summaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)AuthorFilesLines
2011-04-07exit if -drive specified is invalid instead of ignoring the "wrong" -driveMichael Tokarev1-1/+3
This fixes the problem when qemu continues even if -drive specification is somehow invalid, resulting in a mess. Applicable for both current master and for stable-0.14 (and the same issue exist 0.13 and 0.12 too). The prob can actually be seriuos: when you start guest with two drives and make an error in the specification of one of them, and the guest has something like a raid array on the two drives, guest may start failing that array or kick "missing" drives which may result in a mess - this is what actually happened to me, I did't want a resync at all, and a resync resulted in re-writing (and allocating) a 4TB virtual drive I used for testing, which in turn resulted in my filesystem filling up and whole thing failing badly. Yes it was just testing VM, I experimented with larger raid arrays, but the end result was quite, well, unexpected. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-04virtio: use generic name when possibleAlexander Graf1-3/+3
We have two different virtio buses: pci and s390. The abstraction path taken in qemu is to have generic aliases for each device type in the architecture specific qdev devices. So let's make use of these aliases whenever we can and define them whenever we can. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04register signal handler after initializing SDL.Gleb Natapov1-3/+3
SDL library initialization mangles signal handlers, so QEMU should register them after initializing SDL. This was the case before and code even have a comment about that. Fix it to be so again. Signed-off-by: Gleb Natapov <gleb@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04vl.c: Tidy up message printed when we exit on a signalPeter Maydell1-2/+9
Tidy up the message printed when qemu exits due to a signal, so that it's clearer where the message is coming from and that it's not just stray debug output. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-29extract I/O handler lists to iohandler.cPaolo Bonzini1-101/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-26report that QEMU process was killed by a signalGleb Natapov1-1/+19
Currently when rogue script kills QEMU process (using TERM/INT/HUP signal) it looks indistinguishable from system shutdown. Lets report that QEMU was killed and leave some clues about the killer identity. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-25vl.c: Fix compilation failure if CONFIG_SDL isn't definedPeter Maydell1-6/+7
Fix a compilation failure if CONFIG_SDL isn't defined (gcc complained that the label 'invalid_display' wasn't used). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-22Make VNC support optionalJes Sorensen1-4/+22
Per default VNC is enabled. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-22error message if user specifies curses on cmd line when curses is disabledJes Sorensen1-2/+5
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-22error message if user specifies SDL cmd line option when SDL is disabledJes Sorensen1-0/+8
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-22Add support for -display vncJes Sorensen1-0/+14
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-22Introduce -display noneJes Sorensen1-0/+2
New option -display none. This option differs from -nographic by not trying to take control of stdio etc. but instead behaves as if a graphics display is enabled, except that it doesn't show one. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-22Introduce -display argumentJes Sorensen1-0/+75
This patch introduces a -display argument which consolidates the setting of the display mode. Valid options are: sdl/curses/default Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-21Merge remote branch 'qemu-kvm/uq/master' into stagingAnthony Liguori1-0/+1
2011-03-21change all rt_clock references to use millisecond resolution accessorsPaolo Bonzini1-6/+6
This was done with: sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \ $(git grep -l 'get_clock\>.*rt_clock' ) sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \ $(git grep -l 'new_timer\>.*rt_clock' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-15simpletrace: Move st_init() error reportingStefan Hajnoczi1-1/+3
User emulator builds do not have error_report() so it should not be used by simpletrace.c. In fact, error reporting inside simpletrace.c is inappropriate and should be done by the caller instead. This patch moves st_init() error reporting out to its caller, vl.c:main(). Reported-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-15Synchronize VCPU states before resetJan Kiszka1-0/+1
This is required to support keeping VCPU states across a system reset. If we do not read the current state before the reset, cpu_synchronize_all_post_reset may write back incorrect state information. The first user of this will be MCE MSR synchronization which currently works around the missing cpu_synchronize_all_states. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-07simpletrace: Thread-safe tracingStefan Hajnoczi1-12/+4
Trace events outside the global mutex cannot be used with the simple trace backend since it is not thread-safe. There is no check to prevent them being enabled so people sometimes learn this the hard way. This patch restructures the simple trace backend with a ring buffer suitable for multiple concurrent writers. A writeout thread empties the trace buffer when threshold fill levels are reached. Should the writeout thread be unable to keep up with trace generation, records will simply be dropped. Each time events are dropped a special record is written to the trace file indicating how many events were dropped. The event ID is 0xfffffffffffffffe and its signature is dropped(uint32_t count). Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-02-14Move debug exception handling out of cpu_execJan Kiszka1-1/+1
To prepare splitting up KVM and TCG CPU entry/exit, move the debug exception into cpus.c and invoke cpu_handle_debug_exception on return from qemu_cpu_exec. This also allows to clean up the debug request signaling: We can assign the job of informing main-loop to qemu_system_debug_request and stop the calling cpu directly in cpu_handle_debug_exception. That means a debug stop will now only be signaled via debug_requested and not additionally via vmstop_requested. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14Refactor debug and vmstop request interfaceJan Kiszka1-4/+16
