From ef7315084ede82ea55f251003a6f0088d95d9fa6 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 27 Aug 2010 09:49:50 +0000 Subject: ARM: mach-shmobile: ap4evb: modify tsc2007 platform settings This patch modify x_plate_ohms to correct value for tsc2007, and removed un-necessary ts_get_pendown_state(). gpio_pull_up() was removed also. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 51 +++-------------------------------- 1 file changed, 3 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 95935c83c306..0cb9e7cf1ddc 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -756,7 +756,6 @@ device_initcall(hdmi_init_pm_clock); * FIXME !! * * gpio_no_direction - * gpio_pull_up * are quick_hack. * * current gpio frame work doesn't have @@ -768,58 +767,12 @@ static void __init gpio_no_direction(u32 addr) __raw_writeb(0x00, addr); } -static void __init gpio_pull_up(u32 addr) -{ - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xC0; - __raw_writeb(data, addr); -} - /* TouchScreen */ #define IRQ28 evt2irq(0x3380) /* IRQ28A */ #define IRQ7 evt2irq(0x02e0) /* IRQ7A */ -static int ts_get_pendown_state(void) -{ - int val1, val2; - - gpio_free(GPIO_FN_IRQ28_123); - gpio_free(GPIO_FN_IRQ7_40); - - gpio_request(GPIO_PORT123, NULL); - gpio_request(GPIO_PORT40, NULL); - - gpio_direction_input(GPIO_PORT123); - gpio_direction_input(GPIO_PORT40); - - val1 = gpio_get_value(GPIO_PORT123); - val2 = gpio_get_value(GPIO_PORT40); - - gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ - gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ - - return val1 ^ val2; -} - -#define PORT40CR 0xE6051028 -#define PORT123CR 0xE605007B -static int ts_init(void) -{ - gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ - gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ - - gpio_pull_up(PORT40CR); - gpio_pull_up(PORT123CR); - - return 0; -} - static struct tsc2007_platform_data tsc2007_info = { .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, - .init_platform_hw = ts_init, + .x_plate_ohms = 1000, }; static struct i2c_board_info tsc_device = { @@ -994,6 +947,7 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_KEYIN4, NULL); /* enable TouchScreen */ + gpio_request(GPIO_FN_IRQ28_123, NULL); set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); tsc_device.irq = IRQ28; @@ -1069,6 +1023,7 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].lcd_size_cfg.height = 91; /* enable TouchScreen */ + gpio_request(GPIO_FN_IRQ7_40, NULL); set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); tsc_device.irq = IRQ7; -- cgit v1.2.3 From dd8a61a739f98c2cd2fbf811b5b659433f0023f6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 31 Aug 2010 09:22:36 +0000 Subject: ARM: mach-shmobile: Extend AP4EVB LCD comments Extend dip switch comments for QHD and WVGA LCD panels on AP4EVB. Similar to the Ecovec comments. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 0cb9e7cf1ddc..31e5b28ab9b4 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -930,8 +930,10 @@ static void __init ap4evb_init(void) ARRAY_SIZE(i2c1_devices)); #ifdef CONFIG_AP4EVB_QHD + /* - * QHD + * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and + * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON. */ /* enable KEYSC */ @@ -976,8 +978,10 @@ static void __init ap4evb_init(void) #else /* - * WVGA + * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and + * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF. */ + gpio_request(GPIO_FN_LCDD17, NULL); gpio_request(GPIO_FN_LCDD16, NULL); gpio_request(GPIO_FN_LCDD15, NULL); -- cgit v1.2.3 From f989ae5b01b065b2124f5b83fffaddda07f6a38c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 31 Aug 2010 09:27:53 +0000 Subject: ARM: mach-shmobile: Use evt2irq() for sh7372 DMAC Use evt2irq() for DMAC resources on sh7372. This makes the code easier to read and also allows adjusting the INTC base offset without breaking platform data. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/setup-sh7372.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index e26686c9d0b6..f6cdf76a3a3d 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -419,14 +419,14 @@ static struct resource sh7372_dmae0_resources[] = { }, { /* DMA error IRQ */ - .start = 246, - .end = 246, + .start = evt2irq(0x20c0), + .end = evt2irq(0x20c0), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = 240, - .end = 245, + .start = evt2irq(0x2000), + .end = evt2irq(0x20a0), .flags = IORESOURCE_IRQ, }, }; @@ -447,14 +447,14 @@ static struct resource sh7372_dmae1_resources[] = { }, { /* DMA error IRQ */ - .start = 254, - .end = 254, + .start = evt2irq(0x21c0), + .end = evt2irq(0x21c0), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = 248, - .end = 253, + .start = evt2irq(0x2100), + .end = evt2irq(0x21a0), .flags = IORESOURCE_IRQ, }, }; @@ -475,14 +475,14 @@ static struct resource sh7372_dmae2_resources[] = { }, { /* DMA error IRQ */ - .start = 262, - .end = 262, + .start = evt2irq(0x22c0), + .end = evt2irq(0x22c0), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = 256, - .end = 261, + .start = evt2irq(0x2200), + .end = evt2irq(0x22a0), .flags = IORESOURCE_IRQ, }, }; -- cgit v1.2.3 From 53b29b4c36cdfcb3d0641edf180db7ebd53ec029 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 2 Sep 2010 07:20:40 +0000 Subject: ARM: mach-shmobile: pfc-sh7372: modify wrong comment Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/pfc-sh7372.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index ec420353f8e3..9c265dae138a 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -166,12 +166,12 @@ enum { MSIOF2_TSYNC_MARK, MSIOF2_TSCK_MARK, MSIOF2_RXD_MARK, MSIOF2_TXD_MARK, - /* MSIOF3 */ + /* BBIF1 */ BBIF1_RXD_MARK, BBIF1_TSYNC_MARK, BBIF1_TSCK_MARK, BBIF1_TXD_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK, BBIF1_FLOW_MARK, BB_RX_FLOW_N_MARK, - /* MSIOF4 */ + /* BBIF2 */ BBIF2_TSCK1_MARK, BBIF2_TSYNC1_MARK, BBIF2_TXD1_MARK, BBIF2_RXD_MARK, @@ -976,12 +976,12 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_TSCK), GPIO_FN(MSIOF2_RXD), GPIO_FN(MSIOF2_TXD), - /* MSIOF3 */ + /* BBIF1 */ GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TSYNC), GPIO_FN(BBIF1_TSCK), GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC), GPIO_FN(BBIF1_FLOW), GPIO_FN(BB_RX_FLOW_N), - /* MSIOF4 */ + /* BBIF2 */ GPIO_FN(BBIF2_TSCK1), GPIO_FN(BBIF2_TSYNC1), GPIO_FN(BBIF2_TXD1), GPIO_FN(BBIF2_RXD), -- cgit v1.2.3 From 7923ac133b5dcdbb0cfff245d8045f1ff9694cba Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 3 Sep 2010 05:36:43 +0000 Subject: ARM: mach-shmobile: sh7372: modify INTCS table Add ignored device name by comment-out in INTCS. And MSIOF which has been forgotten is added Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh7372.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index e3551b56cd03..4cd3cae38e72 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -369,9 +369,13 @@ enum { INTCS, /* interrupt sources INTCS */ + + /* IRQ0S - IRQ31S */ VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3, RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3, CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2, + /* MFI */ + /* BBIF2 */ VPU, TSIF1, _3DG_SGX530, @@ -379,13 +383,17 @@ enum { IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, IPMMU_IPMMUR, IPMMU_IPMMUR2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR, + /* KEYSC */ + /* TTI20 */ MSIOF, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, CMT0, TSIF0, + /* CMT2 */ LMB, CTI, + /* RWDT0 */ ICB, JPU_JPEG, LCDC, @@ -397,11 +405,17 @@ enum { CSIRX, DSITX_DSITX0, DSITX_DSITX1, + /* SPU2 */ + /* FSI */ + /* FMSI */ + /* HDMI */ TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, + /* MFIS2 */ CPORTS2R, + /* CEC */ JPU6E, /* interrupt groups INTCS */ @@ -410,12 +424,15 @@ enum { }; static struct intc_vect intcs_vectors[] = { + /* IRQ0S - IRQ31S */ INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720), INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760), INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820), INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860), INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0), INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0), + /* MFI */ + /* BBIF2 */ INTCS_VECT(VPU, 0x980), INTCS_VECT(TSIF1, 0x9a0), INTCS_VECT(_3DG_SGX530, 0x9e0), @@ -425,14 +442,19 @@ static struct intc_vect intcs_vectors[] = { INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20), INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0), INTCS_VECT(RTDMAC_2_DADERR, 0xbc0), + /* KEYSC */ + /* TTI20 */ + INTCS_VECT(MSIOF, 0x0d20), INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20), INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60), INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0), INTCS_VECT(TMU_TUNI2, 0xec0), INTCS_VECT(CMT0, 0xf00), INTCS_VECT(TSIF0, 0xf20), + /* CMT2 */ INTCS_VECT(LMB, 0xf60), INTCS_VECT(CTI, 0x400), + /* RWDT0 */ INTCS_VECT(ICB, 0x480), INTCS_VECT(JPU_JPEG, 0x560), INTCS_VECT(LCDC, 0x580), @@ -446,12 +468,18 @@ static struct intc_vect intcs_vectors[] = { INTCS_VECT(CSIRX, 0x17a0), INTCS_VECT(DSITX_DSITX0, 0x17c0), INTCS_VECT(DSITX_DSITX1, 0x17e0), + /* SPU2 */ + /* FSI */ + /* FMSI */ + /* HDMI */ INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920), INTCS_VECT(TMU1_TUNI2, 0x1940), INTCS_VECT(CMT4, 0x1980), INTCS_VECT(DSITX1_DSITX1_0, 0x19a0), INTCS_VECT(DSITX1_DSITX1_1, 0x19c0), + /* MFIS2 */ INTCS_VECT(CPORTS2R, 0x1a20), + /* CEC */ INTCS_VECT(JPU6E, 0x1a80), INTC_VECT(INTCS, 0xf80), -- cgit v1.2.3 From 44432407d9f5e4b2e56c7eccb65d98cad4bba191 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 3 Sep 2010 07:20:04 +0000 Subject: fbdev: sh_mobile_lcdcfb: Support multiple video modes in platform data This is a preparation for HDMI hotplug support. This patch just moves all platform defined video modes for the sh_mobile_lcdcfb driver to separate arrays and switches all users to use element 0 of that array, so, this patch doesn't introduce any functional changes and as such should not cause any regressions. