summaryrefslogtreecommitdiff
path: root/drivers/char/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2010-08-10tty: implement BTM as mutex instead of BKLArnd Bergmann1-0/+1
The tty locking now follows the rules for mutexes, so we can replace the BKL usage with a new subsystem wide mutex. Using a regular mutex here will change the behaviour when blocked on the BTM from spinning to sleeping, but that should not be visible to the user. Using the mutex also means that all the BTM is now covered by lockdep. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04arch/tile: core support for Tilera 32-bit chips.Chris Metcalf1-0/+1
This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-27char drivers: RAM oops/panic loggerMarco Stornelli1-0/+1
Ramoops, like mtdoops, can log oops/panic information but in RAM. It can be used with persistent RAM for systems without flash support. In addition, for this systems, with this driver, it's no more needed add to the kernel the mtd subsystem with advantage in footprint. It can be used in a very easy way with persistent RAM for systems without flash support. For these systems, with this driver, it is no longer required to cinlude mtd subsystem with an advantage in footprint. In addition, you can save flash space and store this information only in RAM. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc; Anders Grafstrom <anders.grafstrom@netinsight.net> Cc: Yuasa Yoichi <yuasa@linux-mips.org> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-21tty: n_gsm line disciplineAlan Cox1-0/+1
Add an implementation of GSM 0710 MUX. The implementation currently supports - Basic and advanced framing (as either end of the link) - UI or UIH data frames - Adaption layer 1-4 (1 and 2 via tty, 3 and 4 as skbuff lists) - Modem and control messages including the correct retry process - Flow control and exposes the MUX channels as a set of virtual tty devices including modem signals. This is an experimental driver. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: esp: remove broken driverAlan Cox1-1/+0
The ESP driver has been marked broken for years. It's an old ISA device that clearly nobody cares about any more. Remove it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-24drivers/char/uv_mmtimer.c: add memory mapped RTC driver for UVDimitri Sivanich1-0/+1
This driver memory maps the UV Hub RTC. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-03MIPS: Update VR41xx GPIO driver to use gpiolibYoichi Yuasa1-1/+0
Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-11tty: bfin_jtag_comm: emulate a TTY over the Blackfin EMUDAT/JTAG interfaceMike Frysinger1-0/+1
The Blackfin JTAG interface has a 4 byte generic data field (EMUDAT). With a little creative thinking, we can turn this into a TTY device. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-28Merge branch 'next' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits) powerpc/44x: Support 16K/64K base page sizes on 44x powerpc: Force memory size to be a multiple of PAGE_SIZE powerpc/32: Wire up the trampoline code for kdump powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M powerpc/32: Allow __ioremap on RAM addresses for kdump kernel powerpc/32: Setup OF properties for kdump powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs() powerpc: Prepare xmon_save_regs for use with kdump powerpc: Remove default kexec/crash_kernel ops assignments powerpc: Make default kexec/crash_kernel ops implicit powerpc: Setup OF properties for ppc32 kexec powerpc/pseries: Fix cpu hotplug powerpc: Fix KVM build on ppc440 powerpc/cell: add QPACE as a separate Cell platform powerpc/cell: fix build breakage with CONFIG_SPUFS disabled powerpc/mpc5200: fix error paths in PSC UART probe function powerpc/mpc5200: add rts/cts handling in PSC UART driver powerpc/mpc5200: Make PSC UART driver update serial errors counters powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver ... Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-25[S390] s390/hvc_console: z/VM IUCV hypervisor console supportHendrik Brueckner1-0/+1
This patch introduces a new hypervisor console (HVC) back-end that provides terminal access over the z/VM inter-user communication vehicle (IUCV). The z/VM IUCV communication is independent of the regular tcp/ip network and allows access even if there is no network connection between two z/VM guest virtual machines. The z/VM IUCV hypervisor console back-end helps the user to access a z/VM guest virtual machine that lacks of network connectivity; and thus, provides a "full-screen" terminal alternative to 3215/3270 terminal sessions. Use the hvc_iucv=[0..8] kernel boot parameter to specify the number of HVC terminals using a z/VM IUCV back-end. A recent version of the s390-tools package is required to establish a terminal connection to a z/VM IUCV hypervisor console back-end. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-19powerpc: udbg-based backend for hvc_consoleDavid Gibson1-0/+1
