitao1-4/+2
There is no need to check if a pointer is NULL before calling vfree(), since vfree() function already check for it. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09ixgbe: Include offloaded FCoE data into total rx/tx statistics for 82599Yi Zou3-5/+42
Include offloaded FCoE data into total rx/tx statistics for 82599 so they are properly reflected by ethtool or ifconfig. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09e1000e: Expose MDI-X status via ethtool changeChaitanya Lala2-1/+16
Ethtool is a standard way of getting information about ethernet interfaces. We enhance ethtool kernel interface & e1000e to make the MDI-X status readable via ethtool in userspace. Signed-off-by: Chaitanya Lala <clala@riverbed.com> Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09e1000e: Call e1000e_config_collision_dist() after TCTL has been setSimon Horman1-2/+2
e1000e_config_collision_dist() sets tctl, but subsequently tctl is overwritten. It seems to me that as things stand the call to e1000e_config_collision_dist() has no effect and should either be removed or moved down a little bit. This kernel patch takes the latter option. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09e1000e: Fixes possible phy corrupton on 82571 designs.Dave Graham3-7/+83
Phy corruption has been observed on 2-port 82571 adapters, and is root-caused to lack of synchronization between the 2 driver instances, which conflict when attempting to access the phy via the single MDIC register. A semaphore exists for this purpose, and is now used on these designs. Because PXE &/or EFI boot code (which we cannot expect to be built with this fix) may leave the inter-instance semaphore in an invalid initial state when the driver first loads, this fix also includes a one-time (per driver load) fix-up of the semaphore initial state. Signed-off-by: dave graham <david.graham@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09ieee802154: add simple HardMAC driver sampleSergey Lapin5-0/+298
fakehard is a really simple driver implementing only necessary callbacks and serves the role of an example of driver for HardMAC IEEE 802.15.4 device. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09ieee802154: add documentation about our stackSergey Lapin2-0/+88
Add MAINTAINERS entry and a small text describing our stack interfaces, how to hook the drivers, etc. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09net: add NL802154 interface for configuration of 802.15.4 devicesSergey Lapin5-1/+737
Add a netlink interface for configuration of IEEE 802.15.4 device. Also this interface specifies events notification sent by devices towards higher layers. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09net: add IEEE 802.15.4 socket family implementationSergey Lapin11-0/+1409
Add support for communication over IEEE 802.15.4 networks. This implementation is neither certified nor complete, but aims to that goal. This commit contains only the socket interface for communication over IEEE 802.15.4 networks. One can either send RAW datagrams or use SOCK_DGRAM to encapsulate data inside normal IEEE 802.15.4 packets. Configuration interface, drivers and software MAC 802.15.4 implementation will follow. Initial implementation was done by Maxim Gorbachyov, Maxim Osipov and Pavel Smolensky as a research project at Siemens AG. Later the stack was heavily reworked to better suit the linux networking model, and is now maitained as an open project partially sponsored by Siemens. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09Add constants for the ieee 802.15.4 stackSergey Lapin5-3/+13
IEEE 802.15.4 stack requires several constants to be defined/adjusted. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09pkt_sched: Change PSCHED_SHIFT from 10 to 6Jarek Poplawski1-2/+2
Change PSCHED_SHIFT from 10 to 6 to increase schedulers time resolution. This will increase 16x a number of (internal) ticks per nanosecond, and is needed to improve accuracy of schedulers based on rate tables, like HTB, TBF or CBQ, with rates above 100Mbit. It is assumed this change is safe for 32bit accounting of time diffs up to 2 minutes, which should be enough for common use (extremely low rate values may overflow, so get inaccurate instead). To make full use of this change an updated iproute2 will be needed. (But using older iproute2 should be safe too.) This change breaks ticks - microseconds similarity, so some minor code fixes might be needed. It is also planned to change naming adequately eg. to PSCHED_TICKS2NS() etc. in the near future. Reported-by: Antonio Almeida <vexwek@gmail.com> Tested-by: Antonio Almeida <vexwek@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09pkt_sched: Use PSCHED_SHIFT in PSCHED time conversionJarek Poplawski2-5/+8
Use PSCHED_SHIFT constant instead of '10' in PSCHED_US2NS() and PSCHED_NS2US() macros to enable changing this value later. Additionally use PSCHED_SHIFT in sch_hfsc SM_SHIFT and ISM_SHIFT definitions. This part of the patch is based on feedback from Patrick McHardy <kaber@trash.net>. Reported-by: Antonio Almeida <vexwek@gmail.com> Tested-by: Antonio Almeida <vexwek@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09net: dev_addr_init() fixEric Dumazet1-2/+2
commit f001fde5eadd915f4858d22ed70d7040f48767cf (net: introduce a list of device addresses dev_addr_list (v6)) added one regression Vegard Nossum found in its testings. With kmemcheck help, Vegard found some uninitialized memory was read and reported to user, potentialy leaking kernel data. ( thread can be found on http://lkml.org/lkml/2009/5/30/177 ) dev_addr_init() incorrectly uses sizeof() operator. We were initializing one byte instead of MAX_ADDR_LEN bytes. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09be2net: Remove unnecessary frag list traversing.David S. Miller1-31/+25
