From cdebec5e40bd0af82da0659f37af85ee2aa2c9d1 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 6 Oct 2014 16:49:57 +0200 Subject: linuxboot: compute initrd loading address Even though hw/i386/pc.c tries to compute a valid loading address for the initrd, close to the top of RAM, this does not take into account other data that is malloced into that memory by SeaBIOS. Luckily we can easily look at the memory map to find out how much memory is used up there. This patch places the initrd in the first four gigabytes, below the first hole (as returned by INT 15h, AX=e801h). Without this patch: [ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff] [ 0.000000] RAMDISK: [mem 0x0710a000-0x07fd7fff] With this patch: [ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff] [ 0.000000] RAMDISK: [mem 0x07112000-0x07fdffff] So linuxboot is able to use the 64k that were added as padding for QEMU <= 2.1. Acked-by: Michael S. Tsirkin Signed-off-by: Paolo Bonzini --- pc-bios/linuxboot.bin | Bin 1024 -> 1024 bytes pc-bios/optionrom/linuxboot.S | 47 ++++++++++++++++++++++++++++++++++++++---- pc-bios/optionrom/optionrom.h | 21 ++++++++++++++++--- 3 files changed, 61 insertions(+), 7 deletions(-) (limited to 'pc-bios') diff --git a/pc-bios/linuxboot.bin b/pc-bios/linuxboot.bin index e7c36694f9..130103fb73 100644 Binary files a/pc-bios/linuxboot.bin and b/pc-bios/linuxboot.bin differ diff --git a/pc-bios/optionrom/linuxboot.S b/pc-bios/optionrom/linuxboot.S index 748c831160..5bc0af08e0 100644 --- a/pc-bios/optionrom/linuxboot.S +++ b/pc-bios/optionrom/linuxboot.S @@ -76,14 +76,45 @@ boot_kernel: copy_kernel: + /* Compute initrd address */ + mov $0xe801, %ax + xor %cx, %cx + xor %dx, %dx + int $0x15 + + /* Output could be in AX/BX or CX/DX */ + or %cx, %cx + jnz 1f + or %dx, %dx + jnz 1f + mov %ax, %cx + mov %bx, %dx +1: + + or %dx, %dx + jnz 2f + addw $1024, %cx /* add 1 MB */ + movzwl %cx, %edi + shll $10, %edi /* convert to bytes */ + jmp 3f + +2: + addw $16777216 >> 16, %dx /* add 16 MB */ + movzwl %dx, %edi + shll $16, %edi /* convert to bytes */ + +3: + read_fw FW_CFG_INITRD_SIZE + subl %eax, %edi + andl $-4096, %edi /* EDI = start of initrd */ /* We need to load the kernel into memory we can't access in 16 bit mode, so let's get into 32 bit mode, write the kernel and jump back again. */ /* Reserve space on the stack for our GDT descriptor. */ - mov %esp, %ebp - sub $16, %esp + mov %esp, %ebp + sub $16, %esp /* Now create the GDT descriptor */ movw $((3 * 8) - 1), -16(%bp) @@ -108,10 +139,18 @@ copy_kernel: /* We're now running in 16-bit CS, but 32-bit ES! */ /* Load kernel and initrd */ + pushl %edi + read_fw_blob_addr32_edi(FW_CFG_INITRD) read_fw_blob_addr32(FW_CFG_KERNEL) - read_fw_blob_addr32(FW_CFG_INITRD) read_fw_blob_addr32(FW_CFG_CMDLINE) - read_fw_blob_addr32(FW_CFG_SETUP) + + read_fw FW_CFG_SETUP_ADDR + mov %eax, %edi + mov %eax, %ebx + read_fw_blob_addr32_edi(FW_CFG_SETUP) + + /* Update the header with the initrd address we chose above */ + popl %es:0x218(%ebx) /* And now jump into Linux! */ mov $0, %eax diff --git a/pc-bios/optionrom/optionrom.h b/pc-bios/optionrom/optionrom.h index ce436085d9..f1a9021ec1 100644 --- a/pc-bios/optionrom/optionrom.h +++ b/pc-bios/optionrom/optionrom.h @@ -51,8 +51,6 @@ .endm #define read_fw_blob_pre(var) \ - read_fw var ## _ADDR; \ - mov %eax, %edi; \ read_fw var ## _SIZE; \ mov %eax, %ecx; \ mov $var ## _DATA, %ax; \ @@ -68,6 +66,8 @@ * Clobbers: %eax, %edx, %es, %ecx, %edi */ #define read_fw_blob(var) \ + read_fw var ## _ADDR; \ + mov %eax, %edi; \ read_fw_blob_pre(var); \ /* old as(1) doesn't like this insn so emit the bytes instead: \ rep insb (%dx), %es:(%edi); \ @@ -80,7 +80,22 @@ * * Clobbers: %eax, %edx, %es, %ecx, %edi */ -#define read_fw_blob_addr32(var) \ +#define read_fw_blob_addr32(var) \ + read_fw var ## _ADDR; \ + mov %eax, %edi; \ + read_fw_blob_pre(var); \ + /* old as(1) doesn't like this insn so emit the bytes instead: \ + addr32 rep insb (%dx), %es:(%edi); \ + */ \ + .dc.b 0x67,0xf3,0x6c + +/* + * Read a blob from the fw_cfg device in forced addr32 mode, address is in %edi. + * Requires _SIZE and _DATA values for the parameter. + * + * Clobbers: %eax, %edx, %edi, %es, %ecx + */ +#define read_fw_blob_addr32_edi(var) \ read_fw_blob_pre(var); \ /* old as(1) doesn't like this insn so emit the bytes instead: \ addr32 rep insb (%dx), %es:(%edi); \ -- cgit v1.2.3