summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-06-18via-velocity : fix no link detection on bootSéguier Régis1-1/+3
on boot, link is always up. Signed-off-by: Seguier Regis <rseguier@e-teleport.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18Net / e100: Fix suspend of devices that cannot be power managedRafael J. Wysocki1-5/+6
If the adapter is not power-manageable using either ACPI, or the native PCI PM interface, __e100_power_off() returns error code, which causes every attempt to suspend to fail, although it should return 0 in such a case. Fix this problem by ignoring the return value of pci_set_power_state() in __e100_power_off(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18TI DaVinci EMAC : Fix rmmod errorchaithrika@ti.com1-1/+0
clk_disable was called twice in the remove function. Correct this so that the driver module unloads without error. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18net: group address list and its countJiri Pirko7-16/+16
This patch is inspired by patch recently posted by Johannes Berg. Basically what my patch does is to group list and a count of addresses into newly introduced structure netdev_hw_addr_list. This brings us two benefits: 1) struct net_device becames a bit nicer. 2) in the future there will be a possibility to operate with lists independently on netdevices (with exporting right functions). I wanted to introduce this patch before I'll post a multicast lists conversion. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 4 +- drivers/net/e1000/e1000_main.c | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/mv643xx_eth.c | 2 +- drivers/net/niu.c | 4 +- drivers/net/virtio_net.c | 10 ++-- drivers/s390/net/qeth_l2_main.c | 2 +- include/linux/netdevice.h | 17 +++-- net/core/dev.c | 130 ++++++++++++++++++-------------------- 9 files changed, 89 insertions(+), 90 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: version 1.23Stephen Hemminger1-1/+1
Version bump. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: add GRO supportStephen Hemminger1-8/+21
Add support for generic receive offload. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: skb recyclingStephen Hemminger2-11/+28
This patch implements skb recycling. It reclaims transmitted skb's for use in the receive ring. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: reduce default transmit ringStephen Hemminger1-2/+2
Reduce the size of the driver transmit ring to reduce latency and allow qdisc to do better rate control. Also make it obvious what the minimum transmit ring allowed is and why. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: receive counter updateStephen Hemminger1-10/+19
Since it is likely that there are multiple packets received per interrupt, only update the receive counters once after all packets are processed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: fix shutdown synchronizationStephen Hemminger1-5/+9
The logic in sky2_down was incorrect. Receiver could report status after rx_stop was called. The steps need to be: * stop new frames from being transmitted * shut off transmit/receive logic * synchronize with NAPI to process status info about transmitter and receiver Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: PCI irq issuesStephen Hemminger1-0/+2
Add some read's to avoid any PCI posting issues when controlling irq's. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: more receive shutdownStephen Hemminger1-1/+8
Reset more parts of the receive path when device is take offline. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sky2: turn off pause during shutdownStephen Hemminger1-1/+2
This unblocks the chip if it is stuck in pause cycle during shutdown. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17r8169: do not bring device down when suspendingfrançois romieu1-11/+8
Stopping all activity through ChipCmd and blindly acking the irqs is neither nice nor completely needed: the transition to low-power mode does enough work and it apparently keeps the device in a sane state. Patch suggested by a fix for http://bugzilla.kernel.org/show_bug.cgi?id=9512 The rtl_shutdown path is kept unchanged so far. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Anders Eriksson <aeriksson@fastmail.fm> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sis190: use an adequate phy list entry as a fallbackfrançois romieu1-1/+1
When sis190 driver is trying to get default phy, if it doesn't find home or lan phy, it falls back to the first phy in the phy list but list_entry() points to a bogus entry. list_first_entry() should be used instead. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17net/ucc_geth: Add SGMII support for UCC GETH driverHaiying Wang2-2/+84
-- derived from reverted commit 047584ce94108012288554a5f84585d792cc7f8f -- reworked by Grant Likely to play nice with commit: "net: Rework ucc_geth driver to use of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4) Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17Revert "net/ucc_geth: Add SGMII support for UEC GETH driver"Grant Likely2-105/+2
This reverts commit 047584ce94108012288554a5f84585d792cc7f8f. This patch meshes badly with "net: Rework ucc_geth driver to use of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4). Since most of the patch needs to be reworked, it is clearer to revert the patch and then apply the corrected version Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17phy_device: fix parameter name in kernel-docRandy Dunlap1-1/+1
Fix kernel-doc parameter name in phy_device.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17net: fix network drivers ndo_start_xmit() return valuesPatrick McHardy4-31/+24