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 98 ++++++++++++++++++++--------------- arch/sh/boards/mach-ap325rxa/setup.c | 29 ++++++----- arch/sh/boards/mach-ecovec24/setup.c | 60 ++++++++++++--------- arch/sh/boards/mach-kfr2r09/setup.c | 29 ++++++----- arch/sh/boards/mach-migor/setup.c | 58 +++++++++++---------- arch/sh/boards/mach-se/7724/setup.c | 54 ++++++++++++------- drivers/video/sh_mipi_dsi.c | 32 +++++++----- drivers/video/sh_mobile_hdmi.c | 3 +- drivers/video/sh_mobile_lcdcfb.c | 10 ++-- include/video/sh_mobile_lcdc.h | 3 +- 10 files changed, 219 insertions(+), 157 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 31e5b28ab9b4..4e883e0fb01b 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -375,10 +375,40 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; +const static struct fb_videomode ap4evb_lcdc_modes[] = { + { +#ifdef CONFIG_AP4EVB_QHD + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, +#else + .name = "WVGA Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, +#endif + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, + .lcd_cfg = ap4evb_lcdc_modes, + .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), } }; @@ -569,6 +599,31 @@ static struct platform_device fsi_device = { }, }; +const static struct fb_videomode ap4evb_hdmi_modes[] = { + { + .name = "HDMI 720p", + .xres = 1280, + .yres = 720, + + /* + * If left and right margins are not multiples of 8, + * LDHAJR will be adjusted accordingly by the LCDC + * driver. Until we start using EDID, these values + * might have to be adjusted for different monitors. + */ + .left_margin = 200, + .right_margin = 88, + .hsync_len = 48, + + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + + .pixclock = 13468, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, +}; + static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { @@ -577,26 +632,8 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, - .lcd_cfg = { - .name = "HDMI", - /* So far only 720p is supported */ - .xres = 1280, - .yres = 720, - /* - * If left and right margins are not multiples of 8, - * LDHAJR will be adjusted accordingly by the LCDC - * driver. Until we start using EDID, these values - * might have to be adjusted for different monitors. - */ - .left_margin = 200, - .right_margin = 88, - .hsync_len = 48, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .pixclock = 13468, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, - }, + .lcd_cfg = ap4evb_hdmi_modes, + .num_cfg = ARRAY_SIZE(ap4evb_hdmi_modes), } }; @@ -960,17 +997,6 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB24; lcdc_info.ch[0].clock_divider = 1; lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; - lcdc_info.ch[0].lcd_cfg.name = "R63302(QHD)"; - lcdc_info.ch[0].lcd_cfg.xres = 544; - lcdc_info.ch[0].lcd_cfg.yres = 961; - lcdc_info.ch[0].lcd_cfg.left_margin = 72; - lcdc_info.ch[0].lcd_cfg.right_margin = 600; - lcdc_info.ch[0].lcd_cfg.hsync_len = 16; - lcdc_info.ch[0].lcd_cfg.upper_margin = 8; - lcdc_info.ch[0].lcd_cfg.lower_margin = 8; - lcdc_info.ch[0].lcd_cfg.vsync_len = 2; - lcdc_info.ch[0].lcd_cfg.sync = FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_HOR_HIGH_ACT; lcdc_info.ch[0].lcd_size_cfg.width = 44; lcdc_info.ch[0].lcd_size_cfg.height = 79; @@ -1013,16 +1039,6 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB18; lcdc_info.ch[0].clock_divider = 2; lcdc_info.ch[0].flags = 0; - lcdc_info.ch[0].lcd_cfg.name = "WVGA Panel"; - lcdc_info.ch[0].lcd_cfg.xres = 800; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 70; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; - lcdc_info.ch[0].lcd_cfg.sync = 0; lcdc_info.ch[0].lcd_size_cfg.width = 152; lcdc_info.ch[0].lcd_size_cfg.height = 91; diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 3da116f47f01..00553233a7c5 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -176,6 +176,21 @@ static void ap320_wvga_power_off(void *board_data) __raw_writew(0, FPGA_LCDREG); } +const static struct fb_videomode ap325rxa_lcdc_modes[] = { + { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 32, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { @@ -183,18 +198,8 @@ static struct sh_mobile_lcdc_info lcdc_info = { .bpp = 16, .interface_type = RGB18, .clock_divider = 1, - .lcd_cfg = { - .name = "LB070WV1", - .xres = 800, - .yres = 480, - .left_margin = 32, - .right_margin = 160, - .hsync_len = 8, - .upper_margin = 63, - .lower_margin = 80, - .vsync_len = 1, - .sync = 0, /* hsync and vsync are active low */ - }, + .lcd_cfg = ap325rxa_lcdc_modes, + .num_cfg = ARRAY_SIZE(ap325rxa_lcdc_modes), .lcd_size_cfg = { /* 7.0 inch */ .width = 152, .height = 91, diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 1d7b495a7db4..feadf5dada77 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -231,14 +231,41 @@ static struct platform_device usb1_common_device = { }; /* LCDC */ +const static struct fb_videomode ecovec_lcd_modes[] = { + { + .name = "Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + +const static struct fb_videomode ecovec_dvi_modes[] = { + { + .name = "DVI", + .xres = 1280, + .yres = 720, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .interface_type = RGB18, .chan = LCDC_CHAN_MAINLCD, .bpp = 16, - .lcd_cfg = { - .sync = 0, /* hsync and vsync are active low */ - }, .lcd_size_cfg = { /* 7.0 inch */ .width = 152, .height = 91, @@ -1079,33 +1106,18 @@ static int __init arch_setup(void) if (gpio_get_value(GPIO_PTE6)) { /* DVI */ lcdc_info.clock_source = LCDC_CLK_EXTERNAL; - lcdc_info.ch[0].clock_divider = 1, - lcdc_info.ch[0].lcd_cfg.name = "DVI"; - lcdc_info.ch[0].lcd_cfg.xres = 1280; - lcdc_info.ch[0].lcd_cfg.yres = 720; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 40; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].clock_divider = 1; + lcdc_info.ch[0].lcd_cfg = ecovec_dvi_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_dvi_modes); gpio_set_value(GPIO_PTA2, 1); gpio_set_value(GPIO_PTU1, 1); } else { /* Panel */ - lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; - lcdc_info.ch[0].clock_divider = 2, - lcdc_info.ch[0].lcd_cfg.name = "Panel"; - lcdc_info.ch[0].lcd_cfg.xres = 800; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 70; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].clock_divider = 2; + lcdc_info.ch[0].lcd_cfg = ecovec_lcd_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_lcd_modes); gpio_set_value(GPIO_PTR1, 1); diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 68994a163f6c..87d4b90e368c 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -126,6 +126,21 @@ static struct platform_device kfr2r09_sh_keysc_device = { }, }; +const static struct fb_videomode kfr2r09_lcdc_modes[] = { + { + .name = "TX07D34VM0AAA", + .xres = 240, + .yres = 400, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .upper_margin = 0, + .lower_margin = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + }, +}; + static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { @@ -134,18 +149,8 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { .interface_type = SYS18, .clock_divider = 6, .flags = LCDC_FLAGS_DWPOL, - .lcd_cfg = { - .name = "TX07D34VM0AAA", - .xres = 240, - .yres = 400, - .left_margin = 0, - .right_margin = 16, - .hsync_len = 8, - .upper_margin = 0, - .lower_margin = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - }, + .lcd_cfg = kfr2r09_lcdc_modes, + .num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes), .lcd_size_cfg = { .width = 35, .height = 58, diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 662debe4ead2..9204cbb87147 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -213,51 +213,55 @@ static struct platform_device migor_nand_flash_device = { } }; +const static struct fb_videomode migor_lcd_modes[] = { + { +#if defined(CONFIG_SH_MIGOR_RTA_WVGA) + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 64, + .right_margin = 16, + .hsync_len = 120, + .sync = 0, +#elif defined(CONFIG_SH_MIGOR_QVGA) + .name = "PH240320T", + .xres = 320, + .yres = 240, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .sync = FB_SYNC_HOR_HIGH_ACT, +#endif + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + }, +}; + static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { -#ifdef CONFIG_SH_MIGOR_RTA_WVGA +#if defined(CONFIG_SH_MIGOR_RTA_WVGA) .