summaryrefslogtreecommitdiff
path: root/kernel/trace
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31kernel: Fix files explicitly needing EXPORT_SYMBOL infrastructurePaul Gortmaker1-0/+1
These files were getting <linux/module.h> via an implicit non-obvious path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31kernel: Add <linux/module.h> to files using it implicitlyPaul Gortmaker2-0/+2
These files are doing things like module_put and try_module_get so they need to call out the module.h for explicit inclusion, rather than getting it via <linux/device.h> which we ideally want to remove the module.h inclusion from. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-26Merge branch 'perf-core-for-linus' of ↵Linus Torvalds11-396/+819
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-26Merge branch 'core-locking-for-linus' of ↵Linus Torvalds3-34/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock() lockdep: Comment all warnings lib: atomic64: Change the type of local lock to raw_spinlock_t locking, lib/atomic64: Annotate atomic64_lock::lock as raw locking, x86, iommu: Annotate qi->q_lock as raw locking, x86, iommu: Annotate irq_2_ir_lock as raw locking, x86, iommu: Annotate iommu->register_lock as raw locking, dma, ipu: Annotate bank_lock as raw locking, ARM: Annotate low level hw locks as raw locking, drivers/dca: Annotate dca_lock as raw locking, powerpc: Annotate uic->lock as raw locking, x86: mce: Annotate cmci_discover_lock as raw locking, ACPI: Annotate c3_lock as raw locking, oprofile: Annotate oprofilefs lock as raw locking, video: Annotate vga console lock as raw locking, latencytop: Annotate latency_lock as raw locking, timer_stats: Annotate table_lock as raw locking, rwsem: Annotate inner lock as raw locking, semaphores: Annotate inner lock as raw locking, sched: Annotate thread_group_cputimer as raw ... Fix up conflicts in kernel/posix-cpu-timers.c manually: making cputimer->cputime a raw lock conflicted with the ABBA fix in commit bcd5cff7216f ("cputimer: Cure lock inversion").
2011-10-14tracing: Fix returning of duplicate data after EOF in trace_pipe_rawSteven Rostedt1-2/+2
The trace_pipe_raw handler holds a cached page from the time the file is opened to the time it is closed. The cached page is used to handle the case of the user space buffer being smaller than what was read from the ring buffer. The left over buffer is held in the cache so that the next read will continue where the data left off. After EOF is returned (no more data in the buffer), the index of the cached page is set to zero. If a user app reads the page again after EOF, the check in the buffer will see that the cached page is less than page size and will return the cached page again. This will cause reading the trace_pipe_raw again after EOF to return duplicate data, making the output look like the time went backwards but instead data is just repeated. The fix is to not reset the index right after all data is read from the cache, but to reset it after all data is read and more data exists in the ring buffer. Cc: stable <stable@kernel.org> Reported-by: Jeremy Eder <jeder@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-14ftrace: Fix README to state tracing_on to start/stop tracingGeunsik Lim1-2/+2
tracing_enabled option is deprecated. To start/stop tracing, write to /sys/kernel/debug/tracing/tracing_on without tracing_enabled. This patch is based on Linux 3.1.0-rc1 Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com> Link: http://lkml.kernel.org/r/1313127022-23830-1-git-send-email-leemgs1@gmail.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-12Merge branch 'tip/perf/core' of git://github.com/rostedt/linux into perf/coreIngo Molnar10-383/+766
2011-10-11tracing: Do not allocate buffer for trace_markerSteven Rostedt1-28/+83
When doing intense tracing, the kmalloc inside trace_marker can introduce side effects to what is being traced. As trace_marker() is used by userspace to inject data into the kernel ring buffer, it needs to do so with the least amount of intrusion to the operations of the kernel or the user space application. As the ring buffer is designed to write directly into the buffer without the need to make a temporary buffer, and userspace already went through the hassle of knowing how big the write will be, we can simply pin the userspace pages and write the data directly into the buffer. This improves the impact of tracing via trace_marker tremendously! Thanks to Peter Zijlstra and Thomas Gleixner for pointing out the use of get_user_pages_fast() and kmap_atomic(). Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-11tracing: Warn on output if the function tracer was found corruptedSteven Rostedt3-0/+25
