diff options
Diffstat (limited to 'arch')
41 files changed, 588 insertions, 466 deletions
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 1d8248ea5669..bd18bb8b2770 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -878,7 +878,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd, void *v) { - if (cmd == CPU_PM_EXIT) { + if (cmd == CPU_PM_EXIT && + __hyp_get_vectors() == hyp_default_vectors) { cpu_init_hyp_mode(NULL); return NOTIFY_OK; } diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index ddc15539bad2..0d68d4073068 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -220,6 +220,10 @@ after_vfp_restore: * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are * passed in r0 and r1. * + * A function pointer with a value of 0xffffffff has a special meaning, + * and is used to implement __hyp_get_vectors in the same way as in + * arch/arm/kernel/hyp_stub.S. + * * The calling convention follows the standard AAPCS: * r0 - r3: caller save * r12: caller save @@ -363,6 +367,11 @@ hyp_hvc: host_switch_to_hyp: pop {r0, r1, r2} + /* Check for __hyp_get_vectors */ + cmp r0, #-1 + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR + beq 1f + push {lr} mrs lr, SPSR push {lr} @@ -378,7 +387,7 @@ THUMB( orr lr, #1) pop {lr} msr SPSR_csxf, lr pop {lr} - eret +1: eret guest_trap: load_vcpu @ Load VCPU pointer to r0 diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h index 13fb0b3efc5f..453a179469a3 100644 --- a/arch/arm64/include/asm/percpu.h +++ b/arch/arm64/include/asm/percpu.h @@ -16,6 +16,8 @@ #ifndef __ASM_PERCPU_H #define __ASM_PERCPU_H +#ifdef CONFIG_SMP + static inline void set_my_cpu_offset(unsigned long off) { asm volatile("msr tpidr_el1, %0" :: "r" (off) : "memory"); @@ -36,6 +38,12 @@ static inline unsigned long __my_cpu_offset(void) } #define __my_cpu_offset __my_cpu_offset() +#else /* !CONFIG_SMP */ + +#define set_my_cpu_offset(x) do { } while (0) + +#endif /* CONFIG_SMP */ + #include <asm-generic/percpu.h> #endif /* __ASM_PERCPU_H */ diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index b524dcd17243..aa3917c8b623 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -136,11 +136,11 @@ extern struct page *empty_zero_page; /* * The following only work if pte_present(). Undefined behaviour otherwise. */ -#define pte_present(pte) (pte_val(pte) & (PTE_VALID | PTE_PROT_NONE)) -#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & PTE_AF) -#define pte_special(pte) (pte_val(pte) & PTE_SPECIAL) -#define pte_write(pte) (pte_val(pte) & PTE_WRITE) +#define pte_present(pte) (!!(pte_val(pte) & (PTE_VALID | PTE_PROT_NONE))) +#define pte_dirty(pte) (!!(pte_val(pte) & PTE_DIRTY)) +#define pte_young(pte) (!!(pte_val(pte) & PTE_AF)) +#define pte_special(pte) (!!(pte_val(pte) & PTE_SPECIAL)) +#define pte_write(pte) (!!(pte_val(pte) & PTE_WRITE)) #define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) #define pte_valid_user(pte) \ diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index c3b6c63ea5fb..38f0558f0c0a 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -48,7 +48,11 @@ int unwind_frame(struct stackframe *frame) frame->sp = fp + 0x10; frame->fp = *(unsigned long *)(fp); - frame->pc = *(unsigned long *)(fp + 8); + /* + * -4 here because we care about the PC at time of bl, + * not where the return will go. + */ + frame->pc = *(unsigned long *)(fp + 8) - 4; return 0; } diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S index 3b47c36e10ff..2c56012cb2d2 100644 --- a/arch/arm64/kvm/hyp.S +++ b/arch/arm64/kvm/hyp.S @@ -694,6 +694,24 @@ __hyp_panic_str: .align 2 +/* + * u64 kvm_call_hyp(void *hypfn, ...); + * + * This is not really a variadic function in the classic C-way and care must + * be taken when calling this to ensure parameters are passed in registers + * only, since the stack will change between the caller and the callee. + * + * Call the function with the first argument containing a pointer to the + * function you wish to call in Hyp mode, and subsequent arguments will be + * passed as x0, x1, and x2 (a maximum of 3 arguments in addition to the + * function pointer can be passed). The function being called must be mapped + * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are + * passed in r0 and r1. + * + * A function pointer with a value of 0 has a special meaning, and is + * used to implement __hyp_get_vectors in the same way as in + * arch/arm64/kernel/hyp_stub.S. + */ ENTRY(kvm_call_hyp) hvc #0 ret @@ -737,7 +755,12 @@ el1_sync: // Guest trapped into EL2 pop x2, x3 pop x0, x1 - push lr, xzr + /* Check for __hyp_get_vectors */ + cbnz x0, 1f + mrs x0, vbar_el2 + b 2f + +1: push lr, xzr /* * Compute the function address in EL2, and shuffle the parameters. @@ -750,7 +773,7 @@ el1_sync: // Guest trapped into EL2 blr lr pop lr, xzr - eret +2: eret el1_trap: /* diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 7cc8c364924d..6fb9e813a910 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,4 +1,4 @@ - +generic-y += barrier.h generic-y += bitsperlong.h generic-y += clkdev.h generic-y += cputime.h @@ -6,6 +6,7 @@ generic-y += device.h generic-y += emergency-restart.h generic-y += errno.h generic-y += exec.h +generic-y += hash.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ipcbuf.h @@ -18,6 +19,7 @@ generic-y += local.h generic-y += mman.h generic-y += mutex.h generic-y += percpu.h +generic-y += preempt.h generic-y += resource.h generic-y += scatterlist.h generic-y += sections.h @@ -31,5 +33,3 @@ generic-y += trace_clock.h generic-y += types.h generic-y += word-at-a-time.h generic-y += xor.h -generic-y += preempt.h -generic-y += hash.h diff --git a/arch/m68k/include/asm/barrier.h b/arch/m68k/include/asm/barrier.h deleted file mode 100644 index 15c5f77c1614..000000000000 --- a/arch/m68k/include/asm/barrier.