diff options
Diffstat (limited to 'drivers/net/gianfar.c')
| -rw-r--r-- | drivers/net/gianfar.c | 152 |
1 files changed, 115 insertions, 37 deletions
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index efd4c70753db..a1b6301bc674 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -85,6 +85,7 @@ #include <linux/net_tstamp.h> #include <asm/io.h> +#include <asm/reg.h> #include <asm/irq.h> #include <asm/uaccess.h> #include <linux/module.h> @@ -685,8 +686,8 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev) priv->rx_queue[i] = NULL; for (i = 0; i < priv->num_tx_queues; i++) { - priv->tx_queue[i] = (struct gfar_priv_tx_q *)kzalloc( - sizeof (struct gfar_priv_tx_q), GFP_KERNEL); + priv->tx_queue[i] = kzalloc(sizeof(struct gfar_priv_tx_q), + GFP_KERNEL); if (!priv->tx_queue[i]) { err = -ENOMEM; goto tx_alloc_failed; @@ -698,8 +699,8 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev) } for (i = 0; i < priv->num_rx_queues; i++) { - priv->rx_queue[i] = (struct gfar_priv_rx_q *)kzalloc( - sizeof (struct gfar_priv_rx_q), GFP_KERNEL); + priv->rx_queue[i] = kzalloc(sizeof(struct gfar_priv_rx_q), + GFP_KERNEL); if (!priv->rx_queue[i]) { err = -ENOMEM; goto rx_alloc_failed; @@ -846,7 +847,7 @@ static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) if (!priv->phydev) return -ENODEV; - return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); + return phy_mii_ioctl(priv->phydev, rq, cmd); } static unsigned int reverse_bitmap(unsigned int bit_map, unsigned int max_qs) @@ -928,6 +929,34 @@ static void gfar_init_filer_table(struct gfar_private *priv) } } +static void gfar_detect_errata(struct gfar_private *priv) +{ + struct device *dev = &priv->ofdev->dev; + unsigned int pvr = mfspr(SPRN_PVR); + unsigned int svr = mfspr(SPRN_SVR); + unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */ + unsigned int rev = svr & 0xffff; + + /* MPC8313 Rev 2.0 and higher; All MPC837x */ + if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) || + (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) + priv->errata |= GFAR_ERRATA_74; + + /* MPC8313 and MPC837x all rev */ + if ((pvr == 0x80850010 && mod == 0x80b0) || + (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) + priv->errata |= GFAR_ERRATA_76; + + /* MPC8313 and MPC837x all rev */ + if ((pvr == 0x80850010 && mod == 0x80b0) || + (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) + priv->errata |= GFAR_ERRATA_A002; + + if (priv->errata) + dev_info(dev, "enabled errata workarounds, flags: 0x%x\n", + priv->errata); +} + /* Set up the ethernet device structure, private data, * and anything else we need before we start */ static int gfar_probe(struct of_device *ofdev, @@ -960,6 +989,8 @@ static int gfar_probe(struct of_device *ofdev, dev_set_drvdata(&ofdev->dev, priv); regs = priv->gfargrp[0].regs; + gfar_detect_errata(priv); + /* Stop the DMA engine now, in case it was running before */ /* (The firmware could have used it, and left it running). */ gfar_halt(dev); @@ -974,7 +1005,10 @@ static int gfar_probe(struct of_device *ofdev, gfar_write(®s->maccfg1, tempval); /* Initialize MACCFG2. */ - gfar_write(®s->maccfg2, MACCFG2_INIT_SETTINGS); + tempval = MACCFG2_INIT_SETTINGS; + if (gfar_has_errata(priv, GFAR_ERRATA_74)) + tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK; + gfar_write(®s->maccfg2, tempval); /* Initialize ECNTRL */ gfar_write(®s->ecntrl, ECNTRL_INIT_SETTINGS); @@ -1541,6 +1575,29 @@ static void init_registers(struct net_device *dev) gfar_write(®s->minflr, MINFLR_INIT_SETTINGS); } +static int __gfar_is_rx_idle(struct gfar_private *priv) +{ + u32 res; + + /* + * Normaly TSEC should not hang on GRS commands, so we should + * actually wait for IEVENT_GRSC flag. + */ + if (likely(!gfar_has_errata(priv, GFAR_ERRATA_A002))) + return 0; + + /* + * Read the eTSEC register at offset 0xD1C. If bits 7-14 are + * the same as bits 23-30, the eTSEC Rx is assumed to be idle + * and the Rx can be safely reset. + */ + res = gfar_read((void __iomem *)priv->gfargrp[0].regs + 0xd1c); + res &= 0x7f807f80; + if ((res & 0xffff) == (res >> 16)) + return 1; + + return 0; +} /* Halt the receive and transmit queues */ static void gfar_halt_nodisable(struct net_device *dev) @@ -1564,12 +1621,18 @@ static void gfar_halt_nodisable(struct net_device *dev) tempval = gfar_read(®s->dmactrl); if ((tempval & (DMACTRL_GRS | DMACTRL_GTS)) != (DMACTRL_GRS | DMACTRL_GTS)) { + int ret; + tempval |= (DMACTRL_GRS | DMACTRL_GTS); gfar_write(®s->dmactrl, tempval); - spin_event_timeout(((gfar_read(®s->ievent) & - (IEVENT_GRSC | IEVENT_GTSC)) == - (IEVENT_GRSC | IEVENT_GTSC)), -1, 0); + do { + ret = spin_event_timeout(((gfar_read(®s->ievent) & + (IEVENT_GRSC | IEVENT_GTSC)) == + (IEVENT_GRSC | IEVENT_GTSC)), 1000000, 0); + if (!ret && !