As the function tracer is very intrusive, lots of self checks are performed on the tracer and if something is found to be strange it will shut itself down keeping it from corrupting the rest of the kernel. This shutdown may still allow functions to be traced, as the tracing only stops new modifications from happening. Trying to stop the function tracer itself can cause more harm as it requires code modification. Although a WARN_ON() is executed, a user may not notice it. To help the user see that something isn't right with the tracing of the system a big warning is added to the output of the tracer that lets the user know that their data may be incomplete. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-10ftrace/kprobes: Fix not to delete probes if in useMasami Hiramatsu1-9/+49
Fix kprobe-tracer not to delete a probe if the probe is in use. In that case, delete operation will return -EBUSY. This bug can cause a kernel panic if enabled probes are deleted during perf record. (Add some probes on functions) sh-4.2# perf probe --del probe:\* sh-4.2# exit (kernel panic) This is originally reported on the fedora bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=742383 I've also checked that this problem doesn't happen on tracepoints when module removing because perf event locks target module. $ sudo ./perf record -e xfs:\* -aR sh sh-4.2# rmmod xfs ERROR: Module xfs is in use sh-4.2# exit [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.203 MB perf.data (~8862 samples) ] Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/20111004104438.14591.6553.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-07Merge branch 'pm-runtime' into pm-for-linusRafael J. Wysocki2-0/+23
* pm-runtime: PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set PM / Runtime: Replace dev_dbg() with trace_rpm_*() PM / Runtime: Introduce trace points for tracing rpm_* functions PM / Runtime: Don't run callbacks under lock for power.irq_safe set USB: Add wakeup info to debugging messages PM / Runtime: pm_runtime_idle() can be called in atomic context PM / Runtime: Add macro to test for runtime PM events PM / Runtime: Add might_sleep() to runtime PM functions
2011-09-29PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is setMing Lei1-0/+2
Do not build kernel/trace/rpm-traces.c if CONFIG_PM_RUNTIME is not set, which avoids a build failure. [rjw: Added the changelog and modified the subject slightly.] Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-27PM / Runtime: Introduce trace points for tracing rpm_* functionsMing Lei2-0/+21
This patch introduces 3 trace points to prepare for tracing rpm_idle/rpm_suspend/rpm_resume functions, so we can use these trace points to replace the current dev_dbg(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-22tracing: Fix preemptirqsoff tracer to not stop at preempt offSteven Rostedt1-2/+2
If irqs are disabled when preemption count reaches zero, the preemptirqsoff tracer should not flag that as the end. When interrupts are enabled and preemption count is not zero the preemptirqsoff correctly continues its tracing. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-19tracing: Add a counter clock for those that do not trust clocksSteven Rostedt2-0/+13
When debugging tight race conditions, it can be helpful to have a synchronized tracing method. Although in most cases the global clock provides this functionality, if timings is not the issue, it is more comforting to know that the order of events really happened in a precise order. Instead of using a clock, add a "counter" that is simply an incrementing atomic 64bit counter that orders the events as they are perceived to happen. The trace_clock_counter() is added from the attempt by Peter Zijlstra trying to convert the trace_clock_global() to it. I took Peter's counter code and made trace_clock_counter() instead, and added it to the choice of clocks. Just echo counter > /debug/tracing/trace_clock to activate it. Requested-by: Thomas Gleixner <tglx@linutronix.de> Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-By: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-09-13locking, tracing: Annotate tracing locks as rawThomas Gleixner3-34/+34
The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-30trace: Add ring buffer stats to measure rate of eventsVaibhav Nagarnaik2-1/+82
The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-30trace: Add a new readonly entry to report total buffer sizeVaibhav Nagarnaik1-0/+33
The current file "buffer_size_kb" reports the size of per-cpu buffer and not the overall memory allocated which could be misleading. A new file "buffer_total_size_kb" adds up all the enabled CPU buffer sizes and reports it. This is only a readonly entry. Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-2-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-30tracing: Add preempt disable for filter self testSteven Rostedt1-0/+6