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _M68K_BARRIER_H -#define _M68K_BARRIER_H - -#define nop() do { asm volatile ("nop"); barrier(); } while (0) - -#include <asm-generic/barrier.h> - -#endif /* _M68K_BARRIER_H */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 014f288fc813..9d38b73989eb 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -4,7 +4,7 @@ #include <uapi/asm/unistd.h> -#define NR_syscalls 349 +#define NR_syscalls 351 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h index 625f321001dc..b932dd470041 100644 --- a/arch/m68k/include/uapi/asm/unistd.h +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -354,5 +354,7 @@ #define __NR_process_vm_writev 346 #define __NR_kcmp 347 #define __NR_finit_module 348 +#define __NR_sched_setattr 349 +#define __NR_sched_getattr 350 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 3f04ea0ab802..b6223dc41d82 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -369,4 +369,6 @@ ENTRY(sys_call_table) .long sys_process_vm_writev .long sys_kcmp .long sys_finit_module + .long sys_sched_setattr + .long sys_sched_getattr /* 350 */ diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index 84fdf6857c31..a613d2c82fd9 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -200,10 +200,11 @@ static inline void __user *arch_compat_alloc_user_space(long len) /* * We can't access below the stack pointer in the 32bit ABI and - * can access 288 bytes in the 64bit ABI + * can access 288 bytes in the 64bit big-endian ABI, + * or 512 bytes with the new ELFv2 little-endian ABI. */ if (!is_32bit_task()) - usp -= 288; + usp -= USER_REDZONE_SIZE; return (void __user *) (usp - len); } diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 40157e2ca691..ed82142a3251 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -816,8 +816,8 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe, int64_t opal_pci_poll(uint64_t phb_id); int64_t opal_return_cpu(void); -int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, __be64 *val); -int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val); +int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val); +int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val); int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, uint32_t addr, uint32_t data, uint32_t sz); diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index becc08e6a65c..279b80f3bb29 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -28,11 +28,23 @@ #ifdef __powerpc64__ +/* + * Size of redzone that userspace is allowed to use below the stack + * pointer. This is 288 in the 64-bit big-endian ELF ABI, and 512 in + * the new ELFv2 little-endian ABI, so we allow the larger amount. + * + * For kernel code we allow a 288-byte redzone, in order to conserve + * kernel stack space; gcc currently only uses 288 bytes, and will + * hopefully allow explicit control of the redzone size in future. + */ +#define USER_REDZONE_SIZE 512 +#define KERNEL_REDZONE_SIZE 288 + #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ #define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ #define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) #define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ - STACK_FRAME_OVERHEAD + 288) + STACK_FRAME_OVERHEAD + KERNEL_REDZONE_SIZE) #define STACK_FRAME_MARKER 12 /* Size of dummy stack frame allocated when calling signal handler. */ @@ -41,6 +53,8 @@ #else /* __powerpc64__ */ +#define USER_REDZONE_SIZE 0 +#define KERNEL_REDZONE_SIZE 0 #define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ #define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ #define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 11c1d069d920..7a13f378ca2c 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -98,17 +98,19 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, unsigned long offset, int userbuf) { void *vaddr; + phys_addr_t paddr; if (!csize) return 0; csize = min_t(size_t, csize, PAGE_SIZE); + paddr = pfn << PAGE_SHIFT; - if ((min_low_pfn < pfn) && (pfn < max_pfn)) { - vaddr = __va(pfn << PAGE_SHIFT); + if (memblock_is_region_memory(paddr, csize)) { + vaddr = __va(paddr); csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); } else { - vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0); + vaddr = __ioremap(paddr, PAGE_SIZE, 0); csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); iounmap(vaddr); } diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 9b27b293a922..b0ded97ee4e1 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -74,6 +74,7 @@ ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new) */ static int test_24bit_addr(unsigned long ip, unsigned long addr) { + addr = ppc_function_entry((void *)addr); /* use the create_branch to verify that this offset can be branched */ return create_branch((unsigned int *)ip, addr, 0); diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index e35bf773df7a..8d253c29649b 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -65,8 +65,8 @@ struct rt_sigframe { struct siginfo __user *pinfo; void __user *puc; struct siginfo info; - /* 64 bit ABI allows for 288 bytes below sp before decrementing it. */ - char abigap[288]; + /* New 64 bit little-endian ABI allows redzone of 512 bytes below sp */ + char abigap[USER_REDZONE_SIZE]; } __attribute__ ((aligned (16))); static const char fmt32[] = KERN_INFO \ diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index f51474336460..253fefe3d1a0 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -114,6 +114,7 @@ DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get, ioda_eeh_inbB_dbgfs_set, "0x%llx\n"); #endif /* CONFIG_DEBUG_FS */ + /** * ioda_eeh_post_init - Chip dependent post initialization * @hose: PCI controller @@ -221,6 +222,22 @@ static int ioda_eeh_set_option(struct eeh_pe *pe, int option) return ret; } +static void ioda_eeh_phb_diag(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + long rc; + + rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, + PNV_PCI_DIAG_BUF_SIZE); + if (rc != OPAL_SUCCESS) { + pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", + __func__, hose->global_number, rc); + return; + } + + pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); +} + /** * ioda_eeh_get_state - Retrieve the state of PE * @pe: EEH PE @@ -272,6 +289,9 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) result |= EEH_STATE_DMA_ACTIVE; result |= EEH_STATE_MMIO_ENABLED; result |= EEH_STATE_DMA_ENABLED; + } else if (!(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); } return result; @@ -315,6 +335,15 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) __func__, fstate, hose->global_number, pe_no); } + /* Dump PHB diag-data for frozen PE */ + if (result != EEH_STATE_NOT_SUPPORT && + (result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) != + (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) && + !