summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-12-10raw: Prohibit dangerous writes for probed imagesKevin Wolf3-3/+69
If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Read only one sector for format probingKevin Wolf2-3/+5
The only image format driver that even potentially accesses anything after 512 bytes in its bdrv_probe() implementation is VMDK, which reads a plain-text descriptor file. In practice, the field it's looking for seems to come first and will be well within the first 512 bytes, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-7-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Factor bdrv_probe_all() out of find_image_format()Markus Armbruster1-13/+35
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-6-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qtests: Specify image format explicitlyKevin Wolf12-18/+21
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-5-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: Add qemu-io format option in Python testsKevin Wolf3-36/+36
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-4-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: Use qemu-io -f $IMGFMTKevin Wolf10-24/+36
This patch changes $QEMU_IO so that all tests by default pass a format argument to qemu-io. There are a few cases where -f $IMGFMT is not wanted because it selects the wrong driver or json: filenames including a driver are used. They are changed to use $QEMU_IO_PROG, which doesn't include any options. Tests 071 and 081 have output changes because now the actual request fails instead of reading the 2k probing buffer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-3-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-io: Allow explicitly specifying formatKevin Wolf1-8/+20
This adds a -f option to qemu-io which allows to explicitly specify the block driver to use for the given image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-2-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10tests: Use "command -v" instead of which(1) in shell scriptsFam Zheng2-5/+5
When which(1) is not installed, we would complain "perl not found" because it's the first set_prog_path check. The error message is wrong. Fix it by using "command -v", a native way to query the existence of a command. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1416380832-9697-1-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-nbd: Use BlockBackend where reasonableMax Reitz1-5/+5
Because qemu-nbd creates the BlockBackend by itself, it should create the according BlockDriverState tree by itself as well; that means, it has call bdrv_open() on its own. This is one of the places where qemu-nbd still needs to use a BlockDriverState directly (the root BDS below the BB); other places are the configuration of zero detection (which may be lifted into the BB eventually, but is not yet) and temporarily loading a snapshot. Everywhere else, though, qemu-nbd can and thus should use BlockBackend. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-7-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10nbd: Use BlockBackend internallyMax Reitz1-28/+28
With all externally visible functions changed to use BlockBackend, this patch makes nbd use BlockBackend for everything internally as well. While touching them, substitute 512 by BDRV_SECTOR_SIZE in the calls to blk_read(), blk_write() and blk_co_discard(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-6-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10nbd: Change external interface to BlockBackendMax Reitz4-17/+18
Substitute BlockDriverState by BlockBackend in every globally visible function provided by nbd. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-5-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Add blk_add_close_notifier() for BBMax Reitz2-0/+6
Adding something like a "delete notifier" to a BlockBackend would not make much sense, because whoever is interested in registering there will probably hold a reference to that BlockBackend; therefore, the notifier will never be called (or only when the notifiee already relinquished its reference and thus most probably is no longer interested in that notification). Therefore, this patch just passes through the close notifier interface of the root BDS. This will be called when the device is ejected, for instance, and therefore does make sense. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Add AioContextNotifier functions to BBMax Reitz2-0/+26
Because all BlockDriverStates behind a single BlockBackend reside in a single AioContext, it is fine to just pass these functions (blk_add_aio_context_notifier() and blk_remove_aio_context_notifier()) through to the root BlockDriverState. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Lift more functions into BlockBackendMax Reitz2-0/+18
There are already some blk_aio_* functions, so we might as well have blk_co_* functions (as far as we need them). This patch adds blk_co_flush(), blk_co_discard(), and also blk_invalidate_cache() (which is not a blk_co_* function but is needed nonetheless). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10ahci: replace SATA FIS type magic numbers with constantsStefan Hajnoczi2-4/+7
SATA 3.0 "10.3.1 FIS Type values" defines the constants used to differentiate between FIS types. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1415874281-7371-3-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10ahci: avoid #ifdef DEBUG_AHCI bitrotStefan Hajnoczi1-10/+8
Debug code using #ifdef is susceptible to bitrot because the compiler never checks the debug code. This is easy to avoid, change the DPRINTF() macro to use if (DEBUG_AHCI) and always give it a 0 or 1 value. This also allows us to drop an #ifdef DEBUG_AHCI in ahci_start_dma() since the compiler can now see the local variable is used. The motivation for this change is a recent DEBUG_AHCI build failure due to an outdated DPRINTF() format string. From now on the compiler will catch these errors. Cc: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1415874281-7371-2-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10iotests: Plain blkdebug filename generationMax Reitz2-1/+22