(gfar_read(®s->ievent) & IEVENT_GRSC)) + ret = __gfar_is_rx_idle(priv); + } while (!ret); } } @@ -1987,6 +2050,20 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int nr_frags, nr_txbds, length; union skb_shared_tx *shtx; + /* + * TOE=1 frames larger than 2500 bytes may see excess delays + * before start of transmission. + */ + if (unlikely(gfar_has_errata(priv, GFAR_ERRATA_76) && + skb->ip_summed == CHECKSUM_PARTIAL && + skb->len > 2500)) { + int ret; + + ret = skb_checksum_help(skb); + if (ret) + return ret; + } + rq = skb->queue_mapping; tx_queue = priv->tx_queue[rq]; txq = netdev_get_tx_queue(dev, rq); @@ -2300,7 +2377,8 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) * to allow huge frames, and to check the length */ tempval = gfar_read(®s->maccfg2); - if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE) + if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE || + gfar_has_errata(priv, GFAR_ERRATA_74)) tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); else tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); @@ -2342,6 +2420,15 @@ static void gfar_timeout(struct net_device *dev) schedule_work(&priv->reset_task); } +static void gfar_align_skb(struct sk_buff *skb) +{ + /* We need the data buffer to be aligned properly. We will reserve + * as many bytes as needed to align the data properly + */ + skb_reserve(skb, RXBUF_ALIGNMENT - + (((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1))); +} + /* Interrupt Handler for Transmit complete */ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) { @@ -2426,9 +2513,10 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) */ if (skb_queue_len(&priv->rx_recycle) < rx_queue->rx_ring_size && skb_recycle_check(skb, priv->rx_buffer_size + - RXBUF_ALIGNMENT)) + RXBUF_ALIGNMENT)) { + gfar_align_skb(skb); __skb_queue_head(&priv->rx_recycle, skb); - else + } else dev_kfree_skb_any(skb); tx_queue->tx_skbuff[skb_dirtytx] = NULL; @@ -2491,29 +2579,28 @@ static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp, gfar_init_rxbdp(rx_queue, bdp, buf); } - -struct sk_buff * gfar_new_skb(struct net_device *dev) +static struct sk_buff * gfar_alloc_skb(struct net_device *dev) { - unsigned int alignamount; struct gfar_private *priv = netdev_priv(dev); struct sk_buff *skb = NULL; - skb = __skb_dequeue(&priv->rx_recycle); - if (!skb) - skb = netdev_alloc_skb(dev, - priv->rx_buffer_size + RXBUF_ALIGNMENT); - + skb = netdev_alloc_skb(dev, priv->rx_buffer_size + RXBUF_ALIGNMENT); if (!skb) return NULL; - alignamount = RXBUF_ALIGNMENT - - (((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1)); + gfar_align_skb(skb); - /* We need the data buffer to be aligned properly. We will reserve - * as many bytes as needed to align the data properly - */ - skb_reserve(skb, alignamount); - GFAR_CB(skb)->alignamount = alignamount; + return skb; +} + +struct sk_buff * gfar_new_skb(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + struct sk_buff *skb = NULL; + + skb = __skb_dequeue(&priv->rx_recycle); + if (!skb) + skb = gfar_alloc_skb(dev); return skb; } @@ -2666,17 +2753,8 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - else if (skb) { - /* - * We need to un-reserve() the skb to what it - * was before gfar_new_skb() re-aligned - * it to an RXBUF_ALIGNMENT boundary - * before we put the skb back on the - * recycle list. - */ - skb_reserve(skb, -GFAR_CB(skb)->alignamount); + else if (skb) __skb_queue_head(&priv->rx_recycle, skb); - } } else { /* Increment the number of packets */ rx_queue->stats.rx_packets++; |