(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); + } + return result; } @@ -530,42 +559,6 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) } /** - * ioda_eeh_get_log - Retrieve error log - * @pe: EEH PE - * @severity: Severity level of the log - * @drv_log: buffer to store the log - * @len: space of the log buffer - * - * The function is used to retrieve error log from P7IOC. - */ -static int ioda_eeh_get_log(struct eeh_pe *pe, int severity, - char *drv_log, unsigned long len) -{ - s64 ret; - unsigned long flags; - struct pci_controller *hose = pe->phb; - struct pnv_phb *phb = hose->private_data; - - spin_lock_irqsave(&phb->lock, flags); - - ret = opal_pci_get_phb_diag_data2(phb->opal_id, - phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE); - if (ret) { - spin_unlock_irqrestore(&phb->lock, flags); - pr_warning("%s: Can't get log for PHB#%x-PE#%x (%lld)\n", - __func__, hose->global_number, pe->addr, ret); - return -EIO; - } - - /* The PHB diag-data is always indicative */ - pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); - - spin_unlock_irqrestore(&phb->lock, flags); - - return 0; -} - -/** * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE * @pe: EEH PE * @@ -646,22 +639,6 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose) } } -static void ioda_eeh_phb_diag(struct pci_controller *hose) -{ - struct pnv_phb *phb = hose->private_data; - long rc; - - rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, - PNV_PCI_DIAG_BUF_SIZE); - if (rc != OPAL_SUCCESS) { - pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", - __func__, hose->global_number, rc); - return; - } - - pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); -} - static int ioda_eeh_get_phb_pe(struct pci_controller *hose, struct eeh_pe **pe) { @@ -835,6 +812,20 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) } /* + * EEH core will try recover from fenced PHB or + * frozen PE. In the time for frozen PE, EEH core + * enable IO path for that before collecting logs, + * but it ruins the site. So we have to dump the + * log in advance here. + */ + if ((ret == EEH_NEXT_ERR_FROZEN_PE || + ret == EEH_NEXT_ERR_FENCED_PHB) && + !((*pe)->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(*pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); + } + + /* * If we have no errors on the specific PHB or only * informative error there, we continue poking it. * Otherwise, we need actions to be taken by upper @@ -852,7 +843,6 @@ struct pnv_eeh_ops ioda_eeh_ops = { .set_option = ioda_eeh_set_option, .get_state = ioda_eeh_get_state, .reset = ioda_eeh_reset, - .get_log = ioda_eeh_get_log, .configure_bridge = ioda_eeh_configure_bridge, .next_error = ioda_eeh_next_error }; diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c index 4fbf276ac99e..4cd2ea6c0dbe 100644 --- a/arch/powerpc/platforms/powernv/opal-xscom.c +++ b/arch/powerpc/platforms/powernv/opal-xscom.c @@ -71,11 +71,11 @@ static int opal_xscom_err_xlate(int64_t rc) } } -static u64 opal_scom_unmangle(u64 reg) +static u64 opal_scom_unmangle(u64 addr) { /* * XSCOM indirect addresses have the top bit set. Additionally - * the reset of the top 3 nibbles is always 0. + * the rest of the top 3 nibbles is always 0. * * Because the debugfs interface uses signed offsets and shifts * the address left by 3, we basically cannot use the top 4 bits @@ -86,10 +86,13 @@ static u64 opal_scom_unmangle(u64 reg) * conversion here. To leave room for further xscom address * expansion, we only clear out the top byte * + * For in-kernel use, we also support the real indirect bit, so + * we test for any of the top 5 bits + * */ - if (reg & (1ull << 59)) - reg = (reg & ~(0xffull << 56)) | (1ull << 63); - return reg; + if (addr & (0x1full << 59)) + addr = (addr & ~(0xffull << 56)) | (1ull << 63); + return addr; } static int opal_scom_read(scom_map_t map, u64 reg, u64 *value) @@ -98,8 +101,8 @@ static int opal_scom_read(scom_map_t map, u64 reg, u64 *value) int64_t rc; __be64 v; - reg = opal_scom_unmangle(reg); - rc = opal_xscom_read(m->chip, m->addr + reg, (__be64 *)__pa(&v)); + reg = opal_scom_unmangle(m->addr + reg); + rc = opal_xscom_read(m->chip, reg, (__be64 *)__pa(&v)); *value = be64_to_cpu(v); return opal_xscom_err_xlate(rc); } @@ -109,8 +112,8 @@ static int opal_scom_write(scom_map_t map, u64 reg, u64 value) struct opal_scom_map *m = map; int64_t rc; - reg = opal_scom_unmangle(reg); - rc = opal_xscom_write(m->chip, m->addr + reg, value); + reg = opal_scom_unmangle(m->addr + reg); + rc = opal_xscom_write(m->chip, reg, value); return opal_xscom_err_xlate(rc); } diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 95633d79ef5d..8518817dcdfd 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -134,57 +134,72 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose, pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n\n", hose->global_number, common->version); - pr_info(" brdgCtl: %08x\n", data->brdgCtl); - - pr_info(" portStatusReg: %08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); - - pr_info(" deviceStatus: %08x\n", data->deviceStatus); - pr_info(" slotStatus: %08x\n", data->slotStatus); - pr_info(" linkStatus: %08x\n", data->linkStatus); - pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); - pr_info(" devSecStatus: %08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); - pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); - pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); - pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); - pr_info(" sourceId: %08x\n", data->sourceId); - pr_info(" errorClass: %016llx\n", data->errorClass); - pr_info(" correlator: %016llx\n", data->correlator); - pr_info(" p7iocPlssr: %016llx\n", data->p7iocPlssr); - pr_info(" p7iocCsr: %016llx\n", data->p7iocCsr); - pr_info(" lemFir: %016llx\n", data->lemFir); - pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); - pr_info(" lemWOF: %016llx\n", data->lemWOF); - pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); + if (data->brdgCtl) + pr_info(" brdgCtl: %08x\n", + data->brdgCtl); + if (data->portStatusReg || data->rootCmplxStatus || + data->busAgentStatus) + pr_info(" UtlSts: %08x %08x %08x\n", + data->portStatusReg, data->rootCmplxStatus, + data->busAgentStatus); + if (data->deviceStatus || data->slotStatus || + data->linkStatus || data->devCmdStatus || + data->devSecStatus) + pr_info(" RootSts: %08x %08x %08x %08x %08x\n", + data->deviceStatus, data->slotStatus, + data->linkStatus, data->devCmdStatus, + data->devSecStatus); + if (data->rootErrorStatus || data->uncorrErrorStatus || + data->corrErrorStatus) + pr_info(" RootErrSts: %08x %08x %08x\n", + data->rootErrorStatus, data->uncorrErrorStatus, + data->corrErrorStatus); + if (data->tlpHdr1 || data->tlpHdr2 || + data->tlpHdr3 || data->tlpHdr4) + pr_info(" RootErrLog: %08x %08x %08x %08x\n", + data->tlpHdr1, data->tlpHdr2, + data->tlpHdr3, data->tlpHdr4); + if (data->sourceId || data->errorClass || + data->correlator) + pr_info(" RootErrLog1: %08x %016llx %016llx\n", + data->sourceId, data->errorClass, + data->correlator); + if (data->p7iocPlssr || data->p7iocCsr) + pr_info(" PhbSts: %016llx %016llx\n", + data->p7iocPlssr, data->p7iocCsr); + if (data->lemFir || data->lemErrorMask || + data->lemWOF) + pr_info(" Lem: %016llx %016llx %016llx\n", + data->lemFir, data->lemErrorMask, + data->lemWOF); + if (data->phbErrorStatus || data->phbFirstErrorStatus || + data->phbErrorLog0 || data->phbErrorLog1) + pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n", + data->phbErrorStatus, data->phbFirstErrorStatus, + data->phbErrorLog0, data->phbErrorLog1); + if (data->mmioErrorStatus || data->mmioFirstErrorStatus || + data->mmioErrorLog0 || data->mmioErrorLog1) + pr_info(" OutErr: %016llx %016llx %016llx %016llx\n", + data->mmioErrorStatus, data->mmioFirstErrorStatus, + data->mmioErrorLog0, data->mmioErrorLog1); + if (data->dma0ErrorStatus || data->dma0FirstErrorStatus || + data->dma0ErrorLog0 || data->dma0ErrorLog1) + pr_info(" InAErr: %016llx %016llx %016llx %016llx\n", + data->dma0ErrorStatus, data->dma0FirstErrorStatus, + data->dma0ErrorLog0, data->dma0ErrorLog1); + if (data->dma1ErrorStatus || data->dma1FirstErrorStatus || + data->dma1ErrorLog0 || data->dma1ErrorLog1) + pr_info(" InBErr: %016llx %016llx %016llx %016llx\n", + data->dma1ErrorStatus, data->dma1FirstErrorStatus, + data->dma1ErrorLog0, data->dma1ErrorLog1); for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { if ((data->pestA[i] >> 63) == 0 && (data->pestB[i] >> 63) == 0) continue; - pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); - pr_info(" PESTB: %016llx\n", data->pestB[i]); + pr_info(" PE[%3d] A/B: %016llx %016llx\n", + i, data->pestA[i], data->pestB[i]); } } @@ -197,62 +212,77 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose, data = (struct OpalIoPhb3ErrorData*)common; pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n\n", hose->global_number, common->version); - - pr_info(" brdgCtl: %08x\n", data->brdgCtl); - - pr_info(" portStatusReg: %08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); - - pr_info(" deviceStatus: %08x\n", data->deviceStatus); - pr_info(" slotStatus: %08x\n", data->slotStatus); - pr_info(" linkStatus: %08x\n", data->linkStatus); - pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); - pr_info(" devSecStatus: %08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); - pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); - pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); - pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); - pr_info(" sourceId: %08x\n", data->sourceId); - pr_info(" errorClass: %016llx\n", data->errorClass); - pr_info(" correlator: %016llx\n", data->correlator); - - pr_info(" nFir: %016llx\n", data->nFir); - pr_info(" nFirMask: %016llx\n", data->nFirMask); - pr_info(" nFirWOF: %016llx\n", data->nFirWOF); - pr_info(" PhbPlssr: %016llx\n", data->phbPlssr); - pr_info(" PhbCsr: %016llx\n", data->phbCsr); - pr_info(" lemFir: %016llx\n", data->lemFir); - pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); - pr_info(" lemWOF: %016llx\n", data->lemWOF); - pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); + if (data->brdgCtl) + pr_info(" brdgCtl: %08x\n", + data->brdgCtl); + if (data->portStatusReg || data->rootCmplxStatus || + data->busAgentStatus) + pr_info(" UtlSts: %08x %08x %08x\n", + data->portStatusReg, data->rootCmplxStatus, + data->busAgentStatus); + if (data->deviceStatus || data->slotStatus || + data->linkStatus || data->devCmdStatus || + data->devSecStatus) + pr_info(" RootSts: %08x %08x %08x %08x %08x\n", + data->deviceStatus, data->slotStatus, + data->linkStatus, data->devCmdStatus, + data->devSecStatus); + if (data->rootErrorStatus || data->uncorrErrorStatus || + data->corrErrorStatus) + pr_info(" RootErrSts: %08x %08x %08x\n", + data->rootErrorStatus, data->uncorrErrorStatus, + data->corrErrorStatus); + if (data->tlpHdr1 || data->tlpHdr2 || + data->tlpHdr3 || data->tlpHdr4) + pr_info(" RootErrLog: %08x %08x %08x %08x\n", + data->tlpHdr1, data->tlpHdr2, + data->tlpHdr3, data->tlpHdr4); + if (data->sourceId || data->errorClass || + data->correlator) + pr_info(" RootErrLog1: %08x %016llx %016llx\n", + data->sourceId, data->errorClass, + data->correlator); + if (data->nFir || data->nFirMask || + data->nFirWOF) + pr_info(" nFir: %016llx %016llx %016llx\n", + data->nFir, data->nFirMask, + data->nFirWOF); + if (data->phbPlssr || data->phbCsr) + pr_info(" PhbSts: %016llx %016llx\n", + data->phbPlssr, data->phbCsr); + if (data->lemFir || data->lemErrorMask || + data->lemWOF) + pr_info(" Lem: %016llx %016llx %016llx\n", + data->lemFir, data->lemErrorMask, + data->lemWOF); + if (data->phbErrorStatus || data->phbFirstErrorStatus || + data->phbErrorLog0 || data->phbErrorLog1) + pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n", + data->phbErrorStatus, data->phbFirstErrorStatus, + data->phbErrorLog0, data->phbErrorLog1); + if (data->mmioErrorStatus || data->mmioFirstErrorStatus || + data->mmioErrorLog0 || data->mmioErrorLog1) + pr_info(" OutErr: %016llx %016llx %016llx %016llx\n", + data->mmioErrorStatus, data->mmioFirstErrorStatus, + data->mmioErrorLog0, data->mmioErrorLog1); + if (data->dma0ErrorStatus || data->dma0FirstErrorStatus || + data->dma0ErrorLog0 || data->dma0ErrorLog1) + pr_info(" InAErr: %016llx %016llx %016llx %016llx\n", + data->dma0ErrorStatus, data->dma0FirstErrorStatus, + data->dma0ErrorLog0, data->dma0ErrorLog1); + if (data->dma1ErrorStatus || data->dma1FirstErrorStatus || + data->dma1ErrorLog0 || data->dma1ErrorLog1) + pr_info(" InBErr: %016llx %016llx %016llx %016llx\n", + data->dma1ErrorStatus, data->dma1FirstErrorStatus, + data->dma1ErrorLog0, data->dma1ErrorLog1); for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) { if ((data->pestA[i] >> 63) == 0 && (data->pestB[i] >> 63) == 0) continue; - pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); - pr_info(" PESTB: %016llx\n", data->pestB[i]); + pr_info(" PE[%3d] A/B: %016llx %016llx\n", + i, data->pestA[i], data->pestB[i]); } } diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 82789e79e539..0ea99e3d4815 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -35,12 +35,7 @@ #include "offline_states.h" /* This version can't take the spinlock, because it never returns */ -static struct rtas_args rtas_stop_self_args = { - .token = RTAS_UNKNOWN_SERVICE, - .nargs = 0, - .nret = 1, - .rets = &rtas_stop_self_args.args[0], -}; +static int rtas_stop_self_token = RTAS_UNKNOWN_SERVICE; static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) = CPU_STATE_OFFLINE; @@ -93,15 +88,20 @@ void set_default_offline_state(int cpu) static void rtas_stop_self(void) { - struct rtas_args *args = &rtas_stop_self_args; + struct rtas_args args = { + .token = cpu_to_be32(rtas_stop_self_token), + .nargs = 0, + .nret = 1, + .rets = &args.args[0], + }; local_irq_disable(); - BUG_ON(args->token == RTAS_UNKNOWN_SERVICE); + BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE); printk("cpu %u (hwid %u) Ready to die...