summaryrefslogtreecommitdiff
path: root/drivers/misc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc')
-rw-r--r--drivers/misc/Kconfig26
-rw-r--r--drivers/misc/Makefile2
-rw-r--r--drivers/misc/apds9802als.c17
-rw-r--r--drivers/misc/atmel_tclib.c4
-rw-r--r--drivers/misc/bh1780gli.c19
-rw-r--r--drivers/misc/bmp085.c6
-rw-r--r--drivers/misc/cb710/Makefile4
-rw-r--r--drivers/misc/ep93xx_pwm.c6
-rw-r--r--drivers/misc/hmc6352.c4
-rw-r--r--drivers/misc/iwmc3200top/iwmc3200top.h4
-rw-r--r--drivers/misc/iwmc3200top/main.c14
-rw-r--r--drivers/misc/lis3lv02d/Kconfig37
-rw-r--r--drivers/misc/lis3lv02d/Makefile7
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d.c999
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d.h291
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d_i2c.c279
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d_spi.c145
-rw-r--r--drivers/misc/pch_phub.c90
-rw-r--r--drivers/misc/sgi-gru/Makefile4
-rw-r--r--drivers/misc/spear13xx_pcie_gadget.c908
-rw-r--r--drivers/misc/ti-st/st_core.c419
-rw-r--r--drivers/misc/ti-st/st_kim.c491
-rw-r--r--drivers/misc/ti-st/st_ll.c10
23 files changed, 3194 insertions, 592 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index cc8e49db45fe..4e007c6a4b44 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -2,6 +2,14 @@
# Misc strange devices
#
+# This one has to live outside of the MISC_DEVICES conditional,
+# because it may be selected by drivers/platform/x86/hp_accel.
+config SENSORS_LIS3LV02D
+ tristate
+ depends on INPUT
+ select INPUT_POLLDEV
+ default n
+
menuconfig MISC_DEVICES
bool "Misc devices"
---help---
@@ -394,6 +402,16 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
+config SPEAR13XX_PCIE_GADGET
+ bool "PCIe gadget support for SPEAr13XX platform"
+ depends on ARCH_SPEAR13XX
+ default n
+ help
+ This option enables gadget support for PCIe controller. If
+ board file defines any controller as PCIe endpoint then a sysfs
+ entry will be created for that controller. User can use these
+ sysfs node to configure PCIe EP as per his requirements.
+
config TI_DAC7512
tristate "Texas Instruments DAC7512"
depends on SPI && SYSFS
@@ -441,7 +459,7 @@ config BMP085
module will be called bmp085.
config PCH_PHUB
- tristate "PCH Packet Hub of Intel Topcliff"
+ tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213"
depends on PCI
help
This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -449,6 +467,11 @@ config PCH_PHUB
processor. The Topcliff has MAC address and Option ROM data in SROM.
This driver can access MAC address and Option ROM data in SROM.
+ This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+ for IVI(In-Vehicle Infotainment) use.
+ ML7213 is companion chip for Intel Atom E6xx series.
+ ML7213 is completely compatible for Intel EG20T PCH.
+
To compile this driver as a module, choose M here: the module will
be called pch_phub.
@@ -457,5 +480,6 @@ source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
source "drivers/misc/iwmc3200top/Kconfig"
source "drivers/misc/ti-st/Kconfig"
+source "drivers/misc/lis3lv02d/Kconfig"
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc20cb9..f5468602961f 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,8 +37,10 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
obj-y += ti-st/
obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o
+obj-y += lis3lv02d/
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index 644d4cd071cc..81db7811cf68 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -245,9 +245,8 @@ static int apds9802als_probe(struct i2c_client *client,
als_set_default_config(client);
mutex_init(&data->mutex);
+ pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
- pm_runtime_get(&client->dev);
- pm_runtime_put(&client->dev);
return res;
als_error1:
@@ -255,12 +254,19 @@ als_error1:
return res;
}
-static int apds9802als_remove(struct i2c_client *client)
+static int __devexit apds9802als_remove(struct i2c_client *client)
{
struct als_data *data = i2c_get_clientdata(client);
+ pm_runtime_get_sync(&client->dev);
+
als_set_power_state(client, false);
sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+
kfree(data);
return 0;
}
@@ -275,9 +281,6 @@ static int apds9802als_suspend(struct i2c_client *client, pm_message_t mesg)
static int apds9802als_resume(struct i2c_client *client)
{
als_set_default_config(client);
-
- pm_runtime_get(&client->dev);
- pm_runtime_put(&client->dev);
return 0;
}
@@ -323,7 +326,7 @@ static struct i2c_driver apds9802als_driver = {
.pm = APDS9802ALS_PM_OPS,
},
.probe = apds9802als_probe,
- .remove = apds9802als_remove,
+ .remove = __devexit_p(apds9802als_remove),
.suspend = apds9802als_suspend,
.resume = apds9802als_resume,
.id_table = apds9802als_id,
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index 3891124001f2..a844810b50f6 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -75,7 +75,7 @@ out:
return tc;
fail_ioremap:
- release_resource(r);
+ release_mem_region(r->start, ATMEL_TC_IOMEM_SIZE);
fail:
tc = NULL;
goto out;
@@ -95,7 +95,7 @@ void atmel_tc_free(struct atmel_tc *tc)
spin_lock(&tc_list_lock);
if (tc->regs) {
iounmap(tc->regs);
- release_resource(tc->iomem);
+ release_mem_region(tc->iomem->start, ATMEL_TC_IOMEM_SIZE);
tc->regs = NULL;
tc->iomem = NULL;
}
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index d5f3a3fd2319..d07cd67c951c 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -196,10 +196,11 @@ static int __devexit bh1780_remove(struct i2c_client *client)
}
#ifdef CONFIG_PM
-static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
+static int bh1780_suspend(struct device *dev)
{
struct bh1780_data *ddata;
int state, ret;
+ struct i2c_client *client = to_i2c_client(dev);
ddata = i2c_get_clientdata(client);
state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
@@ -217,14 +218,14 @@ static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
return 0;
}
-static int bh1780_resume(struct i2c_client *client)
+static int bh1780_resume(struct device *dev)
{
struct bh1780_data *ddata;
int state, ret;
+ struct i2c_client *client = to_i2c_client(dev);
ddata = i2c_get_clientdata(client);
state = ddata->power_state;
-
ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
"CONTROL");
@@ -233,9 +234,10 @@ static int bh1780_resume(struct i2c_client *client)
return 0;
}
+static SIMPLE_DEV_PM_OPS(bh1780_pm, bh1780_suspend, bh1780_resume);
+#define BH1780_PMOPS (&bh1780_pm)
#else
-#define bh1780_suspend NULL
-#define bh1780_resume NULL
+#define BH1780_PMOPS NULL
#endif /* CONFIG_PM */
static const struct i2c_device_id bh1780_id[] = {
@@ -247,11 +249,10 @@ static struct i2c_driver bh1780_driver = {
.probe = bh1780_probe,
.remove = bh1780_remove,
.id_table = bh1780_id,
- .suspend = bh1780_suspend,
- .resume = bh1780_resume,
.driver = {
- .name = "bh1780"
- },
+ .name = "bh1780",
+ .pm = BH1780_PMOPS,
+},
};
static int __init bh1780_init(void)
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index b6e1c9a6679e..ecd276ad6b19 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -402,7 +402,7 @@ exit:
return status;
}
-static int bmp085_probe(struct i2c_client *client,
+static int __devinit bmp085_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct bmp085_data *data;
@@ -438,7 +438,7 @@ exit:
return err;
}
-static int bmp085_remove(struct i2c_client *client)
+static int __devexit bmp085_remove(struct i2c_client *client)
{
sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
kfree(i2c_get_clientdata(client));
@@ -458,7 +458,7 @@ static struct i2c_driver bmp085_driver = {
},
.id_table = bmp085_id,
.probe = bmp085_probe,
- .remove = bmp085_remove,
+ .remove = __devexit_p(bmp085_remove),
.detect = bmp085_detect,
.address_list = normal_i2c
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile
index 7b80cbf1a609..467c8e9ca3c9 100644
--- a/drivers/misc/cb710/Makefile
+++ b/drivers/misc/cb710/Makefile
@@ -1,6 +1,4 @@
-ifeq ($(CONFIG_CB710_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_CB710_DEBUG) := -DDEBUG
obj-$(CONFIG_CB710_CORE) += cb710.o
diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c
index 46b3439673e9..16d7179e2f9b 100644
--- a/drivers/misc/ep93xx_pwm.c
+++ b/drivers/misc/ep93xx_pwm.c
@@ -249,11 +249,11 @@ static ssize_t ep93xx_pwm_set_invert(struct device *dev,
static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL);
static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL);
-static DEVICE_ATTR(freq, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(freq, S_IWUSR | S_IRUGO,
ep93xx_pwm_get_freq, ep93xx_pwm_set_freq);
-static DEVICE_ATTR(duty_percent, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(duty_percent, S_IWUSR | S_IRUGO,
ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent);
-static DEVICE_ATTR(invert, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(invert, S_IWUSR | S_IRUGO,
ep93xx_pwm_get_invert, ep93xx_pwm_set_invert);
static struct attribute *ep93xx_pwm_attrs[] = {
diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c
index 234bfcaf2099..ca938fc8a8d6 100644
--- a/drivers/misc/hmc6352.c
+++ b/drivers/misc/hmc6352.c
@@ -75,7 +75,7 @@ static ssize_t compass_heading_data_show(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
unsigned char i2c_data[2];
- unsigned int ret;
+ int ret;
mutex_lock(&compass_mutex);
ret = compass_command(client, 'A');
@@ -86,7 +86,7 @@ static ssize_t compass_heading_data_show(struct device *dev,
msleep(10); /* sending 'A' cmd we need to wait for 7-10 millisecs */
ret = i2c_master_recv(client, i2c_data, 2);
mutex_unlock(&compass_mutex);
- if (ret != 1) {
+ if (ret < 0) {
dev_warn(dev, "i2c read data cmd failed\n");
return ret;
}
diff --git a/drivers/misc/iwmc3200top/iwmc3200top.h b/drivers/misc/iwmc3200top/iwmc3200top.h
index 740ff0738ea8..620973ed8bf9 100644
--- a/drivers/misc/iwmc3200top/iwmc3200top.h
+++ b/drivers/misc/iwmc3200top/iwmc3200top.h
@@ -183,9 +183,7 @@ struct iwmct_priv {
u32 barker;
struct iwmct_dbg dbg;
- /* drivers work queue */
- struct workqueue_struct *wq;
- struct workqueue_struct *bus_rescan_wq;
+ /* drivers work items */
struct work_struct bus_rescan_worker;
struct work_struct isr_worker;
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
index c73cef2c3c5e..727af07f1fbd 100644
--- a/drivers/misc/iwmc3200top/main.c
+++ b/drivers/misc/iwmc3200top/main.c
@@ -89,7 +89,7 @@ static void op_top_message(struct iwmct_priv *priv, struct top_msg *msg)
switch (msg->hdr.opcode) {
case OP_OPR_ALIVE:
LOG_INFO(priv, FW_MSG, "Got ALIVE from device, wake rescan\n");
- queue_work(priv->bus_rescan_wq, &priv->bus_rescan_worker);
+ schedule_work(&priv->bus_rescan_worker);
break;
default:
LOG_INFO(priv, FW_MSG, "Received msg opcode 0x%X\n",
@@ -360,7 +360,7 @@ static void iwmct_irq(struct sdio_func *func)
/* clear the function's interrupt request bit (write 1 to clear) */
sdio_writeb(func, 1, IWMC_SDIO_INTR_CLEAR_ADDR, &ret);
- queue_work(priv->wq, &priv->isr_worker);
+ schedule_work(&priv->isr_worker);
LOG_TRACE(priv, IRQ, "exit iwmct_irq\n");
@@ -506,10 +506,6 @@ static int iwmct_probe(struct sdio_func *func,
priv->func = func;
sdio_set_drvdata(func, priv);
-
- /* create drivers work queue */
- priv->wq = create_workqueue(DRV_NAME "_wq");
- priv->bus_rescan_wq = create_workqueue(DRV_NAME "_rescan_wq");
INIT_WORK(&priv->bus_rescan_worker, iwmct_rescan_worker);
INIT_WORK(&priv->isr_worker, iwmct_irq_read_worker);
@@ -604,9 +600,9 @@ static void iwmct_remove(struct sdio_func *func)
sdio_release_irq(func);
sdio_release_host(func);
- /* Safely destroy osc workqueue */
- destroy_workqueue(priv->bus_rescan_wq);
- destroy_workqueue(priv->wq);
+ /* Make sure works are finished */
+ flush_work_sync(&priv->bus_rescan_worker);
+ flush_work_sync(&priv->isr_worker);
sdio_claim_host(func);
sdio_disable_func(func);
diff --git a/drivers/misc/lis3lv02d/Kconfig b/drivers/misc/lis3lv02d/Kconfig
new file mode 100644
index 000000000000..8f474e6fc7b4
--- /dev/null
+++ b/drivers/misc/lis3lv02d/Kconfig
@@ -0,0 +1,37 @@
+#
+# STMicroelectonics LIS3LV02D and similar accelerometers
+#
+
+config SENSORS_LIS3_SPI
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
+ depends on !ACPI && SPI_MASTER && INPUT
+ select SENSORS_LIS3LV02D
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer connected
+ via SPI. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for the SPI transport
+ is called lis3lv02d_spi.
+
+config SENSORS_LIS3_I2C
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
+ depends on I2C && INPUT
+ select SENSORS_LIS3LV02D
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer connected
+ via I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the device to act as a pinball machine-esque joystick.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for the I2C transport
+ is called lis3lv02d_i2c.
diff --git a/drivers/misc/lis3lv02d/Makefile b/drivers/misc/lis3lv02d/Makefile
new file mode 100644
index 000000000000..4bf58b16fcf8
--- /dev/null
+++ b/drivers/misc/lis3lv02d/Makefile
@@ -0,0 +1,7 @@
+#
+# STMicroelectonics LIS3LV02D and similar accelerometers
+#
+
+obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o
+obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d_spi.o
+obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d_i2c.o
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
new file mode 100644
index 000000000000..b928bc14e97b
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -0,0 +1,999 @@
+/*
+ * lis3lv02d.c - ST LIS3LV02DL accelerometer driver
+ *
+ * Copyright (C) 2007-2008 Yan Burman
+ * Copyright (C) 2008 Eric Piel
+ * Copyright (C) 2008-2009 Pavel Machek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input-polldev.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/freezer.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/pm_runtime.h>
+#include <linux/atomic.h>
+#include "lis3lv02d.h"
+
+#define DRIVER_NAME "lis3lv02d"
+
+/* joystick device poll interval in milliseconds */
+#define MDPS_POLL_INTERVAL 50
+#define MDPS_POLL_MIN 0
+#define MDPS_POLL_MAX 2000
+
+#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */
+
+#define SELFTEST_OK 0
+#define SELFTEST_FAIL -1
+#define SELFTEST_IRQ -2
+
+#define IRQ_LINE0 0
+#define IRQ_LINE1 1
+
+/*
+ * The sensor can also generate interrupts (DRDY) but it's pretty pointless
+ * because they are generated even if the data do not change. So it's better
+ * to keep the interrupt for the free-fall event. The values are updated at
+ * 40Hz (at the lowest frequency), but as it can be pretty time consuming on
+ * some low processor, we poll the sensor only at 20Hz... enough for the
+ * joystick.
+ */
+
+#define LIS3_PWRON_DELAY_WAI_12B (5000)
+#define LIS3_PWRON_DELAY_WAI_8B (3000)
+
+/*
+ * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG
+ * LIS302D spec says: 18 mG / digit
+ * LIS3_ACCURACY is used to increase accuracy of the intermediate
+ * calculation results.