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .interface_type = RGB16, .clock_divider = 2, - .lcd_cfg = { - .name = "LB070WV1", - .xres = 800, - .yres = 480, - .left_margin = 64, - .right_margin = 16, - .hsync_len = 120, - .upper_margin = 1, - .lower_margin = 17, - .vsync_len = 2, - .sync = 0, - }, + .lcd_cfg = migor_lcd_modes, + .num_cfg = ARRAY_SIZE(migor_lcd_modes), .lcd_size_cfg = { /* 7.0 inch */ .width = 152, .height = 91, }, } -#endif -#ifdef CONFIG_SH_MIGOR_QVGA +#elif defined(CONFIG_SH_MIGOR_QVGA) .clock_source = LCDC_CLK_PERIPHERAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .interface_type = SYS16A, .clock_divider = 10, - .lcd_cfg = { - .name = "PH240320T", - .xres = 320, - .yres = 240, - .left_margin = 0, - .right_margin = 16, - .hsync_len = 8, - .upper_margin = 1, - .lower_margin = 17, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT, - }, + .lcd_cfg = migor_lcd_modes, + .num_cfg = ARRAY_SIZE(migor_lcd_modes), .lcd_size_cfg = { /* 2.4 inch */ .width = 49, .height = 37, diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 552ebd9ba82b..3099c36759ad 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -144,16 +144,42 @@ static struct platform_device nor_flash_device = { }; /* LCDC */ +const static struct fb_videomode lcdc_720p_modes[] = { + { + .name = "LB070WV1", + .sync = 0, /* hsync and vsync are active low */ + .xres = 1280; + .yres = 720; + .left_margin = 220; + .right_margin = 110; + .hsync_len = 40; + .upper_margin = 20; + .lower_margin = 5; + .vsync_len = 5; + }, +}; + +const static struct fb_videomode lcdc_vga_modes[] = { + { + .name = "LB070WV1", + .sync = 0, /* hsync and vsync are active low */ + .xres = 640; + .yres = 480; + .left_margin = 105; + .right_margin = 50; + .hsync_len = 96; + .upper_margin = 33; + .lower_margin = 10; + .vsync_len = 2; + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .clock_divider = 1, - .lcd_cfg = { - .name = "LB070WV1", - .sync = 0, /* hsync and vsync are active low */ - }, .lcd_size_cfg = { /* 7.0 inch */ .width = 152, .height = 91, @@ -909,24 +935,12 @@ static int __init devices_setup(void) if (sw & SW41_B) { /* 720p */ - lcdc_info.ch[0].lcd_cfg.xres = 1280; - lcdc_info.ch[0].lcd_cfg.yres = 720; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 40; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].lcd_cfg = lcdc_720p_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_720p_modes); } else { /* VGA */ - lcdc_info.ch[0].lcd_cfg.xres = 640; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 105; - lcdc_info.ch[0].lcd_cfg.right_margin = 50; - lcdc_info.ch[0].lcd_cfg.hsync_len = 96; - lcdc_info.ch[0].lcd_cfg.upper_margin = 33; - lcdc_info.ch[0].lcd_cfg.lower_margin = 10; - lcdc_info.ch[0].lcd_cfg.vsync_len = 2; + lcdc_info.ch[0].lcd_cfg = lcdc_vga_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_vga_modes); } if (sw & SW41_A) { diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c index 5699ce0c1780..3f3d431033ca 100644 --- a/drivers/video/sh_mipi_dsi.c +++ b/drivers/video/sh_mipi_dsi.c @@ -123,83 +123,87 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi, u32 linelength; bool yuv; - /* Select data format */ + /* + * Select data format. MIPI DSI is not hot-pluggable, so, we just use + * the default videomode. If this ever becomes a problem, We'll have to + * move this to mipi_display_on() above and use info->var.xres + */ switch (pdata->data_format) { case MIPI_RGB888: pctype = 0; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24; pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; - linelength = ch->lcd_cfg.xres * 3; + linelength = ch->lcd_cfg[0].xres * 3; yuv = false; break; case MIPI_RGB565: pctype = 1; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16; pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; - linelength = ch->lcd_cfg.xres * 2; + linelength = ch->lcd_cfg[0].xres * 2; yuv = false; break; case MIPI_RGB666_LP: pctype = 2; datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18; pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; - linelength = ch->lcd_cfg.xres * 3; + linelength = ch->lcd_cfg[0].xres * 3; yuv = false; break; case MIPI_RGB666: pctype = 3; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18; pixfmt = MIPI_DCS_PIXEL_FMT_18BIT; - linelength = (ch->lcd_cfg.xres * 18 + 7) / 8; + linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8; yuv = false; break; case MIPI_BGR888: pctype = 8; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24; pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; - linelength = ch->lcd_cfg.xres * 3; + linelength = ch->lcd_cfg[0].xres * 3; yuv = false; break; case MIPI_BGR565: pctype = 9; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16; pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; - linelength = ch->lcd_cfg.xres * 2; + linelength = ch->lcd_cfg[0].xres * 2; yuv = false; break; case MIPI_BGR666_LP: pctype = 0xa; datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18; pixfmt = MIPI_DCS_PIXEL_FMT_24BIT; - linelength = ch->lcd_cfg.xres * 3; + linelength = ch->lcd_cfg[0].xres * 3; yuv = false; break; case MIPI_BGR666: pctype = 0xb; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18; pixfmt = MIPI_DCS_PIXEL_FMT_18BIT; - linelength = (ch->lcd_cfg.xres * 18 + 7) / 8; + linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8; yuv = false; break; case MIPI_YUYV: pctype = 4; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16; pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; - linelength = ch->lcd_cfg.xres * 2; + linelength = ch->lcd_cfg[0].xres * 2; yuv = true; break; case MIPI_UYVY: pctype = 5; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16; pixfmt = MIPI_DCS_PIXEL_FMT_16BIT; - linelength = ch->lcd_cfg.xres * 2; + linelength = ch->lcd_cfg[0].xres * 2; yuv = true; break; case MIPI_YUV420_L: pctype = 6; datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12; pixfmt = MIPI_DCS_PIXEL_FMT_12BIT; - linelength = (ch->lcd_cfg.xres * 12 + 7) / 8; + linelength = (ch->lcd_cfg[0].xres * 12 + 7) / 8; yuv = true; break; case MIPI_YUV420: @@ -207,7 +211,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi, datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12; pixfmt = MIPI_DCS_PIXEL_FMT_12BIT; /* Length of U/V line */ - linelength = (ch->lcd_cfg.xres + 1) / 2; + linelength = (ch->lcd_cfg[0].xres + 1) / 2; yuv = true; break; default: @@ -281,7 +285,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi, iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */ /* * 0x660 = 1632 bytes per line (RGB24, 544 pixels: see - * sh_mobile_lcdc_info.ch[0].lcd_cfg.xres), HSALEN = 1 - default + * sh_mobile_lcdc_info.ch[0].lcd_cfg[0].xres), HSALEN = 1 - default * (unused, since VMCTR2[HSABM] = 0) */ iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */ diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c index a8117c33e75f..6608429c0fbb 100644 --- a/drivers/video/sh_mobile_hdmi.c +++ b/drivers/video/sh_mobile_hdmi.c @@ -777,7 +777,8 @@ static int __init sh_hdmi_probe(struct platform_device *pdev) goto egetclk; } - rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg.pixclock) * 1000; + /* TODO: reconfigure the clock on monitor plug in */ + rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg[0].pixclock) * 1000; rate = clk_round_rate(hdmi->hdmi_clk, rate); if (rate < 0) { diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index e4f6012fe4e3..ce3ed4bc991f 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -989,8 +989,8 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb, int ret; /* Can we handle this display? */ - if (var->xres > ch->cfg.lcd_cfg.xres || - var->yres > ch->cfg.lcd_cfg.yres) + if (var->xres > ch->cfg.lcd_cfg[0].xres || + var->yres > ch->cfg.lcd_cfg[0].yres) return -ENOMEM; /* Add to the modelist */ @@ -1115,7 +1115,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev) info = ch->info; var = &info->var; - lcd_cfg = &cfg->lcd_cfg; + lcd_cfg = &cfg->lcd_cfg[0]; info->fbops = &sh_mobile_lcdc_ops; fb_videomode_to_var(var, lcd_cfg); /* Default Y virtual resolution is 2x panel size */ @@ -1187,8 +1187,8 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev) pdev->name, (ch->cfg.chan == LCDC_CHAN_MAINLCD) ? "mainlcd" : "sublcd", - (int) ch->cfg.lcd_cfg.xres, - (int) ch->cfg.lcd_cfg.yres, + (int) ch->cfg.lcd_cfg[0].xres, + (int) ch->cfg.lcd_cfg[0].yres, ch->cfg.bpp); /* deferred io mode: disable clock to save power */ diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h index 55d700e8566e..19c69d788f3b 100644 --- a/include/video/sh_mobile_lcdc.h +++ b/include/video/sh_mobile_lcdc.h @@ -70,7 +70,8 @@ struct sh_mobile_lcdc_chan_cfg { int interface_type; /* selects RGBn or SYSn I/F, see above */ int clock_divider; unsigned long flags; /* LCDC_FLAGS_... */ - struct fb_videomode lcd_cfg; + const struct fb_videomode *lcd_cfg; + int num_cfg; struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg; struct sh_mobile_lcdc_board_cfg board_cfg; struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ -- cgit v1.2.3 From a91a2d06c9797c0a533a71dbeea37b2d5a60c7f5 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 3 Sep 2010 07:20:42 +0000 Subject: ARM: mach-shmobile: add two more video modes for HDMI Add video modes for 480p and SXGA (1280x1024). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 41 ++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 4e883e0fb01b..005337904ad5 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -599,18 +599,18 @@ static struct platform_device fsi_device = { }, }; +/* + * If left and right margins are not multiples of 8, + * LDHAJR will be adjusted accordingly by the LCDC + * driver. Until we start using EDID, these values + * might have to be adjusted for different monitors. + */ const static struct fb_videomode ap4evb_hdmi_modes[] = { { .name = "HDMI 720p", .xres = 1280, .yres = 720, - /* - * If left and right margins are not multiples of 8, - * LDHAJR will be adjusted accordingly by the LCDC - * driver. Until we start using EDID, these values - * might have to be adjusted for different monitors. - */ .left_margin = 200, .right_margin = 88, .hsync_len = 48, @@ -621,6 +621,35 @@ const static struct fb_videomode ap4evb_hdmi_modes[] = { .pixclock = 13468, .