summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2009-01-25lcs: fix compilation for !CONFIG_IP_MULTICASTHeiko Carstens1-2/+6
drivers/s390/net/lcs.c: In function 'lcs_new_device': drivers/s390/net/lcs.c:2179: error: implicit declaration of function 'lcs_set_multicast_list' Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11qeth: fix usage of netdev_opsFrank Blaschka2-5/+21
Have separate netdev_ops for OSA and HiperSocket/TR. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-09[S390] qdio: fix broken pointer in case of CONFIG_DEBUG_FS is disabledJan Glauber1-0/+2
If CONFIG_DEBUG_FS is disabled debugfs_create_file returns -ENODEV instead of zero. Since the return value is stored and used at shutdown to remove existing entries an OOPS may be triggered. Add a check of the debugfs_create_file return value and in case of an error set the entry to NULL so it will be ignored at shutdown. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-01-09[S390] dasd: add device attribute to disable blocking on lost pathsHolger Smolinski4-3/+54
When the connection between host and storage server is lost, the dasd device driver usually blocks all I/O on affected devices and waits for them to reappear. In some setups however it would be better if the I/O is returned as error so that device can be recovered by some other means, eg. in a raid or multipath setup. Signed-off-by: Holger Smolinski <Holger.Smolinski@de.ibm.com> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-01-09[S390] dasd: send change uevents for dasd block devicesStefan Weinhuber1-1/+20
When a DASD device enters or leaves the 'online' state we need to trigger change events for the respective disk and partitions. These extra events are needed because when disk and partitions are first added, udev rules that try to read disk labels or other data may fail as the disk may not yet be ready. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-01-09[S390] tape block: fix dependenciesKamalesh Babulal1-1/+1
CC drivers/s390/char/tape_block.o In file included from drivers/s390/char/tape_block.c:24: drivers/s390/char/tape.h:159: warning: 'struct request' declared inside parameter list Adding the dependency of CONFIG_BLOCK to CONFIG_S390_TAPE_BLOCK. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-46/+34
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (84 commits) wimax: fix kernel-doc for debufs_dentry member of struct wimax_dev net: convert pegasus driver to net_device_ops bnx2x: Prevent eeprom set when driver is down net: switch kaweth driver to netdevops pcnet32: round off carrier watch timer i2400m/usb: wrap USB power saving in #ifdef CONFIG_PM wimax: testing for rfkill support should also test for CONFIG_RFKILL_MODULE wimax: fix kconfig interactions with rfkill and input layers wimax: fix '#ifndef CONFIG_BUG' layout to avoid warning r6040: bump release number to 0.20 r6040: warn about MAC address being unset r6040: check PHY status when bringing interface up r6040: make printks consistent with DRV_NAME gianfar: Fixup use of BUS_ID_SIZE mlx4_en: Returning real Max in get_ringparam mlx4_en: Consider inline packets on completion netdev: bfin_mac: enable bfin_mac net dev driver for BF51x qeth: convert to net_device_ops vlan: add neigh_setup dm9601: warn on invalid mac address ...
2009-01-08Merge branch 'master' of ↵David S. Miller11-81/+21
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-01-08qeth: convert to net_device_opsFrank Blaschka2-46/+34
qeth_l2, qeth_l3 convert to net_device_ops. qeth_l3 remove vlan neigh_setup hack since it does not work any longer with the new net_device_ops. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08fix similar typos to successfullColy Li5-5/+5
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07Merge branch 'for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) trivial: chack -> check typo fix in main Makefile trivial: Add a space (and a comma) to a printk in 8250 driver trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx trivial: Fix misspelling of "firmware" in powerpc Makefile trivial: Fix misspelling of "firmware" in usb.c trivial: Fix misspelling of "firmware" in qla1280.c trivial: Fix misspelling of "firmware" in a100u2w.c trivial: Fix misspelling of "firmware" in megaraid.c trivial: Fix misspelling of "firmware" in ql4_mbx.c trivial: Fix misspelling of "firmware" in acpi_memhotplug.c trivial: Fix misspelling of "firmware" in ipw2100.c trivial: Fix misspelling of "firmware" in atmel.c trivial: Fix misspelled firmware in Kconfig trivial: fix an -> a typos in documentation and comments trivial: fix then -> than typos in comments and documentation trivial: update Jesper Juhl CREDITS entry with new email trivial: fix singal -> signal typo trivial: Fix incorrect use of "loose" in event.c trivial: printk: fix indentation of new_text_line declaration trivial: rtc-stk17ta8: fix sparse warning ...