Instead of fiddling with debug_requested and vmstop_requested directly, introduce qemu_system_debug_request and turn qemu_system_vmstop_request into a public interface. This aligns those services with exiting ones in vl.c. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14Improve vm_stop reason declarationsJan Kiszka1-1/+1
Define and use dedicated constants for vm_stop reasons, they actually have nothing to do with the EXCP_* defines used so far. At this chance, specify more detailed reasons so that VM state change handlers can evaluate them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14Flatten the main loopJan Kiszka1-15/+15
First of all, vm_can_run is a misnomer, it actually means "no request pending". Moreover, there is no need to check all pending requests twice, the first time via the inner loop check and then again when actually processing the requests. We can simply remove the inner loop and do the checks directly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14Leave inner main_loop faster on pending requestsJan Kiszka1-4/+7
If there is any pending request that requires us to leave the inner loop if main_loop, makes sure we do this as soon as possible by enforcing non-blocking IO processing. At this change, move variable definitions out of the inner loop to improve readability. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14Process vmstop requests in IO threadJan Kiszka1-9/+5
A pending vmstop request is also a reason to leave the inner main loop. So far we ignored it, and pending stop requests issued over VCPU threads were simply ignored. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14Stop current VCPU on synchronous reset requestsJan Kiszka1-0/+1
If some I/O operation ends up calling qemu_system_reset_request in VCPU context, we record this and inform the io-thread, but we do not terminate the VCPU loop. This can lead to fairly unexpected behavior if the triggering reset operation is supposed to work synchronously. Fix this for TCG (when run in deterministic I/O mode) by setting the VCPU on stop and issuing a cpu_exit. KVM requires some more work on its VCPU loop. [ ported from qemu-kvm ] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-04do not pass NULL to strdup.Gleb Natapov1-2/+2
Also use qemu_strdup() instead of strdup() in bootindex code. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-01Merge remote branch 'qemu-kvm/uq/master' into stagingAnthony Liguori1-1/+1
aliguori: fix build with !defined(KVM_CAP_ASYNC_PF) Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-01-31blockdev: Fix drive_add for drives without mediaMarkus Armbruster1-7/+2
Watch this: (qemu) drive_add 0 if=none (qemu) info block none0: type=hd removable=0 [not inserted] (qemu) drive_del none0 Segmentation fault (core dumped) add_init_drive() is confused about drive_init()'s failure modes, and cleans up when it shouldn't. This leaves the DriveInfo with member opts dangling. drive_del attempts to free it, and dies. drive_init() behaves as follows: * If it created a drive with media, it returns its DriveInfo. * If it created a drive without media, it clears *fatal_error and returns NULL. * If it couldn't create a drive, it sets *fatal_error and returns NULL. Of its three callers: * drive_init_func() is correct. * usb_msd_init() assumes drive_init() failed when it returns NULL. This is correct only because it always passes option "file", and "drive without media" can't happen then. * add_init_drive() assumes drive_init() failed when it returns NULL. This is incorrect. Clean up drive_init() to return NULL on failure and only on failure. Drop its parameter fatal_error. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31blockdev: Replace drive_add()'s fmt, ... by optstr parameterMarkus Armbruster1-10/+13
Let the callers build the optstr. Only one wants to. All the others become simpler, because they don't have to worry about escaping '%'. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31blockdev: Reject multiple definitions for the same driveMarkus Armbruster1-15/+30
We silently ignore multiple definitions for the same drive: $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=ide,index=1,file=tmp.qcow2 -drive if=ide,index=1,file=nonexistant QEMU 0.13.50 monitor - type 'help' for more information (qemu) info block ide0-hd1: type=hd removable=0 file=tmp.qcow2 backing_file=tmp.img ro=0 drv=qcow2 encrypted=0 With if=none, this can become quite confusing: $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=none,index=1,file=tmp.qcow2,id=eins -drive if=none,index=1,file=nonexistant,id=zwei -device ide-drive,drive=eins -device ide-drive,drive=zwei qemu-system-x86_64: -device ide-drive,drive=zwei: Property 'ide-drive.drive' can't find value 'zwei' The second -device fails, because it refers to drive zwei, which got silently ignored. Make multiple drive definitions fail cleanly. Unfortunately, there's code that relies on multiple drive definitions being silently ignored: main() merrily adds default drives even when the user already defined these drives. Fix that up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31blockdev: Make drive_add() take explicit type, index parametersMarkus Armbruster1-20/+23
Before, type & index were hidden in printf-like fmt, ... parameters, which get expanded into an option string. Rather inconvenient for uses later in this series. New IF_DEFAULT to ask for the machine's default interface. Before, that was done by having no option "if" in the option string. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24Make strtosz() return int64_t instead of ssize_tJes Sorensen1-2/+2
strtosz() needs to return a 64 bit type even on 32 bit architectures. Otherwise qemu-img will fail to create disk images >= 2GB Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-23kvm: Drop smp_cpus argument from init functionsJan Kiszka1-1/+1
No longer used. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-10Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori1-1/+3
2010-12-27Merge branch 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemuAurelien Jarno1-1/+3
* 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu: vnc/spice: add set_passwd monitor command. vnc: support password expire vnc: auth reject cleanup spice: add qmp 'query-spice' and hmp 'info spice' commands. spice: connection events. spice: add qxl device spice: add qxl vgabios binary.
