From be8a77c54815b311485a348547ec80803ee9415b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 13 Sep 2014 00:34:29 +0200 Subject: ARM: dts: rockchip: add operating points and armclk references Add basic OPP entries for current supported Rockchip SoCs. The operating points are currently very conservative, so individual boards may opt to redefine them. Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang --- arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++- arch/arm/boot/dts/rk3188.dtsi | 15 ++++++++++++++- arch/arm/boot/dts/rk3288.dtsi | 19 ++++++++++++++++++- 3 files changed, 43 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index ad9c2db59670..8b11fbd58071 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -26,11 +26,21 @@ #size-cells = <0>; enable-method = "rockchip,rk3066-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; + operating-points = < + /* kHz uV */ + 1008000 1075000 + 816000 1025000 + 600000 1025000 + 504000 1000000 + 312000 975000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@1 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ddaada788b45..ae4f04984d86 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -26,11 +26,24 @@ #size-cells = <0>; enable-method = "rockchip,rk3066-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; + operating-points = < + /* kHz uV */ + 1608000 1350000 + 1416000 1250000 + 1200000 1150000 + 1008000 1075000 + 816000 975000 + 600000 950000 + 504000 925000 + 312000 875000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@1 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 874e66dbb93b..cb18bb457568 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -47,10 +47,27 @@ #address-cells = <1>; #size-cells = <0>; - cpu@500 { + cpu0: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x500>; + operating-points = < + /* KHz uV */ + 1608000 1350000 + 1512000 1300000 + 1416000 1200000 + 1200000 1100000 + 1008000 1050000 + 816000 1000000 + 696000 950000 + 600000 900000 + 408000 900000 + 312000 900000 + 216000 900000 + 126000 900000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@501 { device_type = "cpu"; -- cgit v1.2.3 From 3adb1327fb020394a10394a5117ac7d2ec5334d3 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 13 Sep 2014 00:34:30 +0200 Subject: ARM: dts: rockchip: add cpu supplies to boards This adds the cpu-supplies to the curie2, radxarock and rk3288-evb-rk808 boards. The rk3288-evb-act8846 variant cannot provide the cpu-regulator at the moment so will get its supply later. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 ++++ arch/arm/boot/dts/rk3188-radxarock.dts | 6 +++++- arch/arm/boot/dts/rk3288-evb-rk808.dts | 6 +++++- 3 files changed, 14 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index d5344510c676..baf21ac6ce7f 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -60,6 +60,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 15910c9ddbc7..0950a0524947 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -118,6 +118,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -159,7 +163,7 @@ vdd_arm: REG3 { regulator-name = "VDD_ARM"; regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; regulator-always-on; }; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index ff522f8e3df4..d8c775e6d5fe 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -17,6 +17,10 @@ compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -44,7 +48,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; regulator-name = "vdd_arm"; }; -- cgit v1.2.3 From b3e3a7b25825407144a0178f291b20697f1537fb Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Fri, 10 Oct 2014 10:04:13 +0200 Subject: ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188 According to the RK3066 and RK3188 TRM, the two SPI controllers support DMA handshake interface. Add the DMA properties so they can be used when needed. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3xxx.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 499468d42ada..9ba92de511ca 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -367,6 +367,8 @@ reg = <0x20070000 0x1000>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac2 10>, <&dmac2 11>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -378,6 +380,8 @@ reg = <0x20074000 0x1000>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac2 12>, <&dmac2 13>; + dma-names = "tx", "rx"; status = "disabled"; }; }; -- cgit v1.2.3 From 5fe62b83cfed00b10b70593e95ffbeadf77ece78 Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Tue, 14 Oct 2014 10:16:37 +0200 Subject: ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188 Add the I2S/PCM controller nodes and pin controls for rk3066 and rk3188. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a.dtsi | 81 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3188.dtsi | 26 ++++++++++++++ 2 files changed, 107 insertions(+) diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 8b11fbd58071..0e99470db772 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -63,6 +63,51 @@ }; }; + i2s0: i2s@10118000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x10118000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + dmas = <&dmac1_s 4>, <&dmac1_s 5>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + status = "disabled"; + }; + + i2s1: i2s@1011a000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x1011a000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + dmas = <&dmac1_s 6>, <&dmac1_s 7>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; + status = "disabled"; + }; + + i2s2: i2s@1011c000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x1011c000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + dmas = <&dmac1_s 9>, <&dmac1_s 10>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; @@ -415,6 +460,42 @@ ; }; }; + + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = , + , + , + , + , + , + , + , + ; + }; + }; + + i2s1 { + i2s1_bus: i2s1-bus { + rockchip,pins = , + , + , + , + , + ; + }; + }; + + i2s2 { + i2s2_bus: i2s2-bus { + rockchip,pins = , + , + , + , + , + ; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ae4f04984d86..b24e04f6ccc7 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -78,6 +78,21 @@ }; }; + i2s0: i2s@1011a000 { + compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s"; + reg = <0x1011a000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + dmas = <&dmac1_s 6>, <&dmac1_s 7>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; @@ -408,6 +423,17 @@ ; }; }; + + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = , + , + , + , + , + ; + }; + }; }; }; -- cgit v1.2.3 From cd78d0cd63ebce518b5c342fe6ef1f4613bb039d Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Thu, 9 Oct 2014 21:50:30 -0700 Subject: ARM: dts: rockchip: enable init rate for clock We need to initialize PLL rate and some of bus clock rate while kernel init, for there is no other module will do that. Basically on rk3288 we use GPLL for cpu bus, peripheral bus and most of peripheral clock, CPLL for devices who require 50M/200M clock rate, leave NPLL behind for special requirement from display system. The common-clock-framework will help us to select best source for child clocks after we init the PLLs propriety. Signed-off-by: Kever Yang Reviewed-by: Doug Anderson Tested-by: Doug Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cb18bb457568..b53e833e5667 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -472,6 +472,16 @@ rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, <&cru ACLK_CPU>, + <&cru HCLK_CPU>, <&cru PCLK_CPU>, + <&cru ACLK_PERI>, <&cru HCLK_PERI>, + <&cru PCLK_PERI>; + assigned-clock-rates = <594000000>, <400000000>, + <500000000>, <300000000>, + <150000000>, <75000000>, + <300000000>, <150000000>, + <75000000>; }; grf: syscon@ff770000 { -- cgit v1.2.3 From a99eb770b4ab561434c9049b7b09cf40e27d3a55 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:04 +0200 Subject: ARM: dts: sun7i: Add spi0_pins_a pinctrl setting Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 82097c905c48..4fb893080722 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -784,6 +784,13 @@ allwinner,pull = <0>; }; + spi0_pins_a: spi0@0 { + allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; + allwinner,function = "spi0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + spi1_pins_a: spi1@0 { allwinner,pins = "PI16", "PI17", "PI18", "PI19"; allwinner,function = "spi1"; -- cgit v1.2.3 From 46e9fd407fad0e9442d0feb9b678d81839ea29a1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:05 +0200 Subject: ARM: dts: sun7i: Add uart3_pins_b pinctrl setting The uart3_pins_a multiplexes the uart3 pins to port G, add a pinctrl entry for mapping them to port H (as used on the Bananapi). Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4fb893080722..cecf32ce9ade 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -677,6 +677,13 @@ allwinner,pull = <0>; }; + uart3_pins_b: uart3@1 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart4_pins_a: uart4@0 { allwinner,pins = "PG10", "PG11"; allwinner,function = "uart4"; -- cgit v1.2.3 From 8a5b272fbf446ce475bb434b956a45a666936af4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:06 +0200 Subject: ARM: dts: sun7i: Add Banana Pi board The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expenansion headers: http://www.lemaker.org/ Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++ 2 files changed, 215 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..63422bde3a46 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -435,6 +435,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-hummingbird.dtb \ sun6i-a31-m9.dtb dtb-$(CONFIG_MACH_SUN7I) += \ + sun7i-a20-bananapi.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts new file mode 100644 index 000000000000..0e7c9f552b58 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -0,0 +1,214 @@ +/* + * Copyright 2014 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "LeMaker Banana Pi"; + compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; + + soc@01c00000 { + spi0: spi@01c05000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; + }; + + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 0>; /* PH10 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + gmac_power_pin_bananapi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_bananapi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; + }; + + uart7: serial@01c29c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapi>; + + green { + label = "bananapi:green:usr"; + gpios = <&pio 7 24 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&pio 7 23 0>; + }; +}; -- cgit v1.2.3 From 1566a6eab7cfa98eea3ccf0167eda61396234008 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 16:25:36 +0200 Subject: ARM: dts: sun7i: Add mmc2_pins_a pinctrl definition Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index cecf32ce9ade..f0a75c6523a1 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -833,6 +833,13 @@ allwinner,pull = <1>; }; + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <2>; + allwinner,pull = <1>; + }; + mmc3_pins_a: mmc3@0 { allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; allwinner,function = "mmc3"; -- cgit v1.2.3 From f9554fb4763ae7c96422d54be8c0a7c15d311830 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 16:25:37 +0200 Subject: ARM: dts: sun7i: Add Mele M3 board The Mele M3 is yet another Allwinnner based Android top set box from Mele. It uses a housing similar to the A2000, but without the USM sata storage slot at the top. It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-m3.dts | 168 +++++++++++++++++++++++++++++++++++++ 2 files changed, 169 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-m3.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 63422bde3a46..86669feaeac0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -440,6 +440,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-m3.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts new file mode 100644 index 000000000000..ce071417e029 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -0,0 +1,168 @@ +/* + * Copyright 2014 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Mele M3"; + compatible = "mele,m3", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc2: mmc@01c11000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + led_pins_m3: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m3>; + + blue { + label = "m3:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; +}; -- cgit v1.2.3 From 35669b39f1219ecb58ed84664545c1136d855d27 Mon Sep 17 00:00:00 2001 From: Iain Paton Date: Fri, 10 Oct 2014 14:15:24 +0100 Subject: ARM: sun7i: add support for A20-OLinuXino-Lime2 This adds support for the Olimex A20-OLinuXino-Lime2 https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2 Differences to previous Lime boards are 1GB RAM and gigabit ethernet Signed-off-by: Iain Paton Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 228 ++++++++++++++++++++++++ 2 files changed, 229 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 86669feaeac0..a84668ab774c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -442,6 +442,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts new file mode 100644 index 000000000000..187729a0b7d8 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -0,0 +1,228 @@ +/* + * Copyright 2014 - Iain Paton + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Olimex A20-OLinuXino-LIME2"; + compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <®_axp_ipsout>; + vin2-supply = <®_axp_ipsout>; + vin3-supply = <®_axp_ipsout>; + ldo24in-supply = <®_axp_ipsout>; + ldo3in-supply = <®_axp_ipsout>; + + regulators { + vdd_rtc: ldo1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + avcc: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_csi0: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + vcc_csi1: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_cpu: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; + + vdd_int: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + }; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a20-olinuxino-lime2:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 0>; + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_axp_ipsout: axp_ipsout { + compatible = "regulator-fixed"; + regulator-name = "axp-ipsout"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; -- cgit v1.2.3 From 4ab328f06e305bf3ea254f4e3c94bb4d820998c1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 8 Oct 2014 21:02:53 +0800 Subject: ARM: dts: sunxi: Add Allwinner A80 dtsi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Allwinner A80 is a new multi-purpose SoC with 4 Cortex-A7 and 4 Cortex-A15 cores in a big.LITTLE architecture, and a 64-core PowerVR G6230 GPU. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Andreas Färber --- arch/arm/boot/dts/sun9i-a80.dtsi | 257 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100644 arch/arm/boot/dts/sun9i-a80.dtsi diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi new file mode 100644 index 000000000000..5e2ec4b71f5b --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -0,0 +1,257 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &r_uart; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x3>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + memory { + /* 8GB max. with LPAE */ + reg = <0 0x20000000 0x02 0>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + /* + * map 64 bit address range down to 32 bits, + * as the peripherals are all under 512MB. + */ + ranges = <0 0 0 0x20000000>; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* + * map 64 bit address range down to 32 bits, + * as the peripherals are all under 512MB. + */ + ranges = <0 0 0 0x20000000>; + + gic: interrupt-controller@01c41000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c41000 0x1000>, + <0x01c42000 0x1000>, + <0x01c44000 0x2000>, + <0x01c46000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + + timer@06000c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x06000c00 0xa0>; + interrupts = <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>, + <0 23 4>; + + clocks = <&osc24M>; + }; + + uart0: serial@07000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000000 0x400>; + interrupts = <0 0 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart1: serial@07000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000400 0x400>; + interrupts = <0 1 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart2: serial@07000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000800 0x400>; + interrupts = <0 2 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart3: serial@07000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000c00 0x400>; + interrupts = <0 3 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart4: serial@07001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07001000 0x400>; + interrupts = <0 4 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart5: serial@07001400 { + compatible = "snps,dw-apb-uart"; + reg = <0x07001400 0x400>; + interrupts = <0 5 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + r_wdt: watchdog@08001000 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x08001000 0x20>; + interrupts = <0 36 4>; + }; + + r_uart: serial@08002800 { + compatible = "snps,dw-apb-uart"; + reg = <0x08002800 0x400>; + interrupts = <0 38 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3 From f49a430c14560a263965a95ac3b86578917c6e72 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 8 Oct 2014 21:02:54 +0800 Subject: ARM: dts: sun9i: Add A80 Optimus Board support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The A80 Optimus Board is was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash, 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. This patch adds only basic support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Andreas Färber --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a84668ab774c..766a35b2bc54 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -447,6 +447,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb +dtb-$(CONFIG_MACH_SUN9I) += \ + sun9i-a80-optimus.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts new file mode 100644 index 000000000000..f83abab108b9 --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun9i-a80.dtsi" + +/ { + model = "Merrii A80 Optimus Board"; + compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: serial@07000000 { + status = "okay"; + }; + }; +}; -- cgit v1.2.3 From 19fd45bf5f642e409081130e568e134fa11281b7 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 07:20:52 +0900 Subject: ARM: dts: Prepare node labels for exynos5250 Allows them to be extended by reference. Reviewed-by: Doug Anderson Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f21b9aa00fbb..012b0211afed 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -218,7 +218,7 @@ clock-names = "fimg2d"; }; - codec@11000000 { + mfc: codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; @@ -227,7 +227,7 @@ clock-names = "mfc"; }; - rtc@101E0000 { + rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -261,7 +261,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - sata@122F0000 { + sata: sata@122F0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; @@ -573,7 +573,7 @@ #phy-cells = <1>; }; - usb@12110000 { + ehci: usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; interrupts = <0 71 0>; @@ -588,7 +588,7 @@ }; }; - usb@12120000 { + ohci: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <0 71 0>; @@ -710,7 +710,7 @@ clock-names = "gscl"; }; - hdmi { + hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; @@ -736,14 +736,14 @@ #phy-cells = <0>; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; - fimd@14400000 { + fimd: fimd@14400000 { clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; -- cgit v1.2.3 From ca5423e8b2627919075c61570d283590e172f6f0 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 07:49:39 +0900 Subject: ARM: dts: Clean up exynos5250-snow Use the new style of referencing inherited nodes and use symbolic names. Reorder one pinctrl node in GPIO order. Goal is the alignment of all exynos5250 based device trees for comparison. Suggested-by: Doug Anderson Reviewed-by: Doug Anderson Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa [kgene.kim@samsung.com: rebased and squashed] Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 259 +++++++++++++++++----------------- 1 file changed, 129 insertions(+), 130 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index e51fcef884a4..2ad52f7a177d 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -6,10 +6,12 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include +#include +#include #include "exynos5250.dtsi" / { @@ -27,89 +29,19 @@ chosen { }; - rtc@101E0000 { - status = "okay"; - }; - - pinctrl@11400000 { - ec_irq: ec-irq { - samsung,pins = "gpx1-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - sd3_clk: sd3-clk { - samsung,pin-drv = <0>; - }; - - sd3_cmd: sd3-cmd { - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - sd3_bus4: sd3-bus-width4 { - samsung,pin-drv = <0>; - }; - - max98095_en: max98095-en { - samsung,pins = "gpx1-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - tps65090_irq: tps65090-irq { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb3_vbus_en: usb3-vbus-en { - samsung,pins = "gpx2-7"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@13400000 { - arb_their_claim: arb-their-claim { - samsung,pins = "gpe0-4"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - arb_our_claim: arb-our-claim { - samsung,pins = "gpf0-3"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - gpio-keys { compatible = "gpio-keys"; power { label = "Power"; - gpios = <&gpx1 3 1>; - linux,code = <116>; /* KEY_POWER */ + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = ; gpio-key,wakeup; }; lid-switch { label = "Lid"; - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; @@ -130,8 +62,8 @@ i2c-parent = <&{/i2c@12CA0000}>; - our-claim-gpio = <&gpf0 3 1>; - their-claim-gpios = <&gpe0 4 1>; + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; slew-delay-us = <10>; wait-retry-us = <3000>; wait-free-us = <50000>; @@ -154,7 +86,7 @@ cros_ec: embedded-controller { compatible = "google,cros-ec-i2c"; reg = <0x1e>; - interrupts = <6 0>; + interrupts = <6 IRQ_TYPE_NONE>; interrupt-parent = <&gpx1>; pinctrl-names = "default"; pinctrl-0 = <&ec_irq>; @@ -241,13 +173,6 @@ }; i2c@12CD0000 { - max98095: codec@11 { - compatible = "maxim,max98095"; - reg = <0x11>; - pinctrl-0 = <&max98095_en>; - pinctrl-names = "default"; - }; - ptn3460: lvds-bridge@20 { compatible = "nxp,ptn3460"; reg = <0x20>; @@ -258,10 +183,6 @@ }; }; - i2s0: i2s@03830000 { - status = "okay"; - }; - sound { compatible = "google,snow-audio-max98095"; @@ -275,20 +196,12 @@ regulator-name = "P5.0V_USB3CON"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpx2 7 0>; + gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb3_vbus_en>; enable-active-high; }; - phy@12100000 { - vbus-supply = <&usb3_vbus_reg>; - }; - - usb@12110000 { - samsung,vbus-gpio = <&gpx1 1 0>; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -296,18 +209,6 @@ }; }; - hdmi { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - hdmi-en-supply = <&tps65090_fet7>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; @@ -319,30 +220,45 @@ pinctrl-names = "default"; }; - fimd@14400000 { - status = "okay"; - samsung,invert-vclk; - }; - panel: panel { compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>; }; - dp-controller@145B0000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx0 7 0>; - bridge = <&ptn3460>; - }; +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + bridge = <&ptn3460>; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; }; &i2c_0 { @@ -353,7 +269,7 @@ max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; wakeup-source; @@ -503,7 +419,7 @@ trackpad { reg = <0x67>; compatible = "cypress,cyapa"; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; interrupt-parent = <&gpx1>; wakeup-source; }; @@ -550,6 +466,13 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + + max98095: codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + pinctrl-0 = <&max98095_en>; + pinctrl-names = "default"; + }; }; &i2c_8 { @@ -563,6 +486,10 @@ }; }; +&i2s0 { + status = "okay"; +}; + &mmc_0 { status = "okay"; num-slots = <1>; @@ -587,7 +514,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; bus-width = <4>; - wp-gpios = <&gpc2 1 0>; + wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; cap-sd-highspeed; }; @@ -610,12 +537,80 @@ }; &pinctrl_0 { + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + max98095_en: max98095-en { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; samsung,pin-function = <0>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sd3_bus4 { + samsung,pin-drv = <0>; +}; + +&sd3_clk { + samsung,pin-drv = <0>; +}; + +&sd3_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; &spi_1 { @@ -624,4 +619,8 @@ num-cs = <1>; }; +&usbdrd_phy { + vbus-supply = <&usb3_vbus_reg>; +}; + #include "cros-ec-keyboard.dtsi" -- cgit v1.2.3 From 5140e29d67cd4be66f25506a7d2a77c0ee79c1b2 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 08:03:57 +0900 Subject: ARM: dts: Fill in bootargs for exynos5250-snow exynos5250-cros-common.dtsi had an empty /chosen node. Fill in exemplary boot arguments. Reviewed-by: Tomasz Figa Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 2ad52f7a177d..3c6c97e52526 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -27,6 +27,7 @@ }; chosen { + bootargs = "console=tty1"; }; gpio-keys { -- cgit v1.2.3 From adca3e614ed6cca2028161183c124d730733ccaf Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 23:53:20 +0900 Subject: ARM: dts: Clean up exynos5250-smdk5250 Use the new style for referencing inherited nodes and use symbolic names. Goal is the alignment of all exynos5250 based device trees for comparison. Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa [kgene.kim@samsung.com: rebased and squashed] Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 618 +++++++++++++++--------------- arch/arm/boot/dts/exynos5250-snow.dts | 1 + 2 files changed, 312 insertions(+), 307 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 6a0f4c0ff763..bc27cc2558fe 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -7,9 +7,11 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; +#include +#include #include "exynos5250.dtsi" / { @@ -27,165 +29,6 @@ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; - rtc@101E0000 { - status = "okay"; - }; - - i2c@12C60000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - status = "okay"; - - eeprom@50 { - compatible = "samsung,s524ad0xd1"; - reg = <0x50>; - }; - - max77686@09 { - compatible = "maxim,max77686"; - reg = <0x09>; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.2V_LDO_OUT2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "P2.8V_LDO_OUT4"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "P1.8V_LDO_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo6_reg: LDO6 { - regulator-name = "P1.1V_LDO_OUT6"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo11_reg: LDO11 { - regulator-name = "P1.8V_LDO_OUT11"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "P1.8V_LDO_OUT13"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - }; - vdd: fixed-regulator@0 { compatible = "regulator-fixed"; regulator-name = "vdd-supply"; @@ -210,199 +53,360 @@ regulator-always-on; }; - i2c@12C70000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - status = "okay"; + sound { + compatible = "samsung,smdk-wm8994"; - eeprom@51 { - compatible = "samsung,s524ad0xd1"; - reg = <0x51>; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&wm8994>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; }; - wm8994: wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; + codec_mclk: codec-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16934000>; + }; + }; +}; - gpio-controller; - #gpio-cells = <2>; +&dp { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + status = "okay"; +}; - clocks = <&codec_mclk>; - clock-names = "MCLK1"; +&ehci { + samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; +}; - AVDD2-supply = <&vdd>; - CPVDD-supply = <&vdd>; - DBVDD-supply = <&dbvdd>; - SPKVDD1-supply = <&spkvdd>; - SPKVDD2-supply = <&spkvdd>; +&fimd { + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 1280x800 */ + clock-frequency = <50000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <4>; + hback-porch = <4>; + hsync-len = <4>; + vback-porch = <4>; + vfront-porch = <4>; + vsync-len = <4>; }; }; +}; - i2c@121D0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - status = "okay"; +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; +}; - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + + eeprom@50 { + compatible = "samsung,s524ad0xd1"; + reg = <0x50>; }; - i2c@12C80000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; + max77686@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; + ldo2_reg: LDO2 { + regulator-name = "P1.2V_LDO_OUT2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - i2c@12CE0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; + ldo4_reg: LDO4 { + regulator-name = "P2.8V_LDO_OUT4"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; - sata@122F0000 { - status = "okay"; - }; + ldo5_reg: LDO5 { + regulator-name = "P1.8V_LDO_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - sata-phy@12170000 { - status = "okay"; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; - }; + ldo6_reg: LDO6 { + regulator-name = "P1.1V_LDO_OUT6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; - mmc@12200000 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; - }; + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; - mmc@12220000 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - }; + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - spi_1: spi@12d30000 { - cs-gpios = <&gpa2 5 0>; - status = "okay"; + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - w25q80bw@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <1000000>; + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - controller-data { - samsung,spi-feedback-delay = <0>; + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; }; }; }; +}; - hdmi { - hpd-gpio = <&gpx3 7 0>; - }; +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + eeprom@51 { + compatible = "samsung,s524ad0xd1"; + reg = <0x51>; }; - i2s0: i2s@03830000 { - status = "okay"; + wm8994: wm8994@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&codec_mclk>; + clock-names = "MCLK1"; + + AVDD2-supply = <&vdd>; + CPVDD-supply = <&vdd>; + DBVDD-supply = <&dbvdd>; + SPKVDD1-supply = <&spkvdd>; + SPKVDD2-supply = <&spkvdd>; }; +}; - sound { - compatible = "samsung,smdk-wm8994"; +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; - samsung,i2s-controller = <&i2s0>; - samsung,audio-codec = <&wm8994>; + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; }; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; - usb@12110000 { - samsung,vbus-gpio = <&gpx2 6 0>; + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; }; +}; + +&i2c_9 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; - dp-controller@145B0000 { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - status = "okay"; + sata_phy_i2c: sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; }; +}; - fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 1280x800 */ - clock-frequency = <50000>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <4>; - hback-porch = <4>; - hsync-len = <4>; - vback-porch = <4>; - vfront-porch = <4>; - vsync-len = <4>; - }; +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; +}; + +&spi_1 { + status = "okay"; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + samsung,spi-feedback-delay = <0>; }; - }; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <24000000>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; }; - codec_mclk: codec-mclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16934000>; + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 3c6c97e52526..7f24b00255e6 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -226,6 +226,7 @@ power-supply = <&fet6>; backlight = <&backlight>; }; +}; &dp { status = "okay"; -- cgit v1.2.3 From c71335e7e876d2c26e60caf667021fa19fb14e1d Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:00:46 +0900 Subject: ARM: dts: Clean up exynos5250-arndale Use the new style of referencing inherited nodes, use symbolic names, tidy indentation and reorder includes. Goal is the alignment of all exynos5250 based device trees for comparison. Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa [kgene.kim@samsung.com: rebased] Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 909 ++++++++++++++++--------------- 1 file changed, 456 insertions(+), 453 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 3acd97eb6630..54d8b7ec313b 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -7,12 +7,13 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; -#include "exynos5250.dtsi" +#include #include #include +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -26,465 +27,52 @@ bootargs = "console=ttySAC2,115200"; }; - rtc@101E0000 { - status = "okay"; - }; - - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - }; - - i2c@12C60000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - samsung,i2c-slave-addr = <0x66>; - status = "okay"; - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - - vinb1-supply = <&main_dc_reg>; - vinb2-supply = <&main_dc_reg>; - vinb3-supply = <&main_dc_reg>; - vinb4-supply = <&main_dc_reg>; - vinb5-supply = <&main_dc_reg>; - vinb6-supply = <&main_dc_reg>; - vinb7-supply = <&main_dc_reg>; - vinb8-supply = <&main_dc_reg>; - vinb9-supply = <&main_dc_reg>; - - vinl1-supply = <&buck7_reg>; - vinl2-supply = <&buck7_reg>; - vinl3-supply = <&buck7_reg>; - vinl4-supply = <&main_dc_reg>; - vinl5-supply = <&main_dc_reg>; - vinl6-supply = <&main_dc_reg>; - vinl7-supply = <&main_dc_reg>; - vinl8-supply = <&buck8_reg>; - vinl9-supply = <&buck8_reg>; - - s5m8767,pmic-buck2-dvs-voltage = <1300000>; - s5m8767,pmic-buck3-dvs-voltage = <1100000>; - s5m8767,pmic-buck4-dvs-voltage = <1200000>; - s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>, - <&gpd1 1 0>, - <&gpd1 2 0>; - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_28IO_DP_1.35V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD_COMMON1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD_IOPERI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD_MPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD_XPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD_COMMON2_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD_33ON_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD_COMMON3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_ABB2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_USB_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_COMMON4_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo17_reg: LDO17 { - regulator-name = "VDDQ_MMC2_3_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo18_reg: LDO18 { - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo22_reg: LDO22 { - regulator-name = "EXT_33_OFF"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - op_mode = <1>; - }; - - ldo23_reg: LDO23 { - regulator-name = "EXT_28_OFF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo25_reg: LDO25 { - regulator-name = "PVDD_LDO25"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - op_mode = <1>; - }; - - ldo26_reg: LDO26 { - regulator-name = "EXT_18_OFF"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - op_mode = <1>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_MEM_1.35V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1355000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck7_reg: BUCK7 { - regulator-name = "PVDD_BUCK7"; - regulator-always-on; - op_mode = <1>; - }; - - buck8_reg: BUCK8 { - regulator-name = "PVDD_BUCK8"; - regulator-always-on; - op_mode = <1>; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_33_OFF_EXT1"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - }; - }; - }; - - i2c@12C80000 { - status = "okay"; - - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - i2c@12C90000 { - status = "okay"; - - wm1811a@1a { - - compatible = "wlf,wm1811"; - reg = <0x1a>; - - AVDD2-supply = <&main_dc_reg>; - CPVDD-supply = <&main_dc_reg>; - DBVDD1-supply = <&main_dc_reg>; - DBVDD2-supply = <&main_dc_reg>; - DBVDD3-supply = <&main_dc_reg>; - LDO1VDD-supply = <&main_dc_reg>; - SPKVDD1-supply = <&main_dc_reg>; - SPKVDD2-supply = <&main_dc_reg>; - - wlf,ldo1ena = <&gpb0 0 0>; - wlf,ldo2ena = <&gpb0 1 0>; - }; - }; - - i2c@12CE0000 { - status = "okay"; - - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x38>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; - - i2c@121D0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; - }; - - sata@122F0000 { - status = "okay"; - }; - - sata-phy@12170000 { - status = "okay"; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; - }; - - mmc_0: mmc@12200000 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - mmc_2: mmc@12220000 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - }; - - i2s0: i2s@03830000 { - status = "okay"; - }; - gpio_keys { compatible = "gpio-keys"; menu { label = "SW-TACT2"; - gpios = <&gpx1 4 1>; + gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; home { label = "SW-TACT3"; - gpios = <&gpx1 5 1>; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; up { label = "SW-TACT4"; - gpios = <&gpx1 6 1>; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; down { label = "SW-TACT5"; - gpios = <&gpx1 7 1>; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; back { label = "SW-TACT6"; - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; wakeup { label = "SW-TACT7"; - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; }; - hdmi { - hpd-gpio = <&gpx3 7 2>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - vdd-supply = <&ldo8_reg>; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -502,7 +90,7 @@ regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 1>; + gpio = <&gpx1 1 GPIO_ACTIVE_LOW>; enable-active-high; }; @@ -520,35 +108,6 @@ }; }; - dp-controller@145B0000 { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - status = "okay"; - }; - - fimd: fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 2560x1600 DP panel */ - clock-frequency = <50000>; - hactive = <2560>; - vactive = <1600>; - hfront-porch = <48>; - hback-porch = <80>; - hsync-len = <32>; - vback-porch = <16>; - vfront-porch = <8>; - vsync-len = <6>; - }; - }; - }; - usb_hub_bus { compatible = "simple-bus"; #address-cells = <1>; @@ -558,8 +117,452 @@ usb_hub: usb_hub { compatible = "smsc,usb3503a"; - reset-gpios = <&gpx3 5 1>; - connect-gpios = <&gpd1 7 1>; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&dp { + status = "okay"; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; +}; + +&fimd { + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 2>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + vinb1-supply = <&main_dc_reg>; + vinb2-supply = <&main_dc_reg>; + vinb3-supply = <&main_dc_reg>; + vinb4-supply = <&main_dc_reg>; + vinb5-supply = <&main_dc_reg>; + vinb6-supply = <&main_dc_reg>; + vinb7-supply = <&main_dc_reg>; + vinb8-supply = <&main_dc_reg>; + vinb9-supply = <&main_dc_reg>; + + vinl1-supply = <&buck7_reg>; + vinl2-supply = <&buck7_reg>; + vinl3-supply = <&buck7_reg>; + vinl4-supply = <&main_dc_reg>; + vinl5-supply = <&main_dc_reg>; + vinl6-supply = <&main_dc_reg>; + vinl7-supply = <&main_dc_reg>; + vinl8-supply = <&buck8_reg>; + vinl9-supply = <&buck8_reg>; + + s5m8767,pmic-buck2-dvs-voltage = <1300000>; + s5m8767,pmic-buck3-dvs-voltage = <1100000>; + s5m8767,pmic-buck4-dvs-voltage = <1200000>; + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, + <&gpd1 1 GPIO_ACTIVE_HIGH>, + <&gpd1 2 GPIO_ACTIVE_HIGH>; + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_28IO_DP_1.35V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD_COMMON1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_IOPERI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD_MPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_XPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD_COMMON2_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD_33ON_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_COMMON3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_ABB2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_COMMON4_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDQ_MMC2_3_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo18_reg: LDO18 { + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo22_reg: LDO22 { + regulator-name = "EXT_33_OFF"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo23_reg: LDO23 { + regulator-name = "EXT_28_OFF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo25_reg: LDO25 { + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + }; + + ldo26_reg: LDO26 { + regulator-name = "EXT_18_OFF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_MEM_1.35V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1355000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck7_reg: BUCK7 { + regulator-name = "PVDD_BUCK7"; + regulator-always-on; + op_mode = <1>; + }; + + buck8_reg: BUCK8 { + regulator-name = "PVDD_BUCK8"; + regulator-always-on; + op_mode = <1>; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_33_OFF_EXT1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; }; }; }; + +&i2c_2 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + + wm1811a@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c_8 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x38>; + + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2c_9 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata_phy_i2c:sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; +}; -- cgit v1.2.3 From e79bfe1244887ac64b2f9dfa9ffbd5a451a61b0c Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:01:28 +0900 Subject: ARM: dts: Fix apparent GPIO typo in exynos5250-arndale The GPIO flag 2 has no constant assigned, so this was probably active-low. Reviewed-by: Tomasz Figa Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 54d8b7ec313b..e01270878dfc 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -155,7 +155,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 2>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; -- cgit v1.2.3 From ceb5b5deaf6ffc2712071d9e89b2acd8eb1651e2 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:01:50 +0900 Subject: ARM: dts: Simplify USB3503 on exynos5250-arndale There's no need for a simple-bus, place the smsc,usb3503a directly into the root node. That's what we're going to do on exynos5250-spring. Reported-by: Tomasz Figa Reviewed-by: Tomasz Figa Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index e01270878dfc..7e728a1b5559 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -108,18 +108,12 @@ }; }; - usb_hub_bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; - // SMSC USB3503 connected in hardware only mode as a PHY - usb_hub: usb_hub { - compatible = "smsc,usb3503a"; - - reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; - }; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; }; }; -- cgit v1.2.3 From 53dd4138bb0afe577027f1fa78b0eba9c1a6a392 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:02:14 +0900 Subject: ARM: dts: Add exynos5250-spring device tree Adds initial support for the HP Chromebook 11. Cc: Vincent Palatin Cc: Doug Anderson Cc: Stephan van Schaik Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa Reviewed-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++ 2 files changed, 537 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..4a75e293cd40 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts new file mode 100644 index 000000000000..f5566f84d885 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -0,0 +1,536 @@ +/* + * Google Spring board device tree source + * + * Copyright (c) 2013 Google, Inc + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include +#include +#include "exynos5250.dtsi" + +/ { + model = "Google Spring"; + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>, <&lid_irq>; + + power { + label = "Power"; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + usb-hub { + compatible = "smsc,usb3503a"; + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <1>; + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + s5m8767-pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ + + /* + * The following arrays of DVS voltages are not used, since we are + * not using GPIOs to control PMIC bucks, but they must be defined + * to please the driver. + */ + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", + "en32khz_cp", + "en32khz_bt"; + }; + + regulators { + ldo4_reg: LDO4 { + regulator-name = "P1.0V_LDO_OUT4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo5_reg: LDO5 { + regulator-name = "P1.0V_LDO_OUT5"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_mydp"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo17_reg: LDO17 { + regulator-name = "P2.8V_LDO_OUT17"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo25_reg: LDO25 { + regulator-name = "vdd_bridge"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + op_mode = <3>; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.2V_BUCK_OUT6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <0>; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_ummc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; +}; + +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + }; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +/* + * On Spring we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_1 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl_0 { + s5m8767_dvs: s5m8767-dvs { + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp-hpd-gpio { + samsung,pins = "gpc3-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + s5m8767_ds: s5m8767-ds { + samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + hsic_reset: hsic-reset { + samsung,pins = "gpe1-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&sd1_bus4 { + samsung,pin-drv = <0>; +}; + +&sd1_cd { + samsung,pin-drv = <0>; +}; + +&sd1_clk { + samsung,pin-drv = <0>; +}; + +&sd1_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; +}; + +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; +}; + +#include "cros-ec-keyboard.dtsi" -- cgit v1.2.3 From 5e794de514f56de1e78e979ca09c56a91aa2e9f1 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 00:14:29 +0900 Subject: ARM: dts: Enable PWM node by default for s3c64xx The PWM block is required for system clock source so it must be always enabled. This patch fixes boot issues on SMDK6410 which did not have the node enabled explicitly for other purposes. Fixes: eeb93d02 ("clocksource: of: Respect device tree node status") Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/s3c6410-mini6410.dts | 4 ---- arch/arm/boot/dts/s3c64xx.dtsi | 1 - 2 files changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 57e00f9bce99..a25debb50401 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -198,10 +198,6 @@ status = "okay"; }; -&pwm { - status = "okay"; -}; - &pinctrl0 { gpio_leds: gpio-leds { samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index ff5bdaac987a..0ccb414cd268 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -172,7 +172,6 @@ clocks = <&clocks PCLK_PWM>; samsung,pwm-outputs = <0>, <1>; #pwm-cells = <3>; - status = "disabled"; }; pinctrl0: pinctrl@7f008000 { -- cgit v1.2.3 From fa781ddab92909ae06c83cf14dea09eda81d7ba4 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 24 Sep 2014 00:16:45 +0900 Subject: ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property for the Samsung's S3C Real Time Clock controller that specifies the 32.768 kHz clock that uses the RTC as its source clock. In the case of the Peach Pit and Pi machines, the Maxim 77802 32kHz AP clock is used as the source clock. Signed-off-by: Javier Martinez Canillas Reviewed-by: Doug Anderson Reviewed-by: Chanwoo Choi Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 ++++- arch/arm/boot/dts/exynos5800-peach-pi.dts | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 82cdb74484cc..160c1bf1061e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -12,6 +12,7 @@ #include #include #include +#include #include "exynos5420.dtsi" / { @@ -151,7 +152,7 @@ status = "okay"; clock-frequency = <400000>; - max77802-pmic@9 { + max77802: max77802-pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -727,6 +728,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; }; &spi_2 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7bb1c8dd42dd..fdbcec693b6d 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -12,6 +12,7 @@ #include #include #include +#include #include "exynos5800.dtsi" / { @@ -150,7 +151,7 @@ status = "okay"; clock-frequency = <400000>; - max77802-pmic@9 { + max77802: max77802-pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -715,6 +716,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; }; &spi_2 { -- cgit v1.2.3 From 90fbb382dac5a09e72c3ef4ac7842924fc4f7cc3 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 24 Sep 2014 00:22:01 +0900 Subject: ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property for the Samsung's S3C Real Time Clock controller that specifies the 32.768 kHz clock that uses the RTC as its source clock. In the case of the Exynos5250 based Snow board, the Maxim 77686 32kHz AP clock is used as the source clock. Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 7f24b00255e6..f9bc04b8f7b3 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -10,6 +10,7 @@ /dts-v1/; #include +#include #include #include #include "exynos5250.dtsi" @@ -268,7 +269,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686@09 { + max77686: max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; @@ -600,6 +601,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &sd3_bus4 { -- cgit v1.2.3 From 65354307c1418ee15de5bcb6cc5a7fe0c2b3d27c Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Wed, 24 Sep 2014 00:39:20 +0900 Subject: ARM: dts: correct the mmc0 capability string for exynos Peach boards MMC capability for HS200 is parsed in mmc/core/host.c as dts string "mmc-hs200-1_8v". This patch corrects the dts string for Exynos5420 based peach-pit and Exynos5800 based peach-pi boards. Signed-off-by: Naveen Krishna Chatradhi Signed-off-by: Vivek Gautam Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 160c1bf1061e..9a050e19a4dc 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -561,7 +561,7 @@ status = "okay"; num-slots = <1>; broken-cd; - caps2-mmc-hs200-1_8v; + mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index fdbcec693b6d..e8fdda827fc9 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -549,7 +549,7 @@ status = "okay"; num-slots = <1>; broken-cd; - caps2-mmc-hs200-1_8v; + mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; -- cgit v1.2.3 From 76fe98b900af6c741da63dfecb0de5f7b52ddb02 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:19:53 +0900 Subject: ARM: dts: Keep eMMC regulators soft-disabled for exynos4412-trats2 In MAX77686 PMIC two regulators dedicated for eMMC memory can be controlled both by I2C interface and a GPIO pin, with the resulting regulator state being a logical OR of both. Since the GPIO control is used both by the kernel and the lowest level bootloader at reset, the regulator should be disabled by I2C control to allow it to be turned off by GPIO control. This patch removes regulator-always-on properties from both regulators and, while at it, also unsupported regulator-mem-off. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 5e066cd87f66..a75034c5b8e8 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -399,8 +399,6 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-mem-off; }; ldo23_reg: ldo23 { @@ -503,8 +501,6 @@ regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-mem-off; }; buck9_reg: buck9 { -- cgit v1.2.3 From 7f41e1cab76e54b218bb7e3282379ed7512c5f7e Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:19:58 +0900 Subject: ARM: dts: Add utility macro to define pin sleep states for exynos4x12-pinctrl This patch adds a convenient macro which constructs an Exynos pinctrl pinconf node containing properties needed to configure sleep state of given pin with given parameters. It will be used by further patch which adds a large number of sleep states for pins that need such configuration on certain boards. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 0865a2e33f97..c141931378e7 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -12,6 +12,22 @@ * published by the Free Software Foundation. */ +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +#define PIN_PDN_OUT0 0 +#define PIN_PDN_OUT1 1 +#define PIN_PDN_INPUT 2 +#define PIN_PDN_PREV 3 + +#define PIN_SLP(_pin, _mode, _pull) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-con-pdn = ; \ + samsung,pin-pud-pdn = ; \ + } + / { pinctrl@11400000 { gpa0: gpa0 { -- cgit v1.2.3 From 09918a98b7579e2155215a33b55c3d527d899b7b Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:20:03 +0900 Subject: ARM: dts: Add sleep mode pin configuration for exynos4412-trats2 This patch adds sleep mode pin configuration using pin control hog mechanism to configure states of GPIO pins in sleep mode. This is required to reduce leakage current in sleep mode and prevent glitching of components on the board. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 316 ++++++++++++++++++++++++++++++++ 1 file changed, 316 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index a75034c5b8e8..61e59eb68c01 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -778,3 +778,319 @@ io-channels = <&adc 2>; /* Battery temperature */ }; }; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-states { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, NONE); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, UP); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, UP); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, NONE); + PIN_SLP(gpc1-1, PREV, NONE); + PIN_SLP(gpc1-2, INPUT, NONE); + PIN_SLP(gpc1-3, INPUT, NONE); + PIN_SLP(gpc1-4, INPUT, NONE); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, INPUT, DOWN); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, INPUT, NONE); + PIN_SLP(gpf0-1, INPUT, NONE); + PIN_SLP(gpf0-2, INPUT, DOWN); + PIN_SLP(gpf0-3, INPUT, DOWN); + PIN_SLP(gpf0-4, INPUT, NONE); + PIN_SLP(gpf0-5, INPUT, DOWN); + PIN_SLP(gpf0-6, INPUT, NONE); + PIN_SLP(gpf0-7, INPUT, DOWN); + + PIN_SLP(gpf1-0, INPUT, DOWN); + PIN_SLP(gpf1-1, INPUT, DOWN); + PIN_SLP(gpf1-2, INPUT, DOWN); + PIN_SLP(gpf1-3, INPUT, DOWN); + PIN_SLP(gpf1-4, INPUT, NONE); + PIN_SLP(gpf1-5, INPUT, NONE); + PIN_SLP(gpf1-6, INPUT, DOWN); + PIN_SLP(gpf1-7, PREV, NONE); + + PIN_SLP(gpf2-0, PREV, NONE); + PIN_SLP(gpf2-1, INPUT, DOWN); + PIN_SLP(gpf2-2, INPUT, DOWN); + PIN_SLP(gpf2-3, INPUT, DOWN); + PIN_SLP(gpf2-4, INPUT, DOWN); + PIN_SLP(gpf2-5, INPUT, DOWN); + PIN_SLP(gpf2-6, INPUT, NONE); + PIN_SLP(gpf2-7, INPUT, NONE); + + PIN_SLP(gpf3-0, INPUT, NONE); + PIN_SLP(gpf3-1, PREV, NONE); + PIN_SLP(gpf3-2, PREV, NONE); + PIN_SLP(gpf3-3, PREV, NONE); + PIN_SLP(gpf3-4, OUT1, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpj0-0, PREV, NONE); + PIN_SLP(gpj0-1, PREV, NONE); + PIN_SLP(gpj0-2, PREV, NONE); + PIN_SLP(gpj0-3, INPUT, DOWN); + PIN_SLP(gpj0-4, PREV, NONE); + PIN_SLP(gpj0-5, PREV, NONE); + PIN_SLP(gpj0-6, INPUT, DOWN); + PIN_SLP(gpj0-7, INPUT, DOWN); + + PIN_SLP(gpj1-0, INPUT, DOWN); + PIN_SLP(gpj1-1, PREV, NONE); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, INPUT, DOWN); + PIN_SLP(gpj1-4, INPUT, DOWN); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + sleep1: sleep-states { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, OUT0, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, DOWN); + PIN_SLP(gpl0-2, INPUT, DOWN); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, PREV, NONE); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, INPUT, DOWN); + PIN_SLP(gpl1-1, INPUT, DOWN); + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, INPUT, DOWN); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, PREV, NONE); + PIN_SLP(gpl2-7, INPUT, DOWN); + + PIN_SLP(gpm0-0, INPUT, DOWN); + PIN_SLP(gpm0-1, INPUT, DOWN); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, INPUT, DOWN); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, INPUT, DOWN); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, INPUT, DOWN); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, INPUT, DOWN); + PIN_SLP(gpm4-5, INPUT, DOWN); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, DOWN); + PIN_SLP(gpy0-3, INPUT, DOWN); + PIN_SLP(gpy0-4, INPUT, DOWN); + PIN_SLP(gpy0-5, INPUT, DOWN); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-states { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-states { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + }; +}; -- cgit v1.2.3 From 7eec1266751bd3a25e35ce88686634c768fedc24 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 24 Sep 2014 01:22:49 +0900 Subject: ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2 The MAX77693 is a companion power management IC for smart phones and tablets. The MAX77693 contains input over-voltage protection (OVP), a fully-integrated 2.5A switching charger for Lithium Ion battery with integrated battery disconnect, OTG/accessory 5V output power, a high-current white LED driver for camera flash, two safeout LDOs, a haptic motor driver, Model Gauge m3 battery fuel gauge and MicroUSB Interface Controller (MUIC). I2C serial interface is used for communicating. Add MAX77693 node to the Trats2 board. This allows using: - charger regulator, - 2 safeout LDO regulators (for USB OTG), - extcon. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 61e59eb68c01..dd9ac66770f7 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include / { model = "Samsung Trats 2 based on Exynos4412"; @@ -22,6 +23,7 @@ aliases { i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; + i2c11 = &i2c_max77693; }; memory { @@ -514,6 +516,36 @@ }; }; + i2c_max77693: i2c-gpio-1 { + compatible = "i2c-gpio"; + gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693@66 { + compatible = "maxim,max77693"; + interrupt-parent = <&gpx1>; + interrupts = <5 2>; + reg = <0x66>; + + regulators { + esafeout1_reg: ESAFEOUT1@1 { + regulator-name = "ESAFEOUT1"; + }; + esafeout2_reg: ESAFEOUT2@2 { + regulator-name = "ESAFEOUT2"; + }; + charger_reg: CHARGER@0 { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + }; + }; + mmc@12550000 { num-slots = <1>; broken-cd; -- cgit v1.2.3 From 752d3a23d1f68de87e3cb6e0a9652143f1ea0a1a Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Wed, 24 Sep 2014 01:33:23 +0900 Subject: ARM: dts: add MFC codec device node for exynos3250 Signed-off-by: Jacek Anaszewski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 693a3275606f..242ddda0a8cd 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -320,6 +320,16 @@ status = "disabled"; }; + mfc: codec@13400000 { + compatible = "samsung,mfc-v7"; + reg = <0x13400000 0x10000>; + interrupts = <0 102 0>; + clock-names = "mfc", "sclk_mfc"; + clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; + samsung,power-domain = <&pd_mfc>; + status = "disabled"; + }; + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; -- cgit v1.2.3 From e540920cf21c2764047b8a6ddaeaa0683624e46e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 17:40:14 +0900 Subject: ARM: dts: add CPU nodes for Exynos4 SoCs Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation when topology is read from DT") fixed GIC driver to filter cluster ID from values returned by cpu_logical_map() for SoCs having registers mapped without per-CPU banking making it is possible to add CPU nodes for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also required by future changes adding initialization of cpuidle states in Exynos cpuidle driver through DT. Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC). Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+) diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 807bb5bf91fc..bcc9e63c8070 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,23 @@ pinctrl2 = &pinctrl_2; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@900 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x900>; + }; + + cpu@901 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x901>; + }; + }; + pmu_system_controller: system-controller@10020000 { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 3c00e6ec9302..dd0a43ec56da 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -22,6 +22,23 @@ / { compatible = "samsung,exynos4212", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <18>; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d8bc059e172f..0f6ec93bb1d8 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -22,6 +22,35 @@ / { compatible = "samsung,exynos4412", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + + cpu@A02 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA02>; + }; + + cpu@A03 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA03>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <20>; }; -- cgit v1.2.3 From 12bfa2854f849486935da89a4a3a021e777dc346 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sunxi: regulators: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Acked-by: Hans de Goede --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index c9c5b10e03eb..fa69adfea7fc 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -3,12 +3,48 @@ * * Copyright 2014 - Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ / { -- cgit v1.2.3 From 27f38a77c004fdab95bd7a3a7540510b1f435d1e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: ba10: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 1763cc7ec023..f3f2974658e4 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From a762e5996536e777ef6adf2711adfca10eb9385c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: hackberry: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 891ea446abae..efc116287e0f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 4684f7db57a92c9035b70c1268125ec55886bd21 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: inet97fv2: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: David Lanzendörfer Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 6b0c37812ade..3e25ee4d3248 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -3,12 +3,48 @@ * * David Lanzendörfer * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From b0946ca329eaaa42ecd36207c55aa2bd4925f133 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: mini xplus: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index b9ecce60f2e7..8b3f97470249 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 74e79cd5b343d6933c27b5cc5e238c061cd1d064 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: olinuxino lime: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index d046d568f5a1..88cf1a531155 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 - Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From bc4c63c3207107d05114109a5b00750287f7e6c9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Emilio López Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 46 +++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index ea9519da5764..fe3c559ca6a8 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 6181a6072ba525dcf73522ce4ae23d73bdba13c9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: r7: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts | 46 ++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 43a93762d4f2..1fa2916eafc2 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From e321f1a68026b7791606003ae0b175ab05d685ca Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 48 +++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index fa44b026483b..916ee8bb826f 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -1,15 +1,49 @@ /* - * Copyright 2012 Maxime Ripard + * Copyright 2012 Maxime Ripard * Copyright 2013 Hans de Goede * - * Maxime Ripard + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From a38e422231dccd0a173c42ef40459af32553d44c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:38 +0200 Subject: ARM: sun6i: colombus: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 46 ++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 546cf6eff5c7..c36b4dc89c13 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 527ebf02d03645221cee742495cea719d7dc9c9a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:39 +0200 Subject: ARM: sun6i: hummingbird: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 46 +++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index f142065b3c1f..6e924d9d2912 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 37ab5ab8ff84a0fdf9f008995d955e8aac9bec28 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun6i: m9: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun6i-a31-m9.dts | 46 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index bc6115da5ae1..c887be6cea3d 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 438989faa1d4496f9ab799ed378c6766eaa24fcb Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: i12: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 6a67712d417a..f38bb1a6656c 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 2c4791cdfab5cd83efbe6ee1ba59c197d49fbcb8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun8i: q8h: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 46 +++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index e9b8cca8dcc1..7f2117ce6985 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -3,12 +3,48 @@ * * Chen-Yu Tsai * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From ac399a971d4094afaf07828c9bdf7c715ba8d167 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 20 Oct 2014 22:10:30 +0800 Subject: ARM: dts: sun9i: Add basic clocks and reset controls Now that we have driver support for the basic clocks, add them to the dtsi and update existing peripherals. Also add reset controls to match. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 177 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 171 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 5e2ec4b71f5b..7bcab5685d0e 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -142,6 +142,135 @@ clock-frequency = <32768>; clock-output-names = "osc32k"; }; + + pll4: clk@0600000c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600000c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll12: clk@0600002c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600002c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll12"; + }; + + gt_clk: clk@0600005c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x0600005c 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "gt"; + }; + + ahb0: clk@06000060 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000060 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb0"; + }; + + ahb1: clk@06000064 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000064 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb1"; + }; + + ahb2: clk@06000068 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000068 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb2"; + }; + + apb0: clk@06000070 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb0-clk"; + reg = <0x06000070 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb0"; + }; + + apb1: clk@06000074 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb1-clk"; + reg = <0x06000074 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb1"; + }; + + cci400_clk: clk@06000078 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x06000078 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "cci400"; + }; + + ahb0_gates: clk@06000580 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; + reg = <0x06000580 0x4>; + clocks = <&ahb0>; + clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", + "ahb0_ss", "ahb0_sd", "ahb0_nand1", + "ahb0_nand0", "ahb0_sdram", + "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", + "ahb0_spi0","ahb0_spi1", "ahb0_spi2", + "ahb0_spi3"; + }; + + ahb1_gates: clk@06000584 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; + reg = <0x06000584 0x4>; + clocks = <&ahb1>; + clock-output-names = "ahb1_usbotg", "ahb1_usbhci", + "ahb1_gmac", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_hstimer", + "ahb1_dma"; + }; + + ahb2_gates: clk@06000588 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; + reg = <0x06000588 0x4>; + clocks = <&ahb2>; + clock-output-names = "ahb2_lcd0", "ahb2_lcd1", + "ahb2_edp", "ahb2_csi", "ahb2_hdmi", + "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; + }; + + apb0_gates: clk@06000590 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-apb0-gates-clk"; + reg = <0x06000590 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_spdif", "apb0_pio", + "apb0_ac97", "apb0_i2s0", "apb0_i2s1", + "apb0_lradc", "apb0_gpadc", "apb0_twd", + "apb0_cirtx"; + }; + + apb1_gates: clk@06000594 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-apb1-gates-clk"; + reg = <0x06000594 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", + "apb1_uart0", "apb1_uart1", + "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5"; + }; }; soc { @@ -165,6 +294,36 @@ interrupts = <1 9 0xf04>; }; + ahb0_resets: reset@060005a0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a0 0x4>; + }; + + ahb1_resets: reset@060005a4 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a4 0x4>; + }; + + ahb2_resets: reset@060005a8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a8 0x4>; + }; + + apb0_resets: reset@060005b0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005b0 0x4>; + }; + + apb1_resets: reset@060005b4 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005b4 0x4>; + }; + timer@06000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; @@ -184,7 +343,8 @@ interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 16>; + resets = <&apb1_resets 16>; status = "disabled"; }; @@ -194,7 +354,8 @@ interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 17>; + resets = <&apb1_resets 17>; status = "disabled"; }; @@ -204,7 +365,8 @@ interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 18>; + resets = <&apb1_resets 18>; status = "disabled"; }; @@ -214,7 +376,8 @@ interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 19>; + resets = <&apb1_resets 19>; status = "disabled"; }; @@ -224,7 +387,8 @@ interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 20>; + resets = <&apb1_resets 20>; status = "disabled"; }; @@ -234,7 +398,8 @@ interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 21>; + resets = <&apb1_resets 21>; status = "disabled"; }; -- cgit v1.2.3 From fa6e2eec15a58ce6a47ad7e8a3ccf3ef917cca35 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Oct 2014 09:29:22 +0200 Subject: ARM: realview: basic device tree implementation This implements basic device tree boot support for the RealView platforms, with a basic device tree for ARM PB1176 as an example. The implementation is done with a new DT-specific board file using only pre-existing bindings for the basic IRQ, timer and serial port drivers. A new compatible type is added to the GIC for the ARM1176. This implementation uses the MFD syscon handle from day one to access the system controller registers, and register the devices using the SoC bus. Cc: Arnd Bergmann Cc: Rob Herring Acked-by: Jason Cooper Signed-off-by: Linus Walleij --- arch/arm/mach-realview/Kconfig | 13 +++++++++++++ arch/arm/mach-realview/Makefile | 1 + arch/arm/mach-realview/realview-dt.c | 32 ++++++++++++++++++++++++++++++++ drivers/irqchip/irq-gic.c | 2 ++ 4 files changed, 48 insertions(+) create mode 100644 arch/arm/mach-realview/realview-dt.c diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 9db2029aa632..565925f37dc5 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,6 +1,19 @@ menu "RealView platform type" depends on ARCH_REALVIEW +config REALVIEW_DT + bool "Support RealView(R) Device Tree based boot" + select ARM_GIC + select MFD_SYSCON + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_REALVIEW + select USE_OF + help + Include support for booting the ARM(R) RealView(R) evaluation + boards using a device tree machine description. + config MACH_REALVIEW_EB bool "Support RealView(R) Emulation Baseboard" select ARM_GIC diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 541fa4c109ef..e07fdf7ae8a7 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -3,6 +3,7 @@ # obj-y := core.o +obj-$(CONFIG_REALVIEW_DT) += realview-dt.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c new file mode 100644 index 000000000000..cc28b89dd48f --- /dev/null +++ b/arch/arm/mach-realview/realview-dt.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2014 Linaro Ltd. + * + * Author: Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include "core.h" + +static const char *realview_dt_platform_compat[] __initconst = { + "arm,realview-eb", + "arm,realview-pb1176", + "arm,realview-pb11mp", + "arm,realview-pba8", + "arm,realview-pbx", + NULL, +}; + +DT_MACHINE_START(REALVIEW_DT, "ARM RealView Machine (Device Tree Support)") +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_256M, +#endif + .dt_compat = realview_dt_platform_compat, + .l2c_aux_val = 0x0, + .l2c_aux_mask = ~0x0, +MACHINE_END diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 38493ff28fa5..7f9be0785c6a 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1041,6 +1041,8 @@ gic_of_init(struct device_node *node, struct device_node *parent) return 0; } IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init); +IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init); +IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); -- cgit v1.2.3 From f123a66cbdc47e31bcb11b59f935bed89343a8ed Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Oct 2014 09:30:45 +0200 Subject: ARM: realview: add device tree and bindings for PB1176 As a first example, add device tree and bindings for the RealView PB1176. Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/arm/arm-boards | 65 ++++++ Documentation/devicetree/bindings/arm/gic.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/arm-realview-pb1176.dts | 247 +++++++++++++++++++++++ 4 files changed, 314 insertions(+) create mode 100644 arch/arm/boot/dts/arm-realview-pb1176.dts diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index c554ed3d44fb..556c8665fdbf 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -92,3 +92,68 @@ Required nodes: - core-module: the root node to the Versatile platforms must have a core-module with regs and the compatible strings "arm,core-module-versatile", "syscon" + +ARM RealView Boards +------------------- +The RealView boards cover tailored evaluation boards that are used to explore +the ARM11 and Cortex A-8 and Cortex A-9 processors. + +Required properties (in root node): + /* RealView Emulation Baseboard */ + compatible = "arm,realview-eb"; + /* RealView Platform Baseboard for ARM1176JZF-S */ + compatible = "arm,realview-pb1176"; + /* RealView Platform Baseboard for ARM11 MPCore */ + compatible = "arm,realview-pb11mp"; + /* RealView Platform Baseboard for Cortex A-8 */ + compatible = "arm,realview-pba8"; + /* RealView Platform Baseboard Explore for Cortex A-9 */ + compatible = "arm,realview-pbx"; + +Required nodes: + +- soc: some node of the RealView platforms must be the SoC + node that contain the SoC-specific devices, withe the compatible + string set to one of these tuples: + "arm,realview-eb-soc", "simple-bus" + "arm,realview-pb1176-soc", "simple-bus" + "arm,realview-pb11mp-soc", "simple-bus" + "arm,realview-pba8-soc", "simple-bus" + "arm,realview-pbx-soc", "simple-bus" + +- syscon: some subnode of the RealView SoC node must be a + system controller node pointing to the control registers, + with the compatible string set to one of these tuples: + "arm,realview-eb-syscon", "syscon" + "arm,realview-pb1176-syscon", "syscon" + "arm,realview-pb11mp-syscon", "syscon" + "arm,realview-pba8-syscon", "syscon" + "arm,realview-pbx-syscon", "syscon" + + Required properties for the system controller: + - regs: the location and size of the system controller registers, + one range of 0x1000 bytes. + +Example: + +/dts-v1/; +#include +#include "skeleton.dtsi" + +/ { + model = "ARM RealView PB1176 with device tree"; + compatible = "arm,realview-pb1176"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-pb1176-soc", "simple-bus"; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-syscon", "syscon"; + reg = <0x10000000 0x1000>; + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index c7d2fa156678..b38608af66db 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -17,6 +17,7 @@ Main node required properties: "arm,cortex-a7-gic" "arm,arm11mp-gic" "brcm,brahma-b15-gic" + "arm,arm1176jzf-devchip-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a and the value shall be 3. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..ab4435a59cd1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -363,6 +363,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-sony-xperia-honami.dtb +dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts new file mode 100644 index 000000000000..3135939cd13f --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -0,0 +1,247 @@ +/* + * Copyright 2014 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include +#include "skeleton.dtsi" + +/ { + model = "ARM RealView PB1176"; + compatible = "arm,realview-pb1176"; + + chosen { }; + + aliases { + serial0 = &pb1176_serial0; + serial1 = &pb1176_serial1; + serial2 = &pb1176_serial2; + serial3 = &pb1176_serial3; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-pb1176-soc", "simple-bus"; + regmap = <&syscon>; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-pb1176-syscon", "syscon"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + }; + + /* Primary DevChip GIC synthesized with the CPU */ + intc_dc1176: interrupt-controller@10120000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10121000 0x1000>, + <0x10120000 0x100>; + }; + + /* This GIC on the board is cascaded off the DevChip GIC */ + intc_pb1176: interrupt-controller@10040000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + }; + + L2: l2-cache { + compatible = "arm,l220-cache"; + reg = <0x10110000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s). + */ + arm,override-auxreg; + cache-size = <131072>; // 128kB + cache-sets = <512>; + cache-line-size = <32>; + }; + + pmu { + compatible = "arm,arm1176-pmu"; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer01: timer@10104000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10104000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer23: timer@10105000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10105000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + arm,sp804-has-irq = <1>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + pb1176_serial0: serial@1010c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010c000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial1: serial@1010d000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010d000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial2: serial@1010e000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010e000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial3: serial@1010f000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010f000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + }; +}; -- cgit v1.2.3 From c7eb3f4a1bf59ec10e54bcb74b4ce2150f2b5615 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Oct 2014 15:26:52 +0200 Subject: ARM: realview: move DT GIC to FPGA node This creates a node in the device tree to hold the FPGA devices as a "simple-bus" and moves the GIC found on the FPGA to this node, so it reflects the actual topology of the system. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 32 +++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 3135939cd13f..f780adde2332 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -153,18 +153,6 @@ <0x10120000 0x100>; }; - /* This GIC on the board is cascaded off the DevChip GIC */ - intc_pb1176: interrupt-controller@10040000 { - compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0x10041000 0x1000>, - <0x10040000 0x100>; - interrupt-parent = <&intc_dc1176>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; - }; - L2: l2-cache { compatible = "arm,l220-cache"; reg = <0x10110000 0x1000>; @@ -244,4 +232,24 @@ clock-names = "uartclk", "apb_pclk"; }; }; + + /* These peripherals are inside the FPGA rather than the DevChip */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + /* This GIC on the board is cascaded off the DevChip GIC */ + intc_fpga1176: interrupt-controller@10040000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; -- cgit v1.2.3 From 75fd1324f91a87655993b52493f2e868b081414b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Oct 2014 15:15:17 +0200 Subject: ARM: realview: add PL061 GPIO to the PB1176 DTS This adds the PL061 GPIO instances found on the PB1176 devchip and the FPGA to the DTS file. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 39 +++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index f780adde2332..4721244a16d6 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -196,6 +196,19 @@ clock-names = "timer1", "timer2", "apb_pclk"; }; + pb1176_gpio0: gpio@1010a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x1010a000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + pb1176_serial0: serial@1010c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010c000 0x1000>; @@ -251,5 +264,31 @@ interrupt-parent = <&intc_dc1176>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; }; + + fpga_gpio0: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + fpga_gpio1: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; }; }; -- cgit v1.2.3 From ad38a34dc671fc3790d2a394e4cf146eb3afbd13 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 11:20:49 +0200 Subject: ARM: realview: add charlcd to PB1176 device tree Extend the PB1176 device tree with the character LCD device. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 4721244a16d6..4ca486796f71 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -253,6 +253,15 @@ compatible = "simple-bus"; ranges; + fpga_charlcd: charlcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + /* This GIC on the board is cascaded off the DevChip GIC */ intc_fpga1176: interrupt-controller@10040000 { compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; -- cgit v1.2.3 From 383caed2e54849e94568a00bbc94db217ccc03ce Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 14:26:06 +0200 Subject: ARM: realview: add RTC clocks to device tree The PB1176 has two PL031 RTC clocks, one in the devchip and one in the FPGA. Add them to the device tree. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 4ca486796f71..0e5b608ab9db 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -196,6 +196,15 @@ clock-names = "timer1", "timer2", "apb_pclk"; }; + pb1176_rtc: rtc@10108000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10108000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + pb1176_gpio0: gpio@1010a000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x1010a000 0x1000>; @@ -299,5 +308,14 @@ clocks = <&pclk>; clock-names = "apb_pclk"; }; + + fpga_rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; }; }; -- cgit v1.2.3 From 24ec3ff329b99427cd2b42d0da3f9e3a6b91dae7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 15:07:55 +0200 Subject: ARM: realview: add PL022 SSP/SPI block to PB1176 DTS Add the PL022 SSP/SPI block to the PL1176 DTS file, also define the separate SSPCLK clock derived from the 24MHz chrystal. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 0e5b608ab9db..313a71756a18 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -56,6 +56,14 @@ clocks = <&xtal24mhz>; }; + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + uartclk: uartclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -218,6 +226,15 @@ clock-names = "apb_pclk"; }; + pb1176_ssp: ssp@1010b000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1010b000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + pb1176_serial0: serial@1010c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010c000 0x1000>; -- cgit v1.2.3 From 7f9ac7dafe1dd99f8b920a40d03f8c231e4da426 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 15:11:31 +0200 Subject: ARM: realview: add FPGA UART4 to PB1176 DTS This adds the UART4 found on the FPGA to the PB1176 DTS file. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 313a71756a18..ac4c1c850db2 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -35,6 +35,7 @@ serial1 = &pb1176_serial1; serial2 = &pb1176_serial2; serial3 = &pb1176_serial3; + serial4 = &fpga_serial; }; memory { @@ -288,6 +289,15 @@ clock-names = "apb_pclk"; }; + fpga_serial: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + /* This GIC on the board is cascaded off the DevChip GIC */ intc_fpga1176: interrupt-controller@10040000 { compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; @@ -334,5 +344,7 @@ clocks = <&pclk>; clock-names = "apb_pclk"; }; + + }; }; -- cgit v1.2.3 From 7406c3957f28aa6528f2d58d638f4f5a306b6122 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 15:21:02 +0200 Subject: ARM: realview: add KMIs to the PB1176 DTS This adds the Keyboard Mouse Interface (KMI) blocks to the PB1176 DTS file, and defines the special KMI clock derived from the 24 MHz chrystal. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index ac4c1c850db2..c292295ac1e3 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -57,6 +57,14 @@ clocks = <&xtal24mhz>; }; + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + sspclk: sspclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -280,6 +288,24 @@ compatible = "simple-bus"; ranges; + fpga_kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + fpga_kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + fpga_charlcd: charlcd@10008000 { compatible = "arm,versatile-lcd"; reg = <0x10008000 0x1000>; -- cgit v1.2.3 From 10d8ddee10b886e4aec0d3e44a73cfa7c35e72e0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 13 Oct 2014 13:21:40 +0200 Subject: ARM: realview: add MMCI to the PB1176 DTS This adds the MMC/SD card reader (MMCI) block to the RealView PB1176 DTS file. Add a special MCLK derived clock and a fixed regulator to represent the 3.3V rail hardwired to the MMC reader on the board. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 36 +++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index c292295ac1e3..ff26c7ed8c41 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -22,6 +22,7 @@ /dts-v1/; #include +#include #include "skeleton.dtsi" / { @@ -43,6 +44,15 @@ reg = <0x00000000 0x08000000>; }; + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -57,6 +67,14 @@ clocks = <&xtal24mhz>; }; + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + kmiclk: kmiclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -288,6 +306,24 @@ compatible = "simple-bus"; ranges; + fpga_mci: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>; + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>; + }; + fpga_kmi0: kmi@10006000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x10006000 0x1000>; -- cgit v1.2.3 From f7b65230019b9dacd69922f925933c8bde1f9ec2 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 7 Jul 2014 09:54:36 +0200 Subject: ARM: shmobile: r8a73a4: Add CMT1 node This describes all of the CMT1 hardware of the r8a73a4. The node is disabled and may be enabled as necessary by board DTS files. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index c17afef92e8d..80939671b034 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -109,6 +109,17 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + + renesas,channels-mask = <0xff>; + status = "disabled"; }; -- cgit v1.2.3 From 95e39682033b9940e17108098f08745b8938ab2c Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 7 Jul 2014 09:54:37 +0200 Subject: ARM: shmobile: r8a73a4: Rename cmt registration helper Rename r8a7790_register_cmt() as r8a73a4_register_cmt() to reflect name of the SoC in use. The use of r8a7790 appears to be due to historical sharing of code from that SoC. Shared code is no longer used. Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a73a4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 53f40b70680d..7a7df71bbece 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -180,7 +180,7 @@ static struct resource cmt1_resources[] = { DEFINE_RES_IRQ(gic_spi(120)), }; -#define r8a7790_register_cmt(idx) \ +#define r8a73a4_register_cmt(idx) \ platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ @@ -189,7 +189,7 @@ static struct resource cmt1_resources[] = { void __init r8a73a4_add_dt_devices(void) { - r8a7790_register_cmt(1); + r8a73a4_register_cmt(1); } /* DMA */ -- cgit v1.2.3 From dfb846c95e3a7bb14f3aa61473aa4be0a8fe02ab Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 7 Jul 2014 09:54:38 +0200 Subject: ARM: shmobile: ape6evm-reference: Initialise CMT1 device using DT Initialise CMT1 device using DT when booting ape6evm using DT-reference. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 4 ++++ arch/arm/mach-shmobile/setup-r8a73a4.c | 3 +-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index 2bcf69124a6a..84e05f713c54 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -94,6 +94,10 @@ voltage-tolerance = <1>; /* 1% */ }; +&cmt1 { + status = "okay"; +}; + &pfc { scifa0_pins: serial0 { renesas,groups = "scifa0_data"; diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 7a7df71bbece..3b7efc04e2f5 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -189,7 +189,6 @@ static struct resource cmt1_resources[] = { void __init r8a73a4_add_dt_devices(void) { - r8a73a4_register_cmt(1); } /* DMA */ @@ -282,7 +281,7 @@ static struct resource dma_resources[] = { void __init r8a73a4_add_standard_devices(void) { - r8a73a4_add_dt_devices(); + r8a73a4_register_cmt(1); r8a73a4_register_scif(0); r8a73a4_register_scif(1); r8a73a4_register_scif(2); -- cgit v1.2.3 From fd3edcbe9f7bf24b13cadca7616f8e10bbe7e2b3 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 7 Jul 2014 09:54:39 +0200 Subject: ARM: shmobile: r8a73a4: Remove empty r8a73a4_add_dt_devices r8a73a4_add_dt_devices() no longer enables any devices so remove it. Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-ape6evm-reference.c | 1 - arch/arm/mach-shmobile/r8a73a4.h | 1 - arch/arm/mach-shmobile/setup-r8a73a4.c | 4 ---- 3 files changed, 6 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c index a6503d8c77de..7c7c6f7cb0e3 100644 --- a/arch/arm/mach-shmobile/board-ape6evm-reference.c +++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c @@ -48,7 +48,6 @@ static void __init ape6evm_add_standard_devices(void) clk_put(parent); clk_put(mp); - r8a73a4_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-shmobile/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h index 5fafd6fcedf7..70dcd847a86e 100644 --- a/arch/arm/mach-shmobile/r8a73a4.h +++ b/arch/arm/mach-shmobile/r8a73a4.h @@ -11,7 +11,6 @@ enum { }; void r8a73a4_add_standard_devices(void); -void r8a73a4_add_dt_devices(void); void r8a73a4_clock_init(void); void r8a73a4_pinmux_init(void); diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 3b7efc04e2f5..179f28a2f794 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -187,10 +187,6 @@ static struct resource cmt1_resources[] = { &cmt##idx##_platform_data, \ sizeof(struct sh_timer_config)) -void __init r8a73a4_add_dt_devices(void) -{ -} - /* DMA */ static const struct sh_dmae_slave_config dma_slaves[] = { { -- cgit v1.2.3 From 11bd57b82e6802765d1a1b33405bbaff82615d65 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Fri, 24 Oct 2014 14:42:06 -0700 Subject: ARM: dts: rockchip: Add SPI DMA into rk3288.dtsi Now that SPI DMA has been fixed on rk3288 we can enable it. Signed-off-by: Doug Anderson Signed-off-by: Alexandru M Stan Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index b53e833e5667..cfc43789cac6 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -194,6 +194,8 @@ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac_peri 11>, <&dmac_peri 12>; + dma-names = "tx", "rx"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; @@ -207,6 +209,8 @@ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac_peri 13>, <&dmac_peri 14>; + dma-names = "tx", "rx"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; @@ -220,6 +224,8 @@ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac_peri 15>, <&dmac_peri 16>; + dma-names = "tx", "rx"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; -- cgit v1.2.3 From ec95a345198fc97022c98b44446c96b31d693882 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 22 Oct 2014 11:38:27 +0200 Subject: clocksource: sh_tmu: Document R-Mobile r8a7740 binding Compared to the r8a7779, the r8a7740 lacks the input capture register, which is not used by the driver (the current driver already handles the r8a7740 in the non-DT case). Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- Documentation/devicetree/bindings/timer/renesas,tmu.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index 7db89fb25444..4ae7910af09f 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt @@ -1,4 +1,4 @@ -* Renesas R-Car Timer Unit (TMU) +* Renesas R-Mobile/R-Car Timer Unit (TMU) The TMU is a 32-bit timer/counter with configurable clock inputs and programmable compare match. @@ -9,6 +9,7 @@ are independent. The TMU hardware supports up to three channels. Required Properties: - compatible: must contain one or more of the following: + - "renesas,tmu-r8a7740" for the r8a7740 TMU - "renesas,tmu-r8a7779" for the r8a7779 TMU - "renesas,tmu" for any TMU. This is a fallback for the above renesas,tmu-* entries -- cgit v1.2.3 From f9d6ec6f546a061f5b9eeb53927f1bfac5fb8278 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Oct 2014 13:31:52 +0200 Subject: clocksource: sh_tmu: Document r8a7778 binding The r8a7778 is very similar to the r8a7779, and already handled by the current driver in the non-DT case. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- Documentation/devicetree/bindings/timer/renesas,tmu.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index 4ae7910af09f..cd5f20bf2582 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt @@ -10,6 +10,7 @@ Required Properties: - compatible: must contain one or more of the following: - "renesas,tmu-r8a7740" for the r8a7740 TMU + - "renesas,tmu-r8a7778" for the r8a7778 TMU - "renesas,tmu-r8a7779" for the r8a7779 TMU - "renesas,tmu" for any TMU. This is a fallback for the above renesas,tmu-* entries -- cgit v1.2.3 From d5153cd734dd6c1243bb3dc98065be99b10d049f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Oct 2014 13:29:38 +0200 Subject: clocksource: sh_mtu2: Drop incorrect SoC family name The MTU2 hardware block is found in many Renesas SH and ARM SoCs, but not in R-Car. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- Documentation/devicetree/bindings/timer/renesas,mtu2.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt index d9a8d5af1a21..ba0a34d97eb8 100644 --- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt +++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt @@ -1,4 +1,4 @@ -* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2) +* Renesas Multi-Function Timer Pulse Unit 2 (MTU2) The MTU2 is a multi-purpose, multi-channel timer/counter with configurable clock inputs and programmable compare match. -- cgit v1.2.3 From 360a30c547f60818205a2318823cd53aa810ecad Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:37 +0200 Subject: ARM: sun6i: app4: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Boris BREZILLON --- arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 2bbf8867362b..c74a63a39531 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -3,12 +3,48 @@ * * Boris Brezillon * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 136d18a84bf516f6df2e45a6739032ba69f32746 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:23 +0200 Subject: ARM: sunxi: Fix GPLv2 wording During the GPL to GPL/X11 licensing migration, the GPL notice introduced mentionned the device trees as a library, which is not really accurate. It began to spread by copy and paste. Fix all these library mentions to reflect the file that it's actually just a file. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 6 +++--- arch/arm/boot/dts/sun6i-a31.dtsi | 6 +++--- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 6 +++--- arch/arm/boot/dts/sun7i-a20-m3.dts | 6 +++--- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 6 +++--- arch/arm/boot/dts/sun7i-a20.dtsi | 6 +++--- arch/arm/boot/dts/sun8i-a23.dtsi | 6 +++--- arch/arm/boot/dts/sun9i-a80-optimus.dts | 6 +++--- arch/arm/boot/dts/sun9i-a80.dtsi | 6 +++--- 9 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 8b3cd0907b32..eeed1f236ee8 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -6,18 +6,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 543f895d18d3..e80288e881ec 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 0e7c9f552b58..3de847db7e76 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index ce071417e029..b8e568c55271 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 187729a0b7d8..ed364d5e755e 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -6,18 +6,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f0a75c6523a1..45bb9162f5c7 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 6146ef15efbe..6086adbf9d74 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index f83abab108b9..3a70fdf8877e 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 7bcab5685d0e..af508e5af0f5 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * -- cgit v1.2.3 From 2ef6ef91c54e2dab0de112c20909ed30cd3ef1a0 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: a1000: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Emilio López Acked-by: Hans de Goede Acked-by: Olliver Schinagl Acked-by: Roman Byshko --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 46 +++++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 9e99ade35e37..3bcfd81837f0 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -3,12 +3,48 @@ * * Emilio López * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 70a2b717d0a32d4702ae45880fc1370d9ce93ec0 Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 30 Jul 2014 20:14:00 +0200 Subject: ARM: dts: berlin: add the AHCI node for the BG2Q MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The BG2Q has an AHCI SATA controller. Add the corresponding nodes (AHCI, PHY) into its device tree. Signed-off-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 891d56b03922..c96a0135f0f8 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -364,6 +364,45 @@ }; }; + ahci: sata@e90000 { + compatible = "marvell,berlin2q-ahci", "generic-ahci"; + reg = <0xe90000 0x1000>; + interrupts = ; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + status = "disabled"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + status = "disabled"; + }; + }; + + sata_phy: phy@e900a0 { + compatible = "marvell,berlin2q-sata-phy"; + reg = <0xe900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <1>; + status = "disabled"; + + sata-phy@0 { + reg = <0>; + }; + + sata-phy@1 { + reg = <1>; + }; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From e00ec0bd23ef0eea0c8f8e1b75936a9537ec1c33 Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 30 Jul 2014 20:14:01 +0200 Subject: ARM: dts: berlin: enable the eSATA interface on the BG2Q DMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The BG2Q has an AHCI SATA controller with an eSATA interface. Enable it. Only enable the first port, the BG2Q DMP does not support the second one. Signed-off-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index ea1f99b8eed6..a403b0a5ba91 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -49,3 +49,11 @@ ð0 { status = "okay"; }; + +&sata0 { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; -- cgit v1.2.3 From cdaea91019056fad4f21a697038a84606a6187cc Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 3 Sep 2014 09:48:21 +0200 Subject: Documentation: bindings: add reset bindings docs for Marvell Berlin SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the reset binding documentation to the SoC binding documentation as the reset driver in Marvell Berlin SoC is part of the chip/system control registers. This patch adds the required properties to configure the reset controller. Signed-off-by: Antoine Ténart Acked-by: Philipp Zabel Signed-off-by: Sebastian Hesselbarth --- Documentation/devicetree/bindings/arm/marvell,berlin.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 904de5781f44..a99eb9eb14c0 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -106,11 +106,21 @@ Required subnode-properties: - groups: a list of strings describing the group names. - function: a string describing the function used to mux the groups. +* Reset controller binding + +A reset controller is part of the chip control registers set. The chip control +node also provides the reset. The register set is not at the same offset between +Berlin SoCs. + +Required property: +- #reset-cells: must be set to 2 + Example: chip: chip-control@ea0000 { compatible = "marvell,berlin2-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>; clocks = <&refclk>, <&externaldev 0>; clock-names = "refclk", "video_ext0"; -- cgit v1.2.3 From 1e27a261281c8dd372e839f5a86b5a9656f192e8 Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 3 Sep 2014 09:48:23 +0200 Subject: ARM: dts: berlin: add a required reset property in the chip controller node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The chip controller node now also describes the Marvell Berlin reset controller. Add the required 'reset-cells' property. Signed-off-by: Antoine Ténart Acked-by: Philipp Zabel Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2.dtsi | 1 + arch/arm/boot/dts/berlin2cd.dtsi | 1 + arch/arm/boot/dts/berlin2q.dtsi | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 9d7c810ebd0b..d7e81e124de0 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -249,6 +249,7 @@ chip: chip-control@ea0000 { compatible = "marvell,berlin2-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>; clocks = <&refclk>; clock-names = "refclk"; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index cc1df65da504..68f7032b4686 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -231,6 +231,7 @@ chip: chip-control@ea0000 { compatible = "marvell,berlin2cd-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>; clocks = <&refclk>; clock-names = "refclk"; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index c96a0135f0f8..d38049f90c90 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -349,6 +349,7 @@ chip: chip-control@ea0000 { compatible = "marvell,berlin2q-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>, <0xdd0170 0x10>; clocks = <&refclk>; clock-names = "refclk"; -- cgit v1.2.3 From 5a37d07185fbaba3ead2a487f0238eb236f19102 Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Tue, 9 Sep 2014 16:47:49 +0200 Subject: ARM: dts: berlin: enable timer 1 for sched_clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable timer 1 to be the source for the sched_clock, allowing to have a more precise value than 1/HZ. Signed-off-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index d38049f90c90..d4416ae79e62 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -255,7 +255,6 @@ reg = <0x2c14 0x14>; clocks = <&chip CLKID_CFG>; clock-names = "timer"; - status = "disabled"; }; timer2: timer@2c28 { -- cgit v1.2.3 From 297bb063b614b801bd08f3130b780c2ff2776c47 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 20 May 2014 21:57:45 +0200 Subject: ARM: dts: berlin: Add GPIO leds to Google Chromecast With GPIO support for Marvell Berlin, now add the two gpio-connected LEDs on Google Chromecast. Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index bcd81ffc495d..0816890a5c0d 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "berlin2cd.dtsi" +#include / { model = "Google Chromecast"; @@ -24,6 +25,22 @@ device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + + white { + label = "white"; + gpios = <&portc 1 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + red { + label = "red"; + gpios = <&portc 2 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; }; &uart0 { status = "okay"; }; -- cgit v1.2.3 From ae01f64baad6299a537a1df4e5d42d94e806a582 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:49 +0200 Subject: ARM: dts: berlin: Add BG2 ethernet DT nodes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Marvell BG2 has two fast ethernet controllers with internal PHY, add the corresponding nodes to SoC dtsi. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index d7e81e124de0..bbdad9510f19 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -79,11 +79,47 @@ clocks = <&chip CLKID_TWD>; }; + eth1: ethernet@b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xb90000 0x10000>; + clocks = <&chip CLKID_GETH1>; + interrupts = ; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy1>; + status = "disabled"; + + ethphy1: ethernet-phy@0 { + reg = <0>; + }; + }; + cpu-ctrl@dd0000 { compatible = "marvell,berlin-cpu-ctrl"; reg = <0xdd0000 0x10000>; }; + eth0: ethernet@e50000 { + compatible = "marvell,pxa168-eth"; + reg = <0xe50000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = ; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy0>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From 631338af24b74b6610b5b124ac95053d7585fbe3 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:50 +0200 Subject: ARM: dts: berlin: Add BG2CD ethernet DT nodes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Marvell BG2CD has two fast ethernet controllers with internal PHY, add the corresponding nodes to SoC dtsi. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 68f7032b4686..fff23aad8205 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -66,6 +66,42 @@ clocks = <&chip CLKID_TWD>; }; + eth1: ethernet@b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xb90000 0x10000>; + clocks = <&chip CLKID_GETH1>; + interrupts = ; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy1>; + status = "disabled"; + + ethphy1: ethernet-phy@0 { + reg = <0>; + }; + }; + + eth0: ethernet@e50000 { + compatible = "marvell,pxa168-eth"; + reg = <0xe50000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = ; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy0>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From f5799dcf2c3de418e7d1a2e24728a521d2bd08dc Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 22 Oct 2014 20:26:51 +0200 Subject: ARM: dts: berlin: Add phy-connection-type to BG2Q Ethernet MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Internal FastEthernet PHY on BG2Q is connected via MII, add a corresponding phy-connection-type property to the Ethernet node. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index d4416ae79e62..a35deb37ffb5 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -123,6 +123,7 @@ local-mac-address = [00 00 00 00 00 00]; #address-cells = <1>; #size-cells = <0>; + phy-connection-type = "mii"; phy-handle = <ðphy0>; status = "disabled"; -- cgit v1.2.3 From 60daa9f71de148cbfc33187c2ce6d3dd80cf8fa0 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:52 +0200 Subject: ARM: dts: berlin: Enable ethernet on Sony NSZ-GS7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Marvell Berlin BG2 based Sony NSZ-GS7 has one ethernet controller connected to rear RJ45 jack. Enable it by default. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index c72bfd468d10..27f2f0ad7562 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -26,4 +26,6 @@ }; }; +ð1 { status = "okay"; }; + &uart0 { status = "okay"; }; -- cgit v1.2.3 From 652538c4d27df714efc4dd092e6defe87c0bbeb9 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 20 May 2014 16:48:10 +0200 Subject: ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD Marvell Berlin BG2 has three, BG2CD just one pxav3 compatible sdhci controllers, add them to the corresponding DT SoC includes. Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2.dtsi | 34 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/berlin2cd.dtsi | 9 +++++++++ 2 files changed, 43 insertions(+) diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index bbdad9510f19..20e7c394a008 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -53,6 +53,35 @@ ranges = <0 0xf7000000 0x1000000>; + sdhci0: sdhci@ab0000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0000 0x200>; + clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>; + clock-names = "io", "core"; + interrupts = ; + status = "disabled"; + }; + + sdhci1: sdhci@ab0800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0800 0x200>; + clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>; + clock-names = "io", "core"; + interrupts = ; + status = "disabled"; + }; + + sdhci2: sdhci@ab1000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab1000 0x200>; + interrupts = ; + clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clock-names = "io", "core"; + pinctrl-0 = <&emmc_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + l2: l2-cache-controller@ac0000 { compatible = "marvell,tauros3-cache", "arm,pl310-cache"; reg = <0xac0000 0x1000>; @@ -289,6 +318,11 @@ reg = <0xea0000 0x400>; clocks = <&refclk>; clock-names = "refclk"; + + emmc_pmux: emmc-pmux { + groups = "G26"; + function = "emmc"; + }; }; apb@fc0000 { diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index fff23aad8205..9e338ff80fd3 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -45,6 +45,15 @@ ranges = <0 0xf7000000 0x1000000>; + sdhci0: sdhci@ab0000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0000 0x200>; + clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>; + clock-names = "io", "core"; + interrupts = ; + status = "disabled"; + }; + l2: l2-cache-controller@ac0000 { compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; -- cgit v1.2.3 From acbcadc8505a56e7491a9944b4447e5857c6eb15 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 20 May 2014 20:30:30 +0200 Subject: ARM: dts: berlin: Enable WiFi on Google Chromecast With SDHCI for BG2CD, we can now enable the port and allow to access AzureWave WiFi/BT module on Google Chromecast. Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 0816890a5c0d..bdcaff7c321e 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -43,4 +43,13 @@ }; }; +/* + * AzureWave AW-NH387 (Marvell 88W8787) + * 802.11b/g/n + Bluetooth 2.1 + */ +&sdhci0 { + non-removable; + status = "okay"; +}; + &uart0 { status = "okay"; }; -- cgit v1.2.3 From e4fdc8e5821d852a933963ba56b9b2fa8f68c68f Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 28 Aug 2014 21:42:39 +0200 Subject: ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7 With SDHCI for BG2, we can now enable the port and allow to access Samsung M8G2FA 8GB eMMC on Sony NSZ-GS7. Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 27f2f0ad7562..04f391b5c124 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -28,4 +28,11 @@ ð1 { status = "okay"; }; +/* Samsung M8G2FA 8GB eMMC */ +&sdhci2 { + non-removable; + bus-width = <8>; + status = "okay"; +}; + &uart0 { status = "okay"; }; -- cgit v1.2.3 From 9a894953a97b5215fb602f1c5b541ae0192c70a7 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 29 Oct 2014 17:16:47 -0700 Subject: ARM: dts: Fix bootloader version dependencies by muxing n900 smc91x pins Apparently some versions of nolo don't mux the all the necessary GPMC pins for the smc91x probe to work properly. Let's fix this issue by adding mux support for GPMC to the kernel. Note that GPMC clk needs input enabled for OnenNAND to work. Cc: Kevin Hilman Cc: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 739fcf29c643..644d9f493c46 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -142,6 +142,33 @@ >; }; + gpmc_pins: pinmux_gpmc_pins { + pinctrl-single,pins = < + + /* address lines */ + OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ + OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ + + /* data lines, gpmc_d0..d7 not muxable according to TRM */ + OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ + OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ + OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ + OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ + + /* + * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable + * according to TRM. OneNAND seems to require PIN_INPUT on clock. + */ + OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ @@ -588,6 +615,8 @@ ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ + pinctrl-names = "default"; + pinctrl-0 = <&gpmc_pins>; /* gpio-irq for dma: 65 */ -- cgit v1.2.3 From 3ab84ee95ba4e28b30fd8ec7c38f5e9f72c4b4b7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 12 Sep 2014 15:15:20 +0200 Subject: ARM: shmobile: r8a7740 dtsi: Add missing INTCA clock for irqpin module This clock drives the INTCA irqpin controller modules. Before, it was assumed enabled by the bootloader or reset state. Signed-off-by: Geert Uytterhoeven Cc: devicetree@vger.kernel.org Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 14 ++++++++++---- include/dt-bindings/clock/r8a7740-clock.h | 1 + 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index d46c213a17ad..502483f4dccb 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -71,6 +71,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; /* irqpin1: IRQ8 - IRQ15 */ @@ -91,6 +92,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; /* irqpin2: IRQ16 - IRQ23 */ @@ -111,6 +113,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; /* irqpin3: IRQ24 - IRQ31 */ @@ -131,6 +134,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; }; ether: ethernet@e9a00000 { @@ -448,8 +452,8 @@ mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xe6150138 4>, <0xe6150040 4>; - clocks = <&sub_clk>, <&sub_clk>, - <&cpg_clocks R8A7740_CLK_HP>, + clocks = <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>, + <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>, @@ -458,7 +462,8 @@ <&sub_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7 + R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA + R8A7740_CLK_SCIFA7 R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2 R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB @@ -467,7 +472,8 @@ R8A7740_CLK_SCIFA4 >; clock-output-names = - "scifa6", "scifa7", "dmac1", "dmac2", "dmac3", + "scifa6", "intca", + "scifa7", "dmac1", "dmac2", "dmac3", "usbdmac", "scifa5", "scifb", "scifa0", "scifa1", "scifa2", "scifa3", "scifa4"; }; diff --git a/include/dt-bindings/clock/r8a7740-clock.h b/include/dt-bindings/clock/r8a7740-clock.h index f6b4b0fe7a43..476135da0f23 100644 --- a/include/dt-bindings/clock/r8a7740-clock.h +++ b/include/dt-bindings/clock/r8a7740-clock.h @@ -40,6 +40,7 @@ /* MSTP2 */ #define R8A7740_CLK_SCIFA6 30 +#define R8A7740_CLK_INTCA 29 #define R8A7740_CLK_SCIFA7 22 #define R8A7740_CLK_DMAC1 18 #define R8A7740_CLK_DMAC2 17 -- cgit v1.2.3 From e089f6578ff96243e31ad6257d7c9f4c8a447107 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 27 Sep 2014 01:00:20 +0400 Subject: ARM: shmobile: r8a7790: add USB PHY DT support Define the R8A7790 generic part of the USB PHY device node. It is up to the board file to enable the device. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index b7c59b7b06b0..12fb3fca2b9f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -568,6 +568,25 @@ status = "disabled"; }; + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7790"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clock-names = "usbhs"; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7790"; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; -- cgit v1.2.3 From 6742cafb6fe84f00f096b206372b48f14eb56946 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 27 Sep 2014 01:01:35 +0400 Subject: ARM: shmobile: lager: enable USB PHY Enable USB PHY device for the Lager board. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index acab2e153382..cd530de4336c 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -472,6 +472,10 @@ pinctrl-names = "default"; }; +&usbphy { + status = "okay"; +}; + /* composite video input */ &vin1 { pinctrl-0 = <&vin1_pins>; -- cgit v1.2.3 From 3b7e530d28db276b596251bbd435a058e27810f1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 27 Sep 2014 01:08:12 +0400 Subject: ARM: shmobile: r8a7791: add USB PHY DT support Define the R8A7791 generic part of the USB PHY device node. It is up to the board file to enable the device. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e4a7170f368b..49f6b9925a89 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -613,6 +613,25 @@ status = "disabled"; }; + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7791"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + clock-names = "usbhs"; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7791"; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; -- cgit v1.2.3 From dc80d8bcac7c2eb0421b19cb7c2e297fbaf76da7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 27 Sep 2014 01:09:22 +0400 Subject: ARM: shmobile: koelsch: enable USB PHY Enable USB PHY device for the Koelsch board. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 5e4d833ae491..0402c498b05b 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -474,6 +474,10 @@ pinctrl-names = "default"; }; +&usbphy { + status = "okay"; +}; + &pcie_bus_clk { status = "okay"; }; -- cgit v1.2.3 From fa03f6b243cb29698fe6a2687ac1d8fa9d4da2b8 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 27 Sep 2014 01:10:46 +0400 Subject: ARM: shmobile: henninger: enable USB PHY Enable USB PHY device for the Henninger board. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 0868899882e3..ef2cb9217aef 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -272,6 +272,10 @@ pinctrl-names = "default"; }; +&usbphy { + status = "okay"; +}; + &pcie_bus_clk { status = "okay"; }; -- cgit v1.2.3 From 538c40e52df32285aa9440995c7345ea1c4d83b4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 29 Sep 2014 22:21:59 +0400 Subject: ARM: shmobile: r8a7790: link PCI USB devices to USB PHY Describe the PCI USB devices that are behind the PCI bridges, adding necessary links to the USB PHY device. Based on the original work by Ben Dooks . Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 12fb3fca2b9f..7b42b256fe59 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1197,6 +1197,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; }; pci1: pci@ee0b0000 { @@ -1237,6 +1251,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; }; pciec: pcie@fe000000 { -- cgit v1.2.3 From e1bce1249d15b27c56790ab0ecea4a49dcd0e081 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 29 Sep 2014 22:23:11 +0400 Subject: ARM: shmobile: r8a7791: link PCI USB devices to USB PHY Describe the PCI USB devices that are behind the PCI bridges, adding necessary links to the USB PHY device. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 49f6b9925a89..1c58ce0a488a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1194,6 +1194,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; }; pci1: pci@ee0d0000 { @@ -1214,6 +1228,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; }; pciec: pcie@fe000000 { -- cgit v1.2.3 From 7c05589413fa9902f2843e91845d6084f6f8e2cd Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 16 Sep 2014 18:10:37 +0200 Subject: ARM: shmobile: r8a7790: switch from scif to scifa SCIF and SCIFA can be plexed onto the same wires on Lager board. The datasheet also describes the wires as SCIFA. So, to make use of the bigger FIFOs switch to SCIFA instead. Signed-off-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index cd530de4336c..e96f95216437 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -19,8 +19,8 @@ compatible = "renesas,lager", "renesas,r8a7790"; aliases { - serial6 = &scif0; - serial7 = &scif1; + serial6 = &scifa0; + serial7 = &scifa1; }; chosen { @@ -207,9 +207,9 @@ renesas,function = "du"; }; - scif0_pins: serial0 { - renesas,groups = "scif0_data"; - renesas,function = "scif0"; + scifa0_pins: serial0 { + renesas,groups = "scifa0_data"; + renesas,function = "scifa0"; }; ether_pins: ether { @@ -222,9 +222,9 @@ renesas,function = "intc"; }; - scif1_pins: serial1 { - renesas,groups = "scif1_data"; - renesas,function = "scif1"; + scifa1_pins: serial1 { + renesas,groups = "scifa1_data"; + renesas,function = "scifa1"; }; sdhi0_pins: sd0 { @@ -356,15 +356,15 @@ }; }; -&scif0 { - pinctrl-0 = <&scif0_pins>; +&scifa0 { + pinctrl-0 = <&scifa0_pins>; pinctrl-names = "default"; status = "okay"; }; -&scif1 { - pinctrl-0 = <&scif1_pins>; +&scifa1 { + pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; status = "okay"; -- cgit v1.2.3 From b345aee4d7c2387f2e36cdeb64e0f4dce34598f3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 2 Oct 2014 20:42:29 +0200 Subject: ARM: shmobile: r8a7740 dtsi: Fix clock index for scifa2 The clocks property for the scifa2 device node referred to the scifa0 clock index instead of the scifa2 clock index. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 502483f4dccb..559bd39e778b 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -197,7 +197,7 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c60000 0x100>; interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; clock-names = "sci_ick"; status = "disabled"; }; -- cgit v1.2.3 From 2284ff5f3f7d58e33812f4387c2ac8a09428e4cf Mon Sep 17 00:00:00 2001 From: Kouei Abe Date: Tue, 14 Oct 2014 16:01:40 +0900 Subject: ARM: shmobile: r8a7790: Add RGX clock to device tree Signed-off-by: Kouei Abe Signed-off-by: Yoshihiro Kaneko Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 9 +++++---- include/dt-bindings/clock/r8a7790-clock.h | 1 + 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7b42b256fe59..602a46ab985d 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -977,18 +977,19 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 + R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_3DG + R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = - "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", - "vsp1-du0", "vsp1-rt", "vsp1-sy"; + "jpu", "tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0", + "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 8ea7ab0346ad..14a3f12d13cd 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -28,6 +28,7 @@ /* MSTP1 */ #define R8A7790_CLK_JPU 6 #define R8A7790_CLK_TMU1 11 +#define R8A7790_CLK_3DG 12 #define R8A7790_CLK_TMU3 21 #define R8A7790_CLK_TMU2 22 #define R8A7790_CLK_CMT0 24 -- cgit v1.2.3 From e4d2fd9eb43d12e9b6a7ab842bf6986b4dd75a1d Mon Sep 17 00:00:00 2001 From: Kouei Abe Date: Tue, 14 Oct 2014 16:01:41 +0900 Subject: ARM: shmobile: r8a7791: Add SGX clock to device tree Signed-off-by: Kouei Abe Signed-off-by: Yoshihiro Kaneko Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 11 ++++++----- include/dt-bindings/clock/r8a7791-clock.h | 1 + 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 1c58ce0a488a..98c1b8bef61f 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for the r8a7791 SoC * - * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013-2014 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. * @@ -977,17 +977,18 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 + R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_3DG + R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = - "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", - "vsp1-du0", "vsp1-sy"; + "jpu", "tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0", + "vsp1-du1", "vsp1-du0", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index 58c3f49d068c..9570b7c2eedc 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -27,6 +27,7 @@ /* MSTP1 */ #define R8A7791_CLK_JPU 6 #define R8A7791_CLK_TMU1 11 +#define R8A7791_CLK_3DG 12 #define R8A7791_CLK_TMU3 21 #define R8A7791_CLK_TMU2 22 #define R8A7791_CLK_CMT0 24 -- cgit v1.2.3 From 4ba8f2468ce346642b4ace3cdf4bdd8d29175011 Mon Sep 17 00:00:00 2001 From: Yoshifumi Hosoya Date: Tue, 14 Oct 2014 16:01:42 +0900 Subject: ARM: shmobile: r8a7790: Add MMP clock to device tree Signed-off-by: Yoshifumi Hosoya Signed-off-by: Yoshihiro Kaneko Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 22 ++++++++++++++-------- include/dt-bindings/clock/r8a7790-clock.h | 11 ++++++++++- 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 602a46ab985d..050e60890d7f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -977,18 +977,24 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, - <&zs_clk>; + clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>, + <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>, + <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_3DG - R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 - R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S + R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1 + R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1 + R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC + R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0 + R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 + R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 + R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = - "jpu", "tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0", + "vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1", + "tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1", + "fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 14a3f12d13cd..e3a3fb80feb6 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -26,9 +26,18 @@ #define R8A7790_CLK_MSIOF0 0 /* MSTP1 */ -#define R8A7790_CLK_JPU 6 +#define R8A7790_CLK_VCP1 0 +#define R8A7790_CLK_VCP0 1 +#define R8A7790_CLK_VPC1 2 +#define R8A7790_CLK_VPC0 3 +#define R8A7790_CLK_JPU 6 +#define R8A7790_CLK_SSP1 9 #define R8A7790_CLK_TMU1 11 #define R8A7790_CLK_3DG 12 +#define R8A7790_CLK_2DDMAC 15 +#define R8A7790_CLK_FDP1_2 17 +#define R8A7790_CLK_FDP1_1 18 +#define R8A7790_CLK_FDP1_0 19 #define R8A7790_CLK_TMU3 21 #define R8A7790_CLK_TMU2 22 #define R8A7790_CLK_CMT0 24 -- cgit v1.2.3 From 74d89d25f6b0d84f7cd2fc09dc708177787c1465 Mon Sep 17 00:00:00 2001 From: Yoshifumi Hosoya Date: Tue, 14 Oct 2014 16:01:43 +0900 Subject: ARM: shmobile: r8a7791: Add MMP clock to device tree Signed-off-by: Yoshifumi Hosoya Signed-off-by: Yoshihiro Kaneko Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 21 +++++++++++++-------- include/dt-bindings/clock/r8a7791-clock.h | 8 +++++++- 2 files changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 98c1b8bef61f..6ce78193985d 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -977,18 +977,23 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; + clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>, + <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_3DG - R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 - R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S + R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU + R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG + R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0 + R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 + R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 + R8A7791_CLK_VSP1_S >; clock-output-names = - "jpu", "tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0", - "vsp1-du1", "vsp1-du0", "vsp1-sy"; + "vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg", + "2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0", + "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index 9570b7c2eedc..dcececd9f4d0 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -25,9 +25,15 @@ #define R8A7791_CLK_MSIOF0 0 /* MSTP1 */ -#define R8A7791_CLK_JPU 6 +#define R8A7791_CLK_VCP0 1 +#define R8A7791_CLK_VPC0 3 +#define R8A7791_CLK_JPU 6 +#define R8A7791_CLK_SSP1 9 #define R8A7791_CLK_TMU1 11 #define R8A7791_CLK_3DG 12 +#define R8A7791_CLK_2DDMAC 15 +#define R8A7791_CLK_FDP1_1 18 +#define R8A7791_CLK_FDP1_0 19 #define R8A7791_CLK_TMU3 21 #define R8A7791_CLK_TMU2 22 #define R8A7791_CLK_CMT0 24 -- cgit v1.2.3 From 600363334de89169a8dbbb1db874777d46fc239e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 22 Oct 2014 11:38:28 +0200 Subject: ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 559bd39e778b..aec8da89ef9a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -335,6 +335,34 @@ status = "disabled"; }; + tmu0: timer@fff80000 { + compatible = "renesas,tmu-r8a7740", "renesas,tmu"; + reg = <0xfff80000 0x2c>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>, + <0 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_TMU0>; + clock-names = "fck"; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu1: timer@fff90000 { + compatible = "renesas,tmu-r8a7740", "renesas,tmu"; + reg = <0xfff90000 0x2c>; + interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>, + <0 171 IRQ_TYPE_LEVEL_HIGH>, + <0 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_TMU1>; + clock-names = "fck"; + + #renesas,channels = <3>; + + status = "disabled"; + }; + clocks { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From df211020718a7cbad0a8018c924ba7dd002f7282 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 22 Oct 2014 11:38:29 +0200 Subject: ARM: shmobile: armadillo800eva dts: Enable TMU0 ch0 will be used for clock events and for periodic clock events, ch1 will be used as clock source. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2703428557fc..98504e0b06c8 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -299,3 +299,7 @@ status = "okay"; }; + +&tmu0 { + status = "okay"; +}; -- cgit v1.2.3 From 2109b5a28d27a593ab5afa7179fbef2f6a7cabcd Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 7 Jul 2014 09:54:30 +0200 Subject: ARM: shmobile: r8a7778: Add TMU nodes This describes all of the TMU hardware of the r8a7778. Each node is disabled and may be enabled as necessary by board DTS files. Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 315ec62cb96b..1e80e4c69482 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -162,6 +162,42 @@ status = "disabled"; }; + tmu0: timer@ffd80000 { + compatible = "renesas,tmu"; + reg = <0xffd80000 0x30>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu1: timer@ffd81000 { + compatible = "renesas,tmu"; + reg = <0xffd81000 0x30>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 IRQ_TYPE_LEVEL_HIGH>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu2: timer@ffd82000 { + compatible = "renesas,tmu"; + reg = <0xffd82000 0x30>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, + <0 41 IRQ_TYPE_LEVEL_HIGH>, + <0 42 IRQ_TYPE_LEVEL_HIGH>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe40000 0x100>; -- cgit v1.2.3 From 18b27aeb5591588de35628bf1e423abf24fe9695 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 7 Jul 2014 09:54:31 +0200 Subject: ARM: shmobile: bockw-reference: Initialise TMU device using DT Initialise TMU device using DT when booting bockw using DT-reference. Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778-bockw-reference.dts | 4 ++++ arch/arm/mach-shmobile/setup-r8a7778.c | 3 +-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index fba294905ff4..04c0c37bb784 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -74,6 +74,10 @@ status = "okay"; }; +&tmu0 { + status = "okay"; +}; + &pfc { scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 8ec784fc6b26..7c7223de1e9c 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -288,8 +288,6 @@ void __init r8a7778_add_dt_devices(void) l2x0_init(base, 0x00400000, 0xc20f0fff); } #endif - - r8a7778_register_tmu(0); } /* HPB-DMA */ @@ -497,6 +495,7 @@ static void __init r8a7778_register_hpb_dmae(void) void __init r8a7778_add_standard_devices(void) { r8a7778_add_dt_devices(); + r8a7778_register_tmu(0); r8a7778_register_scif(0); r8a7778_register_scif(1); r8a7778_register_scif(2); -- cgit v1.2.3 From da33648c4296a8590fbeafd7c1ae4494dfe8b04c Mon Sep 17 00:00:00 2001 From: Hisashi Nakamura Date: Fri, 12 Sep 2014 10:52:06 +0200 Subject: ARM: shmobile: r8a7794: Add arch_timer to device tree Signed-off-by: Hisashi Nakamura Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index d4e8bce1e0b7..088e79c6551c 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -82,6 +82,14 @@ status = "disabled"; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + irqc0: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7794", "renesas,irqc"; #interrupt-cells = <2>; -- cgit v1.2.3 From 157fcd8a3e6fb46ad99b615838afe16e8fcebd61 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:41:46 +0900 Subject: ARM: shmobile: r8a7790: add USB3.0 device node Signed-off-by: Yoshihiro Shimoda Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 050e60890d7f..ad5df808900c 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1186,6 +1186,16 @@ status = "disabled"; }; + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7790"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + pci0: pci@ee090000 { compatible = "renesas,pci-r8a7790"; device_type = "pci"; -- cgit v1.2.3 From 37f7c1b0c1ed9465b2e2609ba57bba8a874ddd3c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:41:47 +0900 Subject: ARM: shmobile: lager: enable USB3.0 Since the PHY of USB3.0 and EHCI/OHCI ch2 are the same, the USB3.0 driver cannot use the phy driver when the EHCI/OHCI ch2 already used it: phy phy-e6590100.usb-phy.3: phy init failed --> -16 xhci-hcd: probe of ee000000.usb failed with error -16 If so, we have to unbind the EHCI/OHCI ch2, and then we have to bind the USB3.0 driver as the following: echo 0000:02:02.0 > /sys/bus/pci/drivers/ehci-pci/unbind echo 0000:02:01.0 > /sys/bus/pci/drivers/ohci-pci/unbind echo ee000000.usb > /sys/bus/platform/drivers/xhci-hcd/bind Note that there will be pinctrl-related error messages if both internal PCI and USB3.0 are enabled but they should be just ignored: sh-pfc e6060000.pfc: pin GP_5_22 already requested by ee0d0000.pci; cannot claim for ee000000.usb sh-pfc e6060000.pfc: pin-182 (ee000000.usb) status -22 ata1: SATA link down (SStatus 0 SControl 300) sh-pfc e6060000.pfc: could not request pin 182 (GP_5_22) from group usb2 on device sh-pfc Signed-off-by: Yoshihiro Shimoda Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index e96f95216437..d869f2a6826a 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -466,6 +466,12 @@ pinctrl-names = "default"; }; +&xhci { + status = "okay"; + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; +}; + &pci2 { status = "okay"; pinctrl-0 = <&usb2_pins>; -- cgit v1.2.3 From c196931ece017a0aeeef4ee6d4fbb5adeb7dfd0a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:43:02 +0900 Subject: ARM: shmobile: r8a7791: add USB3.0 device node Signed-off-by: Yoshihiro Shimoda Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6ce78193985d..d55335edbb23 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1182,6 +1182,16 @@ status = "disabled"; }; + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7791"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + pci0: pci@ee090000 { compatible = "renesas,pci-r8a7791"; device_type = "pci"; -- cgit v1.2.3 From ae0a555b68ae4feef07e919b22ef2e0b792616ee Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:44:33 +0900 Subject: ARM: shmobile: r8a7790: add HS-USB device node Define the R8A7790 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Yoshihiro Shimoda [Sergei: fixed summary, added changelog] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index ad5df808900c..a2f2c7f71b68 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -568,6 +568,17 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7790"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy: usb-phy@e6590100 { compatible = "renesas,usb-phy-r8a7790"; reg = <0 0xe6590100 0 0x100>; -- cgit v1.2.3 From e03074a7b5fdd2834a9fbbe77bc52a1ddb0d017f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:44:34 +0900 Subject: ARM: shmobile: lager: enable HS-USB Enable HS-USB device for the Lager board, defining the GPIO that the driver should check when probing. Since this board doesn't have the OTG ID pin, we assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is in position 2-3 (meaning USB function) and 0 in other positions. Note that there will be pinctrl-related error messages if both internal PCI and HS-USB drivers are enabled but they should be just ignored. Signed-off-by: Yoshihiro Shimoda [Sergei: added pin node and prop, moved device node, fixed summary, supplemented changelog] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index d869f2a6826a..830f2e87df49 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -268,6 +268,11 @@ renesas,function = "iic3"; }; + hsusb_pins: hsusb { + renesas,groups = "usb0_ovc_vbus"; + renesas,function = "usb0"; + }; + usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -478,6 +483,13 @@ pinctrl-names = "default"; }; +&hsusb { + status = "okay"; + pinctrl-0 = <&hsusb_pins>; + pinctrl-names = "default"; + renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; +}; + &usbphy { status = "okay"; }; -- cgit v1.2.3 From 1c1fee7cbba99023a11d4d2991b56c99a3174bd4 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:45:06 +0900 Subject: ARM: shmobile: r8a7791: add HS-USB device node Define the R8A7791 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Yoshihiro Shimoda [Sergei: fixed summary, added changelog] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index d55335edbb23..c81531314414 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -613,6 +613,17 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7791"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy: usb-phy@e6590100 { compatible = "renesas,usb-phy-r8a7791"; reg = <0 0xe6590100 0 0x100>; -- cgit v1.2.3 From fc4a00b78c7f8a770b9608164c0c9cdd0e4e68c2 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:45:07 +0900 Subject: ARM: shmobile: koelsch: enable HS-USB Enable HS-USB device for the Koelsch board, defining the GPIO that the driver should check when probing (which is the ID output from MAX3355 OTG chip). Note that there will be pinctrl-related error messages if both internal PCI and HS-USB drivers are enabled but they should be just ignored. Signed-off-by: Yoshihiro Shimoda [Sergei: added pin function/group and prop, moved device node, fixed summary, added changelog] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0402c498b05b..191f32bc43ea 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -474,6 +474,13 @@ pinctrl-names = "default"; }; +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; +}; + &usbphy { status = "okay"; }; -- cgit v1.2.3 From 6f4f7156e0e6b215fad118abf4830177528ef7ad Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 24 Oct 2014 19:45:08 +0900 Subject: ARM: shmobile: henninger: enable HS-USB Enable HS-USB device for the Henninger board, defining the GPIO that the driver should check when probing (which is the ID output from MAX3355 OTG chip). Note that there will be pinctrl-related error messages if both internal PCI and HS-USB drivers are enabled but they should be just ignored. Signed-off-by: Yoshihiro Shimoda [Sergei: added pin function/group and prop, moved device node, fixed summary, added changelog] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index ef2cb9217aef..740e38678032 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -272,6 +272,13 @@ pinctrl-names = "default"; }; +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; +}; + &usbphy { status = "okay"; }; -- cgit v1.2.3 From 2cd823fc01d61e09f50d64624ec53da090ced742 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Oct 2014 13:36:02 +0200 Subject: ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property The CMT1 timer used the generic compatible property only. Add the SoC-specific one, which is already documented, to make it future proof. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 80939671b034..b5ead845c6c3 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -114,7 +114,7 @@ }; cmt1: timer@e6130000 { - compatible = "renesas,cmt-48-gen2"; + compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From 45b439c1aae45d344c55864f81d52ef90ce4d8f8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Oct 2014 13:36:03 +0200 Subject: ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property The TMU timers used the generic compatible property only. Add the SoC-specific one, to make it future proof. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 1e80e4c69482..96297f67fda8 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -163,7 +163,7 @@ }; tmu0: timer@ffd80000 { - compatible = "renesas,tmu"; + compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd80000 0x30>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>, @@ -175,7 +175,7 @@ }; tmu1: timer@ffd81000 { - compatible = "renesas,tmu"; + compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd81000 0x30>; interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, <0 37 IRQ_TYPE_LEVEL_HIGH>, @@ -187,7 +187,7 @@ }; tmu2: timer@ffd82000 { - compatible = "renesas,tmu"; + compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd82000 0x30>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, <0 41 IRQ_TYPE_LEVEL_HIGH>, -- cgit v1.2.3 From 22c2b78d3131cd161599be7a9f320523969b23c4 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 26 Oct 2014 19:40:11 +0200 Subject: ARM: shmobile: r8a7790: Rename mmcif node to mmc Node names should describe the function of the device, not its IP core name. Signed-off-by: Laurent Pinchart Tested-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index a2f2c7f71b68..63922a136313 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -392,7 +392,7 @@ status = "disabled"; }; - mmcif0: mmcif@ee200000 { + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From 8edae499162c30af16f0b8a77d394c19791ae372 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 26 Oct 2014 19:40:12 +0200 Subject: ARM: shmobile: r8a7791: Add MMCIF0 DT node Add the MMCIF0 device to the r8a7791 device tree. Signed-off-by: Laurent Pinchart Tested-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index c81531314414..8459fe698008 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -400,6 +400,15 @@ #gpio-range-cells = <3>; }; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; + reg-io-width = <4>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x200>; -- cgit v1.2.3 From 108216c1e08db6c69a54ba7ee593335eceea2077 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 26 Oct 2014 19:40:13 +0200 Subject: ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes Add references to the transmit and receive DMA channels in the two MMCIF nodes. Signed-off-by: Laurent Pinchart Acked-by: Geert Uytterhoeven Tested-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 63922a136313..52c21569e352 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -397,6 +397,8 @@ reg = <0 0xee200000 0 0x80>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; }; @@ -406,6 +408,8 @@ reg = <0 0xee220000 0 0x80>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; + dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; + dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; }; -- cgit v1.2.3 From 16b355b4aa234f4358c288e931e4cdefbbcfc4b0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 26 Oct 2014 19:40:14 +0200 Subject: ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node Add references to the transmit and receive DMA channels in the MMCIF node. Signed-off-by: Laurent Pinchart Acked-by: Geert Uytterhoeven Tested-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 8459fe698008..a862243f0436 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -405,6 +405,8 @@ reg = <0 0xee200000 0 0x80>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; }; -- cgit v1.2.3 From 25af9c83151822eb6d413b4d15d5f89804606ac7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 29 Oct 2014 14:58:51 +0100 Subject: ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property The SATA node used the generic compatible property only, which was deprecated by commit e67adb4e669db834 ("sata_rcar: Add R-Car Gen2 SATA PHY support"). Add the SoC-specific one introduced by that commit. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index fda814ed191d..a8845328827a 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -303,7 +303,7 @@ }; sata: sata@fc600000 { - compatible = "renesas,rcar-sata"; + compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; -- cgit v1.2.3 From a9ad9a47485a979397a2546d0ad5b9cf455e8857 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 29 Oct 2014 15:09:37 +0100 Subject: ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options As of commit b3a5d4ce65162d27 ("mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7778), the driver takes care of r8a7778 specific MMC options. Hence they can be removed from the dtsi. Signed-off-by: Kuninori Morimoto [geert: Rebased, reworded, added reference] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778.dtsi | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 315ec62cb96b..99eeec2fa8a8 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -215,8 +215,6 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; - cap-sd-highspeed; - cap-sdio-irq; status = "disabled"; }; @@ -224,8 +222,6 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; - cap-sd-highspeed; - cap-sdio-irq; status = "disabled"; }; @@ -233,8 +229,6 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - cap-sd-highspeed; - cap-sdio-irq; status = "disabled"; }; -- cgit v1.2.3 From 92e044aed5aede573ffa1ba2c99212024356e851 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 29 Oct 2014 15:09:38 +0100 Subject: ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options As of commit 81bbbc7278fa109f ("mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7779"), the driver takes care of r8a7779 specific MMC options. Hence they can be removed from the dtsi. Signed-off-by: Kuninori Morimoto [geert: Rebased, reworded, added reference] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779.dtsi | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 7cfba9aa1b41..ad83e47ae199 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -314,8 +314,6 @@ reg = <0xffe4c000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; - cap-sd-highspeed; - cap-sdio-irq; status = "disabled"; }; @@ -324,8 +322,6 @@ reg = <0xffe4d000 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; - cap-sd-highspeed; - cap-sdio-irq; status = "disabled"; }; @@ -334,8 +330,6 @@ reg = <0xffe4e000 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; - cap-sd-highspeed; - cap-sdio-irq; status = "disabled"; }; @@ -344,8 +338,6 @@ reg = <0xffe4f000 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; - cap-sd-highspeed; - cap-sdio-irq; status = "disabled"; }; -- cgit v1.2.3 From a6190fd042c19e1abd0b7225e75929e5005587c9 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 29 Oct 2014 15:09:39 +0100 Subject: ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options As of commit 423f6c2e977de73b ("mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7790"), the driver takes care of r8a7790 specific MMC options. Hence they can be removed from the dtsi. Signed-off-by: Kuninori Morimoto [geert: Rebased, reworded, added reference] Signed-off-by: Geert Uytterhoeven [simon: Rebased] Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index d0e17733dc1a..2be91222d402 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -420,7 +420,6 @@ reg = <0 0xee100000 0 0x200>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; - cap-sd-highspeed; status = "disabled"; }; @@ -429,7 +428,6 @@ reg = <0 0xee120000 0 0x200>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; - cap-sd-highspeed; status = "disabled"; }; @@ -438,7 +436,6 @@ reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; - cap-sd-highspeed; status = "disabled"; }; @@ -447,7 +444,6 @@ reg = <0 0xee160000 0 0x100>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; - cap-sd-highspeed; status = "disabled"; }; -- cgit v1.2.3 From 83b4fb6d9034b989075b4887d86b80bd41884d85 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 29 Oct 2014 15:30:51 +0100 Subject: ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2be91222d402..77b7f767d16c 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1151,7 +1151,7 @@ status = "disabled"; }; - rcar_sound: rcar_sound@0xec500000 { + rcar_sound: rcar_sound@ec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; reg = <0 0xec500000 0 0x1000>, /* SCU */ -- cgit v1.2.3 From 6b83dc1d03348ec1b1c6879515de1216e060005c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 29 Oct 2014 15:30:52 +0100 Subject: ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e06c11fa8698..35b8a7505a3b 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1153,7 +1153,7 @@ status = "disabled"; }; - rcar_sound: rcar_sound@0xec500000 { + rcar_sound: rcar_sound@ec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; reg = <0 0xec500000 0 0x1000>, /* SCU */ -- cgit v1.2.3 From 76ddbdc3010fbb6d5974545a9e91a8ac7460a243 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 29 Oct 2014 15:30:53 +0100 Subject: ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 0dac0e66ccad..8c913d9b1824 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -251,7 +251,7 @@ }; }; - ak4648: ak4648@0x12 { + ak4648: ak4648@12 { #sound-dai-cells = <0>; compatible = "asahi-kasei,ak4648"; reg = <0x12>; -- cgit v1.2.3 From e2c5eb78a3cc9b0d69ae924c33da50a4cd6d1fa4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 29 Oct 2014 17:16:47 -0700 Subject: ARM: dts: Fix wrong GPMC size mappings for omaps The GPMC binding is obviously very confusing as the values are all over the place. People seem to confuse the GPMC partition size for the chip select, and the device IO size within the GPMC partition easily. The ranges entry contains the GPMC partition size. And the reg entry contains the size of the IO registers of the device connected to the GPMC. Let's fix the issue according to the following table: Device GPMC partition size Device IO size connected in the ranges entry in the reg entry NAND 0x01000000 (16MB) 4 16550 0x01000000 (16MB) 8 smc91x 0x01000000 (16MB) 0xf smc911x 0x01000000 (16MB) 0xff OneNAND 0x01000000 (16MB) 0x20000 (128KB) 16MB NOR 0x01000000 (16MB) 0x01000000 (16MB) 32MB NOR 0x02000000 (32MB) 0x02000000 (32MB) 64MB NOR 0x04000000 (64MB) 0x04000000 (64MB) 128MB NOR 0x08000000 (128MB) 0x08000000 (128MB) 256MB NOR 0x10000000 (256MB) 0x10000000 (256MB) Let's also add comments to the fixed entries while at it. Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 4 ++-- arch/arm/boot/dts/am335x-igep0033.dtsi | 4 ++-- arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++-- arch/arm/boot/dts/omap-zoom-common.dtsi | 4 ++-- arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 4 ++-- arch/arm/boot/dts/omap3-devkit8000.dts | 4 ++-- arch/arm/boot/dts/omap3-evm-37xx.dts | 4 ++-- arch/arm/boot/dts/omap3-gta04.dtsi | 4 ++-- arch/arm/boot/dts/omap3-igep0020.dts | 4 ++-- arch/arm/boot/dts/omap3-igep0030.dts | 4 ++-- arch/arm/boot/dts/omap3-ldp.dts | 2 +- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-n900.dts | 6 ++---- arch/arm/boot/dts/omap3-n950-n9.dtsi | 4 ++-- arch/arm/boot/dts/omap3-tao3530.dtsi | 2 +- arch/arm/boot/dts/omap3430-sdp.dts | 8 ++++---- 16 files changed, 31 insertions(+), 33 deletions(-) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index e2156a583de7..43a536c08c9f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -437,9 +437,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nandflash_pins_s0>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index a1a0cc5eb35c..c0e1135256cc 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -126,10 +126,10 @@ pinctrl-names = "default"; pinctrl-0 = <&nandflash_pins>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-width = <1>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ac3e4859935f..bb4cb8554b4a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -438,9 +438,9 @@ status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index 68221fab978d..2889b504792f 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -5,7 +5,7 @@ #include "omap-gpmc-smsc911x.dtsi" &gpmc { - ranges = <3 0 0x10000000 0x00000400>, + ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */ <7 0 0x2c000000 0x01000000>; /* @@ -15,7 +15,7 @@ */ uart@3,0 { compatible = "ns16550a"; - reg = <3 0 0x100>; + reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ bank-width = <2>; reg-shift = <1>; reg-io-width = <1>; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index 24c50db2a478..c9f1e93a95ae 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -40,14 +40,14 @@ }; &gpmc { - ranges = <0 0 0x04000000 0x10000000>; + ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ /* gpio-irq for dma: 26 */ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; - reg = <0 0 0x10000000>; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; gpmc,burst-length = <16>; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index da402f0fdab4..169037e5ff53 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -106,10 +106,10 @@ }; &gpmc { - ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,sync-clk-ps = <0>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index a8bd4349c7d2..f73385bb237a 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -154,12 +154,12 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>, + ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; nand@0,0 { linux,mtd-name= "hynix,h8kds0un0mer-4em"; - reg = <0 0 0>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index fd34f913ace3..91bba857e0f9 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -397,10 +397,10 @@ }; &gpmc { - ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index b22caaaf774b..ff0b11d95e08 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -197,12 +197,12 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>, + ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; nand@0,0 { linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 0>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 2793749eb1ba..fd7ed712d506 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -55,11 +55,11 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>; + ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 0>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 72dca0b7904d..37d305aebc5b 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -101,7 +101,7 @@ nand@0,0 { linux,mtd-name= "micron,nand"; - reg = <0 0 0>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index d97308896f0c..e81fb651d5d0 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -363,7 +363,7 @@ <7 0 0x15000000 0x01000000>; nand@0,0 { - reg = <0 0 0x1000000>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; /* no elm on omap3 */ diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 644d9f493c46..99afa26c9ab6 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -612,18 +612,16 @@ }; &gpmc { - ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ pinctrl-names = "default"; pinctrl-0 = <&gpmc_pins>; - /* gpio-irq for dma: 65 */ - + /* sys_ndmareq1 could be used by the driver, not as gpio65 though */ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; - reg = <0 0 0x10000000>; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; gpmc,sync-write; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 70addcba37c5..1e49dfe7e212 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -115,12 +115,12 @@ }; &gpmc { - ranges = <0 0 0x04000000 0x20000000>; + ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; - reg = <0 0 0x20000000>; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; gpmc,sync-write; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index b30f387d3a83..e89820a6776e 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -270,7 +270,7 @@ ranges = <0 0 0x00000000 0x01000000>; nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 9bad94efe1c8..16b0cdfbee9c 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -51,8 +51,8 @@ &gpmc { ranges = <0 0 0x10000000 0x08000000>, - <1 0 0x28000000 0x08000000>, - <2 0 0x20000000 0x10000000>; + <1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */ + <2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */ nor@0,0 { compatible = "cfi-flash"; @@ -106,7 +106,7 @@ linux,mtd-name= "micron,mt29f1g08abb"; #address-cells = <1>; #size-cells = <1>; - reg = <1 0 0x08000000>; + reg = <1 0 4>; /* CS1, offset 0, IO size 4 */ ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; @@ -150,7 +150,7 @@ linux,mtd-name= "samsung,kfm2g16q2m-deb8"; #address-cells = <1>; #size-cells = <1>; - reg = <2 0 0x10000000>; + reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */ gpmc,device-width = <2>; gpmc,mux-add-data = <2>; -- cgit v1.2.3 From 43d024d36a558a37b0f47d753a45f568e525b7eb Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Oct 2014 22:41:28 +0100 Subject: ARM: sun9i: Enable the A80 pinctrl driver The A80 pinctrl driver is just as usual our pinctrl/gpio/external interrupt controller. Nothing really out of the extraordinary here... Signed-off-by: Maxime Ripard Acked-by: Linus Walleij --- arch/arm/boot/dts/sun9i-a80.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index af508e5af0f5..fe9832a2d8b8 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -337,6 +337,22 @@ clocks = <&osc24M>; }; + pio: pinctrl@06000800 { + compatible = "allwinner,sun9i-a80-pinctrl"; + reg = <0x06000800 0x400>; + interrupts = <0 11 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>, + <0 120 4>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #gpio-cells = <3>; + }; + uart0: serial@07000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; -- cgit v1.2.3 From 888366fa17841ac1feb00c693e6956a5abfecb93 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Oct 2014 22:41:29 +0100 Subject: ARM: sun9i: optimus: Set UART0 muxing Enable the UART0 muxing, as set up by the bootloader. Signed-off-by: Maxime Ripard Acked-by: Linus Walleij --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 ++ arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 3a70fdf8877e..5d9bc80afef2 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -60,6 +60,8 @@ soc { uart0: serial@07000000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index fe9832a2d8b8..da680cf195e2 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -351,6 +351,13 @@ #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@07000000 { -- cgit v1.2.3 From 1bb37404397da5f32565de6bff8b8d4793ad07c4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 29 Oct 2014 17:16:47 -0700 Subject: ARM: dts: Add smc91x GPMC configuration for 2430sdp Let's use the bootloader values except for the partially configured wait-pin that does not seem to work. Cc: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap2430-sdp.dts | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 2c90d29b4cad..05eca2e4430f 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -43,7 +43,31 @@ interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */ reg = <5 0x300 0xf>; bank-width = <2>; - gpmc,mux-add-data; - }; + gpmc,sync-clk-ps = <0>; + gpmc,mux-add-data = <2>; + gpmc,device-width = <1>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cs-on-ns = <7>; + gpmc,cs-rd-off-ns = <233>; + gpmc,cs-wr-off-ns = <233>; + gpmc,adv-on-ns = <22>; + gpmc,adv-rd-off-ns = <60>; + gpmc,adv-wr-off-ns = <60>; + gpmc,oe-on-ns = <67>; + gpmc,oe-off-ns = <210>; + gpmc,we-on-ns = <67>; + gpmc,we-off-ns = <210>; + gpmc,rd-cycle-ns = <233>; + gpmc,wr-cycle-ns = <233>; + gpmc,access-ns = <233>; + gpmc,page-burst-access-ns = <30>; + gpmc,bus-turnaround-ns = <30>; + gpmc,cycle2cycle-delay-ns = <30>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; + }; }; -- cgit v1.2.3 From b5399ea8453ac1ffe5c1515ba63afc978e242e7f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 29 Oct 2014 17:16:48 -0700 Subject: ARM: dts: Add GPMC timings for omap zoom serial port The four port serial port on the zoom debug board uses a TL16CP754C with a single interrupt and GPMC chip select. The serial ports each use a 8 bytes for IO registers, and are 256 bytes apart on the GPMC line. Let's add timings for all four ports so we can remove the GPMC workarounds for using bootloader timings. Not caused by this patch, but looks like u-boot only properly initializes the fifo on the first serial port. Currently the other ports produce garbage at least with my version of u-boot. I suspect that TL16CP754C needs non-standard initialization added to 8250 driver to properly fix this issue. Cc: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap-zoom-common.dtsi | 58 +++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index 2889b504792f..46ef3e443861 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -23,6 +23,64 @@ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ clock-frequency = <1843200>; current-speed = <115200>; + gpmc,mux-add-data = <0>; + gpmc,device-width = <1>; + gpmc,wait-pin = <1>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cs-on-ns = <5>; + gpmc,cs-rd-off-ns = <155>; + gpmc,cs-wr-off-ns = <155>; + gpmc,adv-on-ns = <15>; + gpmc,adv-rd-off-ns = <40>; + gpmc,adv-wr-off-ns = <40>; + gpmc,oe-on-ns = <45>; + gpmc,oe-off-ns = <145>; + gpmc,we-on-ns = <45>; + gpmc,we-off-ns = <145>; + gpmc,rd-cycle-ns = <155>; + gpmc,wr-cycle-ns = <155>; + gpmc,access-ns = <145>; + gpmc,page-burst-access-ns = <20>; + gpmc,bus-turnaround-ns = <20>; + gpmc,cycle2cycle-delay-ns = <20>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <45>; + gpmc,wr-access-ns = <145>; + }; + uart@3,1 { + compatible = "ns16550a"; + reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + }; + uart@3,2 { + compatible = "ns16550a"; + reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + }; + uart@3,3 { + compatible = "ns16550a"; + reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; }; ethernet@gpmc { -- cgit v1.2.3 From 7cfdaddc4d1f5e673ded29e659726a8df7f2dd39 Mon Sep 17 00:00:00 2001 From: Jonathan Richardson Date: Fri, 15 Aug 2014 13:51:50 -0700 Subject: dt-bindings: Document Broadcom Cygnus SoC and clocks Reviewed-by: Arun Parameswaran Tested-by: Jonathan Richardson Reviewed-by: JD (Jiandong) Zheng Reviewed-by: Ray Jui Signed-off-by: Scott Branden --- .../devicetree/bindings/arm/bcm/cygnus.txt | 31 ++++++++++++++++++++ .../devicetree/bindings/clock/bcm-cygnus-clock.txt | 34 ++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/cygnus.txt create mode 100644 Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt new file mode 100644 index 000000000000..4c77169bb534 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt @@ -0,0 +1,31 @@ +Broadcom Cygnus device tree bindings +------------------------------------ + + +Boards with Cygnus SoCs shall have the following properties: + +Required root node property: + +BCM11300 +compatible = "brcm,bcm11300", "brcm,cygnus"; + +BCM11320 +compatible = "brcm,bcm11320", "brcm,cygnus"; + +BCM11350 +compatible = "brcm,bcm11350", "brcm,cygnus"; + +BCM11360 +compatible = "brcm,bcm11360", "brcm,cygnus"; + +BCM58300 +compatible = "brcm,bcm58300", "brcm,cygnus"; + +BCM58302 +compatible = "brcm,bcm58302", "brcm,cygnus"; + +BCM58303 +compatible = "brcm,bcm58303", "brcm,cygnus"; + +BCM58305 +compatible = "brcm,bcm58305", "brcm,cygnus"; diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt new file mode 100644 index 000000000000..00d26edec8bc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt @@ -0,0 +1,34 @@ +Broadcom Cygnus Clocks + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +Currently various "fixed" clocks are declared for peripheral drivers that use +the common clock framework to reference their core clocks. Proper support of +these clocks will be added later + +Device tree example: + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <25000000>; + }; + + apb_clk: apb_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + }; -- cgit v1.2.3 From 8872fc22c2670cde338ab92be4a8e9ebad8e53e6 Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Tue, 14 Oct 2014 16:42:25 -0700 Subject: ARM: dts: Enable Broadcom Cygnus SoC DT files to enable cygnus consisting on reference designs and cygnus core configuration. Reviewed-by: Ray Jui Reviewed-by: Arun Parameswaran Tested-by: Jonathan Richardson Reviewed-by: JD (Jiandong) Zheng Signed-off-by: Scott Branden --- arch/arm/boot/dts/Makefile | 4 ++ arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 73 +++++++++++++++++++++++ arch/arm/boot/dts/bcm-cygnus.dtsi | 100 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 32 ++++++++++ arch/arm/boot/dts/bcm911360k.dts | 32 ++++++++++ arch/arm/boot/dts/bcm958300k.dts | 32 ++++++++++ 6 files changed, 273 insertions(+) create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts create mode 100644 arch/arm/boot/dts/bcm911360k.dts create mode 100644 arch/arm/boot/dts/bcm958300k.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..4b3a59004793 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -54,6 +54,10 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ + bcm911360_entphn.dtb \ + bcm911360k.dtb \ + bcm958300k.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi new file mode 100644 index 000000000000..d06172bfd99d --- /dev/null +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -0,0 +1,73 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <25000000>; + }; + + apb_clk: apb_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + sdio_clk: lcpll_ch2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + axi81_clk: axi81_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + keypad_clk: keypad_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <31806>; + }; + + adc_clk: adc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1562500>; + }; + + pwm_clk: pwm_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + + lcd_clk: mipipll_ch1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi new file mode 100644 index 000000000000..9c650aba372d --- /dev/null +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -0,0 +1,100 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,cygnus"; + model = "Broadcom Cygnus SoC"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + /include/ "bcm-cygnus-clock.dtsi" + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus", "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = ; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + }; + }; + + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clock-frequency = <100000000>; + clocks = <&axi81_clk>; + status = "okay"; + }; + + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "okay"; + }; + + gic: interrupt-controller@19021000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x19021000 0x1000>, + <0x19020100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x19022000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + timer@19020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x19020200 0x100>; + interrupts = ; + clocks = <&periph_clk>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts new file mode 100644 index 000000000000..9de5e87b5c9e --- /dev/null +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + serial1 = &uart0; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts new file mode 100644 index 000000000000..dd4f102f2e23 --- /dev/null +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus SVK (BCM911360K)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + serial1 = &uart0; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts new file mode 100644 index 000000000000..f8b962570221 --- /dev/null +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus SVK (BCM958300K)"; + compatible = "brcm,bcm58300", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + serial1 = &uart0; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; +}; -- cgit v1.2.3 From e4aa753a72c16dbdee88383413b4856cd7dba518 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:46 +0800 Subject: ARM: dts: sun9i: Add i2c controller nodes to a80 dtsi The A80 has 5 i2c controllers in the main processor block. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index da680cf195e2..3ec727d76d1b 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -426,6 +426,61 @@ status = "disabled"; }; + i2c0: i2c@07002800 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07002800 0x400>; + interrupts = <0 6 4>; + clocks = <&apb1_gates 0>; + resets = <&apb1_resets 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@07002c00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07002c00 0x400>; + interrupts = <0 7 4>; + clocks = <&apb1_gates 1>; + resets = <&apb1_resets 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@07003000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07003000 0x400>; + interrupts = <0 8 4>; + clocks = <&apb1_gates 2>; + resets = <&apb1_resets 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@07003400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07003400 0x400>; + interrupts = <0 9 4>; + clocks = <&apb1_gates 3>; + resets = <&apb1_resets 3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@07003800 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07003800 0x400>; + interrupts = <0 10 4>; + clocks = <&apb1_gates 4>; + resets = <&apb1_resets 4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_wdt: watchdog@08001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; -- cgit v1.2.3 From 6657a05872c2fe0e891edb2be039ad5c231ae985 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:47 +0800 Subject: ARM: dts: sun9i: Add i2c3 pinmux setting for A80 SoC i2c3 has only one possible pinmux setting on the A80 SoC. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 3ec727d76d1b..0a1f1a888308 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -352,6 +352,13 @@ #size-cells = <0>; #gpio-cells = <3>; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "i2c3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PH12", "PH13"; allwinner,function = "uart0"; -- cgit v1.2.3 From 475c6285cf38480eb39cc62b48c4c95cacd2fc15 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:48 +0800 Subject: ARM: dts: sun9i: Enable i2c3 on A80 Optimus board i2c3 is exposed on the GPIO extension header. Enable it so we can use it. Also enable internal pull-ups on the pins, as they don't seem to have external pull-up resistors. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 5d9bc80afef2..955436aa91d4 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -59,10 +59,23 @@ }; soc { + pio: pinctrl@06000800 { + i2c3_pins_a: i2c3@0 { + /* Enable internal pull-up */ + allwinner,pull = <1>; + }; + }; + uart0: serial@07000000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c3: i2c@07003400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; + }; }; }; -- cgit v1.2.3 From 0cc4539901c6b30c88042b60aae2edab61703297 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:49 +0800 Subject: ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board The A80 Optimus board has 3 usable LEDs that are controlled via GPIO. This patch adds support for 2 of them which are driver by GPIOs in the main pin controller. The remaining one uses GPIO from the R_PIO controller, which we don't support yet. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 955436aa91d4..87b1355e3cd7 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -64,6 +64,13 @@ /* Enable internal pull-up */ allwinner,pull = <1>; }; + + led_pins_optimus: led-pins@0 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@07000000 { @@ -78,4 +85,24 @@ status = "okay"; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_optimus>; + + /* The LED names match those found on the board */ + + led2 { + label = "optimus:led2:usr"; + gpios = <&pio 7 1 0>; + }; + + /* led3 is on PM15, in R_PIO */ + + led4 { + label = "optimus:led4:usr"; + gpios = <&pio 7 0 0>; + }; + }; }; -- cgit v1.2.3 From 2a950b2ca039b0e49c350b8690dcc096077ca2d3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:50 +0800 Subject: ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC uart4 only has one possible pinmux setting on the A80 SoC. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 0a1f1a888308..494714f67b57 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -365,6 +365,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + uart4_pins_a: uart4@0 { + allwinner,pins = "PG12", "PG13", "PG14", "PG15"; + allwinner,function = "uart4"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@07000000 { -- cgit v1.2.3 From fec99debbc922af2b9ff8043ab9f195415e9d447 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:51 +0800 Subject: ARM: dts: sun9i: Enable uart4 for A80 Optimus board The A80 Optimus board exposes uart4 on the GPIO expansion header. Enable it so we can use it. Also enable the internal pull-ups, as there doesn't seem to be external pull-up resistors for pins on the expansion header. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 87b1355e3cd7..506948f582ee 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -71,6 +71,11 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + uart4_pins_a: uart4@0 { + /* Enable internal pull-up */ + allwinner,pull = <1>; + }; }; uart0: serial@07000000 { @@ -79,6 +84,12 @@ status = "okay"; }; + uart4: serial@07001000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; + }; + i2c3: i2c@07003400 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins_a>; -- cgit v1.2.3 From dc62bfdfa3a5cc72d258d0856ac11b624bf5329d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 27 May 2014 14:53:00 +0200 Subject: ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase Suggested-by: Olof Johansson Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih415-pinctrl.dtsi | 340 ++++++++++++++++---------------- arch/arm/boot/dts/stih416-b2020e.dts | 6 +- arch/arm/boot/dts/stih416-pinctrl.dtsi | 342 ++++++++++++++++----------------- arch/arm/boot/dts/stih41x-b2000.dtsi | 6 +- arch/arm/boot/dts/stih41x-b2020.dtsi | 6 +- 5 files changed, 350 insertions(+), 350 deletions(-) diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 8509a037ae21..1c413013818c 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -11,33 +11,33 @@ / { aliases { - gpio0 = &PIO0; - gpio1 = &PIO1; - gpio2 = &PIO2; - gpio3 = &PIO3; - gpio4 = &PIO4; - gpio5 = &PIO5; - gpio6 = &PIO6; - gpio7 = &PIO7; - gpio8 = &PIO8; - gpio9 = &PIO9; - gpio10 = &PIO10; - gpio11 = &PIO11; - gpio12 = &PIO12; - gpio13 = &PIO13; - gpio14 = &PIO14; - gpio15 = &PIO15; - gpio16 = &PIO16; - gpio17 = &PIO17; - gpio18 = &PIO18; - gpio19 = &PIO100; - gpio20 = &PIO101; - gpio21 = &PIO102; - gpio22 = &PIO103; - gpio23 = &PIO104; - gpio24 = &PIO105; - gpio25 = &PIO106; - gpio26 = &PIO107; + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio5; + gpio6 = &pio6; + gpio7 = &pio7; + gpio8 = &pio8; + gpio9 = &pio9; + gpio10 = &pio10; + gpio11 = &pio11; + gpio12 = &pio12; + gpio13 = &pio13; + gpio14 = &pio14; + gpio15 = &pio15; + gpio16 = &pio16; + gpio17 = &pio17; + gpio18 = &pio18; + gpio19 = &pio100; + gpio20 = &pio101; + gpio21 = &pio102; + gpio22 = &pio103; + gpio23 = &pio104; + gpio24 = &pio105; + gpio25 = &pio106; + gpio26 = &pio107; }; soc { @@ -52,7 +52,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x5000>; - PIO0: gpio@fe610000 { + pio0: gpio@fe610000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -60,7 +60,7 @@ reg = <0 0x100>; st,bank-name = "PIO0"; }; - PIO1: gpio@fe611000 { + pio1: gpio@fe611000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -68,7 +68,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - PIO2: gpio@fe612000 { + pio2: gpio@fe612000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -76,7 +76,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - PIO3: gpio@fe613000 { + pio3: gpio@fe613000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -84,7 +84,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - PIO4: gpio@fe614000 { + pio4: gpio@fe614000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -96,8 +96,8 @@ sbc_serial1 { pinctrl_sbc_serial1:sbc_serial1 { st,pins { - tx = <&PIO2 6 ALT3 OUT>; - rx = <&PIO2 7 ALT3 IN>; + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; }; }; }; @@ -105,15 +105,15 @@ keyscan { pinctrl_keyscan: keyscan { st,pins { - keyin0 = <&PIO0 2 ALT2 IN>; - keyin1 = <&PIO0 3 ALT2 IN>; - keyin2 = <&PIO0 4 ALT2 IN>; - keyin3 = <&PIO2 6 ALT2 IN>; - - keyout0 = <&PIO1 6 ALT2 OUT>; - keyout1 = <&PIO1 7 ALT2 OUT>; - keyout2 = <&PIO0 6 ALT2 OUT>; - keyout3 = <&PIO2 7 ALT2 OUT>; + keyin0 = <&pio0 2 ALT2 IN>; + keyin1 = <&pio0 3 ALT2 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio1 6 ALT2 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; }; }; }; @@ -121,8 +121,8 @@ sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { - sda = <&PIO4 6 ALT1 BIDIR>; - scl = <&PIO4 5 ALT1 BIDIR>; + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; }; }; }; @@ -130,8 +130,8 @@ sbc_i2c1 { pinctrl_sbc_i2c1_default: sbc_i2c1-default { st,pins { - sda = <&PIO3 2 ALT2 BIDIR>; - scl = <&PIO3 1 ALT2 BIDIR>; + sda = <&pio3 2 ALT2 BIDIR>; + scl = <&pio3 1 ALT2 BIDIR>; }; }; }; @@ -139,7 +139,7 @@ rc{ pinctrl_ir: ir0 { st,pins { - ir = <&PIO4 0 ALT2 IN>; + ir = <&pio4 0 ALT2 IN>; }; }; }; @@ -147,49 +147,49 @@ gmac1 { pinctrl_mii1: mii1 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&PIO0 7 ALT1 IN BYPASS 1000>; - mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&PIO1 2 ALT1 IN BYPASS 1000>; - mdint = <&PIO1 3 ALT1 IN BYPASS 0>; - rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>; }; }; pinctrl_rgmii1: rgmii1-0 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>; - txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>; - - rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; + + clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; }; }; }; @@ -206,7 +206,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x8000>; - PIO5: gpio@fee00000 { + pio5: gpio@fee00000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -214,7 +214,7 @@ reg = <0 0x100>; st,bank-name = "PIO5"; }; - PIO6: gpio@fee01000 { + pio6: gpio@fee01000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -222,7 +222,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO6"; }; - PIO7: gpio@fee02000 { + pio7: gpio@fee02000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -230,7 +230,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO7"; }; - PIO8: gpio@fee03000 { + pio8: gpio@fee03000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -238,7 +238,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO8"; }; - PIO9: gpio@fee04000 { + pio9: gpio@fee04000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -246,7 +246,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO9"; }; - PIO10: gpio@fee05000 { + pio10: gpio@fee05000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -254,7 +254,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO10"; }; - PIO11: gpio@fee06000 { + pio11: gpio@fee06000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -262,7 +262,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO11"; }; - PIO12: gpio@fee07000 { + pio12: gpio@fee07000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -274,8 +274,8 @@ i2c0 { pinctrl_i2c0_default: i2c0-default { st,pins { - sda = <&PIO9 3 ALT1 BIDIR>; - scl = <&PIO9 2 ALT1 BIDIR>; + sda = <&pio9 3 ALT1 BIDIR>; + scl = <&pio9 2 ALT1 BIDIR>; }; }; }; @@ -283,8 +283,8 @@ i2c1 { pinctrl_i2c1_default: i2c1-default { st,pins { - sda = <&PIO12 1 ALT1 BIDIR>; - scl = <&PIO12 0 ALT1 BIDIR>; + sda = <&pio12 1 ALT1 BIDIR>; + scl = <&pio12 0 ALT1 BIDIR>; }; }; }; @@ -301,7 +301,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x8000>; - PIO13: gpio@fe820000 { + pio13: gpio@fe820000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -309,7 +309,7 @@ reg = <0 0x100>; st,bank-name = "PIO13"; }; - PIO14: gpio@fe821000 { + pio14: gpio@fe821000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -317,7 +317,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO14"; }; - PIO15: gpio@fe822000 { + pio15: gpio@fe822000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -325,7 +325,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO15"; }; - PIO16: gpio@fe823000 { + pio16: gpio@fe823000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -333,7 +333,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO16"; }; - PIO17: gpio@fe824000 { + pio17: gpio@fe824000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -341,7 +341,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO17"; }; - PIO18: gpio@fe825000 { + pio18: gpio@fe825000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -353,8 +353,8 @@ serial2 { pinctrl_serial2: serial2-0 { st,pins { - tx = <&PIO17 4 ALT2 OUT>; - rx = <&PIO17 5 ALT2 IN>; + tx = <&pio17 4 ALT2 OUT>; + rx = <&pio17 5 ALT2 IN>; }; }; }; @@ -362,68 +362,68 @@ gmac0{ pinctrl_mii0: mii0 { st,pins { - mdint = <&PIO13 6 ALT2 IN BYPASS 0>; - txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - - txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&PIO15 2 ALT2 IN BYPASS 1000>; - col = <&PIO15 3 ALT2 IN BYPASS 1000>; - mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>; + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>; }; }; pinctrl_gmii0: gmii0 { st,pins { - mdint = <&PIO13 6 ALT2 IN BYPASS 0>; - mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - - txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - crs = <&PIO15 2 ALT2 IN BYPASS 1000>; - col = <&PIO15 3 ALT2 IN BYPASS 1000>; - rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>; + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; + + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; }; @@ -442,7 +442,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; - PIO100: gpio@fd6b0000 { + pio100: gpio@fd6b0000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -450,7 +450,7 @@ reg = <0 0x100>; st,bank-name = "PIO100"; }; - PIO101: gpio@fd6b1000 { + pio101: gpio@fd6b1000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -458,7 +458,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO101"; }; - PIO102: gpio@fd6b2000 { + pio102: gpio@fd6b2000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -479,7 +479,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; - PIO103: gpio@fd330000 { + pio103: gpio@fd330000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -487,7 +487,7 @@ reg = <0 0x100>; st,bank-name = "PIO103"; }; - PIO104: gpio@fd331000 { + pio104: gpio@fd331000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -495,7 +495,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO104"; }; - PIO105: gpio@fd332000 { + pio105: gpio@fd332000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -503,7 +503,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO105"; }; - PIO106: gpio@fd333000 { + pio106: gpio@fd333000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -511,7 +511,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO106"; }; - PIO107: gpio@fd334000 { + pio107: gpio@fd334000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index ba0fa2caaf18..d72e5c704d5f 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -19,17 +19,17 @@ red { #gpio-cells = <1>; label = "Front Panel LED"; - gpios = <&PIO4 1>; + gpios = <&pio4 1>; linux,default-trigger = "heartbeat"; }; green { - gpios = <&PIO1 3>; + gpios = <&pio1 3>; default-state = "off"; }; }; ethernet1: dwmac@fef08000 { - snps,reset-gpio = <&PIO0 7>; + snps,reset-gpio = <&pio0 7>; }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index ee6c119e261e..787c2eeca5d5 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -12,36 +12,36 @@ / { aliases { - gpio0 = &PIO0; - gpio1 = &PIO1; - gpio2 = &PIO2; - gpio3 = &PIO3; - gpio4 = &PIO4; - gpio5 = &PIO40; - gpio6 = &PIO5; - gpio7 = &PIO6; - gpio8 = &PIO7; - gpio9 = &PIO8; - gpio10 = &PIO9; - gpio11 = &PIO10; - gpio12 = &PIO11; - gpio13 = &PIO12; - gpio14 = &PIO30; - gpio15 = &PIO31; - gpio16 = &PIO13; - gpio17 = &PIO14; - gpio18 = &PIO15; - gpio19 = &PIO16; - gpio20 = &PIO17; - gpio21 = &PIO18; - gpio22 = &PIO100; - gpio23 = &PIO101; - gpio24 = &PIO102; - gpio25 = &PIO103; - gpio26 = &PIO104; - gpio27 = &PIO105; - gpio28 = &PIO106; - gpio29 = &PIO107; + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio40; + gpio6 = &pio5; + gpio7 = &pio6; + gpio8 = &pio7; + gpio9 = &pio8; + gpio10 = &pio9; + gpio11 = &pio10; + gpio12 = &pio11; + gpio13 = &pio12; + gpio14 = &pio30; + gpio15 = &pio31; + gpio16 = &pio13; + gpio17 = &pio14; + gpio18 = &pio15; + gpio19 = &pio16; + gpio20 = &pio17; + gpio21 = &pio18; + gpio22 = &pio100; + gpio23 = &pio101; + gpio24 = &pio102; + gpio25 = &pio103; + gpio26 = &pio104; + gpio27 = &pio105; + gpio28 = &pio106; + gpio29 = &pio107; }; soc { @@ -56,7 +56,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x6000>; - PIO0: gpio@fe610000 { + pio0: gpio@fe610000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -64,7 +64,7 @@ reg = <0 0x100>; st,bank-name = "PIO0"; }; - PIO1: gpio@fe611000 { + pio1: gpio@fe611000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -72,7 +72,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - PIO2: gpio@fe612000 { + pio2: gpio@fe612000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -80,7 +80,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - PIO3: gpio@fe613000 { + pio3: gpio@fe613000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -88,7 +88,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - PIO4: gpio@fe614000 { + pio4: gpio@fe614000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -96,7 +96,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO4"; }; - PIO40: gpio@fe615000 { + pio40: gpio@fe615000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -109,15 +109,15 @@ rc{ pinctrl_ir: ir0 { st,pins { - ir = <&PIO4 0 ALT2 IN>; + ir = <&pio4 0 ALT2 IN>; }; }; }; sbc_serial1 { pinctrl_sbc_serial1: sbc_serial1 { st,pins { - tx = <&PIO2 6 ALT3 OUT>; - rx = <&PIO2 7 ALT3 IN>; + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; }; }; }; @@ -125,15 +125,15 @@ keyscan { pinctrl_keyscan: keyscan { st,pins { - keyin0 = <&PIO0 2 ALT2 IN>; - keyin1 = <&PIO0 3 ALT2 IN>; - keyin2 = <&PIO0 4 ALT2 IN>; - keyin3 = <&PIO2 6 ALT2 IN>; - - keyout0 = <&PIO1 6 ALT2 OUT>; - keyout1 = <&PIO1 7 ALT2 OUT>; - keyout2 = <&PIO0 6 ALT2 OUT>; - keyout3 = <&PIO2 7 ALT2 OUT>; + keyin0 = <&pio0 2 ALT2 IN>; + keyin1 = <&pio0 3 ALT2 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio1 6 ALT2 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; }; }; }; @@ -141,8 +141,8 @@ sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { - sda = <&PIO4 6 ALT1 BIDIR>; - scl = <&PIO4 5 ALT1 BIDIR>; + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; }; }; }; @@ -150,8 +150,8 @@ sbc_i2c1 { pinctrl_sbc_i2c1_default: sbc_i2c1-default { st,pins { - sda = <&PIO3 2 ALT2 BIDIR>; - scl = <&PIO3 1 ALT2 BIDIR>; + sda = <&pio3 2 ALT2 BIDIR>; + scl = <&pio3 1 ALT2 BIDIR>; }; }; }; @@ -159,51 +159,51 @@ gmac1 { pinctrl_mii1: mii1 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&PIO0 7 ALT1 IN BYPASS 1000>; - - mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&PIO1 2 ALT1 IN BYPASS 1000>; - mdint = <&PIO1 3 ALT1 IN BYPASS 0>; - rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - - rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; }; }; pinctrl_rgmii1: rgmii1-0 { st,pins { - txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>; - txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>; - txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>; - txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>; - txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; - - mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; - mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>; - rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>; - rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>; - rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>; - - rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>; + txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; + + clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; }; }; }; @@ -220,7 +220,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x10000>; - PIO5: gpio@fee00000 { + pio5: gpio@fee00000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -228,7 +228,7 @@ reg = <0 0x100>; st,bank-name = "PIO5"; }; - PIO6: gpio@fee01000 { + pio6: gpio@fee01000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -236,7 +236,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO6"; }; - PIO7: gpio@fee02000 { + pio7: gpio@fee02000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -244,7 +244,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO7"; }; - PIO8: gpio@fee03000 { + pio8: gpio@fee03000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -252,7 +252,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO8"; }; - PIO9: gpio@fee04000 { + pio9: gpio@fee04000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -260,7 +260,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO9"; }; - PIO10: gpio@fee05000 { + pio10: gpio@fee05000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -268,7 +268,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO10"; }; - PIO11: gpio@fee06000 { + pio11: gpio@fee06000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -276,7 +276,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO11"; }; - PIO12: gpio@fee07000 { + pio12: gpio@fee07000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -284,7 +284,7 @@ reg = <0x7000 0x100>; st,bank-name = "PIO12"; }; - PIO30: gpio@fee08000 { + pio30: gpio@fee08000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -292,7 +292,7 @@ reg = <0x8000 0x100>; st,bank-name = "PIO30"; }; - PIO31: gpio@fee09000 { + pio31: gpio@fee09000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -304,7 +304,7 @@ serial2-oe { pinctrl_serial2_oe: serial2-1 { st,pins { - output-enable = <&PIO11 3 ALT2 OUT>; + output-enable = <&pio11 3 ALT2 OUT>; }; }; }; @@ -312,8 +312,8 @@ i2c0 { pinctrl_i2c0_default: i2c0-default { st,pins { - sda = <&PIO9 3 ALT1 BIDIR>; - scl = <&PIO9 2 ALT1 BIDIR>; + sda = <&pio9 3 ALT1 BIDIR>; + scl = <&pio9 2 ALT1 BIDIR>; }; }; }; @@ -321,8 +321,8 @@ i2c1 { pinctrl_i2c1_default: i2c1-default { st,pins { - sda = <&PIO12 1 ALT1 BIDIR>; - scl = <&PIO12 0 ALT1 BIDIR>; + sda = <&pio12 1 ALT1 BIDIR>; + scl = <&pio12 0 ALT1 BIDIR>; }; }; }; @@ -330,12 +330,12 @@ fsm { pinctrl_fsm: fsm { st,pins { - spi-fsm-clk = <&PIO12 2 ALT1 OUT>; - spi-fsm-cs = <&PIO12 3 ALT1 OUT>; - spi-fsm-mosi = <&PIO12 4 ALT1 OUT>; - spi-fsm-miso = <&PIO12 5 ALT1 IN>; - spi-fsm-hol = <&PIO12 6 ALT1 OUT>; - spi-fsm-wp = <&PIO12 7 ALT1 OUT>; + spi-fsm-clk = <&pio12 2 ALT1 OUT>; + spi-fsm-cs = <&pio12 3 ALT1 OUT>; + spi-fsm-mosi = <&pio12 4 ALT1 OUT>; + spi-fsm-miso = <&pio12 5 ALT1 IN>; + spi-fsm-hol = <&pio12 6 ALT1 OUT>; + spi-fsm-wp = <&pio12 7 ALT1 OUT>; }; }; }; @@ -352,7 +352,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x6000>; - PIO13: gpio@fe820000 { + pio13: gpio@fe820000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -360,7 +360,7 @@ reg = <0 0x100>; st,bank-name = "PIO13"; }; - PIO14: gpio@fe821000 { + pio14: gpio@fe821000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -368,7 +368,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO14"; }; - PIO15: gpio@fe822000 { + pio15: gpio@fe822000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -376,7 +376,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO15"; }; - PIO16: gpio@fe823000 { + pio16: gpio@fe823000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -384,7 +384,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO16"; }; - PIO17: gpio@fe824000 { + pio17: gpio@fe824000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -392,7 +392,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO17"; }; - PIO18: gpio@fe825000 { + pio18: gpio@fe825000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -405,8 +405,8 @@ serial2 { pinctrl_serial2: serial2-0 { st,pins { - tx = <&PIO17 4 ALT2 OUT>; - rx = <&PIO17 5 ALT2 IN>; + tx = <&pio17 4 ALT2 OUT>; + rx = <&pio17 5 ALT2 IN>; }; }; }; @@ -414,28 +414,28 @@ gmac0 { pinctrl_mii0: mii0 { st,pins { - mdint = <&PIO13 6 ALT2 IN BYPASS 0>; - txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&PIO15 2 ALT2 IN BYPASS 1000>; - col = <&PIO15 3 ALT2 IN BYPASS 1000>; - mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>; + mdint = <&pio13 6 ALT2 IN BYPASS 0>; + txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + crs = <&pio15 2 ALT2 IN BYPASS 1000>; + col = <&pio15 3 ALT2 IN BYPASS 1000>; + mdio= <&pio15 4 ALT2 OUT BYPASS 1500>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>; }; }; @@ -445,25 +445,25 @@ }; pinctrl_rgmii0: rgmii0 { st,pins { - phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>; - txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>; - txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>; - txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>; - txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>; - txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>; - txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; - - mdio = <&PIO15 4 ALT2 OUT BYPASS 0>; - mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>; - rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>; - rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>; - rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>; - rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>; - rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>; - - clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; + txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>; + txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>; + txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>; + txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>; + txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>; + txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; + + mdio = <&pio15 4 ALT2 OUT BYPASS 0>; + mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>; + rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>; + rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>; + rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>; + rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>; + rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>; + + clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>; }; }; }; @@ -480,7 +480,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; - PIO100: gpio@fd6b0000 { + pio100: gpio@fd6b0000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -488,7 +488,7 @@ reg = <0 0x100>; st,bank-name = "PIO100"; }; - PIO101: gpio@fd6b1000 { + pio101: gpio@fd6b1000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -496,7 +496,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO101"; }; - PIO102: gpio@fd6b2000 { + pio102: gpio@fd6b2000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -517,7 +517,7 @@ interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; - PIO103: gpio@fd330000 { + pio103: gpio@fd330000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -525,7 +525,7 @@ reg = <0 0x100>; st,bank-name = "PIO103"; }; - PIO104: gpio@fd331000 { + pio104: gpio@fd331000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -533,7 +533,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO104"; }; - PIO105: gpio@fd332000 { + pio105: gpio@fd332000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -541,7 +541,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO105"; }; - PIO106: gpio@fd333000 { + pio106: gpio@fd333000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; @@ -550,7 +550,7 @@ st,bank-name = "PIO106"; }; - PIO107: gpio@fd334000 { + pio107: gpio@fd334000 { gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index b3dd6ca5c2ae..5f91f455f05b 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -35,7 +35,7 @@ fp_led { #gpio-cells = <1>; label = "Front Panel LED"; - gpios = <&PIO105 7>; + gpios = <&pio105 7>; linux,default-trigger = "heartbeat"; }; }; @@ -55,7 +55,7 @@ phy-mode = "mii"; pinctrl-0 = <&pinctrl_mii0>; - snps,reset-gpio = <&PIO106 2>; + snps,reset-gpio = <&pio106 2>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; @@ -65,7 +65,7 @@ phy-mode = "mii"; st,tx-retime-src = "txclk"; - snps,reset-gpio = <&PIO4 7>; + snps,reset-gpio = <&pio4 7>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index d8a84295c328..c0f50e951554 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -32,11 +32,11 @@ red { #gpio-cells = <1>; label = "Front Panel LED"; - gpios = <&PIO4 1>; + gpios = <&pio4 1>; linux,default-trigger = "heartbeat"; }; green { - gpios = <&PIO4 7>; + gpios = <&pio4 7>; default-state = "off"; }; }; @@ -68,7 +68,7 @@ phy-mode = "rgmii-id"; max-speed = <1000>; st,tx-retime-src = "clk_125"; - snps,reset-gpio = <&PIO3 0>; + snps,reset-gpio = <&pio3 0>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; -- cgit v1.2.3 From c27321141915adea8ec0b5d9ab2f1787fcb70d8b Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 2 Jul 2014 16:08:00 +0200 Subject: ARM: sti: Add STiH407 Kconfig entry to select STIH407_RESET The STiH407 is a STMicroelectronics Digital Consumer electronics family, targetted at set-top-box and other audio/video applications. This patch selects the reset controller driver for this family which is essential to take various IP's on the SoC out of powerdown / reset. Signed-off-by: Peter Griffin Acked-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/mach-sti/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 878e9ec97d0f..8825bc9e2553 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -42,4 +42,14 @@ config SOC_STIH416 and other digital audio/video applications using Flattened Device Trees. +config SOC_STIH407 + bool "STiH407 STMicroelectronics Consumer Electronics family" + default y + select STIH407_RESET + help + This enables support for STMicroelectronics Digital Consumer + Electronics family StiH407 parts, targetted at set-top-box + and other digital audio/video applications using Flattened Device + Trees. + endif -- cgit v1.2.3 From b864a0b98e9ef753f0aa0937b29fcc1ad64ced88 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 2 Jul 2014 16:08:00 +0200 Subject: ARM: sti: Add STiH407 reset controller support. This patch adds the reset controller DT nodes for the powerdown, softreset and picophy controllers. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 4f9024f19866..d2f1aaa870ea 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -8,6 +8,7 @@ */ #include "stih407-clock.dtsi" #include "stih407-pinctrl.dtsi" +#include / { #address-cells = <1>; #size-cells = <1>; @@ -63,6 +64,21 @@ ranges; compatible = "simple-bus"; + powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; + #reset-cells = <1>; + }; + + softreset: softreset-controller { + compatible = "st,stih407-softreset"; + #reset-cells = <1>; + }; + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + syscfg_sbc: sbc-syscfg@9620000 { compatible = "st,stih407-sbc-syscfg", "syscon"; reg = <0x9620000 0x1000>; -- cgit v1.2.3 From 8106d21ca86ba9b92c08e83c5a8b7e6f8d9084d9 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 9 Jul 2014 17:07:00 +0200 Subject: ARM: STi: DT: Add sdhci pins for stih416 This adds the required pin config for both SDHCI controllers on the stih416 SoC. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416-pinctrl.dtsi | 39 ++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 787c2eeca5d5..c2025bc37dd5 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -467,6 +467,45 @@ }; }; }; + + mmc0 { + pinctrl_mmc0: mmc0 { + st,pins { + mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; + data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; + data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; + data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; + data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; + cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; + wp = <&pio15 3 ALT4 IN>; + data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; + data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; + data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; + data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; + pwr = <&pio17 1 ALT4 OUT>; + cd = <&pio17 2 ALT4 IN>; + led = <&pio17 3 ALT4 OUT>; + }; + }; + }; + mmc1 { + pinctrl_mmc1: mmc1 { + st,pins { + mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>; + data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>; + data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>; + data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>; + data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>; + cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>; + data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>; + data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>; + data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>; + data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>; + pwr = <&pio16 2 ALT3 OUT>; + nreset = <&pio13 6 ALT3 OUT>; + }; + }; + }; }; pin-controller-fvdp-fe { -- cgit v1.2.3 From 42d6f28d6492c6208cf7d8a20ccb0cd7cbd95879 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 9 Jul 2014 17:07:00 +0200 Subject: ARM: STi: DT: Add sdhci controller for stih416 This patch adds device tree config for both sdhci controllers on the stih416 SoC. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 84758d76d064..98c43cc81b1d 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -236,5 +236,29 @@ resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, <&softreset STIH416_KEYSCAN_SOFTRESET>; }; + + mmc0: sdhci@fe81e000 { + compatible = "st,sdhci"; + status = "disabled"; + reg = <0xfe81e000 0x1000>; + interrupts = ; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 1>; + }; + + mmc1: sdhci@fe81f000 { + compatible = "st,sdhci"; + status = "disabled"; + reg = <0xfe81f000 0x1000>; + interrupts = ; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 8>; + }; }; }; -- cgit v1.2.3 From 14304e00568f5bf06bef5fa33e4d3d44674fde0a Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 9 Jul 2014 17:07:00 +0200 Subject: ARM: STi: DT: Add sdhci pin configuration for stih415 This patch adds the required pin config for the sdhci controller present in the stih415 SoC. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih415-pinctrl.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 1c413013818c..3791ad95dbaf 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -429,6 +429,27 @@ }; }; }; + + mmc0 { + pinctrl_mmc0: mmc0 { + st,pins { + mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; + data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; + data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; + data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; + data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; + cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; + wp = <&pio15 3 ALT4 IN>; + data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; + data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; + data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; + data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; + pwr = <&pio17 1 ALT4 OUT>; + cd = <&pio17 2 ALT4 IN>; + led = <&pio17 3 ALT4 OUT>; + }; + }; + }; }; pin-controller-left { -- cgit v1.2.3 From 7b40c726b1d26e0e66db7a6adc61311e5e7ec1a5 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 9 Jul 2014 17:07:00 +0200 Subject: ARM: STi: DT: Add sdhci controller for stih415 This patch adds device tree config for the sdhci controller on the stih415 SoC. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih415.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index a0f6f75fe3b5..9198c12765ea 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -218,5 +218,17 @@ resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, <&softreset STIH415_KEYSCAN_SOFTRESET>; }; + + mmc0: sdhci@fe81e000 { + compatible = "st,sdhci"; + status = "disabled"; + reg = <0xfe81e000 0x1000>; + interrupts = ; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 1>; + }; }; }; -- cgit v1.2.3 From 6919edc84cb5a99cddfce082d6f45eefcb146f00 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 9 Jul 2014 17:07:00 +0200 Subject: ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs Because the first sdhci controller is present on both stih415 and stih416 SoC which can both populate the b2020 board, it can be enabled in the generic DT file. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih41x-b2020.dtsi | 4 ++++ arch/arm/boot/dts/stih41x-b2020x.dtsi | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index c0f50e951554..487d7d87dbef 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -74,5 +74,9 @@ pinctrl-0 = <&pinctrl_rgmii1>; }; + + mmc0: sdhci@fe81e000 { + bus-width = <8>; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi index df01c1211b32..f797a0607382 100644 --- a/arch/arm/boot/dts/stih41x-b2020x.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi @@ -8,6 +8,10 @@ */ / { soc { + mmc0: sdhci@fe81e000 { + status = "okay"; + }; + spifsm: spifsm@fe902000 { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From f631bc16721788f27415ab1c75631d4ceed45669 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 9 Jul 2014 17:07:00 +0200 Subject: ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards. The second controller is only present on the stih416 SoC. Also mark this as non-removeable as its eMMC. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416-b2020.dts | 8 ++++++++ arch/arm/boot/dts/stih416-b2020e.dts | 6 ++++++ 2 files changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 4e2df66b99ea..d42ff1dcd89f 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -12,4 +12,12 @@ / { model = "STiH416 B2020"; compatible = "st,stih416-b2020", "st,stih416"; + + soc { + mmc1: sdhci@fe81f000 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index d72e5c704d5f..a0434b6ae772 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -31,5 +31,11 @@ ethernet1: dwmac@fef08000 { snps,reset-gpio = <&pio0 7>; }; + + mmc1: sdhci@fe81f000 { + status = "okay"; + bus-width = <8>; + non-removable; + }; }; }; -- cgit v1.2.3 From 0f6c28b7a49b14c91dd1ece6495b30508d5bb797 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 5 Jun 2014 17:06:00 +0200 Subject: ARM: STi: DT: STiH416: Supply Thermal Controller Device Tree nodes We supply two of these. The first is controlled by the System Configuration registers and the second one provided is a more traditional 'memory mapped' variant. Each are handled by they own sub-driver. Signed-off-by: Ajit Pal Singh Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 98c43cc81b1d..28091548d915 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -237,6 +237,24 @@ <&softreset STIH416_KEYSCAN_SOFTRESET>; }; + temp0 { + compatible = "st,stih416-sas-thermal"; + clock-names = "thermal"; + clocks = <&clockgen_c_vcc 14>; + + status = "okay"; + }; + + temp1@fdfe8000 { + compatible = "st,stih416-mpe-thermal"; + reg = <0xfdfe8000 0x10>; + clocks = <&clockgen_e 3>; + clock-names = "thermal"; + interrupts = ; + + status = "okay"; + }; + mmc0: sdhci@fe81e000 { compatible = "st,sdhci"; status = "disabled"; -- cgit v1.2.3 From d436a609444b05beeced27cc30be88205c716d59 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 11 Jul 2014 13:54:00 +0200 Subject: ARM: DT: STi: STiH416: Add DT node for MiPHY365x The MiPHY365x is a Generic PHY which can serve various SATA or PCIe devices. It has 2 ports which it can use for either; both SATA, both PCIe or one of each in any configuration. Acked-by: Mark Rutland Acked-by: Alexandre Torgue Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416-b2020.dts | 10 ++++++++++ arch/arm/boot/dts/stih416-b2020e.dts | 10 ++++++++++ arch/arm/boot/dts/stih416.dtsi | 22 ++++++++++++++++++++++ 3 files changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index d42ff1dcd89f..7ce798be5e01 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -19,5 +19,15 @@ bus-width = <8>; non-removable; }; + + miphy365x_phy: miphy365x@fe382000 { + phy_port0: port@fe382000 { + st,sata-gen = <3>; + }; + + phy_port1: port@fe38a000 { + st,pcie-tx-pol-inv; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index a0434b6ae772..fa59224115bb 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -37,5 +37,15 @@ bus-width = <8>; non-removable; }; + + miphy365x_phy: miphy365x@fe382000 { + phy_port0: port@fe382000 { + st,sata-gen = <3>; + }; + + phy_port1: port@fe38a000 { + st,pcie-tx-pol-inv; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 28091548d915..a54f6832a9ac 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -9,6 +9,8 @@ #include "stih41x.dtsi" #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" + +#include #include #include / { @@ -278,5 +280,25 @@ clock-names = "mmc"; clocks = <&clk_s_a1_ls 8>; }; + + miphy365x_phy: miphy365x@fe382000 { + compatible = "st,miphy365x-phy"; + st,syscfg = <&syscfg_rear>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + phy_port0: port@fe382000 { + #phy-cells = <1>; + reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>; + reg-names = "sata", "pcie", "syscfg"; + }; + + phy_port1: port@fe38a000 { + #phy-cells = <1>; + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>; + reg-names = "sata", "pcie", "syscfg"; + }; + }; }; }; -- cgit v1.2.3 From 45188b726e231c069a78163a24243b83fbee7d34 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 22 Jul 2014 11:28:00 +0200 Subject: ARM: DT: STi: STiH416: Add DT node for ST's SATA device ARM: DT: STi: STiH416: Add DT node for ST's SATA device Cc: devicetree@vger.kernel.org Acked-by: Alexandre Torgue Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416-b2020.dts | 4 ++++ arch/arm/boot/dts/stih416-b2020e.dts | 4 ++++ arch/arm/boot/dts/stih416.dtsi | 16 ++++++++++++++++ 3 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 7ce798be5e01..5d1543babf56 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -29,5 +29,9 @@ st,pcie-tx-pol-inv; }; }; + + sata0: sata@fe380000{ + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index fa59224115bb..956fab8b8ffe 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -47,5 +47,9 @@ st,pcie-tx-pol-inv; }; }; + + sata0: sata@fe380000{ + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index a54f6832a9ac..1137bdfcca1c 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -300,5 +300,21 @@ reg-names = "sata", "pcie", "syscfg"; }; }; + + sata0: sata@fe380000 { + compatible = "st,sti-ahci"; + reg = <0xfe380000 0x1000>; + interrupts = ; + interrupt-names = "hostc"; + phys = <&phy_port0 MIPHY_TYPE_SATA>; + phy-names = "sata-phy"; + resets = <&powerdown STIH416_SATA0_POWERDOWN>, + <&softreset STIH416_SATA0_SOFTRESET>; + reset-names = "pwr-dwn", "sw-rst"; + clock-names = "ahci_clk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; + + status = "disabled"; + }; }; }; -- cgit v1.2.3 From 58a8d9be52d917136c83ef8fde3bd3743d6db14c Mon Sep 17 00:00:00 2001 From: Gabriel FERNANDEZ Date: Mon, 25 Aug 2014 16:44:00 +0200 Subject: ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0 Patch adds DT entries for clockgen A0 Signed-off-by: Gabriel Fernandez Signed-off-by: Olivier Bideau Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-clock.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index 800f46f009f3..1bfa6799d7c5 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -7,6 +7,10 @@ */ / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator inputs to SoC */ @@ -35,5 +39,30 @@ clock-frequency = <200000000>; clock-output-names = "clk-s-icn-reg-0"; }; + + clockgen-a@090ff000 { + compatible = "st,clkgen-c32"; + reg = <0x90ff000 0x1000>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll-ofd-0"; + }; + + clk_s_a0_flexgen: clk-s-a0-flexgen { + compatible = "st,flexgen"; + + #clock-cells = <1>; + + clocks = <&clk_s_a0_pll 0>, + <&clk_sysin>; + + clock-output-names = "clk-ic-lmi0"; + }; + }; }; }; -- cgit v1.2.3 From 1befe7e49f8d4e706e5ef39fb57dac1da734f163 Mon Sep 17 00:00:00 2001 From: Gabriel FERNANDEZ Date: Mon, 25 Aug 2014 16:44:00 +0200 Subject: ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0 Patch adds DT entries for clockgen C0 Signed-off-by: Gabriel Fernandez Signed-off-by: Olivier Bideau Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-clock.dtsi | 83 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stih407.dtsi | 18 +++---- include/dt-bindings/clock/stih407-clks.h | 11 +++++ 3 files changed, 103 insertions(+), 9 deletions(-) create mode 100644 include/dt-bindings/clock/stih407-clks.h diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index 1bfa6799d7c5..f85571a956f9 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -5,6 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include / { clocks { #address-cells = <1>; @@ -64,5 +65,87 @@ clock-output-names = "clk-ic-lmi0"; }; }; + + clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-C", "st,quadfs"; + reg = <0x9103000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-fs0-ch0", + "clk-s-c0-fs0-ch1", + "clk-s-c0-fs0-ch2", + "clk-s-c0-fs0-ch3"; + }; + + clk_s_c0: clockgen-c@09103000 { + compatible = "st,clkgen-c32"; + reg = <0x9103000 0x1000>; + + clk_s_c0_pll0: clk-s-c0-pll0 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll0-odf-0"; + }; + + clk_s_c0_pll1: clk-s-c0-pll1 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll1-odf-0"; + }; + + clk_s_c0_flexgen: clk-s-c0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_c0_pll0 0>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_quadfs 0>, + <&clk_s_c0_quadfs 1>, + <&clk_s_c0_quadfs 2>, + <&clk_s_c0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-icn-gpu", + "clk-fdma", + "clk-nand", + "clk-hva", + "clk-proc-stfe", + "clk-proc-tp", + "clk-rx-icn-dmu", + "clk-rx-icn-hva", + "clk-icn-cpu", + "clk-tx-icn-dmu", + "clk-mmc-0", + "clk-mmc-1", + "clk-jpegdec", + "clk-ext2fa9", + "clk-ic-bdisp-0", + "clk-ic-bdisp-1", + "clk-pp-dmu", + "clk-vid-dmu", + "clk-dss-lpc", + "clk-st231-aud-0", + "clk-st231-gp-1", + "clk-st231-dmu", + "clk-icn-lmi", + "clk-tx-icn-disp-1", + "clk-icn-sbc", + "clk-stfe-frc2", + "clk-eth-phy", + "clk-eth-ref-phyclk", + "clk-flash-promip", + "clk-main-disp", + "clk-aux-disp", + "clk-compo-dvp"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index d2f1aaa870ea..50637f5168d4 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -120,7 +120,7 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial0>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; status = "disabled"; }; @@ -131,7 +131,7 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial1>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; status = "disabled"; }; @@ -142,7 +142,7 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; status = "disabled"; }; @@ -174,7 +174,7 @@ compatible = "st,comms-ssc4-i2c"; interrupts = ; reg = <0x9840000 0x110>; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -187,7 +187,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9841000 0x110>; interrupts = ; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -200,7 +200,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9842000 0x110>; interrupts = ; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -213,7 +213,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9843000 0x110>; interrupts = ; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -226,7 +226,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9844000 0x110>; interrupts = ; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -239,7 +239,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0x9845000 0x110>; interrupts = ; - clocks = <&clk_ext2f_a9>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; diff --git a/include/dt-bindings/clock/stih407-clks.h b/include/dt-bindings/clock/stih407-clks.h new file mode 100644 index 000000000000..1f9bfe0e47f8 --- /dev/null +++ b/include/dt-bindings/clock/stih407-clks.h @@ -0,0 +1,11 @@ +/* + * This header provides constants clk index STMicroelectronics + * STiH407 SoC. + */ +#ifndef _DT_BINDINGS_CLK_STIH407 +#define _DT_BINDINGS_CLK_STIH407 + +/* CLOCKGEN C0 */ +#define CLK_EXT2F_A9 13 + +#endif -- cgit v1.2.3 From 6e67a5105d5e89af245dadf6c4c0e5d15adc74a2 Mon Sep 17 00:00:00 2001 From: Gabriel FERNANDEZ Date: Mon, 25 Aug 2014 16:44:00 +0200 Subject: ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3 Patch adds DT entries for clockgen D0/D2/D3 Signed-off-by: Gabriel Fernandez Signed-off-by: Olivier Bideau Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-clock.dtsi | 126 +++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index f85571a956f9..5f7a88d95879 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -147,5 +147,131 @@ "clk-compo-dvp"; }; }; + + clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9104000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d0-fs0-ch0", + "clk-s-d0-fs0-ch1", + "clk-s-d0-fs0-ch2", + "clk-s-d0-fs0-ch3"; + }; + + clockgen-d0@09104000 { + compatible = "st,clkgen-c32"; + reg = <0x9104000 0x1000>; + + clk_s_d0_flexgen: clk-s-d0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d0_quadfs 0>, + <&clk_s_d0_quadfs 1>, + <&clk_s_d0_quadfs 2>, + <&clk_s_d0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-pcm-0", + "clk-pcm-1", + "clk-pcm-2", + "clk-spdiff"; + }; + }; + + clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9106000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d2-fs0-ch0", + "clk-s-d2-fs0-ch1", + "clk-s-d2-fs0-ch2", + "clk-s-d2-fs0-ch3"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + clockgen-d2@x9106000 { + compatible = "st,clkgen-c32"; + reg = <0x9106000 0x1000>; + + clk_s_d2_flexgen: clk-s-d2-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>, + <&clk_s_d2_quadfs 2>, + <&clk_s_d2_quadfs 3>, + <&clk_sysin>, + <&clk_sysin>, + <&clk_tmdsout_hdmi>; + + clock-output-names = "clk-pix-main-disp", + "clk-pix-pip", + "clk-pix-gdp1", + "clk-pix-gdp2", + "clk-pix-gdp3", + "clk-pix-gdp4", + "clk-pix-aux-disp", + "clk-denc", + "clk-pix-hddac", + "clk-hddac", + "clk-sddac", + "clk-pix-dvo", + "clk-dvo", + "clk-pix-hdmi", + "", + "clk-ref-hdmiphy"; + }; + }; + + clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9107000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d3-fs0-ch0", + "clk-s-d3-fs0-ch1", + "clk-s-d3-fs0-ch2", + "clk-s-d3-fs0-ch3"; + }; + + clockgen-d3@9107000 { + compatible = "st,clkgen-c32"; + reg = <0x9107000 0x1000>; + + clk_s_d3_flexgen: clk-s-d3-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d3_quadfs 0>, + <&clk_s_d3_quadfs 1>, + <&clk_s_d3_quadfs 2>, + <&clk_s_d3_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-stfe-frc1", + "clk-tsout-0", + "clk-tsout-1", + "clk-mchi", + "clk-vsens-compo", + "clk-frc1-remote", + "clk-lpc-0", + "clk-lpc-1"; + }; + }; }; }; -- cgit v1.2.3 From 89e5c085748b0bc3333eb60b1a668f11f1ce99f4 Mon Sep 17 00:00:00 2001 From: Gabriel FERNANDEZ Date: Mon, 25 Aug 2014 16:44:00 +0200 Subject: ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9 Patch adds DT entries for clockgen A9 Signed-off-by: Gabriel Fernandez Signed-off-by: Olivier Bideau Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-clock.dtsi | 55 ++++++++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index 5f7a88d95879..a2667a1a0ac8 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -24,10 +24,59 @@ /* * ARM Peripheral clock for timers */ - arm_periph_clk: arm-periph-clk { + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <600000000>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * A9 PLL. + */ + clockgen-a9@92b0000 { + compatible = "st,clkgen-c32"; + reg = <0x92b0000 0xffff>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks. + */ + clk_m_a9: clk-m-a9@92b0000 { + #clock-cells = <0>; + compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0x92b0000 0x10000>; + + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_s_c0_flexgen 13>, + <&clk_m_a9_ext2f_div2>; + }; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; }; /* -- cgit v1.2.3 From 77deed2bbd64e88b3c31283a6ecf771d637ff161 Mon Sep 17 00:00:00 2001 From: Gabriel FERNANDEZ Date: Thu, 4 Sep 2014 14:59:00 +0200 Subject: ARM: STi: DT: STiH407: Add all defines for STiH407 DT clocks This patch adds all clock defines for clockgen C0,D0,D2 and D3 Signed-off-by: Gabriel Fernandez Signed-off-by: Maxime Coquelin --- include/dt-bindings/clock/stih407-clks.h | 75 ++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/include/dt-bindings/clock/stih407-clks.h b/include/dt-bindings/clock/stih407-clks.h index 1f9bfe0e47f8..7af2b717b3b2 100644 --- a/include/dt-bindings/clock/stih407-clks.h +++ b/include/dt-bindings/clock/stih407-clks.h @@ -6,6 +6,81 @@ #define _DT_BINDINGS_CLK_STIH407 /* CLOCKGEN C0 */ +#define CLK_ICN_GPU 0 +#define CLK_FDMA 1 +#define CLK_NAND 2 +#define CLK_HVA 3 +#define CLK_PROC_STFE 4 +#define CLK_PROC_TP 5 +#define CLK_RX_ICN_DMU 6 +#define CLK_RX_ICN_DISP_0 6 +#define CLK_RX_ICN_DISP_1 6 +#define CLK_RX_ICN_HVA 7 +#define CLK_RX_ICN_TS 7 +#define CLK_ICN_CPU 8 +#define CLK_TX_ICN_DMU 9 +#define CLK_TX_ICN_HVA 9 +#define CLK_TX_ICN_TS 9 +#define CLK_ICN_COMPO 9 +#define CLK_MMC_0 10 +#define CLK_MMC_1 11 +#define CLK_JPEGDEC 12 +#define CLK_ICN_REG 13 +#define CLK_TRACE_A9 13 +#define CLK_PTI_STM 13 #define CLK_EXT2F_A9 13 +#define CLK_IC_BDISP_0 14 +#define CLK_IC_BDISP_1 15 +#define CLK_PP_DMU 16 +#define CLK_VID_DMU 17 +#define CLK_DSS_LPC 18 +#define CLK_ST231_AUD_0 19 +#define CLK_ST231_GP_0 19 +#define CLK_ST231_GP_1 20 +#define CLK_ST231_DMU 21 +#define CLK_ICN_LMI 22 +#define CLK_TX_ICN_DISP_0 23 +#define CLK_TX_ICN_DISP_1 23 +#define CLK_ICN_SBC 24 +#define CLK_STFE_FRC2 25 +#define CLK_ETH_PHY 26 +#define CLK_ETH_REF_PHYCLK 27 +#define CLK_FLASH_PROMIP 28 +#define CLK_MAIN_DISP 29 +#define CLK_AUX_DISP 30 +#define CLK_COMPO_DVP 31 +/* CLOCKGEN D0 */ +#define CLK_PCM_0 0 +#define CLK_PCM_1 1 +#define CLK_PCM_2 2 +#define CLK_SPDIFF 3 + +/* CLOCKGEN D2 */ +#define CLK_PIX_MAIN_DISP 0 +#define CLK_PIX_PIP 1 +#define CLK_PIX_GDP1 2 +#define CLK_PIX_GDP2 3 +#define CLK_PIX_GDP3 4 +#define CLK_PIX_GDP4 5 +#define CLK_PIX_AUX_DISP 6 +#define CLK_DENC 7 +#define CLK_PIX_HDDAC 8 +#define CLK_HDDAC 9 +#define CLK_SDDAC 10 +#define CLK_PIX_DVO 11 +#define CLK_DVO 12 +#define CLK_PIX_HDMI 13 +#define CLK_TMDS_HDMI 14 +#define CLK_REF_HDMIPHY 15 + +/* CLOCKGEN D3 */ +#define CLK_STFE_FRC1 0 +#define CLK_TSOUT_0 1 +#define CLK_TSOUT_1 2 +#define CLK_MCHI 3 +#define CLK_VSENS_COMPO 4 +#define CLK_FRC1_REMOTE 5 +#define CLK_LPC_0 6 +#define CLK_LPC_1 7 #endif -- cgit v1.2.3 From 43ca480c4e42f536fcf18118afcffad685e1292c Mon Sep 17 00:00:00 2001 From: Gabriel FERNANDEZ Date: Thu, 4 Sep 2014 14:59:00 +0200 Subject: ARM: STi: DT: STiH407: Fix: clk-tmds-hdmi clock is missing Signed-off-by: Gabriel Fernandez Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-clock.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index a2667a1a0ac8..e65744fc12ab 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -280,7 +280,7 @@ "clk-pix-dvo", "clk-dvo", "clk-pix-hdmi", - "", + "clk-tmds-hdmi", "clk-ref-hdmiphy"; }; }; -- cgit v1.2.3 From 6bd5e87017bf62a035e123f2334318afa032bcb7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 11 Sep 2014 18:56:33 +0200 Subject: ARM: nomadik: move MMC/SD card detect GPIO to board DTS This pushes the setting of the card detect GPIO pin down into the top-level file for the board, since it is not a property of the ASIC (which this DTSI is about) but a property of the board design. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 7 +++++++ arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 1 - 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 90d8b6c7a205..c795ee8a356a 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -65,6 +65,13 @@ }; }; + /* Configure card detect for the uSD slot */ + amba { + mmcsd: sdi@101f6000 { + cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* This will bias the MMC/SD card detect line */ diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index dbcf521b017f..35c79eb24f93 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -844,7 +844,6 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; -- cgit v1.2.3 From a81cf1ad2a0cd3b77e9f70e7284e15335baf4a80 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 27 Sep 2014 12:33:32 +0200 Subject: ARM: nomadik: disable chrystals in top level board files Do not force disable the chrystals in the SoC file, this is per-board dependent. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 35c79eb24f93..1ee9372191df 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -182,8 +182,6 @@ src: src@101e0000 { compatible = "stericsson,nomadik-src"; reg = <0x101e0000 0x1000>; - disable-sxtalo; - disable-mxtalo; /* * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz -- cgit v1.2.3 From 2096eb80e446860b57001ba419e5038b208a820f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 27 Sep 2014 15:40:42 +0200 Subject: ARM: nomadik: move GPIO I2C to S8815 board file The idea to use two GPIO pins for bit-banged I2C is an S8815 pecularity, so move this over to the board-specific file and out of the SoC core DTSI file. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 25 +++++++++++++++++++++++++ arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 24 ------------------------ 2 files changed, 25 insertions(+), 24 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index c795ee8a356a..33caad8df276 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -47,6 +47,14 @@ }; }; }; + gpioi2c { + gpioi2c_default_mode: gpioi2c_default { + gpioi2c_default_cfg { + ste,pins = "GPIO73_C21", "GPIO74_C20"; + ste,input = <0>; + }; + }; + }; user-led { user_led_default_mode: user_led_default { user_led_default_cfg { @@ -65,6 +73,23 @@ }; }; + /* GPIO I2C connected to the USB portions of the STw4811 only */ + gpio-i2c { + compatible = "i2c-gpio"; + gpios = <&gpio2 10 0>, /* sda */ + <&gpio2 9 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpioi2c_default_mode>; + + stw4811@2d { + compatible = "st,stw4811-usb"; + reg = <0x2d>; + }; + }; + + /* Configure card detect for the uSD slot */ amba { mmcsd: sdi@101f6000 { diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 1ee9372191df..49b17c7dfb1b 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -169,14 +169,6 @@ }; }; }; - i2c2 { - i2c2_default_mode: i2c2_default { - i2c2_default_cfg { - ste,pins = "GPIO73_C21", "GPIO74_C20"; - ste,input = <0>; - }; - }; - }; }; src: src@101e0000 { @@ -747,22 +739,6 @@ }; }; - /* I2C2 connected to the USB portions of the STw4811 only */ - i2c2 { - compatible = "i2c-gpio"; - gpios = <&gpio2 10 0>, /* sda */ - <&gpio2 9 0>; /* scl */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_default_mode>; - - stw4811@2d { - compatible = "st,stw4811-usb"; - reg = <0x2d>; - }; - }; - amba { compatible = "arm,amba-bus"; #address-cells = <1>; -- cgit v1.2.3 From 43c4034963d6e838d971cbe59bfe84ae6e8370e6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 27 Sep 2014 15:45:02 +0200 Subject: ARM: nomadik: set up MCDATDIR2 This extra data line for high-speed MMC transfers was unrouted, set it up properly in the dtsi file. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 49b17c7dfb1b..c638c1ce2fc4 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -117,7 +117,7 @@ mmcsd_default_mux: mmcsd_mux { mmcsd_default_mux { ste,function = "mmcsd"; - ste,pins = "mmcsd_a_1"; + ste,pins = "mmcsd_a_1", "mmcsd_b_1"; }; }; mmcsd_default_mode: mmcsd_default { @@ -127,9 +127,9 @@ ste,output = <0>; }; mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */ + /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ ste,pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13"; + "GPIO16_C13", "GPIO23_D15"; ste,output = <1>; }; mmcsd_default_cfg3 { -- cgit v1.2.3 From 98ba16bb22d12740a246b8339db4969e2822ce33 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Oct 2014 23:44:17 +0200 Subject: ARM: nomadik: push ethernet down to board The SoC file defines the location and type of the ethernet adapter, this should be in the per-board file, as it is by no means necessary to have an ethernet adapter connected to this memory space. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 24 ++++++++++++++++-------- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 12 ------------ 2 files changed, 16 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 33caad8df276..e411ff7769fe 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -4,6 +4,7 @@ */ /dts-v1/; +#include #include "ste-nomadik-stn8815.dtsi" / { @@ -14,14 +15,6 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; - /* This is where the interrupt is routed on the S8815 board */ - external-bus@34000000 { - ethernet@300 { - interrupt-parent = <&gpio3>; - interrupts = <8 0x1>; - }; - }; - src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; @@ -73,6 +66,21 @@ }; }; + /* Ethernet */ + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + }; + }; + /* GPIO I2C connected to the USB portions of the STw4811 only */ gpio-i2c { compatible = "i2c-gpio"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index c638c1ce2fc4..f435ff20aefe 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -673,18 +673,6 @@ }; }; - external-bus@34000000 { - compatible = "simple-bus"; - reg = <0x34000000 0x1000000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x34000000 0x1000000>; - ethernet@300 { - compatible = "smsc,lan91c111"; - reg = <0x300 0x0fd00>; - }; - }; - /* I2C0 connected to the STw4811 power management chip */ i2c0 { compatible = "st,nomadik-i2c", "arm,primecell"; -- cgit v1.2.3 From 451f2334f09c4387dcd51a628eda534ed7f66d2a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 9 Oct 2014 22:10:35 +0200 Subject: ARM: nomadik: device tree for NHK15 board This adds a device tree for the Nomadik NHK15 development kit board. Signed-off-by: Linus Walleij --- .../devicetree/bindings/arm/ste-nomadik.txt | 6 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/ste-nomadik-nhk15.dts | 151 +++++++++++++++++++++ arch/arm/mach-nomadik/cpu-8815.c | 1 + 4 files changed, 160 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/ste-nomadik-nhk15.dts diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt index 6256ec31666d..2fdff5a806cf 100644 --- a/Documentation/devicetree/bindings/arm/ste-nomadik.txt +++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt @@ -10,6 +10,12 @@ Required root node property: src Boards with the Nomadik SoC include: +Nomadik NHK-15 board manufactured by ST Microelectronics: + +Required root node property: + +compatible="st,nomadik-nhk-15"; + S8815 "MiniKit" manufactured by Calao Systems: Required root node property: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..50bb73ec2b7d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -274,7 +274,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb -dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb +dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \ + ste-nomadik-nhk15.dtb dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts new file mode 100644 index 000000000000..a8c00ee7522a --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -0,0 +1,151 @@ +/* + * Device Tree for the ST-Ericsson Nomadik S8815 board + * Produced by Calao Systems + */ + +/dts-v1/; +#include +#include +#include "ste-nomadik-stn8815.dtsi" + +/ { + model = "Nomadik STN8815NHK"; + compatible = "st,nomadik-nhk-15"; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; + }; + + aliases { + stmpe-i2c0 = &stmpe0; + stmpe-i2c1 = &stmpe1; + }; + + pinctrl { + stmpe2401_1 { + stmpe2401_1_nhk_mode: stmpe2401_1_nhk { + nhk_cfg1 { + ste,pins = "GPIO76_B20"; // IRQ line + ste,input = <0>; + }; + nhk_cfg2 { + ste,pins = "GPIO77_B8"; // reset line + ste,output = <1>; + }; + }; + }; + stmpe2401_2 { + stmpe2401_2_nhk_mode: stmpe2401_2_nhk { + nhk_cfg1 { + ste,pins = "GPIO78_A8"; // IRQ line + ste,input = <0>; + }; + nhk_cfg2 { + ste,pins = "GPIO79_C9"; // reset line + ste,output = <1>; + }; + }; + }; + }; + + src@101e0000 { + /* These chrystal outputs are not used on this board */ + disable-sxtalo; + disable-mxtalo; + }; + + /* This is where the interrupt is routed on the NHK-15 debug board */ + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + reg-io-width = <2>; + reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&stmpe_gpio44>; + interrupts = <11 IRQ_TYPE_EDGE_RISING>; + }; + }; + + i2c0 { + stmpe0: stmpe2401@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77 + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76 + interrupt-parent = <&gpio2>; + interrupt-controller; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&stmpe2401_1_nhk_mode>; + stmpe_gpio43: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + /* Some pins in alternate functions */ + st,norequest-mask = <0xf0f002>; + }; + stmpe_keypad { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00020072 // Vol down + 0x00030073 // Vol up + 0x0100009e // Back + 0x010100e3 // TV out + 0x01020098 // Lock + 0x0103013b // Start + 0x020000a3 // Next + 0x020100a4 // Play + 0x020200a5 // Prev + 0x02030160 // OK + 0x03000069 // Left + 0x0301006a // Right + 0x03020067 // Up + 0x0303006c>; // Down + }; + }; + stmpe1: stmpe2401@44 { + compatible = "st,stmpe2401"; + reg = <0x44>; + reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79 + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78 + interrupt-parent = <&gpio2>; + interrupt-controller; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&stmpe2401_2_nhk_mode>; + stmpe_gpio44: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + amba { + mmcsd: sdi@101f6000 { + cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>; + }; + }; + + /* Custom board node with GPIO pins to active etc */ + usb-s8815 { + /* This will turn off SATA so that MMC/SD can thrive */ + mmcsd-gpio { + gpios = <&stmpe_gpio44 2 0x1>; + }; + }; +}; diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 9116ca476d7c..9bda46f1fab7 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -144,6 +144,7 @@ static int __init cpu8815_mmcsd_init(void) device_initcall(cpu8815_mmcsd_init); static const char * cpu8815_board_compat[] = { + "st,nomadik-nhk-15", "calaosystems,usb-s8815", NULL, }; -- cgit v1.2.3 From a9ce1afb35317d2a0646c7530f0ae9822c93cd69 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 6 Oct 2014 11:37:56 +0200 Subject: ARM: mvebu: Fix the Aurora L2 cache node with the required cache-unified property The L2 cache controller on the Armada 370 and Armada XP SoCs is a unified cache. Moreover, the Aurora cache controller is compatible with the L2x0 cache controller: the "cache-unified" property is required by its binding. This patch fixes the Aurora L2 cache node for the Armada 370 and Armada XP SoCs by adding this property. Reported-by: Sebastian Hesselbarth Signed-off-by: Gregory CLEMENT Acked-by: Sebastian Hesselbarth Link: https://lkml.kernel.org/r/1412588276-4514-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 1 + arch/arm/boot/dts/armada-xp.dtsi | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 6b3c23b1e138..7851942e244a 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -95,6 +95,7 @@ compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; + cache-unified; wt-override; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bff9f6c18db1..e1707133ee18 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -39,6 +39,7 @@ compatible = "marvell,aurora-system-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; + cache-unified; wt-override; }; -- cgit v1.2.3 From 3622daf85d2becdd99e1555f747dc6c4462b2d97 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Fri, 24 Oct 2014 23:22:01 +0200 Subject: arm: mvebu: Fix LED color in NETGEAR ReadyNAS 102 .dts file When writing initial .dts file for NETGEAR ReadyNAS 102, I put the wrong color for backup and SATA leds (green instead of blue for all three). Reported-by: Johan Kristell Signed-off-by: Arnaud Ebalard Acked-by: Andrew Lunn Acked-by: Gregory CLEMENT Link: https://lkml.kernel.org/r/4eb4049d934a3a8fe9f7235dafb6842422792566.1414185031.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 3aebd93cc33c..f79579bdf8fe 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -204,20 +204,20 @@ default-state = "keep"; }; - green-sata1-led { - label = "rn102:green:sata1"; + blue-sata1-led { + label = "rn102:blue:sata1"; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green-sata2-led { - label = "rn102:green:sata2"; + blue-sata2-led { + label = "rn102:blue:sata2"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green-backup-led { - label = "rn102:green:backup"; + blue-backup-led { + label = "rn102:blue:backup"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "on"; }; -- cgit v1.2.3 From 7bb2fe59f9f65bf66767b18dc338811df4b2c3e2 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Fri, 24 Oct 2014 23:22:16 +0200 Subject: arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file On NETGEAR ReadyNAS 102, the two disks are connected to the external Marvell 88SE9170 SATA Controller connected to the PCIe bus. The rear eSATA port is connected to the native Armada 370 SATA controller. This patch updates the comments in .dts file wrt SATA interfaces and reduces the number of ports for native Armada 370 interface from 2 to 1. Signed-off-by: Arnaud Ebalard Acked-by: Andrew Lunn Acked-by: Gregory CLEMENT Link: https://lkml.kernel.org/r/4af680f9a68281755e31df2491f0590046138230.1414185031.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index f79579bdf8fe..1e38628f4060 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -35,7 +35,7 @@ pcie-controller { status = "okay"; - /* Connected to Marvell SATA controller */ + /* Connected to Marvell 88SE9170 SATA controller */ pcie@1,0 { /* Port 0, Lane 0 */ status = "okay"; @@ -53,8 +53,9 @@ status = "okay"; }; + /* eSATA interface */ sata@a0000 { - nr-ports = <2>; + nr-ports = <1>; status = "okay"; }; -- cgit v1.2.3 From 9a27b4495888f12a9361dacc8b673e384a50d144 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sat, 25 Oct 2014 11:48:42 -0300 Subject: ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC Now that the timer and watchdog drivers support the Armada 375 usage of the reference clock, we can enable it in the devicetree. Signed-off-by: Ezequiel Garcia Reviewed-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1414248522-16055-5-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-375.dtsi | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index de6571445cef..9721e55384ce 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -36,6 +36,12 @@ #clock-cells = <0>; clock-frequency = <2000000000>; }; + /* 25 MHz reference crystal */ + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; }; cpus { @@ -366,13 +372,15 @@ <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <&mpic 5>, <&mpic 6>; - clocks = <&coreclk 0>; + clocks = <&coreclk 0>, <&refclk>; + clock-names = "nbclk", "fixed"; }; watchdog@20300 { compatible = "marvell,armada-375-wdt"; reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>; - clocks = <&coreclk 0>; + clocks = <&coreclk 0>, <&refclk>; + clock-names = "nbclk", "fixed"; }; cpurst@20800 { -- cgit v1.2.3 From ab3172efdb402cab9e33703f0d619c745295feb2 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 25 Oct 2014 17:32:42 +0200 Subject: ARM: mvebu: Enable rear eSATA ports of NETGEAR ReadyNAS 2120 NETGEAR ReadyNAS 2120 supports its four main SATA disks via 2 Marvell 88SE9170 SATA controllers connected on the PCIe bus of the the SoC. The two eSATA ports available at the rear of the device are handled by the native SATA controller of the Armada XP SoC powering the NAS. This patch enables the SoC SATA controller in the .dts file to make those two rear ports available. Signed-off-by: Arnaud Ebalard Acked-by: Andrew Lunn Link: https://lkml.kernel.org/r/f3876c7a9ef11eb758b9df18c671ee740b8be614.1414250947.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 7d8f32873e82..e3a8c456bb84 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -137,6 +137,12 @@ }; }; + /* Two rear eSATA ports */ + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + serial@12000 { status = "okay"; }; -- cgit v1.2.3 From 8c0ff7a1df5c765abf877d5f03af24c2c051c1f9 Mon Sep 17 00:00:00 2001 From: Claudio Leite Date: Fri, 31 Oct 2014 23:13:30 +0100 Subject: ARM: Kirkwood: Add support for DLink DIR665 Add a device tree description of the DLINK DIR665 wireless access point. The support for the 88E6171 switch will be added in a later patch. Signed-off-by: Claudio Leite Signed-off-by: Andrew Lunn Link: https://lkml.kernel.org/r/1414793613-11798-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-dir665.dts | 233 ++++++++++++++++++++++++++++++++++ 2 files changed, 234 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-dir665.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..31529ccc67a0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -104,6 +104,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-d2net.dtb \ kirkwood-db-88f6281.dtb \ kirkwood-db-88f6282.dtb \ + kirkwood-dir665.dtb \ kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts new file mode 100644 index 000000000000..d5ca9284db13 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -0,0 +1,233 @@ +/* + * Copyright (C) 2014 Claudio Leite + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "D-Link DIR-665"; + compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; /* 128 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 =< &pmx_led_usb + &pmx_led_internet_blue + &pmx_led_internet_amber + &pmx_led_5g &pmx_led_status_blue + &pmx_led_wps &pmx_led_status_amber + &pmx_led_24g + &pmx_btn_restart &pmx_btn_wps>; + pinctrl-names = "default"; + + pmx_led_usb: pmx-led-usb { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_led_internet_blue: pmx-led-internet-blue { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_internet_amber: pmx-led-internet-amber { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_5g: pmx-led-5g { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_status_blue: pmx-led-status-blue { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_wps: pmx-led-wps { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_status_amber: pmx-led-status-amber { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_24g: pmx-led-24g { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_btn_restart: pmx-btn-restart { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_btn_wps: pmx-btn-wps { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + }; + + spi@10600 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l12805d"; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "nvram"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "kernel"; + reg = <0x40000 0x180000>; + }; + + partition@1c0000 { + label = "rootfs"; + reg = <0x1c0000 0xe00000>; + }; + + cal_data: partition@fc0000 { + label = "cal_data"; + reg = <0xfc0000 0x10000>; + read-only; + }; + + partition@fd0000 { + label = "lang_pack"; + reg = <0xfd0000 0x30000>; + read-only; + }; + }; + }; + + serial@12000 { + status = "okay"; + }; + + i2c@11000 { + status = "okay"; + }; + + ehci@50000 { + status = "okay"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-usb { + label = "dir665:blue:usb"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + blue-internet { + /* Can only be turned on if the Internet + * Ethernet port has Link + */ + label = "dir665:blue:internet"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + amber-internet { + label = "dir665:amber:internet"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + blue-wifi5g { + label = "dir665:blue:5g"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + blue-status { + label = "dir665:blue:status"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + blue-wps { + label = "dir665:blue:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + amber-status { + label = "dir665:amber:status"; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + }; + blue-24g { + label = "dir665:blue:24g"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mdio { + status = "okay"; +}; + +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set + * fixed speed and duplex. */ +ð0 { + status = "okay"; + + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +/* eth1 is connected to the switch as well. However DSA only supports a + * single CPU port. So leave this port disabled to avoid confusion. */ + +ð1 { + status = "disabled"; +}; + +/* There is no battery on the boards, so the RTC does not keep time + * when there is no power, making it useless. */ +&rtc { + status = "disabled"; +}; -- cgit v1.2.3 From dd5dc02e679c33b74a918faff596a7381e6bce5e Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 31 Oct 2014 23:13:31 +0100 Subject: ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture The DIR665 has an 8 port Ethernet Switch, a Marvell mv88e6171. Add a DSA node in DT, to instantiate DSA support for the 4 back panel ports, the Internet port, and the port to the CPU which is connected to eth0. Signed-off-by: Andrew Lunn Link: https://lkml.kernel.org/r/1414793613-11798-3-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-dir665.dts | 45 +++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index d5ca9284db13..786959ee9cbe 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -202,6 +202,51 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + }; + }; + }; }; &mdio { -- cgit v1.2.3 From 89f668765a03abe48f205cc79640246938799f4d Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Sun, 2 Nov 2014 10:20:00 +0000 Subject: ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs This patch adds the right pins topology for the MAC and MDIO found in RK3066 SoCs. Boards based on this SoC have an initial support for the emac-rockchip dt-binding. Signed-off-by: Romain Perier Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 0e99470db772..41ffd4951ef3 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -234,6 +234,24 @@ bias-disable; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = , /* mac_clk */ + , /* tx_en */ + , /* txd1 */ + , /* txd0 */ + , /* rx_err */ + , /* crs_dvalid */ + , /* rxd1 */ + ; /* rxd0 */ + }; + + emac_mdio: emac-mdio { + rockchip,pins = , /* mac_md */ + ; /* mac_mdclk */ + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = ; @@ -587,3 +605,7 @@ &wdt { compatible = "rockchip,rk3066-wdt", "snps,dw-wdt"; }; + +&emac { + compatible = "rockchip,rk3066-emac"; +}; -- cgit v1.2.3 From ccfe128d3b4735ac1750d27010ad4b0c8693eefb Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Sun, 2 Nov 2014 10:20:01 +0000 Subject: ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066 This patch adds initial support for the Marsboard RK3066. It enables EMAC Rockchip which is the ethernet support on the board and registers it as a supported rockchip platform. Signed-off-by: Romain Perier Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3066a-marsboard.dts | 192 +++++++++++++++++++++ 3 files changed, 197 insertions(+) create mode 100644 arch/arm/boot/dts/rk3066a-marsboard.