This driver does not indicate support for frag lists. Furthermore, even if it did, the code is walking the frag lists incorrectly. The idiom is: for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next) but it's doing: for (iter = skb_shinfo(skb)->frag_list; iter; iter = skb_shinfo(iter)->frag_list) which would never work. And this proves that this driver never saw an SKB with active frag lists. So just remove the code altogether and the driver TX path becomes much simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09xfrm: Use frag list abstraction interfaces.David S. Miller1-22/+19
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09sctp: Use frag list abstraction interfaces.David S. Miller3-9/+8
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09phonet: Use frag list abstraction interfaces.David S. Miller2-4/+4
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09netfilter: Use frag list abstraction interfaces.David S. Miller2-4/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09ipv6: Use frag list abstraction interfaces.David S. Miller2-5/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09ipv4: Use frag list abstraction interfaces.David S. Miller2-5/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09net/core/user_dma.c: Use frag list abstraction interfaces.David S. Miller1-24/+22
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09net/core/skbuff.c: Use frag list abstraction interfaces.David S. Miller1-124/+106
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09net/core/dev.c: Use frag list abstraction interfaces.David S. Miller1-2/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09datagram: Use frag list abstraction interfaces.David S. Miller1-95/+83
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09appletalk: Use frag list abstraction interfaces.David S. Miller1-17/+14
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09netdevice.h: Use frag list abstraction interfaces.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09skbuff: Add frag list abstraction interfaces.David S. Miller1-1/+20
With the hope that these can be used to eliminate direct references to the frag list implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08bluetooth: Kill skb_frags_no(), unused.David S. Miller1-9/+0
Furthermore, it twiddles with the details of SKB list handling directly, which we're trying to eliminate. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08declance: Restore tx descriptor ring lockingMaciej W. Rozycki1-0/+5
A driver overhaul on 29 Feb 2000 (!) broke locking around fiddling with the tx descriptor ring in start_xmit(); a follow-on "fix" removed the broken remnants altogether. Here's a patch to restore proper locking in the function -- the complement in the interrupt handler has been correct all the time. This *may* have been the reason for the occasional confusion of the chip -- triggering a tx timeout followed by a chip reset sequence -- seen on R4k-based DECstations with the onboard Ethernet interface. Another theory is the confusion is due to an unindentified problem -- perhaps a silicon erratum -- associated with the variation of the MT ASIC used to interface the R4k CPU to the rest of the system on these computers; with its aggressive write-back buffering the design is particularly weakly ordered when it comes to MMIO (in the absence of ordering barriers uncached reads are allowed to bypass earlier uncached writes, even if to the same location), which may trigger all kinds of corner cases in peripheral hardware as well as software. Either way this piece of code is buggy. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08isdn: extend INTERFACE.CAPI documentTilman Schmidt1-2/+88
Clarify calling context and return codes of callback methods, and add a description of the _cmsg structure and helper functions. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08isdn: prevent NULL ptr Oops in capi_cmsg2str()Tilman Schmidt1-0/+2
The dereferencing of the private pointer cmsg->m in capi_cmsg2str() may cause an Oops in case of an error, which is particularly inconvenient as that function is typically used to format an error message. Add a NULL pointer check to avoid this. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08isdn: kerneldoc for capiutil.cTilman Schmidt1-3/+62
Add kerneldoc comments for the exported funtions in capiutil.c. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08isdn: rename capi_ctr_reseted() to capi_ctr_down()Tilman Schmidt9-15/+15
Change the name of the Kernel CAPI exported function capi_ctr_reseted() to something representing its purpose better. Impact: renaming, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08tun: Fix unregister raceEric W. Biederman1-3/+4
It is possible for tun_chr_close to race with dellink on the a tun device. In which case if __tun_get runs before dellink but dellink runs before tun_chr_close calls unregister_netdevice we will attempt to unregister the netdevice after it is already gone. The two cases are already serialized on the rtnl_lock, so I have gone for the cheap simple fix of moving rtnl_lock to cover __tun_get in tun_chr_close. Eliminating the possibility of the tun device being unregistered between __tun_get and unregister_netdevice in tun_chr_close. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Tested-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08e100: Fix napi_enable BUG_ON when recovering from EEH errorAndre Detsch1-5/+6
BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)) was being hit during e100 EEH recovery. The problem source was a napi_enable call being made during e100_io_error_detected. Napi should remain disabled after e100_down, and only be reenabled when the interface is recovered. This patch also updates e100_io_error_detected in order to make it similar to the current versions of the error_detected callback in drivers such as e1000e and ixgbe. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 23:14:12 +0000