\n", smp_processor_id(), hard_smp_processor_id()); - enter_rtas(__pa(args)); + enter_rtas(__pa(&args)); panic("Alas, I survived.\n"); } @@ -392,10 +392,10 @@ static int __init pseries_cpu_hotplug_init(void) } } - rtas_stop_self_args.token = rtas_token("stop-self"); + rtas_stop_self_token = rtas_token("stop-self"); qcss_tok = rtas_token("query-cpu-stopped-state"); - if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE || + if (rtas_stop_self_token == RTAS_UNKNOWN_SERVICE || qcss_tok == RTAS_UNKNOWN_SERVICE) { printk(KERN_INFO "CPU Hotplug not supported by firmware " "- disabling.\n"); diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 59c8efce1b99..0248949a756d 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1421,5 +1421,5 @@ ENTRY(sys_sched_setattr_wrapper) ENTRY(sys_sched_getattr_wrapper) lgfr %r2,%r2 # pid_t llgtr %r3,%r3 # const char __user * - llgfr %r3,%r3 # unsigned int + llgfr %r4,%r4 # unsigned int jg sys_sched_getattr diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index 60c11a629d96..f91c03119804 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -206,11 +206,13 @@ static void dma_cleanup_tables(struct zpci_dev *zdev) zdev->dma_table = NULL; } -static unsigned long __dma_alloc_iommu(struct zpci_dev *zdev, unsigned long start, - int size) +static unsigned long __dma_alloc_iommu(struct zpci_dev *zdev, + unsigned long start, int size) { - unsigned long boundary_size = 0x1000000; + unsigned long boundary_size; + boundary_size = ALIGN(dma_get_seg_boundary(&zdev->pdev->dev) + 1, + PAGE_SIZE) >> PAGE_SHIFT; return iommu_area_alloc(zdev->iommu_bitmap, zdev->iommu_pages, start, size, 0, boundary_size, 0); } diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index e50425d0f5f7..9b531351a587 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -2672,6 +2672,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write, break; } + drop_large_spte(vcpu, iterator.sptep); if (!is_shadow_present_pte(*iterator.sptep)) { u64 base_addr = iterator.addr; diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index a06f101ef64b..392752834751 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6688,7 +6688,7 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu) else if (is_page_fault(intr_info)) return enable_ept; else if (is_no_device(intr_info) && - !(nested_read_cr0(vmcs12) & X86_CR0_TS)) + !(vmcs12->guest_cr0 & X86_CR0_TS)) return 0; return vmcs12->exception_bitmap & (1u << (intr_info & INTR_INFO_VECTOR_MASK)); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 39c28f09dfd5..2b8578432d5b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6186,7 +6186,7 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu) frag->len -= len; } - if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) { + if (vcpu->mmio_cur_fragment >= vcpu->mmio_nr_fragments) { vcpu->mmio_needed = 0; /* FIXME: return into emulator if single-stepping. */ diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index ba56e11cbf77..c87ae7c6e5f9 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -20,6 +20,7 @@ config XTENSA select HAVE_FUNCTION_TRACER select HAVE_IRQ_TIME_ACCOUNTING select HAVE_PERF_EVENTS + select COMMON_CLK help Xtensa processors are 32-bit RISC machines designed by Tensilica primarily for embedded systems. These processors are both @@ -80,7 +81,6 @@ choice config XTENSA_VARIANT_FSF bool "fsf - default (not generic) configuration" select MMU - select HAVE_XTENSA_GPIO32 config XTENSA_VARIANT_DC232B bool "dc232b - Diamond 232L Standard Core Rev.B (LE)" @@ -135,7 +135,6 @@ config HAVE_SMP config SMP bool "Enable Symmetric multi-processing support" depends on HAVE_SMP - select USE_GENERIC_SMP_HELPERS select GENERIC_SMP_IDLE_THREAD help Enabled SMP Software; allows more than one CPU/CORE diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi index 46b4f5eab421..e7370b11348e 100644 --- a/arch/xtensa/boot/dts/xtfpga.dtsi +++ b/arch/xtensa/boot/dts/xtfpga.dtsi @@ -35,6 +35,13 @@ interrupt-controller; }; + clocks { + osc: main-oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + }; + serial0: serial@fd050020 { device_type = "serial"; compatible = "ns16550a"; @@ -42,9 +49,7 @@ reg = <0xfd050020 0x20>; reg-shift = <2>; interrupts = <0 1>; /* external irq 0 */ - /* Filled in by platform_setup from FPGA register - * clock-frequency = <100000000>; - */ + clocks = <&osc>; }; enet0: ethoc@fd030000 { @@ -52,5 +57,6 @@ reg = <0xfd030000 0x4000 0xfd800000 0x4000>; interrupts = <1 1>; /* external irq 1 */ local-mac-address = [00 50 c2 13 6f 00]; + clocks = <&osc>; }; }; diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index 2a042d430c25..74944207167e 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -25,7 +25,7 @@ #ifdef CONFIG_MMU -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF +#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) extern unsigned long xtensa_kio_paddr; static inline unsigned long xtensa_get_kio_paddr(void) diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h index 8c194f6af45e..677bfcf4ee5d 100644 --- a/arch/xtensa/include/asm/traps.h +++ b/arch/xtensa/include/asm/traps.h @@ -23,25 +23,37 @@ void secondary_trap_init(void); static inline void spill_registers(void) { - +#if XCHAL_NUM_AREGS > 16 __asm__ __volatile__ ( - "movi a14, "__stringify((1 << PS_EXCM_BIT) | LOCKLEVEL)"\n\t" - "mov a12, a0\n\t" - "rsr a13, sar\n\t" - "xsr a14, ps\n\t" - "movi a0, _spill_registers\n\t" - "rsync\n\t" - "callx0 a0\n\t" - "mov a0, a12\n\t" - "wsr a13, sar\n\t" - "wsr a14, ps\n\t" - : : -#if defined(CONFIG_FRAME_POINTER) - : "a2", "a3", "a4", "a11", "a12", "a13", "a14", "a15", + " call12 1f\n" + " _j 2f\n" + " retw\n" + " .align 4\n" + "1:\n" + " _entry a1, 48\n" + " addi a12, a0, 3\n" +#if XCHAL_NUM_AREGS > 32 + " .rept (" __stringify(XCHAL_NUM_AREGS) " - 32) / 12\n" + " _entry a1, 48\n" + " mov a12, a0\n" + " .endr\n" +#endif + " _entry a1, 48\n" +#if XCHAL_NUM_AREGS % 12 == 0 + " mov a8, a8\n" +#elif XCHAL_NUM_AREGS % 12 == 4 + " mov a12, a12\n" +#elif XCHAL_NUM_AREGS % 12 == 8 + " mov a4, a4\n" +#endif + " retw\n" + "2:\n" + : : : "a12", "a13", "memory"); #else - : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", + __asm__ __volatile__ ( + " mov a12, a12\n" + : : : "memory"); #endif - "memory"); } #endif /* _XTENSA_TRAPS_H */ diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h index 5791b45d5a5d..f74ddfbb92ef 100644 --- a/arch/xtensa/include/asm/vectors.h +++ b/arch/xtensa/include/asm/vectors.h @@ -25,7 +25,7 @@ #define XCHAL_KIO_DEFAULT_PADDR 0xf0000000 #define XCHAL_KIO_SIZE 0x10000000 -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF +#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) #define