2009-01-06s390: remove s390_root_dev_*()Mark McLoughlin9-77/+17
Replace s390_root_dev_register() with root_device_register() etc. [Includes fix from Cornelia Huck] Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer2-4/+4
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds4-29/+63
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (44 commits) qlge: Fix sparse warnings for tx ring indexes. qlge: Fix sparse warning regarding rx buffer queues. qlge: Fix sparse endian warning in ql_hw_csum_setup(). qlge: Fix sparse endian warning for inbound packet control block flags. qlge: Fix sparse warnings for byte swapping in qlge_ethool.c myri10ge: print MAC and serial number on probe failure pkt_sched: cls_u32: Fix locking in u32_change() iucv: fix cpu hotplug af_iucv: Free iucv path/socket in path_pending callback af_iucv: avoid left over IUCV connections from failing connects af_iucv: New error return codes for connect() net/ehea: bitops work on unsigned longs Revert "net: Fix for initial link state in 2.6.28" tcp: Kill extraneous SPLICE_F_NONBLOCK checks. tcp: don't mask EOF and socket errors on nonblocking splice receive dccp: Integrate the TFRC library with DCCP dccp: Clean up ccid.c after integration of CCID plugins dccp: Lockless integration of CCID congestion-control plugins qeth: get rid of extra argument after printk to dev_* conversion qeth: No large send using EDDP for HiperSockets. ...
2009-01-04qeth: get rid of extra argument after printk to dev_* conversionHeiko Carstens1-1/+1
drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_setadapter_parms': drivers/s390/net/qeth_l3_main.c:1049: warning: too many arguments for format Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: No large send using EDDP for HiperSockets.Klaus-Dieter Wacker1-1/+8
From: Klaus-Dieter Wacker <kdwacker@de.ibm.com> The device driver qeth dos not support large send using EDDP for HiperSockets. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: do not spin for SETIP ip assist commandFrank Blaschka1-11/+29
The ip assist hw command for setting an IP address last unacceptable long so we can not spin while we waiting for the irq. Since we can ensure process context for all occurrences of this command we can use wait. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: avoid crash in case of layer mismatch for VSWITCHUrsula Braun3-6/+14
For z/VM GuestLAN or VSWITCH devices the transport layer is configured in z/VM. The layer2 attribute of a participating Linux device has to match the z/VM definition. In case of a mismatch Linux currently crashes in qeth recovery due to a reference to the not yet existing net_device. Solution: add a check for existence of net_device and add a message pointing to the mismatch of layer definitions in Linux and z/VM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: exploit source MAC address for inbound layer3 packetsUrsula Braun3-9/+9
OSA-devices operating in layer3 mode offer adding of the source MAC address to the QDIO header of inbound packets. The qeth driver can exploit this functionality to replace FAKELL-entries in the ethernet header of received packets. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: HiperSockets mcl string conversion (pre z9 mach)Klaus-Dieter Wacker1-1/+2
The pre z9 machines provide an mcl string in EBCDIC format, z9 or later provide string in ASCII format. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-31[PATCH] improve idle cputime accountingMartin Schwidefsky2-1/+4
Distinguish the cputime of the idle process where idle is actually using cpu cycles from the cputime where idle is sleeping on an enabled wait psw. The former is accounted as system time, the later as idle time. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds11-202/+157
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (104 commits) [SCSI] fcoe: fix configuration problems [SCSI] cxgb3i: fix select/depend problem [SCSI] fcoe: fix incorrect use of struct module [SCSI] cxgb3i: remove use of skb->sp [SCSI] cxgb3i: Add cxgb3i iSCSI driver. [SCSI] zfcp: Remove unnecessary warning message [SCSI] zfcp: Add support for unchained FSF requests [SCSI] zfcp: Remove busid macro [SCSI] zfcp: remove DID_DID flag [SCSI] zfcp: Simplify mask lookups for incoming RSCNs [SCSI] zfcp: Remove initial device data from zfcp_data [SCSI] zfcp: fix compile warning [SCSI] zfcp: Remove adapter list [SCSI] zfcp: Simplify SBAL allocation to fix sparse warnings [SCSI] zfcp: register with SCSI layer on ccw registration [SCSI] zfcp: Fix message line break [SCSI] qla2xxx: changes in multiq code [SCSI] eata: fix the data buffer accessors conversion regression [SCSI] ibmvfc: Improve async event handling [SCSI] lpfc : correct printk types on PPC compiles ...
