summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-02-21iwlwifi: split the drivers for agn and legacy devices 3945/4965Wey-Yi Guy30-14046/+61
Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21iwlwifi: enable 2-wire bt coex support for non-combo deviceWey-Yi Guy1-3/+5
For non-combo devices, 2-wire BT coex is needed to make sure BT coex still function with external BT devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21iwlwifi: Loading correct uCode again when fail to loadWey-Yi Guy1-0/+9
During uCode loading, if the reply_alive come back with "failure", try to load the same uCode again. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-21iwlwifi: Limit number of firmware reloadWey-Yi Guy2-0/+31
If device has serious problem and cause firmware can not recover itself. Keep reloading firmware will not help, it can only fill up the syslog and lock up the system because busy reloading. Introduce the limit reload counter, if the reload reach the maximum within the pre-defined duration;stop the reload operation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville11-28/+22
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-18ath9k_hw: Updates for AR9485 1.1 chipsets.Vivek Natarajan3-11/+1246
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath9k_htc: Fix a compilation warning.Vivek Natarajan1-1/+1
Initialize caldata to avoid compilation warning. CC [M] drivers/net/wireless/ath/ath9k/htc_drv_main.o drivers/net/wireless/ath/ath9k/htc_drv_main.c: In function ‘ath9k_htc_config’: drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: warning: ‘caldata’ may be used uninitialized in this function drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: note: ‘caldata’ was declared here Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: implement flush callbackChristian Lamparter1-0/+43
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: Fix compile warningLarry Finger1-1/+1
If any of the p54-based drivers are built with CONFIG_P54_LEDS not defined, the following warning is generated: CC [M] drivers/net/wireless/p54/main.o drivers/net/wireless/p54/main.c: In function ‘p54_register_common’: drivers/net/wireless/p54/main.c:614:21: warning: unused variable ‘priv’ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath5k: move external function definitions to a header fileBob Copeland2-17/+20
Johannes pointed out the mess of external function prototypes in the mac80211-ops.c file. Woe to anyone who changes these functions... Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath5k: Correct channel setting for AR2317 chipNikolay Ledovskikh1-0/+1
Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18wireless: rt2x00: rt2800pci.c: add two idsXose Vazquez Perez1-0/+2
taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-15ath9k: Fix ath9k prevents CPU to enter C3 statesMohammed Shafi Shajakhan3-22/+0
The DMA latency issue is observed only in Intel pinetrail platforms but in the driver we had a default PM-QOS value of 55. This caused unnecessary power consumption and battery drain in other platforms. Remove the pm-qos thing in the driver code and address the throughput issue in Intel pinetrail platfroms in user space using any one of the scripts in below links: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/cpudmalatency.c http://johannes.sipsolutions.net/files/netlatency.c.txt More details can be found in the following bugzilla link: https://bugzilla.kernel.org/show_bug.cgi?id=27532 This reverts the following commits: 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b 4dc3530df7c0428b41c00399a7ee8c929406d181 10598c124ecabbbfd7522f74de19b8f7d52a1bee Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54spi: update sample eepromChristian Lamparter1-4/+5
Commit: "p54: enhance rssi->dBm database import" changed the way how the driver deals with the rssical data. A new data format was necessary and hence this patch. NOTE: (for users with a custom eeprom binary) I spent some time updating p54tools to support the new format too: => (git available from) http://git.kernel.org/?p=linux/kernel/git/chr/p54tools.git It now comes with a simplistic script "n800_rssi2v2.sh" which can be used to automate the conversion. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54: enhance rssi->dBm database importChristian Lamparter7-41/+176
This patch fixes several shortcomings of the previous implementation. Features of the rewrite include: * handles undocumented "0x0000" word at the start of the frequency table. (Affected some early? DELL 1450 USB devices and my Symbol 5GHz miniPCI card.) * supports more than just one reference point per band. (Also needed for the Symbol card.) * ships with default values in case the eeprom data is damaged, absent or unsupported. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54: p54_generate_band cleanupChristian Lamparter1-10/+11
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14p54: sort channel list by frequency instead of channel indexChristian Lamparter1-2/+2
Some channel indices of the low 5GHz band clash with those of the 2.4GHz band. Therefore we should go with the channel's center frequency. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: add unlikely to ZD_ASSERTJussi Kivilinna1-1/+1