This adds a new backend for the hvc console based on the low-level udbg callbacks. This effectively implements a working runtime console in terms of the simple udbg primitives. This is kind of a hack - since udbg isn't something you really want to be using routinely - but it's really useful during bringup. This can be used to quickly implement a userspace-usable console while you're working on a proper driver for whatever console I/O device the hardware has. Or, it can be used to avoid writing a full blown tty/console driver entirely for quick-and-dirty I/O hardware that will later be replaced by something else. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-30CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.Ralf Baechle1-1/+0
It was only used by this one SGI platform which recently was converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30CHAR: Delete old and now unused DS1286 driver.Ralf Baechle1-1/+0
It was only used by two SGI platforms which recently were converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-13tty: Split tty_port into its own fileAlan Cox1-1/+1
Not much in it yet but this will grow a lot Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13tty: split the buffering from tty_ioAlan Cox1-1/+1
The two are basically independent chunks of code so lets split them up for readability and sanity. It also makes the API boundaries much clearer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-07powerpc/iseries: remove the old viocons driverStephen Rothwell1-1/+0
This driver was declared obsolete over 2 years ago, the alternative console driver for legacy iSeries (hvc_iseries) was made the default over 1 year ago and this driver has been build broken for over 3 months, so remove it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge git://git.infradead.org/embedded-2.6Linus Torvalds1-2/+2
* git://git.infradead.org/embedded-2.6: Make console charset translation optional
2008-07-25remove some more tipar bitsAdrian Bunk1-1/+0
Some bits were missed when the tipar driver was removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25hvc_console: rework setup to replace irq functions with callbacksChristian Borntraeger1-0/+1
This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-24drivers/char: remove old broken Cobalt LCD driverYoichi Yuasa1-1/+0
Remove old broken Cobalt LCD driver. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22tty: Split ldisc code into its own fileAlan Cox1-1/+1
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-15Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-buildBenjamin Herrenschmidt1-1/+0
Manual fixup of: arch/powerpc/Kconfig
2008-07-15powerpc: Add driver for Barrier Synchronization RegisterSonny Rao1-0/+1
Adds a character driver for BSR support on IBM POWER systems including Power5 and Power6. The BSR is an optional processor facility not currently implemented by any other processors. It's primary purpose is fast large SMP synchronization. More details on the BSR are in comments to the code which follows. This patch adds BSR driver to pseries_defconfig. Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-14drm: reorganise drm tree to be more future proof.Dave Airlie1-1/+0
With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-04Make console charset translation optionalDavid Woodhouse1-2/+2
By turning off the new CONSOLE_TRANSLATIONS option and dropping the associated code and tables from the kernel, we can save about 7KiB. Taken from linux-tiny project by Tim Bird and mangled further by dwmw2. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-25Blackfin char driver for Blackfin on-chip OTP memory (v3)Mike Frysinger1-0/+1
initial char driver for otp memory (only read supported atm ... needs real examples/docs for write support) v2-v3: - fixup __initdata with __initconst, as we are heading for 2.6.26 Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Acked-by: Jiri Slaby <jirislaby@gmail.com>
2008-02-07Merge branch 'for-2.6.25' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits) [POWERPC] Add SPE registers to core dumps [POWERPC] Use regset code for compat PTRACE_*REGS* calls [POWERPC] Use generic compat_sys_ptrace [POWERPC] Use generic compat_ptrace_request [POWERPC] Use generic ptrace peekdata/pokedata [POWERPC] Use regset code for PTRACE_*REGS* requests [POWERPC] Switch to generic compat_binfmt_elf code [POWERPC] Switch to using user_regset-based core dumps [POWERPC] Add user_regset compat support [POWERPC] Add user_regset_view definitions [POWERPC] Use user_regset accessors for GPRs [POWERPC] ptrace accessors for special regs MSR and TRAP [POWERPC] Use user_regset accessors for SPE regs [POWERPC] Use user_regset accessors for altivec regs [POWERPC] Use user_regset accessors for FP regs [POWERPC] mpc52xx: fix compile error introduce when rebasing patch [POWERPC] 4xx: PCIe indirect DCR spinlock fix. [POWERPC] Add missing native dcr dcr_ind_lock spinlock [POWERPC] 4xx: Fix offset value on Warp board [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry ...