Fix up remaining drivers returning a magic or an errno value from their ndo_start_xmit() functions that were missed in the first pass: - isdn_net: missed conversion - bpqether: missed conversion: skb is freed, so return NETDEV_TX_OK - hp100: intention appears to be to resubmit skb once resources are available, but due to no queue handling it is dropped for now. - lapbether: skb is freed, so return NETDEV_TX_OK Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17vxge: Enable SRIOV support in the driver.Sivakumar Subramani3-7/+22
- Enabled SRIOV support in the driver. - Call __vxge_hw_verify_pci_e_info() for the PF only. This function verifies the negotiated link width and current link speed in the Link Status Register (offset 12h) which are reserved fields for VFs as per the SRIOV specification, section 3.5.8. - Implemented David Miller's comment to remove the #ifdef CONFIG_PCI_IOV as these intefaces have NOP versions declared when the defintion is not set. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Rastapur Santosh <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sonic: Fix build after ndo_start_xmit() changes.David S. Miller1-1/+1
Noticed by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16Merge branch 'master' of ↵David S. Miller13-187/+156
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-06-16sky2: don't look for VPD sizeStephen Hemminger1-15/+16
The code to compute VPD size didn't handle some systems that use chip without VPD. Also some of the newer chips use some additional registers to store the actual size, and wasn't worth putting the additional complexity in, so just remove the code. No big loss since the code to set the VPD size was only a convenience so that utilities would not read the extra space past the end of the available VPD. Move the first PCI config read earlier to detect bad hardware where it returns all ones and refuse loading driver before furthur damage. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15ath9k: process rx packet if we are waiting for CABGabor Juhos1-0/+1
If we are in PS mode, we have to process the received frame if the SC_OP_WAIT_FOR_CAB bit is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: prevent sleeping while we are waiting for CABGabor Juhos1-0/+1
We have to remain awake if the SC_OP_WAIT_FOR_CAB flag is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: restore power mode on error pathGabor Juhos1-3/+6
The ath9k_ps_{wakeup,restore} calls must be in balance. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15dell-laptop: fix rfkill conversionJohannes Berg1-1/+1
A polarity error snuck into the rfkill rewrite's dell-laptop conversion, fix it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: port to cfg80211 rfkillJohannes Berg5-110/+26
This ports the ath9k rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. ("With this series a kernel panic, which is a regression, during module unload disappears." -- Vasanthakumar Thiagarajan <vasanth@atheros.com> Other patches in the series: ath9k: Add helper to get ath9k specific current channel ath9k: Make sure we have current channel in ah_curchan before rf disable/enable -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Rodriguez <mcgrof@gmail.com> Tested-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: Make sure we have current channel in ah_curchan before rf disable/enableVasanthakumar Thiagarajan1-0/+6
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: Add helper to get ath9k specific current channelVasanthakumar Thiagarajan1-5/+16
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath5k: fix mesh beaconingNick Kossifidis1-2/+3
This patch is from Nick Kossifidis but he forgot to send it. It ensures that the beacon queue gets started in mesh mode as well, otherwise ath5k will not beacon in mesh point mode. At this time, we still need to issue a scan before mesh beaconing will work but that appears to be a separate problem. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi/iwl3945: fix suspend resume association bugAbhijeet Kolekar2-4/+1
Patch fixes the following bugs at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2005 http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2007 If we suspend with an association and then resumed, we need to synchronize the active rxon with staging rxon, else we will get an error when iwl_alive_start try to commit rxon and staging is set to channel 0. Before going to suspend staging and active rxon are in sync. After resuming from the suspend, iwl_mac_start is called and it clears the staging rxon. Patch fixes the bug by not clearing the staging rxon in iwl_mac_start. Patch also adds similar fix to 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check for channel location for 40MHzWey-Yi Guy1-7/+3
for both mixed and pure 40MHz, need to check for valid channel location. if the specified channel not allow the channel location requested (ABOVE, BELOW), then reject the Fat channel access This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1988 ("iwlwifi: checking for 40MHz mode" and "iwlwifi: check control channel for pure 40MHz" combine with this to address the above bug. -- JWL) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check control channel for pure 40MHzWey-Yi Guy1-2/+11
for pure 40MHz mode, set the control channel location if provided, but not like Mixed mode; if information is not provided, still allow 40MHz operation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: checking for 40MHz modeWey-Yi Guy1-2/+2
when checking for 40MHz, compare ht_protection to IEEE80211_HT_OP_MODE_PROTECTION_20MHZ. ht_protection is not a bit-mask field Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: revamp bss_info_changedJohannes Berg1-44/+70
My earlier patch, "mac80211: unify config_interface and bss_info_changed" introduced a bug in iwlwifi where it will do some things incorrectly now when reassociating. Revamp iwl_bss_info_changed to fix that issue and make it easier to read. Also, while at it, add comments about things that it should do but currently doesn't. Finally, also improve the locking in the function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15net/libertas: don't recursive spin lock in if_spi_e2h()Sebastian Andrzej Siewior1-4/+0
