/* -*- Mode: c; tab-width: 8; c-basic-offset: 4; indent-tabs-mode: t; -*- */ /* cairo - a vector graphics library with display and print output * * Copyright © 2002 University of Southern California * Copyright © 2005 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it either under the terms of the GNU Lesser General Public * License version 2.1 as published by the Free Software Foundation * (the "LGPL") or, at your option, under the terms of the Mozilla * Public License Version 1.1 (the "MPL"). If you do not alter this * notice, a recipient may use your version of this file under either * the MPL or the LGPL. * * You should have received a copy of the LGPL along with this library * in the file COPYING-LGPL-2.1; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * You should have received a copy of the MPL along with this library * in the file COPYING-MPL-1.1 * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY * OF ANY KIND, either express or implied. See the LGPL or the MPL for * the specific language governing rights and limitations. * * The Original Code is the cairo graphics library. * * The Initial Developer of the Original Code is University of Southern * California. * * Contributor(s): * Carl D. Worth */ #include "cairoint.h" #include "cairo-surface-fallback-private.h" #include "cairo-clip-private.h" typedef struct { cairo_surface_t *dst; cairo_rectangle_int_t extents; cairo_image_surface_t *image; cairo_rectangle_int_t image_rect; void *image_extra; } fallback_state_t; /** * _fallback_init: * * Acquire destination image surface needed for an image-based * fallback. * * Return value: %CAIRO_INT_STATUS_NOTHING_TO_DO if the extents are not * visible, %CAIRO_STATUS_SUCCESS if some portion is visible and all * went well, or some error status otherwise. **/ static cairo_int_status_t _fallback_init (fallback_state_t *state, cairo_surface_t *dst, int x, int y, int width, int height) { cairo_status_t status; state->extents.x = x; state->extents.y = y; state->extents.width = width; state->extents.height = height; state->dst = dst; status = _cairo_surface_acquire_dest_image (dst, &state->extents, &state->image, &state->image_rect, &state->image_extra); if (status) return status; /* XXX: This NULL value tucked away in state->image is a rather * ugly interface. Cleaner would be to push the * CAIRO_INT_STATUS_NOTHING_TO_DO value down into * _cairo_surface_acquire_dest_image and its backend * counterparts. */ if (state->image == NULL) return CAIRO_INT_STATUS_NOTHING_TO_DO; return CAIRO_STATUS_SUCCESS; } static void _fallback_fini (fallback_state_t *state) { _cairo_surface_release_dest_image (state->dst, &state->extents, state->image, &state->image_rect, state->image_extra); } typedef cairo_status_t (*cairo_draw_func_t) (void *closure, cairo_operator_t op, cairo_pattern_t *src, cairo_surface_t *dst, int dst_x, int dst_y, const cairo_rectangle_int_t *extents); static cairo_status_t _create_composite_mask_pattern (cairo_surface_pattern_t *mask_pattern, cairo_clip_t *clip, cairo_draw_func_t draw_func, void *draw_closure, cairo_surface_t *dst, const cairo_rectangle_int_t *extents) { cairo_surface_t *mask; cairo_status_t status; mask = cairo_surface_create_similar (dst, CAIRO_CONTENT_ALPHA, extents->width, extents->height); if (mask->status) return mask->status; status = (*draw_func) (draw_closure, CAIRO_OPERATOR_ADD, NULL, mask, extents->x, extents->y, extents); if (status) goto CLEANUP_SURFACE; if (clip && clip->surface) status = _cairo_clip_combine_to_surface (clip, CAIRO_OPERATOR_IN, mask, extents->x, extents->y, extents); if (status) goto CLEANUP_SURFACE; _cairo_pattern_init_for_surface (mask_pattern, mask); CLEANUP_SURFACE: cairo_surface_destroy (mask); return status; } /* Handles compositing with a clip surface when the