Add one test whether blkdebug is able to generate a plain filename if given a configuration file and a file to be tested only; and add another test whether blkdebug is able to do the same without being given a configuration file. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1415697825-26678-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blkdebug: Simplify and improve filename generationMax Reitz2-73/+30
Instead of actually recreating the options from scratch, just reuse the options given for creating the BDS, which are the configuration file name and additional options. In case there are no additional options we can thus create a plain filename. This obviously results in a different output for qemu-iotest 099 which exactly tests this filename generation. Fix it up as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10monitor: Fix HMP tab completionKevin Wolf1-1/+1
Commands with multiple boolean flag options (like 'info block') didn't provide correct completion because only the first one was skipped. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Allow node-name in 'info block'Kevin Wolf2-4/+33
The optional parameter specifying a block device allows now to use a node-name instead of a drive name (and therefore to inspect any node in the graph). The new -n options allows listing all named nodes instead of BlockBackends. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Allow info = NULL in print_block_info()Kevin Wolf1-9/+25
This allows printing infos of BlockDriverStates that aren't at the root of the graph (and logically implementing a BlockBackend). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Factor out print_block_info()Kevin Wolf1-95/+97
The new function prints the info for a single BlockDriverState. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/qapi: Add cache information to query-blockKevin Wolf5-1/+60
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-12-10blockdev: acquire AioContext in change-backing-fileStefan Hajnoczi2-6/+14
Add dataplane support to the change-backing-file QMP commands. By acquiring the AioContext we avoid race conditions with the dataplane thread which may also be accessing the BlockDriverState. Note that this command operates on both bs and a node in its chain (image_bs). The bdrv_chain_contains(bs, image_bs) check guarantees that bs and image_bs are in the same AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: acquire AioContext in eject, change, and block_passwdStefan Hajnoczi2-7/+30
By acquiring the AioContext we avoid race conditions with the dataplane thread which may also be accessing the BlockDriverState. Fix up eject, change, and block_passwd in a single patch because qmp_eject() and qmp_change_blockdev() both call eject_device(). Also fix block_passwd while we're tackling a command that takes a block encryption password. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: check for BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETEStefan Hajnoczi1-0/+4
The BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETE op blocker exists but was never used! Let's fix that so snapshot delete can be blocked. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: acquire AioContext in blockdev-snapshot-delete-internal-syncStefan Hajnoczi2-3/+15
Add dataplane support to the blockdev-snapshot-delete-internal-sync QMP command. By acquiring the AioContext we avoid race conditions with the dataplane thread which may also be accessing the BlockDriverState. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10iotests: Use -qmp-pretty in 067Max Reitz2-58/+723
067 invokes query-block, resulting in a reference output with really long lines (which may pose a problem in email patches and always poses a problem when the output changes, because it is hard to see what has actually changed). Use -qmp-pretty to mitigate this issue. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10iotests: _filter_qmp for pretty JSON outputMax Reitz1-1/+3
_filter_qmp should be able to correctly filter out the QMP version object for pretty JSON output. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10chardev: Add -qmp-prettyMax Reitz2-5/+18
Add a command line option for adding a QMP monitor using pretty JSON formatting. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qjson: Drop trailing space for pretty formattingMax Reitz1-4/+6
For the pretty formatting, the functions converting QDicts and QLists to JSON should not print a space after the comma separating objects, because a newline will emitted immediately afterwards, making the whitespace superfluous. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qmp: Add optional switch "query-nodes" in query-blockstatsFam Zheng4-10/+25
This bool option will allow query all the node names. It iterates all the BDSes that are assigned a name, also in this case don't query up the backing chain. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Include "node-name" if present in query-blockstatsFam Zheng2-1/+9
Node name is a better identifier of BDS. We will want to query statistics of a BDS node buried in the BDS graph, so reporting the node's name if there is one will do the trick. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Add bdrv_get_node_nameFam Zheng2-0/+6
This returns the node name of a BDS. Remove the TODO comment and expect the callers to be explicit. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Add bdrv_next_nodeFam Zheng2-0/+9
Similar to bdrv_next, this traverses through graph_bdrv_states. Will be useful to enumerate all the named nodes. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-09Open 2.3 development treePeter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-09Update version for v2.2.0 releasePeter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-04Update version for v2.2.0-rc5 releasePeter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-04Merge remote-tracking branch ↵Peter Maydell1-17/+48