The self testing for event filters does not really need preemption disabled as there are no races at the time of testing, but the functions it calls uses rcu_dereference_sched() which will complain if preemption is not disabled. Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Add startup tests for events filterJiri Olsa4-0/+264
Adding automated tests running as late_initcall. Tests are compiled in with CONFIG_FTRACE_STARTUP_TEST option. Adding test event "ftrace_test_filter" used to simulate filter processing during event occurance. String filters are compiled and tested against several test events with different values. Also testing that evaluation of explicit predicates is ommited due to the lazy filter evaluation. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-11-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Change filter_match_preds function to use walk_pred_treeJiri Olsa1-66/+58
Changing filter_match_preds function to use unified predicates tree processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-10-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Change fold_pred function to use walk_pred_treeJiri Olsa1-35/+33
Changing fold_pred_tree function to use unified predicates tree processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-9-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Change fold_pred_tree function to use walk_pred_treeJiri Olsa1-45/+20
Changing fold_pred_tree function to use unified predicates tree processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-8-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Change count_leafs function to use walk_pred_treeJiri Olsa1-33/+14
Changing count_leafs function to use unified predicates tree processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-7-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Unify predicate tree walking, change check_pred_tree ↵Jiri Olsa1-51/+86
function to use it Adding walk_pred_tree function to be used for walking throught the filter predicates. For each predicate the callback function is called, allowing users to add their own functionality or customize their way through the filter predicates. Changing check_pred_tree function to use walk_pred_tree. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-6-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Simplify tracepoint event lookupJiri Olsa1-6/+3
We dont need to perform lookup through the ftrace_events list, instead we can use the 'tp_event' field. Each perf_event contains tracepoint event field 'tp_event', which got initialized during the tracepoint event initialization. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-5-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Remove field_name from filter_pred structJiri Olsa2-51/+13
The field_name was used just for finding event's fields. This way we don't need to care about field_name allocation/free. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-4-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Separate predicate init and filter additionJiri Olsa1-33/+23
Making the code cleaner by having one function to fully prepare the predicate (create_pred), and another to add the predicate to the filter (filter_add_pred). As a benefit, this way the dry_run flag stays only inside the replace_preds function and is not passed deeper. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-3-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19tracing/filter: Use static allocation for filter predicatesJiri Olsa1-41/+16
Don't dynamically allocate filter_pred struct, use static memory. This way we can get rid of the code managing the dynamic filter_pred struct object. The create_pred function integrates create_logical_pred function. This way the static predicate memory is returned only from one place. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1313072754-4620-2-git-send-email-jolsa@redhat.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+16
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits) Revert "cfq: Remove special treatment for metadata rqs." block: fix flush machinery for stacking drivers with differring flush flags block: improve rq_affinity placement blktrace: add FLUSH/FUA support Move some REQ flags to the common bio/request area allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH xen/blkback: Make description more obvious. cfq-iosched: Add documentation about idling block: Make rq_affinity = 1 work as expected block: swim3: fix unterminated of_device_id table block/genhd.c: remove useless cast in diskstats_show() drivers/cdrom/cdrom.c: relax check on dvd manufacturer value drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse bsg-lib: add module.h include cfq-iosched: Reduce linked group count upon group destruction blk-throttle: correctly determine sync bio loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices loop: add management interface for on-demand device allocation loop: replace linked list of allocated devices with an idr index ...
