summaryrefslogtreecommitdiff
path: root/monitor.c
AgeCommit message (Collapse)AuthorFilesLines
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-0/+1
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Finally unused, clean upMarkus Armbruster1-13/+0
Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qmp: Wean off qerror_report()Markus Armbruster1-18/+6
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-33/+33
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster1-1/+1
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite1-1/+1
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Split mon_get_cpu fn to remove ENV_GET_CPUPeter Crosthwaite1-36/+29
The monitor currently has one helper, mon_get_cpu() which will return an env pointer. The target specific users of this API want an env, but all the target agnostic users really just want the cpu pointer. These users then need to use the target-specifically defined ENV_GET_CPU to navigate back up to the CPU from the ENV. Split the API for the two uses cases to remove all need for ENV_GET_CPU. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Fix failure path for "S" argumentBandan Das1-1/+1
Since the "S" argument type is only used with the "?" flag, the bug can't bite. Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Point to "help" command on syntax errorBandan Das1-0/+2
When a command fails due to incorrect syntax or input, suggest using the "help" command to get more information about the command. This is only applicable for HMP. Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: cleanup parsing of cmd name and cmd argumentsBandan Das1-40/+56
There's too much going on in monitor_parse_command(). Split up the arguments parsing bits into a separate function monitor_parse_arguments(). Let the original function check for command validity and sub-commands if any and return data (*cmd) that the newly introduced function can process and return a QDict. Also, pass a pointer to the cmdline to track current parser location. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: remove debug printsBandan Das1-19/+1
The preferred solution is to use tracepoints and there is good chance of bitrot with the debug prints not being enabled at compile time. Remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' inside qdictEric Blake1-1/+1
Now that qbool is fixed, let's fix getting and setting a bool value to a qdict member to also use C99 bool rather than int. I audited all callers to ensure that the changed return type will not cause any changed semantics. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake1-5/+5
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-15audio: remove LOG_TO_MONITOR along with default_monKővágó, Zoltán1-4/+0
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log to the monitor before it's being initialized), and also nothing else in qemu logs to the monitor. This log to monitor feature was the last thing that used the default_mon variable, so I removed it too (as using it can cause problems). Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12qmp/hmp: add rocker device supportScott Feldman1-0/+28
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-08monitor: Fix QMP ABI breakage around "id"Markus Armbruster1-0/+2
Commit 65207c5 accidentally dropped a line of code we need along with a comment that became wrong then. This made QMP reject "id": {"execute": "system_reset", "id": "1"} {"error": {"class": "GenericError", "desc": "QMP input object member 'id' is unexpected"}} Put the lost line right back, so QMP again accepts and returns "id", as promised by the ABI: {"execute": "system_reset", "id": "1"} {"return": {}, "id": "1"} Reported-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1433753070-12632-2-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02monitor: Change return type of monitor_cur_is_qmp() to boolMarkus Armbruster1-2/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Rename monitor_ctrl_mode() to monitor_is_qmp()Markus Armbruster1-6/+8
... and change return type to bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Turn int command_mode into bool in_command_modeMarkus Armbruster1-11/+12
While there, inline the pointless qmp_cmd_mode() wrapper. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Drop do_qmp_capabilities()'s superfluous QMP checkMarkus Armbruster1-5/+1
Superfluous since commit 30f5041 removed it from HMP. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Unbox Monitor member mc and rename to qmpMarkus Armbruster1-18/+15
While there, rename its type as well, from MonitorControl to MonitorQMP. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Rename monitor_control_read(), monitor_control_event()Markus Armbruster1-10/+4
... to monitor_qmp_read(), monitor_qmp_event(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Rename handle_user_command() to handle_hmp_command()Markus Armbruster1-5/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Limit QError use to command handlersMarkus Armbruster1-13/+14