XCHAL_KIO_PADDR xtensa_get_kio_paddr() #else #define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 51940fec6990..b9395529f02d 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -734,7 +734,12 @@ __SYSCALL(332, sys_finit_module, 3) #define __NR_accept4 333 __SYSCALL(333, sys_accept4, 4) -#define __NR_syscall_count 334 +#define __NR_sched_setattr 334 +__SYSCALL(334, sys_sched_setattr, 2) +#define __NR_sched_getattr 335 +__SYSCALL(335, sys_sched_getattr, 3) + +#define __NR_syscall_count 336 /* * sysxtensa syscall handler diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 21dbe6bdb8ed..ef7f4990722b 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1081,196 +1081,53 @@ ENTRY(fast_syscall_spill_registers) rsr a0, sar s32i a3, a2, PT_AREG3 - s32i a4, a2, PT_AREG4 - s32i a0, a2, PT_AREG5 # store SAR to PT_AREG5 + s32i a0, a2, PT_SAR - /* The spill routine might clobber a7, a11, and a15. */ + /* The spill routine might clobber a4, a7, a8, a11, a12, and a15. */ + s32i a4, a2, PT_AREG4 s32i a7, a2, PT_AREG7 + s32i a8, a2, PT_AREG8 s32i a11, a2, PT_AREG11 + s32i a12, a2, PT_AREG12 s32i a15, a2, PT_AREG15 - call0 _spill_registers # destroys a3, a4, and SAR - - /* Advance PC, restore registers and SAR, and return from exception. */ - - l32i a3, a2, PT_AREG5 - l32i a4, a2, PT_AREG4 - l32i a0, a2, PT_AREG0 - wsr a3, sar - l32i a3, a2, PT_AREG3 - - /* Restore clobbered registers. */ - - l32i a7, a2, PT_AREG7 - l32i a11, a2, PT_AREG11 - l32i a15, a2, PT_AREG15 - - movi a2, 0 - rfe - -ENDPROC(fast_syscall_spill_registers) - -/* Fixup handler. - * - * We get here if the spill routine causes an exception, e.g. tlb miss. - * We basically restore WINDOWBASE and WINDOWSTART to the condition when - * we entered the spill routine and jump to the user exception handler. - * - * a0: value of depc, original value in depc - * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE - * a3: exctable, original value in excsave1 - */ - -ENTRY(fast_syscall_spill_registers_fixup) - - rsr a2, windowbase # get current windowbase (a2 is saved) - xsr a0, depc # restore depc and a0 - ssl a2 # set shift (32 - WB) - - /* We need to make sure the current registers (a0-a3) are preserved. - * To do this, we simply set the bit for the current window frame - * in WS, so that the exception handlers save them to the task stack. - */ - - xsr a3, excsave1 # get spill-mask - slli a3, a3, 1 # shift left by one - - slli a2, a3, 32-WSBITS - src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy...... - wsr a2, windowstart # set corrected windowstart - - srli a3, a3, 1 - rsr a2, excsave1 - l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2 - xsr a2, excsave1 - s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3 - l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task) - xsr a2, excsave1 - - /* Return to the original (user task) WINDOWBASE. - * We leave the following frame behind: - * a0, a1, a2 same - * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE) - * depc: depc (we have to return to that address) - * excsave_1: exctable - */ - - wsr a3, windowbase - rsync - - /* We are now in the original frame when we entered _spill_registers: - * a0: return address - * a1: used, stack pointer - * a2: kernel stack pointer - * a3: available - * depc: exception address - * excsave: exctable - * Note: This frame might be the same as above. - */ - - /* Setup stack pointer. */ - - addi a2, a2, -PT_USER_SIZE - s32i a0, a2, PT_AREG0 - - /* Make sure we return to this fixup handler. */ - - movi a3, fast_syscall_spill_registers_fixup_return - s32i a3, a2, PT_DEPC # setup depc - - /* Jump to the exception handler. */ - - rsr a3, excsave1 - rsr a0, exccause - addx4 a0, a0, a3 # find entry in table - l32i a0, a0, EXC_TABLE_FAST_USER # load handler - l32i a3, a3, EXC_TABLE_DOUBLE_SAVE - jx a0 - -ENDPROC(fast_syscall_spill_registers_fixup) - -ENTRY(fast_syscall_spill_registers_fixup_return) - - /* When we return here, all registers have been restored (a2: DEPC) */ - - wsr a2, depc # exception address - - /* Restore fixup handler. */ - - rsr a2, excsave1 - s32i a3, a2, EXC_TABLE_DOUBLE_SAVE - movi a3, fast_syscall_spill_registers_fixup - s32i a3, a2, EXC_TABLE_FIXUP - rsr a3, windowbase - s32i a3, a2, EXC_TABLE_PARAM - l32i a2, a2, EXC_TABLE_KSTK - - /* Load WB at the time the exception occurred. */ - - rsr a3, sar # WB is still in SAR - neg a3, a3 - wsr a3, windowbase - rsync - - rsr a3, excsave1 - l32i a3, a3, EXC_TABLE_DOUBLE_SAVE - - rfde - -ENDPROC(fast_syscall_spill_registers_fixup_return) - -/* - * spill all registers. - * - * This is not a real function. The following conditions must be met: - * - * - must be called with call0. - * - uses a3, a4 and SAR. - * - the last 'valid' register of each frame are clobbered. - * - the caller must have registered a fixup handler - * (or be inside a critical section) - * - PS_EXCM must be set (PS_WOE cleared?) - */ - -ENTRY(_spill_registers) - /* * Rotate ws so that the current windowbase is at bit 0. * Assume ws = xxxwww1yy (www1 current window frame). * Rotate ws right so that a4 = yyxxxwww1. */ - rsr a4, windowbase + rsr a0, windowbase rsr a3, windowstart # a3 = xxxwww1yy - ssr a4 # holds WB - slli a4, a3, WSBITS - or a3, a3, a4 # a3 = xxxwww1yyxxxwww1yy + ssr a0 # holds WB + slli a0, a3, WSBITS + or a3, a3, a0 # a3 = xxxwww1yyxxxwww1yy srl a3, a3 # a3 = 00xxxwww1yyxxxwww1 /* We are done if there are no more than the current register frame. */ extui a3, a3, 1, WSBITS-1 # a3 = 0yyxxxwww - movi a4, (1 << (WSBITS-1)) + movi a0, (1 << (WSBITS-1)) _beqz a3, .Lnospill # only one active frame? jump /* We want 1 at the top, so that we return to the current windowbase */ - or a3, a3, a4 # 1yyxxxwww + or a3, a3, a0 # 1yyxxxwww /* Skip empty frames - get 'oldest' WINDOWSTART-bit. */ wsr a3, windowstart # save shifted windowstart - neg a4, a3 - and a3, a4, a3 # first bit set from right: 000010000 + neg a0, a3 + and a3, a0, a3 # first bit set from right: 000010000 - ffs_ws a4, a3 # a4: shifts to skip empty frames + ffs_ws a0, a3 # a0: shifts to skip empty frames movi a3, WSBITS - sub a4, a3, a4 # WSBITS-a4:number of 0-bits from right - ssr a4 # save in SAR for later. + sub a0, a3, a0 # WSBITS-a0:number of 0-bits from right + ssr a0 # save in SAR for later. rsr a3, windowbase - add a3, a3, a4 + add a3, a3, a0 wsr a3, windowbase rsync @@ -1285,22 +1142,6 @@ ENTRY(_spill_registers) * we have to save 4,8. or 12 registers. */ - _bbsi.l a3, 1, .Lc4 - _bbsi.l a3, 2, .Lc8 - - /* Special case: we have a call12-frame starting at a4. */ - - _bbci.l a3, 3, .Lc12 # bit 3 shouldn't be zero! (Jump to Lc12 first) - - s32e a4, a1, -16 # a1 is valid with an