2011-08-11blktrace: add FLUSH/FUA supportNamhyung Kim1-5/+16
Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or FUA follows WRITE, use the same 'F' flag for both cases and distinguish them by their (relative) position. The end results look like (other flags might be shown also): - WRITE: W - WRITE_FLUSH: FW - WRITE_FUA: WF - WRITE_FLUSH_FUA: FWF Note that we reuse TC_BARRIER due to lack of bit space of act_mask so that the older versions of blktrace tools will report flush requests as barriers from now on. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Namhyung Kim <namhyung@gmail.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-10tracing: Clean up tb_fmt to not give faulty compile warningSteven Rostedt1-9/+10
gcc incorrectly states that the variable "fmt" is uninitialized when CC_OPITMIZE_FOR_SIZE is set. Instead of just blindly setting fmt to NULL, the code is cleaned up a little to be a bit easier for humans to follow, as well as gcc to know the variables are initialized. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-05Merge branch 'linus' into perf/urgentIngo Molnar16-488/+860
Merge reason: Include most of the merge window trees, to do fixes on top. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma2-2/+2
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25trace events: Update version number reference to new 3.x scheme for ↵Jesper Juhl1-1/+1
EVENT_POWER_TRACING_DEPRECATED What was scheduled to be 2.6.41 is now going to be 3.1 . Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1107250929370.8080@swampdragon.chaosbits.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21Merge branch 'tip/perf/core' of ↵Ingo Molnar7-152/+419
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
2011-07-21Merge branch 'perf/urgent' into perf/coreIngo Molnar5-30/+135
Merge reason: pick up the latest fixes - they won't make v3.0. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-15tracing/kprobe: Update symbol reference when loading moduleMasami Hiramatsu1-1/+36
Since the address of a module-local variable can only be solved after the target module is loaded, the symbol fetch-argument should be updated when loading target module. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20110627072703.6528.75042.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15tracing/kprobes: Support module init function probingMasami Hiramatsu1-26/+138
To support probing module init functions, kprobe-tracer allows user to define a probe on non-existed function when it is given with a module name. This also enables user to set a probe on a function on a specific module, even if a same name (but different) function is locally defined in another module. The module name must be in the front of function name and separated by a ':'. e.g. btrfs:btrfs_init_sysfs Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20110627072656.6528.89970.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15tracing/kprobes: Merge trace probe enable/disable functionsMasami Hiramatsu1-56/+36
Merge redundant enable/disable functions into enable_trace_probe() and disable_trace_probe(). Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Link: http://lkml.kernel.org/r/20110627072644.6528.26910.stgit@fedora15 [ converted kprobe selftest to use enable_trace_probe ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14ftrace: Fix regression where ftrace breaks when modules are loadedSteven Rostedt1-2/+28
Enabling function tracer to trace all functions, then load a module and then disable function tracing will cause ftrace to fail. This can also happen by enabling function tracing on the command line: ftrace=function and during boot up, modules are loaded, then you disable function tracing with 'echo nop > current_tracer' you will trigger a bug in ftrace that will shut itself down. The reason is, the new ftrace code keeps ref counts of all ftrace_ops that are registered for tracing. When one or more ftrace_ops are registered, all the records that represent the functions that the ftrace_ops will trace have a ref count incremented. If this ref count is not zero, when the code modification runs, that function will be enabled for tracing. If the ref count is zero, that function will be disabled from tracing. To make sure the accounting was working, FTRACE_WARN_ON()s were added to updating of the ref counts. If the ref count hits its max (> 2^30 ftrace_ops added), or if the ref count goes below zero, a FTRACE_WARN_ON() is triggered which disables all modification of code. Since it is common for ftrace_ops to trace all functions in the kernel, instead of creating > 20,000 hash items for the ftrace_ops, the hash count is just set to zero, and it represents that the ftrace_ops is to trace all functions. This is where the issues arrise. If you enable function tracing to trace all functions, and then add a module, the modules function records do not get the ref count updated. When the function tracer is disabled, all function records ref counts are subtracted. Since the modules never had their ref counts incremented, they go below zero and the FTRACE_WARN_ON() is triggered. The solution to this is rather simple. When modules are loaded, and their functions are added to the the ftrace pool, look to see if any ftrace_ops are registered that trace all functions. And for those, update the ref count for the module function records. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14tracing/kprobes: Rename probe_* to trace_probe_*Masami Hiramatsu1-21/+22