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, { + .name = "1280x1024", + .xres = 1280, + .yres = 1024, + + .left_margin = 144, + .right_margin = 48, + .hsync_len = 64, + + .upper_margin = 35, + .lower_margin = 5, + .vsync_len = 3, + + .pixclock = 9800, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, { + .name = "HDMI 480p", + .xres = 720, + .yres = 480, + + .left_margin = 36, + .right_margin = 18, + .hsync_len = 68, + + .upper_margin = 36, + .lower_margin = 3, + .vsync_len = 6, + .pixclock = 37037, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, }, }; -- cgit v1.2.3 From 52d5ac0073eb5faf284574bd98a25a65053eaae0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 14 Sep 2010 17:28:55 +0900 Subject: ARM: mach-shmobile: ap4evb: modify touchpanel judgment condition Current touchpanel had below 2 issues - LCDD2 pin which is needed for WVGA was changed to IRQ28_123 pin on ts_get_pendown_state - GPIO pull up on ts_init was disabled by gpio_request on ts_get_pendown_state. This mean the return value from gpio_get_value is untrusted. This patch solve these issues Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 38 ++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 005337904ad5..3dd76f0106ca 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -834,11 +834,45 @@ static void __init gpio_no_direction(u32 addr) } /* TouchScreen */ +#ifdef CONFIG_AP4EVB_QHD +# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 +# define GPIO_TSC_PORT GPIO_PORT123 +#else /* WVGA */ +# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40 +# define GPIO_TSC_PORT GPIO_PORT40 +#endif + #define IRQ28 evt2irq(0x3380) /* IRQ28A */ #define IRQ7 evt2irq(0x02e0) /* IRQ7A */ +static int ts_get_pendown_state(void) +{ + int val; + + gpio_free(GPIO_TSC_IRQ); + + gpio_request(GPIO_TSC_PORT, NULL); + + gpio_direction_input(GPIO_TSC_PORT); + + val = gpio_get_value(GPIO_TSC_PORT); + + gpio_request(GPIO_TSC_IRQ, NULL); + + return !val; +} + +static int ts_init(void) +{ + gpio_request(GPIO_TSC_IRQ, NULL); + + return 0; +} + static struct tsc2007_platform_data tsc2007_info = { .model = 2007, - .x_plate_ohms = 1000, + .x_plate_ohms = 180, + .get_pendown_state = ts_get_pendown_state, + .init_platform_hw = ts_init, }; static struct i2c_board_info tsc_device = { @@ -1015,7 +1049,6 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_KEYIN4, NULL); /* enable TouchScreen */ - gpio_request(GPIO_FN_IRQ28_123, NULL); set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); tsc_device.irq = IRQ28; @@ -1072,7 +1105,6 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].lcd_size_cfg.height = 91; /* enable TouchScreen */ - gpio_request(GPIO_FN_IRQ7_40, NULL); set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); tsc_device.irq = IRQ7; -- cgit v1.2.3 From 5d8e3451d172441ac9f4aa1d0ff8706412bc7deb Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Sep 2010 06:38:07 +0000 Subject: ARM: mach-shmobile: modify wrong array size of div6_reparent_clks Signed-off-by: Kuninori Morimoto Reviewed-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7372.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 759468992ad2..ea384e1a1e97 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -548,7 +548,7 @@ void __init sh7372_clock_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_NR); + ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR); if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); -- cgit v1.2.3 From 14477095abc661a9f195ca4733bb739c54794b32 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Wed, 8 Sep 2010 12:39:46 +0300 Subject: ARM: h1940: Use gpiolib for latch access This patch adds gpiolib support for h1940 latch. With this patch it's possible to use leds-gpio and uda1380 drivers (they require gpiolib support for appropriate pins). And now it's possible to drop leds-h1940 driver. Signed-off-by: Vasily Khoruzhick Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/h1940-bluetooth.c | 13 +++-- arch/arm/mach-s3c2410/include/mach/h1940-latch.h | 57 +++++++-------------- arch/arm/mach-s3c2410/mach-h1940.c | 64 +++++++++++++++++++++--- arch/arm/plat-s3c24xx/Kconfig | 1 + 4 files changed, 87 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 8cdeb14af592..8aa2f1902a94 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -30,7 +30,7 @@ static void h1940bt_enable(int on) { if (on) { /* Power on the chip */ - h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); + gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1); /* Reset the chip */ mdelay(10); @@ -43,7 +43,7 @@ static void h1940bt_enable(int on) mdelay(10); gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); - h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); + gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0); } } @@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); if (ret) { - dev_err(&pdev->dev, "could not get GPH1\n");\ + dev_err(&pdev->dev, "could not get GPH1\n"); + return ret; + } + + ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev)); + if (ret) { + gpio_free(S3C2410_GPH(1)); + dev_err(&pdev->dev, "could not get BT_POWER\n"); return ret; } diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index d8a832729a8a..73586f20930e 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -14,51 +14,30 @@ #ifndef __ASM_ARCH_H1940_LATCH_H #define __ASM_ARCH_H1940_LATCH_H +#include -#ifndef __ASSEMBLY__ -#define H1940_LATCH ((void __force __iomem *)0xF8000000) -#else -#define H1940_LATCH 0xF8000000 -#endif - -#define H1940_PA_LATCH (S3C2410_CS2) +#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) /* SD layer latch */ -#define H1940_LATCH_SDQ1 (1<<16) -#define H1940_LATCH_LCD_P1 (1<<17) -#define H1940_LATCH_LCD_P2 (1<<18) -#define H1940_LATCH_LCD_P3 (1<<19) -#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ -#define H1940_LATCH_LED_RED (1<<21) -#define H1940_LATCH_SDQ7 (1<<22) -#define H1940_LATCH_USB_DP (1<<23) +#define H1940_LATCH_SDQ1 H1940_LATCH_GPIO(0) +#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1) +#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2) +#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3) +#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4) +#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5) +#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6) +#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7) /* CPU layer latch */ -#define H1940_LATCH_UDA_POWER (1<<24) -#define H1940_LATCH_AUDIO_POWER (1<<25) -#define H1940_LATCH_SM803_ENABLE (1<<26) -#define H1940_LATCH_LCD_P4 (1<<27) -#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ -#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ -#define H1940_LATCH_LED_GREEN (1<<30) -#define H1940_LATCH_LED_FLASH (1<<31) - -/* default settings */ - -#define H1940_LATCH_DEFAULT \ - H1940_LATCH_LCD_P4 | \ - H1940_LATCH_SM803_ENABLE | \ - H1940_LATCH_SDQ1 | \ - H1940_LATCH_LCD_P1 | \ - H1940_LATCH_LCD_P2 | \ - H1940_LATCH_LCD_P3 | \ - H1940_LATCH_MAX1698_nSHUTDOWN | \ - H1940_LATCH_CPUQ5 - -/* control functions */ - -extern void h1940_latch_control(unsigned int clear, unsigned int set); +#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8) +#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9) +#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10) +#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11) +#define H1940_LATCH_CPUQ5 H1940_LATCH_GPIO(12) +#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13) +#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) +#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) #endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 3ba3bab139d0..f0493bdbf0dc 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -59,6 +59,12 @@ #include #include +#define H1940_LATCH ((void __force __iomem *)0xF8000000) + +#define H1940_PA_LATCH S3C2410_CS2 + +#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END)) + static struct map_desc h1940_iodesc[] __initdata = { [0] = { .virtual = (unsigned long)H1940_LATCH, @@ -100,9 +106,16 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = { /* Board control latch control */ -static unsigned int latch_state = H1940_LATCH_DEFAULT; +static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) | + H1940_LATCH_BIT(H1940_LATCH_SM803_ENABLE) | + H1940_LATCH_BIT(H1940_LATCH_SDQ1) | + H1940_LATCH_BIT(H1940_LATCH_LCD_P1) | + H1940_LATCH_BIT(H1940_LATCH_LCD_P2) | + H1940_LATCH_BIT(H1940_LATCH_LCD_P3) | + H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN) | + H1940_LATCH_BIT(H1940_LATCH_CPUQ5); -void h1940_latch_control(unsigned int clear, unsigned int set) +static void h1940_latch_control(unsigned int clear, unsigned int set) { unsigned long flags; @@ -116,7 +129,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set) local_irq_restore(flags); } -EXPORT_SYMBOL_GPL(h1940_latch_control); +static inline int h1940_gpiolib_to_latch(int offset) +{ + return 1 << (offset + 16); +} + +static void h1940_gpiolib_latch_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + int latch_bit = h1940_gpiolib_to_latch(offset); + + h1940_latch_control(value ? 0 : latch_bit, + value ? latch_bit : 0); +} + +static int h1940_gpiolib_latch_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + h1940_gpiolib_latch_set(chip, offset, value); + return 0; +} + +static int h1940_gpiolib_latch_get(struct gpio_chip *chip, + unsigned offset) +{ + return (latch_state >> (offset + 16)) & 1; +} + +struct gpio_chip h1940_latch_gpiochip = { + .base = H1940_LATCH_GPIO(0), + .owner = THIS_MODULE, + .label = "H1940_LATCH", + .ngpio = 16, + .direction_output = h1940_gpiolib_latch_output, + .set = h1940_gpiolib_latch_set, + .get = h1940_gpiolib_latch_get, +}; static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) { @@ -125,10 +173,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - h1940_latch_control(0, H1940_LATCH_USB_DP); + gpio_set_value(H1940_LATCH_USB_DP, 1); break; case S3C2410_UDC_P_DISABLE : - h1940_latch_control(H1940_LATCH_USB_DP, 0); + gpio_set_value(H1940_LATCH_USB_DP, 0); break; case S3C2410_UDC_P_RESET : break; @@ -303,6 +351,8 @@ static void __init h1940_map_io(void) memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif s3c_pm_init(); + + WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -342,9 +392,11 @@ static void __init h1940_init(void) gpio_request(S3C2410_GPC(0), "LCD power"); gpio_request(S3C2410_GPC(5), "LCD power"); gpio_request(S3C2410_GPC(6), "LCD power"); - gpio_direction_input(S3C2410_GPC(6)); + gpio_request(H1940_LATCH_USB_DP, "USB pullup"); + gpio_direction_output(H1940_LATCH_USB_DP, 0); + platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 984bf66826d2..5a27b1b538f2 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA int default 128 if S3C24XX_GPIO_EXTRA128 default 64 if S3C24XX_GPIO_EXTRA64 + default 16 if ARCH_H1940 default 0 