2008-02-07Char: mxser, remove itJiri Slaby1-1/+0
(Old) mxser is obsoleted by mxser_new and scheduled for removal on Dec 2007. Remove it by renaming mxser_new to mxser. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06[POWERPC] Xilinx: hwicap driverStephen Neuendorffer1-0/+1
This includes code for new fifo-based xps_hwicap in addition to the older opb_hwicap, which has a significantly different interface. The common code between the two drivers is largely shared. Significant differences exists between this driver and what is supported in the EDK drivers. In particular, most of the architecture-specific code for reconfiguring individual FPGA resources has been removed. This functionality is likely better provided in a user-space support library. In addition, read and write access is supported. In addition, although the xps_hwicap cores support interrupt-driver mode, this driver only supports polled operation, in order to make the code simpler, and since the interrupt processing overhead is likely to slow down the throughput under Linux. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-24nozomi driverFrank Seidel1-0/+1
This is a driver to control the cardbus wireless data card that works on 3g networks. Greg Kroah-Hartman <gregkh@suse.de> did the initial driver cleanup. Thanks to Arnaud Patard <apatard@mandriva.com> for help with bugfixing. Thanks to Alan Cox for a lot of tty fixes. Thanks to Satyam Sharma <satyam@infradead.org> for fixing buildbreakage. Thanks to Frank Seidel <fseidel@suse.de> for a lot of bugfixes and rewriting to make it a sane Linux driver Thanks to Jiri Slaby <jirislaby@gmail.com> for a lot bugfixes, cleanups and rewrites that make it much more readable. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Frank Seidel <fseidel@suse.de> Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
2007-10-23Remove old lguest bus and drivers.Rusty Russell1-1/+0
This gets rid of the lguest bus, drivers and DMA mechanism, to make way for a generic virtio mechanism. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Virtio console driverRusty Russell1-0/+1
This is an hvc-based virtio console driver. It's suboptimal becuase hvc expects to have raw access to interrupts and virtio doesn't assume that, so it currently polls. There are two solutions: expose hvc's "kick" interface, or wean off hvc. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-08Correct Makefile rule for generating custom keymapMaarten Bressers1-1/+1
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b128719f5248e542036ea994610a29d0642a6, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by: Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds1-1/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits) [WATCHDOG] Fix pcwd_init_module crash [WATCHDOG] ICH9 support for iTCO_wdt [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges [WATCHDOG] 631xESB/632xESB support for iTCO_wdt [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY [WATCHDOG] Return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support [WATCHDOG] mv64x60_wdt: Get register address from platform data [WATCHDOG] mv64x60_wdt: set up platform_device in platform code [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt [WATCHDOG] s3c2410_wdt: fixup after arch include moves [WATCHDOG] git-watchdog-typo ...