operator allows * us to combine the clip with the mask */ static cairo_status_t _clip_and_composite_with_mask (cairo_clip_t *clip, cairo_operator_t op, cairo_pattern_t *src, cairo_draw_func_t draw_func, void *draw_closure, cairo_surface_t *dst, const cairo_rectangle_int_t *extents) { cairo_surface_pattern_t mask_pattern; cairo_status_t status; status = _create_composite_mask_pattern (&mask_pattern, clip, draw_func, draw_closure, dst, extents); if (status) return status; status = _cairo_surface_composite (op, src, &mask_pattern.base, dst, extents->x, extents->y, 0, 0, extents->x, extents->y, extents->width, extents->height); _cairo_pattern_fini (&mask_pattern.base); return status; } /* Handles compositing with a clip surface when we have to do the operation * in two pieces and combine them together. */ static cairo_status_t _clip_and_composite_combine (cairo_clip_t *clip, cairo_operator_t op, cairo_pattern_t *src, cairo_draw_func_t draw_func, void *draw_closure, cairo_surface_t *dst, const cairo_rectangle_int_t *extents) { cairo_surface_t *intermediate; cairo_surface_pattern_t dst_pattern; cairo_surface_pattern_t intermediate_pattern; cairo_status_t status; /* We'd be better off here creating a surface identical in format * to dst, but we have no way of getting that information. * A CAIRO_CONTENT_CLONE or something might be useful. * cairo_surface_create_similar() also unnecessarily clears the surface. */ intermediate = cairo_surface_create_similar (dst, CAIRO_CONTENT_COLOR_ALPHA, extents->width, extents->height); if (intermediate->status) return intermediate->status; /* Initialize the intermediate surface from the destination surface */ _cairo_pattern_init_for_surface (&dst_pattern, dst); status = _cairo_surface_composite (CAIRO_OPERATOR_SOURCE, &dst_pattern.base, NULL, intermediate, extents->x, extents->y, 0, 0, 0, 0, extents->width, extents->height); _cairo_pattern_fini (&dst_pattern.base); if (status) goto CLEANUP_SURFACE; status = (*draw_func) (draw_closure, op, src, intermediate, extents->x, extents->y, extents); if (status) goto CLEANUP_SURFACE; /* Combine that with the clip */ status = _cairo_clip_combine_to_surface (clip, CAIRO_OPERATOR_DEST_IN, intermediate, extents->x, extents->y, extents); if (status) goto CLEANUP_SURFACE; /* Punch the clip out of the destination */ status = _cairo_clip_combine_to_surface (clip, CAIRO_OPERATOR_DEST_OUT, dst, 0, 0, extents); if (status) goto CLEANUP_SURFACE; /* Now add the two results together */ _cairo_pattern_init_for_surface (&intermediate_pattern, intermediate); status = _cairo_surface_composite (CAIRO_OPERATOR_ADD, &intermediate_pattern.base, NULL, dst, 0, 0, 0, 0, extents->x, extents->y, extents->width, extents->height); _cairo_pattern_fini (&intermediate_pattern.base); CLEANUP_SURFACE: cairo_surface_destroy (intermediate); return status; } /* Handles compositing for %CAIRO_OPERATOR_SOURCE, which is special; it's * defined as (src IN mask IN clip) ADD (dst OUT (mask IN clip)) */ static cairo_status_t _clip_and_composite_source (cairo_clip_t *clip, cairo_pattern_t *src, cairo_draw_func_t draw_func, void *draw_closure, cairo_surface_t *dst, const cairo_rectangle_int_t *extents) { cairo_surface_pattern_t mask_pattern; cairo_status_t status; /* Create a surface that is mask IN clip */ status = _create_composite_mask_pattern (&mask_pattern, clip, draw_func, draw_closure, dst, extents); if (status) return status; /* Compute dest' = dest OUT (mask IN clip) */ status = _cairo_surface_composite (CAIRO_OPERATOR_DEST_OUT, &mask_pattern.base, NULL, dst, 0, 0, 0, 0, extents->x, extents->y, extents->width, extents->height); if (status) goto CLEANUP_MASK_PATTERN; /* Now compute (src IN (mask IN clip)) ADD dest' */ status = _cairo_surface_composite (CAIRO_OPERATOR_ADD, src, &mask_pattern.base, dst, extents->x, extents->y, 