config S3C24XX_GPIO_EXTRA64 -- cgit v1.2.3 From 48cd65a6a020292e1ab5d0f5ba96571c858964e6 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 27 Sep 2010 00:27:41 +0300 Subject: ARM: h1940: Implement mmc_power function This patch implements h1940-specific set_power callback for s3cmci driver, so card power can be disabled when card is not inserted or before suspend. Without this patch PDA consumes power in suspend when card is inserted. Signed-off-by: Vasily Khoruzhick Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/h1940-latch.h | 2 +- arch/arm/mach-s3c2410/mach-h1940.c | 23 ++++++++++++++++++++--- 2 files changed, 21 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index 73586f20930e..ef7d8cf4174d 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -35,7 +35,7 @@ #define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9) #define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10) #define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11) -#define H1940_LATCH_CPUQ5 H1940_LATCH_GPIO(12) +#define H1940_LATCH_SD_POWER H1940_LATCH_GPIO(12) #define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13) #define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) #define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index f0493bdbf0dc..cc8660ec8844 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -112,8 +112,7 @@ static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) | H1940_LATCH_BIT(H1940_LATCH_LCD_P1) | H1940_LATCH_BIT(H1940_LATCH_LCD_P2) | H1940_LATCH_BIT(H1940_LATCH_LCD_P3) | - H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN) | - H1940_LATCH_BIT(H1940_LATCH_CPUQ5); + H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN); static void h1940_latch_control(unsigned int clear, unsigned int set) { @@ -247,10 +246,25 @@ static struct platform_device h1940_device_bluetooth = { .id = -1, }; +static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd) +{ + switch (power_mode) { + case MMC_POWER_OFF: + gpio_set_value(H1940_LATCH_SD_POWER, 0); + break; + case MMC_POWER_UP: + case MMC_POWER_ON: + gpio_set_value(H1940_LATCH_SD_POWER, 1); + break; + default: + break; + }; +} + static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = { .gpio_detect = S3C2410_GPF(5), .gpio_wprotect = S3C2410_GPH(8), - .set_power = NULL, + .set_power = h1940_set_mmc_power, .ocr_avail = MMC_VDD_32_33, }; @@ -397,6 +411,9 @@ static void __init h1940_init(void) gpio_request(H1940_LATCH_USB_DP, "USB pullup"); gpio_direction_output(H1940_LATCH_USB_DP, 0); + gpio_request(H1940_LATCH_SD_POWER, "SD power"); + gpio_direction_output(H1940_LATCH_SD_POWER, 0); + platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } -- cgit v1.2.3 From ecab01d46c68370f347b2c1125cb90070813c799 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 27 Sep 2010 00:17:48 +0300 Subject: ARM: rx1950: Add battery device This patch adds registration of appropriate device for s3c-adc-battery driver, so battery monitoring and charging are available on RX1950 PDA now. Signed-off-by: Vasily Khoruzhick Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-rx1950.c | 160 ++++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 142d1f921176..a4d8c15da251 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -25,8 +25,10 @@ #include #include #include +#include #include #include +#include #include #include @@ -127,6 +129,162 @@ static struct s3c2410fb_display rx1950_display = { }; +static int power_supply_init(struct device *dev) +{ + return gpio_request(S3C2410_GPF(2), "cable plugged"); +} + +static int rx1950_is_ac_online(void) +{ + return !gpio_get_value(S3C2410_GPF(2)); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(S3C2410_GPF(2)); +} + +static char *rx1950_supplicants[] = { + "main-battery" +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = rx1950_is_ac_online, + .exit = power_supply_exit, + .supplied_to = rx1950_supplicants, + .num_supplicants = ARRAY_SIZE(rx1950_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | + IORESOURCE_IRQ_HIGHEDGE, + .start = IRQ_EINT2, + .end = IRQ_EINT2, + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = + &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +static const struct s3c_adc_bat_thresh bat_lut_noac[] = { + { .volt = 4100, .cur = 156, .level = 100}, + { .volt = 4050, .cur = 156, .level = 95}, + { .volt = 4025, .cur = 141, .level = 90}, + { .volt = 3995, .cur = 144, .level = 85}, + { .volt = 3957, .cur = 162, .level = 80}, + { .volt = 3931, .cur = 147, .level = 75}, + { .volt = 3902, .cur = 147, .level = 70}, + { .volt = 3863, .cur = 153, .level = 65}, + { .volt = 3838, .cur = 150, .level = 60}, + { .volt = 3800, .cur = 153, .level = 55}, + { .volt = 3765, .cur = 153, .level = 50}, + { .volt = 3748, .cur = 172, .level = 45}, + { .volt = 3740, .cur = 153, .level = 40}, + { .volt = 3714, .cur = 175, .level = 35}, + { .volt = 3710, .cur = 156, .level = 30}, + { .volt = 3963, .cur = 156, .level = 25}, + { .volt = 3672, .cur = 178, .level = 20}, + { .volt = 3651, .cur = 178, .level = 15}, + { .volt = 3629, .cur = 178, .level = 10}, + { .volt = 3612, .cur = 162, .level = 5}, + { .volt = 3605, .cur = 162, .level = 0}, +}; + +static const struct s3c_adc_bat_thresh bat_lut_acin[] = { + { .volt = 4200, .cur = 0, .level = 100}, + { .volt = 4190, .cur = 0, .level = 99}, + { .volt = 4178, .cur = 0, .level = 95}, + { .volt = 4110, .cur = 0, .level = 70}, + { .volt = 4076, .cur = 0, .level = 65}, + { .volt = 4046, .cur = 0, .level = 60}, + { .volt = 4021, .cur = 0, .level = 55}, + { .volt = 3999, .cur = 0, .level = 50}, + { .volt = 3982, .cur = 0, .level = 45}, + { .volt = 3965, .cur = 0, .level = 40}, + { .volt = 3957, .cur = 0, .level = 35}, + { .volt = 3948, .cur = 0, .level = 30}, + { .volt = 3936, .cur = 0, .level = 25}, + { .volt = 3927, .cur = 0, .level = 20}, + { .volt = 3906, .cur = 0, .level = 15}, + { .volt = 3880, .cur = 0, .level = 10}, + { .volt = 3829, .cur = 0, .level = 5}, + { .volt = 3820, .cur = 0, .level = 0}, +}; + +int rx1950_bat_init(void) +{ + int ret; + + ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1"); + if (ret) + goto err_gpio1; + ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2"); + if (ret) + goto err_gpio2; + + return 0; + +err_gpio2: + gpio_free(S3C2410_GPJ(2)); +err_gpio1: + return ret; +} + +void rx1950_bat_exit(void) +{ + gpio_free(S3C2410_GPJ(2)); + gpio_free(S3C2410_GPJ(3)); +} + +void rx1950_enable_charger(void) +{ + gpio_direction_output(S3C2410_GPJ(2), 1); + gpio_direction_output(S3C2410_GPJ(3), 1); +} + +void rx1950_disable_charger(void) +{ + gpio_direction_output(S3C2410_GPJ(2), 0); + gpio_direction_output(S3C2410_GPJ(3), 0); +} + +static struct s3c_adc_bat_pdata rx1950_bat_cfg = { + .init = rx1950_bat_init, + .exit = rx1950_bat_exit, + .enable_charger = rx1950_enable_charger, + .disable_charger = rx1950_disable_charger, + .gpio_charge_finished = S3C2410_GPF(3), + .lut_noac = bat_lut_noac, + .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), + .lut_acin = bat_lut_acin, + .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), + .volt_channel = 0, + .current_channel = 1, + .volt_mult = 4235, + .current_mult = 2900, + .internal_impedance = 200, +}; + +static struct platform_device rx1950_battery = { + .name = "s3c-adc-battery", + .id = -1, + .dev = { + .parent = &s3c_device_adc.dev, + .platform_data = &rx1950_bat_cfg, + }, +}; + static struct s3c2410fb_mach_info rx1950_lcd_cfg = { .displays = &rx1950_display, .num_displays = 1, @@ -503,6 +661,8 @@ static struct platform_device *rx1950_devices[] __initdata = { &s3c_device_timer[1], &rx1950_backlight, &rx1950_device_gpiokeys, + &power_supply, + &rx1950_battery, }; static struct clk *rx1950_clocks[] __initdata = { -- cgit v1.2.3 From 9c1a47cf1e8978394399198b6b296c10f3a8dbfe Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Tue, 7 Sep 2010 17:32:25 +0300 Subject: ARM: rx1950: Add LEDs support Signed-off-by: Vasily Khoruzhick Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-rx1950.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index a4d8c15da251..adfbb3046c86 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -259,6 +260,37 @@ void rx1950_disable_charger(void) gpio_direction_output(S3C2410_GPJ(3), 0); } +static struct gpio_led rx1950_leds_desc[] = { + { + .name = "Green", + .default_trigger = "main-battery-charging-or-full", + .gpio = S3C2410_GPA(6), + }, + { + .name = "Red", + .default_trigger = "main-battery-full", + .gpio = S3C2410_GPA(7), + }, + { + .name = "Blue", + .default_trigger = "rx1950-acx-mem", + .gpio = S3C2410_GPA(11), + }, +}; + +static struct gpio_led_platform_data rx1950_leds_pdata = { + .num_leds = ARRAY_SIZE(rx1950_leds_desc), + .leds = rx1950_leds_desc, +}; + +static struct platform_device rx1950_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &rx1950_leds_pdata, + }, +}; + static struct s3c_adc_bat_pdata rx1950_bat_cfg = { .init = rx1950_bat_init, .exit = rx1950_bat_exit, @@ -663,6 +695,7 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_device_gpiokeys, &power_supply, &rx1950_battery, + &rx1950_leds, }; static struct clk *rx1950_clocks[] __initdata = { -- cgit v1.2.3 From 2cc857ffec1e7540155c5ab90e622e5acc28d136 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Tue, 7 Sep 2010 17:32:26 +0300 Subject: ARM: rx1950: Add UDA1380 to i2c devices list Signed-off-by: Vasily Khoruzhick Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-rx1950.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index adfbb3046c86..6d676a798226 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -58,6 +59,8 @@ #include #include +#include + #define LCD_PWM_PERIOD 192960 #define LCD_PWM_DUTY 127353 @@ -671,11 +674,17 @@ static struct platform_device rx1950_device_gpiokeys = { .dev.platform_data = &rx1950_gpio_keys_data, }; -static struct s3c2410_platform_i2c rx1950_i2c_data = { - .flags = 0, - .slave_addr = 0x42, - .frequency = 400 * 1000, - .