Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 347 insertions, 0 deletions

diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
new file mode 100644
index 000000000000..65061f5d7410
--- /dev/null
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -0,0 +1,347 @@
+/*
+ *	linux/arch/alpha/kernel/sys_noritake.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the NORITAKE (AlphaServer 1000A), 
+ * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_apecs.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+/* Note mask bit is true for ENABLED irqs.  */
+static int cached_irq_mask;
+
+static inline void
+noritake_update_irq_hw(int irq, int mask)
+{
+	int port = 0x54a;
+	if (irq >= 32) {
+	    mask >>= 16;
+	    port = 0x54c;
+	}
+	outw(mask, port);
+}
+
+static void
+noritake_enable_irq(unsigned int irq)
+{
+	noritake_update_irq_hw(irq, cached_irq_mask |= 1 << (irq - 16));
+}
+
+static void
+noritake_disable_irq(unsigned int irq)
+{
+	noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16)));
+}
+
+static unsigned int
+noritake_startup_irq(unsigned int irq)
+{
+	noritake_enable_irq(irq);
+	return 0;
+}
+
+static struct hw_interrupt_type noritake_irq_type = {
+	.typename	= "NORITAKE",
+	.startup	= noritake_startup_irq,
+	.shutdown	= noritake_disable_irq,
+	.enable		= noritake_enable_irq,
+	.disable	= noritake_disable_irq,
+	.ack		= noritake_disable_irq,
+	.end		= noritake_enable_irq,
+};
+
+static void 
+noritake_device_interrupt(unsigned long vector, struct pt_regs *regs)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary registers of NORITAKE */
+	pld = (((unsigned long) inw(0x54c) << 32)
+	       | ((unsigned long) inw(0x54a) << 16)
+	       | ((unsigned long) inb(0xa0) << 8)
+	       | inb(0x20));
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i < 16) {
+			isa_device_interrupt(vector, regs);
+		} else {
+			handle_irq(i, regs);
+		}
+	}
+}
+
+static void 
+noritake_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+	/*
+	 * I really hate to do this, too, but the NORITAKE SRM console also
+	 * reports PCI vectors *lower* than I expected from the bit numbers
+	 * in the documentation.
+	 * But I really don't want to change the fixup code for allocation
+	 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
+	 * look nice and clean now.
+	 * So, here's this additional grotty hack... :-(
+	 */
+	if (irq >= 16)
+		irq = irq + 1;
+
+	handle_irq(irq, regs);
+}
+
+static void __init
+noritake_init_irq(void)
+{
+	long i;
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = noritake_srm_device_interrupt;
+
+	outw(0, 0x54a);
+	outw(0, 0x54c);
+
+	for (i = 16; i < 48; ++i) {
+		irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
+		irq_desc[i].handler = &noritake_irq_type;
+	}
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ 0x542, summary register #1:
+ * Bit      Meaning
+ * 0        All valid ints from summary regs 2 & 3
+ * 1        QLOGIC ISP1020A SCSI
+ * 2        Interrupt Line A from slot 0
+ * 3        Interrupt Line B from slot 0
+ * 4        Interrupt Line A from slot 1
+ * 5        Interrupt line B from slot 1
+ * 6        Interrupt Line A from slot 2
+ * 7        Interrupt Line B from slot 2
+ * 8        Interrupt Line A from slot 3
+ * 9        Interrupt Line B from slot 3
+ *10        Interrupt Line A from slot 4
+ *11        Interrupt Line B from slot 4
+ *12        Interrupt Line A from slot 5
+ *13        Interrupt Line B from slot 5
+ *14        Interrupt Line A from slot 6
+ *15        Interrupt Line B from slot 6
+ *
+ * Summary @ 0x544, summary register #2:
+ * Bit      Meaning
+ * 0        OR of all unmasked ints in SR #2
+ * 1        OR of secondary bus ints
+ * 2        Interrupt Line C from slot 0
+ * 3        Interrupt Line D from slot 0
+ * 4        Interrupt Line C from slot 1
+ * 5        Interrupt line D from slot 1
+ * 6        Interrupt Line C from slot 2
+ * 7        Interrupt Line D from slot 2
+ * 8        Interrupt Line C from slot 3
+ * 9        Interrupt Line D from slot 3
+ *10        Interrupt Line C from slot 4
+ *11        Interrupt Line D from slot 4