0, 0, extents->x, extents->y, extents->width, extents->height); CLEANUP_MASK_PATTERN: _cairo_pattern_fini (&mask_pattern.base); return status; } static int _cairo_rectangle_empty (const cairo_rectangle_int_t *rect) { return rect->width == 0 || rect->height == 0; } /** * _clip_and_composite: * @clip: a #cairo_clip_t * @op: the operator to draw with * @src: source pattern * @draw_func: function that can be called to draw with the mask onto a surface. * @draw_closure: data to pass to @draw_func. * @dst: destination surface * @extents: rectangle holding a bounding box for the operation; this * rectangle will be used as the size for the temporary * surface. * * When there is a surface clip, we typically need to create an intermediate * surface. This function handles the logic of creating a temporary surface * drawing to it, then compositing the result onto the target surface. * * @draw_func is to called to draw the mask; it will be called no more * than once. * * Return value: %CAIRO_STATUS_SUCCESS if the drawing succeeded. **/ static cairo_status_t _clip_and_composite (cairo_clip_t *clip, cairo_operator_t op, cairo_pattern_t *src, cairo_draw_func_t draw_func, void *draw_closure, cairo_surface_t *dst, const cairo_rectangle_int_t *extents) { cairo_solid_pattern_t solid_pattern; cairo_status_t status; if (_cairo_rectangle_empty (extents)) /* Nothing to do */ return CAIRO_STATUS_SUCCESS; if (op == CAIRO_OPERATOR_CLEAR) { _cairo_pattern_init_solid (&solid_pattern, CAIRO_COLOR_WHITE, CAIRO_CONTENT_COLOR); src = &solid_pattern.base; op = CAIRO_OPERATOR_DEST_OUT; } if ((clip && clip->surface) || op == CAIRO_OPERATOR_SOURCE) { if (op == CAIRO_OPERATOR_SOURCE) status = _clip_and_composite_source (clip, src, draw_func, draw_closure, dst, extents); else if (_cairo_operator_bounded_by_mask (op)) status = _clip_and_composite_with_mask (clip, op, src, draw_func, draw_closure, dst, extents); else status = _clip_and_composite_combine (clip, op, src, draw_func, draw_closure, dst, extents); } else { status = (*draw_func) (draw_closure, op, src, dst, 0, 0, extents); } if (src == &solid_pattern.base) _cairo_pattern_fini (&solid_pattern.base); return status; } /* Composites a region representing a set of trapezoids. */ static cairo_status_t _composite_trap_region (cairo_clip_t *clip, cairo_pattern_t *src, cairo_operator_t op, cairo_surface_t *dst, cairo_region_t *trap_region, cairo_rectangle_int_t *extents) { cairo_status_t status; cairo_solid_pattern_t solid_pattern; cairo_surface_pattern_t mask; int num_rects = _cairo_region_num_boxes (trap_region); unsigned int clip_serial; cairo_surface_t *clip_surface = clip ? clip->surface : NULL; if (clip_surface && op == CAIRO_OPERATOR_CLEAR) { _cairo_pattern_init_solid (&solid_pattern, CAIRO_COLOR_WHITE, CAIRO_CONTENT_COLOR); src = &solid_pattern.base; op = CAIRO_OPERATOR_DEST_OUT; } if (num_rects == 0) return CAIRO_STATUS_SUCCESS; if (num_rects > 1) { if (_cairo_surface_get_clip_mode (dst) != CAIRO_CLIP_MODE_REGION) return CAIRO_INT_STATUS_UNSUPPORTED; clip_serial = _cairo_surface_allocate_clip_serial (dst); status = _cairo_surface_set_clip_region (dst, trap_region, clip_serial); if (status) return status; } if (clip_surface) _cairo_pattern_init_for_surface (&mask, clip_surface); status = _cairo_surface_composite (op, src, clip_surface ? &mask.base : NULL, dst, extents->x, extents->y, extents->x - (clip_surface ? clip->surface_rect.x : 0), extents->y - (clip_surface ? clip->surface_rect.y : 0), extents->x, extents->y, extents->width, extents->height); /* Restore the original clip if we modified it temporarily. */ if (num_rects > 1) { cairo_status_t status2 = _cairo_surface_set_clip (dst, clip); if (status == CAIRO_STATUS_SUCCESS) status = status2; } if (clip_surface) _cairo_pattern_fini (&mask.base); if (src == &solid_pattern.base) _cairo_pattern_fini (&solid_pattern.base); return status; } typedef struct { cairo_traps_t *traps; cairo_antialias_t antialias; } cairo_composite_traps_info_t; static cairo_status_t _composite_traps_draw_func (void *closure, cairo_operator_t op, cairo_pattern_t *src, cairo_surface_t *dst, int dst_x, int dst_y, const cairo_rectangle_int_t *extents) { cairo_composite_traps_info_t *info = closure; cairo_solid_pattern_t pattern; cairo_status_t status; if (dst_x != 0 || dst_y != 0) _cairo_traps_translate (info->traps, - dst_x, - dst_y); _cairo_pattern_init_solid (&pattern, CAIRO_COLOR_WHITE, CAIRO_CONTENT_COLOR); if (!src) src = &pattern.base; status = _cairo_surface_composite_trapezoids (op, src, dst, info->antialias, extents->x, extents->y, extents->x - dst_x, extents->y - dst_y, extents->width, extents->height, info->traps->traps, info->traps->num_traps); _cairo_pattern_fini (&pattern.base); return status; } /* Warning: This call modifies the coordinates of traps */ static cairo_status_t _clip_and_composite_trapezoids (cairo_pattern_t *src, cairo_operator_t op, cairo_surface_t *dst, cairo_traps_t *traps, cairo_clip_t *clip, cairo_antialias_t antialias) { cairo_status_t status; cairo_region_t trap_region; cairo_region_t clear_region; cairo_bool_t has_trap_region = FALSE; cairo_bool_t has_clear_region = FALSE; cairo_rectangle_int_t extents; cairo_composite_traps_info_t traps_info; if (_cairo_operator_bounded_by_mask (op) && traps->num_traps == 0) return CAIRO_STATUS_SUCCESS; status = _cairo_surface_get_extents (dst, &extents); if (status) return status; status = _cairo_traps_extract_region (traps, &trap_region); if (CAIRO_INT_STATUS_UNSUPPORTED == status) { has_trap_region = FALSE; } else if (status) { return status; } else { has_trap_region = TRUE; } if (_cairo_operator_bounded_by_mask (op)) { cairo_rectangle_int_t trap_extents; if (has_trap_region) { status = _cairo_clip_intersect_to_region (clip, &trap_region); if (status) goto out; _cairo_region_get_extents (&trap_region, &trap_extents); } else { cairo_box_t trap_box; _cairo_traps_extents (traps, &trap_box); _cairo_box_round_to_rectangle (&trap_box, &trap_extents); } if (! _cairo_rectangle_intersect (&extents, &trap_extents)) { status = CAIRO_STATUS_SUCCESS; goto out; } status = _cairo_clip_intersect_to_rectangle (clip, &extents); if (status) goto out; } else { cairo_surface_t *clip_surface = clip ? clip->surface : NULL; if (has_trap_region && !clip_surface) { /* If we optimize drawing with an unbounded operator to * _cairo_surface_fill_rectangles() or to drawing with a * clip region, then we have an additional region to clear. */ _cairo_region_init_rect (&clear_region, &extents); has_clear_region = TRUE; status = _cairo_clip_intersect_to_region (clip, &clear_region); if (status) goto out; _cairo_region_get_extents (&clear_region, &extents); status = _cairo_region_subtract (&clear_region, &clear_region, &trap_region); if (status) goto out; if (!_cairo_region_not_empty (&clear_region)) { _cairo_region_fini (&clear_region); has_clear_region = FALSE; } } else { status = _cairo_clip_intersect_to_rectangle (clip, &extents); } } if (status) goto out; if (has_trap_region) { cairo_surface_t *clip_surface = clip ? clip->surface : NULL; if ((src->type == CAIRO_PATTERN_TYPE_SOLID || op == CAIRO_OPERATOR_CLEAR) && !clip_surface) { const cairo_color_t *color; if (op == CAIRO_OPERATOR_CLEAR) { color = CAIRO_COLOR_TRANSPARENT; } else { color = &((cairo_solid_pattern_t *)src)->color; } /* Solid rectangles special case */ status = _cairo_surface_fill_region (dst, op, color, &trap_region); if (!status && has_clear_region) status = _cairo_surface_fill_region (dst, CAIRO_OPERATOR_CLEAR, CAIRO_COLOR_TRANSPARENT, &clear_region); goto out; } if ((_cairo_operator_bounded_by_mask (op) && op != CAIRO_OPERATOR_SOURCE) || !clip_surface) { /* For a simple rectangle, we can just use composite(), for more * rectangles, we have to set a clip region. The cost of rasterizing * trapezoids is pretty high for most backends currently, so it's * worthwhile even if a region is needed. * * If we have a clip surface, we set it as the mask; this only works * for bounded operators other than SOURCE; for unbounded operators, * clip and mask cannot be interchanged. For SOURCE, the operator * as implemented by the backends is different in it's handling * of the mask then what we want. * * CAIRO_INT_STATUS_UNSUPPORTED will be returned if the region has * more than rectangle and the destination doesn't support clip * regions. In that case, we fall through. */ status = _composite_trap_region (clip, src, op, dst, &trap_region, &extents); if (status != CAIRO_INT_STATUS_UNSUPPORTED) { if (!status && has_clear_region) status = _cairo_surface_fill_region (dst, CAIRO_OPERATOR_CLEAR, CAIRO_COLOR_TRANSPARENT, &clear_region); goto out; } } } traps_info.traps = traps; traps_info.antialias = antialias; status = _clip_and_composite (clip, op, src, _composite_traps_draw_func, &traps_info, dst, &extents); out: if (has_trap_region) _cairo_region_fini (&trap_region); if (has_clear_region) _cairo_region_fini (&clear_region); return status; } cairo_status_t _cairo_surface_fallback_paint (cairo_surface_t *surface, cairo_operator_t op, cairo_pattern_t *source) { cairo_status_t status; cairo_rectangle_int_t extents; cairo_box_t box; cairo_traps_t traps; status = _cairo_surface_get_extents (surface, &extents); if (status) return status; if (_cairo_operator_bounded_by_source (op)) { cairo_rectangle_int_t source_extents; status = _cairo_pattern_get_extents (source, &source_extents); if (status) return status; if (! _cairo_rectangle_intersect (&extents, &source_extents)) return CAIRO_STATUS_SUCCESS; } status = _cairo_clip_intersect_to_rectangle (surface->clip, &extents); if (status) return status; _cairo_box_from_rectangle (&box, &extents); _cairo_traps_init_box (&traps, &box); status = _clip_and_composite_trapezoids (source, op, surface, &traps, surface->clip, CAIRO_ANTIALIAS_NONE); _cairo_traps_fini (&traps); return status; } static cairo_status_t _cairo_surface_mask_draw_func (void *closure, cairo_operator_t op, cairo_pattern_t *src, cairo_surface_t *dst, int dst_x, int dst_y, const cairo_rectangle_int_t *extents) { cairo_pattern_t *mask = closure; if (src) return _cairo_surface_composite (op, src, mask, dst, extents->x, extents->y, extents->x, extents->y, extents->x - dst_x, extents->y - dst_y, extents->width, extents->height); else return _cairo_surface_composite (op, mask, NULL, dst, extents->x, extents->y, 0, 0, /* unused */ extents->x - dst_x, extents->y - dst_y, extents->width, extents->height); } cairo_status_t _cairo_surface_fallback_mask (cairo_surface_t *surface, cairo_operator_t op, cairo_pattern_t *source, cairo_pattern_t *mask) { cairo_status_t status; cairo_rectangle_int_t extents, source_extents, mask_extents; status = _cairo_surface_get_extents (surface, &extents); if (status) return status; if (_cairo_operator_bounded_by_source (op)) { status = _cairo_pattern_get_extents (source, &source_extents); if (status) return status; if (! _cairo_rectangle_intersect (&extents, &source_extents)) return CAIRO_STATUS_SUCCESS; } if (_cairo_operator_bounded_by_mask (op)) { status = _cairo_pattern_get_extents (mask, &mask_extents); if (status) return status; if (! _cairo_rectangle_intersect (&extents, &mask_extents)) return CAIRO_STATUS_SUCCESS; } status = _cairo_clip_intersect_to_rectangle (surface->clip, &extents); if (status) return status; status = _clip_and_composite (surface->clip, op, source, _cairo_surface_mask_draw_func, mask, surface, &extents); return status; } cairo_status_t _cairo_surface_fallback_stroke (cairo_surface_t *surface, cairo_operator_t op, cairo_pattern_t *source, cairo_path_fixed_t *path, cairo_stroke_style_t *stroke_style, cairo_matrix_t *ctm, cairo_matrix_t *ctm_inverse, double tolerance, cairo_antialias_t antialias) { cairo_status_t status; cairo_traps_t traps; cairo_box_t box; cairo_rectangle_int_t extents; status = _cairo_surface_get_extents (surface, &extents); if (status) return status; if (_cairo_operator_bounded_by_source (op)) { cairo_rectangle_int_t source_extents; status = _cairo_pattern_get_extents (source, &source_extents); if (status) return status; if (! _cairo_rectangle_intersect (&extents, &source_extents)) return CAIRO_STATUS_SUCCESS; } status = _cairo_clip_intersect_to_rectangle (surface->clip, &extents); if (status) return status; if (extents.width == 0 || extents.height == 0) return CAIRO_STATUS_SUCCESS; _cairo_box_from_rectangle (&box, &extents); _cairo_traps_init (&traps); _cairo_traps_limit (&traps, &box); status = _cairo_path_fixed_stroke_to_traps (path, stroke_style, ctm, ctm_inverse, tolerance, &traps); if (status) goto FAIL; status = _clip_and_composite_trapezoids (source, op, surface, &traps, surface->clip, antialias); FAIL: _cairo_traps_fini (&traps); return status; } cairo_status_t _cairo_surface_fallback_fill (cairo_surface_t *surface, cairo_operator_t op, cairo_pattern_t *source, cairo_path_fixed_t *path, cairo_fill_rule_t fill_rule, double tolerance, cairo_antialias_t antialias) { cairo_status_t status; cairo_traps_t traps; cairo_box_t box; cairo_rectangle_int_t extents; status = _cairo_surface_get_extents (surface, &extents); if (status) return status; if (_cairo_operator_bounded_by_source (op)) { cairo_rectangle_int_t source_extents; status = _cairo_pattern_get_extents (source, &source_extents); if (status) return status; if (! _cairo_rectangle_intersect (&extents, &source_extents)) return CAIRO_STATUS_SUCCESS; } status = _cairo_clip_intersect_to_rectangle (surface->clip, &extents); if (status) return status; if (extents.width == 0 || extents.height == 0) return CAIRO_STATUS_SUCCESS; _cairo_box_from_rectangle (&box, &extents); _cairo_traps_init (&traps); _cairo_traps_limit (&traps, &box); status = _cairo_path_fixed_fill_to_traps (path, fill_rule, tolerance, &traps); if (status) { _cairo_traps_fini (&traps); return status; } status = _clip_and_composite_trapezoids (source, op, surface, &traps, surface->clip, antialias); _cairo_traps_fini (&traps); return status; } typedef struct { cairo_scaled_font_t *font; cairo_glyph_t *glyphs; int num_glyphs; } cairo_show_glyphs_info_t; static cairo_status_t _cairo_surface_old_show_glyphs_draw_func (void *closure, cairo_operator_t op, cairo_pattern_t *src, cairo_surface_t *dst, int dst_x, int dst_y, const cairo_rectangle_int_t *extents) { cairo_show_glyphs_info_t *glyph_info = closure; cairo_solid_pattern_t pattern; cairo_status_t status; /* Modifying the glyph array is fine because we know that this function * will be called only once, and we've already made a copy of the * glyphs in the wrapper. */ if (dst_x != 0 || dst_y != 0) { int i; for (i = 0; i < glyph_info->num_glyphs; ++i) { ((cairo_glyph_t *) glyph_info->glyphs)[i].x -= dst_x; ((cairo_glyph_t *) glyph_info->glyphs)[i].y -= dst_y; } } _cairo_pattern_init_solid (&pattern, CAIRO_COLOR_WHITE, CAIRO_CONTENT_COLOR); if (!src) src = &pattern.base; status = _cairo_surface_old_show_glyphs (glyph_info->font, op, src, dst, extents->x, extents->y, extents->x - dst_x, extents->y - dst_y, extents->width, extents->height, glyph_info->glyphs, glyph_info->num_glyphs); if (status != CAIRO_INT_STATUS_UNSUPPORTED) return status; status = _cairo_scaled_font_show_glyphs (glyph_info->font, op, src, dst, extents->x, extents->y, extents->x - dst_x, extents->y - dst_y, extents->width, extents->height, glyph_info->glyphs, glyph_info->num_glyphs); if (src == &pattern.base) _cairo_pattern_fini (&pattern.base); return status; } cairo_status_t _cairo_surface_fallback_show_glyphs (cairo_surface_t *surface, cairo_operator_t op, cairo_pattern_t *source, cairo_glyph_t *glyphs, int num_glyphs, cairo_scaled_font_t *scaled_font) { cairo_status_t status; cairo_rectangle_int_t extents; cairo_show_glyphs_info_t glyph_info; status = _cairo_surface_get_extents (surface, &extents); if (status) return status; if (_cairo_operator_bounded_by_mask (op)) { cairo_rectangle_int_t glyph_extents; status = _cairo_scaled_font_glyph_device_extents (scaled_font, glyphs, num_glyphs, &glyph_extents); if (status) return status; if (! _cairo_rectangle_intersect (&extents, &glyph_extents)) return CAIRO_STATUS_SUCCESS; } status = _cairo_clip_intersect_to_rectangle (surface->clip, &extents); if (status) return status; glyph_info.font = scaled_font; glyph_info.glyphs = glyphs; glyph_info.num_glyphs = num_glyphs; status = _clip_and_composite (surface->clip, op, source, _cairo_surface_old_show_glyphs_draw_func, &glyph_info, surface, &extents); return status; } cairo_surface_t * _cairo_surface_fallback_snapshot (cairo_surface_t *surface) { cairo_surface_t *snapshot; cairo_status_t status; cairo_surface_pattern_t pattern; cairo_image_surface_t *image; void *image_extra; status = _cairo_surface_acquire_source_image (surface, &image, &image_extra); if (status) return _cairo_surface_create_in_error (status); snapshot = cairo_image_surface_create (image->format, image->width, image->height); if (cairo_surface_status (snapshot)) { _cairo_surface_release_source_image (surface, image, image_extra); return snapshot; } _cairo_pattern_init_for_surface (&pattern, &image->base); status = _cairo_surface_composite (CAIRO_OPERATOR_SOURCE, &pattern.base, NULL, snapshot, 0, 0, 0, 0, 0, 0, image->width, image->height); _cairo_pattern_fini (&pattern.base); _cairo_surface_release_source_image (surface, image, image_extra); if (status) { cairo_surface_destroy (snapshot); return _cairo_surface_create_in_error (status); } snapshot->device_transform = surface->device_transform; snapshot->device_transform_inverse = surface->device_transform_inverse; snapshot->is_snapshot = TRUE; return snapshot; } cairo_status_t _cairo_surface_fallback_composite (cairo_operator_t op, cairo_pattern_t *src, cairo_pattern_t *mask, cairo_surface_t *dst, int src_x, int src_y, int mask_x, int mask_y, int dst_x, int dst_y, unsigned int width, unsigned int height) { fallback_state_t state; cairo_status_t status; status = _fallback_init (&state, dst, dst_x, dst_y, width, height); if (status) { if (status == CAIRO_INT_STATUS_NOTHING_TO_DO) return CAIRO_STATUS_SUCCESS; return status; } /* We know this will never fail with the image backend; but * instead of calling into it directly, we call * _cairo_surface_composite so that we get the correct device * offset handling. */ status = _cairo_surface_composite (op, src, mask, &state.image->base, src_x, src_y, mask_x, mask_y, dst_x - state.image_rect.x, dst_y - state.image_rect.y, width, height); _fallback_fini (&state); return status; } cairo_status_t _cairo_surface_fallback_fill_rectangles (cairo_surface_t *surface, cairo_operator_t op, const cairo_color_t *color, cairo_rectangle_int_t *rects, int num_rects) { fallback_state_t state; cairo_rectangle_int_t *offset_rects = NULL; cairo_status_t status; int x1, y1, x2, y2; int i; assert (! surface->is_snapshot); if (num_rects <= 0) return CAIRO_STATUS_SUCCESS; /* Compute the bounds of the rectangles, so that we know what area of the * destination surface to fetch */ x1 = rects[0].x; y1 = rects[0].y; x2 = rects[0].x + rects[0].width; y2 = rects[0].y + rects[0].height; for (i = 1; i < num_rects; i++) { if (rects[i].x < x1) x1 = rects[i].x; if (rects[i].y < y1) y1 = rects[i].y; if ((int) (rects[i].x + rects[i].width) > x2) x2 = rects[i].x + rects[i].width; if ((int) (rects[i].y + rects[i].height) > y2) y2 = rects[i].y + rects[i].height; } status = _fallback_init (&state, surface, x1, y1, x2 - x1, y2 - y1); if (status) { if (status == CAIRO_INT_STATUS_NOTHING_TO_DO) return CAIRO_STATUS_SUCCESS; return status; } /* If the fetched image isn't at 0,0, we need to offset the rectangles */ if (state.image_rect.x != 0 || state.image_rect.y != 0) { offset_rects = _cairo_malloc_ab (num_rects, sizeof (cairo_rectangle_int_t)); if (offset_rects == NULL) { status = _cairo_error (CAIRO_STATUS_NO_MEMORY); goto DONE; } for (i = 0; i < num_rects; i++) { offset_rects[i].x = rects[i].x - state.image_rect.x; offset_rects[i].y = rects[i].y - state.image_rect.y; offset_rects[i].width = rects[i].width; offset_rects[i].height = rects[i].height; } rects = offset_rects; } status = _cairo_surface_fill_rectangles (&state.image->base, op, color, rects, num_rects); free (offset_rects); DONE: _fallback_fini (&state); return status; } cairo_status_t _cairo_surface_fallback_composite_trapezoids (cairo_operator_t op, cairo_pattern_t *pattern, cairo_surface_t *dst, cairo_antialias_t antialias, int src_x, int src_y, int dst_x, int dst_y, unsigned int width, unsigned int height, cairo_trapezoid_t *traps, int num_traps) { fallback_state_t state; cairo_trapezoid_t *offset_traps = NULL; cairo_status_t status; status = _fallback_init (&state, dst, dst_x, dst_y, width, height); if (status) { if (status == CAIRO_INT_STATUS_NOTHING_TO_DO) return CAIRO_STATUS_SUCCESS; return status; } /* If the destination image isn't at 0,0, we need to offset the trapezoids */ if (state.image_rect.x != 0 || state.image_rect.y != 0) { offset_traps = _cairo_malloc_ab (num_traps, sizeof (cairo_trapezoid_t)); if (!offset_traps) { status = _cairo_error (CAIRO_STATUS_NO_MEMORY); goto DONE; } _cairo_trapezoid_array_translate_and_scale (offset_traps, traps, num_traps, - state.image_rect.x, - state.image_rect.y, 1.0, 1.0); traps = offset_traps; } status = _cairo_surface_composite_trapezoids (op, pattern, &state.image->base, antialias, src_x, src_y, dst_x - state.image_rect.x, dst_y - state.image_rect.y, width, height, traps, num_traps); if (offset_traps) free (offset_traps); DONE: _fallback_fini (&state); return status; } cairo_status_t _cairo_surface_fallback_clone_similar (cairo_surface_t *surface, cairo_surface_t *src, int src_x, int src_y, int width, int height, int *clone_offset_x, int *clone_offset_y, cairo_surface_t **clone_out) { cairo_status_t status; cairo_surface_t *new_surface = NULL; cairo_t *cr; new_surface = _cairo_surface_create_similar_scratch (surface, cairo_surface_get_content (src), width, height); if (new_surface->status) return new_surface->status; /* We have to copy these here, so that the coordinate spaces are correct */ new_surface->device_transform = src->device_transform; new_surface->device_transform_inverse = src->device_transform_inverse; /* We can't use _cairo_composite directly, because backends that * implement the "high-level" API may not have it implemented. * (For example, SVG.) We can fix this by either checking if the * destination supports composite first, or we can make clone a * required "high-level" operation. */ cr = cairo_create (new_surface); cairo_set_operator (cr, CAIRO_OPERATOR_SOURCE); cairo_set_source_surface (cr, src, -src_x, -src_y); cairo_paint (cr); status = cairo_status (cr); cairo_destroy (cr); if (status == CAIRO_STATUS_SUCCESS) { *clone_offset_x = src_x; *clone_offset_y = src_y; *clone_out = new_surface; } else cairo_surface_destroy (new_surface); return status; }