Case assert is violated should be quite unlikely. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: move async iowrite16v up to callersJussi Kivilinna3-13/+37
Writing beacon to device happen through multiple write command calls. zd_usb_iowrite16v uses synchronous urb call and with multiple write commands in row causes high CPU usage. Make asynchronous zd_usb_iowrite16v_async available outside zd_usb.c and use where possible. This lower CPU usage from ~10% to ~2% on Intel Atom when running AP-mode with 100 TU beacon interval. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: use async urb for write commandJussi Kivilinna2-25/+142
Writing beacon to device happen through multiple write command calls. zd_usb_iowrite16v uses synchronous urb call and with multiple write commands in row causes high CPU usage. This patch makes zd_usb_iowrite16v use asynchronous urb submit within zd_usb.c. zd_usb_iowrite16v_async_start is used to initiate writing multiple commands to device using zd_usb_iowrite16v_async. Each URB is delayed and submitted to device by next zd_usb_iowrite16v_async call or by call to zd_usb_iowrite16v_async_end. URBs submitted by zd_usb_iowrite16v_async have URB_NO_INTERRUPT set and last URB send by zd_usb_iowrite16v_async_end does not. This lower CPU usage when doing writes that require multiple URBs. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14zd1211rw: correct use of usb_bulk_msg on interrupt endpointsJussi Kivilinna1-12/+12
zd1211rw is using usb_bulk_msg() with usb_sndbulkpipe() on interrupt endpoint. However usb_bulk_msg() internally corrects this and makes interrupt URB. It's better to change usb_bulk_msgs in zd1211rw to usb_interrupt_msg for less confusion. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14ath9k: disable beaconing before stopping beacon queueRajkumar Manoharan3-22/+52
Beaconing should be disabled before stopping beacon queue. Not doing so could queue up beacons in hw that causes failure to stop Tx DMA, due to pending frames in hw and also unnecessary beacon tasklet schedule. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14rt2x00: Check for errors from skb_pad() callsSeth Forshee3-6/+30
Commit 739fd94 ("rt2x00: Pad beacon to multiple of 32 bits") added calls to skb_pad() without checking the return value, which could cause problems if any of those calls does happen to fail. Add checks to prevent this from happening. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11rtlwifi: rtl8192ce: Rework rtl8192ce/phy.cLarry Finger1-64/+35
Make the phy.c codes for rtl8192ce and rtl8192cu be as alike as possible. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11rtlwifi: rtl8192ce: Refactor rtl8192ce/fwLarry Finger5-42/+45
Make rtlwifi/rtl8192ce/fw.{h,c} match what will be needed for rtlwifi/rtl8192cu.{h,c}. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11rtlwifi: rtl8192ce: Refactor rtl8192ce/dmLarry Finger4-1358/+1392
To reuse as much code as possible when adding additional drivers to the rtlwifi tree, the common parts of various routines are moved to drivers/net/wireless/rtlwifi. This patch does that for the version of dm.{h,c} used by rtl8192ce. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11rtlwifi: Add usb driverGeorge3-1/+1201
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: George <george0505@realtek.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11rtlwifi: Modify core routinesLarry Finger5-88/+56
The rtlwifi core needs some changes before inclusion of a driver for the RTL8192CU USB device. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: <chaoming_li@realsil.com.cn> Signed-off-by: <george0505@realtek.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-11iwlagn: handle bt defer work in 2000 seriesWey-Yi Guy1-1/+2
For 2000 series, need to handle bt traffic changes when receive notification from uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-11iwlagn: donot process bt update when bt coex disableWey-Yi Guy1-1/+11
If bt coex is disabled, do not process any bt related information from uCode even received. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-09iwlwifi: fix ack health for WiFi/BT combo devicesStanislaw Gruszka1-2/+7
Combo devices have TX statistics on different place, because struct statistics_rx_bt and struct statistics_rx have different size. User proper values on combo devices instead of random data. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwlwifi: cleanup iwl_good_ack_healthStanislaw Gruszka1-34/+35
Make ack health code easies to read. Compared to previous code, we do not print debug messages when expected_ack_cnt_delta == 0 and also do check against negative deltas. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwlwifi: cleanup iwl_recover_from_statisticsStanislaw Gruszka1-25/+12
No functional change, make recover from statistics code easies to read. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Remove redundant beacon_intervalSteve Brown4-7/+9