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +static struct uda1380_platform_data uda1380_info = { + .gpio_power = S3C2410_GPJ(0), + .gpio_reset = S3C2410_GPD(0), + .dac_clk = UDA1380_DAC_CLK_SYSCLK, +}; + +static struct i2c_board_info rx1950_i2c_devices[] = { + { + I2C_BOARD_INFO("uda1380", 0x1a), + .platform_data = &uda1380_info, + }, }; static struct platform_device *rx1950_devices[] __initdata = { @@ -683,6 +692,7 @@ static struct platform_device *rx1950_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, + &s3c_device_pcm, &s3c_device_usbgadget, &s3c_device_rtc, &s3c_device_nand, @@ -731,7 +741,7 @@ static void __init rx1950_init_machine(void) s3c24xx_udc_set_platdata(&rx1950_udc_cfg); s3c24xx_ts_set_platdata(&rx1950_ts_cfg); s3c24xx_mci_set_platdata(&rx1950_mmc_cfg); - s3c_i2c0_set_platdata(&rx1950_i2c_data); + s3c_i2c0_set_platdata(NULL); s3c_nand_set_platdata(&rx1950_nand_info); /* Turn off suspend on both USB ports, and switch the @@ -762,6 +772,9 @@ static void __init rx1950_init_machine(void) WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power")); platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); + + i2c_register_board_info(0, rx1950_i2c_devices, + ARRAY_SIZE(rx1950_i2c_devices)); } /* H1940 and RX3715 need to reserve this for suspend */ -- cgit v1.2.3 From 46f12936fd2945ffaf774e728fe5044f06ed5574 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 3 Oct 2010 04:24:42 +0000 Subject: sh: fix an ms7724se compile breakage Fix a compile breakage, caused by my own careless copy-paste. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 3099c36759ad..fe208d6c8ed0 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -148,14 +148,14 @@ const static struct fb_videomode lcdc_720p_modes[] = { { .name = "LB070WV1", .sync = 0, /* hsync and vsync are active low */ - .xres = 1280; - .yres = 720; - .left_margin = 220; - .right_margin = 110; - .hsync_len = 40; - .upper_margin = 20; - .lower_margin = 5; - .vsync_len = 5; + .xres = 1280, + .yres = 720, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, }, }; @@ -163,14 +163,14 @@ const static struct fb_videomode lcdc_vga_modes[] = { { .name = "LB070WV1", .sync = 0, /* hsync and vsync are active low */ - .xres = 640; - .yres = 480; - .left_margin = 105; - .right_margin = 50; - .hsync_len = 96; - .upper_margin = 33; - .lower_margin = 10; - .vsync_len = 2; + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 50, + .hsync_len = 96, + .upper_margin = 33, + .lower_margin = 10, + .vsync_len = 2, }, }; -- cgit v1.2.3 From 532daaa1108390c5c0070ab6d32bd20b53ee4e41 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Mon, 4 Oct 2010 10:39:29 +0000 Subject: arm/shmobile: remove duplicated include Remove duplicated include. Signed-off-by: Nicolas Kaiser Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 3dd76f0106ca..943cc21e33b2 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 934e40781aa92dae0b9d753d7de4a743c96b9bd2 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Oct 2010 07:22:11 +0000 Subject: ARM: shmobile: break out sh7372 platform devices This patch introduces sh7372_late_devices which should include all regular processor specific platform devices. Early platform devices for console and timers should be put on the sh7372_early_devices list, all other devices should be on sh7372_late_devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/setup-sh7372.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index f6cdf76a3a3d..68c8d6c67f4e 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -526,6 +526,9 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif5_device, &scif6_device, &cmt10_device, +}; + +static struct platform_device *sh7372_late_devices[] __initdata = { &iic0_device, &iic1_device, &dma0_device, @@ -537,6 +540,9 @@ void __init sh7372_add_standard_devices(void) { platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); + + platform_add_devices(sh7372_late_devices, + ARRAY_SIZE(sh7372_late_devices)); } void __init sh7372_add_early_devices(void) -- cgit v1.2.3 From 0fb0834b36c2a952640883cd4b68f01d0843eca6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Oct 2010 07:39:18 +0000 Subject: ARM: shmobile: make AP4EVB MMCIF resource string consistent Just use MMCIF as name to match the sh7372 data sheet. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 943cc21e33b2..aaac8b09047b 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -237,7 +237,7 @@ static struct platform_device smc911x_device = { /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { - .name = "SH_MMCIF", + .name = "MMCIF", .start = 0xE6BD0000, .end = 0xE6BD00FF, .flags = IORESOURCE_MEM, -- cgit v1.2.3 From 90e09a59110949bda40c13b4e5925f3acd3597b0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Oct 2010 07:29:31 +0000 Subject: ARM: shmobile: use device name for timer clocks Move SH-Mobile ARM systems over from the legacy "clk" member of struct sh_timer_config to using the device name and clkdev for clock matching. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7367.c | 2 +- arch/arm/mach-shmobile/clock-sh7372.c | 2 +- arch/arm/mach-shmobile/clock-sh7377.c | 2 +- arch/arm/mach-shmobile/setup-sh7367.c | 1 - arch/arm/mach-shmobile/setup-sh7372.c | 1 - arch/arm/mach-shmobile/setup-sh7377.c | 1 - 6 files changed, 3 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index b6454c9f2abb..9f78729098f2 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -321,7 +321,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */ CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */ - CLKDEV_CON_ID("cmt1", &mstp_clks[SYMSTP229]), /* CMT10 */ + CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */ diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index ea384e1a1e97..3ab190ab7d40 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -516,7 +516,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */ diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c index e007c28cf0a8..f91395aeb9ab 100644 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -333,7 +333,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ - CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */ diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index 3148c11a550e..003008c18360 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -154,7 +154,6 @@ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clk = "r_clk", .clockevent_rating = 125, .clocksource_rating = 125, }; diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 68c8d6c67f4e..ed1324f8f9b7 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -158,7 +158,6 @@ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clk = "cmt1", .clockevent_rating = 125, .clocksource_rating = 125, }; diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index bb4adf17dbf4..575dbd6c2f1d 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -172,7 +172,6 @@ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clk = "r_clk", .clockevent_rating = 125, .clocksource_rating = 125, }; -- cgit v1.2.3 From 685e4080c62b4b5c6f67c7b088e416e98d06f7e6 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 15 Oct 2010 05:14:54 +0000 Subject: ARM: mach-shmobile: clock-sh7372: add sh7372_ prefix to global clocks This patch also registered global extal clocks to sh7372.h Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 14 +++++++------- arch/arm/mach-shmobile/clock-sh7372.c | 24 ++++++++++++------------ arch/arm/mach-shmobile/include/mach/sh7372.h | 8 +++++--- 3 files changed, 24 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aaac8b09047b..f879eb3c3427 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -780,22 +780,22 @@ static int __init hdmi_init_pm_clock(void) goto out; } - ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk); + ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk); if (ret < 0) { - pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount); + pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount); goto out; } - pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk)); + pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk)); - rate = clk_round_rate(&pllc2_clk, 594000000); + rate = clk_round_rate(&sh7372_pllc2_clk, 594000000); if (rate < 0) { pr_err("Cannot get suitable rate: %ld\n", rate); ret = rate; goto out; } - ret = clk_set_rate(&pllc2_clk, rate); + ret = clk_set_rate(&sh7372_pllc2_clk, rate); if (ret < 0) { pr_err("Cannot set rate %ld: %d\n", rate, ret); goto out; @@ -803,7 +803,7 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); - ret = clk_set_parent(hdmi_ick, &pllc2_clk); + ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); if (ret < 0) { pr_err("Cannot set HDMI parent: %d\n", ret); goto out; @@ -1132,7 +1132,7 @@ static void __init ap4evb_timer_init(void) shmobile_timer.init(); /* External clock source */ - clk_set_rate(&dv_clki_clk, 27000000); + clk_set_rate(&sh7372_dv_clki_clk, 27000000); } static struct sys_timer ap4evb_timer = { diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 3ab190ab7d40..50c3971d3dcb 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -51,7 +51,7 @@ #define SMSTPCR4 0xe6150140 /* Platforms must set frequency on their DV_CLKI pin */ -struct clk dv_clki_clk = { +struct clk sh7372_dv_clki_clk = { }; /* Fixed 32 KHz root clock from EXTALR pin */ @@ -86,9 +86,9 @@ static struct clk_ops div2_clk_ops = { }; /* Divide dv_clki by two */ -struct clk dv_clki_div2_clk = { +struct clk sh7372_dv_clki_div2_clk = { .ops = &div2_clk_ops, - .parent = &dv_clki_clk, + .parent = &sh7372_dv_clki_clk, }; /* Divide extal1 by two */ @@ -150,7 +150,7 @@ static struct clk pllc1_div2_clk = { static struct clk *pllc2_parent[] = { [0] = &extal1_div2_clk, [1] = &extal2_div2_clk, - [2] = &dv_clki_div2_clk, + [2] = &sh7372_dv_clki_div2_clk, }; /* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */ @@ -284,7 +284,7 @@ static struct clk_ops pllc2_clk_ops = { .set_parent = pllc2_set_parent, }; -struct clk pllc2_clk = { +struct clk sh7372_pllc2_clk = { .ops = &pllc2_clk_ops, .parent = &extal1_div2_clk, .freq_table = pllc2_freq_table, @@ -293,18 +293,18 @@ struct clk pllc2_clk = { }; static struct clk *main_clks[] = { - &dv_clki_clk, + &sh7372_dv_clki_clk, &r_clk, &sh7372_extal1_clk, &sh7372_extal2_clk, - &dv_clki_div2_clk, + &sh7372_dv_clki_div2_clk, &extal1_div2_clk, &extal2_div2_clk, &extal2_div4_clk, &pllc0_clk, &pllc1_clk, &pllc1_div2_clk, - &pllc2_clk, + &sh7372_pllc2_clk, }; static void div4_kick(struct clk *clk) @@ -382,8 +382,8 @@ enum { DIV6_HDMI, DIV6_REPARENT_NR }; /* Indices are important - they are the actual src selecting values */ static struct clk *hdmi_parent[] = { [0] = &pllc1_div2_clk, - [1] = &pllc2_clk, - [2] = &dv_clki_clk, + [1] = &sh7372_pllc2_clk, + [2] = &sh7372_dv_clki_clk, [3] = NULL, /* pllc2_div4 not implemented yet */ }; @@ -448,7 +448,7 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main clocks */ - CLKDEV_CON_ID("dv_clki_div2_clk", &dv_clki_div2_clk), + CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk), CLKDEV_CON_ID("r_clk", &r_clk), CLKDEV_CON_ID("extal1", &sh7372_extal1_clk), CLKDEV_CON_ID("extal2", &sh7372_extal2_clk), @@ -458,7 +458,7 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc0_clk", &pllc0_clk), CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), + CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 33e9700ded7e..9838fcf03083 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -457,8 +457,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, }; -extern struct clk dv_clki_clk; -extern struct clk dv_clki_div2_clk; -extern struct clk pllc2_clk; +extern struct clk sh7372_extal1_clk; +extern struct clk sh7372_extal2_clk; +extern struct clk sh7372_dv_clki_clk; +extern struct clk sh7372_dv_clki_div2_clk; +extern struct clk sh7372_pllc2_clk; #endif /* __ASM_SH7372_H__ */ -- cgit v1.2.3 From 69ce8aa4925a54de192cf64e99abd294586c1984 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 15 Oct 2010 05:15:05 +0000 Subject: ARM: mach-shmobile: clock-sh7372: FSI parent select support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 70 ++++++++++++++++------------ arch/arm/mach-shmobile/clock-sh7372.c | 45 ++++++++++++++---- arch/arm/mach-shmobile/include/mach/sh7372.h | 2 + 3 files changed, 80 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index f879eb3c3427..1e7beee79086 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -546,27 +546,6 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) -#define FSIACKCR 0xE6150018 -static void fsiackcr_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsiackcr_clk_ops = { - .init = fsiackcr_init, -}; - -static struct clk fsiackcr_clk = { - .ops = &fsiackcr_clk_ops, - .enable_reg = (void __iomem *)FSIACKCR, - .rate = 0, /* unknown */ -}; - static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | @@ -817,6 +796,47 @@ out: device_initcall(hdmi_init_pm_clock); +#define FSIACK_DUMMY_RATE 48000 +static int __init fsi_init_pm_clock(void) +{ + struct clk *fsia_ick; + int ret; + + /* + * FSIACK is connected to AK4642, + * and the rate is depend on playing sound rate. + * So, set dummy rate (= 48k) here + */ + ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); + if (ret < 0) { + pr_err("Cannot set FSIACK dummy rate: %d\n", ret); + return ret; + } + + fsia_ick = clk_get(&fsi_device.dev, "icka"); + if (IS_ERR(fsia_ick)) { + ret = PTR_ERR(fsia_ick); + pr_err("Cannot get FSI ICK: %d\n", ret); + return ret; + } + + ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); + if (ret < 0) { + pr_err("Cannot set FSI-A parent: %d\n", ret); + goto out; + } + + ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); + if (ret < 0) + pr_err("Cannot set FSI-A rate: %d\n", ret); + +out: + clk_put(fsia_ick); + + return ret; +} +device_initcall(fsi_init_pm_clock); + /* * FIXME !! * @@ -1007,14 +1027,6 @@ static void __init ap4evb_init(void) clk_put(clk); } - /* change parent of FSI A */ - clk = clk_get(NULL, "fsia_clk"); - if (!IS_ERR(clk)) { - clk_register(&fsiackcr_clk); - clk_set_parent(clk, &fsiackcr_clk); - clk_put(clk); - } - /* * set irq priority, to avoid sound chopping * when NFS rootfs is used diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 50c3971d3dcb..4557084a2f0f 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -292,6 +292,13 @@ struct clk sh7372_pllc2_clk = { .parent_num = ARRAY_SIZE(pllc2_parent), }; +/* External input clock (pin name: FSIACK/FSIBCK ) */ +struct clk sh7372_fsiack_clk = { +}; + +struct clk sh7372_fsibck_clk = { +}; + static struct clk *main_clks[] = { &sh7372_dv_clki_clk, &r_clk, @@ -305,6 +312,8 @@ static struct clk *main_clks[] = { &pllc1_clk, &pllc1_div2_clk, &sh7372_pllc2_clk, + &sh7372_fsiack_clk, + &sh7372_fsibck_clk, }; static void div4_kick(struct clk *clk) @@ -357,7 +366,7 @@ static struct clk div4_clks[DIV4_NR] = { }; enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO, - DIV6_FSIA, DIV6_FSIB, DIV6_SUB, DIV6_SPU, + DIV6_SUB, DIV6_SPU, DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P, DIV6_NR }; @@ -367,8 +376,6 @@ static struct clk div6_clks[DIV6_NR] = { [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0), [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0), - [DIV6_FSIA] = SH_CLK_DIV6(&pllc1_div2_clk, FSIACKCR, 0), - [DIV6_FSIB] = SH_CLK_DIV6(&pllc1_div2_clk, FSIBCKCR, 0), [DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0), [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0), @@ -377,7 +384,7 @@ static struct clk div6_clks[DIV6_NR] = { [DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0), }; -enum { DIV6_HDMI, DIV6_REPARENT_NR }; +enum { DIV6_HDMI, DIV6_FSIA, DIV6_FSIB, DIV6_REPARENT_NR }; /* Indices are important - they are the actual src selecting values */ static struct clk *hdmi_parent[] = { @@ -387,9 +394,27 @@ static struct clk *hdmi_parent[] = { [3] = NULL, /* pllc2_div4 not implemented yet */ }; +static struct clk *fsiackcr_parent[] = { + [0] = &pllc1_div2_clk, + [1] = &sh7372_pllc2_clk, + [2] = &sh7372_fsiack_clk, /* external input for FSI A */ + [3] = NULL, /* setting prohibited */ +}; + +static struct clk *fsibckcr_parent[] = { + [0] = &pllc1_div2_clk, + [1] = &sh7372_pllc2_clk, + [2] = &sh7372_fsibck_clk, /* external input for FSI B */ + [3] = NULL, /* setting prohibited */ +}; + static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { [DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0, hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2), + [DIV6_FSIA] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIACKCR, 0, + fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2), + [DIV6_FSIB] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIBCKCR, 0, + fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2), }; enum { MSTP001, @@ -429,7 +454,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */ + [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ @@ -445,6 +470,7 @@ static struct clk mstp_clks[MSTP_NR] = { #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } +#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } static struct clk_lookup lookups[] = { /* main clocks */ @@ -483,8 +509,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FSIA]), - CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FSIB]), + CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]), + CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), @@ -531,7 +557,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ - {.con_id = "ick", .dev_id = "sh-mobile-hdmi", .clk = &div6_reparent_clks[DIV6_HDMI]}, + + CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), + CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), + CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), }; void __init sh7372_clock_init(void) diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 9838fcf03083..147775a94bce 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -462,5 +462,7 @@ extern struct clk sh7372_extal2_clk; extern struct clk sh7372_dv_clki_clk; extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; +extern struct clk sh7372_fsiack_clk; +extern struct clk sh7372_fsibck_clk; #endif /* __ASM_SH7372_H__ */ -- cgit v1.2.3 From 402f33154ee12de80fafa7f780d338d90cecbb5f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 15 Oct 2010 07:53:56 +0000 Subject: ARM: mach-shmobile: remove videomodes from ap4evb platform data Now that HDMI videomodes have become optional, they can be safely removed from ap4evb platform data, since anyway 720p seems to be the best supported mode. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 56 ----------------------------------- 1 file changed, 56 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1e7beee79086..d21637d0f6dd 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -577,60 +577,6 @@ static struct platform_device fsi_device = { }, }; -/* - * If left and right margins are not multiples of 8, - * LDHAJR will be adjusted accordingly by the LCDC - * driver. Until we start using EDID, these values - * might have to be adjusted for different monitors. - */ -const static struct fb_videomode ap4evb_hdmi_modes[] = { - { - .name = "HDMI 720p", - .xres = 1280, - .yres = 720, - - .left_margin = 200, - .right_margin = 88, - .hsync_len = 48, - - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - - .pixclock = 13468, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, - }, { - .name = "1280x1024", - .xres = 1280, - .yres = 1024, - - .left_margin = 144, - .right_margin = 48, - .hsync_len = 64, - - .upper_margin = 35, - .lower_margin = 5, - .vsync_len = 3, - - .pixclock = 9800, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, - }, { - .name = "HDMI 480p", - .xres = 720, - .yres = 480, - - .left_margin = 36, - .right_margin = 18, - .hsync_len = 68, - - .upper_margin = 36, - .lower_margin = 3, - .vsync_len = 6, - .pixclock = 37037, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, - }, -}; - static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { @@ -639,8 +585,6 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, - .lcd_cfg = ap4evb_hdmi_modes, - .num_cfg = ARRAY_SIZE(ap4evb_hdmi_modes), } }; -- cgit v1.2.3 From c6c049ecbccd61fae2e58fe5e2fdd369d87f3716 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 14 Oct 2010 06:57:25 +0000 Subject: ARM: mach-shmobile: add TMU platform data for sh7372 This patch adds support for the two first channels of the TMU0 timer block on sh7372. One channel is used for clock event, the other for clock source. Signed-off-by: Magnus Damm Tested-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7372.c | 5 ++- arch/arm/mach-shmobile/setup-sh7372.c | 63 +++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 4557084a2f0f..8565aefa21fd 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -419,7 +419,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { enum { MSTP001, MSTP131, MSTP130, - MSTP129, MSTP128, MSTP127, MSTP126, + MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP117, MSTP116, MSTP106, MSTP101, MSTP100, MSTP223, @@ -439,6 +439,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */ [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */ + [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */ [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ @@ -527,6 +528,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */ + CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ + CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index ed1324f8f9b7..564a6d0be473 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -185,6 +185,67 @@ static struct platform_device cmt10_device = { .num_resources = ARRAY_SIZE(cmt10_resources), }; +/* TMU */ +static struct sh_timer_config tmu00_platform_data = { + .name = "TMU00", + .channel_offset = 0x4, + .timer_bit = 0, + .clockevent_rating = 200, +}; + +static struct resource tmu00_resources[] = { + [0] = { + .name = "TMU00", + .start = 0xfff60008, + .end = 0xfff60013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0xe80), /* TMU_TUNI0 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu00_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu00_platform_data, + }, + .resource = tmu00_resources, + .num_resources = ARRAY_SIZE(tmu00_resources), +}; + +static struct sh_timer_config tmu01_platform_data = { + .name = "TMU01", + .channel_offset = 0x10, + .timer_bit = 1, + .clocksource_rating = 200, +}; + +static struct resource tmu01_resources[] = { + [0] = { + .name = "TMU01", + .start = 0xfff60014, + .end = 0xfff6001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0xea0), /* TMU_TUNI1 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu01_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu01_platform_data, + }, + .resource = tmu01_resources, + .num_resources = ARRAY_SIZE(tmu01_resources), +}; + /* I2C */ static struct resource iic0_resources[] = { [0] = { @@ -525,6 +586,8 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif5_device, &scif6_device, &cmt10_device, + &tmu00_device, + &tmu01_device, }; static struct platform_device *sh7372_late_devices[] __initdata = { -- cgit v1.2.3 From 66ad4eea7ec50fe131755c80058b1157d160294d Mon Sep 17 00:00:00 2001 From: Atul Dahiya Date: Mon, 18 Oct 2010 19:53:34 +0900 Subject: ARM: S3C24XX: Fix nand partition table for s3c24XX This patch fixes the partition table as existing partition table have last partition size fixed and can't utilize available memory proprly if size is more than 64M. Signed-off-by: Atul Dahiya Signed-off-by: Sangbeom Kim Signed-off-by: Kukjin Kim --- arch/arm/plat-s3c24xx/common-smdk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 7b44d0c592b5..bcc43f346272 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -147,7 +147,7 @@ static struct mtd_partition smdk_default_nand_part[] = { [7] = { .name = "S3C2410 flash partition 7", .offset = SZ_1M * 48, - .size = SZ_16M, + .size = MTDPART_SIZ_FULL, } }; -- cgit v1.2.3 From ef3f2dd4810cca5bf5b1d3648968b50fb267d5e2 Mon Sep 17 00:00:00 2001 From: Atul Dahiya Date: Mon, 18 Oct 2010 19:56:45 +0900 Subject: ARM: SAMSUNG: Add setname core function for S3C24XX NAND This patch replaces the device name assignment method from string assignment to set_name method for all s3c24xx machines and adds device core file. Signed-off-by: Atul Dahiya Signed-off-by: Sangbeom Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2412/s3c2412.c | 3 ++- arch/arm/mach-s3c2416/s3c2416.c | 3 ++- arch/arm/mach-s3c2440/s3c244x.c | 3 ++- arch/arm/mach-s3c2443/s3c2443.c | 3 ++- arch/arm/plat-samsung/include/plat/nand-core.h | 28 ++++++++++++++++++++++++++ 5 files changed, 36 insertions(+), 4 deletions(-) create mode 100644 arch/arm/plat-samsung/include/plat/nand-core.h (limited to 'arch') diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index bef39f77729d..4c6df51ddf33 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -51,6 +51,7 @@ #include #include #include +#include #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; @@ -92,7 +93,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) /* rename devices that are s3c2412/s3c2413 specific */ s3c_device_sdi.name = "s3c2412-sdi"; s3c_device_lcd.name = "s3c2412-lcd"; - s3c_device_nand.name = "s3c2412-nand"; + s3c_nand_setname("s3c2412-nand"); /* alter IRQ of SDI controller */ diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index bc30245e133b..620718939628 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -56,6 +56,7 @@ #include #include +#include static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,7 +101,7 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); - s3c_device_nand.name = "s3c2416-nand"; + s3c_nand_setname("s3c2416-nand"); } /* s3c2416_map_io diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 5e4a97e76533..90c1707b9c95 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -44,6 +44,7 @@ #include #include #include +#include static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), @@ -68,7 +69,7 @@ void __init s3c244x_map_io(void) s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c0.name = "s3c2440-i2c"; - s3c_device_nand.name = "s3c2440-nand"; + s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; } diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index 839b6b2ced74..33d18dd1ebd5 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -36,6 +36,7 @@ #include #include #include +#include static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -62,7 +63,7 @@ int __init s3c2443_init(void) s3c24xx_reset_hook = s3c2443_hard_reset; - s3c_device_nand.name = "s3c2412-nand"; + s3c_nand_setname("s3c2412-nand"); s3c_fb_setname("s3c2443-fb"); /* change WDT IRQ number */ diff --git a/arch/arm/plat-samsung/include/plat/nand-core.h b/arch/arm/plat-samsung/include/plat/nand-core.h new file mode 100644 index 000000000000..6de20789a95e --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/nand-core.h @@ -0,0 +1,28 @@ +/* arch/arm/plat-samsung/include/plat/nand-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S3C - Nand Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_NAND_CORE_H +#define __ASM_ARCH_NAND_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_nand_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_NAND + s3c_device_nand.name = name; +#endif +} + +#endif /* __ASM_ARCH_NAND_CORE_H */ -- cgit v1.2.3 From 4bc778661a86722b2c1128dd03851fa013ef26de Mon Sep 17 00:00:00 2001 From: Atul Dahiya Date: Mon, 18 Oct 2010 19:56:49 +0900 Subject: ARM: S3C2416: Change S3C2416 NAND platform device name This patch changes the platform device name from 's3c2416-nand' to 's3c2412-nand' so that S3C2416 can reuse the nand functionality available on S3C2412. Signed-off-by: Atul Dahiya Signed-off-by: Sangbeom Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2416/s3c2416.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 620718939628..63f39cdc0972 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -101,7 +101,7 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); - s3c_nand_setname("s3c2416-nand"); + s3c_nand_setname("s3c2412-nand"); } /* s3c2416_map_io -- cgit v1.2.3 From c115f67c03e468f18431840a97279cd3bfee8ad7 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Tue, 19 Oct 2010 13:52:29 +0900 Subject: ARM: S3C64XX: add frame buffer support for mach-real6410 Add support for frame buffer device for mach-real6410. Patch also adds support for feature string parsing for real6410. The feature string is kernel command line passed and currently lets select only LCD configuration. At the moment there is support for two LCD configurations - 4.3" and 7.0". Feature parser is mach-mini2440 based. Signed-off-by: Darius Augulis Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/Kconfig | 2 + arch/arm/mach-s3c64xx/mach-real6410.c | 146 ++++++++++++++++++++++++++++++++-- 2 files changed, 143 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 1e4d78af7d84..3bbd4184361d 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -104,6 +104,8 @@ config MACH_REAL6410 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C64XX_SETUP_SDHCI + select S3C_DEV_FB + select S3C64XX_SETUP_FB_24BPP help Machine support for the CoreWind REAL6410 diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index e130379ba0e8..bed75d221329 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -12,24 +12,35 @@ * */ -#include -#include +#include #include +#include +#include +#include #include -#include #include -#include #include +#include +#include + #include #include #include + #include -#include +#include +#include +#include #include +#include + #include #include +#include #include +#include