empty spill area - l32e a4, a5, -12 - s32e a8, a4, -48 - mov a8, a4 - l32e a4, a1, -16 - j .Lc12c - -.Lnospill: - ret .Lloop: _bbsi.l a3, 1, .Lc4 _bbci.l a3, 2, .Lc12 @@ -1314,20 +1155,10 @@ ENTRY(_spill_registers) s32e a9, a4, -28 s32e a10, a4, -24 s32e a11, a4, -20 - srli a11, a3, 2 # shift windowbase by 2 rotw 2 _bnei a3, 1, .Lloop - -.Lexit: /* Done. Do the final rotation, set WS, and return. */ - - rotw 1 - rsr a3, windowbase - ssl a3 - movi a3, 1 - sll a3, a3 - wsr a3, windowstart - ret + j .Lexit .Lc4: s32e a4, a9, -16 s32e a5, a9, -12 @@ -1343,11 +1174,11 @@ ENTRY(_spill_registers) /* 12-register frame (call12) */ - l32e a2, a5, -12 - s32e a8, a2, -48 - mov a8, a2 + l32e a0, a5, -12 + s32e a8, a0, -48 + mov a8, a0 -.Lc12c: s32e a9, a8, -44 + s32e a9, a8, -44 s32e a10, a8, -40 s32e a11, a8, -36 s32e a12, a8, -32 @@ -1367,30 +1198,54 @@ ENTRY(_spill_registers) */ rotw 1 - mov a5, a13 + mov a4, a13 rotw -1 - s32e a4, a9, -16 - s32e a5, a9, -12 - s32e a6, a9, -8 - s32e a7, a9, -4 + s32e a4, a8, -16 + s32e a5, a8, -12 + s32e a6, a8, -8 + s32e a7, a8, -4 rotw 3 _beqi a3, 1, .Lexit j .Lloop -.Linvalid_mask: +.Lexit: - /* We get here because of an unrecoverable error in the window - * registers. If we are in user space, we kill the application, - * however, this condition is unrecoverable in kernel space. - */ + /* Done. Do the final rotation and set WS */ + + rotw 1 + rsr a3, windowbase + ssl a3 + movi a3, 1 + sll a3, a3 + wsr a3, windowstart +.Lnospill: + + /* Advance PC, restore registers and SAR, and return from exception. */ + + l32i a3, a2, PT_SAR + l32i a0, a2, PT_AREG0 + wsr a3, sar + l32i a3, a2, PT_AREG3 - rsr a0, ps - _bbci.l a0, PS_UM_BIT, 1f + /* Restore clobbered registers. */ - /* User space: Setup a dummy frame and kill application. + l32i a4, a2, PT_AREG4 + l32i a7, a2, PT_AREG7 + l32i a8, a2, PT_AREG8 + l32i a11, a2, PT_AREG11 + l32i a12, a2, PT_AREG12 + l32i a15, a2, PT_AREG15 + + movi a2, 0 + rfe + +.Linvalid_mask: + + /* We get here because of an unrecoverable error in the window + * registers, so set up a dummy frame and kill the user application. * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer. */ @@ -1414,14 +1269,136 @@ ENTRY(_spill_registers) movi a4, do_exit callx4 a4 -1: /* Kernel space: PANIC! */ + /* shouldn't return, so panic */ wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 # should not return 1: j 1b -ENDPROC(_spill_registers) + +ENDPROC(fast_syscall_spill_registers) + +/* Fixup handler. + * + * We get here if the spill routine causes an exception, e.g. tlb miss. + * We basically restore WINDOWBASE and WINDOWSTART to the condition when + * we entered the spill routine and jump to the user exception handler. + * + * Note that we only need to restore the bits in windowstart that have not + * been spilled yet by the _spill_register routine. Luckily, a3 contains a + * rotated windowstart with only those bits set for frames that haven't been + * spilled yet. Because a3 is rotated such that bit 0 represents the register + * frame for the current windowbase - 1, we need to rotate a3 left by the + * value of the current windowbase + 1 and move it to windowstart. + * + * a0: value of depc, original value in depc + * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE + * a3: exctable, original value in excsave1 + */ + +ENTRY(fast_syscall_spill_registers_fixup) + + rsr a2, windowbase # get current windowbase (a2 is saved) + xsr a0, depc # restore depc and a0 + ssl a2 # set shift (32 - WB) + + /* We need to make sure the current registers (a0-a3) are preserved. + * To do this, we simply set the bit for the current window frame + * in WS, so that the exception handlers save them to the task stack. + * + * Note: we use a3 to set the windowbase, so we take a special care + * of it, saving it in the original _spill_registers frame across + * the exception handler call. + */ + + xsr a3, excsave1 # get spill-mask + slli a3, a3, 1 # shift left by one + addi a3, a3, 1 # set the bit for the current window frame + + slli a2, a3, 32-WSBITS + src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy...... + wsr a2, windowstart # set corrected windowstart + + srli a3, a3, 1 + rsr a2, excsave1 + l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2 + xsr a2, excsave1 + s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3 + l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task) + xsr a2, excsave1 + + /* Return to the original (user task) WINDOWBASE. + * We leave the following frame behind: + * a0, a1, a2 same + * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE) + * depc: depc (we have to return to that address) + * excsave_1: exctable + */ + + wsr a3, windowbase + rsync + + /* We are now in the original frame when we entered _spill_registers: + * a0: return address + * a1: used, stack pointer + * a2: kernel stack pointer + * a3: available + * depc: exception address + * excsave: exctable + * Note: This frame might be the same as above. + */ + + /* Setup stack pointer. */ + + addi a2, a2, -PT_USER_SIZE + s32i a0, a2, PT_AREG0 + + /* Make sure we return to this fixup handler. */ + + movi a3, fast_syscall_spill_registers_fixup_return + s32i a3, a2, PT_DEPC # setup depc + + /* Jump to the exception handler. */ + + rsr a3, excsave1 + rsr a0, exccause + addx4 a0, a0, a3 # find entry in table + l32i a0, a0, EXC_TABLE_FAST_USER # load handler + l32i a3, a3, EXC_TABLE_DOUBLE_SAVE + jx a0 + +ENDPROC(fast_syscall_spill_registers_fixup) + +ENTRY(fast_syscall_spill_registers_fixup_return) + + /* When we return here, all registers have been restored (a2: DEPC) */ + + wsr a2, depc # exception address + + /* Restore fixup handler. */ + + rsr a2, excsave1 + s32i a3, a2, EXC_TABLE_DOUBLE_SAVE + movi a3, fast_syscall_spill_registers_fixup + s32i a3, a2, EXC_TABLE_FIXUP + rsr a3, windowbase + s32i a3, a2, EXC_TABLE_PARAM + l32i a2, a2, EXC_TABLE_KSTK + + /* Load WB at the time the exception occurred. */ + + rsr a3, sar # WB is still in SAR + neg a3, a3 + wsr a3, windowbase + rsync + + rsr a3, excsave1 + l32i a3, a3, EXC_TABLE_DOUBLE_SAVE + + rfde + +ENDPROC(fast_syscall_spill_registers_fixup_return) #ifdef CONFIG_MMU /* @@ -1794,6 +1771,43 @@ ENTRY(system_call) ENDPROC(system_call) +/* + * Spill live registers on the kernel stack macro. + * + * Entry condition: ps.woe is set, ps.excm is cleared + * Exit condition: windowstart has single bit set + * May clobber: a12, a13 + */ + .macro spill_registers_kernel + +#if XCHAL_NUM_AREGS > 16 + call12 1f + _j 2f + retw + .align 4 +1: + _entry a1, 48 + addi a12, a0, 3 +#if XCHAL_NUM_AREGS > 32 + .rept (XCHAL_NUM_AREGS - 32) / 12 + _entry a1, 48 + mov a12, a0 + .endr +#endif + _entry a1, 48 +#if XCHAL_NUM_AREGS % 12 == 0 + mov a8, a8 +#elif XCHAL_NUM_AREGS % 12 == 4 + mov a12, a12 +#elif XCHAL_NUM_AREGS % 12 == 8 + mov a4, a4 +#endif + retw +2: +#else + mov a12, a12 +#endif + .endm /* * Task switch. @@ -1806,21 +1820,20 @@ ENTRY(_switch_to) entry a1, 16 - mov a12, a2 # preserve 'prev' (a2) - mov a13, a3 # and 'next' (a3) + mov a10, a2 # preserve 'prev' (a2) + mov a11, a3 # and 'next' (a3) l32i a4, a2, TASK_THREAD_INFO l32i a5, a3, TASK_THREAD_INFO - save_xtregs_user a4 a6 a8 a9 a10 a11 THREAD_XTREGS_USER + save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER - s32i a0, a12, THREAD_RA # save return address - s32i a1, a12, THREAD_SP # save stack pointer + s32i a0, a10, THREAD_RA # save return address + s32i a1, a10, THREAD_SP # save stack pointer /* Disable ints while we manipulate the stack pointer. */ - movi a14, (1 << PS_EXCM_BIT) | LOCKLEVEL - xsr a14, ps + rsil a14, LOCKLEVEL rsr a3, excsave1 rsync s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */ @@ -1835,7 +1848,7 @@ ENTRY(_switch_to) /* Flush register file. */ - call0 _spill_registers # destroys a3, a4, and SAR + spill_registers_kernel /* Set kernel stack (and leave critical section) * Note: It's save to set it here. The stack will not be overwritten @@ -1851,13 +1864,13 @@ ENTRY(_switch_to) /* restore context of the task 'next' */ - l32i a0, a13, THREAD_RA # restore return address - l32i a1, a13, THREAD_SP # restore stack pointer + l32i a0, a11, THREAD_RA # restore return address + l32i a1, a11, THREAD_SP # restore stack pointer - load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER + load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER wsr a14, ps - mov a2, a12 # return 'prev' + mov a2, a10 # return 'prev' rsync retw diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 7d12af1317f1..84fe931bb60e 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -22,6 +22,7 @@ #include <linux/bootmem.h> #include <linux/kernel.h> #include <linux/percpu.h> +#include <linux/clk-provider.h> #include <linux/cpu.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> @@ -276,6 +277,7 @@ void __init early_init_devtree(void *params) static int __init xtensa_device_probe(void) { + of_clk_init(NULL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); return 0; } diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 08b769d3b3a1..2a1823de69cc 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -30,6 +30,7 @@ #include <asm/platform.h> unsigned long ccount_freq; /* ccount Hz */ +EXPORT_SYMBOL(ccount_freq); static cycle_t ccount_read(struct clocksource *cs) { diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index cb8fd44caabc..f9e1ec346e35 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -235,7 +235,7 @@ ENTRY(_DoubleExceptionVector) /* Check for overflow/underflow exception, jump if overflow. */ - _bbci.l a0, 6, _DoubleExceptionVector_WindowOverflow + bbci.l a0, 6, _DoubleExceptionVector_WindowOverflow /* * Restart window underflow exception. diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index 74a60c7e085e..80b33ed51f31 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -122,9 +122,7 @@ EXPORT_SYMBOL(insw); EXPORT_SYMBOL(insl); extern long common_exception_return; -extern long _spill_registers; EXPORT_SYMBOL(common_exception_return); -EXPORT_SYMBOL(_spill_registers); #ifdef CONFIG_FUNCTION_TRACER EXPORT_SYMBOL(_mcount); diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 479d7537a32a..aff108df92d3 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -90,7 +90,7 @@ int __init mem_reserve(unsigned long start, unsigned long end, int must_exist) /* - * Initialize the bootmem system and give it all the memory we have available. + * Initialize the bootmem system and give it all low memory we have available. */ void __init bootmem_init(void) @@ -142,9 +142,14 @@ void __init bootmem_init(void) /* Add all remaining memory pieces into the bootmem map */ - for (i=0; i<sysmem.nr_banks; i++) - free_bootmem(sysmem.bank[i].start, - sysmem.bank[i].end - sysmem.bank[i].start); + for (i = 0; i < sysmem.nr_banks; i++) { + if (sysmem.bank[i].start >> PAGE_SHIFT < max_low_pfn) { + unsigned long end = min(max_low_pfn << PAGE_SHIFT, + sysmem.bank[i].end); + free_bootmem(sysmem.bank[i].start, + end - sysmem.bank[i].start); + } + } } diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c index 36ec171698b8..861203e958da 100644 --- a/arch/xtensa/mm/mmu.c +++ b/arch/xtensa/mm/mmu.c @@ -39,7 +39,7 @@ void init_mmu(void) set_itlbcfg_register(0); set_dtlbcfg_register(0); #endif -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF +#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) /* * Update the IO area mapping in case xtensa_kio_paddr has changed */ diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 800227862fe8..57fd08b36f51 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -135,11 +135,11 @@ static void __init update_local_mac(struct device_node *node) static int __init machine_setup(void) { - struct device_node *serial; + struct device_node *clock; struct device_node *eth = NULL; - for_each_compatible_node(serial, NULL, "ns16550a") - update_clock_frequency(serial); + for_each_node_by_name(clock, "main-oscillator") + update_clock_frequency(clock); if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc"))) update_local_mac(eth); @@ -290,6 +290,7 @@ static int __init xtavnet_init(void) * knows whether they set it correctly on the DIP switches. */ pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr); + ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR; return 0; } diff --git a/arch/xtensa/variants/fsf/include/variant/tie.h b/arch/xtensa/variants/fsf/include/variant/tie.h index bf4020116df5..244cdea4dee5 100644 --- a/arch/xtensa/variants/fsf/include/variant/tie.h +++ b/arch/xtensa/variants/fsf/include/variant/tie.h @@ -18,13 +18,6 @@ #define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */ #define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ -/* Basic parameters of each coprocessor: */ -#define XCHAL_CP7_NAME "XTIOP" -#define XCHAL_CP7_IDENT XTIOP -#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ -#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ -#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ - /* Filler info for unassigned coprocessors, to simplify arrays etc: */ #define XCHAL_NCP_SA_SIZE 0 #define XCHAL_NCP_SA_ALIGN 1 @@ -42,6 +35,8 @@ #define XCHAL_CP5_SA_ALIGN 1 #define XCHAL_CP6_SA_SIZE 0 #define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_SIZE 0 +#define XCHAL_CP7_SA_ALIGN 1 /* Save area for non-coprocessor optional and custom (TIE) state: */ #define XCHAL_NCP_SA_SIZE 0 |