2007-07-29[WATCHDOG] Fix pcwd_init_module crashWim Van Sebroeck1-1/+0
Fix for the problem detected by Ingo Molnar: enabling CONFIG_PCWATCHDOG=y crashes bzImage bootup. The reason for this can be found in drivers/makefile We first do: obj-y += char/ and later we do: obj-y += base/ block/ misc/ mfd/ net/ media/ So if we put a platform or isa or usb bus driver in char/watchdog (which is called from the Makefile in drivers/char/Makefile) then we didn't have the different device drivers initialized yet (they are in drivers/base and drivers/usb and ...) This fix makes sure that we compile the watchdog drivers after drivers/base, drivers/misc, drivers/pci and drivers/usb. We also do the compile after hwmon because in the future the watchdog temperature support will use the hwmon system. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24[SPARC32]: Deal with rtc/sun_mostek_rtc conflict.Al Viro1-0/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-21ps3: FLASH ROM Storage DriverGeert Uytterhoeven1-0/+2
Add a FLASH ROM Storage Driver for the PS3: - Implemented as a misc character device driver - Uses a fixed 256 KiB buffer allocated from boot memory as the hypervisor requires the writing of aligned 256 KiB blocks Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19lguest: the console driverRusty Russell1-0/+1
A simple console driver for lguest. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18xen: use the hvc console infrastructure for Xen consoleJeremy Fitzhardinge1-0/+1
Implement a Xen back-end for hvc console. * * * Add early printk support via hvc console, enable using "earlyprintk=xen" on the kernel command line. From: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Olof Johansson <olof@lixom.net>
2007-07-16Audit: add TTY input auditingMiloslav Trmac1-0/+1
Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07rename TANBAC TB0219 configYoichi Yuasa1-1/+1
Rename config for TANBAC TB0219 GPIO support to something more appropriate. Fixes this: drivers/char/Kconfig:906:warning: type of 'TANBAC_TB0219' redefined from 'boolean' to 'tristate' drivers/char/Kconfig:907:warning: choice values currently only support a single prompt Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[APM] Add shared version of APM emulationRalf Baechle1-0/+2
Currently ARM and MIPS both have nearly identical copies of the APM emulation code in their arch code. Add yet another copy of it to drivers char and make it selectable through SYS_SUPPORTS_APM_EMULATION. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-07[POWERPC] Celleb: hypervisor console driverIshizaki Kou1-0/+1
This patch adds hypervisor console driver for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[PATCH] mxser: make an experimental cloneJiri Slaby1-0/+1
Clone a new driver for moxa smartio devices by copying mxser.c to mxser_new.c and mxser.h to mxser_new.h. No other changes are made. This is for purposes of updating the driver to the latest vendor version. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-03Remove long-unmaintained ftape driver subsystem.Jeff Garzik1-1/+0
It's bitrotten, long unmaintained, long hidden under BROKEN_ON_SMP, etc. As scheduled in feature-removal-schedule.txt, and ack'd several times on lkml. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-03[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.Yoichi Yuasa1-4/+2
As per feature-removal-schedule.txt. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-29[PATCH] Remove old drivers/char/s3c2410_rtc.cBen Dooks1-1/+0
This can now be removed, since there is now a drivers/rtc/rtc-s3c.c driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] mspec driverJes Sorensen1-0/+1
Implement the special memory driver (mspec) based on the do_no_pfn approach. The driver is currently used only on SN2 hardware with special fetchop support but could be beneficial on other architectures using the uncached mode. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13[POWERPC] iseries: A new iSeries consoleStephen Rothwell1-0/+1
This driver uses the hvc_console.c infrastructure that is used by the pSeries virtual and RTAS consoles. This will allow us to make viocons.c obsolete and is another step along the way to a combined kernel (as viocons could not coexist with CONFIG_VT). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-07-07[POWERPC] Add support for briq front panelBenjamin Herrenschmidt1-0/+1
This adds the driver for the Briq front panel. This is a cleaned up version of a driver that has been floating around for some time now, initially written by Karsten Jeppesen <karsten@jeppesens.com> and cleaned up by jk and myself. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 21:43:41 +0000