2010-12-27Fix a missing trailing newlineAurelien Jarno1-1/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-20qbus: register reset handler for qbus whose parent is NULLIsaku Yamahata1-1/+3
Stefan Weil reported the regression caused by ec990eb622ad46df5ddcb1e94c418c271894d416 as follows > The second regression also occurs with MIPS malta. > Networking no longer works with the default pcnet nic. > > This is caused because the reset function for pcnet is no > longer called during system boot. The result in an invalid > mac address (all zero) and a non-working nic. > > For this second regression I still have no simple solution. > Of course mips_malta.c should be converted to qdev which > would fix both problems (but only for malta system emulation). The issue is, it is assumed that all qbuses, qdeves are under main_system_bus. But there are qbuses whose parent is NULL. So it is necessary to trigger reset for those qbuses. (On the other hand, if NULL is passed to qdev_create(), its parent bus is main_system_bus.) Ideally those buses should be moved under bus controller device which is qdev. But it's not done yet. So register qbus reset handler for qbus whose parent is NULL. Reported-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-19Avoid a warning from OpenBSD linkerBlue Swirl1-2/+4
Avoid the warning below by using snprintf: ../libhw64/vl.o(.text+0x78d4): In function `get_boot_devices_list': /src/qemu/vl.c:763: warning: sprintf() is often misused, please use snprintf() Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Pass boot device list to firmware.Gleb Natapov1-0/+48
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add notifier that will be called when machine is fully created.Gleb Natapov1-0/+15
Action that depends on fully initialized device model should register with this notifier chain. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add bootindex for option roms.Gleb Natapov1-2/+9
Extend -option-rom command to have additional parameter ,bootindex=. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add bootindex parameter to net/block/fd deviceGleb Natapov1-0/+40
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-09spice: add qxl deviceGerd Hoffmann1-1/+3
qxl is a paravirtual graphics card. The qxl device is the bridge between the guest and the spice server (aka libspice-server). The spice server will send the rendering commands to the spice client, which will actually render them. The spice server is also able to render locally, which is done in case the guest wants read something from video memory. Local rendering is also used to support display over vnc and sdl. qxl is activated using "-vga qxl". qxl supports multihead, additional cards can be added via '-device qxl". [ v2: add copyright to files ] [ v2: use qemu-common.h for standard includes ] [ v2: create separate qxl-vga device for primary ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-01Merge remote branch 'origin/master' into pciMichael S. Tsirkin1-7/+11
Conflicts: Makefile.objs hw/virtio.c
2010-11-22qdev: reset qdev along with qdev treeAnthony Liguori1-0/+1
This patch changes the reset handling so that qdev has no knowledge of the global system reset. Instead, a new bus/device level function is introduced that allows all devices/buses on the bus/device to be reset using a depth first transversal. N.B. we have to expose the implicit system bus because we have various hacks that result in an implicit system bus existing. Instead, we ought to have an explicitly created system bus that we can trigger reset from. That's a topic for a future patch though. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-21trace: Trace vm_start()/vm_stop()Stefan Hajnoczi1-0/+3
VM state change notifications are invoked from vm_start()/vm_stop(). Trace these state changes so we can reason about the state of the VM from trace output. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16Delete IOHandlers after potentially running themStefan Hajnoczi1-7/+8
Since commit 4bed9837309e58d208183f81d8344996744292cf an .fd_read() handler that deletes its IOHandler is exposed to .fd_write() being called on the deleted IOHandler. This patch fixes deletion so that .fd_read() and .fd_write() are never called on an IOHandler that is marked for deletion. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-03Introduce strtosz() library function to convert a string to a byte count.Jes Sorensen1-20/+9
strtosz() returns -1 on error. It now supports human unit formats in eg. 1.0G, with better error handling. The following suffixes are supported: B/b = bytes K/k = KB M/m = MB G/g = GB T/t = TB This patch changes -numa and -m input to use strtosz(). Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-23qemu-timer: move commonly used timer code to qemu-timer-commonBlue Swirl1-24/+0
Move timer init functions to a new file, qemu-timer-common.c. Make other critical timer functions inlined to preserve performance in qemu-timer.c, also move muldiv64() (used by the inline functions) to qemu-timer.h. Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly. Remove a similar/duplicate definition in qemu-tool.c. Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used there. After this change, tracing can be used also for user code and simpletrace on Win32. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-05Merge remote branch 'spice/submit.6' into stagingAnthony Liguori1-16/+34
Conflicts: configure Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 00:29:47 +0000