+ */
+#define LIS3_ACCURACY 1024
+/* Sensitivity values for -2G +2G scale */
+#define LIS3_SENSITIVITY_12B ((LIS3_ACCURACY * 1000) / 1024)
+#define LIS3_SENSITIVITY_8B (18 * LIS3_ACCURACY)
+
+#define LIS3_DEFAULT_FUZZ_12B 3
+#define LIS3_DEFAULT_FLAT_12B 3
+#define LIS3_DEFAULT_FUZZ_8B 1
+#define LIS3_DEFAULT_FLAT_8B 1
+
+struct lis3lv02d lis3_dev = {
+ .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
+};
+EXPORT_SYMBOL_GPL(lis3_dev);
+
+/* just like param_set_int() but does sanity-check so that it won't point
+ * over the axis array size
+ */
+static int param_set_axis(const char *val, const struct kernel_param *kp)
+{
+ int ret = param_set_int(val, kp);
+ if (!ret) {
+ int val = *(int *)kp->arg;
+ if (val < 0)
+ val = -val;
+ if (!val || val > 3)
+ return -EINVAL;
+ }
+ return ret;
+}
+
+static struct kernel_param_ops param_ops_axis = {
+ .set = param_set_axis,
+ .get = param_get_int,
+};
+
+module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644);
+MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions");
+
+static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg)
+{
+ s8 lo;
+ if (lis3->read(lis3, reg, &lo) < 0)
+ return 0;
+
+ return lo;
+}
+
+static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg)
+{
+ u8 lo, hi;
+
+ lis3->read(lis3, reg - 1, &lo);
+ lis3->read(lis3, reg, &hi);
+ /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+ return (s16)((hi << 8) | lo);
+}
+
+/**
+ * lis3lv02d_get_axis - For the given axis, give the value converted
+ * @axis: 1,2,3 - can also be negative
+ * @hw_values: raw values returned by the hardware
+ *
+ * Returns the converted value.
+ */
+static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3])
+{
+ if (axis > 0)
+ return hw_values[axis - 1];
+ else
+ return -hw_values[-axis - 1];
+}
+
+/**
+ * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
+ * @lis3: pointer to the device struct
+ * @x: where to store the X axis value
+ * @y: where to store the Y axis value
+ * @z: where to store the Z axis value
+ *
+ * Note that 40Hz input device can eat up about 10% CPU at 800MHZ
+ */
+static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
+{
+ int position[3];
+ int i;
+
+ if (lis3->blkread) {
+ if (lis3_dev.whoami == WAI_12B) {
+ u16 data[3];
+ lis3->blkread(lis3, OUTX_L, 6, (u8 *)data);
+ for (i = 0; i < 3; i++)
+ position[i] = (s16)le16_to_cpu(data[i]);
+ } else {
+ u8 data[5];
+ /* Data: x, dummy, y, dummy, z */
+ lis3->blkread(lis3, OUTX, 5, data);
+ for (i = 0; i < 3; i++)
+ position[i] = (s8)data[i * 2];
+ }
+ } else {
+ position[0] = lis3->read_data(lis3, OUTX);
+ position[1] = lis3->read_data(lis3, OUTY);
+ position[2] = lis3->read_data(lis3, OUTZ);
+ }
+
+ for (i = 0; i < 3; i++)
+ position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY;
+
+ *x = lis3lv02d_get_axis(lis3->ac.x, position);
+ *y = lis3lv02d_get_axis(lis3->ac.y, position);
+ *z = lis3lv02d_get_axis(lis3->ac.z, position);
+}
+
+/* conversion btw sampling rate and the register values */
+static int lis3_12_rates[4] = {40, 160, 640, 2560};
+static int lis3_8_rates[2] = {100, 400};
+static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
+
+/* ODR is Output Data Rate */
+static int lis3lv02d_get_odr(void)
+{
+ u8 ctrl;
+ int shift;
+
+ lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
+ ctrl &= lis3_dev.odr_mask;
+ shift = ffs(lis3_dev.odr_mask) - 1;
+ return lis3_dev.odrs[(ctrl >> shift)];
+}
+
+static int lis3lv02d_set_odr(int rate)
+{
+ u8 ctrl;
+ int i, len, shift;
+
+ if (!rate)
+ return -EINVAL;
+
+ lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
+ ctrl &= ~lis3_dev.odr_mask;
+ len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */
+ shift = ffs(lis3_dev.odr_mask) - 1;
+
+ for (i = 0; i < len; i++)
+ if (lis3_dev.odrs[i] == rate) {
+ lis3_dev.write(&lis3_dev, CTRL_REG1,
+ ctrl | (i << shift));
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
+{
+ u8 ctlreg, reg;
+ s16 x, y, z;
+ u8 selftest;
+ int ret;
+ u8 ctrl_reg_data;
+ unsigned char irq_cfg;
+
+ mutex_lock(&lis3->mutex);
+
+ irq_cfg = lis3->irq_cfg;
+ if (lis3_dev.whoami == WAI_8B) {
+ lis3->data_ready_count[IRQ_LINE0] = 0;
+ lis3->data_ready_count[IRQ_LINE1] = 0;
+
+ /* Change interrupt cfg to data ready for selftest */
+ atomic_inc(&lis3_dev.wake_thread);
+ lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY;
+ lis3->read(lis3, CTRL_REG3, &ctrl_reg_data);
+ lis3->write(lis3, CTRL_REG3, (ctrl_reg_data &
+ ~(LIS3_IRQ1_MASK | LIS3_IRQ2_MASK)) |
+ (LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY));
+ }
+
+ if (lis3_dev.whoami == WAI_3DC) {
+ ctlreg = CTRL_REG4;
+ selftest = CTRL4_ST0;
+ } else {
+ ctlreg = CTRL_REG1;
+ if (lis3_dev.whoami == WAI_12B)
+ selftest = CTRL1_ST;
+ else
+ selftest = CTRL1_STP;
+ }
+
+ lis3->read(lis3, ctlreg, &reg);
+ lis3->write(lis3, ctlreg, (reg | selftest));
+ msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+ /* Read directly to avoid axis remap */
+ x = lis3->read_data(lis3, OUTX);
+ y = lis3->read_data(lis3, OUTY);
+ z = lis3->read_data(lis3, OUTZ);
+
+ /* back to normal settings */
+ lis3->write(lis3, ctlreg, reg);
+ msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+ results[0] = x - lis3->read_data(lis3, OUTX);
+ results[1] = y - lis3->read_data(lis3, OUTY);
+ results[2] = z - lis3->read_data(lis3, OUTZ);
+
+ ret = 0;
+
+ if (lis3_dev.whoami == WAI_8B) {
+ /* Restore original interrupt configuration */
+ atomic_dec(&lis3_dev.wake_thread);
+ lis3->write(lis3, CTRL_REG3, ctrl_reg_data);
+ lis3->irq_cfg = irq_cfg;
+
+ if ((irq_cfg & LIS3_IRQ1_MASK) &&
+ lis3->data_ready_count[IRQ_LINE0] < 2) {
+ ret = SELFTEST_IRQ;
+ goto fail;
+ }
+
+ if ((irq_cfg & LIS3_IRQ2_MASK) &&
+ lis3->data_ready_count[IRQ_LINE1] < 2) {
+ ret = SELFTEST_IRQ;
+ goto fail;
+ }
+ }
+
+ if (lis3->pdata) {
+ int i;
+ for (i = 0; i < 3; i++) {
+ /* Check against selftest acceptance limits */
+ if ((results[i] < lis3->pdata->st_min_limits[i]) ||
+ (results[i] > lis3->pdata->st_max_limits[i])) {
+ ret = SELFTEST_FAIL;
+ goto fail;
+ }
+ }
+ }
+
+ /* test passed */
+fail:
+ mutex_unlock(&lis3->mutex);
+ return ret;
+}
+
+/*
+ * Order of registers in the list affects to order of the restore process.
+ * Perhaps it is a good idea to set interrupt enable register as a last one
+ * after all other configurations
+ */
+static u8 lis3_wai8_regs[] = { FF_WU_CFG_1, FF_WU_THS_1, FF_WU_DURATION_1,
+ FF_WU_CFG_2, FF_WU_THS_2, FF_WU_DURATION_2,
+ CLICK_CFG, CLICK_SRC, CLICK_THSY_X, CLICK_THSZ,
+ CLICK_TIMELIMIT, CLICK_LATENCY, CLICK_WINDOW,
+ CTRL_REG1, CTRL_REG2, CTRL_REG3};
+
+static u8 lis3_wai12_regs[] = {FF_WU_CFG, FF_WU_THS_L, FF_WU_THS_H,
+ FF_WU_DURATION, DD_CFG, DD_THSI_L, DD_THSI_H,
+ DD_THSE_L, DD_THSE_H,
+ CTRL_REG1, CTRL_REG3, CTRL_REG2};
+
+static inline void lis3_context_save(struct lis3lv02d *lis3)
+{
+ int i;
+ for (i = 0; i < lis3->regs_size; i++)
+ lis3->read(lis3, lis3->regs[i], &lis3->reg_cache[i]);
+ lis3->regs_stored = true;
+}
+
+static inline void lis3_context_restore(struct lis3lv02d *lis3)
+{
+ int i;
+ if (lis3->regs_stored)
+ for (i = 0; i < lis3->regs_size; i++)
+ lis3->write(lis3, lis3->regs[i], lis3->reg_cache[i]);
+}
+
+void lis3lv02d_poweroff(struct lis3lv02d *lis3)
+{
+ if (lis3->reg_ctrl)
+ lis3_context_save(lis3);
+ /* disable X,Y,Z axis and power down */
+ lis3->write(lis3, CTRL_REG1, 0x00);
+ if (lis3->reg_ctrl)
+ lis3->reg_ctrl(lis3, LIS3_REG_OFF);
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
+
+void lis3lv02d_poweron(struct lis3lv02d *lis3)
+{
+ u8 reg;
+
+ lis3->init(lis3);
+
+ /*
+ * Common configuration
+ * BDU: (12 bits sensors only) LSB and MSB values are not updated until
+ * both have been read. So the value read will always be correct.
+ * Set BOOT bit to refresh factory tuning values.
+ */
+ lis3->read(lis3, CTRL_REG2, &reg);
+ if (lis3->whoami == WAI_12B)
+ reg |= CTRL2_BDU | CTRL2_BOOT;
+ else
+ reg |= CTRL2_BOOT_8B;
+ lis3->write(lis3, CTRL_REG2, reg);
+
+ /* LIS3 power on delay is quite long */
+ msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+ if (lis3->reg_ctrl)
+ lis3_context_restore(lis3);
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
+
+
+static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
+{
+ int x, y, z;
+
+ mutex_lock(&lis3_dev.mutex);
+ lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+ input_report_abs(pidev->input, ABS_X, x);
+ input_report_abs(pidev->input, ABS_Y, y);
+ input_report_abs(pidev->input, ABS_Z, z);
+ input_sync(pidev->input);
+ mutex_unlock(&lis3_dev.mutex);
+}
+
+static void lis3lv02d_joystick_open(struct input_polled_dev *pidev)
+{
+ if (lis3_dev.pm_dev)
+ pm_runtime_get_sync(lis3_dev.pm_dev);
+
+ if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev)
+ atomic_set(&lis3_dev.wake_thread, 1);
+ /*
+ * Update coordinates for the case where poll interval is 0 and
+ * the chip in running purely under interrupt control
+ */
+ lis3lv02d_joystick_poll(pidev);
+}
+
+static void lis3lv02d_joystick_close(struct input_polled_dev *pidev)
+{
+ atomic_set(&lis3_dev.wake_thread, 0);
+ if (lis3_dev.pm_dev)
+ pm_runtime_put(lis3_dev.pm_dev);
+}
+
+static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+{
+ if (!test_bit(0, &lis3_dev.misc_opened))
+ goto out;
+
+ /*
+ * Be careful: on some HP laptops the bios force DD when on battery and
+ * the lid is closed. This leads to interrupts as soon as a little move
+ * is done.
+ */
+ atomic_inc(&lis3_dev.count);
+
+ wake_up_interruptible(&lis3_dev.misc_wait);
+ kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
+out:
+ if (atomic_read(&lis3_dev.wake_thread))
+ return IRQ_WAKE_THREAD;
+ return IRQ_HANDLED;
+}
+
+static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3)
+{
+ struct input_dev *dev = lis3->idev->input;
+ u8 click_src;
+
+ mutex_lock(&lis3->mutex);
+ lis3->read(lis3, CLICK_SRC, &click_src);
+
+ if (click_src & CLICK_SINGLE_X) {
+ input_report_key(dev, lis3->mapped_btns[0], 1);
+ input_report_key(dev, lis3->mapped_btns[0], 0);
+ }
+
+ if (click_src & CLICK_SINGLE_Y) {
+ input_report_key(dev, lis3->mapped_btns[1], 1);
+ input_report_key(dev, lis3->mapped_btns[1], 0);
+ }
+
+ if (click_src & CLICK_SINGLE_Z) {
+ input_report_key(dev, lis3->mapped_btns[2], 1);
+ input_report_key(dev, lis3->mapped_btns[2], 0);
+ }
+ input_sync(dev);
+ mutex_unlock(&lis3->mutex);
+}
+
+static inline void lis302dl_data_ready(struct lis3lv02d *lis3, int index)
+{
+ int dummy;
+
+ /* Dummy read to ack interrupt */
+ lis3lv02d_get_xyz(lis3, &dummy, &dummy, &dummy);
+ lis3->data_ready_count[index]++;
+}
+
+static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data)
+{
+ struct lis3lv02d *lis3 = data;
+ u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ1_MASK;
+
+ if (irq_cfg == LIS3_IRQ1_CLICK)
+ lis302dl_interrupt_handle_click(lis3);
+ else if (unlikely(irq_cfg == LIS3_IRQ1_DATA_READY))
+ lis302dl_data_ready(lis3, IRQ_LINE0);
+ else
+ lis3lv02d_joystick_poll(lis3->idev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data)
+{
+ struct lis3lv02d *lis3 = data;
+ u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ2_MASK;
+
+ if (irq_cfg == LIS3_IRQ2_CLICK)
+ lis302dl_interrupt_handle_click(lis3);
+ else if (unlikely(irq_cfg == LIS3_IRQ2_DATA_READY))
+ lis302dl_data_ready(lis3, IRQ_LINE1);
+ else
+ lis3lv02d_joystick_poll(lis3->idev);
+
+ return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &lis3_dev.misc_opened))
+ return -EBUSY; /* already open */
+
+ if (lis3_dev.pm_dev)
+ pm_runtime_get_sync(lis3_dev.pm_dev);
+
+ atomic_set(&lis3_dev.count, 0);
+ return 0;
+}
+
+static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+{
+ fasync_helper(-1, file, 0, &lis3_dev.async_queue);
+ clear_bit(0, &lis3_dev.misc_opened); /* release the device */
+ if (lis3_dev.pm_dev)
+ pm_runtime_put(lis3_dev.pm_dev);
+ return 0;
+}
+
+static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ u32 data;
+ unsigned char byte_data;
+ ssize_t retval = 1;
+
+ if (count < 1)
+ return -EINVAL;
+
+ add_wait_queue(&lis3_dev.misc_wait, &wait);
+ while (true) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ data = atomic_xchg(&lis3_dev.count, 0);
+ if (data)
+ break;
+
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ goto out;
+ }
+
+ schedule();
+ }
+
+ if (data < 255)
+ byte_data = data;
+ else
+ byte_data = 255;
+
+ /* make sure we are not going into copy_to_user() with
+ * TASK_INTERRUPTIBLE state */
+ set_current_state(TASK_RUNNING);
+ if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+ retval = -EFAULT;
+
+out:
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&lis3_dev.misc_wait, &wait);
+
+ return retval;
+}
+
+static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &lis3_dev.misc_wait, wait);
+ if (atomic_read(&lis3_dev.count))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+{
+ return fasync_helper(fd, file, on, &lis3_dev.async_queue);
+}
+
+static const struct file_operations lis3lv02d_misc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = lis3lv02d_misc_read,
+ .open = lis3lv02d_misc_open,
+ .release = lis3lv02d_misc_release,
+ .poll = lis3lv02d_misc_poll,
+ .fasync = lis3lv02d_misc_fasync,
+};
+
+static struct miscdevice lis3lv02d_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "freefall",
+ .fops = &lis3lv02d_misc_fops,
+};
+
+int lis3lv02d_joystick_enable(void)
+{
+ struct input_dev *input_dev;
+ int err;
+ int max_val, fuzz, flat;
+ int btns[] = {BTN_X, BTN_Y, BTN_Z};
+
+ if (lis3_dev.idev)
+ return -EINVAL;
+
+ lis3_dev.idev = input_allocate_polled_device();
+ if (!lis3_dev.idev)
+ return -ENOMEM;
+
+ lis3_dev.idev->poll = lis3lv02d_joystick_poll;
+ lis3_dev.idev->open = lis3lv02d_joystick_open;
+ lis3_dev.idev->close = lis3lv02d_joystick_close;
+ lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
+ lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN;
+ lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX;
+ input_dev = lis3_dev.idev->input;
+
+ input_dev->name = "ST LIS3LV02DL Accelerometer";
+ input_dev->phys = DRIVER_NAME "/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0;
+ input_dev->dev.parent = &lis3_dev.pdev->dev;
+
+ set_bit(EV_ABS, input_dev->evbit);
+ max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY;
+ if (lis3_dev.whoami == WAI_12B) {
+ fuzz = LIS3_DEFAULT_FUZZ_12B;
+ flat = LIS3_DEFAULT_FLAT_12B;
+ } else {
+ fuzz = LIS3_DEFAULT_FUZZ_8B;
+ flat = LIS3_DEFAULT_FLAT_8B;
+ }
+ fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY;
+ flat = (flat * lis3_dev.scale) / LIS3_ACCURACY;
+
+ input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat);
+ input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat);
+ input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat);
+
+ lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns);
+ lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns);
+ lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns);
+
+ err = input_register_polled_device(lis3_dev.idev);
+ if (err) {
+ input_free_polled_device(lis3_dev.idev);
+ lis3_dev.idev = NULL;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable);
+
+void lis3lv02d_joystick_disable(void)
+{
+ if (lis3_dev.irq)
+ free_irq(lis3_dev.irq, &lis3_dev);
+ if (lis3_dev.pdata && lis3_dev.pdata->irq2)
+ free_irq(lis3_dev.pdata->irq2, &lis3_dev);
+
+ if (!lis3_dev.idev)
+ return;
+
+ if (lis3_dev.irq)
+ misc_deregister(&lis3lv02d_misc_device);
+ input_unregister_polled_device(lis3_dev.idev);
+ input_free_polled_device(lis3_dev.idev);
+ lis3_dev.idev = NULL;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
+
+/* Sysfs stuff */
+static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3)
+{
+ /*
+ * SYSFS functions are fast visitors so put-call
+ * immediately after the get-call. However, keep
+ * chip running for a while and schedule delayed
+ * suspend. This way periodic sysfs calls doesn't
+ * suffer from relatively long power up time.