2008-12-30kvm-s390: implement config_changed for virtio on s390Christian Borntraeger1-3/+19
This patch implements config_changed for the s390 virtio transport. We use the least significant bit of the interrupt parameter field to decide, if this interrupt should call the virtio virtqueue callback or the config_changed callback. This method is compatible with old host and guest code. Old 64 bit guests will not check the bit and trigger a harmless additional vring_interrupt call. Old host code will never set this bit, this is also safe. This patch also takes care of a potential future 31 bit virtio transport for s390. On 31 bit _LC_PFAULT_INTPARM and __LC_EXT_PARAMS are identical. We exploit the alignment of the token and fold the change bit into the lsb of the token itself. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30virtio: hand virtio ring alignment as argument to vring_new_virtqueueRusty Russell1-1/+2
This allows each virtio user to hand in the alignment appropriate to their virtio_ring structures. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-12-30virtio: use KVM_S390_VIRTIO_RING_ALIGN instead of relying on pagesizeRusty Russell1-3/+6
This doesn't really matter, since s390 pagesize is 4k anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-12-29[SCSI] zfcp: Remove unnecessary warning messageChristof Schmitt2-7/+1
Remove a message that was emitted for a port that could not initially be opened. This is a rare case when the port discovery hits an initiator port and only confuses the user with an initator port logged in the message. Remove the whole special case: The failed "open port" request triggers required follow-up actions anyway. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: Add support for unchained FSF requestsChristof Schmitt6-40/+61
Add the support to send CT and ELS requests as unchained FSF requests. This is required for older hardware and was somehow omitted during the cleanup of the FSF layer. The req_count and resp_count attributes are unused, so remove them instead of adding a special case for setting them. Also add debug data and a warning, when the ct request hits a limit. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: Remove busid macroChristof Schmitt3-8/+6
With the change to the dev_ message macros, the macro to get the busid is only used in a few places. Remove it and directly get the dev_name from the device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: remove DID_DID flagChristof Schmitt4-9/+4
The port flag DID_DID indicates whether we know the current id of the port. This is always set in parallel. Since the id 0 is invalid (because the port id 0 is invalid) we can remove the DID_DID flag: d_id of 0 indicates an invalid d_id != 0 is a valid one. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: Simplify mask lookups for incoming RSCNsChristof Schmitt2-30/+15
Use an array for looking up the mask corresponding to the 2-bit information instead of the switch/case. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: Remove initial device data from zfcp_dataChristof Schmitt2-54/+45
The information from the kernel parameter is only needed during init. Keep the three pieces (busid, wwpn and lun) local to simplify the global zfcp_data structures. While at it, also remove the unused loglevel variable and give the module parameter variable a better name. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: fix compile warningHeiko Carstens1-1/+2
Get rid of this one: drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_thread': drivers/s390/scsi/zfcp_erp.c:1400: warning: ignoring return value of 'down_interruptible', declared with attribute warn_unused_result zfcp_erp_thread is a kernel thread which can't receive any signals. So introduce a dummy variable and get rid of the warning. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: Remove adapter listChristof Schmitt3-28/+3
After the latest changes, the list of FCP devices is only used to lookup the adapter for requests from the actcli tool. Change this to use the lookup function in the cio layer. Now we can remove the adapter list and have one place less to use the global config_lock. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: Simplify SBAL allocation to fix sparse warningsChristof Schmitt1-17/+17
When waiting for a request claim the SBAL before waiting. This way, locking before each check of the free counter is not required and sparse does not emit warnings for the complicated locking scheme. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: register with SCSI layer on ccw registrationSwen Schillig2-7/+2
Synchronize the registration and de-registration with the SCSI layer at CCW registration, de-registration. Before we registered with the SCSI layer on adapter activation. This way the reg and de-reg process is in balance. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] zfcp: Fix message line breakChristof Schmitt1-1/+1
Move the closing parenthesis before the line break. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Acked-by: Felix Beck <felix@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds3-22/+16
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-25[S390] convert ctcm printks to dev_xxx and pr_xxx macros.Peter Tiedemann5-56/+86
Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert zfcp printks to pr_xxx macros.Christof Schmitt10-3/+33
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert vmlogrdr printks to pr_xxx macros.Martin Schwidefsky1-13/+13
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert zfcp dumper printks to pr_xxx macros.Michael Holzheu1-6/+8
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert qeth printks to dev_xxx and pr_xxx macros.Frank Blaschka4-192/+212
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert sclp printks to pr_xxx macros.Martin Schwidefsky4-28/+41
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert iucv printks to dev_xxx and pr_xxx macros.Ursula Braun1-26/+38
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert ap_bus printks to pr_xxx macros.Martin Schwidefsky1-3/+7
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert dcssblk and extmem printks messages to pr_xxx macros.Hongjie Yang1-39/+33
Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert monwriter printks to pr_xxx macros.Melissa Howland1-1/+4
Signed-off-by: Melissa Howland <melissah@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert monreader printks to pr_xxx macros.Gerald Schaefer1-24/+17
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert cio printks to pr_xxx macros.Michael Ernst5-13/+30
Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert vmur printks to pr_xxx macros.Frank Munzert1-6/+9
Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 10:34:34 +0000