'remotes/kraxel/tags/pull-cve-2014-8106-20141204-1' into staging cirrus: fix blit region check # gpg: Signature made Thu 04 Dec 2014 11:54:57 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-cve-2014-8106-20141204-1: cirrus: don't overflow CirrusVGAState->cirrus_bltbuf cirrus: fix blit region check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-01Update version for v2.2.0-rc4 releasePeter Maydell1-1/+1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-01vhost: Fix vhostfd leak in error branchGonglei2-0/+3
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1417166789-1960-1-git-send-email-arei.gonglei@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-01cirrus: don't overflow CirrusVGAState->cirrus_bltbufGerd Hoffmann1-0/+4
This is CVE-2014-8106. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-01cirrus: fix blit region checkGerd Hoffmann1-17/+44
Issues: * Doesn't check pitches correctly in case it is negative. * Doesn't check width at all. Turn macro into functions while being at it, also factor out the check for one region which we then can simply call twice for src + dst. This is CVE-2014-8106. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-28Fix for crash after migration in virtio-rng on bi-endian targetsDavid Gibson1-7/+8
VirtIO devices now remember which endianness they're operating in in order to support targets which may have guests of either endianness, such as powerpc. This endianness state is transferred in a subsection of the virtio device's information. With virtio-rng this can lead to an abort after a loadvm hitting the assert() in virtio_is_big_endian(). This can be reproduced by doing a migrate and load from file on a bi-endian target with a virtio-rng device. The actual guest state isn't particularly important to triggering this. The cause is that virtio_rng_load_device() calls virtio_rng_process() which accesses the ring and thus needs the endianness. However, virtio_rng_process() is called via virtio_load() before it loads the subsections. Essentially the ->load callback in VirtioDeviceClass should only be used for actually reading the device state from the stream, not for post-load re-initialization. This patch fixes the bug by moving the virtio_rng_process() after the call to virtio_load(). Better yet would be to convert virtio to use vmsd and have the virtio_rng_process() as a post_load callback, but that's a bigger project for another day. This is bugfix, and should be considered for the 2.2 branch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Message-id: 1417067290-20715-1-git-send-email-david@gibson.dropbear.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-28virtio-net: fix unmap leakJason Wang1-2/+3
virtio_net_handle_ctrl() and other functions that process control vq request call iov_discard_front() which will shorten the iov. This will lead unmapping in virtqueue_push() leaks mapping. Fixes this by keeping the original iov untouched and using a temp variable in those functions. Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1417082643-23907-1-git-send-email-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-27hmp: fix regression of HMP device_del auto-completionMarcel Apfelbaum3-10/+15
The commits: - 6a1fa9f5 (monitor: add del completion for peripheral device) - 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper) cause a QEMU crash when trying to use HMP device_del auto-completion. It can be easily reproduced by: <qemu-bin> -enable-kvm ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet (qemu) device_del /home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device Aborted (core dumped) The root cause is qdev_build_hotpluggable_device_list going recursively over all peripherals and their children assuming all are devices. It doesn't work since PCI devices have at least on child which is a memory region (bus master). Solved by observing that all devices appear as direct children of /machine/peripheral container. No need of going recursively over all the children. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reported-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-27qemu-timer: Avoid overflows when converting timeout to struct timespecPeter Maydell1-1/+8
In qemu_poll_ns(), when we convert an int64_t nanosecond timeout into a struct timespec, we may accidentally run into overflow problems if the timeout is very long. This happens because the tv_sec field is a time_t, which is signed, so we might end up setting it to a negative value by mistake. This will result in what was intended to be a near-infinite timeout turning into an instantaneous timeout, and we'll busy loop. Cap the maximum timeout at INT32_MAX seconds (about 68 years) to avoid this problem. This specifically manifested on ARM hosts as an extreme slowdown on guest shutdown (when the guest reprogrammed the PL031 RTC to not generate alarms using a very long timeout) but could happen on other hosts and guests too. Reported-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1416939705-1272-1-git-send-email-peter.maydell@linaro.org
2014-11-26Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell9-20/+54
The final 2.2 patches from me. # gpg: Signature made Wed 26 Nov 2014 11:12:25 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: s390x/kvm: Fix compile error fw_cfg: fix boot order bug when dynamically modified via QOM -machine vmport=auto: Fix handling of VMWare ioport emulation for xen Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-26s390x/kvm: Fix compile errorChristian Borntraeger1-2/+2
commit a2b257d6212a "memory: expose alignment used for allocating RAM as MemoryRegion API" triggered a compile error on KVM/s390x. Fix the prototype and the implementation of legacy_s390_alloc. Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26fw_cfg: fix boot order bug when dynamically modified via QOMGonglei1-2/+5
When we dynamically modify boot order, the length of boot order will be changed, but we don't update s->files->f[i].size with new length. This casuse seabios read a wrong vale of qemu cfg file about bootorder. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 08:12:12 +0000