The previous commits narrowed use of QError to handle_qmp_command() and its helpers monitor_protocol_emitter(), build_qmp_error_dict(). Narrow it further to just the command handler call: instead of converting Error to QError throughout handle_qmp_command(), convert the QError gotten from the command handler to Error, and switch the helpers from QError to Error. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Inline monitor_has_error() into its only callerMarkus Armbruster1-6/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Wean monitor_protocol_emitter() off mon->errorMarkus Armbruster1-6/+7
Move mon->error handling to its caller handle_qmp_command(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Propagate errors through invalid_qmp_mode()Markus Armbruster1-8/+10
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Propagate errors through qmp_check_input_obj()Markus Armbruster1-9/+10
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Propagate errors through qmp_check_client_args()Markus Armbruster1-32/+33
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Drop unused "new" HMP command interfaceMarkus Armbruster1-21/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Use traditional command interface for HMP device_addMarkus Armbruster1-2/+0
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For device_add, that's easy: just wrap the obvious hmp_device_add() around do_device_add(). monitor_user_noop() is now unused, drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Convert client_migrate_info to QAPIMarkus Armbruster1-24/+18
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Improve and document client_migrate_info protocol errorMarkus Armbruster1-1/+1
Protocol must be spice, vnc isn't implemented. Fix up documentation. Attempts to use vnc or any other unknown protocol yield the misleading error message "Invalid parameter 'protocol'". Improve it to "Parameter 'protocol' expects spice". Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by. Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Clean up after previous commitMarkus Armbruster1-29/+11
Inline qmp_call_cmd() along with its helper handler_audit() into its only caller handle_qmp_command(), and simplify the result. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Drop broken, unused asynchronous command interfaceMarkus Armbruster1-68/+2
The asynchronous monitor command interface goes back to commit 940cc30 (Jan 2010). Added a third case to command execution. The hope back then according to the commit message was that all commands get converted to the asynchronous interface, killing off the other two cases. Didn't happen. The initial asynchronous commands balloon and info balloon were converted back to synchronous long ago (commit 96637bc and d72f32), with commit messages calling the asynchronous interface "not fully working" and "deprecated". The only other user went away in commit 3b5704b. New code generally uses synchronous commands and asynchronous events. What exactly is still "not fully working" with asynchronous commands? Well, here's a bug that defeats actual asynchronous use pretty reliably: the reply's ID is wrong (and has always been wrong) unless you use the command synchronously! To reproduce, we need an asynchronous command, so we have to go back before commit 3b5704b. Run QEMU with spice: $ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio {"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}} Connect a spice client in another terminal: $ remote-viewer spice://localhost:5900 Set up a migration destination dummy in a third terminal: $ socat TCP-LISTEN:12345 STDIO Now paste the following into the QMP monitor: { "execute": "qmp_capabilities", "id": "i0" } { "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } } { "execute": "query-kvm", "id": "i2" } Produces two replies immediately, one to qmp_capabilities, and one to query-kvm: {"return": {}, "id": "i0"} {"return": {"enabled": false, "present": true}, "id": "i2"} Both are correct. Two lines of debug output from libspice-server not shown. Now EOF socat's standard input to make it close the connection. This makes the asynchronous client_migrate_info complete. It replies: {"return": {}} Bug: "id": "i1" is missing. Two lines of debug output from libspice-server not shown. Cherry on top: storage for the missing ID is leaked. Get rid of this stuff before somebody hurts himself with it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-11Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-11/+14
pc, virtio enhancements Memory hot-unplug support for pc, MSI-X mapping update speedup for virtio-pci, misc refactorings and bugfixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (28 commits) acpi: update expected files for memory unplug virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net pci: Merge pci_nic_init() into pci_nic_init_nofail() acpi: add a missing backslash to the \_SB scope. qmp-event: add event notification for memory hot unplug error acpi: add hardware implementation for memory hot unplug acpi: fix "Memory device control fields" register acpi: extend aml_field() to support UpdateRule acpi, mem-hotplug: add unplug cb for memory device acpi, mem-hotplug: add unplug request cb for memory device acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus docs: update documentation for memory hot unplug virtio: coding style tweak pci: remove hard-coded bar size in msix_init_exclusive_bar() virtio-pci: speedup MSI-X masking and unmasking virtio: introduce vector to virtqueues mapping virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue monitor: check return value of qemu_find_net_clients_except() monitor: replace the magic number 255 with MAX_QUEUE_NUM ... Conflicts: hw/s390x/s390-virtio-bus.c [PMM: fixed conflict in s390_virtio_scsi_properties and s390_virtio_net_properties arrays; since the result of the two conflicting patches is to empty the property arrays completely, the conflict resolution is to remove them entirely.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-07migration: Add hmp interface to set and query parametersLiang Li1-0/+25