+ */
+
+ if (lis3->pm_dev) {
+ pm_runtime_get_sync(lis3->pm_dev);
+ pm_runtime_put_noidle(lis3->pm_dev);
+ pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY);
+ }
+}
+
+static ssize_t lis3lv02d_selftest_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ s16 values[3];
+
+ static const char ok[] = "OK";
+ static const char fail[] = "FAIL";
+ static const char irq[] = "FAIL_IRQ";
+ const char *res;
+
+ lis3lv02d_sysfs_poweron(&lis3_dev);
+ switch (lis3lv02d_selftest(&lis3_dev, values)) {
+ case SELFTEST_FAIL:
+ res = fail;
+ break;
+ case SELFTEST_IRQ:
+ res = irq;
+ break;
+ case SELFTEST_OK:
+ default:
+ res = ok;
+ break;
+ }
+ return sprintf(buf, "%s %d %d %d\n", res,
+ values[0], values[1], values[2]);
+}
+
+static ssize_t lis3lv02d_position_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int x, y, z;
+
+ lis3lv02d_sysfs_poweron(&lis3_dev);
+ mutex_lock(&lis3_dev.mutex);
+ lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+ mutex_unlock(&lis3_dev.mutex);
+ return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
+}
+
+static ssize_t lis3lv02d_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ lis3lv02d_sysfs_poweron(&lis3_dev);
+ return sprintf(buf, "%d\n", lis3lv02d_get_odr());
+}
+
+static ssize_t lis3lv02d_rate_set(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ unsigned long rate;
+
+ if (strict_strtoul(buf, 0, &rate))
+ return -EINVAL;
+
+ lis3lv02d_sysfs_poweron(&lis3_dev);
+ if (lis3lv02d_set_odr(rate))
+ return -EINVAL;
+
+ return count;
+}
+
+static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL);
+static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
+static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show,
+ lis3lv02d_rate_set);
+
+static struct attribute *lis3lv02d_attributes[] = {
+ &dev_attr_selftest.attr,
+ &dev_attr_position.attr,
+ &dev_attr_rate.attr,
+ NULL
+};
+
+static struct attribute_group lis3lv02d_attribute_group = {
+ .attrs = lis3lv02d_attributes
+};
+
+
+static int lis3lv02d_add_fs(struct lis3lv02d *lis3)
+{
+ lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+ if (IS_ERR(lis3->pdev))
+ return PTR_ERR(lis3->pdev);
+
+ return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
+}
+
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3)
+{
+ sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
+ platform_device_unregister(lis3->pdev);
+ if (lis3->pm_dev) {
+ /* Barrier after the sysfs remove */
+ pm_runtime_barrier(lis3->pm_dev);
+
+ /* SYSFS may have left chip running. Turn off if necessary */
+ if (!pm_runtime_suspended(lis3->pm_dev))
+ lis3lv02d_poweroff(&lis3_dev);
+
+ pm_runtime_disable(lis3->pm_dev);
+ pm_runtime_set_suspended(lis3->pm_dev);
+ }
+ kfree(lis3->reg_cache);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
+
+static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
+ struct lis3lv02d_platform_data *p)
+{
+ int err;
+ int ctrl2 = p->hipass_ctrl;
+
+ if (p->click_flags) {
+ dev->write(dev, CLICK_CFG, p->click_flags);
+ dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit);
+ dev->write(dev, CLICK_LATENCY, p->click_latency);
+ dev->write(dev, CLICK_WINDOW, p->click_window);
+ dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf);
+ dev->write(dev, CLICK_THSY_X,
+ (p->click_thresh_x & 0xf) |
+ (p->click_thresh_y << 4));
+
+ if (dev->idev) {
+ struct input_dev *input_dev = lis3_dev.idev->input;
+ input_set_capability(input_dev, EV_KEY, BTN_X);
+ input_set_capability(input_dev, EV_KEY, BTN_Y);
+ input_set_capability(input_dev, EV_KEY, BTN_Z);
+ }
+ }
+
+ if (p->wakeup_flags) {
+ dev->write(dev, FF_WU_CFG_1, p->wakeup_flags);
+ dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f);
+ /* pdata value + 1 to keep this backward compatible*/
+ dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1);
+ ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/
+ }
+
+ if (p->wakeup_flags2) {
+ dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2);
+ dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f);
+ /* pdata value + 1 to keep this backward compatible*/
+ dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1);
+ ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/
+ }
+ /* Configure hipass filters */
+ dev->write(dev, CTRL_REG2, ctrl2);
+
+ if (p->irq2) {
+ err = request_threaded_irq(p->irq2,
+ NULL,
+ lis302dl_interrupt_thread2_8b,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT |
+ (p->irq_flags2 & IRQF_TRIGGER_MASK),
+ DRIVER_NAME, &lis3_dev);
+ if (err < 0)
+ pr_err("No second IRQ. Limited functionality\n");
+ }
+}
+
+/*
+ * Initialise the accelerometer and the various subsystems.
+ * Should be rather independent of the bus system.
+ */
+int lis3lv02d_init_device(struct lis3lv02d *dev)
+{
+ int err;
+ irq_handler_t thread_fn;
+ int irq_flags = 0;
+
+ dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
+
+ switch (dev->whoami) {
+ case WAI_12B:
+ pr_info("12 bits sensor found\n");
+ dev->read_data = lis3lv02d_read_12;
+ dev->mdps_max_val = 2048;
+ dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
+ dev->odrs = lis3_12_rates;
+ dev->odr_mask = CTRL1_DF0 | CTRL1_DF1;
+ dev->scale = LIS3_SENSITIVITY_12B;
+ dev->regs = lis3_wai12_regs;
+ dev->regs_size = ARRAY_SIZE(lis3_wai12_regs);
+ break;
+ case WAI_8B:
+ pr_info("8 bits sensor found\n");
+ dev->read_data = lis3lv02d_read_8;
+ dev->mdps_max_val = 128;
+ dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+ dev->odrs = lis3_8_rates;
+ dev->odr_mask = CTRL1_DR;
+ dev->scale = LIS3_SENSITIVITY_8B;
+ dev->regs = lis3_wai8_regs;
+ dev->regs_size = ARRAY_SIZE(lis3_wai8_regs);
+ break;
+ case WAI_3DC:
+ pr_info("8 bits 3DC sensor found\n");
+ dev->read_data = lis3lv02d_read_8;
+ dev->mdps_max_val = 128;
+ dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+ dev->odrs = lis3_3dc_rates;
+ dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
+ dev->scale = LIS3_SENSITIVITY_8B;
+ break;
+ default:
+ pr_err("unknown sensor type 0x%X\n", dev->whoami);
+ return -EINVAL;
+ }
+
+ dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs),
+ sizeof(lis3_wai12_regs)), GFP_KERNEL);
+
+ if (dev->reg_cache == NULL) {
+ printk(KERN_ERR DRIVER_NAME "out of memory\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&dev->mutex);
+ atomic_set(&dev->wake_thread, 0);
+
+ lis3lv02d_add_fs(dev);
+ lis3lv02d_poweron(dev);
+
+ if (dev->pm_dev) {
+ pm_runtime_set_active(dev->pm_dev);
+ pm_runtime_enable(dev->pm_dev);
+ }
+
+ if (lis3lv02d_joystick_enable())
+ pr_err("joystick initialization failed\n");
+
+ /* passing in platform specific data is purely optional and only
+ * used by the SPI transport layer at the moment */
+ if (dev->pdata) {
+ struct lis3lv02d_platform_data *p = dev->pdata;
+
+ if (dev->whoami == WAI_8B)
+ lis3lv02d_8b_configure(dev, p);
+
+ irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK;
+
+ dev->irq_cfg = p->irq_cfg;
+ if (p->irq_cfg)
+ dev->write(dev, CTRL_REG3, p->irq_cfg);
+
+ if (p->default_rate)
+ lis3lv02d_set_odr(p->default_rate);
+ }
+
+ /* bail if we did not get an IRQ from the bus layer */
+ if (!dev->irq) {
+ pr_debug("No IRQ. Disabling /dev/freefall\n");
+ goto out;
+ }
+
+ /*
+ * The sensor can generate interrupts for free-fall and direction
+ * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+ * the things simple and _fast_ we activate it only for free-fall, so
+ * no need to read register (very slow with ACPI). For the same reason,
+ * we forbid shared interrupts.
+ *
+ * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+ * io-apic is not configurable (and generates a warning) but I keep it
+ * in case of support for other hardware.
+ */
+ if (dev->pdata && dev->whoami == WAI_8B)
+ thread_fn = lis302dl_interrupt_thread1_8b;
+ else
+ thread_fn = NULL;
+
+ err = request_threaded_irq(dev->irq, lis302dl_interrupt,
+ thread_fn,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT |
+ irq_flags,
+ DRIVER_NAME, &lis3_dev);
+
+ if (err < 0) {
+ pr_err("Cannot get IRQ\n");
+ goto out;
+ }
+
+ if (misc_register(&lis3lv02d_misc_device))
+ pr_err("misc_register failed\n");
+out:
+ return 0;
+}
+EXPORT_SYMBOL_GPL(lis3lv02d_init_device);
+
+MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
+MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
new file mode 100644
index 000000000000..a1939589eb2c
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -0,0 +1,291 @@
+/*
+ * lis3lv02d.h - ST LIS3LV02DL accelerometer driver
+ *
+ * Copyright (C) 2007-2008 Yan Burman
+ * Copyright (C) 2008-2009 Eric Piel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/platform_device.h>
+#include <linux/input-polldev.h>
+#include <linux/regulator/consumer.h>
+
+/*
+ * This driver tries to support the "digital" accelerometer chips from
+ * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL,
+ * LIS35DE, or LIS202DL. They are very similar in terms of programming, with
+ * almost the same registers. In addition to differing on physical properties,
+ * they differ on the number of axes (2/3), precision (8/12 bits), and special
+ * features (freefall detection, click...). Unfortunately, not all the
+ * differences can be probed via a register.
+ * They can be connected either via I²C or SPI.