Rename probe_* to trace_probe_* for avoiding namespace confliction. This also fixes improper names of find_probe_event() and cleanup_all_probes() to find_trace_probe() and release_all_trace_probes() respectively. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20110627072636.6528.60374.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14tracing: Have dynamic size event stack tracesSteven Rostedt3-19/+87
Currently the stack trace per event in ftace is only 8 frames. This can be quite limiting and sometimes useless. Especially when the "ignore frames" is wrong and we also use up stack frames for the event processing itself. Change this to be dynamic by adding a percpu buffer that we can write a large stack frame into and then copy into the ring buffer. For interrupts and NMIs that come in while another event is being process, will only get to use the 8 frame stack. That should be enough as the task that it interrupted will have the full stack frame anyway. Requested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-13ftrace: Fix dynamic selftest failure on some archsSteven Rostedt1-0/+26
Archs that do not implement CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST, will fail the dynamic ftrace selftest. The function tracer has a quick 'off' variable that will prevent the call back functions from being called. This variable is called function_trace_stop. In x86, this is implemented directly in the mcount assembly, but for other archs, an intermediate function is used called ftrace_test_stop_func(). In dynamic ftrace, the function pointer variable ftrace_trace_function is used to update the caller code in the mcount caller. But for archs that do not have CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST set, it only calls ftrace_test_stop_func() instead, which in turn calls __ftrace_trace_function. When more than one ftrace_ops is registered, the function it calls is ftrace_ops_list_func(), which will iterate over all registered ftrace_ops and call the callbacks that have their hash matching. The issue happens when two ftrace_ops are registered for different functions and one is then unregistered. The __ftrace_trace_function is then pointed to the remaining ftrace_ops callback function directly. This mean it will be called for all functions that were registered to trace by both ftrace_ops that were registered. This is not an issue for archs with CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST, because the update of ftrace_trace_function doesn't happen until after all functions have been updated, and then the mcount caller is updated. But for those archs that do use the ftrace_test_stop_func(), the update is immediate. The dynamic selftest fails because it hits this situation, and the ftrace_ops that it registers fails to only trace what it was suppose to and instead traces all other functions. The solution is to delay the setting of __ftrace_trace_function until after all the functions have been updated according to the registered ftrace_ops. Also, function_trace_stop is set during the update to prevent function tracing from calling code that is caused by the function tracer itself. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-13ftrace: Update filter when tracing enabled in set_ftrace_filter()Steven Rostedt1-0/+4
Currently, if set_ftrace_filter() is called when the ftrace_ops is active, the function filters will not be updated. They will only be updated when tracing is disabled and re-enabled. Update the functions immediately during set_ftrace_filter(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-13ftrace: Balance records when updating the hashSteven Rostedt1-16/+33
Whenever the hash of the ftrace_ops is updated, the record counts must be balance. This requires disabling the records that are set in the original hash, and then enabling the records that are set in the updated hash. Moving the update into ftrace_hash_move() removes the bug where the hash was updated but the records were not, which results in ftrace triggering a warning and disabling itself because the ftrace_ops filter is updated while the ftrace_ops was registered, and then the failure happens when the ftrace_ops is unregistered. The current code will not trigger this bug, but new code will. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07ftrace: Do not disable interrupts for modules in mcount updateSteven Rostedt1-5/+11