Add the hmp interface to tune and query the parameters used in live migration. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-04-30monitor: Remove unused functionsThomas Huth1-13/+0
The functions ringbuf_read_completion() and monitor_get_rs() are not used anywhere anymore, so let's remove them. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-28Merge remote-tracking branch ↵Peter Maydell1-1/+2
'remotes/pmaydell/tags/pull-target-arm-20150427' into staging target-arm queue: * memory system updates to support transaction attributes * set user-mode and secure attributes for accesses made by ARM CPUs * rename c1_coproc to cpacr_el1 * adjust id_aa64pfr0 when has_el3 CPU property disabled * allow ARMv8 SCR.SMD updates # gpg: Signature made Mon Apr 27 16:14:30 2015 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20150427: Allow ARMv8 SCR.SMD updates target-arm: Adjust id_aa64pfr0 when has_el3 CPU property disabled target-arm: rename c1_coproc to cpacr_el1 target-arm: Check watchpoints against CPU security state target-arm: Use attribute info to handle user-only watchpoints target-arm: Add user-mode transaction attribute target-arm: Use correct memory attributes for page table walks target-arm: Honour NS bits in page tables Switch non-CPU callers from ld/st*_phys to address_space_ld/st* exec.c: Capture the memory attributes for a watchpoint hit exec.c: Add new address_space_ld*/st* functions exec.c: Make address_space_rw take transaction attributes exec.c: Convert subpage memory ops to _with_attrs Add MemTxAttrs to the IOTLB Make CPU iotlb a structure rather than a plain hwaddr memory: Replace io_mem_read/write with memory_region_dispatch_read/write memory: Define API for MemoryRegionOps to take attrs and return status Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-27monitor: check return value of qemu_find_net_clients_except()Jason Wang1-4/+4
qemu_find_net_clients_except() may return a value which is greater than the size of array we provided. So we should check this value before using it, otherwise this may cause unexpected memory access. This patch fixes the net related command completion when we have a virtio-net nic with more than 255 queues. Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-27monitor: replace the magic number 255 with MAX_QUEUE_NUMJason Wang1-7/+10
This patch replace the magic number 255, and increase it to MAX_QUEUE_NUM which is maximum number of queues supported by a nic. Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-27Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20150427-1' into ↵Peter Maydell1-3/+2
staging spice: misc fixes. # gpg: Signature made Mon Apr 27 12:03:16 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/spice/tags/pull-spice-20150427-1: spice: learn to hide cursor spice: set pointer position on hotspot spice: fix mouse cursor position spice: fix simple display on bigendian hosts monitor: Make client_migrate_info synchronous Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-27monitor: Make client_migrate_info synchronousMarkus Armbruster1-3/+2
Live migration with spice works like this today: (1) client_migrate_info monitor cmd (2) spice server notifies client, client connects to target host. (3) qemu waits until spice client connect is finished. (4) send over vmstate (i.e. main part of live migration). (5) spice handover to target host. (3) is implemented by making client_migrate_info a async monitor command. This is the only async monitor command we have. The original reason to implement this dance was that qemu did not accept new tcp connections while the incoming migration was running, so (2) and (4) could not be done in parallel. That issue was fixed long ago though. Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp connects while the incoming migration runs. Time to drop step (3). This patch does exactly that, by making the monitor command synchronous and removing the code needed to handle the async monitor command in ui/spice-core.c Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-04-26Switch non-CPU callers from ld/st*_phys to address_space_ld/st*Peter Maydell1-1/+2
Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-24qmp: Give saner messages related to qmp_capabilities misuseEric Blake1-4/+19