+ */
+
+#include <linux/lis3lv02d.h>
+
+enum lis3_reg {
+ WHO_AM_I = 0x0F,
+ OFFSET_X = 0x16,
+ OFFSET_Y = 0x17,
+ OFFSET_Z = 0x18,
+ GAIN_X = 0x19,
+ GAIN_Y = 0x1A,
+ GAIN_Z = 0x1B,
+ CTRL_REG1 = 0x20,
+ CTRL_REG2 = 0x21,
+ CTRL_REG3 = 0x22,
+ CTRL_REG4 = 0x23,
+ HP_FILTER_RESET = 0x23,
+ STATUS_REG = 0x27,
+ OUTX_L = 0x28,
+ OUTX_H = 0x29,
+ OUTX = 0x29,
+ OUTY_L = 0x2A,
+ OUTY_H = 0x2B,
+ OUTY = 0x2B,
+ OUTZ_L = 0x2C,
+ OUTZ_H = 0x2D,
+ OUTZ = 0x2D,
+};
+
+enum lis302d_reg {
+ FF_WU_CFG_1 = 0x30,
+ FF_WU_SRC_1 = 0x31,
+ FF_WU_THS_1 = 0x32,
+ FF_WU_DURATION_1 = 0x33,
+ FF_WU_CFG_2 = 0x34,
+ FF_WU_SRC_2 = 0x35,
+ FF_WU_THS_2 = 0x36,
+ FF_WU_DURATION_2 = 0x37,
+ CLICK_CFG = 0x38,
+ CLICK_SRC = 0x39,
+ CLICK_THSY_X = 0x3B,
+ CLICK_THSZ = 0x3C,
+ CLICK_TIMELIMIT = 0x3D,
+ CLICK_LATENCY = 0x3E,
+ CLICK_WINDOW = 0x3F,
+};
+
+enum lis3lv02d_reg {
+ FF_WU_CFG = 0x30,
+ FF_WU_SRC = 0x31,
+ FF_WU_ACK = 0x32,
+ FF_WU_THS_L = 0x34,
+ FF_WU_THS_H = 0x35,
+ FF_WU_DURATION = 0x36,
+ DD_CFG = 0x38,
+ DD_SRC = 0x39,
+ DD_ACK = 0x3A,
+ DD_THSI_L = 0x3C,
+ DD_THSI_H = 0x3D,
+ DD_THSE_L = 0x3E,
+ DD_THSE_H = 0x3F,
+};
+
+enum lis3_who_am_i {
+ WAI_3DC = 0x33, /* 8 bits: LIS3DC, HP3DC */
+ WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
+ WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
+ WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */
+};
+
+enum lis3lv02d_ctrl1_12b {
+ CTRL1_Xen = 0x01,
+ CTRL1_Yen = 0x02,
+ CTRL1_Zen = 0x04,
+ CTRL1_ST = 0x08,
+ CTRL1_DF0 = 0x10,
+ CTRL1_DF1 = 0x20,
+ CTRL1_PD0 = 0x40,
+ CTRL1_PD1 = 0x80,
+};
+
+/* Delta to ctrl1_12b version */
+enum lis3lv02d_ctrl1_8b {
+ CTRL1_STM = 0x08,
+ CTRL1_STP = 0x10,
+ CTRL1_FS = 0x20,
+ CTRL1_PD = 0x40,
+ CTRL1_DR = 0x80,
+};
+
+enum lis3lv02d_ctrl1_3dc {
+ CTRL1_ODR0 = 0x10,
+ CTRL1_ODR1 = 0x20,
+ CTRL1_ODR2 = 0x40,
+ CTRL1_ODR3 = 0x80,
+};
+
+enum lis3lv02d_ctrl2 {
+ CTRL2_DAS = 0x01,
+ CTRL2_SIM = 0x02,
+ CTRL2_DRDY = 0x04,
+ CTRL2_IEN = 0x08,
+ CTRL2_BOOT = 0x10,
+ CTRL2_BLE = 0x20,
+ CTRL2_BDU = 0x40, /* Block Data Update */
+ CTRL2_FS = 0x80, /* Full Scale selection */
+};
+
+enum lis3lv02d_ctrl4_3dc {
+ CTRL4_SIM = 0x01,
+ CTRL4_ST0 = 0x02,
+ CTRL4_ST1 = 0x04,
+ CTRL4_FS0 = 0x10,
+ CTRL4_FS1 = 0x20,
+};
+
+enum lis302d_ctrl2 {
+ HP_FF_WU2 = 0x08,
+ HP_FF_WU1 = 0x04,
+ CTRL2_BOOT_8B = 0x40,
+};
+
+enum lis3lv02d_ctrl3 {
+ CTRL3_CFS0 = 0x01,
+ CTRL3_CFS1 = 0x02,
+ CTRL3_FDS = 0x10,
+ CTRL3_HPFF = 0x20,
+ CTRL3_HPDD = 0x40,
+ CTRL3_ECK = 0x80,
+};
+
+enum lis3lv02d_status_reg {
+ STATUS_XDA = 0x01,
+ STATUS_YDA = 0x02,
+ STATUS_ZDA = 0x04,
+ STATUS_XYZDA = 0x08,
+ STATUS_XOR = 0x10,
+ STATUS_YOR = 0x20,
+ STATUS_ZOR = 0x40,
+ STATUS_XYZOR = 0x80,
+};
+
+enum lis3lv02d_ff_wu_cfg {
+ FF_WU_CFG_XLIE = 0x01,
+ FF_WU_CFG_XHIE = 0x02,
+ FF_WU_CFG_YLIE = 0x04,
+ FF_WU_CFG_YHIE = 0x08,
+ FF_WU_CFG_ZLIE = 0x10,
+ FF_WU_CFG_ZHIE = 0x20,
+ FF_WU_CFG_LIR = 0x40,
+ FF_WU_CFG_AOI = 0x80,
+};
+
+enum lis3lv02d_ff_wu_src {
+ FF_WU_SRC_XL = 0x01,
+ FF_WU_SRC_XH = 0x02,
+ FF_WU_SRC_YL = 0x04,
+ FF_WU_SRC_YH = 0x08,
+ FF_WU_SRC_ZL = 0x10,
+ FF_WU_SRC_ZH = 0x20,
+ FF_WU_SRC_IA = 0x40,
+};
+
+enum lis3lv02d_dd_cfg {
+ DD_CFG_XLIE = 0x01,
+ DD_CFG_XHIE = 0x02,
+ DD_CFG_YLIE = 0x04,
+ DD_CFG_YHIE = 0x08,
+ DD_CFG_ZLIE = 0x10,
+ DD_CFG_ZHIE = 0x20,
+ DD_CFG_LIR = 0x40,
+ DD_CFG_IEND = 0x80,
+};
+
+enum lis3lv02d_dd_src {
+ DD_SRC_XL = 0x01,
+ DD_SRC_XH = 0x02,
+ DD_SRC_YL = 0x04,
+ DD_SRC_YH = 0x08,
+ DD_SRC_ZL = 0x10,
+ DD_SRC_ZH = 0x20,
+ DD_SRC_IA = 0x40,
+};
+
+enum lis3lv02d_click_src_8b {
+ CLICK_SINGLE_X = 0x01,
+ CLICK_DOUBLE_X = 0x02,
+ CLICK_SINGLE_Y = 0x04,
+ CLICK_DOUBLE_Y = 0x08,
+ CLICK_SINGLE_Z = 0x10,
+ CLICK_DOUBLE_Z = 0x20,
+ CLICK_IA = 0x40,
+};
+
+enum lis3lv02d_reg_state {
+ LIS3_REG_OFF = 0x00,
+ LIS3_REG_ON = 0x01,
+};
+
+union axis_conversion {
+ struct {
+ int x, y, z;
+ };
+ int as_array[3];
+
+};
+
+struct lis3lv02d {
+ void *bus_priv; /* used by the bus layer only */
+ struct device *pm_dev; /* for pm_runtime purposes */
+ int (*init) (struct lis3lv02d *lis3);
+ int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
+ int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
+ int (*blkread) (struct lis3lv02d *lis3, int reg, int len, u8 *ret);
+ int (*reg_ctrl) (struct lis3lv02d *lis3, bool state);
+
+ int *odrs; /* Supported output data rates */
+ u8 *regs; /* Regs to store / restore */
+ int regs_size;
+ u8 *reg_cache;
+ bool regs_stored;
+ u8 odr_mask; /* ODR bit mask */
+ u8 whoami; /* indicates measurement precision */
+ s16 (*read_data) (struct lis3lv02d *lis3, int reg);
+ int mdps_max_val;
+ int pwron_delay;
+ int scale; /*
+ * relationship between 1 LBS and mG
+ * (1/1000th of earth gravity)
+ */
+
+ struct input_polled_dev *idev; /* input device */
+ struct platform_device *pdev; /* platform device */
+ struct regulator_bulk_data regulators[2];
+ atomic_t count; /* interrupt count after last read */
+ union axis_conversion ac; /* hw -> logical axis */
+ int mapped_btns[3];
+
+ u32 irq; /* IRQ number */
+ struct fasync_struct *async_queue; /* queue for the misc device */
+ wait_queue_head_t misc_wait; /* Wait queue for the misc device */
+ unsigned long misc_opened; /* bit0: whether the device is open */
+ int data_ready_count[2];
+ atomic_t wake_thread;
+ unsigned char irq_cfg;
+
+ struct lis3lv02d_platform_data *pdata; /* for passing board config */
+ struct mutex mutex; /* Serialize poll and selftest */
+};
+
+int lis3lv02d_init_device(struct lis3lv02d *lis3);
+int lis3lv02d_joystick_enable(void);
+void lis3lv02d_joystick_disable(void);
+void lis3lv02d_poweroff(struct lis3lv02d *lis3);
+void lis3lv02d_poweron(struct lis3lv02d *lis3);
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
+
+extern struct lis3lv02d lis3_dev;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
new file mode 100644
index 000000000000..b20dfb4522d2
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -0,0 +1,279 @@
+/*
+ * drivers/hwmon/lis3lv02d_i2c.c
+ *
+ * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
+ * Driver is based on corresponding SPI driver written by Daniel Mack
+ * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ).
+ *
+ * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include "lis3lv02d.h"
+
+#define DRV_NAME "lis3lv02d_i2c"
+
+static const char reg_vdd[] = "Vdd";
+static const char reg_vdd_io[] = "Vdd_IO";
+
+static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state)
+{
+ int ret;
+ if (state == LIS3_REG_OFF) {
+ ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators),
+ lis3->regulators);
+ } else {
+ ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators),
+ lis3->regulators);
+ /* Chip needs time to wakeup. Not mentioned in datasheet */
+ usleep_range(10000, 20000);
+ }
+ return ret;
+}
+
+static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
+{
+ struct i2c_client *c = lis3->bus_priv;
+ return i2c_smbus_write_byte_data(c, reg, value);
+}
+
+static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
+{
+ struct i2c_client *c = lis3->bus_priv;
+ *v = i2c_smbus_read_byte_data(c, reg);
+ return 0;
+}
+
+static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len,
+ u8 *v)
+{
+ struct i2c_client *c = lis3->bus_priv;
+ reg |= (1 << 7); /* 7th bit enables address auto incrementation */
+ return i2c_smbus_read_i2c_block_data(c, reg, len, v);
+}
+
+static int lis3_i2c_init(struct lis3lv02d *lis3)
+{
+ u8 reg;
+ int ret;
+
+ if (lis3->reg_ctrl)
+ lis3_reg_ctrl(lis3, LIS3_REG_ON);
+
+ lis3->read(lis3, WHO_AM_I, &reg);
+ if (reg != lis3->whoami)
+ printk(KERN_ERR "lis3: power on failure\n");
+
+ /* power up the device */
+ ret = lis3->read(lis3, CTRL_REG1, &reg);
+ if (ret < 0)
+ return ret;
+
+ reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
+ return lis3->write(lis3, CTRL_REG1, reg);
+}
+
+/* Default axis mapping but it can be overwritten by platform data */
+static union axis_conversion lis3lv02d_axis_map =
+ { .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } };
+
+static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
+
+ if (pdata) {
+ /* Regulator control is optional */
+ if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL)
+ lis3_dev.reg_ctrl = lis3_reg_ctrl;
+
+ if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
+ (i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_I2C_BLOCK)))
+ lis3_dev.blkread = lis3_i2c_blockread;
+
+ if (pdata->axis_x)
+ lis3lv02d_axis_map.x = pdata->axis_x;
+
+ if (pdata->axis_y)
+ lis3lv02d_axis_map.y = pdata->axis_y;
+
+ if (pdata->axis_z)
+ lis3lv02d_axis_map.z = pdata->axis_z;
+
+ if (pdata->setup_resources)
+ ret = pdata->setup_resources();
+
+ if (ret)
+ goto fail;
+ }
+
+ if (lis3_dev.reg_ctrl) {
+ lis3_dev.regulators[0].supply = reg_vdd;
+ lis3_dev.regulators[1].supply = reg_vdd_io;
+ ret = regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(lis3_dev.regulators),
+ lis3_dev.regulators);
+ if (ret < 0)
+ goto fail;
+ }
+
+ lis3_dev.pdata = pdata;
+ lis3_dev.bus_priv = client;
+ lis3_dev.init = lis3_i2c_init;
+ lis3_dev.read = lis3_i2c_read;
+ lis3_dev.write = lis3_i2c_write;
+ lis3_dev.irq = client->irq;
+ lis3_dev.ac = lis3lv02d_axis_map;
+ lis3_dev.pm_dev = &client->dev;
+
+ i2c_set_clientdata(client, &lis3_dev);
+
+ /* Provide power over the init call */
+ if (lis3_dev.reg_ctrl)
+ lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
+
+ ret = lis3lv02d_init_device(&lis3_dev);
+
+ if (lis3_dev.reg_ctrl)
+ lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
+
+ if (ret == 0)
+ return 0;
+fail:
+ if (pdata && pdata->release_resources)
+ pdata->release_resources();
+ return ret;
+}
+
+static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
+{
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+ struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
+
+ if (pdata && pdata->release_resources)
+ pdata->release_resources();
+
+ lis3lv02d_joystick_disable();
+ lis3lv02d_remove_fs(&lis3_dev);
+
+ if (lis3_dev.reg_ctrl)
+ regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
+ lis3_dev.regulators);
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lis3lv02d_i2c_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+ lis3lv02d_poweroff(lis3);
+ return 0;
+}
+
+static int lis3lv02d_i2c_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+ /*
+ * pm_runtime documentation says that devices should always
+ * be powered on at resume. Pm_runtime turns them off after system
+ * wide resume is complete.
+ */
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
+ pm_runtime_suspended(dev))
+ lis3lv02d_poweron(lis3);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_RUNTIME
+static int lis3_i2c_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+ lis3lv02d_poweroff(lis3);
+ return 0;
+}
+
+static int lis3_i2c_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+ lis3lv02d_poweron(lis3);
+ return 0;
+}
+#endif /* CONFIG_PM_RUNTIME */
+
+static const struct i2c_device_id lis3lv02d_id[] = {
+ {"lis3lv02d", 0 },
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
+
+static const struct dev_pm_ops lis3_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
+ lis3lv02d_i2c_resume)
+ SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
+ lis3_i2c_runtime_resume,
+ NULL)
+};
+
+static struct i2c_driver lis3lv02d_i2c_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = &lis3_pm_ops,
+ },
+ .probe = lis3lv02d_i2c_probe,
+ .remove = __devexit_p(lis3lv02d_i2c_remove),
+ .id_table = lis3lv02d_id,
+};
+
+static int __init lis3lv02d_init(void)
+{
+ return i2c_add_driver(&lis3lv02d_i2c_driver);
+}
+
+static void __exit lis3lv02d_exit(void)
+{
+ i2c_del_driver(&lis3lv02d_i2c_driver);
+}
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("lis3lv02d I2C interface");
+MODULE_LICENSE("GPL");
+
+module_init(lis3lv02d_init);
+module_exit(lis3lv02d_exit);
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
new file mode 100644
index 000000000000..c1f8a8fbf694
--- /dev/null
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -0,0 +1,145 @@
+/*
+ * lis3lv02d_spi - SPI glue layer for lis3lv02d
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+#include <linux/pm.h>
+
+#include "lis3lv02d.h"
+
+#define DRV_NAME "lis3lv02d_spi"
+#define LIS3_SPI_READ 0x80
+
+static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v)
+{
+ struct spi_device *spi = lis3->bus_priv;
+ int ret = spi_w8r8(spi, reg | LIS3_SPI_READ);
+ if (ret < 0)
+ return -EINVAL;
+
+ *v = (u8) ret;
+ return 0;
+}
+
+static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val)
+{
+ u8 tmp[2] = { reg, val };
+ struct spi_device *spi = lis3->bus_priv;
+ return spi_write(spi, tmp, sizeof(tmp));
+}
+
+static int lis3_spi_init(struct lis3lv02d *lis3)
+{
+ u8 reg;
+ int ret;
+
+ /* power up the device */
+ ret = lis3->read(lis3, CTRL_REG1, &reg);
+ if (ret < 0)
+ return ret;
+
+ reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
+ return lis3->write(lis3, CTRL_REG1, reg);
+}
+
+static union axis_conversion lis3lv02d_axis_normal =
+ { .as_array = { 1, 2, 3 } };
+
+static int __devinit lis302dl_spi_probe(struct spi_device *spi)
+{
+ int ret;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_0;
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ lis3_dev.bus_priv = spi;
+ lis3_dev.init = lis3_spi_init;
+ lis3_dev.read = lis3_spi_read;
+ lis3_dev.write = lis3_spi_write;
+ lis3_dev.irq = spi->irq;
+ lis3_dev.ac = lis3lv02d_axis_normal;
+ lis3_dev.pdata = spi->dev.platform_data;
+ spi_set_drvdata(spi, &lis3_dev);
+
+ return lis3lv02d_init_device(&lis3_dev);
+}
+
+static int __devexit lis302dl_spi_remove(struct spi_device *spi)
+{
+ struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+ lis3lv02d_joystick_disable();
+ lis3lv02d_poweroff(lis3);
+
+ return lis3lv02d_remove_fs(&lis3_dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lis3lv02d_spi_suspend(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+ lis3lv02d_poweroff(&lis3_dev);
+
+ return 0;
+}
+
+static int lis3lv02d_spi_resume(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+
+ if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+ lis3lv02d_poweron(lis3);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lis3lv02d_spi_pm, lis3lv02d_spi_suspend,
+ lis3lv02d_spi_resume);
+
+static struct spi_driver lis302dl_spi_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = &lis3lv02d_spi_pm,
+ },
+ .probe = lis302dl_spi_probe,
+ .remove = __devexit_p(lis302dl_spi_remove),
+};
+
+static int __init lis302dl_init(void)
+{
+ return spi_register_driver(&lis302dl_spi_driver);
+}
+
+static void __exit lis302dl_exit(void)
+{
+ spi_unregister_driver(&lis302dl_spi_driver);
+}
+
+module_init(lis302dl_init);
+module_exit(lis302dl_exit);
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("lis3lv02d SPI glue layer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 744b804aca15..a19cb710a246 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -27,13 +27,19 @@
#include <linux/mutex.h>
#include <linux/if_ether.h>
#include <linux/ctype.h>
+#include <linux/dmi.h>
#define PHUB_STATUS 0x00 /* Status Register offset */
#define PHUB_CONTROL 0x04 /* Control Register offset */
#define PHUB_TIMEOUT 0x05 /* Time out value for Status Register */
#define PCH_PHUB_ROM_WRITE_ENABLE 0x01 /* Enabling for writing ROM */
#define PCH_PHUB_ROM_WRITE_DISABLE 0x00 /* Disabling for writing ROM */
-#define PCH_PHUB_ROM_START_ADDR 0x14 /* ROM data area start address offset */
+#define PCH_PHUB_MAC_START_ADDR 0x20C /* MAC data area start address offset */
+#define PCH_PHUB_ROM_START_ADDR_EG20T 0x14 /* ROM data area start address offset
+ (Intel EG20T PCH)*/
+#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
+ offset(OKI SEMICONDUCTOR ML7213)
+ */
/* MAX number of INT_REDUCE_CONTROL registers */
#define MAX_NUM_INT_REDUCE_CONTROL_REG 128
@@ -41,6 +47,21 @@
#define PCH_MINOR_NOS 1
#define CLKCFG_CAN_50MHZ 0x12000000
#define CLKCFG_CANCLK_MASK 0xFF000000
+#define CLKCFG_UART_MASK 0xFFFFFF
+
+/* CM-iTC */
+#define CLKCFG_UART_48MHZ (1 << 16)
+#define CLKCFG_BAUDDIV (2 << 20)
+#define CLKCFG_PLL2VCO (8 << 9)
+#define CLKCFG_UARTCLKSEL (1 << 18)
+
+/* Macros for ML7213 */
+#define PCI_VENDOR_ID_ROHM 0x10db
+#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A
+
+/* Macros for ML7213 */
+#define PCI_VENDOR_ID_ROHM 0x10db
+#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A
/* SROM ACCESS Macro */
#define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
@@ -298,7 +319,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip,
{
unsigned int mem_addr;
- mem_addr = PCH_PHUB_ROM_START_ADDR +
+ mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
pch_phub_mac_offset[offset_address];
pch_phub_read_serial_rom(chip, mem_addr, data);
@@ -315,7 +336,7 @@ static int pch_phub_write_serial_rom_val(struct pch_phub_reg *chip,
int retval;
unsigned int mem_addr;
- mem_addr = PCH_PHUB_ROM_START_ADDR +
+ mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
pch_phub_mac_offset[offset_address];
retval = pch_phub_write_serial_rom(chip, mem_addr, data);
@@ -594,23 +615,46 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
"pch_phub_extrom_base_address variable is %p\n", __func__,
chip->pch_phub_extrom_base_address);
- pci_set_drvdata(pdev, chip);
-
- retval = sysfs_create_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
- if (retval)
- goto err_sysfs_create;
-
- retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
- if (retval)
- goto exit_bin_attr;
-
- pch_phub_read_modify_write_reg(chip, (unsigned int)CLKCFG_REG_OFFSET,
- CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK);
+ if (id->driver_data == 1) {
+ retval = sysfs_create_file(&pdev->dev.kobj,
+ &dev_attr_pch_mac.attr);
+ if (retval)
+ goto err_sysfs_create;
- /* set the prefech value */
- iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
- /* set the interrupt delay value */
- iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+ if (retval)
+ goto exit_bin_attr;
+
+ pch_phub_read_modify_write_reg(chip,
+ (unsigned int)CLKCFG_REG_OFFSET,
+ CLKCFG_CAN_50MHZ,
+ CLKCFG_CANCLK_MASK);