|BUG: spinlock recursion on CPU#0, lbs_spi_thread/1030 | lock: dee9a1bc, .magic: dead4ead, .owner: lbs_spi_thread/1030, .owner_cpu: 0 |Call Trace: |[deec3eb0] [c0007220] show_stack+0x4c/0x15c (unreliable) |[deec3ef0] [c0187720] spin_bug+0x9c/0xb0 |[deec3f10] [c0187890] _raw_spin_lock+0x54/0x148 |[deec3f40] [c02d260c] _spin_lock_irqsave+0x2c/0x44 |[deec3f60] [e8671800] lbs_queue_event+0x7c/0x130 [libertas] |[deec3f80] [e8725f04] lbs_spi_thread+0x538/0x58c [libertas_spi] |[deec3fe0] [c004f270] kthread+0x4c/0x88 |[deec3ff0] [c000f33c] kernel_thread+0x4c/0x68 if_spi_e2h() is grabbing ->driver_lock just while calling lbs_queue_event() which is grabbing the same lock. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15libertas: fix IEEE PS mode in GSPI driverAndrey Yurovsky1-1/+6
The card firmware does not set the Command Download Ready interrupt bit when IEEE PS mode is enabled, preventing the driver from sending commands (such as the command to exit IEEE PS mode) since there is no indication that the card is ready to accept commands. This patch works around the problem by using the the TX Download Ready bit in place of the Command Download Ready Bit while in IEEE PS mode. TX Download Ready is set in IEEE PS mode. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15sony: fix rfkill code againJohannes Berg1-2/+3
When the hard state changes, we shouldn't set the soft state to blocked as well -- we have no such indication from the device in that case so leave it untouched. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13458. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15Merge branch 'master' of ↵David S. Miller725-17371/+79188
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds24-136/+181
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTx IB/mthca: Don't double-free IRQs when falling back from MSI-X to INTx IB/mlx4: Add strong ordering to local inval and fast reg work requests IB/ehca: Remove superfluous bitmasks from QP control block RDMA/cxgb3: Limit fast register size based on T3 limitations RDMA/cxgb3: Report correct port state and MTU mlx4_core: Add module parameter for number of MTTs per segment IB/mthca: Add module parameter for number of MTTs per segment RDMA/nes: Fix off-by-one bugs in reset_adapter_ne020() and init_serdes() infiniband: Remove void casts IB/ehca: Increment version number IB/ehca: Remove unnecessary memory operations for userspace queue pairs IB/ehca: Fall back to vmalloc() for big allocations IB/ehca: Replace vmalloc() with kmalloc() for queue allocation
2009-06-14fusion: fix recent kernel-doc problemsRandy Dunlap2-4/+3
Fix recent fusion driver kernel-doc fatal error and warnings. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric.Moore@lsi.com Cc: support@lsi.com Cc: DL-MPTFusionLinux@lsi.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds26-203/+2129
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (25 commits) atmel-mci: add MCI2 register definitions atmel-mci: Integrate AT91 specific definition in header file tmio_mmc: allow compilation for ASIC3 mmc_block: do not DMA to stack sdhci: Print ADMA status and pointer on debug tmio_mmc: fix clock setup tmio_mmc: map SD control registers after enabling the MFD cell tmio_mmc: correct probe return value for num_resources != 3 tmio_mmc: don't use set_irq_type tmio_mmc: add bus_shift support MFD,mmc: tmio_mmc: make HCLK configurable mmc_spi: don't use EINVAL for possible transmission errors cb710: more cleanup for the DEBUG case. sdhci: platform driver for SDHCI mxcmmc: remove frequency workaround cb710: handle DEBUG define in Makefile cb710: add missing parenthesis cb710: fix printk format string mmc: Driver for CB710/720 memory card reader (MMC part) pxamci: add regulator support. ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds64-95/+96
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds16-51/+805
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix inverted wheel for bluetooth version of apple mighty mouse HID: no more reinitializtion is needed in post_reset HID: hidraw -- fix comment about accepted devices HID: Multitouch support for the N-Trig touchscreen HID: add new multitouch and digitizer contants HID: autocentering support for Logitech Force 3D Pro HID: fix hid-ff drivers so that devices work even without ff support HID: force feedback support for SmartJoy PLUS PS2/USB adapter HID: Wacom Graphire Bluetooth driver HID: autocentering support for Logitech G25 Racing Wheel
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds43-178/+4145
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-14Merge branches 'cxgb3', 'ehca', 'misc', 'mlx4', 'mthca' and 'nes' into for-linusRoland Dreier22-133/+150
2009-06-14mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTxRoland Dreier1-1/+3
When both MSI-X and legacy INTx fail to generate an interrupt, the driver frees the MSI-X interrupts twice. Fix this by clearing the have_irq flag for the MSI-X interrupts when they are freed the first time. This is the same bug that was reported in ib_mthca by Yinghai Lu <yhlu.kernel@gmail.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-14Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driverMarcel Holtmann1-0/+2
The current build shows a warning with the DTL-1 driver: CC [M] drivers/bluetooth/dtl1_cs.o drivers/bluetooth/dtl1_cs.c: In function ‘dtl1_hci_send_frame’: drivers/bluetooth/dtl1_cs.c:396: warning: ‘nsh.type’ may be used uninitialized in this function Fix this by adding a proper error for unknown packet types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-14Merge branch 'for-rmk' of ↵Russell King9-6/+1570
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 22:30:59 +0000