The variable appears in both ath_softc and ath_beacon_config. The struct ath_beacon_config is embedded in ath_softc. The redundant variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8. Signed-off-by: Steve Brown <sbrown@cortland.com> Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Add debug info for configuring power level.Ben Greear1-0/+2
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ath9k: Print channel-type in chan-change dbg message.Ben Greear1-2/+3
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09iwl3945: remove plcp checkStanislaw Gruszka1-1/+0
Patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=654599 Many users report very low speed problem on 3945 devices, this patch fixes problem, but only for some of them. For unknown reason, sometimes after hw scanning, device is not able to receive frames at high rate. Since plcp health check may request hw scan to "reset radio", performance problem start to be observable after update kernel to .35, where plcp check was introduced. Bug reporter confirmed that removing plcp check fixed problem for him. Reported-and-tested-by: SilvioTO <silviotoya@yahoo.it> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-08wl12xx: set supported_rates after associationEliad Peller5-115/+73
Instead of looking for supported_rates change on every tx packet, just extract the supported_rates after association completes (station only). Remove wl1271.sta_rate_set and WL1271_FLAG_STA_RATES_CHANGED which are not used anymore. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: use the conf struct instead of macros for memory configurationEliad Peller4-12/+24
make the configuration management more flexible by using the conf struct, rather than predefined macros. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: move to new firmware (6.1.3.50.49)Eliad Peller13-60/+162
This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49) Since this fw is not backward compatible with previous fw versions, a new fw (with different name) is being fetched. (the patch is big because it contains all the required fw api changes. splitting it into multiple patches will result in corrupted intermediate commits) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-08wl12xx: mcp2.5 - add config_ps acxEliad Peller4-0/+50
mcp2.5 uses this acx to configure the fw only once, rather than passing the params in every enter psm command. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-07ath9k: Update comments for not parsing DTIM periodMohammed Shafi Shajakhan1-2/+3
Add few comments for not parsing DTIM period from mac80211 Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07ath5k: Fix fast channel switchingNick Kossifidis1-55/+87
Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-07iwlagn: Re-enable RF_KILL interrupt when downDon Fry1-0/+6
With commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 only one RF_KILL interrupt will be seen by the driver when the interface is down. Re-enable the interrupt when it occurs to see all transitions. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-06iwlwifi: fix compiling error with different configurationWey-Yi Guy1-2/+4
When .config has different configuration, it might fail to compile iwlwifi. fix it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-06iwlwifi: remove unnecessary lockingJohannes Berg2-6/+0
This code, and the places that set the variable is_internal_short_scan and the vif pointers are all protected by the mutex, there's no point in locking the spinlock here as well (any more). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-04ath9k: add additional checks for the baseband hang detectionFelix Fietkau2-9/+38
Since even with the latest changes the false positive issue of the baseband hang check is not fully solved yet, additional checks are needed. If the baseband hang occurs, the rx_clear signal will be stuck to high, so we can use the cycle counters to confirm it. With this patch, a hardware reset is only triggered if the baseband hang check returned true three times in a row, with a beacon interval between each check and if the busy time was also 99% or more during the check intervals. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04ath: Fix clearing of secondary key cache entry for TKIPJouni Malinen1-1/+4
All register writes to the key cache have to be done in pairs. However, the clearing of a separate MIC entry with hardware revisions that use combined MIC key layout did not do that with one of the registers. Add the matching register write to the following register to make the KEY4 register write actually complete. This is mostly a fix for a theoretical issue since the incorrect entry that could potentially be left behind in the key cache would not match with received frames. Anyway, better make this code clean the entry correctly using paired register writes. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: add useful debug outputJussi Kivilinna1-1/+8
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04zd1211rw: enable NL80211_IFTYPE_APJussi Kivilinna1-2/+5
It should be safe to enable AP-mode now. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 04:52:48 +0000