+
+ /* quirk for CM-iTC board */
+ if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+ pch_phub_read_modify_write_reg(chip,
+ (unsigned int)CLKCFG_REG_OFFSET,
+ CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV |
+ CLKCFG_PLL2VCO | CLKCFG_UARTCLKSEL,
+ CLKCFG_UART_MASK);
+
+ /* set the prefech value */
+ iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+ /* set the interrupt delay value */
+ iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+ } else if (id->driver_data == 2) {
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+ if (retval)
+ goto err_sysfs_create;
+ /* set the prefech value
+ * Device2(USB OHCI #1/ USB EHCI #1/ USB Device):a
+ * Device4(SDIO #0,1,2):f
+ * Device6(SATA 2):f
+ * Device8(USB OHCI #0/ USB EHCI #0):a
+ */
+ iowrite32(0x000affa0, chip->pch_phub_base_address + 0x14);
+ }
+ pci_set_drvdata(pdev, chip);
return 0;
exit_bin_attr:
@@ -687,9 +731,11 @@ static int pch_phub_resume(struct pci_dev *pdev)
#endif /* CONFIG_PM */
static struct pci_device_id pch_phub_pcidev_id[] = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)},
- {0,}
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH1_PHUB), 1, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, },
+ { }
};
+MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
static struct pci_driver pch_phub_driver = {
.name = "pch_phub",
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
index 7c4c306dfa8a..0003a1d56f7f 100644
--- a/drivers/misc/sgi-gru/Makefile
+++ b/drivers/misc/sgi-gru/Makefile
@@ -1,6 +1,4 @@
-ifdef CONFIG_SGI_GRU_DEBUG
- EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_SGI_GRU_DEBUG) := -DDEBUG
obj-$(CONFIG_SGI_GRU) := gru.o
gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o gruhandles.o grukdump.o
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 000000000000..ec3b8c911833
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,908 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand<pratyush.anand@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pci_regs.h>
+#include <linux/configfs.h>
+#include <mach/pcie.h>
+#include <mach/misc_regs.h>
+
+#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT 0
+#define INT_TYPE_INTX 1
+#define INT_TYPE_MSI 2
+struct spear_pcie_gadget_config {
+ void __iomem *base;
+ void __iomem *va_app_base;
+ void __iomem *va_dbi_base;
+ char int_type[10];
+ ulong requested_msi;
+ ulong configured_msi;
+ ulong bar0_size;
+ ulong bar0_rw_offset;
+ void __iomem *va_bar0_address;
+};
+
+struct pcie_gadget_target {
+ struct configfs_subsystem subsys;
+ struct spear_pcie_gadget_config config;
+};
+
+struct pcie_gadget_target_attr {
+ struct configfs_attribute attr;
+ ssize_t (*show)(struct spear_pcie_gadget_config *config,
+ char *buf);
+ ssize_t (*store)(struct spear_pcie_gadget_config *config,
+ const char *buf,
+ size_t count);
+};
+
+static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* Enable DBI access */
+ writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* disable DBI access */
+ writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 *val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ *val = readl(va_address);
+
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ if (size == 4)
+ writel(val, va_address);
+ else if (size == 2)
+ writew(val, va_address + (where & 2));
+ else if (size == 1)
+ writeb(val, va_address + (where & 3));
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL 48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap, int *ttl)
+{
+ u32 id;
+
+ while ((*ttl)--) {
+ spear_dbi_read_reg(config, pos, 1, &pos);
+ if (pos < 0x40)
+ break;
+ pos &= ~3;
+ spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+ pos += PCI_CAP_LIST_NEXT;
+ }
+ return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+ u8 hdr_type)
+{
+ u32 status;
+
+ spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ switch (hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ case PCI_HEADER_TYPE_BRIDGE:
+ return PCI_CAPABILITY_LIST;
+ case PCI_HEADER_TYPE_CARDBUS:
+ return PCI_CB_CAPABILITY_LIST;
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it. Possible values for @cap:
+ *
+ * %PCI_CAP_ID_PM Power Management
+ * %PCI_CAP_ID_AGP Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD Vital Product Data
+ * %PCI_CAP_ID_SLOTID Slot Identification
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+ int cap)
+{
+ u32 pos;
+ u32 hdr_type;
+
+ spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+ pos = pci_find_own_cap_start(config, hdr_type);
+ if (pos)
+ pos = pci_find_own_next_cap(config, pos, cap);
+
+ return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+ return 0;
+}
+
+/*
+ * configfs interfaces show/store functions
+ */
+static ssize_t pcie_gadget_show_link(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+ return sprintf(buf, "UP");
+ else
+ return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (sysfs_streq(buf, "UP"))
+ writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else if (sysfs_streq(buf, "DOWN"))
+ writel(readl(&app_reg->app_ctrl_0)
+ & ~(1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else
+ return -EINVAL;
+ return count;
+}
+
+static ssize_t pcie_gadget_show_int_type(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if (sysfs_streq(buf, "INTA"))
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+ else if (sysfs_streq(buf, "MSI")) {
+ vector = config->requested_msi;
+ vec = 0;
+ while (vector > 1) {
+ vector /= 2;
+ vec++;
+ }
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QMASK;
+ flags |= vec << 1;
+ spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+ } else
+ return -EINVAL;
+
+ strcpy(config->int_type, buf);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+ != (1 << CFG_MSI_EN_ID))
+ vector = 0;
+ else {
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QSIZE;
+ vec = flags >> 4;
+ vector = 1;
+ while (vec--)
+ vector *= 2;
+ }
+ config->configured_msi = vector;
+
+ return sprintf(buf, "%lu", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ if (strict_strtoul(buf, 0, &config->requested_msi))
+ return -EINVAL;
+ if (config->requested_msi > 32)
+ config->requested_msi = 32;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_inta(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong en;
+
+ if (strict_strtoul(buf, 0, &en))
+ return -EINVAL;
+
+ if (en)
+ writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+ else
+ writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_send_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong vector;
+ u32 ven_msi;
+
+ if (strict_strtoul(buf, 0, &vector))
+ return -EINVAL;
+
+ if (!config->configured_msi)
+ return -EINVAL;
+
+ if (vector >= config->configured_msi)
+ return -EINVAL;
+
+ ven_msi = readl(&app_reg->ven_msi_1);
+ ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+ ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+ ven_msi &= ~VEN_MSI_TC_MASK;
+ ven_msi |= 0 << VEN_MSI_TC_ID;
+ ven_msi &= ~VEN_MSI_VECTOR_MASK;
+ ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+ /* generating interrupt for msi vector */
+ ven_msi |= VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+ udelay(1);
+ ven_msi &= ~VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_device_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong size;
+ u32 pos, pos1;
+ u32 no_of_bit = 0;
+
+ if (strict_strtoul(buf, 0, &size))
+ return -EINVAL;
+ /* min bar size is 256 */
+ if (size <= 0x100)
+ size = 0x100;
+ /* max bar size is 1MB*/
+ else if (size >= 0x100000)
+ size = 0x100000;
+ else {
+ pos = 0;
+ pos1 = 0;
+ while (pos < 21) {
+ pos = find_next_bit((ulong *)&size, 21, pos);
+ if (pos != 21)
+ pos1 = pos + 1;
+ pos++;
+ no_of_bit++;
+ }
+ if (no_of_bit == 2)
+ pos1--;
+
+ size = 1 << pos1;
+ }
+ config->bar0_size = size;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+ return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong address;
+
+ if (strict_strtoul(buf, 0, &address))
+ return -EINVAL;
+
+ address &= ~(config->bar0_size - 1);
+ if (config->va_bar0_address)
+ iounmap(config->va_bar0_address);
+ config->va_bar0_address = ioremap(address, config->bar0_size);
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(address, &app_reg->pim0_mem_addr_start);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong offset;
+
+ if (strict_strtoul(buf, 0, &offset))
+ return -EINVAL;
+
+ if (offset % 4)
+ return -EINVAL;
+
+ config->bar0_rw_offset = offset;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ ulong data;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return sprintf(buf, "%lx", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong data;
+
+ if (strict_strtoul(buf, 0, &data))
+ return -EINVAL;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return count;
+}
+
+/*
+ * Attribute definitions.
+ */
+
+#define PCIE_GADGET_TARGET_ATTR_RO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
+
+#define PCIE_GADGET_TARGET_ATTR_WO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
+
+#define PCIE_GADGET_TARGET_ATTR_RW(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
+ pcie_gadget_store_##_name)
+PCIE_GADGET_TARGET_ATTR_RW(link);
+PCIE_GADGET_TARGET_ATTR_RW(int_type);
+PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
+PCIE_GADGET_TARGET_ATTR_WO(inta);
+PCIE_GADGET_TARGET_ATTR_WO(send_msi);
+PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
+PCIE_GADGET_TARGET_ATTR_RW(device_id);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
+
+static struct configfs_attribute *pcie_gadget_target_attrs[] = {
+ &pcie_gadget_target_link.attr,
+ &pcie_gadget_target_int_type.attr,
+ &pcie_gadget_target_no_of_msi.attr,
+ &pcie_gadget_target_inta.attr,
+ &pcie_gadget_target_send_msi.attr,
+ &pcie_gadget_target_vendor_id.attr,
+ &pcie_gadget_target_device_id.attr,
+ &pcie_gadget_target_bar0_size.attr,
+ &pcie_gadget_target_bar0_address.attr,
+ &pcie_gadget_target_bar0_rw_offset.attr,
+ &pcie_gadget_target_bar0_data.attr,
+ NULL,
+};
+
+static struct pcie_gadget_target *to_target(struct config_item *item)
+{
+ return item ?
+ container_of(to_configfs_subsystem(to_config_group(item)),
+ struct pcie_gadget_target, subsys) : NULL;
+}
+
+/*
+ * Item operations and type for pcie_gadget_target.
+ */
+
+static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
+ struct configfs_attribute *attr,
+ char *buf)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->show)
+ ret = t_attr->show(&target->config, buf);
+ return ret;
+}
+
+static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
+ struct configfs_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->store)
+ ret = t_attr->store(&target->config, buf, count);
+ return ret;
+}
+
+static struct configfs_item_operations pcie_gadget_target_item_ops = {
+ .show_attribute = pcie_gadget_target_attr_show,
+ .store_attribute = pcie_gadget_target_attr_store,
+};
+
+static struct config_item_type pcie_gadget_target_type = {
+ .ct_attrs = pcie_gadget_target_attrs,
+ .ct_item_ops = &pcie_gadget_target_item_ops,
+ .ct_owner = THIS_MODULE,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ /*setup registers for outbound translation */
+
+ writel(config->base, &app_reg->in0_mem_addr_start);
+ writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+ &app_reg->in0_mem_addr_limit);
+ writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+ &app_reg->in1_mem_addr_limit);
+ writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+ writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+ &app_reg->in_io_addr_limit);
+ writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+ writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+ &app_reg->in_cfg0_addr_limit);
+ writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+ writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+ &app_reg->in_cfg1_addr_limit);
+ writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+ writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+ &app_reg->in_msg_addr_limit);
+
+ writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+ writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+ /*setup registers for inbound translation */
+
+ /* Keep AORAM mapped at BAR0 as default */
+ config->bar0_size = INBOUND_ADDR_MASK + 1;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+ spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+ config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
+ config->bar0_size);
+
+ writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+ writel(0, &app_reg->pim1_mem_addr_start);
+ writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_rom_addr_start);
+
+ writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+ | ((u32)1 << REG_TRANSLATION_ENABLE),
+ &app_reg->app_ctrl_0);
+ /* disable all rx interrupts */
+ writel(0, &app_reg->int_mask);
+
+ /* Select INTA as default*/
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ unsigned int status = 0;
+ int irq;
+ struct clk *clk;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ struct config_item *cg_item;
+ struct configfs_subsystem *subsys;
+
+ /* get resource for application registers*/
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res0) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ return -EBUSY;
+ }
+ if (!request_mem_region(res0->start, resource_size(res0),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ return -EBUSY;
+ }
+ /* get resource for dbi registers*/
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res1) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ goto err_rel_res0;
+ }
+ if (!request_mem_region(res1->start, resource_size(res1),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ goto err_rel_res0;
+ }
+
+ target = kzalloc(sizeof(*target), GFP_KERNEL);
+ if (!target) {
+ dev_err(&pdev->dev, "out of memory\n");
+ status = -ENOMEM;
+ goto err_rel_res;
+ }
+
+ cg_item = &target->subsys.su_group.cg_item;
+ sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
+ cg_item->ci_type = &pcie_gadget_target_type;
+ config = &target->config;
+ config->va_app_base = (void __iomem *)ioremap(res0->start,
+ resource_size(res0));
+ if (!config->va_app_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ config->base = (void __iomem *)res1->start;
+
+ config->va_dbi_base = (void __iomem *)ioremap(res1->start,
+ resource_size(res1));
+ if (!config->va_dbi_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_iounmap_app;
+ }
+
+ dev_set_drvdata(&pdev->dev, target);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no update irq?\n");
+ status = irq;
+ goto err_iounmap;
+ }
+
+ status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+ if (status) {
+ dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+ claimed\n", irq);
+ goto err_iounmap;
+ }
+
+ /* Register configfs hooks */
+ subsys = &target->subsys;
+ config_group_init(&subsys->su_group);
+ mutex_init(&subsys->su_mutex);
+ status = configfs_register_subsystem(subsys);
+ if (status)
+ goto err_irq;
+
+ /*
+ * init basic pcie application registers
+ * do not enable clock if it is PCIE0.Ideally , all controller should
+ * have been independent from others with respect to clock. But PCIE1
+ * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
+ */
+ if (pdev->id == 1) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie1", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ } else if (pdev->id == 2) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie2", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ }
+ spear13xx_pcie_device_init(config);
+
+ return 0;
+err_irq:
+ free_irq(irq, NULL);
+err_iounmap:
+ iounmap(config->va_dbi_base);
+err_iounmap_app:
+ iounmap(config->va_app_base);
+err_kzalloc:
+ kfree(config);
+err_rel_res:
+ release_mem_region(res1->start, resource_size(res1));
+err_rel_res0:
+ release_mem_region(res0->start, resource_size(res0));
+ return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ int irq;
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irq = platform_get_irq(pdev, 0);
+ target = dev_get_drvdata(&pdev->dev);
+ config = &target->config;
+
+ free_irq(irq, NULL);
+ iounmap(config->va_dbi_base);
+ iounmap(config->va_app_base);
+ release_mem_region(res1->start, resource_size(res1));
+ release_mem_region(res0->start, resource_size(res0));
+ configfs_unregister_subsystem(&target->subsys);
+ kfree(target);
+
+ return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+ .probe = spear_pcie_gadget_probe,
+ .remove = spear_pcie_gadget_remove,
+ .shutdown = spear_pcie_gadget_shutdown,
+ .driver = {
+ .name = "pcie-gadget-spear",
+ .bus = &platform_bus_type
+ },
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+ return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+ platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f9aad06d1ae5..486117f72c9f 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -25,10 +25,9 @@
#include <linux/init.h>
#include <linux/tty.h>
-/* understand BT, FM and GPS for now */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
+#include <linux/seq_file.h>
+#include <linux/skbuff.h>
+
#include <linux/ti_wilink_st.h>
/* function pointer pointing to either,
@@ -38,21 +37,38 @@
void (*st_recv) (void*, const unsigned char*, long);
/********************************************************************/
-#if 0
-/* internal misc functions */
-bool is_protocol_list_empty(void)
+static void add_channel_to_table(struct st_data_s *st_gdata,
+ struct st_proto_s *new_proto)
{
- unsigned char i = 0;
- pr_debug(" %s ", __func__);
- for (i = 0; i < ST_MAX; i++) {
- if (st_gdata->list[i] != NULL)
- return ST_NOTEMPTY;
- /* not empty */
+ pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
+ /* list now has the channel id as index itself */
+ st_gdata->list[new_proto->chnl_id] = new_proto;
+}
+
+static void remove_channel_from_table(struct st_data_s *st_gdata,
+ struct st_proto_s *proto)
+{
+ pr_info("%s: id %d\n", __func__, proto->chnl_id);
+ st_gdata->list[proto->chnl_id] = NULL;
+}
+
+/*
+ * called from KIM during firmware download.