When I mounted an NFS directory, it caused several modules to be loaded. At the time I was running the preemptirqsoff tracer, and it showed the following output: # tracer: preemptirqsoff # # preemptirqsoff latency trace v1.1.5 on 2.6.33.9-rt30-mrg-test # -------------------------------------------------------------------- # latency: 1177 us, #4/4, CPU#3 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4) # ----------------- # | task: modprobe-19370 (uid:0 nice:0 policy:0 rt_prio:0) # ----------------- # => started at: ftrace_module_notify # => ended at: ftrace_module_notify # # # _------=> CPU# # / _-----=> irqs-off # | / _----=> need-resched # || / _---=> hardirq/softirq # ||| / _--=> preempt-depth # |||| /_--=> lock-depth # |||||/ delay # cmd pid |||||| time | caller # \ / |||||| \ | / modprobe-19370 3d.... 0us!: ftrace_process_locs <-ftrace_module_notify modprobe-19370 3d.... 1176us : ftrace_process_locs <-ftrace_module_notify modprobe-19370 3d.... 1178us : trace_hardirqs_on <-ftrace_module_notify modprobe-19370 3d.... 1178us : <stack trace> => ftrace_process_locs => ftrace_module_notify => notifier_call_chain => __blocking_notifier_call_chain => blocking_notifier_call_chain => sys_init_module => system_call_fastpath That's over 1ms that interrupts are disabled on a Real-Time kernel! Looking at the cause (being the ftrace author helped), I found that the interrupts are disabled before the code modification of mcounts into nops. The interrupts only need to be disabled on start up around this code, not when modules are being loaded. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07tracing: Still trace filtered irq functions when irq trace is disabledSteven Rostedt2-17/+35
If a function is set to be traced by the set_graph_function, but the option funcgraph-irqs is zero, and the traced function happens to be called from a interrupt, it will not be traced. The point of funcgraph-irqs is to not trace interrupts when we are preempted by an irq, not to not trace functions we want to trace that happen to be *in* a irq. Luckily the current->trace_recursion element is perfect to add a flag to help us be able to trace functions within an interrupt even when we are not tracing interrupts that preempt the trace. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07ftrace: Fix regression of :mod:module function enablingSteven Rostedt2-10/+5
The new code that allows different utilities to pick and choose what functions they trace broke the :mod: hook that allows users to trace only functions of a particular module. The reason is that the :mod: hook bypasses the hash that is setup to allow individual users to trace their own functions and uses the global hash directly. But if the global hash has not been set up, it will cause a bug: echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter produces: [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip BUG: unable to handle kernel paging request at ffffffff8160ec90 IP: [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1 Oops: 0003 [#1] SMP Jul 7 04:02:28 phyllis kernel: [55303.858604] CPU 1 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt Pid: 10344, comm: bash Tainted: G WC 3.0.0-rc5 #1 Dell Inc. Inspiron N5010/0YXXJJ RIP: 0010:[<ffffffff810d9136>] [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 RSP: 0018:ffff88003a96bda8 EFLAGS: 00010246 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470) Stack: 0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5 ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80 ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00 Call Trace: [<ffffffff810d92f5>] match_records+0x155/0x1b0 [<ffffffff810d940c>] ftrace_mod_callback+0xbc/0x100 [<ffffffff810dafdf>] ftrace_regex_write+0x16f/0x210 [<ffffffff810db09f>] ftrace_filter_write+0xf/0x20 [<ffffffff81166e48>] vfs_write+0xc8/0x190 [<ffffffff81167001>] sys_write+0x51/0x90 [<ffffffff815c7e02>] system_call_fastpath+0x16/0x1b Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2 RIP [<ffffffff810d9136>] add_hash_entry+0x66/0xd0 RSP <ffff88003a96bda8> CR2: ffffffff8160ec90 ---[ end trace a5d031828efdd88e ]--- Reported-by: Brian Marete <marete@toshnix.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07tracing: Have "enable" file use refcounts like the "filter" fileSteven Rostedt1-9/+22
The "enable" file for the event system can be removed when a module is unloaded and the event system only has events from that module. As the event system nr_events count goes to zero, it may be freed if its ref_count is also set to zero. Like the "filter" file, the "enable" file may be opened by a task and referenced later, after a module has been unloaded and the events for that event system have been removed. Although the "filter" file referenced the event system structure, the "enable" file only references a pointer to the event system name. Since the name is freed when the event system is removed, it is possible that an access to the "enable" file may reference a freed pointer. Update the "enable" file to use the subsystem_open() routine that the "filter" file uses, to keep a reference to the event system structure while the "enable" file is opened. Cc: <stable@kernel.org> Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 16:24:16 +0000