Pretending that QMP doesn't understand a command merely because we are not in the right mode doesn't help first-time users figure out what to do to correct things. Although the documentation for QMP calls out capabilities negotiation, we should also make it clear in our error messages what we were expecting. With this patch, I now get the following transcript: $ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults {"QMP": {"version": {"qemu": {"micro": 93, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}} {"execute":"huh"} {"error": {"class": "CommandNotFound", "desc": "The command huh has not been found"}} {"execute":"quit"} {"error": {"class": "CommandNotFound", "desc": "Expecting capabilities negotiation with 'qmp_capabilities' before command 'quit'"}} {"execute":"qmp_capabilities"} {"return": {}} {"execute":"qmp_capabilities"} {"error": {"class": "CommandNotFound", "desc": "Capabilities negotiation is already complete, command 'qmp_capabilities' ignored"}} {"execute":"quit"} {"return": {}} {"timestamp": {"seconds": 1429110729, "microseconds": 181935}, "event": "SHUTDOWN"} Signed-off-by: Eric Blake <eblake@redhat.com> Tested-By: Kashyap Chamarthy <kchamart@redhat.com> Reviewed-by: Paulo Vital <paulo.vital@profitbricks.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-20Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150320-1' into ↵Peter Maydell1-20/+12
staging usb: bugfix collection. # gpg: Signature made Fri Mar 20 07:51:19 2015 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-usb-20150320-1: ehci: fix segfault when hot-unplugging ehci controller ohci: fix resource cleanup leak uhci: fix segfault when hot-unplugging uhci controller hw/usb: Include USB files only if necessary usb/dev-storage: Avoid qerror_report_err() outside QMP handlers usb/dev-storage: Fix QMP device_add missing encryption key failure monitor usb: Inline monitor_read_bdrv_key_start()'s first part monitor: Plug memory leak in monitor_read_bdrv_key_start() monitor: Drop dead QMP check from monitor_read_password() uhci: Convert to realize ohci: Complete conversion to realize usb: Improve companion configuration error messages usb: Propagate errors through usb_register_companion() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-19Merge remote-tracking branch ↵Peter Maydell1-3/+5
'remotes/mjt/tags/pull-trivial-patches-2015-03-19' into staging trivial patches for 2015-03-19 # gpg: Signature made Thu Mar 19 08:57:54 2015 GMT using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-03-19: (24 commits) qga/commands-posix: Fix resource leak elf-loader: Add missing error handling for call of lseek elf-loader: Fix truncation warning from coverity hmp: Fix texinfo documentation Fix typos in comments qtest/ahci: Fix a bit mask expression vl: fix resource leak with monitor_fdset_add_fd smbios: add max speed comdline option for type-17 (meory device) structure pc-dimm: Add description for device list. configure: enable kvm on x32 error: Replace error_report() & error_free() with error_report_err() arm: fix memory leak qmp: Drop unused .user_print from command definitions hmp: Fix definition of command quit target-moxie: Fix warnings from Sparse (one-bit signed bitfield) block/qapi: Fix Sparse warning Fix remaining warnings from Sparse (void return) qom: Fix warning from Sparse target-mips: Fix warning from Sparse arm/nseries: Fix warnings from Sparse ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-19Fix remaining warnings from Sparse (void return)Stefan Weil1-3/+5
Sparse report: hw/display/vga.c:2000:5: warning: returning void-valued expression hw/intc/arm_gic.c:707:9: warning: returning void-valued expression hw/intc/etraxfs_pic.c:138:9: warning: returning void-valued expression hw/nvram/fw_cfg.c:475:5: warning: returning void-valued expression hw/timer/a9gtimer.c:124:5: warning: returning void-valued expression hw/tpm/tpm_tis.c:794:5: warning: returning void-valued expression hw/usb/hcd-musb.c:558:9: warning: returning void-valued expression hw/usb/hcd-musb.c:776:13: warning: returning void-valued expression hw/usb/hcd-musb.c:867:5: warning: returning void-valued expression hw/usb/hcd-musb.c:932:5: warning: returning void-valued expression include/qom/cpu.h:584:5: warning: returning void-valued expression monitor.c:4686:13: warning: returning void-valued expression monitor.c:4690:13: warning: returning void-valued expression Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-18profiler: Reenable built-in profilerAlexey Kardashevskiy1-3/+3
2ed1ebcf6 "timer: replace time() with QEMU_CLOCK_HOST" broke compile when configured with --enable-profiler. Turned out the profiler has been broken for a while. This does s/qemu_time/tcg_time/ as the profiler only works in a TCG mode. This also fixes the compile error. This changes profile_getclock() to return nanoseconds rather than CPU ticks as the "profile" HMP command prints seconds and there is no platform-independent way to get ticks-per-second rate. Since TCG is quite slow and get_clock() returns nanoseconds (fine enough), this should not affect precision much. This removes unused qemu_time_start and tlb_flush_time. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <1426478258-29961-1-git-send-email-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-17qom: Implement info qom-tree HMP commandAndreas Färber1-0/+7
To complement qdev's bus-oriented info qtree, info qom-tree prints a hierarchical view of the QOM composition tree. By default, the machine composition tree is shown. This can be overriden by supplying a path argument, such as "info qom-tree /". Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 00:46:21 +0000