+ *
+ * This is a wrapper function to tty->ops->write_room.
+ * It returns number of free space available in
+ * uart tx buffer.
+ */
+int st_get_uart_wr_room(struct st_data_s *st_gdata)
+{
+ struct tty_struct *tty;
+ if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
+ pr_err("tty unavailable to perform write");
+ return -1;
}
- /* list empty */
- return ST_EMPTY;
+ tty = st_gdata->tty;
+ return tty->ops->write_room(tty);
}
-#endif
/* can be called in from
* -- KIM (during fw download)
@@ -67,7 +83,7 @@ int st_int_write(struct st_data_s *st_gdata,
struct tty_struct *tty;
if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
pr_err("tty unavailable to perform write");
- return -1;
+ return -EINVAL;
}
tty = st_gdata->tty;
#ifdef VERBOSE
@@ -82,15 +98,15 @@ int st_int_write(struct st_data_s *st_gdata,
* push the skb received to relevant
* protocol stacks
*/
-void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
+void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
{
- pr_info(" %s(prot:%d) ", __func__, protoid);
+ pr_debug(" %s(prot:%d) ", __func__, chnl_id);
if (unlikely
(st_gdata == NULL || st_gdata->rx_skb == NULL
- || st_gdata->list[protoid] == NULL)) {
- pr_err("protocol %d not registered, no data to send?",
- protoid);
+ || st_gdata->list[chnl_id] == NULL)) {
+ pr_err("chnl_id %d not registered, no data to send?",
+ chnl_id);
kfree_skb(st_gdata->rx_skb);
return;
}
@@ -99,17 +115,17 @@ void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
* - should be just skb_queue_tail for the
* protocol stack driver
*/
- if (likely(st_gdata->list[protoid]->recv != NULL)) {
+ if (likely(st_gdata->list[chnl_id]->recv != NULL)) {
if (unlikely
- (st_gdata->list[protoid]->recv
- (st_gdata->list[protoid]->priv_data, st_gdata->rx_skb)
+ (st_gdata->list[chnl_id]->recv
+ (st_gdata->list[chnl_id]->priv_data, st_gdata->rx_skb)
!= 0)) {
- pr_err(" proto stack %d's ->recv failed", protoid);
+ pr_err(" proto stack %d's ->recv failed", chnl_id);
kfree_skb(st_gdata->rx_skb);
return;
}
} else {
- pr_err(" proto stack %d's ->recv null", protoid);
+ pr_err(" proto stack %d's ->recv null", chnl_id);
kfree_skb(st_gdata->rx_skb);
}
return;
@@ -124,16 +140,22 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
{
unsigned char i = 0;
pr_info(" %s ", __func__);
- for (i = 0; i < ST_MAX; i++) {
+ for (i = 0; i < ST_MAX_CHANNELS; i++) {
if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
- st_gdata->list[i]->reg_complete_cb != NULL))
+ st_gdata->list[i]->reg_complete_cb != NULL)) {
st_gdata->list[i]->reg_complete_cb
(st_gdata->list[i]->priv_data, err);
+ pr_info("protocol %d's cb sent %d\n", i, err);
+ if (err) { /* cleanup registered protocol */
+ st_gdata->protos_registered--;
+ st_gdata->list[i] = NULL;
+ }
+ }
}
}
static inline int st_check_data_len(struct st_data_s *st_gdata,
- int protoid, int len)
+ unsigned char chnl_id, int len)
{
int room = skb_tailroom(st_gdata->rx_skb);
@@ -144,7 +166,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
* has zero length payload. So, ask ST CORE to
* forward the packet to protocol driver (BT/FM/GPS)
*/
- st_send_frame(protoid, st_gdata);
+ st_send_frame(chnl_id, st_gdata);
} else if (len > room) {
/* Received packet's payload length is larger.
@@ -157,7 +179,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
/* Packet header has non-zero payload length and
* we have enough space in created skb. Lets read
* payload data */
- st_gdata->rx_state = ST_BT_W4_DATA;
+ st_gdata->rx_state = ST_W4_DATA;
st_gdata->rx_count = len;
return len;
}
@@ -167,6 +189,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
st_gdata->rx_state = ST_W4_PACKET_TYPE;
st_gdata->rx_skb = NULL;
st_gdata->rx_count = 0;
+ st_gdata->rx_chnl = 0;
return 0;
}
@@ -208,14 +231,12 @@ void st_int_recv(void *disc_data,
const unsigned char *data, long count)
{
char *ptr;
- struct hci_event_hdr *eh;
- struct hci_acl_hdr *ah;
- struct hci_sco_hdr *sh;
- struct fm_event_hdr *fm;
- struct gps_event_hdr *gps;
- int len = 0, type = 0, dlen = 0;
- static enum proto_type protoid = ST_MAX;
+ struct st_proto_s *proto;
+ unsigned short payload_len = 0;
+ int len = 0, type = 0;
+ unsigned char *plen;
struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
+ unsigned long flags;
ptr = (char *)data;
/* tty_receive sent null ? */
@@ -224,10 +245,11 @@ void st_int_recv(void *disc_data,
return;
}
- pr_info("count %ld rx_state %ld"
+ pr_debug("count %ld rx_state %ld"
"rx_count %ld", count, st_gdata->rx_state,
st_gdata->rx_count);
+ spin_lock_irqsave(&st_gdata->lock, flags);
/* Decode received bytes here */
while (count) {
if (st_gdata->rx_count) {
@@ -242,64 +264,36 @@ void st_int_recv(void *disc_data,
/* Check ST RX state machine , where are we? */
switch (st_gdata->rx_state) {
-
- /* Waiting for complete packet ? */
- case ST_BT_W4_DATA:
+ /* Waiting for complete packet ? */
+ case ST_W4_DATA:
pr_debug("Complete pkt received");
-
/* Ask ST CORE to forward
* the packet to protocol driver */
- st_send_frame(protoid, st_gdata);
+ st_send_frame(st_gdata->rx_chnl, st_gdata);
st_gdata->rx_state = ST_W4_PACKET_TYPE;
st_gdata->rx_skb = NULL;
- protoid = ST_MAX; /* is this required ? */
continue;
-
- /* Waiting for Bluetooth event header ? */
- case ST_BT_W4_EVENT_HDR:
- eh = (struct hci_event_hdr *)st_gdata->rx_skb->
- data;
-
- pr_debug("Event header: evt 0x%2.2x"
- "plen %d", eh->evt, eh->plen);
-
- st_check_data_len(st_gdata, protoid, eh->plen);
- continue;
-
- /* Waiting for Bluetooth acl header ? */
- case ST_BT_W4_ACL_HDR:
- ah = (struct hci_acl_hdr *)st_gdata->rx_skb->
- data;
- dlen = __le16_to_cpu(ah->dlen);
-
- pr_info("ACL header: dlen %d", dlen);
-
- st_check_data_len(st_gdata, protoid, dlen);
- continue;
-
- /* Waiting for Bluetooth sco header ? */
- case ST_BT_W4_SCO_HDR:
- sh = (struct hci_sco_hdr *)st_gdata->rx_skb->
- data;
-
- pr_info("SCO header: dlen %d", sh->dlen);
-
- st_check_data_len(st_gdata, protoid, sh->dlen);
- continue;
- case ST_FM_W4_EVENT_HDR:
- fm = (struct fm_event_hdr *)st_gdata->rx_skb->
- data;
- pr_info("FM Header: ");
- st_check_data_len(st_gdata, ST_FM, fm->plen);
- continue;
- /* TODO : Add GPS packet machine logic here */
- case ST_GPS_W4_EVENT_HDR:
- /* [0x09 pkt hdr][R/W byte][2 byte len] */
- gps = (struct gps_event_hdr *)st_gdata->rx_skb->
- data;
- pr_info("GPS Header: ");
- st_check_data_len(st_gdata, ST_GPS, gps->plen);
+ /* parse the header to know details */
+ case ST_W4_HEADER:
+ proto = st_gdata->list[st_gdata->rx_chnl];
+ plen =
+ &st_gdata->rx_skb->data
+ [proto->offset_len_in_hdr];
+ pr_debug("plen pointing to %x\n", *plen);
+ if (proto->len_size == 1)/* 1 byte len field */
+ payload_len = *(unsigned char *)plen;
+ else if (proto->len_size == 2)
+ payload_len =
+ __le16_to_cpu(*(unsigned short *)plen);
+ else
+ pr_info("%s: invalid length "
+ "for id %d\n",
+ __func__, proto->chnl_id);
+ st_check_data_len(st_gdata, proto->chnl_id,
+ payload_len);
+ pr_debug("off %d, pay len %d\n",
+ proto->offset_len_in_hdr, payload_len);
continue;
} /* end of switch rx_state */
}
@@ -308,123 +302,56 @@ void st_int_recv(void *disc_data,
/* Check first byte of packet and identify module
* owner (BT/FM/GPS) */
switch (*ptr) {
-
- /* Bluetooth event packet? */
- case HCI_EVENT_PKT:
- pr_info("Event packet");
- st_gdata->rx_state = ST_BT_W4_EVENT_HDR;
- st_gdata->rx_count = HCI_EVENT_HDR_SIZE;
- type = HCI_EVENT_PKT;
- protoid = ST_BT;
- break;
-
- /* Bluetooth acl packet? */
- case HCI_ACLDATA_PKT:
- pr_info("ACL packet");
- st_gdata->rx_state = ST_BT_W4_ACL_HDR;
- st_gdata->rx_count = HCI_ACL_HDR_SIZE;
- type = HCI_ACLDATA_PKT;
- protoid = ST_BT;
- break;
-
- /* Bluetooth sco packet? */
- case HCI_SCODATA_PKT:
- pr_info("SCO packet");
- st_gdata->rx_state = ST_BT_W4_SCO_HDR;
- st_gdata->rx_count = HCI_SCO_HDR_SIZE;
- type = HCI_SCODATA_PKT;
- protoid = ST_BT;
- break;
-
- /* Channel 8(FM) packet? */
- case ST_FM_CH8_PKT:
- pr_info("FM CH8 packet");
- type = ST_FM_CH8_PKT;
- st_gdata->rx_state = ST_FM_W4_EVENT_HDR;
- st_gdata->rx_count = FM_EVENT_HDR_SIZE;
- protoid = ST_FM;
- break;
-
- /* Channel 9(GPS) packet? */
- case 0x9: /*ST_LL_GPS_CH9_PKT */
- pr_info("GPS CH9 packet");
- type = 0x9; /* ST_LL_GPS_CH9_PKT; */
- protoid = ST_GPS;
- st_gdata->rx_state = ST_GPS_W4_EVENT_HDR;
- st_gdata->rx_count = 3; /* GPS_EVENT_HDR_SIZE -1*/
- break;
case LL_SLEEP_IND:
case LL_SLEEP_ACK:
case LL_WAKE_UP_IND:
- pr_info("PM packet");
+ pr_debug("PM packet");
/* this takes appropriate action based on
* sleep state received --
*/
st_ll_sleep_state(st_gdata, *ptr);
+ /* if WAKEUP_IND collides copy from waitq to txq
+ * and assume chip awake
+ */
+ spin_unlock_irqrestore(&st_gdata->lock, flags);
+ if (st_ll_getstate(st_gdata) == ST_LL_AWAKE)
+ st_wakeup_ack(st_gdata, LL_WAKE_UP_ACK);
+ spin_lock_irqsave(&st_gdata->lock, flags);
+
ptr++;
count--;
continue;
case LL_WAKE_UP_ACK:
- pr_info("PM packet");
+ pr_debug("PM packet");
+
+ spin_unlock_irqrestore(&st_gdata->lock, flags);
/* wake up ack received */
st_wakeup_ack(st_gdata, *ptr);
+ spin_lock_irqsave(&st_gdata->lock, flags);
+
ptr++;
count--;
continue;
/* Unknow packet? */
default:
- pr_err("Unknown packet type %2.2x", (__u8) *ptr);
- ptr++;
- count--;
- continue;
+ type = *ptr;
+ st_gdata->rx_skb = alloc_skb(
+ st_gdata->list[type]->max_frame_size,
+ GFP_ATOMIC);
+ skb_reserve(st_gdata->rx_skb,
+ st_gdata->list[type]->reserve);
+ /* next 2 required for BT only */
+ st_gdata->rx_skb->cb[0] = type; /*pkt_type*/
+ st_gdata->rx_skb->cb[1] = 0; /*incoming*/
+ st_gdata->rx_chnl = *ptr;
+ st_gdata->rx_state = ST_W4_HEADER;
+ st_gdata->rx_count = st_gdata->list[type]->hdr_len;
+ pr_debug("rx_count %ld\n", st_gdata->rx_count);
};
ptr++;
count--;
-
- switch (protoid) {
- case ST_BT:
- /* Allocate new packet to hold received data */
- st_gdata->rx_skb =
- bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
- if (!st_gdata->rx_skb) {
- pr_err("Can't allocate mem for new packet");
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_count = 0;
- return;
- }
- bt_cb(st_gdata->rx_skb)->pkt_type = type;
- break;
- case ST_FM: /* for FM */
- st_gdata->rx_skb =
- alloc_skb(FM_MAX_FRAME_SIZE, GFP_ATOMIC);
- if (!st_gdata->rx_skb) {
- pr_err("Can't allocate mem for new packet");
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_count = 0;
- return;
- }
- /* place holder 0x08 */
- skb_reserve(st_gdata->rx_skb, 1);
- st_gdata->rx_skb->cb[0] = ST_FM_CH8_PKT;
- break;
- case ST_GPS:
- /* for GPS */
- st_gdata->rx_skb =
- alloc_skb(100 /*GPS_MAX_FRAME_SIZE */ , GFP_ATOMIC);
- if (!st_gdata->rx_skb) {
- pr_err("Can't allocate mem for new packet");
- st_gdata->rx_state = ST_W4_PACKET_TYPE;
- st_gdata->rx_count = 0;
- return;
- }
- /* place holder 0x09 */
- skb_reserve(st_gdata->rx_skb, 1);
- st_gdata->rx_skb->cb[0] = 0x09; /*ST_GPS_CH9_PKT; */
- break;
- case ST_MAX:
- break;
- }
}
+ spin_unlock_irqrestore(&st_gdata->lock, flags);
pr_debug("done %s", __func__);
return;
}
@@ -466,7 +393,7 @@ void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
switch (st_ll_getstate(st_gdata)) {
case ST_LL_AWAKE:
- pr_info("ST LL is AWAKE, sending normally");
+ pr_debug("ST LL is AWAKE, sending normally");
skb_queue_tail(&st_gdata->txq, skb);
break;
case ST_LL_ASLEEP_TO_AWAKE:
@@ -506,7 +433,7 @@ void st_tx_wakeup(struct st_data_s *st_data)
pr_debug("%s", __func__);
/* check for sending & set flag sending here */
if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
- pr_info("ST already sending");
+ pr_debug("ST already sending");
/* keep sending */
set_bit(ST_TX_WAKEUP, &st_data->tx_state);
return;
@@ -548,9 +475,9 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
{
seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
st_gdata->protos_registered,
- st_gdata->list[ST_BT] != NULL ? 'R' : 'U',
- st_gdata->list[ST_FM] != NULL ? 'R' : 'U',
- st_gdata->list[ST_GPS] != NULL ? 'R' : 'U');
+ st_gdata->list[0x04] != NULL ? 'R' : 'U',
+ st_gdata->list[0x08] != NULL ? 'R' : 'U',
+ st_gdata->list[0x09] != NULL ? 'R' : 'U');
}
/********************************************************************/
@@ -565,20 +492,20 @@ long st_register(struct st_proto_s *new_proto)
unsigned long flags = 0;
st_kim_ref(&st_gdata, 0);
- pr_info("%s(%d) ", __func__, new_proto->type);
+ pr_info("%s(%d) ", __func__, new_proto->chnl_id);
if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
|| new_proto->reg_complete_cb == NULL) {
pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
- return -1;
+ return -EINVAL;
}
- if (new_proto->type < ST_BT || new_proto->type >= ST_MAX) {
- pr_err("protocol %d not supported", new_proto->type);
+ if (new_proto->chnl_id >= ST_MAX_CHANNELS) {
+ pr_err("chnl_id %d not supported", new_proto->chnl_id);
return -EPROTONOSUPPORT;
}
- if (st_gdata->list[new_proto->type] != NULL) {
- pr_err("protocol %d already registered", new_proto->type);
+ if (st_gdata->list[new_proto->chnl_id] != NULL) {
+ pr_err("chnl_id %d already registered", new_proto->chnl_id);
return -EALREADY;
}
@@ -586,11 +513,10 @@ long st_register(struct st_proto_s *new_proto)
spin_lock_irqsave(&st_gdata->lock, flags);
if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
- pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->type);
+ pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->chnl_id);
/* fw download in progress */
- st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
- st_gdata->list[new_proto->type] = new_proto;
+ add_channel_to_table(st_gdata, new_proto);
st_gdata->protos_registered++;
new_proto->write = st_write;
@@ -598,7 +524,7 @@ long st_register(struct st_proto_s *new_proto)
spin_unlock_irqrestore(&st_gdata->lock, flags);
return -EINPROGRESS;
} else if (st_gdata->protos_registered == ST_EMPTY) {
- pr_info(" protocol list empty :%d ", new_proto->type);
+ pr_info(" chnl_id list empty :%d ", new_proto->chnl_id);
set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
st_recv = st_kim_recv;
@@ -616,16 +542,11 @@ long st_register(struct st_proto_s *new_proto)
if ((st_gdata->protos_registered != ST_EMPTY) &&
(test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
pr_err(" KIM failure complete callback ");
- st_reg_complete(st_gdata, -1);
+ st_reg_complete(st_gdata, err);
}
-
- return -1;
+ return -EINVAL;
}
- /* the protocol might require other gpios to be toggled
- */
- st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-
clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
st_recv = st_int_recv;
@@ -642,14 +563,14 @@ long st_register(struct st_proto_s *new_proto)
/* check for already registered once more,
* since the above check is old
*/
- if (st_gdata->list[new_proto->type] != NULL) {
+ if (st_gdata->list[new_proto->chnl_id] != NULL) {
pr_err(" proto %d already registered ",
- new_proto->type);
+ new_proto->chnl_id);
return -EALREADY;
}
spin_lock_irqsave(&st_gdata->lock, flags);
- st_gdata->list[new_proto->type] = new_proto;
+ add_channel_to_table(st_gdata, new_proto);
st_gdata->protos_registered++;
new_proto->write = st_write;
spin_unlock_irqrestore(&st_gdata->lock, flags);
@@ -657,22 +578,7 @@ long st_register(struct st_proto_s *new_proto)
}
/* if fw is already downloaded & new stack registers protocol */
else {
- switch (new_proto->type) {
- case ST_BT:
- /* do nothing */
- break;
- case ST_FM:
- case ST_GPS:
- st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
- break;
- case ST_MAX:
- default:
- pr_err("%d protocol not supported",
- new_proto->type);
- spin_unlock_irqrestore(&st_gdata->lock, flags);
- return -EPROTONOSUPPORT;
- }
- st_gdata->list[new_proto->type] = new_proto;
+ add_channel_to_table(st_gdata, new_proto);
st_gdata->protos_registered++;
new_proto->write = st_write;
@@ -680,48 +586,42 @@ long st_register(struct st_proto_s *new_proto)
spin_unlock_irqrestore(&st_gdata->lock, flags);
return err;
}
- pr_debug("done %s(%d) ", __func__, new_proto->type);
+ pr_debug("done %s(%d) ", __func__, new_proto->chnl_id);
}
EXPORT_SYMBOL_GPL(st_register);
/* to unregister a protocol -
* to be called from protocol stack driver
*/
-long st_unregister(enum proto_type type)
+long st_unregister(struct st_proto_s *proto)
{
long err = 0;
unsigned long flags = 0;
struct st_data_s *st_gdata;
- pr_debug("%s: %d ", __func__, type);
+ pr_debug("%s: %d ", __func__, proto->chnl_id);
st_kim_ref(&st_gdata, 0);
- if (type < ST_BT || type >= ST_MAX) {
- pr_err(" protocol %d not supported", type);
+ if (proto->chnl_id >= ST_MAX_CHANNELS) {
+ pr_err(" chnl_id %d not supported", proto->chnl_id);
return -EPROTONOSUPPORT;
}
spin_lock_irqsave(&st_gdata->lock, flags);
- if (st_gdata->list[type] == NULL) {
- pr_err(" protocol %d not registered", type);
+ if (st_gdata->list[proto->chnl_id] == NULL) {
+ pr_err(" chnl_id %d not registered", proto->chnl_id);
spin_unlock_irqrestore(&st_gdata->lock, flags);
return -EPROTONOSUPPORT;
}
st_gdata->protos_registered--;
- st_gdata->list[type] = NULL;
-
- /* kim ignores BT in the below function
- * and handles the rest, BT is toggled
- * only in kim_start and kim_stop
- */
- st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
+ remove_channel_from_table(st_gdata, proto);
spin_unlock_irqrestore(&st_gdata->lock, flags);
if ((st_gdata->protos_registered == ST_EMPTY) &&
(!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
- pr_info(" all protocols unregistered ");
+ pr_info(" all chnl_ids unregistered ");
/* stop traffic on tty */
if (st_gdata->tty) {
@@ -729,7 +629,7 @@ long st_unregister(enum proto_type type)
stop_tty(st_gdata->tty);
}
- /* all protocols now unregistered */
+ /* all chnl_ids now unregistered */
st_kim_stop(st_gdata->kim_data);
/* disable ST LL */
st_ll_disable(st_gdata);
@@ -744,37 +644,15 @@ long st_unregister(enum proto_type type)
long st_write(struct sk_buff *skb)
{
struct st_data_s *st_gdata;
-#ifdef DEBUG
- enum proto_type protoid = ST_MAX;
-#endif
long len;
st_kim_ref(&st_gdata, 0);
if (unlikely(skb == NULL || st_gdata == NULL
|| st_gdata->tty == NULL)) {
pr_err("data/tty unavailable to perform write");
- return -1;
+ return -EINVAL;
}
-#ifdef DEBUG /* open-up skb to read the 1st byte */
- switch (skb->data[0]) {
- case HCI_COMMAND_PKT:
- case HCI_ACLDATA_PKT:
- case HCI_SCODATA_PKT:
- protoid = ST_BT;
- break;
- case ST_FM_CH8_PKT:
- protoid = ST_FM;
- break;
- case 0x09:
- protoid = ST_GPS;
- break;
- }
- if (unlikely(st_gdata->list[protoid] == NULL)) {
- pr_err(" protocol %d not registered, and writing? ",
- protoid);
- return -1;
- }
-#endif
+
pr_debug("%d to be written", skb->len);
len = skb->len;
@@ -824,7 +702,7 @@ static int st_tty_open(struct tty_struct *tty)
static void st_tty_close(struct tty_struct *tty)
{
- unsigned char i = ST_MAX;
+ unsigned char i = ST_MAX_CHANNELS;
unsigned long flags = 0;
struct st_data_s *st_gdata = tty->disc_data;
@@ -835,7 +713,7 @@ static void st_tty_close(struct tty_struct *tty)
* un-installed for some reason - what should be done ?
*/
spin_lock_irqsave(&st_gdata->lock, flags);
- for (i = ST_BT; i < ST_MAX; i++) {
+ for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
if (st_gdata->list[i] != NULL)
pr_err("%d not un-registered", i);
st_gdata->list[i] = NULL;
@@ -869,7 +747,6 @@ static void st_tty_close(struct tty_struct *tty)
static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
char *tty_flags, int count)
{
-
#ifdef VERBOSE
print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
16, 1, data, count, 0);
@@ -960,7 +837,7 @@ int st_core_init(struct st_data_s **core_data)
err = tty_unregister_ldisc(N_TI_WL);
if (err)
pr_err("unable to un-register ldisc");
- return -1;
+ return err;
}
*core_data = st_gdata;
return 0;
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 73b6c8b0e869..9ee4c788aa69 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -30,50 +30,12 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
-#include <linux/rfkill.h>
-
-/* understand BT events for fw response */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
+#include <linux/tty.h>
+#include <linux/skbuff.h>
#include <linux/ti_wilink_st.h>
-static int kim_probe(struct platform_device *pdev);
-static int kim_remove(struct platform_device *pdev);
-
-/* KIM platform device driver structure */
-static struct platform_driver kim_platform_driver = {
- .probe = kim_probe,
- .remove = kim_remove,
- /* TODO: ST driver power management during suspend/resume ?
- */
-#if 0
- .suspend = kim_suspend,
- .resume = kim_resume,
-#endif
- .driver = {
- .name = "kim",
- .owner = THIS_MODULE,
- },
-};
-
-static int kim_toggle_radio(void*, bool);
-static const struct rfkill_ops kim_rfkill_ops = {
- .set_block = kim_toggle_radio,
-};
-
-/* strings to be used for rfkill entries and by
- * ST Core to be used for sysfs debug entry
- */
-#define PROTO_ENTRY(type, name) name
-const unsigned char *protocol_names[] = {
- PROTO_ENTRY(ST_BT, "Bluetooth"),
- PROTO_ENTRY(ST_FM, "FM"),
- PROTO_ENTRY(ST_GPS, "GPS"),
-};
-
#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */
static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
@@ -134,7 +96,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
/* Packet header has non-zero payload length and
* we have enough space in created skb. Lets read
* payload data */
- kim_gdata->rx_state = ST_BT_W4_DATA;
+ kim_gdata->rx_state = ST_W4_DATA;
kim_gdata->rx_count = len;
return len;
}
@@ -158,8 +120,8 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
const unsigned char *data, long count)
{
const unsigned char *ptr;
- struct hci_event_hdr *eh;
int len = 0, type = 0;
+ unsigned char *plen;
pr_debug("%s", __func__);
/* Decode received bytes here */
@@ -183,29 +145,27 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
/* Check ST RX state machine , where are we? */
switch (kim_gdata->rx_state) {
/* Waiting for complete packet ? */
- case ST_BT_W4_DATA:
+ case ST_W4_DATA:
pr_debug("Complete pkt received");
validate_firmware_response(kim_gdata);
kim_gdata->rx_state = ST_W4_PACKET_TYPE;
kim_gdata->rx_skb = NULL;
continue;
/* Waiting for Bluetooth event header ? */
- case ST_BT_W4_EVENT_HDR:
- eh = (struct hci_event_hdr *)kim_gdata->
- rx_skb->data;
- pr_debug("Event header: evt 0x%2.2x"
- "plen %d", eh->evt, eh->plen);
- kim_check_data_len(kim_gdata, eh->plen);
+ case ST_W4_HEADER:
+ plen =
+ (unsigned char *)&kim_gdata->rx_skb->data[1];
+ pr_debug("event hdr: plen 0x%02x\n", *plen);
+ kim_check_data_len(kim_gdata, *plen);
continue;
} /* end of switch */
} /* end of if rx_state */
switch (*ptr) {
/* Bluetooth event packet? */
- case HCI_EVENT_PKT:
- pr_info("Event packet");
- kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
- kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
- type = HCI_EVENT_PKT;
+ case 0x04:
+ kim_gdata->rx_state = ST_W4_HEADER;
+ kim_gdata->rx_count = 2;
+ type = *ptr;
break;
default:
pr_info("unknown packet");
@@ -216,16 +176,18 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
ptr++;
count--;
kim_gdata->rx_skb =
- bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+ alloc_skb(1024+8, GFP_ATOMIC);
if (!kim_gdata->rx_skb) {
pr_err("can't allocate mem for new packet");
kim_gdata->rx_state = ST_W4_PACKET_TYPE;
kim_gdata->rx_count = 0;
return;
}
- bt_cb(kim_gdata->rx_skb)->pkt_type = type;
+ skb_reserve(kim_gdata->rx_skb, 8);
+ kim_gdata->rx_skb->cb[0] = 4;
+ kim_gdata->rx_skb->cb[1] = 0;
+
}
- pr_info("done %s", __func__);
return;
}
@@ -239,13 +201,13 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
INIT_COMPLETION(kim_gdata->kim_rcvd);
if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
pr_err("kim: couldn't write 4 bytes");
- return -1;
+ return -EIO;
}
if (!wait_for_completion_timeout
(&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
pr_err(" waiting for ver info- timed out ");
- return -1;
+ return -ETIMEDOUT;
}
version =
@@ -270,6 +232,26 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
return 0;
}
+void skip_change_remote_baud(unsigned char **ptr, long *len)
+{
+ unsigned char *nxt_action, *cur_action;
+ cur_action = *ptr;
+
+ nxt_action = cur_action + sizeof(struct bts_action) +
+ ((struct bts_action *) cur_action)->size;
+
+ if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
+ pr_err("invalid action after change remote baud command");
+ } else {
+ *ptr = *ptr + sizeof(struct bts_action) +
+ ((struct bts_action *)nxt_action)->size;
+ *len = *len - (sizeof(struct bts_action) +
+ ((struct bts_action *)nxt_action)->size);
+ /* warn user on not commenting these in firmware */
+ pr_warn("skipping the wait event of change remote baud");
+ }
+}
+
/**
* download_firmware -
* internal function which parses through the .bts firmware
@@ -282,6 +264,9 @@ static long download_firmware(struct kim_data_s *kim_gdata)
unsigned char *ptr = NULL;
unsigned char *action_ptr = NULL;
unsigned char bts_scr_name[30] = { 0 }; /* 30 char long bts scr name? */
+ int wr_room_space;
+ int cmd_size;
+ unsigned long timeout;
err = read_local_version(kim_gdata, bts_scr_name);
if (err != 0) {
@@ -295,7 +280,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
(kim_gdata->fw_entry->size == 0))) {
pr_err(" request_firmware failed(errno %ld) for %s", err,
bts_scr_name);
- return -1;
+ return -EINVAL;
}
ptr = (void *)kim_gdata->fw_entry->data;
len = kim_gdata->fw_entry->size;
@@ -318,29 +303,72 @@ static long download_firmware(struct kim_data_s *kim_gdata)
0xFF36)) {
/* ignore remote change
* baud rate HCI VS command */
- pr_err
- (" change remote baud"
+ pr_warn("change remote baud"
" rate command in firmware");
+ skip_change_remote_baud(&ptr, &len);
break;
}
+ /*
+ * Make sure we have enough free space in uart
+ * tx buffer to write current firmware command
+ */
+ cmd_size = ((struct bts_action *)ptr)->size;
+ timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME);
+ do {
+ wr_room_space =
+ st_get_uart_wr_room(kim_gdata->core_data);
+ if (wr_room_space < 0) {
+ pr_err("Unable to get free "
+ "space info from uart tx buffer");
+ release_firmware(kim_gdata->fw_entry);
+ return wr_room_space;
+ }
+ mdelay(1); /* wait 1ms before checking room */
+ } while ((wr_room_space < cmd_size) &&
+ time_before(jiffies, timeout));
+
+ /* Timeout happened ? */
+ if (time_after_eq(jiffies, timeout)) {
+ pr_err("Timeout while waiting for free "
+ "free space in uart tx buffer");
+ release_firmware(kim_gdata->fw_entry);
+ return -ETIMEDOUT;
+ }
- INIT_COMPLETION(kim_gdata->kim_rcvd);
+ /*
+ * Free space found in uart buffer, call st_int_write
+ * to send current firmware command to the uart tx
+ * buffer.