+ *12        Interrupt Line C from slot 5
+ *13        Interrupt Line D from slot 5
+ *14        Interrupt Line C from slot 6
+ *15        Interrupt Line D from slot 6
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  7       Intel PCI-EISA bridge chip
+ *  8       DEC PCI-PCI bridge chip
+ * 11       PCI on board slot 0
+ * 12       PCI on board slot 1
+ * 13       PCI on board slot 2
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+
+static int __init
+noritake_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[15][5] __initdata = {
+		/*INT    INTA   INTB   INTC   INTD */
+		/* note: IDSELs 16, 17, and 25 are CORELLE only */
+		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 17, S3 Trio64 */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCEB */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PPB  */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  ???? */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  ???? */
+		{ 16+2,  16+2,  16+3,  32+2,  32+3},  /* IdSel 22,  slot 0 */
+		{ 16+4,  16+4,  16+5,  32+4,  32+5},  /* IdSel 23,  slot 1 */
+		{ 16+6,  16+6,  16+7,  32+6,  32+7},  /* IdSel 24,  slot 2 */
+		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 25,  slot 3 */
+		/* The following 5 are actually on PCI bus 1, which is 
+		   across the built-in bridge of the NORITAKE only.  */
+		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
+		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 17,  slot 3 */
+		{16+10, 16+10, 16+11, 32+10, 32+11},  /* IdSel 18,  slot 4 */
+		{16+12, 16+12, 16+13, 32+12, 32+13},  /* IdSel 19,  slot 5 */
+		{16+14, 16+14, 16+15, 32+14, 32+15},  /* IdSel 20,  slot 6 */
+	};
+	const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8 __init
+noritake_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot, pin = *pinp;
+
+	if (dev->bus->number == 0) {
+		slot = PCI_SLOT(dev->devfn);
+	}
+	/* Check for the built-in bridge */
+	else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
+		slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
+	}
+	else
+	{
+		/* Must be a card-based bridge.  */
+		do {
+			if (PCI_SLOT(dev->bus->self->devfn) == 8) {
+				slot = PCI_SLOT(dev->devfn) + 15;
+				break;
+			}
+			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ;
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
+static void
+noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr,
+			     struct pt_regs * regs)
+{
+#define MCHK_NO_DEVSEL 0x205U
+#define MCHK_NO_TABT 0x204U
+
+        struct el_common *mchk_header;
+        unsigned int code;
+
+        mchk_header = (struct el_common *)la_ptr;
+
+        /* Clear the error before any reporting.  */
+        mb();
+        mb(); /* magic */
+        draina();
+        apecs_pci_clr_err();
+        wrmces(0x7);
+        mb();
+
+        code = mchk_header->code;
+        process_mcheck_info(vector, la_ptr, regs, "NORITAKE APECS",
+                            (mcheck_expected(0)
+                             && (code == MCHK_NO_DEVSEL
+                                 || code == MCHK_NO_TABT)));
+}
+#endif
+
+
+/*
+ * The System Vectors
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
+struct alpha_machine_vector noritake_mv __initmv = {
+	.vector_name		= "Noritake",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= noritake_apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= noritake_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= noritake_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.pci_map_irq		= noritake_map_irq,
+	.pci_swizzle		= noritake_swizzle,
+};
+ALIAS_MV(noritake)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
+struct alpha_machine_vector noritake_primo_mv __initmv = {
+	.vector_name		= "Noritake-Primo",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= noritake_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= noritake_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cia_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= noritake_map_irq,
+	.pci_swizzle		= noritake_swizzle,
+};
+ALIAS_MV(noritake_primo)
+#endif