+ */
err = st_int_write(kim_gdata->core_data,
((struct bts_action_send *)action_ptr)->data,
((struct bts_action *)ptr)->size);
if (unlikely(err < 0)) {
release_firmware(kim_gdata->fw_entry);
- return -1;
+ return err;
}
+ /*
+ * Check number of bytes written to the uart tx buffer
+ * and requested command write size
+ */
+ if (err != cmd_size) {
+ pr_err("Number of bytes written to uart "
+ "tx buffer are not matching with "
+ "requested cmd write size");
+ release_firmware(kim_gdata->fw_entry);
+ return -EIO;
+ }
+ break;
+ case ACTION_WAIT_EVENT: /* wait */
if (!wait_for_completion_timeout
- (&kim_gdata->kim_rcvd,
- msecs_to_jiffies(CMD_RESP_TIME))) {
- pr_err
- (" response timeout during fw download ");
+ (&kim_gdata->kim_rcvd,
+ msecs_to_jiffies(CMD_RESP_TIME))) {
+ pr_err("response timeout during fw download ");
/* timed out */
release_firmware(kim_gdata->fw_entry);
- return -1;
+ return -ETIMEDOUT;
}
+ INIT_COMPLETION(kim_gdata->kim_rcvd);
break;
case ACTION_DELAY: /* sleep */
pr_info("sleep command in scr");
@@ -362,50 +390,6 @@ static long download_firmware(struct kim_data_s *kim_gdata)
/**********************************************************************/
/* functions called from ST core */
-/* function to toggle the GPIO
- * needs to know whether the GPIO is active high or active low
- */
-void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
-{
- struct platform_device *kim_pdev;
- struct kim_data_s *kim_gdata;
- pr_info(" %s ", __func__);
-
- kim_pdev = st_get_plat_device(0);
- kim_gdata = dev_get_drvdata(&kim_pdev->dev);
-
- if (kim_gdata->gpios[type] == -1) {
- pr_info(" gpio not requested for protocol %s",
- protocol_names[type]);
- return;
- }
- switch (type) {
- case ST_BT:
- /*Do Nothing */
- break;
-
- case ST_FM:
- if (state == KIM_GPIO_ACTIVE)
- gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_LOW);
- else
- gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_HIGH);
- break;
-
- case ST_GPS:
- if (state == KIM_GPIO_ACTIVE)
- gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_HIGH);
- else
- gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
- break;
-
- case ST_MAX:
- default:
- break;
- }
-
- return;
-}
-
/* called from ST Core, when REG_IN_PROGRESS (registration in progress)
* can be because of
* 1. response to read local version
@@ -416,7 +400,6 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
struct kim_data_s *kim_gdata = st_gdata->kim_data;
- pr_info(" %s ", __func__);
/* copy to local buffer */
if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
/* must be the read_ver_cmd */
@@ -455,35 +438,28 @@ long st_kim_start(void *kim_data)
pr_info(" %s", __func__);
do {
- /* TODO: this is only because rfkill sub-system
- * doesn't send events to user-space if the state
- * isn't changed
- */
- rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
/* Configure BT nShutdown to HIGH state */
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
mdelay(5); /* FIXME: a proper toggle */
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+ gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
mdelay(100);
/* re-initialize the completion */
INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
- /* send signal to UIM */
- err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
- if (err != 0) {
- pr_info(" sending SIGUSR2 to uim failed %ld", err);
- err = -1;
- continue;
- }
-#endif
- /* unblock and send event to UIM via /dev/rfkill */
- rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
+ /* send notification to UIM */
+ kim_gdata->ldisc_install = 1;
+ pr_info("ldisc_install = 1");
+ sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+ NULL, "install");
/* wait for ldisc to be installed */
err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
msecs_to_jiffies(LDISC_TIME));
if (!err) { /* timeout */
pr_err("line disc installation timed out ");
- err = -1;
+ kim_gdata->ldisc_install = 0;
+ pr_info("ldisc_install = 0");
+ sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+ NULL, "install");
+ err = -ETIMEDOUT;
continue;
} else {
/* ldisc installed now */
@@ -491,6 +467,10 @@ long st_kim_start(void *kim_data)
err = download_firmware(kim_gdata);
if (err != 0) {
pr_err("download firmware failed");
+ kim_gdata->ldisc_install = 0;
+ pr_info("ldisc_install = 0");
+ sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+ NULL, "install");
continue;
} else { /* on success don't retry */
break;
@@ -510,31 +490,30 @@ long st_kim_stop(void *kim_data)
struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
- /* send signal to UIM */
- err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
- if (err != 0) {
- pr_err("sending SIGUSR2 to uim failed %ld", err);
- return -1;
- }
-#endif
- /* set BT rfkill to be blocked */
- err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
+
+ /* Flush any pending characters in the driver and discipline. */
+ tty_ldisc_flush(kim_gdata->core_data->tty);
+ tty_driver_flush_buffer(kim_gdata->core_data->tty);
+
+ /* send uninstall notification to UIM */
+ pr_info("ldisc_install = 0");
+ kim_gdata->ldisc_install = 0;
+ sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
/* wait for ldisc to be un-installed */
err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
msecs_to_jiffies(LDISC_TIME));
if (!err) { /* timeout */
pr_err(" timed out waiting for ldisc to be un-installed");
- return -1;
+ return -ETIMEDOUT;
}
/* By default configure BT nShutdown to LOW state */
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
mdelay(1);
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+ gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
mdelay(1);
- gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
return err;
}
@@ -558,33 +537,59 @@ static int show_list(struct seq_file *s, void *unused)
return 0;
}
-/* function called from rfkill subsystem, when someone from
- * user space would write 0/1 on the sysfs entry
- * /sys/class/rfkill/rfkill0,1,3/state
- */
-static int kim_toggle_radio(void *data, bool blocked)
+static ssize_t show_install(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- enum proto_type type = *((enum proto_type *)data);
- pr_debug(" %s: %d ", __func__, type);
-
- switch (type) {
- case ST_BT:
- /* do nothing */
- break;
- case ST_FM:
- case ST_GPS:
- if (blocked)
- st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
- else
- st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
- break;
- case ST_MAX:
- pr_err(" wrong proto type ");
- break;
- }
- return 0;
+ struct kim_data_s *kim_data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", kim_data->ldisc_install);
}
+static ssize_t show_dev_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kim_data_s *kim_data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", kim_data->dev_name);
+}
+
+static ssize_t show_baud_rate(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kim_data_s *kim_data = dev_get_drvdata(dev);
+ return sprintf(buf, "%ld\n", kim_data->baud_rate);
+}
+
+static ssize_t show_flow_cntrl(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kim_data_s *kim_data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", kim_data->flow_cntrl);
+}
+
+/* structures specific for sysfs entries */
+static struct kobj_attribute ldisc_install =
+__ATTR(install, 0444, (void *)show_install, NULL);
+
+static struct kobj_attribute uart_dev_name =
+__ATTR(dev_name, 0444, (void *)show_dev_name, NULL);
+
+static struct kobj_attribute uart_baud_rate =
+__ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL);
+
+static struct kobj_attribute uart_flow_cntrl =
+__ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL);
+
+static struct attribute *uim_attrs[] = {
+ &ldisc_install.attr,
+ &uart_dev_name.attr,
+ &uart_baud_rate.attr,
+ &uart_flow_cntrl.attr,
+ NULL,
+};
+
+static struct attribute_group uim_attr_grp = {
+ .attrs = uim_attrs,
+};
+
/**
* st_kim_ref - reference the core's data
* This references the per-ST platform device in the arch/xx/
@@ -637,9 +642,8 @@ struct dentry *kim_debugfs_dir;
static int kim_probe(struct platform_device *pdev)
{
long status;
- long proto;
- long *gpios = pdev->dev.platform_data;
struct kim_data_s *kim_gdata;
+ struct ti_st_plat_data *pdata = pdev->dev.platform_data;
if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
/* multiple devices could exist */
@@ -659,44 +663,24 @@ static int kim_probe(struct platform_device *pdev)
status = st_core_init(&kim_gdata->core_data);
if (status != 0) {
pr_err(" ST core init failed");
- return -1;
+ return -EIO;
}
/* refer to itself */
kim_gdata->core_data->kim_data = kim_gdata;
- for (proto = 0; proto < ST_MAX; proto++) {
- kim_gdata->gpios[proto] = gpios[proto];
- pr_info(" %ld gpio to be requested", gpios[proto]);
+ /* Claim the chip enable nShutdown gpio from the system */
+ kim_gdata->nshutdown = pdata->nshutdown_gpio;
+ status = gpio_request(kim_gdata->nshutdown, "kim");
+ if (unlikely(status)) {
+ pr_err(" gpio %ld request failed ", kim_gdata->nshutdown);
+ return status;
}
- for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
- /* Claim the Bluetooth/FM/GPIO
- * nShutdown gpio from the system
- */
- status = gpio_request(gpios[proto], "kim");
- if (unlikely(status)) {
- pr_err(" gpio %ld request failed ", gpios[proto]);
- proto -= 1;
- while (proto >= 0) {
- if (gpios[proto] != -1)
- gpio_free(gpios[proto]);
- }
- return status;
- }
-
- /* Configure nShutdown GPIO as output=0 */
- status =
- gpio_direction_output(gpios[proto], 0);
- if (unlikely(status)) {
- pr_err(" unable to configure gpio %ld",
- gpios[proto]);
- proto -= 1;
- while (proto >= 0) {
- if (gpios[proto] != -1)
- gpio_free(gpios[proto]);
- }
- return status;
- }
+ /* Configure nShutdown GPIO as output=0 */
+ status = gpio_direction_output(kim_gdata->nshutdown, 0);
+ if (unlikely(status)) {
+ pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown);
+ return status;
}
/* get reference of pdev for request_firmware
*/
@@ -704,34 +688,23 @@ static int kim_probe(struct platform_device *pdev)
init_completion(&kim_gdata->kim_rcvd);
init_completion(&kim_gdata->ldisc_installed);
- for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
- /* TODO: should all types be rfkill_type_bt ? */
- kim_gdata->rf_protos[proto] = proto;
- kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
- &pdev->dev, RFKILL_TYPE_BLUETOOTH,
- &kim_rfkill_ops, &kim_gdata->rf_protos[proto]);
- if (kim_gdata->rfkill[proto] == NULL) {
- pr_err("cannot create rfkill entry for gpio %ld",
- gpios[proto]);
- continue;
- }
- /* block upon creation */
- rfkill_init_sw_state(kim_gdata->rfkill[proto], 1);
- status = rfkill_register(kim_gdata->rfkill[proto]);
- if (unlikely(status)) {
- pr_err("rfkill registration failed for gpio %ld",
- gpios[proto]);
- rfkill_unregister(kim_gdata->rfkill[proto]);
- continue;
- }
- pr_info("rfkill entry created for %ld", gpios[proto]);
+ status = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
+ if (status) {
+ pr_err("failed to create sysfs entries");
+ return status;
}
+ /* copying platform data */
+ strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN);
+ kim_gdata->flow_cntrl = pdata->flow_cntrl;
+ kim_gdata->baud_rate = pdata->baud_rate;
+ pr_info("sysfs entries created\n");
+
kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
if (IS_ERR(kim_debugfs_dir)) {
pr_err(" debugfs entries creation failed ");
kim_debugfs_dir = NULL;
- return -1;
+ return -EIO;
}
debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
@@ -744,25 +717,22 @@ static int kim_probe(struct platform_device *pdev)
static int kim_remove(struct platform_device *pdev)
{
- /* free the GPIOs requested
- */
- long *gpios = pdev->dev.platform_data;
- long proto;
+ /* free the GPIOs requested */
+ struct ti_st_plat_data *pdata = pdev->dev.platform_data;
struct kim_data_s *kim_gdata;
kim_gdata = dev_get_drvdata(&pdev->dev);
- for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
- /* Claim the Bluetooth/FM/GPIO
- * nShutdown gpio from the system
- */
- gpio_free(gpios[proto]);
- rfkill_unregister(kim_gdata->rfkill[proto]);
- rfkill_destroy(kim_gdata->rfkill[proto]);
- kim_gdata->rfkill[proto] = NULL;
- }
- pr_info("kim: GPIO Freed");
+ /* Free the Bluetooth/FM/GPIO
+ * nShutdown gpio from the system
+ */
+ gpio_free(pdata->nshutdown_gpio);
+ pr_info("nshutdown GPIO Freed");
+
debugfs_remove_recursive(kim_debugfs_dir);
+ sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
+ pr_info("sysfs entries removed");
+
kim_gdata->kim_pdev = NULL;
st_core_exit(kim_gdata->core_data);
@@ -771,23 +741,46 @@ static int kim_remove(struct platform_device *pdev)
return 0;
}
+int kim_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct ti_st_plat_data *pdata = pdev->dev.platform_data;
+
+ if (pdata->suspend)
+ return pdata->suspend(pdev, state);
+
+ return -EOPNOTSUPP;
+}
+
+int kim_resume(struct platform_device *pdev)
+{
+ struct ti_st_plat_data *pdata = pdev->dev.platform_data;
+
+ if (pdata->resume)
+ return pdata->resume(pdev);
+
+ return -EOPNOTSUPP;
+}
+
/**********************************************************************/
/* entry point for ST KIM module, called in from ST Core */
+static struct platform_driver kim_platform_driver = {
+ .probe = kim_probe,
+ .remove = kim_remove,
+ .suspend = kim_suspend,
+ .resume = kim_resume,
+ .driver = {
+ .name = "kim",
+ .owner = THIS_MODULE,
+ },
+};
static int __init st_kim_init(void)
{
- long ret = 0;
- ret = platform_driver_register(&kim_platform_driver);
- if (ret != 0) {
- pr_err("platform drv registration failed");
- return -1;
- }
- return 0;
+ return platform_driver_register(&kim_platform_driver);
}
static void __exit st_kim_deinit(void)
{
- /* the following returns void */
platform_driver_unregister(&kim_platform_driver);
}
diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c
index 2bda8dea15b0..3f2495138855 100644
--- a/drivers/misc/ti-st/st_ll.c
+++ b/drivers/misc/ti-st/st_ll.c
@@ -30,7 +30,7 @@ static void send_ll_cmd(struct st_data_s *st_data,
unsigned char cmd)
{
- pr_info("%s: writing %x", __func__, cmd);
+ pr_debug("%s: writing %x", __func__, cmd);
st_int_write(st_data, &cmd, 1);
return;
}
@@ -114,23 +114,23 @@ unsigned long st_ll_sleep_state(struct st_data_s *st_data,
{
switch (cmd) {
case LL_SLEEP_IND: /* sleep ind */
- pr_info("sleep indication recvd");
+ pr_debug("sleep indication recvd");
ll_device_want_to_sleep(st_data);
break;
case LL_SLEEP_ACK: /* sleep ack */
pr_err("sleep ack rcvd: host shouldn't");
break;
case LL_WAKE_UP_IND: /* wake ind */
- pr_info("wake indication recvd");
+ pr_debug("wake indication recvd");
ll_device_want_to_wakeup(st_data);
break;
case LL_WAKE_UP_ACK: /* wake ack */
- pr_info("wake ack rcvd");
+ pr_debug("wake ack rcvd");
st_data->ll_state = ST_LL_AWAKE;
break;
default:
pr_err(" unknown input/state ");
- return -1;
+ return -EINVAL;
}
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 01:04:33 +0000