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 857f12636eb2..eaa3d1a0eb05 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,6 +1,10 @@ Rockchip platforms device tree bindings --------------------------------------- +- MarsBoard RK3066 board: + Required root node properties: + - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; + - bq Curie 2 tablet: Required root node properties: - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..45dc351a81fc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -365,6 +365,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ + rk3066a-marsboard.dtb \ rk3188-radxarock.dtb \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts new file mode 100644 index 000000000000..57489ee54022 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2014 Romain Perier + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "MarsBoard RK3066"; + compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; + + memory { + reg = <0x60000000 0x40000000>; + }; + + vcc_sd0: sdmmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vcc_rtc: regulator@0 { + regulator-name = "vcc_rtc"; + regulator-always-on; + }; + + vcc_io: regulator@1 { + regulator-name = "vcc_io"; + regulator-always-on; + }; + + vdd_arm: regulator@2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_ddr: regulator@3 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc18_cif: regulator@5 { + regulator-name = "vcc18_cif"; + regulator-always-on; + }; + + vdd_11: regulator@6 { + regulator-name = "vdd_11"; + regulator-always-on; + }; + + vcc_25: regulator@7 { + regulator-name = "vcc_25"; + regulator-always-on; + }; + + vcc_18: regulator@8 { + regulator-name = "vcc_18"; + regulator-always-on; + }; + + vcc25_hdmi: regulator@9 { + regulator-name = "vcc25_hdmi"; + regulator-always-on; + }; + + vcca_33: regulator@10 { + regulator-name = "vcca_33"; + regulator-always-on; + }; + + vcc_rmii: regulator@11 { + regulator-name = "vcc_rmii"; + }; + + vcc28_cif: regulator@12 { + regulator-name = "vcc28_cif"; + regulator-always-on; + }; + }; + }; +}; + +/* must be included after &tps gets defined */ +#include "tps65910.dtsi" + +&emac { + status = "okay"; + + phy = <&phy0>; + phy-supply = <&vcc_rmii>; + + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl { + lan8720a { + phy_int: phy-int { + rockchip,pins = ; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; -- cgit v1.2.3 From e5b0deda04773434fa61ba8afa1ad9d56723f573 Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Thu, 30 Oct 2014 16:51:17 +0100 Subject: ARM: dts: rockchip: add serial aliases for rk3066 and rk3188 Add aliases for UARTs on rk3066 and rk3188 in order to fix the numbering scheme. This will keep the debug console on ttyS2 when UART 1 is disabled, for example. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3xxx.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 9ba92de511ca..87df6a8955aa 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -29,6 +29,10 @@ mshc0 = &emmc; mshc1 = &mmc0; mshc2 = &mmc1; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; spi0 = &spi0; spi1 = &spi1; }; -- cgit v1.2.3 From fbdbc7327e5b5fbe184152c250b358707b293479 Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Wed, 15 Oct 2014 10:23:02 -0700 Subject: ARM: dts: rockchip: add pmu references to cpus nodes This patch add pmu reference and enable-method for smp Signed-off-by: Kever Yang Tested-by: Kevin Hilman Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cfc43789cac6..3f43cf6ca883 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -46,6 +46,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; + rockchip,pmu = <&pmu>; cpu0: cpu@500 { device_type = "cpu"; -- cgit v1.2.3 From 1123d412bb52807e173930f1b6e915adad24d61e Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Wed, 15 Oct 2014 10:23:04 -0700 Subject: ARM: dts: rockchip: add intmem node for rk3288 smp support This patch add intmem node des which is needed by platsmp.c Signed-off-by: Kever Yang Tested-by: Kevin Hilman Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 3f43cf6ca883..e3b8b4dfc631 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -464,6 +464,18 @@ status = "disabled"; }; + bus_intmem@ff700000 { + compatible = "mmio-sram"; + reg = <0xff700000 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff700000 0x18000>; + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x00 0x10>; + }; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; -- cgit v1.2.3 From 044542af535f949a28c6193c7f93a183b290681d Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Wed, 15 Oct 2014 10:23:05 -0700 Subject: ARM: dts: rockchip: add reset for CPU nodes This patch add reset for CPU nodes to use the reset controller. Signed-off-by: Kever Yang Tested-by: Kevin Hilman Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index e3b8b4dfc631..6ffd0fb18971 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -53,6 +53,7 @@ device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x500>; + resets = <&cru SRST_CORE0>; operating-points = < /* KHz uV */ 1608000 1350000 @@ -75,16 +76,19 @@ device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x501>; + resets = <&cru SRST_CORE1>; }; cpu@502 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x502>; + resets = <&cru SRST_CORE2>; }; cpu@503 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x503>; + resets = <&cru SRST_CORE3>; }; }; -- cgit v1.2.3 From b324fa60ac94b9c00c59f621743715c036d134fa Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:07:09 +0200 Subject: ARM: mvebu: armada-xp: Consolidate pinctrl node All current Armada XP SoCs have their pin controller at 0x18000/0x38. Move the common properties of pinctrl nodes to armada-xp.dtsi to allow to share pinctrl settings later. Signed-off-by: Sebastian Hesselbarth Acked-by: Thomas Petazzoni Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 7 ------- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 7 ------- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 7 ------- arch/arm/boot/dts/armada-xp.dtsi | 10 ++++++++++ 4 files changed, 10 insertions(+), 21 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 2592e1c13560..b5933aa9ab50 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -169,13 +169,6 @@ internal-regs { pinctrl { compatible = "marvell,mv78230-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; - }; }; gpio0: gpio@18100 { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 480e237a870f..5954b362180c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -253,13 +253,6 @@ internal-regs { pinctrl { compatible = "marvell,mv78260-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; - }; }; gpio0: gpio@18100 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 2c7b1fef4703..735924d62e12 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -291,13 +291,6 @@ internal-regs { pinctrl { compatible = "marvell,mv78460-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; - }; }; gpio0: gpio@18100 { diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index e1707133ee18..4010eee93df7 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -72,6 +72,16 @@ status = "disabled"; }; + pinctrl { + reg = <0x18000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; + }; + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x500>; -- cgit v1.2.3 From 264a05e19bf50f93f1a377e16497a626ae9f931e Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:12:00 +0200 Subject: ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address In other MVEBU SoCs, the pin controller node is called pin-ctrl with its base address added. Also, we have a node alias to access the pinctrl node easily. Fix this for Armada XP pinctrl nodes to be consistent with other SoCs. Signed-off-by: Sebastian Hesselbarth Acked-by: Thomas Petazzoni Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 2 +- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 2 +- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +- arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 2 +- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +- arch/arm/boot/dts/armada-xp.dtsi | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index a55a97a70505..546016148283 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -60,7 +60,7 @@ }; internal-regs { - pinctrl { + pinctrl: pin-ctrl@18000 { pinctrl-0 = <&pmx_phy_int>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 469cf7137595..baa43a004299 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -51,7 +51,7 @@ }; internal-regs { - pinctrl { + pinctrl: pin-ctrl@18000 { poweroff_pin: poweroff-pin { marvell,pins = "mpp24"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index b5933aa9ab50..e24ef072b8cb 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -167,7 +167,7 @@ }; internal-regs { - pinctrl { + pinctrl: pin-ctrl@18000 { compatible = "marvell,mv78230-pinctrl"; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 5954b362180c..53dfb157b91a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -251,7 +251,7 @@ }; internal-regs { - pinctrl { + pinctrl: pin-ctrl@18000 { compatible = "marvell,mv78260-pinctrl"; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 735924d62e12..8b4ab0a5d620 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -289,7 +289,7 @@ }; internal-regs { - pinctrl { + pinctrl: pin-ctrl@18000 { compatible = "marvell,mv78460-pinctrl"; }; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index e3a8c456bb84..e7949f482529 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -55,7 +55,7 @@ }; internal-regs { - pinctrl { + pinctrl: pin-ctrl@18000 { poweroff: poweroff { marvell,pins = "mpp42"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 4e5a59ee1501..394f085751be 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -77,7 +77,7 @@ serial@12100 { status = "okay"; }; - pinctrl { + pinctrl: pin-ctrl@18000 { led_pins: led-pins-0 { marvell,pins = "mpp49", "mpp51", "mpp53"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 4010eee93df7..aea7feecd953 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -72,7 +72,7 @@ status = "disabled"; }; - pinctrl { + pinctrl: pin-ctrl@18000 { reg = <0x18000 0x38>; sdio_pins: sdio-pins { -- cgit v1.2.3 From 01c434225ee67388711e78166cfe9b159e34fc9d Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:20:09 +0200 Subject: ARM: mvebu: armada-xp: Use pinctrl node alias Armada XP pinctrl node gained an alias, make use of it. Signed-off-by: Sebastian Hesselbarth Acked-by: Thomas Petazzoni Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 68 +++++----- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 62 ++++----- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 8 +- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 +- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 8 +- arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 164 +++++++++++------------ arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 14 +- 7 files changed, 167 insertions(+), 165 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 546016148283..cdab007fbaf4 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -60,40 +60,6 @@ }; internal-regs { - pinctrl: pin-ctrl@18000 { - pinctrl-0 = <&pmx_phy_int>; - pinctrl-names = "default"; - - pmx_ge0: pmx-ge0 { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp6", "mpp7", - "mpp8", "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", - "mpp16", "mpp17", "mpp18", "mpp19", - "mpp20", "mpp21", "mpp22", "mpp23"; - marvell,function = "ge1"; - }; - - pmx_keys: pmx-keys { - marvell,pins = "mpp33"; - marvell,function = "gpio"; - }; - - pmx_spi: pmx-spi { - marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; - marvell,function = "spi"; - }; - - pmx_phy_int: pmx-phy-int { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; - }; - serial@12000 { status = "okay"; }; @@ -162,3 +128,37 @@ }; }; }; + +&pinctrl { + pinctrl-0 = <&pmx_phy_int>; + pinctrl-names = "default"; + + pmx_ge0: pmx-ge0 { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + pmx_spi: pmx-spi { + marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; + marvell,function = "spi"; + }; + + pmx_phy_int: pmx-phy-int { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index baa43a004299..492cd8e3f424 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -51,37 +51,6 @@ }; internal-regs { - pinctrl: pin-ctrl@18000 { - poweroff_pin: poweroff-pin { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - power_button_pin: power-button-pin { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - reset_button_pin: reset-button-pin { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - select_button_pin: select-button-pin { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - scroll_button_pin: scroll-button-pin { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - hdd_led_pin: hdd-led-pin { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - }; - serial@12000 { status = "okay"; }; @@ -282,3 +251,34 @@ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; }; }; + +&pinctrl { + poweroff_pin: poweroff-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + select_button_pin: select-button-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + scroll_button_pin: scroll-button-pin { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + hdd_led_pin: hdd-led-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index e24ef072b8cb..281ccd24295c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -167,10 +167,6 @@ }; internal-regs { - pinctrl: pin-ctrl@18000 { - compatible = "marvell,mv78230-pinctrl"; - }; - gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; @@ -195,3 +191,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv78230-pinctrl"; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 53dfb157b91a..d7a8d0b0f385 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -251,10 +251,6 @@ }; internal-regs { - pinctrl: pin-ctrl@18000 { - compatible = "marvell,mv78260-pinctrl"; - }; - gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; @@ -298,3 +294,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv78260-pinctrl"; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 8b4ab0a5d620..9c40c130d11a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -289,10 +289,6 @@ }; internal-regs { - pinctrl: pin-ctrl@18000 { - compatible = "marvell,mv78460-pinctrl"; - }; - gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; @@ -336,3 +332,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv78460-pinctrl"; +}; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index e7949f482529..d81430aa4ab3 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -55,88 +55,6 @@ }; internal-regs { - pinctrl: pin-ctrl@18000 { - poweroff: poweroff { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - power_button_pin: power-button-pin { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - reset_button_pin: reset-button-pin { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - sata1_led_pin: sata1-led-pin { - marvell,pins = "mpp31"; - marvell,function = "gpio"; - }; - - sata2_led_pin: sata2-led-pin { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - - sata3_led_pin: sata3-led-pin { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - sata4_led_pin: sata4-led-pin { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - sata1_power_pin: sata1-power-pin { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - sata2_power_pin: sata2-power-pin { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - - sata3_power_pin: sata3-power-pin { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - - sata4_power_pin: sata4-power-pin { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - sata1_pres_pin: sata1-pres-pin { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; - - sata2_pres_pin: sata2-pres-pin { - marvell,pins = "mpp33"; - marvell,function = "gpio"; - }; - - sata3_pres_pin: sata3-pres-pin { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - - sata4_pres_pin: sata4-pres-pin { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - - err_led_pin: err-led-pin { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - }; - /* Two rear eSATA ports */ sata@a0000 { nr-ports = <2>; @@ -334,3 +252,85 @@ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; }; + +&pinctrl { + poweroff: poweroff { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + sata3_led_pin: sata3-led-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + sata4_led_pin: sata4-led-pin { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + sata1_power_pin: sata1-power-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + sata2_power_pin: sata2-power-pin { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + + sata3_power_pin: sata3-power-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + sata4_power_pin: sata4-power-pin { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + sata1_pres_pin: sata1-pres-pin { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + sata2_pres_pin: sata2-pres-pin { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + sata3_pres_pin: sata3-pres-pin { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + sata4_pres_pin: sata4-pres-pin { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + + err_led_pin: err-led-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 394f085751be..6f6b0916df48 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -77,12 +77,7 @@ serial@12100 { status = "okay"; }; - pinctrl: pin-ctrl@18000 { - led_pins: led-pins-0 { - marvell,pins = "mpp49", "mpp51", "mpp53"; - marvell,function = "gpio"; - }; - }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -187,3 +182,10 @@ }; }; }; + +&pinctrl { + led_pins: led-pins-0 { + marvell,pins = "mpp49", "mpp51", "mpp53"; + marvell,function = "gpio"; + }; +}; -- cgit v1.2.3 From e59451432d7e0f7953e29c15e70111dfdbecc145 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:24:34 +0200 Subject: ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII Pinctrl settings for GE0 and GE1 are not only usable on RD-AXPWiFiAP. Moreover, naming the RGMII settings pmx-ge{0,1} is not precise enough as there is also a GMII setting for GE0. Move the pinctrl sub-nodes to the common pinctrl node and rename them to pmx-ge{0,1}-rgmii. Signed-off-by: Sebastian Hesselbarth Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 18 ++---------------- arch/arm/boot/dts/armada-xp.dtsi | 16 ++++++++++++++++ 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index cdab007fbaf4..0e53fad111de 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -84,14 +84,14 @@ }; ethernet@70000 { - pinctrl-0 = <&pmx_ge0>; + pinctrl-0 = <&pmx_ge0_rgmii>; pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { - pinctrl-0 = <&pmx_ge1>; + pinctrl-0 = <&pmx_ge1_rgmii>; pinctrl-names = "default"; status = "okay"; phy = <&phy1>; @@ -133,20 +133,6 @@ pinctrl-0 = <&pmx_phy_int>; pinctrl-names = "default"; - pmx_ge0: pmx-ge0 { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp6", "mpp7", - "mpp8", "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", - "mpp16", "mpp17", "mpp18", "mpp19", - "mpp20", "mpp21", "mpp22", "mpp23"; - marvell,function = "ge1"; - }; - pmx_keys: pmx-keys { marvell,pins = "mpp33"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index aea7feecd953..06f25e2e0dd8 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -75,6 +75,22 @@ pinctrl: pin-ctrl@18000 { reg = <0x18000 0x38>; + pmx_ge0_rgmii: pmx-ge0-rgmii { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1_rgmii: pmx-ge1-rgmii { + marvell,pins = + "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + sdio_pins: sdio-pins { marvell,pins = "mpp30", "mpp31", "mpp32", "mpp33", "mpp34", "mpp35"; -- cgit v1.2.3 From 7254f6c52b5da38c0a79ab953d34e556fe16942f Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:27:55 +0200 Subject: ARM: mvebu: armada-xp: Add GE0 pinctrl settings for GMII There is a GMII setting for GE0, add it to the common pinctrl node. Signed-off-by: Sebastian Hesselbarth Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 06f25e2e0dd8..a3919b644737 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -75,6 +75,17 @@ pinctrl: pin-ctrl@18000 { reg = <0x18000 0x38>; + pmx_ge0_gmii: pmx-ge0-gmii { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11", + "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge0"; + }; + pmx_ge0_rgmii: pmx-ge0-rgmii { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", -- cgit v1.2.3 From c06cf0a2c67710dc9dbf760c05c7c5b47b3b6aca Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:29:27 +0200 Subject: ARM: mvebu: armada-xp: Add RGMII pinctrl to Lenovo ix4-300d Lenovo ix4-300d has two ethernet PHYs connected via RGMII. Add the corresponding pinctrl settings. Signed-off-by: Sebastian Hesselbarth Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 492cd8e3f424..c5ee6c00766c 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -66,12 +66,16 @@ }; ethernet@70000 { + pinctrl-0 = <&pmx_ge0_rgmii>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&pmx_ge1_rgmii>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; -- cgit v1.2.3 From 7207cef47dcd28b2f2fdfe9dc2e1fb5b5eeea75b Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:34:11 +0200 Subject: ARM: mvebu: armada-xp: Add I2C eeprom on Lenovo ix4-300d There is an I2C eeprom connected on Lenovo ix4-300d, add the corresponding node. Signed-off-by: Sebastian Hesselbarth Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index c5ee6c00766c..1a85014a6268 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -98,6 +98,11 @@ reg = <0x2e>; }; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + pcf8563@51 { compatible = "nxp,pcf8563"; reg = <0x51>; -- cgit v1.2.3 From f5ed9ccc4c2dc275a13b765c88fa13211f60b57f Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 19 Sep 2014 21:41:37 +0200 Subject: ARM: mvebu: armada-xp: Fix 74hc595 count for Lenovo ix4-300d There is only one 74hc595 connected to GPIO but two were given in the registers-number property. Fix it up. Signed-off-by: Sebastian Hesselbarth Tested-By: Benoit Masson Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 1a85014a6268..aa5463c91924 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -204,7 +204,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0>; - registers-number = <2>; + registers-number = <1>; spi-max-frequency = <100000>; }; }; -- cgit v1.2.3 From dd4f25a3ed55cc4c429869e522ee57ed05cce821 Mon Sep 17 00:00:00 2001 From: Jiri Prchal Date: Mon, 13 Oct 2014 11:02:16 +0200 Subject: ARM: at91: at91sam9x5 dt: add usart dma definitions to dt This patch adds usart dma definitions to both dtsi for sam9x5 chips. Without usage of dma it's unable to catch all bytes on usart receiver. Signed-off-by: Jiri Prchal Acked-by: Ludovic Desroches Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 12 ++++++++++++ arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 3 +++ 2 files changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 726274f7959b..bbb3ba65165f 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -860,6 +860,9 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&mck>; clock-names = "usart"; status = "disabled"; @@ -871,6 +874,9 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart0_clk>; clock-names = "usart"; status = "disabled"; @@ -882,6 +888,9 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart1_clk>; clock-names = "usart"; status = "disabled"; @@ -893,6 +902,9 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart2_clk>; clock-names = "usart"; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 140217a54384..43bb5b51caa6 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -57,6 +57,9 @@ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; clocks = <&usart3_clk>; clock-names = "usart"; status = "disabled"; -- cgit v1.2.3 From 5563d3489692a7f4239aca78b95d2a05a21d0d6a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 21 Oct 2014 18:47:42 +0200 Subject: ARM: at91/dt/trivial: at91sam9x5_can.dtsi: comment and whitespace fixes Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5_can.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi index f44ab7702a12..ebe4147529bb 100644 --- a/arch/arm/boot/dts/at91sam9x5_can.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -1,5 +1,5 @@ /* - * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 * Ethernet interface. * * Copyright (C) 2013 Boris BREZILLON @@ -20,10 +20,10 @@ reg = <29>; }; - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <30>; - }; + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <30>; + }; }; }; }; -- cgit v1.2.3 From 316a88da4c327931958f92c4b2f1ee268215fc1b Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 7 Oct 2014 13:51:50 +0200 Subject: ARM: at91/dt: at91sam9x5: Add CAN device nodes Add the missing CAN devices node including their pin muxing to the shared .dtsi for at91sam9x5. Actually include this file. Signed-off-by: Alexander Stein Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x25.dtsi | 1 + arch/arm/boot/dts/at91sam9x35.dtsi | 1 + arch/arm/boot/dts/at91sam9x5_can.dtsi | 40 +++++++++++++++++++++++++++++++++++ 3 files changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index c2554219f7a4..3c5fa3388997 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -10,6 +10,7 @@ #include "at91sam9x5_usart3.dtsi" #include "at91sam9x5_macb0.dtsi" #include "at91sam9x5_macb1.dtsi" +#include "at91sam9x5_can.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index 8eac66ce0ab7..499cdc81f4c0 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -8,6 +8,7 @@ #include "at91sam9x5.dtsi" #include "at91sam9x5_macb0.dtsi" +#include "at91sam9x5_can.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi index ebe4147529bb..8eb2f9c1b978 100644 --- a/arch/arm/boot/dts/at91sam9x5_can.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -26,6 +26,46 @@ }; }; }; + + can0: can@f8000000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8000000 0x300>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + clocks = <&can0_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8004000 0x300>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + clocks = <&can1_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + + pinctrl@fffff400 { + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + ; /* CANTX0, conflicts with DTXD */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + ; /* CANTX1, conflicts with TXD1 */ + }; + }; + }; }; }; }; -- cgit v1.2.3 From 2667c6adfcf686e8c5a5b56e8c7c65af001df2cb Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 6 Oct 2014 14:40:07 +0200 Subject: ARM: at91/dt: at91sam9263: Add CAN device nodes Add the missing CAN devices node including their pin muxing. The required clock node already exists. Signed-off-by: Alexander Stein Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9263.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 51416c7d0625..653e4395b7cb 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -677,6 +677,14 @@ }; }; + can { + pinctrl_can_rx_tx: can_rx_tx { + atmel,pins = + ; /* CANTX, conflicts with PCK0 */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -905,6 +913,17 @@ clock-names = "pwm_clk"; status = "disabled"; }; + + can: can@fffac000 { + compatible = "atmel,at91sam9263-can"; + reg = <0xfffac000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_rx_tx>; + clocks = <&can_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; }; fb0: fb@0x00700000 { -- cgit v1.2.3 From 148ebf479aa207406f8208466b3e446f9cd25f4b Mon Sep 17 00:00:00 2001 From: Koji Matsuoka Date: Thu, 30 Oct 2014 14:58:55 +0900 Subject: ARM: shmobile: r8a7794: Add VIN clock to device tree Signed-off-by: Koji Matsuoka Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 6 +++--- include/dt-bindings/clock/r8a7794-clock.h | 2 ++ 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 088e79c6551c..95f656d22fde 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -517,13 +517,13 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&p_clk>; + clocks = <&zg_clk>, <&zg_clk>, <&p_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7794_CLK_ETHER + R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER >; clock-output-names = - "ether"; + "vin1", "vin0", "ether"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index 9ac1043e25bc..fd7cdee6a666 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -61,6 +61,8 @@ #define R8A7794_CLK_SCIF0 21 /* MSTP8 */ +#define R8A7794_CLK_VIN1 10 +#define R8A7794_CLK_VIN0 11 #define R8A7794_CLK_ETHER 13 /* MSTP9 */ -- cgit v1.2.3 From 13aec8e419ac1b02610fd7d550121bf286a3cf24 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 3 Nov 2014 16:48:16 -0800 Subject: ARM: dts: Use better omap GPMC timings for LAN9220 With the GPMC warnings now enabled, I noticed the LAN9220 timings can overflow the GPMC registers with 200MHz L3 speed. Earlier we were just skipping the bad timings and would continue with the bootloader timings. Now we no longer allow to continue with bad timings as we have the timings in the .dts files. We could start using the GPMC clock divider, but let's instead use the u-boot timings that are known to be working and a bit faster. These are basically the u-boot NET_GPMC_CONFIG[1-6] defines deciphered. Except that we don't set gpmc,burst-length as that's only partially configured and does not seem to work if fully enabled. [tony@atomide.com: updated to remove gpmc,burst-length] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 41 +++++++++++++++++-------------- arch/arm/boot/dts/omap3-sb-t35.dtsi | 41 +++++++++++++++++-------------- 2 files changed, 46 insertions(+), 36 deletions(-) diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index 521c587acaee..445fafc73254 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -23,24 +23,29 @@ ethernet@gpmc { compatible = "smsc,lan9221", "smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; - gpmc,cs-on-ns = <1>; - gpmc,cs-rd-off-ns = <180>; - gpmc,cs-wr-off-ns = <180>; - gpmc,adv-rd-off-ns = <18>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <144>; - gpmc,page-burst-access-ns = <24>; - gpmc,bus-turnaround-ns = <90>; - gpmc,cycle2cycle-delay-ns = <90>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; + gpmc,device-width = <1>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cs-on-ns = <5>; + gpmc,cs-rd-off-ns = <150>; + gpmc,cs-wr-off-ns = <150>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <15>; + gpmc,adv-wr-off-ns = <40>; + gpmc,oe-on-ns = <45>; + gpmc,oe-off-ns = <140>; + gpmc,we-on-ns = <45>; + gpmc,we-off-ns = <140>; + gpmc,rd-cycle-ns = <155>; + gpmc,wr-cycle-ns = <155>; + gpmc,access-ns = <120>; + gpmc,page-burst-access-ns = <20>; + gpmc,bus-turnaround-ns = <75>; + gpmc,cycle2cycle-delay-ns = <75>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; vddvario-supply = <&vddvario>; vdd33a-supply = <&vdd33a>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index d59e3de1441e..28e16a6ce4bd 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -22,24 +22,29 @@ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; reg = <4 0 0xff>; bank-width = <2>; - gpmc,mux-add-data; - gpmc,cs-on-ns = <1>; - gpmc,cs-rd-off-ns = <180>; - gpmc,cs-wr-off-ns = <180>; - gpmc,adv-rd-off-ns = <18>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <144>; - gpmc,page-burst-access-ns = <24>; - gpmc,bus-turnaround-ns = <90>; - gpmc,cycle2cycle-delay-ns = <90>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; + gpmc,device-width = <1>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cs-on-ns = <5>; + gpmc,cs-rd-off-ns = <150>; + gpmc,cs-wr-off-ns = <150>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <15>; + gpmc,adv-wr-off-ns = <40>; + gpmc,oe-on-ns = <45>; + gpmc,oe-off-ns = <140>; + gpmc,we-on-ns = <45>; + gpmc,we-off-ns = <140>; + gpmc,rd-cycle-ns = <155>; + gpmc,wr-cycle-ns = <155>; + gpmc,access-ns = <120>; + gpmc,page-burst-access-ns = <20>; + gpmc,bus-turnaround-ns = <75>; + gpmc,cycle2cycle-delay-ns = <75>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; vddvario-supply = <&vddvario>; vdd33a-supply = <&vdd33a>; reg-io-width = <4>; -- cgit v1.2.3 From 24f284af1a64a1a073b064428cafb447aff19a21 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 3 Nov 2014 17:42:16 -0800 Subject: ARM: dts: Fix missing GPMC NAND device width for omap3 boards Looks like we have some GPMC NAND timings missing device width. This fixes "gpmc_cs_program_settings: invalid width 0!" errors during boot. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-evm-37xx.dts | 1 + arch/arm/boot/dts/omap3-igep0020.dts | 1 + arch/arm/boot/dts/omap3-igep0030.dts | 1 + arch/arm/boot/dts/omap3-ldp.dts | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index f73385bb237a..16e8ce350dda 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -161,6 +161,7 @@ linux,mtd-name= "hynix,h8kds0un0mer-4em"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; + gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index ff0b11d95e08..cc9343e836c6 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -204,6 +204,7 @@ linux,mtd-name= "micron,mt29c4g96maz"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; + gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index fd7ed712d506..84b74527c544 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -61,6 +61,7 @@ linux,mtd-name= "micron,mt29c4g96maz"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; + gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 37d305aebc5b..202f95a5a383 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -103,6 +103,7 @@ linux,mtd-name= "micron,nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; + gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; -- cgit v1.2.3 From 5012e8fcf3989ef3654a3139797f9b7c54230e55 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: olinuxino lime: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: FUKAUMI Naoki --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 1eb8175959a6..3f3ff9693992 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -4,12 +4,48 @@ * Copyright 2014 - Hans de Goede * Copyright (c) 2014 FUKAUMI Naoki * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From efa66b3074118600dc554b161dfb471abd194b36 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 9 Oct 2014 16:29:17 +0300 Subject: ARM: dts: k2e-evm: add 1g ethernet phys nodes Keystone K2E-EVM has two 1G Marvell 88E1514 Ethernet PHYs installed, which are compatible with 88E1510. Hence, add corresponding child nodes for 1G MDIO bus. For more information see: https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html Signed-off-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/k2e-evm.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index c568f067604d..560d62150ade 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -139,3 +139,15 @@ }; }; }; + +&mdio { + ethphy0: ethernet-phy@0 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; -- cgit v1.2.3 From 469fddd81c6df6d6fef26dabe70d7d9b7cbb5511 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 9 Oct 2014 16:32:57 +0300 Subject: ARM: dts: k2l-evm: add 1g ethernet phys nodes Keystone K2L-EVM has two 1G Marvell 88E1514 Ethernet PHYs installed, which are compatible with 88E1510. Hence, add corresponding child nodes for 1G MDIO bus. For more information see: https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html Signed-off-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/k2l-evm.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index fec43128a2e0..85cc7f2872d7 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -116,3 +116,15 @@ }; }; }; + +&mdio { + ethphy0: ethernet-phy@0 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; -- cgit v1.2.3 From bed80507e1c80fa749d84a3da8aa92e712c6a81e Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Wed, 29 Oct 2014 16:28:16 -0400 Subject: ARM: dts: keystone: add DT bindings for PCI controller for port 0 Add common DT bindings to support PCI controller driver for port 0 on all of the K2 SoCs that has Synopsis Designware based pcie h/w. Signed-off-by: Murali Karicheri Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/keystone.dtsi | 45 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 5d3e83fa2242..c06542b2c954 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -285,5 +285,50 @@ #interrupt-cells = <1>; ti,syscon-dev = <&devctrl 0x2a0>; }; + + pcie@21800000 { + compatible = "ti,keystone-pcie", "snps,dw-pcie"; + clocks = <&clkpcie>; + clock-names = "pcie"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; + ranges = <0x81000000 0 0 0x23250000 0 0x4000 + 0x82000000 0 0x50000000 0x50000000 0 0x10000000>; + + device_type = "pci"; + num-lanes = <2>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */ + <0 0 0 2 &pcie_intc0 1>, /* INT B */ + <0 0 0 3 &pcie_intc0 2>, /* INT C */ + <0 0 0 4 &pcie_intc0 3>; /* INT D */ + + pcie_msi_intc0: msi-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + pcie_intc0: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + }; }; }; -- cgit v1.2.3 From fc89a576006794f06f7b2919131f6e3e07af5b92 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Wed, 29 Oct 2014 16:28:17 -0400 Subject: ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1 K2E SoC has a second PCI port based on Synopsis Designware PCIe h/w. Add DT bindings to support PCI controller for port 1 for this SoC. Signed-off-by: Murali Karicheri Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/k2e.dtsi | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index c358b4b9a073..5fc14683d6df 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -85,6 +85,51 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x240>; }; + + pcie@21020000 { + compatible = "ti,keystone-pcie","snps,dw-pcie"; + clocks = <&clkpcie1>; + clock-names = "pcie"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; + ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 + 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + + device_type = "pci"; + num-lanes = <2>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */ + <0 0 0 2 &pcie_intc1 1>, /* INT B */ + <0 0 0 3 &pcie_intc1 2>, /* INT C */ + <0 0 0 4 &pcie_intc1 3>; /* INT D */ + + pcie_msi_intc1: msi-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + pcie_intc1: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + }; }; }; -- cgit v1.2.3 From 0b3a0ef613538cae4b8b8f41315ef1fd3c957b12 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Tue, 4 Nov 2014 17:21:24 +0100 Subject: ARM: shmobile: r8a73a4: fix scifb* naming Ports are named scifb0-3, not scifb2-5. Signed-off-by: Ulrich Hecht Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index c17afef92e8d..5c75c918e9f5 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -263,14 +263,14 @@ status = "disabled"; }; - scifb2: serial@e6c20000 { + scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - scifb3: serial@e6c30000 { + scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; @@ -291,14 +291,14 @@ status = "disabled"; }; - scifb4: serial@e6ce0000 { + scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - scifb5: serial@e6cf0000 { + scifb3: serial@e6cf0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6cf0000 0 0x100>; interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From 89aeff9989e87bb2d9d652994010bc18c68675d9 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 4 Nov 2014 13:23:38 +0900 Subject: ARM: shmobile: alt dts: Drop console= bootargs parameter Alt is booted from DT, so chosen/stdout-path is always used, and we can drop the "console=" parameter from chosen/bootargs. This change has a side-effect of changing the console speed from 38400 to 115200. This is intentional as 115200 is consistently used on all other shmobile boards. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-alt.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 8aec51268b7d..f2cf7576bf3f 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = &scif2; }; -- cgit v1.2.3 From a35070ddde21441574f1f67a0dc2012864345c30 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede Acked-by: Zoltan HERPAI --- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 46 +++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 6675bcd7860e..ce5994597407 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -2,12 +2,48 @@ * Copyright 2014 Zoltan HERPAI * Zoltan HERPAI * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From ca4ee84ccac71eb05fe3bedff9283cf52d4b4aa7 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: pcduino3: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Zoltan HERPAI --- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 46 ++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 046dfc0d45d8..8dca49b2477b 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -2,12 +2,48 @@ * Copyright 2014 Zoltan HERPAI * Zoltan HERPAI * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 7cae068bb1c76c0562c6afe9ff2af876c0f1f7f4 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Mon, 3 Nov 2014 10:53:29 +0800 Subject: ARM: dts: rk3288: add VOP iommu nodes Add device nodes for the VOP iommus. Device nodes for other iommus will be added in later patches. The iommu nodes use the #iommu-cells property as described in: Documentation/devicetree/bindings/iommu/iommu.txt Signed-off-by: Daniel Kurtz Signed-off-by: Simon Xue Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 6ffd0fb18971..0f50d5d44345 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -535,6 +535,24 @@ status = "disabled"; }; + vopb_mmu: iommu@ff930300 { + compatible = "rockchip,iommu"; + reg = <0xff930300 0x100>; + interrupts = ; + interrupt-names = "vopb_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + + vopl_mmu: iommu@ff940300 { + compatible = "rockchip,iommu"; + reg = <0xff940300 0x100>; + interrupts = ; + interrupt-names = "vopl_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; -- cgit v1.2.3 From 07cc65e3ddcb7d54b3796c5bba037fccc6cb9b90 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Nov 2014 09:03:58 +0100 Subject: ARM: update Nomadik config This updates the Nomadik (NHK8815) defconfig to what saveconfig produces after some recent changes to Kconfig fragments here and there. Signed-off-by: Linus Walleij --- arch/arm/configs/nhk8815_defconfig | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 263ae3869e32..783f44c0dfc6 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -20,7 +20,6 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -57,14 +56,12 @@ CONFIG_MTD_NAND_FSMC=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y @@ -89,15 +86,12 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_NOMADIK=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y -CONFIG_I2C_NOMADIK=y CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set CONFIG_REGULATOR=y CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y @@ -125,12 +119,12 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y +CONFIG_DEBUG_INFO=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_DES=y -- cgit v1.2.3 From 640e2f13cadba313a0dd3f83136afec09ad407c4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Nov 2014 09:06:22 +0100 Subject: ARM: nomadik: configure in STMPE support This enables the STMPE MFD, GPIO and keypad support by default on the Nomadik builds. This expander is used on the NDK 15 board. Signed-off-by: Linus Walleij --- arch/arm/configs/nhk8815_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 783f44c0dfc6..7d2ad30d9e70 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -80,6 +80,7 @@ CONFIG_PPP_SYNC_TTY=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_STMPE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set @@ -89,7 +90,9 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_STMPE=y # CONFIG_HWMON is not set +CONFIG_MFD_STMPE=y CONFIG_REGULATOR=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set -- cgit v1.2.3 From faaf348ef468389b1ee4cfe91bcea1c22fe2d9b2 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 7 Nov 2014 08:10:12 +0900 Subject: ARM: dts: Add board dts file for exynos3250-rinato This patch adds support for device tree source for Samsung Rinato board (Gear 2) based on Exynos3250 SoC. This dts file support following features: - eMMC - Main PMIC (Samsung S2MPS14) - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) - RTC of Exynos3250 - ADC of Exynos3250 with NTC thermistor - I2S of Exynos3250 - TMU of Exynos3250 - MFC of Exynos3250 - Secure firmware for Exynos3250 secondary cpu boot - Serial ports of Exynos3250 - gpio-key for power key Signed-off-by: Chanwoo Choi Signed-off-by: Inki Dae Signed-off-by: Seung-Woo Kim Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/exynos3250-rinato.dts | 424 ++++++++++++++++++++++++++++++++ 2 files changed, 426 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/exynos3250-rinato.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4a75e293cd40..91cd4d08b7f1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -67,7 +67,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb -dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ +dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \ + exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts new file mode 100644 index 000000000000..8a18e68707f1 --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -0,0 +1,424 @@ +/* + * Samsung's Exynos3250 based Rinato board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Rinato board which is based on + * Samsung Exynos3250 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos3250.dtsi" +#include + +/ { + model = "Samsung Rinato board"; + compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + i2c7 = &i2c_max77836; + }; + + memory { + reg = <0x40000000 0x1ff00000>; + }; + + chosen { + bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p15 rootwait earlyprintk panic=5"; + }; + + firmware@0205F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0205F000 0x1000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power_key { + interrupt-parent = <&gpx2>; + interrupts = <7 0>; + gpios = <&gpx2 7 1>; + linux,code = ; + label = "power key"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + i2c_max77836: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 2 0>, <&gpd0 3 0>; + #address-cells = <1>; + #size-cells = <0>; + + max77836: subpmic@25 { + compatible = "maxim,max77836"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + reg = <0x25>; + wakeup; + + muic: max77836-muic { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + safeout_reg: SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <45000>; + regulator-max-microamp = <475000>; + regulator-boot-on; + }; + + motor_reg: LDO1 { + regulator-name = "MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + }; + + LDO2 { + regulator-name = "UNUSED_LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + assigned-clocks = <&cmu CLK_SCLK_TSADC>; + assigned-clock-rates = <6000000>; + + thermistor-ap { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <100000>; + io-channels = <&adc 0>; + }; + + thermistor-battery { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <100000>; + io-channels = <&adc 1>; + }; +}; + +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; + + s2mps14_pmic@66 { + compatible = "samsung,s2mps14-pmic"; + interrupt-parent = <&gpx0>; + interrupts = <7 0>; + reg = <0x66>; + wakeup; + + s2mps14_osc: clocks { + compatible = "samsung,s2mps14-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps14_ap", "unused", + "s2mps14_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VAP_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VAP_M1_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VCC_AP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VAP_AVDD_PLL1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VAP_PLL_ISO_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VAP_VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VAP_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VAP_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "V_LPDDR_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "UNUSED_LDO10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo11_reg: LDO11 { + regulator-name = "V_EMMC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + ldo12_reg: LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_AVDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "UNUSED_LDO14"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "LCD_VDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "V_IRLED_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "CAM_AF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "LCD_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "CAM_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "CAM_DVDD_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "HRM_VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "HRM_VCC_3.3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "UNUSED_LDO25"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VAP_MIF_1.0V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VAP_ARM_1.0V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VAP_INT3D_1.0V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VCC_SUB_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_1 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max77836-battery"; + interrupt-parent = <&gpx1>; + interrupts = <2 8>; + reg = <0x36>; + }; +}; + +&i2s2 { + status = "okay"; +}; + +&mfc { + status = "okay"; +}; + +&mshc_0 { + #address-cells = <1>; + #size-cells = <0>; + num-slots = <1>; + broken-cd; + non-removable; + cap-mmc-highspeed; + desc-num = <4>; + mmc-hs200-1_8v; + card-detect-delay = <200>; + vmmc-supply = <&ldo12_reg>; + clock-frequency = <100000000>; + clock-freq-min-max = <400000 100000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + status = "okay"; +}; + +&serial_0 { + assigned-clocks = <&cmu CLK_SCLK_UART0>; + assigned-clock-rates = <100000000>; + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&tmu { + vtmu-supply = <&ldo7_reg>; + status = "okay"; +}; + +&rtc { + clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; + clock-names = "rtc", "rtc_src"; + status = "okay"; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; -- cgit v1.2.3 From 18073d6e47f24a18c9309a14c2b8b10275afd3a0 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 7 Nov 2014 08:10:13 +0900 Subject: ARM: dts: Add sleep mode pin configuration for exynos3250-rinato This patch add sleep mode pin configuration using pinctrl subsystem to reduce leakage power-consumption of gpio pin in sleep state. Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 16 ++++ arch/arm/boot/dts/exynos3250-rinato.dts | 154 ++++++++++++++++++++++++++++++ 2 files changed, 170 insertions(+) diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi index 47b92c150f4e..5ab81c39e2c9 100644 --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -12,6 +12,22 @@ * published by the Free Software Foundation. */ +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +#define PIN_PDN_OUT0 0 +#define PIN_PDN_OUT1 1 +#define PIN_PDN_INPUT 2 +#define PIN_PDN_PREV 3 + +#define PIN_SLP(_pin, _mode, _pull) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-con-pdn = ; \ + samsung,pin-pud-pdn = ; \ + } + &pinctrl_0 { gpa0: gpa0 { gpio-controller; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 8a18e68707f1..8ad98088adbf 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -422,3 +422,157 @@ &xusbxti { clock-frequency = <24000000>; }; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-state { + PIN_SLP(gpa0-0, INPUT, DOWN); + PIN_SLP(gpa0-1, INPUT, DOWN); + PIN_SLP(gpa0-2, INPUT, DOWN); + PIN_SLP(gpa0-3, INPUT, DOWN); + PIN_SLP(gpa0-4, INPUT, DOWN); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, DOWN); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, PREV, NONE); + PIN_SLP(gpb-1, PREV, NONE); + PIN_SLP(gpb-2, PREV, NONE); + PIN_SLP(gpb-3, PREV, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, DOWN); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, DOWN); + PIN_SLP(gpc1-1, INPUT, DOWN); + PIN_SLP(gpc1-2, INPUT, DOWN); + PIN_SLP(gpc1-3, INPUT, DOWN); + PIN_SLP(gpc1-4, INPUT, DOWN); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, INPUT, DOWN); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, NONE); + PIN_SLP(gpd1-1, INPUT, NONE); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + sleep1: sleep-state { + PIN_SLP(gpe0-0, PREV, NONE); + PIN_SLP(gpe0-1, PREV, NONE); + PIN_SLP(gpe0-2, INPUT, DOWN); + PIN_SLP(gpe0-3, INPUT, UP); + PIN_SLP(gpe0-4, INPUT, DOWN); + PIN_SLP(gpe0-5, INPUT, DOWN); + PIN_SLP(gpe0-6, INPUT, DOWN); + PIN_SLP(gpe0-7, INPUT, DOWN); + + PIN_SLP(gpe1-0, INPUT, DOWN); + PIN_SLP(gpe1-1, PREV, NONE); + PIN_SLP(gpe1-2, INPUT, DOWN); + PIN_SLP(gpe1-3, INPUT, DOWN); + PIN_SLP(gpe1-4, INPUT, DOWN); + PIN_SLP(gpe1-5, INPUT, DOWN); + PIN_SLP(gpe1-6, INPUT, DOWN); + PIN_SLP(gpe1-7, INPUT, NONE); + + PIN_SLP(gpe2-0, INPUT, NONE); + PIN_SLP(gpe2-1, INPUT, NONE); + PIN_SLP(gpe2-2, INPUT, NONE); + + PIN_SLP(gpk0-0, INPUT, DOWN); + PIN_SLP(gpk0-1, INPUT, DOWN); + PIN_SLP(gpk0-2, OUT0, NONE); + PIN_SLP(gpk0-3, INPUT, DOWN); + PIN_SLP(gpk0-4, INPUT, DOWN); + PIN_SLP(gpk0-5, INPUT, DOWN); + PIN_SLP(gpk0-6, INPUT, DOWN); + PIN_SLP(gpk0-7, INPUT, DOWN); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, INPUT, DOWN); + PIN_SLP(gpk1-4, INPUT, DOWN); + PIN_SLP(gpk1-5, INPUT, DOWN); + PIN_SLP(gpk1-6, INPUT, DOWN); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, DOWN); + PIN_SLP(gpl0-2, INPUT, DOWN); + PIN_SLP(gpl0-3, INPUT, DOWN); + + PIN_SLP(gpm0-0, INPUT, DOWN); + PIN_SLP(gpm0-1, INPUT, DOWN); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, DOWN); + PIN_SLP(gpm1-3, INPUT, DOWN); + PIN_SLP(gpm1-4, INPUT, DOWN); + PIN_SLP(gpm1-5, INPUT, DOWN); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, DOWN); + PIN_SLP(gpm2-1, INPUT, DOWN); + PIN_SLP(gpm2-2, INPUT, DOWN); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, INPUT, DOWN); + PIN_SLP(gpm3-1, INPUT, DOWN); + PIN_SLP(gpm3-2, INPUT, DOWN); + PIN_SLP(gpm3-3, INPUT, DOWN); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, INPUT, DOWN); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, INPUT, DOWN); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, INPUT, DOWN); + PIN_SLP(gpm4-5, INPUT, DOWN); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + }; +}; -- cgit v1.2.3 From b9d7fdacfbca2019fce126b175c5608d74485f36 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 7 Nov 2014 08:10:13 +0900 Subject: ARM: dts: Add sleep mode of regulator for exynos3250-rinato This patch adds sleep mode of regulator for exynos3250-rinato board to optimize power-consumption in sleep state. Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Reviewed-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250-rinato.dts | 108 ++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 8ad98088adbf..84380fa13e37 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -157,6 +157,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo2_reg: LDO2 { @@ -164,6 +168,10 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo3_reg: LDO3 { @@ -171,6 +179,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo4_reg: LDO4 { @@ -178,6 +190,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -185,6 +201,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -192,6 +212,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -199,6 +223,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -206,6 +234,10 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -213,12 +245,20 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo10_reg: LDO10 { regulator-name = "UNUSED_LDO10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -239,60 +279,100 @@ regulator-name = "CAM_AVDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { regulator-name = "UNUSED_LDO14"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: LDO15 { regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo16_reg: LDO16 { regulator-name = "LCD_VDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo17_reg: LDO17 { regulator-name = "V_IRLED_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { regulator-name = "CAM_AF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { regulator-name = "LCD_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo21_reg: LDO21 { regulator-name = "CAM_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo22_reg: LDO22 { regulator-name = "CAM_DVDD_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo23_reg: LDO23 { @@ -306,12 +386,20 @@ regulator-name = "HRM_VCC_3.3V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo25_reg: LDO25 { regulator-name = "UNUSED_LDO25"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck1_reg: BUCK1 { @@ -319,6 +407,10 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -326,6 +418,10 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -333,6 +429,10 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -340,6 +440,10 @@ regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -347,6 +451,10 @@ regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; }; }; -- cgit v1.2.3 From 9246e7ff24c518ebd0fd2027ab0cd746e6bb6065 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 7 Nov 2014 08:19:24 +0900 Subject: ARM: dts: Add dts files for exynos4415 SoC This patch adds new exynos4415.dtsi to support Exynos4415 SoC based on Cortex-A9 quad cores and includes following dt nodes: - GIC interrupt controller (GIC-400) - Pinctrl to control three GPIO parts - CMU (Clock Management Unit) for CMU/CMU_DMC/AUDSS - CPU information (Cortex-A9 quad cores) - UART to support serial port - MCT (Multi Core Timer) - ADC (Analog Digital Converter) - RTC (Real Time Clock) - I2C/SPI busses - Power domains (CAM, TV, MFC, G3D, LCD0, ISP0/1) - PMU (Performance Monitoring Unit) - MSHC (Mobile Storage Host Controller) - EHCI (Enhanced Host Controller Interface) - OHIC (Open Host Controller Interface) - USB 2.0 device with hsotg - PWM (Pluse Width Modulation) Timer - AMBA bus for PDMA0/1 - SYSRAM node for memory mapping - SYSREG node for memory mapping - PMU (Power Management Unit) node for memory mapping Cc: Ben Dooks Cc: Russell King Cc: Mark Rutland Cc: Olof Johansson Cc: Arnd Bergmann Signed-off-by: Chanwoo Choi Signed-off-by: Seung-Woo Kim [m.szyprowski: Add OHCI node and correct EHCI node] Signed-off-by: Marek Szyprowski [yj44.cho: Add mipi-phy node] Signed-off-by: YoungJun Cho [jaewon02: Add EHCI and SPI_2 node] Signed-off-by: Jaewon Kim [ideal.song: Add I2S0 node for audio interface] Signed-off-by: Inha Song [tomasz.figa: Add L2 cache node] Signed-off-by: Tomasz Figa Acked-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 573 ++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos4415.dtsi | 604 ++++++++++++++++++++++++++++++ 2 files changed, 1177 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4415-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/exynos4415.dtsi diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi new file mode 100644 index 000000000000..75af9c56123e --- /dev/null +++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi @@ -0,0 +1,573 @@ +/* + * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpk0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <4>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <4>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <4>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <4>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi new file mode 100644 index 000000000000..c1c9b37340d9 --- /dev/null +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -0,0 +1,604 @@ +/* + * Samsung's Exynos4415 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415 + * based board files can include this file and provide values for board + * specific bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include +#include + +/ { + compatible = "samsung,exynos4415"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + mshc2 = &mshc_2; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@a00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xa00>; + clock-frequency = <1600000000>; + }; + + cpu1: cpu@a01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xa01>; + clock-frequency = <1600000000>; + }; + + cpu2: cpu@a02 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xa02>; + clock-frequency = <1600000000>; + }; + + cpu3: cpu@a03 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xa03>; + clock-frequency = <1600000000>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x50000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x50000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@4f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x4f000 0x1000>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,exynos4415-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 242 0>; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + sysreg_system_controller: syscon@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4415-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + + mipi_phy: video-phy@10020710 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10020710 8>; + #phy-cells = <1>; + }; + + pd_cam: cam-power-domain@10024000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10024000 0x20>; + }; + + pd_tv: tv-power-domain@10024020 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10024020 0x20>; + }; + + pd_mfc: mfc-power-domain@10024040 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10024040 0x20>; + }; + + pd_g3d: g3d-power-domain@10024060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10024060 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10024080 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10024080 0x20>; + }; + + pd_isp0: isp0-power-domain@100240A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100240A0 0x20>; + }; + + pd_isp1: isp1-power-domain@100240E0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100240E0 0x20>; + }; + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos4415-cmu"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + rtc: rtc@10070000 { + compatible = "samsung,exynos3250-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 73 0>, <0 74 0>; + status = "disabled"; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <3 2 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <1>; + arm,prefetch-offset = <7>; + }; + + cmu_dmc: clock-controller@105C0000 { + compatible = "samsung,exynos4415-cmu-dmc"; + reg = <0x105C0000 0x3000>; + #clock-cells = <1>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4415-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 225 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 48 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4415-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 240 0>; + }; + + hsotg: hsotg@12480000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0x12480000 0x20000>; + interrupts = <0 141 0>; + clocks = <&cmu CLK_USBDEVICE>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + mshc_0: mshc@12510000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12510000 0x1000>; + interrupts = <0 142 0>; + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mshc_1: mshc@12520000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12520000 0x1000>; + interrupts = <0 143 0>; + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mshc_2: mshc@12530000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12530000 0x1000>; + interrupts = <0 144 0>; + clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ehci: ehci@12580000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12580000 0x100>; + interrupts = <0 140 0>; + clocks = <&cmu CLK_USBHOST>; + clock-names = "usbhost"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; + port@1 { + reg = <1>; + phys = <&exynos_usbphy 2>; + status = "disabled"; + }; + port@2 { + reg = <2>; + phys = <&exynos_usbphy 3>; + status = "disabled"; + }; + }; + + ohci: ohci@12590000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12590000 0x100>; + interrupts = <0 140 0>; + clocks = <&cmu CLK_USBHOST>; + clock-names = "usbhost"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; + }; + + exynos_usbphy: exynos-usbphy@125B0000 { + compatible = "samsung,exynos4x12-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 138 0>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 139 0>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos3250-adc", + "samsung,exynos-adc-v2"; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + clock-names = "adc", "sclk"; + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + serial_0: serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 110 0>; + clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_2: serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 111 0>; + clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_3: serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <0 112 0>; + clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + i2c_0: i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 113 0>; + clocks = <&cmu CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 114 0>; + clocks = <&cmu CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 115 0>; + clocks = <&cmu CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 116 0>; + clocks = <&cmu CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + i2c_4: i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 117 0>; + clocks = <&cmu CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; + + i2c_5: i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 118 0>; + clocks = <&cmu CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; + + i2c_6: i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 119 0>; + clocks = <&cmu CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; + + i2c_7: i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 120 0>; + clocks = <&cmu CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 121 0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 122 0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "disabled"; + }; + + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <0 123 0>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + status = "disabled"; + }; + + clock_audss: clock-controller@03810000 { + compatible = "samsung,exynos4210-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + }; + + i2s0: i2s@3830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + interrupts = <0 124 0>; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>; + dma-names = "tx", "rx", "tx-sec"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + samsung,idma-addr = <0x03000000>; + status = "disabled"; + }; + + pwm: pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 108 0>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>; + }; + }; +}; + +#include "exynos4415-pinctrl.dtsi" -- cgit v1.2.3 From a427d15062ac46a00a22d2f0b9d05093c18ff2f1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 7 Nov 2014 08:22:49 +0900 Subject: ARM: dts: Add micro SD card SDHCI node for exynos4412-trats Add SDHCI node for supporting the micro SD card. On Trats2 board the SDHCI does not use sd2_cd pins (gpk2-2) for card detect but gpx3-4 instead. Power is supplied from LDO21 regulator which in off state is controlled by external GPIO pin. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index dd9ac66770f7..8ee20bd09557 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -563,6 +563,16 @@ cap-mmc-highspeed; }; + sdhci@12530000 { + bus-width = <4>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; + }; + serial@13800000 { status = "okay"; }; -- cgit v1.2.3 From b4607572ef86b288a856b9df410ea593c5371dec Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 28 Oct 2014 17:08:42 +0100 Subject: ARM: mvebu: remove conflicting muxing on Armada 370 DB Back when audio was enabled, the muxing of some MPP pins was causing problems. However, since commit fea038ed55ae ("ARM: mvebu: Add proper pin muxing on the Armada 370 DB board"), those problematic MPP pins have been assigned a proper muxing for the Ethernet interfaces. This proper muxing is now conflicting with the hog pins muxing that had been added as part of 249f3822509b ("ARM: mvebu: add audio support to Armada 370 DB"). Therefore, this commit simply removes the hog pins muxing, which solves a warning a boot time due to the conflicting muxing requirements. Fixes: fea038ed55ae ("ARM: mvebu: Add proper pin muxing on the Armada 370 DB board") Cc: Ezequiel Garcia Signed-off-by: Thomas Petazzoni Acked-by: Andrew Lunn Link: https://lkml.kernel.org/r/1414512524-24466-5-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index a495e5821ab8..d5051358fb1b 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -102,30 +102,6 @@ broken-cd; }; - pinctrl { - /* - * These pins might be muxed as I2S by - * the bootloader, but it conflicts - * with the real I2S pins that are - * muxed using i2s_pins. We must mux - * those pins to a function other than - * I2S. - */ - pinctrl-0 = <&hog_pins1 &hog_pins2>; - pinctrl-names = "default"; - - hog_pins1: hog-pins1 { - marvell,pins = "mpp6", "mpp8", "mpp10", - "mpp12", "mpp13"; - marvell,function = "gpio"; - }; - - hog_pins2: hog-pins2 { - marvell,pins = "mpp5", "mpp7", "mpp9"; - marvell,function = "gpo"; - }; - }; - usb@50000 { status = "okay"; }; -- cgit v1.2.3 From a6b334514be27aec1bf31c7673c2f55bd6fbd3e6 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 28 Oct 2014 17:08:43 +0100 Subject: ARM: mvebu: use simple-card DT binding for audio on Armada 370 DB This commit modifies the Armada 370 and Armada 370 DB Device Tree descriptions to use the simple-card DT binding to describe the audio complex of the Armada 370 DB instead of a custom audio machine driver. To do so, it: - Adds the sound-dai-cells properties to the CS42L51 node, the audio controller node and the SPDIF in/out nodes. - Completely changes the description of the sound complex to use the "simple-audio-card" DT binding instead of the "marvell,a370db-audio" DT binding. - Fixes the indentation to properly use tabs instead of spaces. Signed-off-by: Thomas Petazzoni Acked-by: Andrew Lunn Link: https://lkml.kernel.org/r/1414512524-24466-6-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 56 +++++++++++++++++++++++++++++++++---- arch/arm/boot/dts/armada-370.dtsi | 1 + 2 files changed, 51 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index d5051358fb1b..0b7bf5ea7bd5 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -75,6 +75,7 @@ clock-frequency = <100000>; status = "okay"; audio_codec: audio-codec@4a { + #sound-dai-cells = <0>; compatible = "cirrus,cs42l51"; reg = <0x4a>; }; @@ -143,17 +144,60 @@ }; sound { - compatible = "marvell,a370db-audio"; - marvell,audio-controller = <&audio_controller>; - marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>; - status = "okay"; + compatible = "simple-audio-card"; + simple-audio-card,name = "Armada 370 DB Audio"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Out Jack", + "Line", "In Jack"; + simple-audio-card,routing = + "Out Jack", "HPL", + "Out Jack", "HPR", + "AIN1L", "In Jack", + "AIN1L", "In Jack"; + status = "okay"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 0>; + }; + + codec { + sound-dai = <&audio_codec>; + }; + }; + + simple-audio-card,dai-link@1 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_out>; + }; + }; + + simple-audio-card,dai-link@2 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_in>; + }; + }; }; spdif_out: spdif-out { - compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; }; spdif_in: spdif-in { - compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 7851942e244a..86d33dbe52c6 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -250,6 +250,7 @@ }; audio_controller: audio-controller@30000 { + #sound-dai-cells = <1>; compatible = "marvell,armada370-audio"; reg = <0x30000 0x4000>; interrupts = <93>; -- cgit v1.2.3 From 9ef90cbb0860d3434fdc4bf9674adca1b762f95e Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 5 Nov 2014 20:02:00 +0100 Subject: mvebu: 370 RD: Add support for the switch The 370 rd has a 7 port, mv88E6182 switch, connected to eth1. Add a fixed-link subnode to the ethernet device tree node, to force gigabit/full duplex. Add a dsa node, with describing the four used ports. This requires adding an alias to the mdio node, so it can be referenced as a phandle. Signed-off-by: Andrew Lunn Link: https://lkml.kernel.org/r/1415214121-29286-3-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-rd.dts | 49 ++++++++++++++++++++++++++++++++---- arch/arm/boot/dts/armada-370-xp.dtsi | 2 +- 2 files changed, 45 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index f57a8f841498..2bb671a778db 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -85,10 +85,6 @@ phy0: ethernet-phy@0 { reg = <0>; }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; ethernet@70000 { @@ -100,8 +96,11 @@ pinctrl-0 = <&ge1_rgmii_pins>; pinctrl-names = "default"; status = "okay"; - phy = <&phy1>; phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; mvsdio@d4000 { @@ -173,4 +172,44 @@ }; }; }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð1>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 83286ec9702c..4d84ca981fe0 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -232,7 +232,7 @@ status = "disabled"; }; - mdio { + mdio: mdio { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; -- cgit v1.2.3 From dead1971d2a57f972af1b0ffeb7896a73434c628 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Emilio López Acked-by: Hans de Goede Acked-by: Olliver Schinagl Acked-by: Olof Johansson Acked-by: Roman Byshko Acked-by: Stefan Roese --- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 3ce56bfbc0b5..6a310da53f18 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -2,12 +2,48 @@ * Copyright 2012 Stefan Roese * Stefan Roese * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 5ba312c0ff940444e71f7d9dc3ed40ef2e9e27ae Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede Acked-by: Olof Johansson Acked-by: Roman Byshko --- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 429994e1943e..e31d291d14cb 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 9fb0e6e7e05371c33ee2f8c838117e58e129d72d Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Tue, 19 Aug 2014 11:00:33 +0800 Subject: ARM: dts: hix5hd2: add gmac node Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2-dkb.dts | 28 ++++++++++++++++++++++++++++ arch/arm/boot/dts/hisi-x5hd2.dtsi | 16 ++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index 05b44c272c9a..0da3f3b6721e 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -51,3 +51,31 @@ &uart0 { status = "okay"; }; + +&gmac0 { + #address-cells = <1>; + #size-cells = <0>; + phy-handle = <&phy2>; + phy-mode = "mii"; + /* Placeholder, overwritten by bootloader */ + mac-address = [00 00 00 00 00 00]; + status = "okay"; + + phy2: ethernet-phy@2 { + reg = <2>; + }; +}; + +&gmac1 { + #address-cells = <1>; + #size-cells = <0>; + phy-handle = <&phy1>; + phy-mode = "rgmii"; + /* Placeholder, overwritten by bootloader */ + mac-address = [00 00 00 00 00 00]; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index f85ba2924ff7..012525c2fa37 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -166,5 +166,21 @@ #clock-cells = <1>; }; }; + + gmac0: ethernet@1840000 { + compatible = "hisilicon,hix5hd2-gmac"; + reg = <0x1840000 0x1000>,<0x184300c 0x4>; + interrupts = <0 71 4>; + clocks = <&clock HIX5HD2_MAC0_CLK>; + status = "disabled"; + }; + + gmac1: ethernet@1841000 { + compatible = "hisilicon,hix5hd2-gmac"; + reg = <0x1841000 0x1000>,<0x1843010 0x4>; + interrupts = <0 72 4>; + clocks = <&clock HIX5HD2_MAC1_CLK>; + status = "disabled"; + }; }; }; -- cgit v1.2.3 From afecbf4153f55bd6a47bb2874824de48cd7b7421 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 20 Aug 2014 14:37:48 +0800 Subject: ARM: dts: hix5hd2: add mmc node Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 012525c2fa37..fea5d5cf3a31 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -167,6 +167,25 @@ }; }; + /* unremovable emmc as mmcblk0 */ + mmc: mmc@1830000 { + compatible = "snps,dw-mshc"; + reg = <0x1830000 0x1000>; + interrupts = <0 35 4>; + clocks = <&clock HIX5HD2_MMC_CIU_RST>, + <&clock HIX5HD2_MMC_BIU_CLK>; + clock-names = "ciu", "biu"; + }; + + sd: mmc@1820000 { + compatible = "snps,dw-mshc"; + reg = <0x1820000 0x1000>; + interrupts = <0 34 4>; + clocks = <&clock HIX5HD2_SD_CIU_RST>, + <&clock HIX5HD2_SD_BIU_CLK>; + clock-names = "ciu","biu"; + }; + gmac0: ethernet@1840000 { compatible = "hisilicon,hix5hd2-gmac"; reg = <0x1840000 0x1000>,<0x184300c 0x4>; -- cgit v1.2.3 From d1a3a0d6ad10eda4c8a8877a08cde92d855c4d94 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 20 Aug 2014 14:57:44 +0800 Subject: ARM: dts: hix5hd2: add usb node Signed-off-by: Zhangfei Gao Signed-off-by: Jiancheng Xue Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index fea5d5cf3a31..4f9e8a3da294 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -201,5 +201,19 @@ clocks = <&clock HIX5HD2_MAC1_CLK>; status = "disabled"; }; + + usb0: ehci@1890000 { + compatible = "generic-ehci"; + reg = <0x1890000 0x1000>; + interrupts = <0 66 4>; + clocks = <&clock HIX5HD2_USB_CLK>; + }; + + usb1: ohci@1880000 { + compatible = "generic-ohci"; + reg = <0x1880000 0x1000>; + interrupts = <0 67 4>; + clocks = <&clock HIX5HD2_USB_CLK>; + }; }; }; -- cgit v1.2.3 From a47f88efa1503599fb052e81d03d51c61f96c9ec Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 20 Aug 2014 15:14:39 +0800 Subject: ARM: dts: hix5hd2: add sata node Signed-off-by: Jiancheng Xue Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2-dkb.dts | 5 +++++ arch/arm/boot/dts/hisi-x5hd2.dtsi | 20 ++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index 0da3f3b6721e..721b09238f58 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -79,3 +79,8 @@ reg = <1>; }; }; + +&ahci { + phys = <&sata_phy>; + phy-names = "sata-phy"; +}; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 4f9e8a3da294..d5b3a8fd7226 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -215,5 +215,25 @@ interrupts = <0 67 4>; clocks = <&clock HIX5HD2_USB_CLK>; }; + + peripheral_ctrl: syscon@a20000 { + compatible = "syscon"; + reg = <0xa20000 0x1000>; + }; + + sata_phy: phy@1900000 { + compatible = "hisilicon,hix5hd2-sata-phy"; + reg = <0x1900000 0x10000>; + #phy-cells = <0>; + hisilicon,peripheral-syscon = <&peripheral_ctrl>; + hisilicon,power-reg = <0x8 10>; + }; + + ahci: sata@1900000 { + compatible = "hisilicon,hisi-ahci"; + reg = <0x1900000 0x10000>; + interrupts = <0 70 4>; + clocks = <&clock HIX5HD2_SATA_CLK>; + }; }; }; -- cgit v1.2.3 From 57d434656fe43d412403f6deb7dac8305b8c457c Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 20 Aug 2014 15:36:37 +0800 Subject: ARM: dts: hix5hd2: add gpio node Signed-off-by: Jiancheng Xue Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2.dtsi | 234 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index d5b3a8fd7226..7f1a3e0b3715 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -131,6 +131,240 @@ clock-names = "apb_pclk"; status = "disabled"; }; + + gpio0: gpio@b20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb20000 0x1000>; + interrupts = <0 108 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@b21000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb21000 0x1000>; + interrupts = <0 109 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@b22000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb22000 0x1000>; + interrupts = <0 110 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio3: gpio@b23000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb23000 0x1000>; + interrupts = <0 111 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio4: gpio@b24000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb24000 0x1000>; + interrupts = <0 112 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio5: gpio@004000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x004000 0x1000>; + interrupts = <0 113 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio6: gpio@b26000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb26000 0x1000>; + interrupts = <0 114 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio7: gpio@b27000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb27000 0x1000>; + interrupts = <0 115 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio8: gpio@b28000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb28000 0x1000>; + interrupts = <0 116 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio9: gpio@b29000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb29000 0x1000>; + interrupts = <0 117 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio10: gpio@b2a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb2a000 0x1000>; + interrupts = <0 118 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio11: gpio@b2b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb2b000 0x1000>; + interrupts = <0 119 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio12: gpio@b2c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb2c000 0x1000>; + interrupts = <0 120 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio13: gpio@b2d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb2d000 0x1000>; + interrupts = <0 121 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio14: gpio@b2e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb2e000 0x1000>; + interrupts = <0 122 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio15: gpio@b2f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb2f000 0x1000>; + interrupts = <0 123 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio16: gpio@b30000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb30000 0x1000>; + interrupts = <0 124 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio17: gpio@b31000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xb31000 0x1000>; + interrupts = <0 125 0x4>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clock HIX5HD2_FIXED_100M>; + clock-names = "apb_pclk"; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; }; local_timer@00a00600 { -- cgit v1.2.3 From 5d730f85fa836f0744951fd58f5f25ae146bd1c6 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 20 Aug 2014 15:38:26 +0800 Subject: ARM: dts: hix5hd2: add wdg node Signed-off-by: Jiancheng Xue Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 7f1a3e0b3715..d07589b657f4 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -365,6 +365,15 @@ #interrupt-cells = <2>; status = "disabled"; }; + + wdt0: watchdog@a2c000 { + compatible = "arm,sp805", "arm,primecell"; + arm,primecell-periphid = <0x00141805>; + reg = <0xa2c000 0x1000>; + interrupts = <0 29 4>; + clocks = <&clock HIX5HD2_WDG0_RST>; + clock-names = "apb_pclk"; + }; }; local_timer@00a00600 { -- cgit v1.2.3 From a3322d284b663160d85dde44373d84bcfc48d009 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 29 Oct 2014 14:56:58 +0800 Subject: ARM: dts: hix5hd2: add ir node Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2.dtsi | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index d07589b657f4..576d8c229c47 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -391,7 +391,7 @@ }; sysctrl: system-controller@00000000 { - compatible = "hisilicon,sysctrl"; + compatible = "hisilicon,sysctrl", "syscon"; reg = <0x00000000 0x1000>; reboot-offset = <0x4>; }; @@ -478,5 +478,13 @@ interrupts = <0 70 4>; clocks = <&clock HIX5HD2_SATA_CLK>; }; + + ir: ir@001000 { + compatible = "hisilicon,hix5hd2-ir"; + reg = <0x001000 0x1000>; + interrupts = <0 47 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + hisilicon,power-syscon = <&sysctrl>; + }; }; }; -- cgit v1.2.3 From f4d0ab1e6d4947e1220c0bab1ae22e471af954ea Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 29 Oct 2014 09:27:42 +0800 Subject: ARM: dts: hix5hd2: add i2c node Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2.dtsi | 60 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 576d8c229c47..b8deb6ce2679 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -486,5 +486,65 @@ clocks = <&clock HIX5HD2_FIXED_24M>; hisilicon,power-syscon = <&sysctrl>; }; + + i2c0: i2c@b10000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xb10000 0x1000>; + interrupts = <0 38 4>; + clocks = <&clock HIX5HD2_I2C0_RST>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@b11000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xb11000 0x1000>; + interrupts = <0 39 4>; + clocks = <&clock HIX5HD2_I2C1_RST>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@b12000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xb12000 0x1000>; + interrupts = <0 40 4>; + clocks = <&clock HIX5HD2_I2C2_RST>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@b13000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xb13000 0x1000>; + interrupts = <0 41 4>; + clocks = <&clock HIX5HD2_I2C3_RST>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@b16000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xb16000 0x1000>; + interrupts = <0 43 4>; + clocks = <&clock HIX5HD2_I2C4_RST>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@b17000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xb17000 0x1000>; + interrupts = <0 44 4>; + clocks = <&clock HIX5HD2_I2C5_RST>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; -- cgit v1.2.3 From 92cfcb26fca45aafa7eb9b8a4401a361caa88dec Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 29 Oct 2014 14:00:25 +0800 Subject: ARM: dts: hix5hd2: add reboot node Reuse syscon-reboot, drivers/power/reset/syscon-reboot.c Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- arch/arm/boot/dts/hisi-x5hd2.dtsi | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index b8deb6ce2679..c52722b14e4a 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -393,7 +393,13 @@ sysctrl: system-controller@00000000 { compatible = "hisilicon,sysctrl", "syscon"; reg = <0x00000000 0x1000>; - reboot-offset = <0x4>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&sysctrl>; + offset = <0x4>; + mask = <0xdeadbeef>; }; cpuctrl@00a22000 { -- cgit v1.2.3 From ba3240beae340bc84dad16f2b67590f32d25d5a6 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:44:51 -0800 Subject: ARM: shmobile: r8a7790: Add Audio DMAC devices to DT Instantiate the two Audio DMA controllers in the r8a7790 device tree. Signed-off-by: Kuninori Morimoto [geert: corrected spelling of audmac1] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 64 +++++++++++++++++++++++++++++-- include/dt-bindings/clock/r8a7790-clock.h | 2 + 2 files changed, 63 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 52c21569e352..2e01d4950b59 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -312,6 +312,63 @@ #dma-cells = <1>; dma-channels = <15>; }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH + 0 320 IRQ_TYPE_LEVEL_HIGH + 0 321 IRQ_TYPE_LEVEL_HIGH + 0 322 IRQ_TYPE_LEVEL_HIGH + 0 323 IRQ_TYPE_LEVEL_HIGH + 0 324 IRQ_TYPE_LEVEL_HIGH + 0 325 IRQ_TYPE_LEVEL_HIGH + 0 326 IRQ_TYPE_LEVEL_HIGH + 0 327 IRQ_TYPE_LEVEL_HIGH + 0 328 IRQ_TYPE_LEVEL_HIGH + 0 329 IRQ_TYPE_LEVEL_HIGH + 0 330 IRQ_TYPE_LEVEL_HIGH + 0 331 IRQ_TYPE_LEVEL_HIGH + 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH + 0 333 IRQ_TYPE_LEVEL_HIGH + 0 334 IRQ_TYPE_LEVEL_HIGH + 0 335 IRQ_TYPE_LEVEL_HIGH + 0 336 IRQ_TYPE_LEVEL_HIGH + 0 337 IRQ_TYPE_LEVEL_HIGH + 0 338 IRQ_TYPE_LEVEL_HIGH + 0 339 IRQ_TYPE_LEVEL_HIGH + 0 340 IRQ_TYPE_LEVEL_HIGH + 0 341 IRQ_TYPE_LEVEL_HIGH + 0 342 IRQ_TYPE_LEVEL_HIGH + 0 343 IRQ_TYPE_LEVEL_HIGH + 0 344 IRQ_TYPE_LEVEL_HIGH + 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <13>; + }; + i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -1050,10 +1107,11 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&extal_clk>, <&p_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = ; - clock-output-names = "thermal", "pwm"; + renesas,clock-indices = ; + clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index e3a3fb80feb6..c27b3b5133b9 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -78,6 +78,8 @@ #define R8A7790_CLK_USBDMAC1 31 /* MSTP5 */ +#define R8A7790_CLK_AUDIO_DMAC1 1 +#define R8A7790_CLK_AUDIO_DMAC0 2 #define R8A7790_CLK_THERMAL 22 #define R8A7790_CLK_PWM 23 -- cgit v1.2.3 From 8994fff677610e2e0aacb25c39b49739444844b0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:45:37 -0800 Subject: ARM: shmobile: r8a7791: Add Audio DMAC devices to DT Instantiate the two Audio DMA controllers in the r8a7791 device tree. Signed-off-by: Kuninori Morimoto [geert: corrected spelling of audmac1] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 63 +++++++++++++++++++++++++++++-- include/dt-bindings/clock/r8a7791-clock.h | 2 + 2 files changed, 62 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index a862243f0436..b54af745141a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -301,6 +301,62 @@ dma-channels = <15>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH + 0 320 IRQ_TYPE_LEVEL_HIGH + 0 321 IRQ_TYPE_LEVEL_HIGH + 0 322 IRQ_TYPE_LEVEL_HIGH + 0 323 IRQ_TYPE_LEVEL_HIGH + 0 324 IRQ_TYPE_LEVEL_HIGH + 0 325 IRQ_TYPE_LEVEL_HIGH + 0 326 IRQ_TYPE_LEVEL_HIGH + 0 327 IRQ_TYPE_LEVEL_HIGH + 0 328 IRQ_TYPE_LEVEL_HIGH + 0 329 IRQ_TYPE_LEVEL_HIGH + 0 330 IRQ_TYPE_LEVEL_HIGH + 0 331 IRQ_TYPE_LEVEL_HIGH + 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH + 0 333 IRQ_TYPE_LEVEL_HIGH + 0 334 IRQ_TYPE_LEVEL_HIGH + 0 335 IRQ_TYPE_LEVEL_HIGH + 0 336 IRQ_TYPE_LEVEL_HIGH + 0 337 IRQ_TYPE_LEVEL_HIGH + 0 338 IRQ_TYPE_LEVEL_HIGH + 0 339 IRQ_TYPE_LEVEL_HIGH + 0 340 IRQ_TYPE_LEVEL_HIGH + 0 341 IRQ_TYPE_LEVEL_HIGH + 0 342 IRQ_TYPE_LEVEL_HIGH + 0 343 IRQ_TYPE_LEVEL_HIGH + 0 344 IRQ_TYPE_LEVEL_HIGH + 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <13>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -1053,10 +1109,11 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&extal_clk>, <&p_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = ; - clock-output-names = "thermal", "pwm"; + renesas,clock-indices = ; + clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index dcececd9f4d0..3ea2bbc0da3f 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -69,6 +69,8 @@ #define R8A7791_CLK_USBDMAC1 31 /* MSTP5 */ +#define R8A7791_CLK_AUDIO_DMAC1 1 +#define R8A7791_CLK_AUDIO_DMAC0 2 #define R8A7791_CLK_THERMAL 22 #define R8A7791_CLK_PWM 23 -- cgit v1.2.3 From e416b66a6c62cd935c6959448aba46ae8fd25625 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:45:58 -0800 Subject: ARM: shmobile: r8a7790: Add Audio DMAC peri peri devices to DT Instantiate the Audio DMAC peri peri controllers in the r8a7790 device tree. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2e01d4950b59..146f91835d8b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -369,6 +369,13 @@ dma-channels = <13>; }; + audmapp: dma-controller@ec740000 { + compatible = "renesas,rcar-audmapp"; + #dma-cells = <1>; + + reg = <0 0xec740000 0 0x200>; + }; + i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 40c6d9f0e7745012c9e19c955e22d4809104359c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:46:28 -0800 Subject: ARM: shmobile: r8a7791: Add Audio DMAC peri peri devices to DT Instantiate the Audio DMAC peri peri controllers in the r8a7791 device tree. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index b54af745141a..379e1a505e33 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -357,6 +357,13 @@ dma-channels = <13>; }; + audmapp: dma-controller@ec740000 { + compatible = "renesas,rcar-audmapp"; + #dma-cells = <1>; + + reg = <0 0xec740000 0 0x200>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; -- cgit v1.2.3 From b46a6ae692ad784c0f580671a061ac70fdca92a4 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 3 Nov 2014 17:07:34 -0600 Subject: ARM: dts: DRA7: Add interrupts property to mailbox nodes Add the interrupts property to all the 13 mailbox nodes in DRA7xx. The interrupts property information added is inline with the expected values with the DRA7xx crossbar driver, and is common to both DRA74x and DRA72x SoCs. Do note that the mailbox 1 is only capable of generating out 3 interrupts, while all the remaining mailboxes have 4 interrupts each. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 9cc98436a982..b8c9c671427e 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -421,6 +421,9 @@ mailbox1: mailbox@4a0f4000 { compatible = "ti,omap4-mailbox"; reg = <0x4a0f4000 0x200>; + interrupts = , + , + ; ti,hwmods = "mailbox1"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; @@ -430,6 +433,10 @@ mailbox2: mailbox@4883a000 { compatible = "ti,omap4-mailbox"; reg = <0x4883a000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox2"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -439,6 +446,10 @@ mailbox3: mailbox@4883c000 { compatible = "ti,omap4-mailbox"; reg = <0x4883c000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox3"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -448,6 +459,10 @@ mailbox4: mailbox@4883e000 { compatible = "ti,omap4-mailbox"; reg = <0x4883e000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox4"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -457,6 +472,10 @@ mailbox5: mailbox@48840000 { compatible = "ti,omap4-mailbox"; reg = <0x48840000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox5"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -466,6 +485,10 @@ mailbox6: mailbox@48842000 { compatible = "ti,omap4-mailbox"; reg = <0x48842000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox6"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -475,6 +498,10 @@ mailbox7: mailbox@48844000 { compatible = "ti,omap4-mailbox"; reg = <0x48844000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox7"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -484,6 +511,10 @@ mailbox8: mailbox@48846000 { compatible = "ti,omap4-mailbox"; reg = <0x48846000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox8"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -493,6 +524,10 @@ mailbox9: mailbox@4885e000 { compatible = "ti,omap4-mailbox"; reg = <0x4885e000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox9"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -502,6 +537,10 @@ mailbox10: mailbox@48860000 { compatible = "ti,omap4-mailbox"; reg = <0x48860000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox10"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -511,6 +550,10 @@ mailbox11: mailbox@48862000 { compatible = "ti,omap4-mailbox"; reg = <0x48862000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox11"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -520,6 +563,10 @@ mailbox12: mailbox@48864000 { compatible = "ti,omap4-mailbox"; reg = <0x48864000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox12"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; @@ -529,6 +576,10 @@ mailbox13: mailbox@48802000 { compatible = "ti,omap4-mailbox"; reg = <0x48802000 0x200>; + interrupts = , + , + , + ; ti,hwmods = "mailbox13"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; -- cgit v1.2.3 From 24df0453198733e45094069a657b8cb06065fa84 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 3 Nov 2014 17:07:35 -0600 Subject: ARM: dts: OMAP2+: Add #mbox-cells property to all mailbox nodes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The '#mbox-cells' property is added to all the OMAP mailbox nodes. This property is mandatory with the new mailbox framework. Cc: "Benoît Cousson" Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 1 + arch/arm/boot/dts/am4372.dtsi | 1 + arch/arm/boot/dts/dra7.dtsi | 13 +++++++++++++ arch/arm/boot/dts/omap2420.dtsi | 1 + arch/arm/boot/dts/omap2430.dtsi | 1 + arch/arm/boot/dts/omap3.dtsi | 1 + arch/arm/boot/dts/omap4.dtsi | 1 + arch/arm/boot/dts/omap5.dtsi | 1 + 8 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 831810583823..41659df0ea67 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -356,6 +356,7 @@ reg = <0x480C8000 0x200>; interrupts = <77>; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 46660ffd2b65..4367f7550183 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -168,6 +168,7 @@ reg = <0x480C8000 0x200>; interrupts = ; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index b8c9c671427e..2af786794d73 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -425,6 +425,7 @@ , ; ti,hwmods = "mailbox1"; + #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; status = "disabled"; @@ -438,6 +439,7 @@ , ; ti,hwmods = "mailbox2"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -451,6 +453,7 @@ , ; ti,hwmods = "mailbox3"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -464,6 +467,7 @@ , ; ti,hwmods = "mailbox4"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -477,6 +481,7 @@ , ; ti,hwmods = "mailbox5"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -490,6 +495,7 @@ , ; ti,hwmods = "mailbox6"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -503,6 +509,7 @@ , ; ti,hwmods = "mailbox7"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -516,6 +523,7 @@ , ; ti,hwmods = "mailbox8"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -529,6 +537,7 @@ , ; ti,hwmods = "mailbox9"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -542,6 +551,7 @@ , ; ti,hwmods = "mailbox10"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -555,6 +565,7 @@ , ; ti,hwmods = "mailbox11"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -568,6 +579,7 @@ , ; ti,hwmods = "mailbox12"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; @@ -581,6 +593,7 @@ , ; ti,hwmods = "mailbox13"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index ae89aad01595..e2b2e93d7b61 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -157,6 +157,7 @@ interrupts = <26>, <34>; interrupt-names = "dsp", "iva"; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; mbox_dsp: dsp { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index b56d71611026..0dc8de2782b1 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -247,6 +247,7 @@ reg = <0x48094000 0x200>; interrupts = <26>; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; mbox_dsp: dsp { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index d0e884d3a737..8db7def81c28 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -332,6 +332,7 @@ ti,hwmods = "mailbox"; reg = <0x48094000 0x200>; interrupts = <26>; + #mbox-cells = <1>; ti,mbox-num-users = <2>; ti,mbox-num-fifos = <2>; mbox_dsp: dsp { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 878c979203d0..a46eab82d2da 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -661,6 +661,7 @@ reg = <0x4a0f4000 0x200>; interrupts = ; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; mbox_ipu: mbox_ipu { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 256b7f69e45b..b321fdf42c9f 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -651,6 +651,7 @@ reg = <0x4a0f4000 0x200>; interrupts = ; ti,hwmods = "mailbox"; + #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; mbox_ipu: mbox_ipu { -- cgit v1.2.3 From 13fd3d57992e87f5193719640bc3963822ec61eb Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 29 Sep 2014 20:06:46 +0200 Subject: ARM: dts: am33xx: add DMA properties for UART Cc: devicetree@vger.kernel.org Reviewed-by: Tony Lindgren Tested-by: Tony Lindgren Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 41659df0ea67..62bf053d2cb8 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -204,6 +204,8 @@ reg = <0x44e09000 0x2000>; interrupts = <72>; status = "disabled"; + dmas = <&edma 26>, <&edma 27>; + dma-names = "tx", "rx"; }; uart1: serial@48022000 { @@ -213,6 +215,8 @@ reg = <0x48022000 0x2000>; interrupts = <73>; status = "disabled"; + dmas = <&edma 28>, <&edma 29>; + dma-names = "tx", "rx"; }; uart2: serial@48024000 { @@ -222,6 +226,8 @@ reg = <0x48024000 0x2000>; interrupts = <74>; status = "disabled"; + dmas = <&edma 30>, <&edma 31>; + dma-names = "tx", "rx"; }; uart3: serial@481a6000 { -- cgit v1.2.3 From f0199a29cf3cd208ed00135087683fe9f28fc882 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 29 Sep 2014 20:06:47 +0200 Subject: ARM: dts: dra7: add DMA properties for UART Cc: devicetree@vger.kernel.org Reviewed-by: Tony Lindgren Tested-by: Tony Lindgren Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2af786794d73..d0fe40c245f3 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -335,6 +335,8 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; + dmas = <&sdma 49>, <&sdma 50>; + dma-names = "tx", "rx"; }; uart2: serial@4806c000 { @@ -344,6 +346,8 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; + dmas = <&sdma 51>, <&sdma 52>; + dma-names = "tx", "rx"; }; uart3: serial@48020000 { @@ -353,6 +357,8 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; + dmas = <&sdma 53>, <&sdma 54>; + dma-names = "tx", "rx"; }; uart4: serial@4806e000 { @@ -362,6 +368,8 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; + dmas = <&sdma 55>, <&sdma 56>; + dma-names = "tx", "rx"; }; uart5: serial@48066000 { @@ -371,6 +379,8 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; + dmas = <&sdma 63>, <&sdma 64>; + dma-names = "tx", "rx"; }; uart6: serial@48068000 { @@ -380,6 +390,8 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; + dmas = <&sdma 79>, <&sdma 80>; + dma-names = "tx", "rx"; }; uart7: serial@48420000 { -- cgit v1.2.3 From e5ee042b67cc687693b6b8e23aa25b5a311b860f Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Sun, 2 Nov 2014 13:19:58 +0200 Subject: ARM: dts: sbc-t3x: add DVI display data Add DSS related pinmux and display data nodes required to support DVI video out on SBC-T3530, SBC-T3730 and SBC-T3517. Signed-off-by: Dmitry Lifshitz Acked-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3517.dts | 11 ++++++++ arch/arm/boot/dts/omap3-cm-t3530.dts | 11 ++++++++ arch/arm/boot/dts/omap3-cm-t3730.dts | 24 +++++++++++++++++ arch/arm/boot/dts/omap3-cm-t3x.dtsi | 39 ++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-sb-t35.dtsi | 49 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-sbc-t3517.dts | 14 ++++++++++ arch/arm/boot/dts/omap3-sbc-t3530.dts | 14 ++++++++++ arch/arm/boot/dts/omap3-sbc-t3730.dts | 14 ++++++++++ 8 files changed, 176 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index d00502f4fd9b..0ab748cf7749 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -134,3 +134,14 @@ bus-width = <4>; cap-power-off-card; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins_common + &dss_dpi_pins_cm_t35x + >; +}; + diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index d1458496520e..8dd14fcf6825 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -46,3 +46,14 @@ bus-width = <4>; cap-power-off-card; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins_common + &dss_dpi_pins_cm_t35x + >; +}; + diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index b3f9a50b3bc8..46eadb21b5ef 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -31,6 +31,19 @@ }; }; +&omap3_pmx_wkup { + dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + &omap3_pmx_core { mmc2_pins: pinmux_mmc2_pins { @@ -61,3 +74,14 @@ bus-width = <4>; cap-power-off-card; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins_common + &dss_dpi_pins_cm_t3730 + >; +}; + diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index c671a2299ea8..b074673703bf 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -76,6 +76,45 @@ OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */ >; }; + + dss_dpi_pins_common: pinmux_dss_dpi_pins_common { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + >; + }; }; &uart3 { diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 28e16a6ce4bd..b1cb5774f49a 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -2,6 +2,49 @@ * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730 */ +/ { + tfp410: encoder@0 { + compatible = "ti,tfp410"; + + powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ + + pinctrl-names = "default"; + pinctrl-0 = <&tfp410_pins>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + &omap3_pmx_core { smsc2_pins: pinmux_smsc2_pins { pinctrl-single,pins = < @@ -9,6 +52,12 @@ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */ >; }; + + tfp410_pins: pinmux_tfp410_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ + >; + }; }; &gpmc { diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index 42189b65d393..4ec5d8684122 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -9,6 +9,10 @@ model = "CompuLab SBC-T3517 with CM-T3517"; compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; + aliases { + display0 = &dvi0; + }; + /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ vddvario: regulator-vddvario-sb-t35 { compatible = "regulator-fixed"; @@ -54,3 +58,13 @@ wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ }; + +&dss { + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index bbbeea6b1988..8dfc1df8cc17 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -8,6 +8,10 @@ / { model = "CompuLab SBC-T3530 with CM-T3530"; compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + + aliases { + display0 = &dvi0; + }; }; &omap3_pmx_core { @@ -34,3 +38,13 @@ &mmc1 { cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; }; + +&dss { + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 08e4a7086f22..6b69864bd6ce 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,6 +8,10 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + + aliases { + display0 = &dvi0; + }; }; &omap3_pmx_core { @@ -25,3 +29,13 @@ ranges = <5 0 0x2c000000 0x01000000>, <4 0 0x2d000000 0x01000000>; }; + +&dss { + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + -- cgit v1.2.3 From 021fe93645bbabeabd91a232ba24b984c215b199 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 17 Oct 2014 22:32:03 +0200 Subject: ARM: dts: omap3-gta04: Use omap specific pinctrl defines Use omap specific pinctrl defines (OMAP3_CORE1_IOPAD) to configure the padconf register offset. Signed-off-by: Marek Belisko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-gta04.dtsi | 82 +++++++++++++++++++------------------- 1 file changed, 41 insertions(+), 41 deletions(-) diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 91bba857e0f9..655d6e920a86 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -104,67 +104,67 @@ uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < - 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ - >; + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; }; }; -- cgit v1.2.3 From ef9c5b690079233a042887cd07279aac5ec692a8 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 21 Oct 2014 15:31:00 +0530 Subject: ARM: dts: dra7: Add CPSW and MDIO module nodes for dra7 Add CPSW and MDIO related device tree data for DRA7XX and made as status disabled. Phy-id, pinmux for active and sleep state needs to be added in board dts files and enable the CPSW device. Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 61 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d0fe40c245f3..077da7248b2c 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -34,6 +34,8 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; }; timer { @@ -1341,6 +1343,65 @@ ti,irqs-skip = <10 133 139 140>; ti,irqs-safe-map = <0>; }; + + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "gmac"; + clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x48484000 0x1000 + 0x48485200 0x2E00>; + #address-cells = <1>; + #size-cells = <1>; + /* + * rx_thresh_pend + * rx_pend + * tx_pend + * misc_pend + */ + interrupts = , + , + , + ; + ranges; + status = "disabled"; + + davinci_mdio: mdio@48485000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x48485000 0x100>; + }; + + cpsw_emac0: slave@48480200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@48480300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + phy_sel: cpsw-phy-sel@4a002554 { + compatible = "ti,dra7xx-cpsw-phy-sel"; + reg= <0x4a002554 0x4>; + reg-names = "gmii-sel"; + }; + }; + }; }; -- cgit v1.2.3 From 8d039290dec1caad0aa037b0c4fd527cff903729 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 21 Oct 2014 15:31:01 +0530 Subject: ARM: dts: dra7-evm: Enable CPSW and MDIO for dra7xx EVM Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 106 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index c6ce6258434f..07a525ac3b4f 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -171,6 +171,86 @@ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ >; }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ + 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ + 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ + 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ + 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ + 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ + 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ + 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ + 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ + 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ + 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ + 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ + + /* Slave 2 */ + 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + >; + + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (MUX_MODE15) + 0x254 (MUX_MODE15) + 0x258 (MUX_MODE15) + 0x25c (MUX_MODE15) + 0x260 (MUX_MODE15) + 0x264 (MUX_MODE15) + 0x268 (MUX_MODE15) + 0x26c (MUX_MODE15) + 0x270 (MUX_MODE15) + 0x274 (MUX_MODE15) + 0x278 (MUX_MODE15) + 0x27c (MUX_MODE15) + + /* Slave 2 */ + 0x198 (MUX_MODE15) + 0x19c (MUX_MODE15) + 0x1a0 (MUX_MODE15) + 0x1a4 (MUX_MODE15) + 0x1a8 (MUX_MODE15) + 0x1ac (MUX_MODE15) + 0x1b0 (MUX_MODE15) + 0x1b4 (MUX_MODE15) + 0x1b8 (MUX_MODE15) + 0x1bc (MUX_MODE15) + 0x1c0 (MUX_MODE15) + 0x1c4 (MUX_MODE15) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + 0x23c (MUX_MODE15) + 0x240 (MUX_MODE15) + >; + }; + }; &i2c1 { @@ -528,3 +608,29 @@ ti,no-reset-on-init; ti,no-idle-on-init; }; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; -- cgit v1.2.3 From 09d4993cf50e4f61ed639ed181d5f077e98e0f3c Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 21 Oct 2014 13:41:17 +0300 Subject: ARM: dts: dra72-evm: Add NAND support DRA72-evm has a 256MB 16-bit wide NAND chip. Add pinmux and NAND node. The NAND chips 'Chip select' and 'Write protect' can be controlled using DIP Switch SW5. To use NAND, the switch must be configured like so: SW5.1 (NAND_SELn) = ON (LOW) SW5.9 (GPMC_WPN) = OFF (HIGH) Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Tested-by: Nishanth Menon Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 115 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 41074288adfa..6f5417a8b83f 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -26,6 +26,33 @@ 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ >; }; + + nand_default: nand_default { + pinctrl-single,pins = < + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ + 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ + >; + }; }; &i2c1 { @@ -142,3 +169,91 @@ &uart1 { status = "okay"; }; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_default>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + /* To use NAND, DIP switch SW5 must be set like so: + * SW5.1 (NAND_SELn) = ON (LOW) + * SW5.9 (GPMC_WPN) = OFF (HIGH) + */ + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <80>; + gpmc,cs-wr-off-ns = <80>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <60>; + gpmc,adv-wr-off-ns = <60>; + gpmc,we-on-ns = <10>; + gpmc,we-off-ns = <50>; + gpmc,oe-on-ns = <4>; + gpmc,oe-off-ns = <40>; + gpmc,access-ns = <40>; + gpmc,wr-access-ns = <80>; + gpmc,rd-cycle-ns = <80>; + gpmc,wr-cycle-ns = <80>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000c0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001c0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x001e0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x0f600000>; + }; + }; +}; -- cgit v1.2.3 From 6b14eb4705d65befdb055998b017bb7a3bb7dff4 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 21 Oct 2014 13:41:18 +0300 Subject: ARM: dts: DRA7: Move USB_OTG 4 to dra74x.dtsi The 4th USB controller instance present only on the DRA74x family of devices so move it there. Signed-off-by: Roger Quadros Acked-by: Nishanth Menon Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 20 -------------------- arch/arm/boot/dts/dra74x.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 077da7248b2c..6470acfae468 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1282,26 +1282,6 @@ }; }; - omap_dwc3_4@48940000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss4"; - reg = <0x48940000 0x10000>; - interrupts = ; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - status = "disabled"; - usb4: usb@48950000 { - compatible = "snps,dwc3"; - reg = <0x48950000 0x17000>; - interrupts = ; - tx-fifo-resize; - maximum-speed = "high-speed"; - dr_mode = "otg"; - }; - }; - elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0xfc0>; /* device IO registers */ diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 3be544c4891f..5667b924bd32 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -44,4 +44,26 @@ interrupts = , ; }; + + ocp { + omap_dwc3_4@48940000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss4"; + reg = <0x48940000 0x10000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb4: usb@48950000 { + compatible = "snps,dwc3"; + reg = <0x48950000 0x17000>; + interrupts = ; + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + }; }; -- cgit v1.2.3 From 95cc6af8200665f3490e3e836dc9c6ac058c9422 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Tue, 21 Oct 2014 13:41:19 +0300 Subject: ARM: dts: dra72-evm: Enable USB support for dra72-evm. Add USB data and pinctrl for USB. Signed-off-by: George Cherian Signed-off-by: Sekhar Nori Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6f5417a8b83f..ad6ec4ae0a25 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -53,6 +53,18 @@ 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ >; }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + usb2_pins: pinmux_usb2_pins { + pinctrl-single,pins = < + 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + >; + }; }; &i2c1 { @@ -257,3 +269,15 @@ }; }; }; + +&usb1 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&usb2 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; +}; -- cgit v1.2.3 From 7a15c8e74737283e9c195742074812aeaea08eaa Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 21 Oct 2014 13:41:20 +0300 Subject: ARM: dts: dra72-evm: Add regulator information to USB2 PHYs The ldo4_reg regulator provides power to the USB1 and USB2 High Speed PHYs. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index ad6ec4ae0a25..b135aab0aa5f 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -270,6 +270,14 @@ }; }; +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; -- cgit v1.2.3 From 829acd07793538cbb19ee416e8917d7560fa47c8 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 21 Oct 2014 09:30:46 -0500 Subject: ARM: dts: dra72-evm: Provide explicit pinmux for TPS PMIC Even thought sys_nirq1 is hardwired on the SoC for the pin, it is better to configure the pin to the required mux configuration. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index b135aab0aa5f..5d26fa1144e3 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -65,6 +65,12 @@ 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ >; }; + + tps65917_pins_default: tps65917_pins_default { + pinctrl-single,pins = < + 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ + >; + }; }; &i2c1 { @@ -77,6 +83,9 @@ compatible = "ti,tps65917"; reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&tps65917_pins_default>; + interrupts = ; /* IRQ_SYS_1N */ interrupt-parent = <&gic>; interrupt-controller; -- cgit v1.2.3 From ab1d3c842c4b3cb0a389a160373efb6986da54d9 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 21 Oct 2014 09:30:47 -0500 Subject: ARM: dts: dra72-evm: Add power button node With Commit adff5962fdd2 ("Input: introduce palmas-pwrbutton"), we can now support tps power button as a event source - This is SW7 (PB/WAKE) on the J6-evm. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 5d26fa1144e3..e5a4227aa7eb 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -184,6 +184,14 @@ }; }; }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; }; }; -- cgit v1.2.3 From 5b434d7e9ebd5664dd2a649d08f0ab8d1c8a1f71 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 21 Oct 2014 09:35:56 -0500 Subject: ARM: dts: dra72-evm: Add MMC nodes Add MMC1 and 2 nodes. MMC1 is SDcard and MMC2 is eMMC. NOTE on MMC1 card detect: Ideally, we should be using in-built SDCD support, but we dont have it yet. So, use the fact that control module of DRA7 is setup such that no matter what mode one configures it, GPIO option is always hardwired in - use GPIO mode for SDcard detection. [peter.ujfalusi@ti.com] The power line feeding the SD card is also used by other devices on the EVM. Use generic name instead of mmc2_3v3 so when other devices want to use the same regulator it will look a bit better. Signed-off-by: Nishanth Menon Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 59 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index e5a4227aa7eb..812f7b44c750 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -17,6 +17,13 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1024 MB */ }; + + evm_3v3: fixedregulator-evm_3v3 { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &dra7_pmx_core { @@ -71,6 +78,33 @@ 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ >; }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; }; &i2c1 { @@ -306,3 +340,28 @@ pinctrl-names = "default"; pinctrl-0 = <&usb2_pins>; }; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; + /* + * SDCD signal is not being used here - using the fact that GPIO mode + * is a viable alternative + */ + cd-gpios = <&gpio6 27 0>; +}; + +&mmc2 { + /* SW5-3 in ON position */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + + vmmc-supply = <&evm_3v3>; + bus-width = <8>; + ti,non-removable; +}; -- cgit v1.2.3 From 395b23ca57b46e79d7956ce1d5a9381dc6fe0e3a Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 21 Oct 2014 09:38:10 -0500 Subject: ARM: dts: dra7-evm: Keep all VDD rails always-on DRA7 Data Manual (SPRS857L - August 2014) section 4.1.1 states: "All unused power supply balls must be supplied with the voltages specified in the Section 5.2, Recommended Operating Conditions". This implies that all unused voltage rails for Vayu can never be switched off even if the hardware blocks inside that voltage domain is unused. Switching off these unused rails may result in stability issues on other domains and increased leakage and power-on-hour impacts. J6eco-evm dts file already considers this, however j6evm-dts file needs to be fixed to consider this constraint of the SoC. Signed-off-by: Nishanth Menon Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 07a525ac3b4f..0d8a3bd0f00d 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -281,6 +281,7 @@ regulator-name = "smps45"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1150000>; + regulator-always-on; regulator-boot-on; }; @@ -289,6 +290,7 @@ regulator-name = "smps6"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <12500000>; + regulator-always-on; regulator-boot-on; }; @@ -306,6 +308,7 @@ regulator-name = "smps8"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1250000>; + regulator-always-on; regulator-boot-on; }; @@ -332,6 +335,7 @@ regulator-name = "ldo2"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; regulator-boot-on; }; @@ -349,6 +353,7 @@ regulator-name = "ldo9"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; + regulator-always-on; regulator-boot-on; }; -- cgit v1.2.3 From d5475152fe706497915a7f8d6a8679854ef868f5 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 3 Nov 2014 15:28:13 +0530 Subject: ARM: dts: dra72x-evm: Enable CPSW and MDIO Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file. Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 73 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 812f7b44c750..abbaaa782f88 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -365,3 +365,76 @@ bus-width = <8>; ti,non-removable; }; + +&dra7_pmx_core { + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 2 */ + 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + >; + + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 2 */ + 0x198 (MUX_MODE15) + 0x19c (MUX_MODE15) + 0x1a0 (MUX_MODE15) + 0x1a4 (MUX_MODE15) + 0x1a8 (MUX_MODE15) + 0x1ac (MUX_MODE15) + 0x1b0 (MUX_MODE15) + 0x1b4 (MUX_MODE15) + 0x1b8 (MUX_MODE15) + 0x1bc (MUX_MODE15) + 0x1c0 (MUX_MODE15) + 0x1c4 (MUX_MODE15) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + 0x23c (MUX_MODE15) + 0x240 (MUX_MODE15) + >; + }; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + active_slave = <1>; +}; -- cgit v1.2.3 From 4f6dec7068de704af072af36ef5b8617841503fc Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 3 Nov 2014 10:28:42 -0600 Subject: ARM: dts: dra7: add labels to DWC3 nodes by adding labels to DWC3 nodes, it's far easier for boards to reference them. Signed-off-by: Felipe Balbi [tony@atomide.com: updated for otg 4 move to dra74x.dtsi] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 6 +++--- arch/arm/boot/dts/dra74x.dtsi | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 6470acfae468..c6fc56618599 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1219,7 +1219,7 @@ }; }; - omap_dwc3_1@48880000 { + omap_dwc3_1: omap_dwc3_1@48880000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss1"; reg = <0x48880000 0x10000>; @@ -1240,7 +1240,7 @@ }; }; - omap_dwc3_2@488c0000 { + omap_dwc3_2: omap_dwc3_2@488c0000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss2"; reg = <0x488c0000 0x10000>; @@ -1262,7 +1262,7 @@ }; /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ - omap_dwc3_3@48900000 { + omap_dwc3_3: omap_dwc3_3@48900000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss3"; reg = <0x48900000 0x10000>; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 5667b924bd32..10173fab1a15 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -46,7 +46,7 @@ }; ocp { - omap_dwc3_4@48940000 { + omap_dwc3_4: omap_dwc3_4@48940000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; reg = <0x48940000 0x10000>; -- cgit v1.2.3 From e883d67285e9267c73f8d2b9d32aa9e712ad00a4 Mon Sep 17 00:00:00 2001 From: Emilio López Date: Thu, 6 Nov 2014 11:40:30 +0800 Subject: ARM: dts: sunxi: unify APB1 clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the new factors infrastructure in place, we can unify apb1 and apb1_mux as a single clock now. Signed-off-by: Emilio López [wens@csie.org: Change apb1 node label to "apb1"; reword commit title] Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 12 ++---------- arch/arm/boot/dts/sun5i-a10s.dtsi | 12 ++---------- arch/arm/boot/dts/sun5i-a13.dtsi | 12 ++---------- arch/arm/boot/dts/sun7i-a20.dtsi | 12 ++---------- 4 files changed, 8 insertions(+), 40 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 380f914b226d..5e2ec2dd8333 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -174,19 +174,11 @@ "apb0_ir1", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 531272c0e526..d2a85144d2d9 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -162,19 +162,11 @@ "apb0_ir", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index b131068f4f35..c35217ea1f64 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -161,19 +161,11 @@ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 45bb9162f5c7..8605f2b175ed 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -222,19 +222,11 @@ "apb0_iis2", "apb0_keypad"; }; - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { + apb1: clk@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; clock-output-names = "apb1"; }; -- cgit v1.2.3 From 338302ae32b7be73da97b746f660b283642cfc5c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 6 Nov 2014 11:40:31 +0800 Subject: ARM: dts: sunxi: Use sun4i-a10-apb1-clk for sun6i/sun8i apb2 clocks. The apb2 clocks are actually the same as apb1 clocks on the other sunxi platforms, hence compatible with "allwinner,sun4i-a10-apb1-clk". Update the dtsi to use the new unified apb1 clk. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++---------- arch/arm/boot/dts/sun8i-a23.dtsi | 12 ++---------- 2 files changed, 4 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index e80288e881ec..3a51151b1dd2 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -217,19 +217,11 @@ "apb1_daudio1"; }; - apb2_mux: apb2_mux@01c20058 { + apb2: clk@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; - clock-output-names = "apb2_mux"; - }; - - apb2: apb2@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-apb2-div-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb2_mux>; clock-output-names = "apb2"; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 6086adbf9d74..0746cd1024d7 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -189,19 +189,11 @@ "apb1_daudio0", "apb1_daudio1"; }; - apb2_mux: apb2_mux_clk@01c20058 { + apb2: clk@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; - clock-output-names = "apb2_mux"; - }; - - apb2: apb2_clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-apb2-div-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb2_mux>; clock-output-names = "apb2"; }; -- cgit v1.2.3 From 878a3ee38d6e876093f742403316e91301303a3d Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 30 Oct 2014 11:21:27 +0100 Subject: ARM: berlin: Add AHCI and SATA PHY nodes to BG2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add DT nodes for the AHCI controller and SATA PHY found on Marvell Berlin2 SoCs. Acked-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 20e7c394a008..015a06c67c91 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -311,6 +311,45 @@ }; }; + ahci: sata@e90000 { + compatible = "marvell,berlin2-ahci", "generic-ahci"; + reg = <0xe90000 0x1000>; + interrupts = ; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + status = "disabled"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + status = "disabled"; + }; + }; + + sata_phy: phy@e900a0 { + compatible = "marvell,berlin2-sata-phy"; + reg = <0xe900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <1>; + status = "disabled"; + + sata-phy@0 { + reg = <0>; + }; + + sata-phy@1 { + reg = <1>; + }; + }; + chip: chip-control@ea0000 { compatible = "marvell,berlin2-chip-ctrl"; #clock-cells = <1>; -- cgit v1.2.3 From 9f6386e1ee3ad9cae0175a76d1e689c2c4b311a0 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 12 Nov 2014 00:18:59 +0100 Subject: ARM: berlin: Enable SATA on Sony NSZ-GS7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Marvell Berlin BG2 based Sony NSZ-GS7 has an unpopulated SATA plug on its PCB solder side. As it is quite easy to populate and I have done it, enable AHCI and SATA by default. Acked-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 04f391b5c124..86d85d8896a3 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -26,8 +26,15 @@ }; }; +&ahci { status = "okay"; }; + ð1 { status = "okay"; }; +/* Unpopulated SATA plug on solder side */ +&sata0 { status = "okay"; }; + +&sata_phy { status = "okay"; }; + /* Samsung M8G2FA 8GB eMMC */ &sdhci2 { non-removable; -- cgit v1.2.3 From 3a3dce08f11d4e6b37cd558c0778974d5a92cf84 Mon Sep 17 00:00:00 2001 From: Jonathan Richardson Date: Fri, 15 Aug 2014 13:51:50 -0700 Subject: dt-bindings: Document Broadcom Cygnus SoC and clocks Reviewed-by: Arun Parameswaran Tested-by: Jonathan Richardson Reviewed-by: JD (Jiandong) Zheng Reviewed-by: Ray Jui Signed-off-by: Scott Branden Signed-off-by: Florian Fainelli --- .../devicetree/bindings/arm/bcm/cygnus.txt | 31 ++++++++++++++++++++ .../devicetree/bindings/clock/bcm-cygnus-clock.txt | 34 ++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/cygnus.txt create mode 100644 Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt diff --git a/Documentation/devicetree/bindings/arm/bcm/cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt new file mode 100644 index 000000000000..4c77169bb534 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt @@ -0,0 +1,31 @@ +Broadcom Cygnus device tree bindings +------------------------------------ + + +Boards with Cygnus SoCs shall have the following properties: + +Required root node property: + +BCM11300 +compatible = "brcm,bcm11300", "brcm,cygnus"; + +BCM11320 +compatible = "brcm,bcm11320", "brcm,cygnus"; + +BCM11350 +compatible = "brcm,bcm11350", "brcm,cygnus"; + +BCM11360 +compatible = "brcm,bcm11360", "brcm,cygnus"; + +BCM58300 +compatible = "brcm,bcm58300", "brcm,cygnus"; + +BCM58302 +compatible = "brcm,bcm58302", "brcm,cygnus"; + +BCM58303 +compatible = "brcm,bcm58303", "brcm,cygnus"; + +BCM58305 +compatible = "brcm,bcm58305", "brcm,cygnus"; diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt new file mode 100644 index 000000000000..00d26edec8bc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt @@ -0,0 +1,34 @@ +Broadcom Cygnus Clocks + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +Currently various "fixed" clocks are declared for peripheral drivers that use +the common clock framework to reference their core clocks. Proper support of +these clocks will be added later + +Device tree example: + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <25000000>; + }; + + apb_clk: apb_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + }; -- cgit v1.2.3 From c9ad7bc5fe3c57c8c817fcb1bd264a02176a40c4 Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Tue, 14 Oct 2014 16:42:25 -0700 Subject: ARM: dts: Enable Broadcom Cygnus SoC DT files to enable cygnus consisting on reference designs and cygnus core configuration. Reviewed-by: Ray Jui Reviewed-by: Arun Parameswaran Tested-by: Jonathan Richardson Reviewed-by: JD (Jiandong) Zheng Signed-off-by: Scott Branden Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/Makefile | 3 + arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 91 +++++++++++++++++++++ arch/arm/boot/dts/bcm-cygnus.dtsi | 140 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 53 ++++++++++++ arch/arm/boot/dts/bcm911360k.dts | 53 ++++++++++++ arch/arm/boot/dts/bcm958300k.dts | 53 ++++++++++++ 6 files changed, 393 insertions(+) create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts create mode 100644 arch/arm/boot/dts/bcm911360k.dts create mode 100644 arch/arm/boot/dts/bcm958300k.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..9063142f4d87 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -56,6 +56,9 @@ dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb +dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \ + bcm911360k.dtb \ + bcm958300k.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi new file mode 100644 index 000000000000..60d8389fdb6c --- /dev/null +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -0,0 +1,91 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <25000000>; + }; + + apb_clk: apb_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + sdio_clk: lcpll_ch2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + axi81_clk: axi81_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + keypad_clk: keypad_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <31806>; + }; + + adc_clk: adc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1562500>; + }; + + pwm_clk: pwm_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + + lcd_clk: mipipll_ch1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi new file mode 100644 index 000000000000..5126f9e77a98 --- /dev/null +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -0,0 +1,140 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,cygnus"; + model = "Broadcom Cygnus SoC"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + /include/ "bcm-cygnus-clock.dtsi" + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus", "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = ; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + }; + }; + + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart1: serial@18021000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18021000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart2: serial@18022000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + gic: interrupt-controller@19021000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x19021000 0x1000>, + <0x19020100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x19022000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + timer@19020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x19020200 0x100>; + interrupts = ; + clocks = <&periph_clk>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts new file mode 100644 index 000000000000..d2ee95280548 --- /dev/null +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -0,0 +1,53 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; + + uart3: serial@18023000 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts new file mode 100644 index 000000000000..9658d4f62d59 --- /dev/null +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -0,0 +1,53 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus SVK (BCM911360K)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; + + uart3: serial@18023000 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts new file mode 100644 index 000000000000..f1bb36f3975c --- /dev/null +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -0,0 +1,53 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus SVK (BCM958300K)"; + compatible = "brcm,bcm58300", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; + + uart3: serial@18023000 { + status = "okay"; + }; +}; -- cgit v1.2.3 From f82f99afaa65fd28d0f8409c50e8fcc65ee5e15b Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Wed, 12 Nov 2014 00:01:46 +0100 Subject: ARM: dts: sunxi: Banana Pi: increase startup-delay for the GMAC PHY regulator On the LeMaker Banana Pi, probing the external ethernet PHY connected to the SoC's internal GMAC module sometimes fails. The PHY power supply is handled via a GPIO-controlled regulator, and the existing regulator startup-delay of 50000us is too short to make sure that the PHY is always fully powered up when it is queried by phylib. Tests have shown that to provide a reliable PHY detection, the startup-delay has to be increased to at least 60000us. To have a certain safety margin and to cater for manufacturing variations between different boards, the delay gets set to 100000us as discussed on the linux-arm-kernel mailinglist. Signed-off-by: Karsten Merker Acked-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 3de847db7e76..1cf1214cc068 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -207,7 +207,7 @@ regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; + startup-delay-us = <100000>; enable-active-high; gpio = <&pio 7 23 0>; }; -- cgit v1.2.3 From 86f9abb6ec730441731bc5aff3e3865c9186bb13 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:41 +0100 Subject: ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common. UART2 is used to connect the processor with the bluetooth chip, these pins are not common between IGEPv2 boards and IGEP COM MODULE boards. This patch muxes the correct pins for every board and removes UART2 configuration from common omap3-igep.dtsi file. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 12 ------------ arch/arm/boot/dts/omap3-igep0020.dts | 14 ++++++++++++++ arch/arm/boot/dts/omap3-igep0030.dts | 16 ++++++++++++++++ 3 files changed, 30 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index e2d163bf0619..fb1040da4c9e 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -53,13 +53,6 @@ >; }; - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ - >; - }; - uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ @@ -198,11 +191,6 @@ pinctrl-0 = <&uart1_pins>; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index cc9343e836c6..87d77e4ce6f8 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -149,6 +149,15 @@ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + >; + }; }; &omap3_pmx_core2 { @@ -256,6 +265,11 @@ }; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + &usbhshost { port1-mode = "ehci-phy"; }; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 84b74527c544..2df13964f7e7 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -46,6 +46,17 @@ }; }; +&omap3_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ + OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ + OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ + >; + }; +}; + &omap3_pmx_core2 { leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -104,3 +115,8 @@ }; }; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; -- cgit v1.2.3 From e170db3c1fc8adb20c934b50a327b58c2b08eab5 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:42 +0100 Subject: ARM: dts: omap3-igep00x0: Move NAND configuration to a common place. At this moment all supported boards use same NAND chip, so has more sense move the GPMC and NAND configuration to the omap3-igep.dtsi common place. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 49 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-igep0020.dts | 47 --------------------------------- arch/arm/boot/dts/omap3-igep0030.dts | 51 ------------------------------------ 3 files changed, 49 insertions(+), 98 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index fb1040da4c9e..04a58ab32b33 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -128,6 +128,55 @@ }; }; +&gpmc { + nand@0,0 { + linux,mtd-name= "micron,mt29c4g96maz"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0 0x100000>; + }; + partition@80000 { + label = "U-Boot"; + reg = <0x100000 0x180000>; + }; + partition@1c0000 { + label = "Environment"; + reg = <0x280000 0x100000>; + }; + partition@280000 { + label = "Kernel"; + reg = <0x380000 0x300000>; + }; + partition@780000 { + label = "Filesystem"; + reg = <0x680000 0x1f980000>; + }; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 87d77e4ce6f8..731ab8f3de4a 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -209,53 +209,6 @@ ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; - nand@0,0 { - linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - nand-bus-width = <16>; - gpmc,device-width = <2>; - ti,nand-ecc-opt = "bch8"; - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0 0x100000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x100000 0x180000>; - }; - partition@1c0000 { - label = "Environment"; - reg = <0x280000 0x100000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x380000 0x300000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x680000 0x1f980000>; - }; - }; - ethernet@gpmc { pinctrl-names = "default"; pinctrl-0 = <&smsc9221_pins>; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 2df13964f7e7..5862380b0fb3 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -65,57 +65,6 @@ }; }; -&gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ - - nand@0,0 { - linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - nand-bus-width = <16>; - gpmc,device-width = <2>; - ti,nand-ecc-opt = "bch8"; - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0 0x100000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x100000 0x180000>; - }; - partition@1c0000 { - label = "Environment"; - reg = <0x280000 0x100000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x380000 0x300000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x680000 0x1f980000>; - }; - }; -}; - &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; -- cgit v1.2.3 From a1f4d206f7ce2081b68d618a32cab522db7df749 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:43 +0100 Subject: ARM: dts: omap3-igep0030: Specify IGEP COM revision in device tree. We'll introduce new hardware revisions soon. This patch is only to indicate which board revision supports this device tree file in order to avoid confusions. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0030.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 5862380b0fb3..d7527b63b8d3 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) + * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; + model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; leds { -- cgit v1.2.3 From 9927064e8cd94ef23589546b47e5b9038fbb175f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:44 +0100 Subject: ARM: dts: omap3-igep0020: Specify IGEPv2 revision in device tree. We'll introduce new hardware revisions soon. This patch is only to indicate which board revision supports this device tree file in order to avoid confusions. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 731ab8f3de4a..75a3ac3ef169 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) + * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc9221.dtsi" / { - model = "IGEPv2 (TI OMAP AM/DM37x)"; + model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; leds { -- cgit v1.2.3 From 2de584ed31aa0a0b7e3c936286f55245e6ebd58a Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:45 +0100 Subject: ARM: dts: omap3-igep00x0: Move outside common file the on board Wifi module. New IGEP boards revisions will use another Wifi module, so this patch moves the DT nodes outside the common omap3-igep.dtsi file to specific DT for every board. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 29 --------------------------- arch/arm/boot/dts/omap3-igep0020.dts | 39 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-igep0030.dts | 39 ++++++++++++++++++++++++++++++++++++ 3 files changed, 78 insertions(+), 29 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 04a58ab32b33..6118e7fd71b2 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -31,18 +31,6 @@ regulator-always-on; }; - lbee1usjyc_vmmc: lbee1usjyc_vmmc { - pinctrl-names = "default"; - pinctrl-0 = <&lbee1usjyc_pins>; - compatible = "regulator-fixed"; - regulator-name = "regulator-lbee1usjyc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ - startup-delay-us = <10000>; - enable-active-high; - vin-supply = <&vdd33>; - }; }; &omap3_pmx_core { @@ -60,15 +48,6 @@ >; }; - /* WiFi/BT combo */ - lbee1usjyc_pins: pinmux_lbee1usjyc_pins { - pinctrl-single,pins = < - 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ - 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ - 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ - >; - }; - mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -223,14 +202,6 @@ bus-width = <4>; }; -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - vmmc-supply = <&lbee1usjyc_vmmc>; - bus-width = <4>; - non-removable; -}; - &mmc3 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 75a3ac3ef169..0d82f0993214 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -45,6 +45,27 @@ }; }; + /* Regulator to trigger the WIFI_PDN signal of the Wifi module */ + lbee1usjyc_pdn: lbee1usjyc_pdn { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc-pdn"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + }; + + /* Regulator to trigger the RESET_N_W signal of the Wifi module */ + lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc-reset-n-w"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */ + enable-active-high; + }; + /* HS USB Port 1 Power */ hsusb1_power: hsusb1_power_reg { compatible = "regulator-fixed"; @@ -150,6 +171,14 @@ >; }; + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */ + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ + >; + }; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ @@ -218,6 +247,16 @@ }; }; +/* On board Wifi module */ +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>; + vmmc-supply = <&lbee1usjyc_pdn>; + vmmc_aux-supply = <&lbee1usjyc_reset_n_w>; + bus-width = <4>; + non-removable; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index d7527b63b8d3..cc2a37437196 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -44,9 +44,38 @@ default-state = "off"; }; }; + + /* Regulator to trigger the WIFI_PDN signal of the Wifi module */ + lbee1usjyc_pdn: lbee1usjyc_pdn { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc-pdn"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + }; + + /* Regulator to trigger the RESET_N_W signal of the Wifi module */ + lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc-reset-n-w"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */ + enable-active-high; + }; }; &omap3_pmx_core { + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */ + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ + >; + }; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ @@ -65,6 +94,16 @@ }; }; +/* On board Wifi module */ +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>; + vmmc-supply = <&lbee1usjyc_pdn>; + vmmc_aux-supply = <&lbee1usjyc_reset_n_w>; + bus-width = <4>; + non-removable; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; -- cgit v1.2.3 From 8647f2bc0156e17f9536c314792d123166871007 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:46 +0100 Subject: ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file. Use the omap3-igep0030-common.dtsi file and remove repeated parts leaving the nodes that are not common between IGEP COM MODULE hardware revisions. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0030-common.dtsi | 60 ++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-igep0030.dts | 58 +++++---------------------- 2 files changed, 69 insertions(+), 49 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-igep0030-common.dtsi diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi new file mode 100644 index 000000000000..0cb1527c39d4 --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -0,0 +1,60 @@ +/* + * Common Device Tree Source for IGEP COM MODULE + * + * Copyright (C) 2014 Javier Martinez Canillas + * Copyright (C) 2014 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-igep.dtsi" + +/ { + leds: gpio_leds { + compatible = "gpio-leds"; + + user0 { + label = "omap3:red:user0"; + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ + default-state = "off"; + }; + + user1 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */ + default-state = "off"; + }; + + user2 { + label = "omap3:red:user1"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */ + default-state = "off"; + }; + }; +}; + +&omap3_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ + OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ + OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ + >; + }; +}; + +&omap3_pmx_core2 { + leds_core2_pins: pinmux_leds_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index cc2a37437196..8150f47ccdf5 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -9,42 +9,12 @@ * published by the Free Software Foundation. */ -#include "omap3-igep.dtsi" +#include "omap3-igep0030-common.dtsi" / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; - leds { - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; - compatible = "gpio-leds"; - - boot { - label = "omap3:green:boot"; - gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - user0 { - label = "omap3:red:user0"; - gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ - default-state = "off"; - }; - - user1 { - label = "omap3:green:user1"; - gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */ - default-state = "off"; - }; - - user2 { - label = "omap3:red:user1"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - /* Regulator to trigger the WIFI_PDN signal of the Wifi module */ lbee1usjyc_pdn: lbee1usjyc_pdn { compatible = "regulator-fixed"; @@ -75,22 +45,16 @@ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ >; }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ - OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ - OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */ - OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ - >; - }; }; -&omap3_pmx_core2 { - leds_pins: pinmux_leds_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ - >; +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_core2_pins>; + + boot { + label = "omap3:green:boot"; + gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; /* LEDSYNC */ + default-state = "on"; }; }; @@ -104,7 +68,3 @@ non-removable; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; -- cgit v1.2.3 From f19ed8e0eeed7b7883e359a758d01eb723d0c698 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:47 +0100 Subject: ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G Add support for the new hardware revision of the IGEP COM MODULE. Basically, the new revision G replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 67 ++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-igep0030-rev-g.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..454feb61217e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -303,6 +303,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ + omap3-igep0030-rev-g.dtb \ omap3-ldp.dtb \ omap3-lilly-dbb056.dtb \ omap3-n900.dtb \ diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts new file mode 100644 index 000000000000..9326b282c94a --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -0,0 +1,67 @@ +/* + * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) + * + * Copyright (C) 2014 Javier Martinez Canillas + * Copyright (C) 2014 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-igep0030-common.dtsi" + +/ { + model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + + /* Regulator to trigger the WL_EN signal of the Wifi module */ + lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbep5clwmc-wlen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */ + enable-active-high; + }; +}; + +&omap3_pmx_core { + lbep5clwmc_pins: pinmux_lbep5clwmc_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */ + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */ + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */ + >; + }; + +}; + +&i2c2 { + status = "disabled"; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins &leds_core2_pins>; + + boot { + label = "omap3:green:boot"; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>; + vmmc-supply = <&lbep5clwmc_wlen>; + bus-width = <4>; + non-removable; +}; -- cgit v1.2.3 From ebc13bf2e0d261a93d25451e02e126a87fe88e28 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:48 +0100 Subject: ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file. Use the omap3-igep0020-common.dtsi file and remove repeated parts leaving the nodes that are not common between IGEPv2 hardware revisions. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020-common.dtsi | 246 +++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-igep0020.dts | 222 +----------------------- 2 files changed, 247 insertions(+), 221 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-igep0020-common.dtsi diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi new file mode 100644 index 000000000000..e458c2185e3c --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -0,0 +1,246 @@ +/* + * Common Device Tree Source for IGEPv2 + * + * Copyright (C) 2014 Javier Martinez Canillas + * Copyright (C) 2014 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-igep.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + compatible = "gpio-leds"; + + boot { + label = "omap3:green:boot"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + user1 { + label = "omap3:red:user1"; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + user2 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; + }; + }; + + /* HS USB Port 1 Power */ + hsusb1_power: hsusb1_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ + vcc-supply = <&hsusb1_power>; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &tfp410_pins + &dss_dpi_pins + >; + + tfp410_pins: pinmux_tfp410_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_pins + >; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ + OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */ + OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */ + OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */ + OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */ + OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ + >; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x20000000>, + <5 0 0x2c000000 0x01000000>; + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&smsc9221_pins>; + reg = <5 0 0xff>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; + +&dss { + status = "ok"; + + port { + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 0d82f0993214..fea7f7edb45d 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -9,42 +9,12 @@ * published by the Free Software Foundation. */ -#include "omap3-igep.dtsi" -#include "omap-gpmc-smsc9221.dtsi" +#include "omap3-igep0020-common.dtsi" / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; - leds { - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; - compatible = "gpio-leds"; - - boot { - label = "omap3:green:boot"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - user0 { - label = "omap3:red:user0"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - user1 { - label = "omap3:red:user1"; - gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - user2 { - label = "omap3:green:user1"; - gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; - }; - }; - /* Regulator to trigger the WIFI_PDN signal of the Wifi module */ lbee1usjyc_pdn: lbee1usjyc_pdn { compatible = "regulator-fixed"; @@ -65,112 +35,9 @@ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */ enable-active-high; }; - - /* HS USB Port 1 Power */ - hsusb1_power: hsusb1_power_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb1_vbus"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */ - startup-delay-us = <70000>; - }; - - /* HS USB Host PHY on PORT 1 */ - hsusb1_phy: hsusb1_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ - vcc-supply = <&hsusb1_power>; - }; - - tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &tfp410_pins - &dss_dpi_pins - >; - - tfp410_pins: pinmux_tfp410_pins { - pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ - >; - }; - - dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < - 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ - >; - }; - lbee1usjyc_pins: pinmux_lbee1usjyc_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */ @@ -189,64 +56,6 @@ }; }; -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = < - &hsusbb1_pins - >; - - hsusbb1_pins: pinmux_hsusbb1_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ - OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ - OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */ - OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */ - OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */ - OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */ - OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */ - OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */ - OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */ - OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */ - OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */ - OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ - >; - }; - - leds_pins: pinmux_leds_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ - >; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in the EEPROM - * as EDID data. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&gpmc { - ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */ - <5 0 0x2c000000 0x01000000>; - - ethernet@gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&smsc9221_pins>; - reg = <5 0 0xff>; - interrupt-parent = <&gpio6>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - }; -}; - /* On board Wifi module */ &mmc2 { pinctrl-names = "default"; @@ -256,32 +65,3 @@ bus-width = <4>; non-removable; }; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; - -&usbhshost { - port1-mode = "ehci-phy"; -}; - -&usbhsehci { - phys = <&hsusb1_phy>; -}; - -&vpll2 { - /* Needed for DSS */ - regulator-name = "vdds_dsi"; -}; - -&dss { - status = "ok"; - - port { - dpi_out: endpoint { - remote-endpoint = <&tfp410_in>; - data-lines = <24>; - }; - }; -}; -- cgit v1.2.3 From a7098bedd5522d0c498a09188a5625f8601adda8 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:49 +0100 Subject: ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F Add support for the new hardware revision of the IGEPv2. Basically, the new revision F replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 45 ++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-igep0020-rev-f.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 454feb61217e..fb192713e73b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -302,6 +302,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-ha.dtb \ omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ + omap3-igep0020-rev-f.dtb \ omap3-igep0030.dtb \ omap3-igep0030-rev-g.dtb \ omap3-ldp.dtb \ diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts new file mode 100644 index 000000000000..cc8bd0cd8cf8 --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -0,0 +1,45 @@ +/* + * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x) + * + * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-igep0020-common.dtsi" + +/ { + model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3"; + + /* Regulator to trigger the WL_EN signal of the Wifi module */ + lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbep5clwmc-wlen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */ + enable-active-high; + }; +}; + +&omap3_pmx_core { + lbep5clwmc_pins: pinmux_lbep5clwmc_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4) /* mcspi1_cs3.gpio_177 - W_IRQ */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */ + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */ + >; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>; + vmmc-supply = <&lbep5clwmc_wlen>; + bus-width = <4>; + non-removable; +}; -- cgit v1.2.3 From fc8c28af38a28c5bc36b76680630e31234740474 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:50 +0100 Subject: ARM: dts: omap3-igep00x0: Remove i2c2 node. We can't suppose that the i2c2 pins are configured as I2C bus, these pins are connected to expansion connectors. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 6118e7fd71b2..8a63ad2286aa 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -92,13 +92,6 @@ >; }; - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ - 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ - >; - }; - i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ @@ -177,12 +170,6 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - clock-frequency = <400000>; -}; - &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; -- cgit v1.2.3 From d565b5f4e50bfbb93408afb0502176021759bcd2 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:51 +0100 Subject: ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device. Add btwilink device for IGEPv2 Rev. F and IGEP COM MODULE Rev. G. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 36 ++++++++++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index c95346c94829..e72f0fc91b02 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -139,8 +140,38 @@ static void __init omap3_sbc_t3530_legacy_init(void) omap_ads7846_init(1, 57, 0, NULL); } -static void __init omap3_igep0020_legacy_init(void) +struct ti_st_plat_data wilink_pdata = { + .nshutdown_gpio = 137, + .dev_name = "/dev/ttyO1", + .flow_cntrl = 1, + .baud_rate = 300000, +}; + +static struct platform_device wl18xx_device = { + .name = "kim", + .id = -1, + .dev = { + .platform_data = &wilink_pdata, + } +}; + +static struct platform_device btwilink_device = { + .name = "btwilink", + .id = -1, +}; + +static void __init omap3_igep0020_rev_f_legacy_init(void) +{ + legacy_init_wl12xx(0, 0, 177); + platform_device_register(&wl18xx_device); + platform_device_register(&btwilink_device); +} + +static void __init omap3_igep0030_rev_g_legacy_init(void) { + legacy_init_wl12xx(0, 0, 136); + platform_device_register(&wl18xx_device); + platform_device_register(&btwilink_device); } static void __init omap3_evm_legacy_init(void) @@ -393,7 +424,8 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n900", nokia_n900_legacy_init, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, - { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, + { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, + { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, -- cgit v1.2.3 From 5a0f93c6576a83d8d07c1b569641934294439ac0 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 7 Nov 2014 11:47:13 -0600 Subject: ARM: dts: Add am57xx-beagle-x15 BeagleBoard-X15 is the next generation Open Source Hardware BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15 processor. The platform features 2GB DDR3L (w/dual 32bit busses), eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G Ethernet. For more information, refer to: BeagleBoard-X15 Wiki: http://www.elinux.org/Beagleboard:BeagleBoard-X15 AM5728 is part of the Sitara product family whose additional details will be available: http://www.ti.com/lsds/ti/arm/overview.page Technical Reference Manual for AM5728 is public domain at: http://www.ti.com/lit/spruhz6 Just add basic support for the moment, the following updates are needed: i) Ethernet - depends on SoC dts fixes ii) USB Client (USB2) - depends on GPIO extcon ii) HDMI - additional driver fixes pending iii) Audio - additional driver fixes pending NOTE: AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All unused power supply balls must be supplied with the voltages specified in the Section 5.2, Recommended Operating Conditions". This implies that all unused voltage rails for AM5728 can never be switched off even if the hardware blocks inside that voltage domain is unused. Switching off these unused rails may result in stability issues on other domains and increased leakage and power-on-hour impacts. Signed-off-by: Felipe Balbi Signed-off-by: Nishanth Menon Reviewed-by: Tom Rini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am57xx-beagle-x15.dts | 405 ++++++++++++++++++++++++++++++++ 2 files changed, 406 insertions(+) create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index fb192713e73b..a77cec87acbd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -349,6 +349,7 @@ dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \ + am57xx-beagle-x15.dtb \ dra72-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts new file mode 100644 index 000000000000..49edbda68cd5 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -0,0 +1,405 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra74x.dtsi" +#include +#include +#include + +/ { + model = "TI AM5728 BeagleBoard-X15"; + compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + rtc0 = &mcp_rtc; + rtc1 = &tps659038_rtc; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + vdd_3v3: fixedregulator-vdd_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + vin-supply = <®en1>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vtt_fixed: fixedregulator-vtt { + /* TPS51200 */ + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + vin-supply = <&smps3_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led@0 { + label = "beagle-x15:usr0"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@1 { + label = "beagle-x15:usr1"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@2 { + label = "beagle-x15:usr2"; + gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "beagle-x15:usr3"; + gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ide-disk"; + default-state = "off"; + }; + }; +}; + +&dra7_pmx_core { + leds_pins_default: leds_pins_default { + pinctrl-single,pins = < + 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ + 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ + 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ + 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ + >; + }; + + i2c1_pins_default: i2c1_pins_default { + pinctrl-single,pins = < + 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ + 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ + >; + }; + + i2c3_pins_default: i2c3_pins_default { + pinctrl-single,pins = < + 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ + 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ + >; + }; + + uart3_pins_default: uart3_pins_default { + pinctrl-single,pins = < + 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ + 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ + >; + }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + tps659038_pins_default: tps659038_pins_default { + pinctrl-single,pins = < + 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ + >; + }; + + tmp102_pins_default: tmp102_pins_default { + pinctrl-single,pins = < + 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ + >; + }; + + mcp79410_pins_default: mcp79410_pins_default { + pinctrl-single,pins = < + 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tps659038_pins_default>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps12_reg: smps12 { + /* VDD_MPU */ + regulator-name = "smps12"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_DDR */ + regulator-name = "smps3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_CORE */ + regulator-name = "smps6"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-always-on; + regulator-boot-on; + }; + + /* SMPS7 unused */ + + smps8_reg: smps8 { + /* VDD_1V8 */ + regulator-name = "smps8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* SMPS9 unused */ + + ldo1_reg: ldo1 { + /* VDD_SD */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* VDD_SHV5 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + regen1: regen1 { + /* VDD_3V3_ON */ + regulator-name = "regen1"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659038_rtc: tps659038_rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&tps659038>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + }; + + tmp102: tmp102@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&tmp102_pins_default>; + interrupt-parent = <&gpio7>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_default>; + clock-frequency = <400000>; + + mcp_rtc: rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + interrupt-parent = <&gic>; + interrupts = ; /* IRQ_SYS_1N */ + + pinctrl-names = "default"; + pinctrl-0 = <&mcp79410_pins_default>; + + vcc-supply = <&vdd_3v3>; + wakeup-source; + }; +}; + +&gpio7 { + ti,no-reset-on-init; + ti,no-idle-on-init; +}; + +&cpu0 { + cpu0-supply = <&smps12_reg>; + voltage-tolerance = <1>; +}; + +&uart3 { + status = "okay"; + interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x248>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_default>; +}; + +&mmc1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + vmmc-supply = <&ldo1_reg>; + vmmc_aux-supply = <&vdd_3v3>; + pbias-supply = <&pbias_mmc_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 0>; /* gpio 219 */ +}; + +&mmc2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + + vmmc-supply = <&vdd_3v3>; + bus-width = <8>; + ti,non-removable; + cap-mmc-dual-data-rate; +}; + +&sata { + status = "okay"; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; -- cgit v1.2.3 From 065bd7fe50de5e6d0fd5034cbc87120a558a1219 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 21 Oct 2014 11:18:15 -0500 Subject: ARM: dts: DRA7: Add aliases for all serial ports Add serial port aliases for consoles > 6. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c6fc56618599..9cd99b931302 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -34,6 +34,10 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + serial8 = &uart9; + serial9 = &uart10; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; }; -- cgit v1.2.3 From 1ccd653c30a42291ad3f8088c360770bde28ce9e Mon Sep 17 00:00:00 2001 From: "Joe.C" Date: Tue, 11 Nov 2014 15:53:41 +0800 Subject: ARM: mediatek: Add basic support for mt8127 This adds a basic dtsi for MT8127 SoC. Signed-off-by: Joe.C Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8127.dtsi | 94 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mediatek/mediatek.c | 1 + 2 files changed, 95 insertions(+) create mode 100644 arch/arm/boot/dts/mt8127.dtsi diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi new file mode 100644 index 000000000000..b24c0a2f3c44 --- /dev/null +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Joe.C + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include "skeleton64.dtsi" + +/ { + compatible = "mediatek,mt8127"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + timer: timer@10008000 { + compatible = "mediatek,mt8127-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x80>; + interrupts = ; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10212000 0 0x1000>, + <0 0x10214000 0 0x2000>, + <0 0x10216000 0 0x2000>; + }; + }; +}; diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index f2acf075350d..7f478cea0655 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -19,6 +19,7 @@ static const char * const mediatek_board_dt_compat[] = { "mediatek,mt6589", + "mediatek,mt8127", NULL, }; -- cgit v1.2.3 From 8e00aec82843f46adfd0e548bb907357ecaa3acd Mon Sep 17 00:00:00 2001 From: "Joe.C" Date: Tue, 11 Nov 2014 15:53:42 +0800 Subject: ARM: mediatek: add dts for 8127 Moose board Moose is a tablet evalutation board based on MT8127 SoC. Signed-off-by: Joe.C Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8127-moose.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 arch/arm/boot/dts/mt8127-moose.dts diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts new file mode 100644 index 000000000000..13cba0e77e08 --- /dev/null +++ b/arch/arm/boot/dts/mt8127-moose.dts @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Joe.C + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt8127.dtsi" + +/ { + model = "MediaTek MT8127 Moose Board"; + compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; + + memory { + reg = <0 0x80000000 0 0x40000000>; + }; +}; -- cgit v1.2.3 From 0c3fb20356042929fb013641cd00d8e9d16ae000 Mon Sep 17 00:00:00 2001 From: "Joe.C" Date: Tue, 11 Nov 2014 15:53:43 +0800 Subject: ARM: mediatek: Add basic support for mt8135 This adds a basic dtsi for MT8135 based SoC. Signed-off-by: Joe.C Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8135.dtsi | 116 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mediatek/mediatek.c | 1 + 2 files changed, 117 insertions(+) create mode 100644 arch/arm/boot/dts/mt8135.dtsi diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi new file mode 100644 index 000000000000..7d56a986358e --- /dev/null +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -0,0 +1,116 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Joe.C + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include "skeleton64.dtsi" + +/ { + compatible = "mediatek,mt8135"; + interrupt-parent = <&gic>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu2>; + }; + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x001>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + }; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + timer: timer@10008000 { + compatible = "mediatek,mt8135-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x80>; + interrupts = ; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10212000 0 0x1000>, + <0 0x10214000 0 0x2000>, + <0 0x10216000 0 0x2000>; + }; + }; +}; diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 7f478cea0655..48051a205414 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -20,6 +20,7 @@ static const char * const mediatek_board_dt_compat[] = { "mediatek,mt6589", "mediatek,mt8127", + "mediatek,mt8135", NULL, }; -- cgit v1.2.3 From d51f42615cd6c74e37a8d9345a668f89f79bcf7e Mon Sep 17 00:00:00 2001 From: "Joe.C" Date: Tue, 11 Nov 2014 15:53:44 +0800 Subject: ARM: mediatek: add dts for MT8135 evaluation board. Evbp1 is a tablet evaluation board based on MT8135 SoC. Signed-off-by: Joe.C Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8135-evbp1.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 arch/arm/boot/dts/mt8135-evbp1.dts diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts new file mode 100644 index 000000000000..a5adf9742308 --- /dev/null +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Joe.C + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt8135.dtsi" + +/ { + model = "MediaTek MT8135 evaluation board"; + compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; + + memory { + reg = <0 0x80000000 0 0x40000000>; + }; +}; -- cgit v1.2.3 From b32ef1d4e33fa951c4472d62d4e75570bd686dbc Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:07 +0100 Subject: ARM: dtsi: sunxi: add common VBUS regulator Until now the regulator nodes for powering USB VBUS existed only for the two host controllers. Now the regulator is added for USB OTG too. Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index fa69adfea7fc..be5cfa335ae4 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -57,6 +57,13 @@ allwinner,pull = <0>; }; + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PB9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + usb1_vbus_pin_a: usb1_vbus_pin@0 { allwinner,pins = "PH6"; allwinner,function = "gpio_out"; @@ -85,6 +92,18 @@ status = "disabled"; }; + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_vbus_pin_a>; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 1 9 0>; + status = "disabled"; + }; + reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; -- cgit v1.2.3 From 1b218fa626f2c08f67be794480a0867a06657992 Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:08 +0100 Subject: ARM: sun7i: dtsi: add support for usbphy0 Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 8605f2b175ed..7e30e267c317 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -544,8 +544,8 @@ reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>, <&usb_clk 2>; - reset-names = "usb1_reset", "usb2_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; -- cgit v1.2.3 From 9eb1e2705bfcfc995b9532915fb2bb06a698b1f1 Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:09 +0100 Subject: ARM: dts: sun7i: Cubietruck: override regulator pin Cubietruck uses different pin for the USB OTG VBUS that is why we override the one defined in sunxi-common-regulators.dtsi Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index a6c1a3c717bc..16823078bf28 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -92,6 +92,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; pwm: pwm@01c20e00 { @@ -185,6 +192,12 @@ status = "okay"; }; + reg_usb0_vbus: usb0-vbus { + pinctrl-0 = <&usb0_vbus_pin_a>; + gpio = <&pio 7 17 0>; + status = "okay"; + }; + reg_usb1_vbus: usb1-vbus { status = "okay"; }; -- cgit v1.2.3 From a7679b6ce7870e8dfb16651341ebbbb98e507627 Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:10 +0100 Subject: ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUS Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 16823078bf28..a281d259b9b8 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -40,6 +40,7 @@ }; usbphy: phy@01c13400 { + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3 From 6df127f37c21596321ad46376e3aea1548084e04 Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Sat, 8 Nov 2014 01:44:56 +0100 Subject: ARM: dts: rockchip: fix invalid unit-address in rk3188.dtsi Unit addresses, whilst written in hex, don't contain a 0x prefix. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index b24e04f6ccc7..1d4d79c6688d 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -111,7 +111,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@0x2000a000 { + gpio0: gpio0@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = ; @@ -124,7 +124,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@0x2003c000 { + gpio1: gpio1@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = ; -- cgit v1.2.3 From 0d716ea960e55bacbcd1ae93e4c6186dfe4b65a8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 13 Nov 2014 10:31:43 +0100 Subject: ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This avoids it getting briefly turned off between when the regulator getting registered and the ahci driver turning it back on, thus avoiding the disk going into emergency head park mode. Reported-by: Bruno Prémont Tested-by: Bruno Prémont Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index be5cfa335ae4..d8876634f965 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -87,6 +87,7 @@ regulator-name = "ahci-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 1 8 0>; status = "disabled"; -- cgit v1.2.3 From 5070ac3ee2e987a9704d8d908731f11ed07399f4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 13 Nov 2014 10:31:48 +0100 Subject: ARM: dts: sun6i: Add EHCI support for the M9 board The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal usb wifi card, the other to a build-in usb-hub, so neither need their OHCI companion controller to be enabled since the are always connected at USB-2 speeds. The controller which is attached to the wifi also does not need a vbus regulator. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-m9.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index c887be6cea3d..e81eed328c82 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -68,6 +68,19 @@ status = "okay"; }; + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + ehci1: usb@01c1b000 { + status = "okay"; + }; + pio: pinctrl@01c20800 { mmc0_cd_pin_m9: mmc0_cd_pin@0 { allwinner,pins = "PH22"; @@ -75,6 +88,13 @@ allwinner,drive = <0>; allwinner,pull = <1>; }; + + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@01c28000 { @@ -83,4 +103,11 @@ status = "okay"; }; }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 0>; + status = "okay"; + }; }; -- cgit v1.2.3 From 90795c560d83f5489e64db21f75970d1746b0559 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 13 Nov 2014 10:31:49 +0100 Subject: ARM: dts: sun6i: Add support for the status led The Mele M9 / A1000G quad has a blue status led, add support for this. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-m9.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index e81eed328c82..66bb7c918e20 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -82,6 +82,13 @@ }; pio: pinctrl@01c20800 { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + mmc0_cd_pin_m9: mmc0_cd_pin@0 { allwinner,pins = "PH22"; allwinner,function = "gpio_in"; @@ -104,6 +111,17 @@ }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; + + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 0>; + }; + }; + reg_usb1_vbus: usb1-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; -- cgit v1.2.3 From 04a5656fbcc960a519674f05d5458e6013d67467 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 12 Nov 2014 17:59:34 +0900 Subject: ARM: shmobile: armadillo800eva: Use keyboard as gpio-keys node name This appears to be the best match for ePAPR. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2703428557fc..e183a33b5397 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -78,7 +78,7 @@ regulator-boot-on; }; - gpio-keys { + keyboard { compatible = "gpio-keys"; power-key { -- cgit v1.2.3 From 54caf6810327451ea814fd728c45c99755252237 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 12 Nov 2014 17:59:35 +0900 Subject: ARM: shmobile: lager: Use keyboard as gpio-keys node name This appears to be the best match for ePAPR. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 854c13e3e6c0..701235461641 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -43,7 +43,7 @@ #size-cells = <1>; }; - gpio_keys { + keyboard { compatible = "gpio-keys"; button@1 { -- cgit v1.2.3 From d3aaec8365c72925645260d3a474140a06a267f4 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 12 Nov 2014 17:59:36 +0900 Subject: ARM: shmobile: koelsch: Use keyboard as gpio-keys node name This appears to be the best match for ePAPR. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 9497cc2c51f1..a903185f7327 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -44,7 +44,7 @@ #size-cells = <1>; }; - gpio-keys { + keyboard { compatible = "gpio-keys"; key-1 { -- cgit v1.2.3 From 61f1fb47bdbcf145dd539d29cfa7f3294bd5e958 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 12 Nov 2014 17:59:37 +0900 Subject: ARM: shmobile: kzm9g-reference: Use keyboard as gpio-keys node name This appears to be the best match for ePAPR. Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 8c913d9b1824..3721cd433601 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -113,7 +113,7 @@ }; }; - gpio-keys { + keyboard { compatible = "gpio-keys"; back-key { -- cgit v1.2.3 From e69948064a52ca670cf069aa74bf409b33767cb9 Mon Sep 17 00:00:00 2001 From: "Joe.C" Date: Tue, 4 Nov 2014 15:30:53 +0800 Subject: ARM: dts: Build dtb for mt8127 & mt8135 This allows the "make dtbs" to build the moose and mt8135-evbp1 for MediaTek SoC Signed-off-by: Joe.C Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..d2e6b2ff160e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -515,7 +515,9 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb -dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \ + mt8127-moose.dtb \ + mt8135-evbp1.dtb targets += dtbs dtbs_install targets += $(dtb-y) -- cgit v1.2.3 From 491374c67817796785a2403a0d7825c50a39f6ce Mon Sep 17 00:00:00 2001 From: "Joe.C" Date: Tue, 4 Nov 2014 15:30:52 +0800 Subject: dt-bindings: add more chips in documentation for Mediatek SoC Add MT8127 & MT8135 from Mediatek. Signed-off-by: Joe.C Signed-off-by: Matthias Brugger --- Documentation/devicetree/bindings/arm/mediatek.txt | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index fa252261dfaf..c549c1e5e7c9 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -1,10 +1,13 @@ -Mediatek MT6589 Platforms Device Tree Bindings +MediaTek mt65xx & mt81xx Platforms Device Tree Bindings -Boards with a SoC of the Mediatek MT6589 shall have the following property: +Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property: Required root node property: -compatible: must contain "mediatek,mt6589" +compatible: Must contain one of + "mediatek,mt6589" + "mediatek,mt8127" + "mediatek,mt8135" Supported boards: @@ -12,3 +15,9 @@ Supported boards: - bq Aquaris5 smart phone: Required root node properties: - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; +- MTK mt8127 tablet moose EVB: + Required root node properties: + - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; +- MTK mt8135 tablet EVB: + Required root node properties: + - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; -- cgit v1.2.3 From 4542172e8d7da0733ba50ead5ec16d0998903b2d Mon Sep 17 00:00:00 2001 From: Howard Chen Date: Fri, 14 Nov 2014 13:14:52 +0800 Subject: ARM: mediatek: Add basic support for mt6592 * A dtsi for boards based on Mediatek MT6592 SoCs * Compatible string in arch/arm/mach-mediatek/mediatek.c Signed-off-by: Howard Chen Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt6592.dtsi | 98 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mediatek/mediatek.c | 1 + 2 files changed, 99 insertions(+) create mode 100644 arch/arm/boot/dts/mt6592.dtsi diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi new file mode 100644 index 000000000000..31e5a0979d78 --- /dev/null +++ b/arch/arm/boot/dts/mt6592.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Howard Chen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include "skeleton.dtsi" + +/ { + compatible = "mediatek,mt6592"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x4>; + }; + cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x5>; + }; + cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x6>; + }; + cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x7>; + }; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = ; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x10211000 0x1000>, + <0x10212000 0x1000>; + }; + +}; + diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 48051a205414..a9549005097e 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -19,6 +19,7 @@ static const char * const mediatek_board_dt_compat[] = { "mediatek,mt6589", + "mediatek,mt6592", "mediatek,mt8127", "mediatek,mt8135", NULL, -- cgit v1.2.3 From 1a8c9614f80d98b99994f5593b2e92206a70c764 Mon Sep 17 00:00:00 2001 From: Howard Chen Date: Fri, 14 Nov 2014 13:14:53 +0800 Subject: ARM: mediatek: add dts for mt6592-evb The mt6592-evb is an evaluation board based on the MT6592 SoC. Signed-off-by: Howard Chen Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/mt6592-evb.dts | 26 ++++++++++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 arch/arm/boot/dts/mt6592-evb.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d2e6b2ff160e..e1ede4ff83cc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -516,6 +516,7 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \ + mt6592-evb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts new file mode 100644 index 000000000000..b57237e6394a --- /dev/null +++ b/arch/arm/boot/dts/mt6592-evb.dts @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Howard Chen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt6592.dtsi" + +/ { + model = "mt6592 evb"; + compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; + -- cgit v1.2.3 From 256e7653c8bac60f1ccf9e0a58cc45b01a7954b9 Mon Sep 17 00:00:00 2001 From: Howard Chen Date: Fri, 14 Nov 2014 13:14:54 +0800 Subject: dt-bindings: add documentation for Mediatek SoC This adds a DT binding documentation for the MT6592 SoC from Mediatek. Signed-off-by: Howard Chen Signed-off-by: Matthias Brugger --- Documentation/devicetree/bindings/arm/mediatek.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index c549c1e5e7c9..3be40139cfbb 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -6,6 +6,7 @@ Required root node property: compatible: Must contain one of "mediatek,mt6589" + "mediatek,mt6592" "mediatek,mt8127" "mediatek,mt8135" @@ -15,6 +16,9 @@ Supported boards: - bq Aquaris5 smart phone: Required root node properties: - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; +- Evaluation board for MT6592: + Required root node properties: + - compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; - MTK mt8127 tablet moose EVB: Required root node properties: - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; -- cgit v1.2.3 From efb66e93d13da5a7b11b3a8dbb24a6fb29141752 Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Fri, 14 Nov 2014 16:32:25 +0100 Subject: ARM: dts: rockchip: enable PWM on Radxa Rock This enables user space access to the 3 PWM available on the Radxa Rock headers. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188-radxarock.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 0950a0524947..6eb62c053055 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -243,6 +243,18 @@ disable-wp; }; +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + &pinctrl { pcfg_output_low: pcfg-output-low { output-low; -- cgit v1.2.3 From c30c619da3994dce5c274428c41b48f4ecf1c9ab Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 13 Nov 2014 02:08:32 +0800 Subject: ARM: sun6i: DT: Add PLL6 multiple outputs PLL6 on sun6i has multiple outputs, just like the other sunxi platforms. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a674b0fc6232..f1519a8a2ac7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -132,11 +132,11 @@ }; pll6: clk@01c20028 { - #clock-cells = <0>; + #clock-cells = <1>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; - clock-output-names = "pll6"; + clock-output-names = "pll6", "pll6x2"; }; cpu: cpu@01c20050 { @@ -166,7 +166,7 @@ #clock-cells = <0>; compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1_mux"; }; @@ -221,7 +221,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; clock-output-names = "apb2"; }; @@ -240,7 +240,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc0"; }; @@ -248,7 +248,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc1"; }; @@ -256,7 +256,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc2"; }; @@ -264,7 +264,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc3"; }; @@ -272,7 +272,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi0"; }; @@ -280,7 +280,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi1"; }; @@ -288,7 +288,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi2"; }; @@ -296,7 +296,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi3"; }; @@ -356,7 +356,7 @@ /* DMA controller requires AHB1 clocked from PLL6 */ assigned-clocks = <&ahb1_mux>; - assigned-clock-parents = <&pll6>; + assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { @@ -836,7 +836,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; clock-output-names = "ar100"; }; -- cgit v1.2.3 From 2f28e337651173680c6f045c3d598eaf17b764bb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 16 Nov 2014 20:49:01 +0100 Subject: ARM: dts: sun6i: Add ethernet support to M9 board The Mele M9 has an ethernet board, enable it. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-m9.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 66bb7c918e20..3ab544f3af4a 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -109,6 +109,18 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + gmac: ethernet@01c30000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; }; leds { -- cgit v1.2.3 From 401a52694ef759630def9c8ca0ce739c290d9d66 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:47:00 +0100 Subject: ARM: STi: DT: STiH416: Add pinctl setup for usb controllers. This patch adds the required pin config for all usb controllers on the stih416. Signed-off-by: Peter Griffin Acked-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416-pinctrl.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index c2025bc37dd5..9cccf2d6aa26 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -147,6 +147,15 @@ }; }; + usb { + pinctrl_usb3: usb3 { + st,pins { + oc-detect = <&pio40 0 ALT1 IN>; + pwr-enable = <&pio40 1 ALT1 OUT>; + }; + }; + }; + sbc_i2c1 { pinctrl_sbc_i2c1_default: sbc_i2c1-default { st,pins { @@ -318,6 +327,16 @@ }; }; + usb { + pinctrl_usb0: usb0 { + st,pins { + oc-detect = <&pio9 4 ALT1 IN>; + pwr-enable = <&pio9 5 ALT1 OUT>; + }; + }; + }; + + i2c1 { pinctrl_i2c1_default: i2c1-default { st,pins { @@ -506,6 +525,21 @@ }; }; }; + + usb { + pinctrl_usb1: usb1 { + st,pins { + oc-detect = <&pio18 0 ALT1 IN>; + pwr-enable = <&pio18 1 ALT1 OUT>; + }; + }; + pinctrl_usb2: usb2 { + st,pins { + oc-detect = <&pio18 2 ALT1 IN>; + pwr-enable = <&pio18 3 ALT1 OUT>; + }; + }; + }; }; pin-controller-fvdp-fe { -- cgit v1.2.3 From 7701677e315924bde68884be643156fcefccacb9 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:47:00 +0100 Subject: ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy This usb picophy is found on stih415/6 SoC. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 1137bdfcca1c..ff2ad35a5aa2 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -316,5 +316,13 @@ status = "disabled"; }; + + usb2_phy: phy@0 { + compatible = "st,stih416-usb-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_rear>; + clocks = <&clk_sysin>; + clock-names = "osc_phy"; + }; }; }; -- cgit v1.2.3 From 18221b8259a1987a49db41e26a7d60f183ca9f92 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:47:00 +0100 Subject: ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers. This patch adds the DT nodes for the 4 usb ehci and ohci usb controllers on the stih416 SoC. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416.dtsi | 121 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 121 insertions(+) diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index ff2ad35a5aa2..2bdda522c4f0 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -324,5 +324,126 @@ clocks = <&clk_sysin>; clock-names = "osc_phy"; }; + + ehci0: usb@fe1ffe00 { + compatible = "st,st-ehci-300x"; + reg = <0xfe1ffe00 0x100>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + resets = <&powerdown STIH416_USB0_POWERDOWN>, + <&softreset STIH416_USB0_SOFTRESET>; + reset-names = "power", "softreset"; + }; + + ohci0: usb@fe1ffc00 { + compatible = "st,st-ohci-300x"; + reg = <0xfe1ffc00 0x100>; + interrupts = ; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + status = "okay"; + resets = <&powerdown STIH416_USB0_POWERDOWN>, + <&softreset STIH416_USB0_SOFTRESET>; + reset-names = "power", "softreset"; + }; + + ehci1: usb@fe203e00 { + compatible = "st,st-ehci-300x"; + reg = <0xfe203e00 0x100>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + resets = <&powerdown STIH416_USB1_POWERDOWN>, + <&softreset STIH416_USB1_SOFTRESET>; + reset-names = "power", "softreset"; + }; + + ohci1: usb@fe203c00 { + compatible = "st,st-ohci-300x"; + reg = <0xfe203c00 0x100>; + interrupts = ; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + resets = <&powerdown STIH416_USB1_POWERDOWN>, + <&softreset STIH416_USB1_SOFTRESET>; + reset-names = "power", "softreset"; + }; + + ehci2: usb@fe303e00 { + compatible = "st,st-ehci-300x"; + reg = <0xfe303e00 0x100>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + resets = <&powerdown STIH416_USB2_POWERDOWN>, + <&softreset STIH416_USB2_SOFTRESET>; + reset-names = "power", "softreset"; + }; + + ohci2: usb@fe303c00 { + compatible = "st,st-ohci-300x"; + reg = <0xfe303c00 0x100>; + interrupts = ; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + resets = <&powerdown STIH416_USB2_POWERDOWN>, + <&softreset STIH416_USB2_SOFTRESET>; + reset-names = "power", "softreset"; + }; + + ehci3: usb@fe343e00 { + compatible = "st,st-ehci-300x"; + reg = <0xfe343e00 0x100>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + resets = <&powerdown STIH416_USB3_POWERDOWN>, + <&softreset STIH416_USB3_SOFTRESET>; + reset-names = "power", "softreset"; + }; + + ohci3: usb@fe343c00 { + compatible = "st,st-ohci-300x"; + reg = <0xfe343c00 0x100>; + interrupts = ; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + resets = <&powerdown STIH416_USB3_POWERDOWN>, + <&softreset STIH416_USB3_SOFTRESET>; + reset-names = "power", "softreset"; + }; }; }; -- cgit v1.2.3 From cc149f7ae2fa54b3d067527642146dde37977358 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:47:00 +0100 Subject: ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks Although most clock outputs are the same as stih407 SoC, stih410 also has some additional new clock outputs. Signed-off-by: Peter Griffin Acked-by: Lee Jones Signed-off-by: Maxime Coquelin --- include/dt-bindings/clock/stih410-clks.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/dt-bindings/clock/stih410-clks.h diff --git a/include/dt-bindings/clock/stih410-clks.h b/include/dt-bindings/clock/stih410-clks.h new file mode 100644 index 000000000000..2097a4bbe155 --- /dev/null +++ b/include/dt-bindings/clock/stih410-clks.h @@ -0,0 +1,25 @@ +/* + * This header provides constants clk index STMicroelectronics + * STiH410 SoC. + */ +#ifndef _DT_BINDINGS_CLK_STIH410 +#define _DT_BINDINGS_CLK_STIH410 + +#include "stih407-clks.h" + +/* STiH410 introduces new clock outputs compared to STiH407 */ + +/* CLOCKGEN C0 */ +#define CLK_TX_ICN_HADES 32 +#define CLK_RX_ICN_HADES 33 +#define CLK_ICN_REG_16 34 +#define CLK_PP_HADES 35 +#define CLK_CLUST_HADES 36 +#define CLK_HWPE_HADES 37 +#define CLK_FC_HADES 38 + +/* CLOCKGEN D0 */ +#define CLK_PCMR10_MASTER 4 +#define CLK_USB2_PHY 5 + +#endif -- cgit v1.2.3 From ef893c1a935950610cbae5a0e6d1d62e080413de Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:48:00 +0100 Subject: ARM: STi: DT: STiH410: Add pinctl config for usb controllers. This patch adds the required pin configiguration for the extra usb controllers found on the stih410 device. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih410-pinctrl.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 arch/arm/boot/dts/stih410-pinctrl.dtsi diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/stih410-pinctrl.dtsi new file mode 100644 index 000000000000..b3e9dfc81c07 --- /dev/null +++ b/arch/arm/boot/dts/stih410-pinctrl.dtsi @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Peter Griffin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +/ { + + soc { + pin-controller-rear { + + usb0 { + pinctrl_usb0: usb2-0 { + st,pins { + usb-oc-detect = <&pio35 0 ALT1 IN>; + usb-pwr-enable = <&pio35 1 ALT1 OUT>; + }; + }; + }; + + usb1 { + pinctrl_usb1: usb2-1 { + st,pins { + usb-oc-detect = <&pio35 2 ALT1 IN>; + usb-pwr-enable = <&pio35 3 ALT1 OUT>; + }; + }; + }; + }; + }; +}; -- cgit v1.2.3 From 2577451303cb29c82b3d4b1e4a9971f78f9e70e7 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:48:00 +0100 Subject: ARM: STi: DT: STih407: Abstract common dt nodes into shared files. The stih410 soc which will be added in the following commit is very similar to the stih407, to enable maximum re-use of the dt files this commit abstracts the common parts into a shared dt file stihxxx-b2120 for the board, and also a shared file stih407-family.dtsi for the SoC. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-b2120.dts | 53 +------ arch/arm/boot/dts/stih407-family.dtsi | 278 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stih407.dtsi | 279 ---------------------------------- arch/arm/boot/dts/stihxxx-b2120.dtsi | 59 +++++++ 4 files changed, 340 insertions(+), 329 deletions(-) create mode 100644 arch/arm/boot/dts/stih407-family.dtsi delete mode 100644 arch/arm/boot/dts/stih407.dtsi create mode 100644 arch/arm/boot/dts/stihxxx-b2120.dtsi diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index fe69f92e5f82..a3ad52b8de1c 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -7,7 +7,9 @@ * published by the Free Software Foundation. */ /dts-v1/; -#include "stih407.dtsi" +#include "stih407-clock.dtsi" +#include "stih407-family.dtsi" +#include "stihxxx-b2120.dtsi" / { model = "STiH407 B2120"; compatible = "st,stih407-b2120", "st,stih407"; @@ -26,53 +28,4 @@ ttyAS0 = &sbc_serial0; }; - soc { - sbc_serial0: serial@9530000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - red { - #gpio-cells = <2>; - label = "Front Panel LED"; - gpios = <&pio4 1 0>; - linux,default-trigger = "heartbeat"; - }; - green { - #gpio-cells = <2>; - gpios = <&pio1 3 0>; - default-state = "off"; - }; - }; - - i2c@9842000 { - status = "okay"; - }; - - i2c@9843000 { - status = "okay"; - }; - - i2c@9844000 { - status = "okay"; - }; - - i2c@9845000 { - status = "okay"; - }; - - i2c@9540000 { - status = "okay"; - }; - - /* SSC11 to HDMI */ - i2c@9541000 { - status = "okay"; - /* HDMI V1.3a supports Standard mode only */ - clock-frequency = <100000>; - st,i2c-min-scl-pulse-width-us = <0>; - st,i2c-min-sda-pulse-width-us = <5>; - }; - }; }; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi new file mode 100644 index 000000000000..3e31d32133b8 --- /dev/null +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -0,0 +1,278 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih407-pinctrl.dtsi" +#include +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + intc: interrupt-controller@08761000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x08761000 0x1000>, <0x08760100 0x100>; + }; + + scu@08760000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x08760000 0x1000>; + }; + + timer@08760200 { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-global-timer"; + reg = <0x08760200 0x100>; + interrupts = ; + clocks = <&arm_periph_clk>; + }; + + l2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x08762000 0x1000>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + cache-unified; + cache-level = <2>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + compatible = "simple-bus"; + + powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; + #reset-cells = <1>; + }; + + softreset: softreset-controller { + compatible = "st,stih407-softreset"; + #reset-cells = <1>; + }; + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + + syscfg_sbc: sbc-syscfg@9620000 { + compatible = "st,stih407-sbc-syscfg", "syscon"; + reg = <0x9620000 0x1000>; + }; + + syscfg_front: front-syscfg@9280000 { + compatible = "st,stih407-front-syscfg", "syscon"; + reg = <0x9280000 0x1000>; + }; + + syscfg_rear: rear-syscfg@9290000 { + compatible = "st,stih407-rear-syscfg", "syscon"; + reg = <0x9290000 0x1000>; + }; + + syscfg_flash: flash-syscfg@92a0000 { + compatible = "st,stih407-flash-syscfg", "syscon"; + reg = <0x92a0000 0x1000>; + }; + + syscfg_sbc_reg: fvdp-lite-syscfg@9600000 { + compatible = "st,stih407-sbc-reg-syscfg", "syscon"; + reg = <0x9600000 0x1000>; + }; + + syscfg_core: core-syscfg@92b0000 { + compatible = "st,stih407-core-syscfg", "syscon"; + reg = <0x92b0000 0x1000>; + }; + + syscfg_lpm: lpm-syscfg@94b5100 { + compatible = "st,stih407-lpm-syscfg", "syscon"; + reg = <0x94b5100 0x1000>; + }; + + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial0>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + + status = "disabled"; + }; + + serial@9831000 { + compatible = "st,asc"; + reg = <0x9831000 0x2c>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial1>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + + status = "disabled"; + }; + + serial@9832000 { + compatible = "st,asc"; + reg = <0x9832000 0x2c>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + + status = "disabled"; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0: serial@9530000 { + compatible = "st,asc"; + reg = <0x9530000 0x2c>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial0>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + serial@9531000 { + compatible = "st,asc"; + reg = <0x9531000 0x2c>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial1>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + i2c@9840000 { + compatible = "st,comms-ssc4-i2c"; + interrupts = ; + reg = <0x9840000 0x110>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@9841000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9841000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@9842000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9842000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + + status = "disabled"; + }; + + i2c@9843000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9843000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + + status = "disabled"; + }; + + i2c@9844000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9844000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + + status = "disabled"; + }; + + i2c@9845000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9845000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + + status = "disabled"; + }; + + + /* SSCs on SBC */ + i2c@9540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9540000 0x110>; + interrupts = ; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + + status = "disabled"; + }; + + i2c@9541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9541000 0x110>; + interrupts = ; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi deleted file mode 100644 index 50637f5168d4..000000000000 --- a/arch/arm/boot/dts/stih407.dtsi +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics Limited. - * Author: Giuseppe Cavallaro - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "stih407-clock.dtsi" -#include "stih407-pinctrl.dtsi" -#include -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - - intc: interrupt-controller@08761000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x08761000 0x1000>, <0x08760100 0x100>; - }; - - scu@08760000 { - compatible = "arm,cortex-a9-scu"; - reg = <0x08760000 0x1000>; - }; - - timer@08760200 { - interrupt-parent = <&intc>; - compatible = "arm,cortex-a9-global-timer"; - reg = <0x08760200 0x100>; - interrupts = ; - clocks = <&arm_periph_clk>; - }; - - l2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0x08762000 0x1000>; - arm,data-latency = <3 3 3>; - arm,tag-latency = <2 2 2>; - cache-unified; - cache-level = <2>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - ranges; - compatible = "simple-bus"; - - powerdown: powerdown-controller { - compatible = "st,stih407-powerdown"; - #reset-cells = <1>; - }; - - softreset: softreset-controller { - compatible = "st,stih407-softreset"; - #reset-cells = <1>; - }; - - picophyreset: picophyreset-controller { - compatible = "st,stih407-picophyreset"; - #reset-cells = <1>; - }; - - syscfg_sbc: sbc-syscfg@9620000 { - compatible = "st,stih407-sbc-syscfg", "syscon"; - reg = <0x9620000 0x1000>; - }; - - syscfg_front: front-syscfg@9280000 { - compatible = "st,stih407-front-syscfg", "syscon"; - reg = <0x9280000 0x1000>; - }; - - syscfg_rear: rear-syscfg@9290000 { - compatible = "st,stih407-rear-syscfg", "syscon"; - reg = <0x9290000 0x1000>; - }; - - syscfg_flash: flash-syscfg@92a0000 { - compatible = "st,stih407-flash-syscfg", "syscon"; - reg = <0x92a0000 0x1000>; - }; - - syscfg_sbc_reg: fvdp-lite-syscfg@9600000 { - compatible = "st,stih407-sbc-reg-syscfg", "syscon"; - reg = <0x9600000 0x1000>; - }; - - syscfg_core: core-syscfg@92b0000 { - compatible = "st,stih407-core-syscfg", "syscon"; - reg = <0x92b0000 0x1000>; - }; - - syscfg_lpm: lpm-syscfg@94b5100 { - compatible = "st,stih407-lpm-syscfg", "syscon"; - reg = <0x94b5100 0x1000>; - }; - - serial@9830000 { - compatible = "st,asc"; - reg = <0x9830000 0x2c>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial0>; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - - status = "disabled"; - }; - - serial@9831000 { - compatible = "st,asc"; - reg = <0x9831000 0x2c>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial1>; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - - status = "disabled"; - }; - - serial@9832000 { - compatible = "st,asc"; - reg = <0x9832000 0x2c>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2>; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - - status = "disabled"; - }; - - /* SBC_ASC0 - UART10 */ - sbc_serial0: serial@9530000 { - compatible = "st,asc"; - reg = <0x9530000 0x2c>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_serial0>; - clocks = <&clk_sysin>; - - status = "disabled"; - }; - - serial@9531000 { - compatible = "st,asc"; - reg = <0x9531000 0x2c>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&clk_sysin>; - - status = "disabled"; - }; - - i2c@9840000 { - compatible = "st,comms-ssc4-i2c"; - interrupts = ; - reg = <0x9840000 0x110>; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0_default>; - - status = "disabled"; - }; - - i2c@9841000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0x9841000 0x110>; - interrupts = ; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_default>; - - status = "disabled"; - }; - - i2c@9842000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0x9842000 0x110>; - interrupts = ; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_default>; - - status = "disabled"; - }; - - i2c@9843000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0x9843000 0x110>; - interrupts = ; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_default>; - - status = "disabled"; - }; - - i2c@9844000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0x9844000 0x110>; - interrupts = ; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4_default>; - - status = "disabled"; - }; - - i2c@9845000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0x9845000 0x110>; - interrupts = ; - clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c5_default>; - - status = "disabled"; - }; - - - /* SSCs on SBC */ - i2c@9540000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0x9540000 0x110>; - interrupts = ; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c10_default>; - - status = "disabled"; - }; - - i2c@9541000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0x9541000 0x110>; - interrupts = ; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c11_default>; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi new file mode 100644 index 000000000000..0074bd49797c --- /dev/null +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Giuseppe Cavallaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <2>; + label = "Front Panel LED"; + gpios = <&pio4 1 0>; + linux,default-trigger = "heartbeat"; + }; + green { + #gpio-cells = <2>; + gpios = <&pio1 3 0>; + default-state = "off"; + }; + }; + + i2c@9842000 { + status = "okay"; + }; + + i2c@9843000 { + status = "okay"; + }; + + i2c@9844000 { + status = "okay"; + }; + + i2c@9845000 { + status = "okay"; + }; + + i2c@9540000 { + status = "okay"; + }; + + /* SSC11 to HDMI */ + i2c@9541000 { + status = "okay"; + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; + }; +}; -- cgit v1.2.3 From b16b77a5c1fdfbb135352b5cb6a5c77af2605535 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:48:00 +0100 Subject: ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support. The STiH410 is an advanced multi-HD AVC processor with 3D graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU part of the stih407 family. It has wide connectivity including USB 3.0, PCI-e, SATA and gigabit ethernet. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/stih410-b2120.dts | 29 +++ arch/arm/boot/dts/stih410-clock.dtsi | 338 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/stih410.dtsi | 14 ++ 4 files changed, 382 insertions(+) create mode 100644 arch/arm/boot/dts/stih410-b2120.dts create mode 100644 arch/arm/boot/dts/stih410-clock.dtsi create mode 100644 arch/arm/boot/dts/stih410.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..04cf4a4472d8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -409,6 +409,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ + stih410-b2120.dtb \ stih415-b2000.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts new file mode 100644 index 000000000000..972c17ad8313 --- /dev/null +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Peter Griffin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih410.dtsi" +#include "stihxxx-b2120.dtsi" +/ { + model = "STiH410 B2120"; + compatible = "st,stih410-b2120", "st,stih410"; + + chosen { + bootargs = "console=ttyAS0,115200"; + linux,stdout-path = &sbc_serial0; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + aliases { + ttyAS0 = &sbc_serial0; + }; +}; diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi new file mode 100644 index 000000000000..6b5803a30096 --- /dev/null +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -0,0 +1,338 @@ +/* + * Copyright (C) 2014 STMicroelectronics R&D Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "st,stih410-clk", "simple-bus"; + + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * A9 PLL. + */ + clockgen-a9@92b0000 { + compatible = "st,clkgen-c32"; + reg = <0x92b0000 0xffff>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks. + */ + clk_m_a9: clk-m-a9@92b0000 { + #clock-cells = <0>; + compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0x92b0000 0x10000>; + + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_s_c0_flexgen 13>, + <&clk_m_a9_ext2f_div2>; + }; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + clk_ext2f_a9: clockgen-c0@13 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "clk-s-icn-reg-0"; + }; + + clockgen-a@090ff000 { + compatible = "st,clkgen-c32"; + reg = <0x90ff000 0x1000>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll-ofd-0"; + }; + + clk_s_a0_flexgen: clk-s-a0-flexgen { + compatible = "st,flexgen"; + + #clock-cells = <1>; + + clocks = <&clk_s_a0_pll 0>, + <&clk_sysin>; + + clock-output-names = "clk-ic-lmi0", + "clk-ic-lmi1"; + }; + }; + + clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-C", "st,quadfs"; + reg = <0x9103000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-fs0-ch0", + "clk-s-c0-fs0-ch1", + "clk-s-c0-fs0-ch2", + "clk-s-c0-fs0-ch3"; + }; + + clk_s_c0: clockgen-c@09103000 { + compatible = "st,clkgen-c32"; + reg = <0x9103000 0x1000>; + + clk_s_c0_pll0: clk-s-c0-pll0 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll0-odf-0"; + }; + + clk_s_c0_pll1: clk-s-c0-pll1 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll1-odf-0"; + }; + + clk_s_c0_flexgen: clk-s-c0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_c0_pll0 0>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_quadfs 0>, + <&clk_s_c0_quadfs 1>, + <&clk_s_c0_quadfs 2>, + <&clk_s_c0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-icn-gpu", + "clk-fdma", + "clk-nand", + "clk-hva", + "clk-proc-stfe", + "clk-proc-tp", + "clk-rx-icn-dmu", + "clk-rx-icn-hva", + "clk-icn-cpu", + "clk-tx-icn-dmu", + "clk-mmc-0", + "clk-mmc-1", + "clk-jpegdec", + "clk-ext2fa9", + "clk-ic-bdisp-0", + "clk-ic-bdisp-1", + "clk-pp-dmu", + "clk-vid-dmu", + "clk-dss-lpc", + "clk-st231-aud-0", + "clk-st231-gp-1", + "clk-st231-dmu", + "clk-icn-lmi", + "clk-tx-icn-disp-1", + "clk-icn-sbc", + "clk-stfe-frc2", + "clk-eth-phy", + "clk-eth-ref-phyclk", + "clk-flash-promip", + "clk-main-disp", + "clk-aux-disp", + "clk-compo-dvp", + "clk-tx-icn-hades", + "clk-rx-icn-hades", + "clk-icn-reg-16", + "clk-pp-hades", + "clk-clust-hades", + "clk-hwpe-hades", + "clk-fc-hades"; + }; + }; + + clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9104000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d0-fs0-ch0", + "clk-s-d0-fs0-ch1", + "clk-s-d0-fs0-ch2", + "clk-s-d0-fs0-ch3"; + }; + + clockgen-d0@09104000 { + compatible = "st,clkgen-c32"; + reg = <0x9104000 0x1000>; + + clk_s_d0_flexgen: clk-s-d0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d0_quadfs 0>, + <&clk_s_d0_quadfs 1>, + <&clk_s_d0_quadfs 2>, + <&clk_s_d0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-pcm-0", + "clk-pcm-1", + "clk-pcm-2", + "clk-spdiff", + "clk-pcmr10-master", + "clk-usb2-phy"; + }; + }; + + clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9106000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d2-fs0-ch0", + "clk-s-d2-fs0-ch1", + "clk-s-d2-fs0-ch2", + "clk-s-d2-fs0-ch3"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + clockgen-d2@x9106000 { + compatible = "st,clkgen-c32"; + reg = <0x9106000 0x1000>; + + clk_s_d2_flexgen: clk-s-d2-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>, + <&clk_s_d2_quadfs 2>, + <&clk_s_d2_quadfs 3>, + <&clk_sysin>, + <&clk_sysin>, + <&clk_tmdsout_hdmi>; + + clock-output-names = "clk-pix-main-disp", + "clk-pix-pip", + "clk-pix-gdp1", + "clk-pix-gdp2", + "clk-pix-gdp3", + "clk-pix-gdp4", + "clk-pix-aux-disp", + "clk-denc", + "clk-pix-hddac", + "clk-hddac", + "clk-sddac", + "clk-pix-dvo", + "clk-dvo", + "clk-pix-hdmi", + "clk-tmds-hdmi", + "clk-ref-hdmiphy"; + }; + }; + + clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9107000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d3-fs0-ch0", + "clk-s-d3-fs0-ch1", + "clk-s-d3-fs0-ch2", + "clk-s-d3-fs0-ch3"; + }; + + clockgen-d3@9107000 { + compatible = "st,clkgen-c32"; + reg = <0x9107000 0x1000>; + + clk_s_d3_flexgen: clk-s-d3-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d3_quadfs 0>, + <&clk_s_d3_quadfs 1>, + <&clk_s_d3_quadfs 2>, + <&clk_s_d3_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-stfe-frc1", + "clk-tsout-0", + "clk-tsout-1", + "clk-mchi", + "clk-vsens-compo", + "clk-frc1-remote", + "clk-lpc-0", + "clk-lpc-1"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi new file mode 100644 index 000000000000..c05627eb717d --- /dev/null +++ b/arch/arm/boot/dts/stih410.dtsi @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Peter Griffin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih410-clock.dtsi" +#include "stih407-family.dtsi" +#include "stih410-pinctrl.dtsi" +/ { + +}; -- cgit v1.2.3 From f6b1e68a29ca5471d0f89dce019040e5b021470f Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:48:00 +0100 Subject: ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs At the moment we don't take a reference on some core interconnect clocks which means when CCF turns off unused clocks the SoC will hang. As a temp soltuion we will boot with clk_ignore_unused parameter for all b2120 boards. Signed-off-by: Peter Griffin Acked-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-b2120.dts | 2 +- arch/arm/boot/dts/stih410-b2120.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index a3ad52b8de1c..261d5e2c48d2 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -15,7 +15,7 @@ compatible = "st,stih407-b2120", "st,stih407"; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &sbc_serial0; }; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 972c17ad8313..2f61a9960dee 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -14,7 +14,7 @@ compatible = "st,stih410-b2120", "st,stih410"; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &sbc_serial0; }; -- cgit v1.2.3 From 3ece2c2be34f2fe6254b49dffa5815e2fc7f1b71 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 17 Nov 2014 17:48:00 +0100 Subject: ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000 Following Arnds review comments, update the miphy365 to follow the common convention of naming the phy node names as phy@addr. Signed-off-by: Peter Griffin Suggested-by: Arnd Bergmann Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih416-b2020.dts | 2 +- arch/arm/boot/dts/stih416-b2020e.dts | 2 +- arch/arm/boot/dts/stih416.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 5d1543babf56..200a81844765 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -20,7 +20,7 @@ non-removable; }; - miphy365x_phy: miphy365x@fe382000 { + miphy365x_phy: phy@fe382000 { phy_port0: port@fe382000 { st,sata-gen = <3>; }; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index 956fab8b8ffe..961799e1dc51 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -38,7 +38,7 @@ non-removable; }; - miphy365x_phy: miphy365x@fe382000 { + miphy365x_phy: phy@fe382000 { phy_port0: port@fe382000 { st,sata-gen = <3>; }; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 2bdda522c4f0..fad9073ddeed 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -281,7 +281,7 @@ clocks = <&clk_s_a1_ls 8>; }; - miphy365x_phy: miphy365x@fe382000 { + miphy365x_phy: phy@fe382000 { compatible = "st,miphy365x-phy"; st,syscfg = <&syscfg_rear>; #address-cells = <1>; -- cgit v1.2.3 From bcecf1ea3982796e34eb0666bcb15a5fd39db5dd Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Fri, 14 Nov 2014 16:54:22 +0100 Subject: DTS: meson: Add forgotten compatible in board DTS The board DTS is missing the machine compatible. Signed-off-by: Carlo Caione --- arch/arm/boot/dts/meson6-atv1200.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index dc2541faf1ec..d7d351a68944 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -50,7 +50,7 @@ / { model = "Geniatech ATV1200"; - compatible = "geniatech,atv1200"; + compatible = "geniatech,atv1200", "amlogic,meson6"; aliases { serial0 = &uart_AO; -- cgit v1.2.3 From aeff05a39a5a9b9a41fe96ef4f4246cef5fb2f4a Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Sun, 5 Oct 2014 23:59:14 +0200 Subject: ARM: dts: add dtsi for Amlogic Meson8 SoCs This adds a dtsi for Amlogic Meson8 SoCs. It differs from the Meson6 dtsi for the number of Cortex-A9 cores (4 vs 2) and for the frequency of clk81. Signed-off-by: Beniamino Galvani Acked-by: Arnd Bergmann Signed-off-by: Carlo Caione --- arch/arm/boot/dts/meson8.dtsi | 88 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 arch/arm/boot/dts/meson8.dtsi diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi new file mode 100644 index 000000000000..42e4026c7ac1 --- /dev/null +++ b/arch/arm/boot/dts/meson8.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright 2014 Carlo Caione + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "meson.dtsi" + +/ { + model = "Amlogic Meson8 SoC"; + compatible = "amlogic,meson8"; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x201>; + }; + + cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x202>; + }; + + cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x203>; + }; + }; + + clk81: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <141666666>; + }; +}; /* end of / */ -- cgit v1.2.3 From 550ab390d7c60b85cd896cf03a34f8eae8a65d69 Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Tue, 18 Nov 2014 15:30:35 +0100 Subject: ARM: meson: DTS: enable L2 cache This enables the L2 cache controller available in Amlogic SoCs. Signed-off-by: Beniamino Galvani Acked-by: Arnd Bergmann Signed-off-by: Carlo Caione --- arch/arm/boot/dts/meson.dtsi | 7 +++++++ arch/arm/boot/dts/meson6.dtsi | 2 ++ arch/arm/boot/dts/meson8.dtsi | 4 ++++ 3 files changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index e6539ea5a711..862aae4a3285 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -50,6 +50,13 @@ / { interrupt-parent = <&gic>; + L2: l2-cache-controller@c4200000 { + compatible = "arm,pl310-cache"; + reg = <0xc4200000 0x1000>; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@c4301000 { compatible = "arm,cortex-a9-gic"; reg = <0xc4301000 0x1000>, diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 4ba49127779f..8b33be15af94 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -60,12 +60,14 @@ cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; reg = <0x200>; }; cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; reg = <0x201>; }; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 42e4026c7ac1..1f442a7fe03b 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -58,24 +58,28 @@ cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; reg = <0x200>; }; cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; reg = <0x201>; }; cpu@202 { device_type = "cpu"; compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; reg = <0x202>; }; cpu@203 { device_type = "cpu"; compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; reg = <0x203>; }; }; -- cgit v1.2.3 From 8fba96fac1c48b242ff2b202332572b6eeef95cc Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Thu, 13 Nov 2014 20:32:03 +0100 Subject: ARM: dts: meson: add I2C controller nodes Add nodes for I2C controllers A,B,AO, which are available in both Meson6 and Meson8. Signed-off-by: Beniamino Galvani Signed-off-by: Carlo Caione --- arch/arm/boot/dts/meson.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 862aae4a3285..03bcff87bd27 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -113,5 +113,35 @@ clocks = <&clk81>; status = "disabled"; }; + + i2c_AO: i2c@c8100500 { + compatible = "amlogic,meson6-i2c"; + reg = <0xc8100500 0x20>; + interrupts = <0 92 1>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_A: i2c@c1108500 { + compatible = "amlogic,meson6-i2c"; + reg = <0xc1108500 0x20>; + interrupts = <0 21 1>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_B: i2c@c11087c0 { + compatible = "amlogic,meson6-i2c"; + reg = <0xc11087c0 0x20>; + interrupts = <0 128 1>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; /* end of / */ -- cgit v1.2.3 From c539711ee79f997b0cdc136382167963932461b8 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Mon, 17 Nov 2014 14:35:44 +0100 Subject: ARM: dts: berlin: add BG2Q nodes for USB support Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q SoC has 3 USB host controller, compatible with ChipIdea. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index a35deb37ffb5..35253c947a7c 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -114,6 +114,40 @@ #interrupt-cells = <3>; }; + usb_phy2: phy@a2f400 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xa2f400 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 14>; + status = "disabled"; + }; + + usb2: usb@a30000 { + compatible = "chipidea,usb2"; + reg = <0xa30000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB2>; + phys = <&usb_phy2>; + phy-names = "usb-phy"; + status = "disabled"; + }; + + usb_phy0: phy@b74000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xb74000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 12>; + status = "disabled"; + }; + + usb_phy1: phy@b78000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xb78000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 13>; + status = "disabled"; + }; + eth0: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; @@ -404,6 +438,26 @@ }; }; + usb0: usb@ed0000 { + compatible = "chipidea,usb2"; + reg = <0xed0000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + status = "disabled"; + }; + + usb1: usb@ee0000 { + compatible = "chipidea,usb2"; + reg = <0xee0000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB1>; + phys = <&usb_phy1>; + phy-names = "usb-phy"; + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From fe354939edffe1f2579b4b372bad44e72bd9a9b3 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Mon, 17 Nov 2014 14:35:45 +0100 Subject: ARM: dts: Berlin: enable USB on the BG2Q DMP Enable the 2 available USB PHY and USB nodes on the Marvell Berlin BG2Q DMP. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 ++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index a403b0a5ba91..28e7e2060c33 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -7,6 +7,8 @@ */ /dts-v1/; + +#include #include "berlin2q.dtsi" / { @@ -21,6 +23,39 @@ choosen { bootargs = "console=ttyS0,115200 earlyprintk"; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb0_vbus: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&portb 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb1_vbus: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&portb 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb2_vbus: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&portb 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; }; &sdhci1 { @@ -46,6 +81,24 @@ status = "okay"; }; +&usb_phy0 { + status = "okay"; +}; + +&usb_phy2 { + status = "okay"; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb2 { + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + ð0 { status = "okay"; }; -- cgit v1.2.3 From e802b3a2bfd4f52a9b23037800fa0965aae92013 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 17 Nov 2014 14:35:46 +0100 Subject: ARM: dts: berlin: add BG2CD nodes for USB support Adds nodes describing the Marvell Berlin BG2CD USB PHY and USB. The BG2CD SoC has 2 USB ChipIdea controllers, with usb0 host-only and usb1 dual-role capable. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 9e338ff80fd3..230df3b1770e 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -75,6 +75,22 @@ clocks = <&chip CLKID_TWD>; }; + usb_phy0: usb-phy@b74000 { + compatible = "marvell,berlin2cd-usb-phy"; + reg = <0xb74000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x178 23>; + status = "disabled"; + }; + + usb_phy1: usb-phy@b78000 { + compatible = "marvell,berlin2cd-usb-phy"; + reg = <0xb78000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x178 24>; + status = "disabled"; + }; + eth1: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; @@ -287,6 +303,26 @@ }; }; + usb0: usb@ed0000 { + compatible = "chipidea,usb2"; + reg = <0xed0000 0x200>; + interrupts = ; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + status = "disabled"; + }; + + usb1: usb@ee0000 { + compatible = "chipidea,usb2"; + reg = <0xee0000 0x200>; + interrupts = ; + clocks = <&chip CLKID_USB1>; + phys = <&usb_phy1>; + phy-names = "usb-phy"; + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From ea7aaa26273431650cb94e712c7c7cfec4306587 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 17 Nov 2014 14:35:47 +0100 Subject: ARM: dts: berlin: enable USB on the Google Chromecast Enable usb1 on Google Chromecast which is connected to micro-USB plug used for external power supply, too. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index bdcaff7c321e..30270be4d0c9 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -53,3 +53,7 @@ }; &uart0 { status = "okay"; }; + +&usb_phy1 { status = "okay"; }; + +&usb1 { status = "okay"; }; -- cgit v1.2.3 From 177d8bea33899cef3989a2d0b4ea7213b5f34d0a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:47:46 -0800 Subject: ARM: shmobile: lager: fixup IIC2 clock frequency Current Lager IIC2 is using default clock frequency, but, ak4643 audio codec chip needs 100kHz This patch clarifies IIC2 clock frequency as 100kHz. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 830f2e87df49..86fb2ee29782 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -429,6 +429,8 @@ pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; + clock-frequency = <100000>; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; -- cgit v1.2.3 From 8ea7a44a98d6c992ffc0013f7a83d9829121292d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:47:56 -0800 Subject: ARM: shmobile: lager: Sound PIO support on DTS Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 70 +++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 86fb2ee29782..c2b4f65b904e 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -9,6 +9,18 @@ * kind, whether express or implied. */ +/* + * SSI-AK4643 + * + * SW1: 1: AK4643 + * 2: CN22 + * 3: ADV7511 + * + * This command is required when Playback/Capture + * + * amixer set "LINEOUT Mixer DACL" on + */ + /dts-v1/; #include "r8a7790.dtsi" #include @@ -146,6 +158,23 @@ 1800000 0>; }; + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; + }; + vga-encoder { compatible = "adi,adv7123"; @@ -292,6 +321,16 @@ renesas,groups = "vin1_data8", "vin1_clk"; renesas,function = "vin1"; }; + + sound_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + sound_clk_pins: sound_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; ðer { @@ -431,6 +470,12 @@ clock-frequency = <100000>; + ak4643: sound-codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; @@ -513,3 +558,28 @@ }; }; }; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + #sound-dai-cells = <0>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>; + capture = <&ssi1>; + }; + }; +}; + +&ssi0 { + pio-transfer; +}; + +&ssi1 { + pio-transfer; + shared-pin; +}; -- cgit v1.2.3 From 67e8877d52e73e4cc73ebc84c41c73717d391da0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:48:06 -0800 Subject: ARM: shmobile: lager: Sound DMA support on DTS DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index c2b4f65b904e..93630d088889 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -576,10 +576,10 @@ }; &ssi0 { - pio-transfer; + no-busif; }; &ssi1 { - pio-transfer; + no-busif; shared-pin; }; -- cgit v1.2.3 From 1d42e9041cf09c585f4f3844dbc68ec7c2bbe9f6 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:48:16 -0800 Subject: ARM: shmobile: lager: Sound DMA support via BUSIF on DTS DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 93630d088889..0634fffaacd2 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -575,11 +575,6 @@ }; }; -&ssi0 { - no-busif; -}; - &ssi1 { - no-busif; shared-pin; }; -- cgit v1.2.3 From 7e78eb69a1cd79dfde9fef5256333cddb98b8f7a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:48:27 -0800 Subject: ARM: shmobile: lager: Sound DMA support via SRC on DTS DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 0634fffaacd2..a249270a789f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -569,8 +569,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi0>; - capture = <&ssi1>; + playback = <&ssi0 &src2>; + capture = <&ssi1 &src3>; }; }; }; -- cgit v1.2.3 From e110c54107d9095c507645f8d95ec85ca250bc37 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:48:38 -0800 Subject: ARM: shmobile: lager: Sound DMA support via DVC on DTS DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index a249270a789f..2f91740505fd 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -19,6 +19,13 @@ * This command is required when Playback/Capture * * amixer set "LINEOUT Mixer DACL" on + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on */ /dts-v1/; @@ -569,8 +576,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi0 &src2>; - capture = <&ssi1 &src3>; + playback = <&ssi0 &src2 &dvc0>; + capture = <&ssi1 &src3 &dvc1>; }; }; }; -- cgit v1.2.3 From a8d943ed902bdbef05b64b7ad7ed8878a967a286 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:48:49 -0800 Subject: ARM: shmobile: koelsch: fixup I2C2 clock frequency Current Koelsch I2C2 has 400kHz settings, but, ak4643 audio codec chip which is connected to I2C2 can't work such frequency. Fixup I2C2 clock frequency to 100kHz. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 191f32bc43ea..59e4251dc1af 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -425,7 +425,7 @@ pinctrl-names = "default"; status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; composite-in@20 { compatible = "adi,adv7180"; -- cgit v1.2.3 From b160f61516b9b93325b8bf0028ce53cbea8225d1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:49:00 -0800 Subject: ARM: shmobile: koelsch: Sound PIO support on DTS Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 70 +++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 59e4251dc1af..c92d0d713258 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -10,6 +10,18 @@ * kind, whether express or implied. */ +/* + * SSI-AK4643 + * + * SW1: 1: AK4643 + * 2: CN22 + * 3: ADV7511 + * + * This command is required when Playback/Capture + * + * amixer set "LINEOUT Mixer DACL" on + */ + /dts-v1/; #include "r8a7791.dtsi" #include @@ -210,6 +222,23 @@ states = <3300000 1 1800000 0>; }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; + }; }; &du { @@ -300,6 +329,16 @@ renesas,groups = "vin1_data8", "vin1_clk"; renesas,function = "vin1"; }; + + sound_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + sound_clk_pins: sound_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; ðer { @@ -427,6 +466,12 @@ status = "okay"; clock-frequency = <100000>; + ak4643: sound-codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; @@ -513,3 +558,28 @@ }; }; }; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + #sound-dai-cells = <0>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>; + capture = <&ssi1>; + }; + }; +}; + +&ssi0 { + pio-transfer; +}; + +&ssi1 { + pio-transfer; + shared-pin; +}; -- cgit v1.2.3 From 54153c26d206b9168a37704ca8b17f986f047d70 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:49:12 -0800 Subject: ARM: shmobile: koelsch: Sound DMA support on DTS DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index c92d0d713258..68628cf3fda1 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -576,10 +576,10 @@ }; &ssi0 { - pio-transfer; + no-busif; }; &ssi1 { - pio-transfer; + no-busif; shared-pin; }; -- cgit v1.2.3 From e975bb333e670f548986478eb24e498b95eb3e85 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:49:22 -0800 Subject: ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 68628cf3fda1..5bc675fd04cc 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -575,11 +575,6 @@ }; }; -&ssi0 { - no-busif; -}; - &ssi1 { - no-busif; shared-pin; }; -- cgit v1.2.3 From 664de6feea5978b9518a0bc4f8185e1f607be344 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:49:33 -0800 Subject: ARM: shmobile: koelsch: Sound DMA support via SRC on DTS DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 5bc675fd04cc..d2fe67747e0a 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -569,8 +569,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi0>; - capture = <&ssi1>; + playback = <&ssi0 &src2>; + capture = <&ssi1 &src3>; }; }; }; -- cgit v1.2.3 From 5c6d4b947aeca23e10f7d4ddf2041eda51b0ded2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 3 Nov 2014 17:49:45 -0800 Subject: ARM: shmobile: koelsch: Sound DMA support via DVC on DTS DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index d2fe67747e0a..f056e64e50c1 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -20,6 +20,13 @@ * This command is required when Playback/Capture * * amixer set "LINEOUT Mixer DACL" on + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on */ /dts-v1/; @@ -569,8 +576,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi0 &src2>; - capture = <&ssi1 &src3>; + playback = <&ssi0 &src2 &dvc0>; + capture = <&ssi1 &src3 &dvc1>; }; }; }; -- cgit v1.2.3 From 7e9ad4d09d31ac696aa9baf4ff5c06cc015f7528 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 6 Nov 2014 12:52:10 +0100 Subject: ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties The IIC nodes used the generic compatible properties only. This may cause the driver to fail when using Standard Speed on IIC masters where the operational clock is driven by the 130 MHz HP clock. Add the SoC-specific compatible property to fix this. Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index b5ead845c6c3..01373ee3fe29 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -106,7 +106,7 @@ i2c5: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; @@ -205,7 +205,7 @@ i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -214,7 +214,7 @@ i2c1: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -223,7 +223,7 @@ i2c2: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -232,7 +232,7 @@ i2c3: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -241,7 +241,7 @@ i2c4: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -250,7 +250,7 @@ i2c6: i2c@e6550000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -259,7 +259,7 @@ i2c7: i2c@e6560000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -268,7 +268,7 @@ i2c8: i2c@e6570000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; -- cgit v1.2.3 From dd4dc874d16b87944e6803f41dc9477c3c6f09d6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 6 Nov 2014 12:52:09 +0100 Subject: ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties The IIC nodes used the generic compatible properties only. This causes the driver to fail when using Standard Speed, as the operational clock is driven by the 104 MHz HP clock: i2c-sh_mobile e6820000.i2c: timing values out of range: L/H=0x208/0x1bf i2c-sh_mobile: probe of e6820000.i2c failed with error -22 Add the SoC-specific compatible property to fix this. Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 030a5920312f..d8def5a529da 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -138,7 +138,7 @@ i2c0: i2c@e6820000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH 0 168 IRQ_TYPE_LEVEL_HIGH @@ -150,7 +150,7 @@ i2c1: i2c@e6822000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH 0 52 IRQ_TYPE_LEVEL_HIGH @@ -162,7 +162,7 @@ i2c2: i2c@e6824000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH 0 172 IRQ_TYPE_LEVEL_HIGH @@ -174,7 +174,7 @@ i2c3: i2c@e6826000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH 0 184 IRQ_TYPE_LEVEL_HIGH @@ -186,7 +186,7 @@ i2c4: i2c@e6828000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH 0 188 IRQ_TYPE_LEVEL_HIGH -- cgit v1.2.3 From 352faa5fedbc9f84faa849ce612ab2633c4db0ec Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 6 Nov 2014 13:49:58 +0100 Subject: ARM: shmobile: koelsch dts: Add labels for the LEDs The LEDs on the koelsch board are labeled using upper-case characters. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f056e64e50c1..a10f534ecec7 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -149,12 +149,15 @@ compatible = "gpio-leds"; led6 { gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + label = "LED6"; }; led7 { gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + label = "LED7"; }; led8 { gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + label = "LED8"; }; }; -- cgit v1.2.3 From 8ee63b3a9fcad86d7485b03bbea5bc5d2d072568 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 6 Nov 2014 13:49:59 +0100 Subject: ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs The LEDs on the kzm9g board are labeled using upper-case characters. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 0dac0e66ccad..e59e674f313b 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -101,15 +101,19 @@ compatible = "gpio-leds"; led1 { gpios = <&pfc 20 GPIO_ACTIVE_LOW>; + label = "LED1"; }; led2 { gpios = <&pfc 21 GPIO_ACTIVE_LOW>; + label = "LED2"; }; led3 { gpios = <&pfc 22 GPIO_ACTIVE_LOW>; + label = "LED3"; }; led4 { gpios = <&pfc 23 GPIO_ACTIVE_LOW>; + label = "LED4"; }; }; -- cgit v1.2.3 From 0d73ca41e8bb3b06c6c1a3a9a5d2aba908929d44 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 7 Nov 2014 11:11:43 +0100 Subject: ARM: shmobile: r8a7790: add DMA nodes for IIC Signed-off-by: Wolfram Sang Acked-by: Laurent Pinchart Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 146f91835d8b..3afd071b3001 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -423,6 +423,8 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -433,6 +435,8 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -443,6 +447,8 @@ reg = <0 0xe6520000 0 0x425>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; + dmas = <&dmac0 0x69>, <&dmac0 0x6a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -453,6 +459,8 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>; + dma-names = "tx", "rx"; status = "disabled"; }; -- cgit v1.2.3 From 3f58c54bd027b42099d59e5ea0521f7b39d82e15 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 7 Nov 2014 11:11:44 +0100 Subject: ARM: shmobile: r8a7791: add DMA nodes for IIC Signed-off-by: Wolfram Sang Acked-by: Laurent Pinchart Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 379e1a505e33..cfea2eca25b6 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -434,6 +434,8 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -444,6 +446,8 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -454,6 +458,8 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>; + dma-names = "tx", "rx"; status = "disabled"; }; -- cgit v1.2.3 From bd2e4a62ef68b3c5a8542026533bd87c631c544d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 11 Nov 2014 04:36:47 +0000 Subject: ARM: shmobile: lager: add Volume Ramp usage on comment Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 2f91740505fd..a2351587dfe4 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -26,6 +26,15 @@ * * amixer set "DVC Out Mute" on * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up */ /dts-v1/; -- cgit v1.2.3 From ce47481652106e955296651a1b76c0dd4561cfbc Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 11 Nov 2014 04:37:05 +0000 Subject: ARM: shmobile: koelsch: add Volume Ramp usage on comment Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index a10f534ecec7..487fc99a2fa3 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -27,6 +27,15 @@ * * amixer set "DVC Out Mute" on * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up */ /dts-v1/; -- cgit v1.2.3 From 3e58a5424c8325df8b62f1de175dc95c7373bfe1 Mon Sep 17 00:00:00 2001 From: Kouei Abe Date: Wed, 12 Nov 2014 17:55:56 +0900 Subject: ARM: shmobile: r8a7794: Add SGX clock to device tree Signed-off-by: Kouei Abe Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 11 +++++------ include/dt-bindings/clock/r8a7794-clock.h | 1 + 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 95f656d22fde..b6f8f451e3b1 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -461,16 +461,15 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, - <&zs_clk>, <&zs_clk>, <&zs_clk>; + clocks = <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 - R8A7794_CLK_CMT0 R8A7794_CLK_TMU0 + R8A7794_CLK_TMU1 R8A7794_CLK_3DG R8A7794_CLK_TMU3 + R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 R8A7794_CLK_TMU0 >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0"; + "tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index fd7cdee6a666..9066213f5a96 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -27,6 +27,7 @@ /* MSTP1 */ #define R8A7794_CLK_TMU1 11 +#define R8A7794_CLK_3DG 12 #define R8A7794_CLK_TMU3 21 #define R8A7794_CLK_TMU2 22 #define R8A7794_CLK_CMT0 24 -- cgit v1.2.3 From dc3cf93d89c525dcaebf4460109196fd9752c706 Mon Sep 17 00:00:00 2001 From: Yoshifumi Hosoya Date: Wed, 12 Nov 2014 17:55:57 +0900 Subject: ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree Signed-off-by: Yoshifumi Hosoya Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 14 +++++++++----- include/dt-bindings/clock/r8a7794-clock.h | 6 ++++++ 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index b6f8f451e3b1..19c9de3f2a5a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -461,15 +461,19 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; + clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, + <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7794_CLK_TMU1 R8A7794_CLK_3DG R8A7794_CLK_TMU3 - R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 R8A7794_CLK_TMU0 + R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1 + R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0 + R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 + R8A7794_CLK_TMU0 R8A7794_CLK_VSP1_DU0 R8A7794_CLK_VSP1_S >; clock-output-names = - "tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0"; + "vcp0", "vpc0", "tmu1", "3dg", "2ddmac", "fdp1-0", + "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du0", "vsps"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index 9066213f5a96..aa9c286e60c0 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -26,12 +26,18 @@ #define R8A7794_CLK_MSIOF0 0 /* MSTP1 */ +#define R8A7794_CLK_VCP0 1 +#define R8A7794_CLK_VPC0 3 #define R8A7794_CLK_TMU1 11 #define R8A7794_CLK_3DG 12 +#define R8A7794_CLK_2DDMAC 15 +#define R8A7794_CLK_FDP1_0 19 #define R8A7794_CLK_TMU3 21 #define R8A7794_CLK_TMU2 22 #define R8A7794_CLK_CMT0 24 #define R8A7794_CLK_TMU0 25 +#define R8A7794_CLK_VSP1_DU0 28 +#define R8A7794_CLK_VSP1_S 31 /* MSTP2 */ #define R8A7794_CLK_SCIFA2 2 -- cgit v1.2.3 From b02ce79fbd5cb822a557e401cfc80d9ce813331e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 17 Nov 2014 18:25:13 +0900 Subject: ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree Signed-off-by: Yoshihiro Shimoda Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 3afd071b3001..64f610f1e899 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1107,17 +1107,20 @@ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; + <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 + R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1 >; clock-output-names = "iic2", "tpu0", "mmcif1", "sdhi3", "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "iic0", "pciec", "iic1", "ssusb", "cmt1"; + "iic0", "pciec", "iic1", "ssusb", "cmt1", + "usbdmac0", "usbdmac1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; -- cgit v1.2.3 From b9473d9f621b68327776b66d4b9a8ba5e0b8b4cb Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 17 Nov 2014 18:25:25 +0900 Subject: ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree Signed-off-by: Yoshihiro Shimoda Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index cfea2eca25b6..a705d352e0f3 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1108,16 +1108,19 @@ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; + <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 + R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1 >; clock-output-names = "tpu0", "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1"; + "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1", + "usbdmac0", "usbdmac1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; -- cgit v1.2.3 From ba2a1d6959acfc387c20eae6480b1c4b3bbc5950 Mon Sep 17 00:00:00 2001 From: Matthias Klein Date: Thu, 20 Nov 2014 10:52:45 +0000 Subject: ARM: bcm2835: Add device tree for Raspberry Pi model B+ The model B and B+ differ in the GPIO lines for ACT and PWR leds, and the I2S interface. Signed-off-by: Matthias Klein Tested-by: Stephen Warren Signed-off-by: Lee Jones Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 30 +++++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi-b.dts | 46 ++-------------------------- arch/arm/boot/dts/bcm2835-rpi.dtsi | 51 ++++++++++++++++++++++++++++++++ 4 files changed, 85 insertions(+), 43 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts create mode 100644 arch/arm/boot/dts/bcm2835-rpi.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2b57568af583..165a6add38b9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm911360_entphn.dtb \ bcm911360k.dtb \ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts new file mode 100644 index 000000000000..e479515099c3 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -0,0 +1,30 @@ +/dts-v1/; +/include/ "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; + model = "Raspberry Pi Model B+"; + + leds { + act { + gpios = <&gpio 47 0>; + }; + + pwr { + label = "PWR"; + gpios = <&gpio 35 0>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <4>; /* alt0 */ + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 58a0d60b95f1..bafa46fc226a 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,63 +1,23 @@ /dts-v1/; -/include/ "bcm2835.dtsi" +/include/ "bcm2835-rpi.dtsi" / { compatible = "raspberrypi,model-b", "brcm,bcm2835"; model = "Raspberry Pi Model B"; - memory { - reg = <0 0x10000000>; - }; - leds { - compatible = "gpio-leds"; - act { - label = "ACT"; gpios = <&gpio 16 1>; - default-state = "keep"; - linux,default-trigger = "heartbeat"; }; }; }; &gpio { - pinctrl-names = "default"; - pinctrl-0 = <&gpioout &alt0 &alt2 &alt3>; - - gpioout: gpioout { - brcm,pins = <6>; - brcm,function = <1>; /* GPIO out */ - }; - - alt0: alt0 { - brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; - brcm,function = <4>; /* alt0 */ - }; - - alt3: alt3 { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <7>; /* alt3 */ - }; + pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; /* I2S interface */ - alt2: alt2 { + i2s_alt2: i2s_alt2 { brcm,pins = <28 29 30 31>; brcm,function = <6>; /* alt2 */ }; }; - -&i2c0 { - status = "okay"; - clock-frequency = <100000>; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <100000>; -}; - -&sdhci { - status = "okay"; - bus-width = <4>; -}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi new file mode 100644 index 000000000000..c7064487017d --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -0,0 +1,51 @@ +/include/ "bcm2835.dtsi" + +/ { + memory { + reg = <0 0x10000000>; + }; + + leds { + compatible = "gpio-leds"; + + act { + label = "ACT"; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&gpio { + pinctrl-names = "default"; + + gpioout: gpioout { + brcm,pins = <6>; + brcm,function = <1>; /* GPIO out */ + }; + + alt0: alt0 { + brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; + brcm,function = <4>; /* alt0 */ + }; + + alt3: alt3 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <7>; /* alt3 */ + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; +}; + +&sdhci { + status = "okay"; + bus-width = <4>; +}; -- cgit v1.2.3 From b2ea3f82e7984d855c5e61fef18746771d90c73c Mon Sep 17 00:00:00 2001 From: Darshana Padmadas Date: Sat, 8 Nov 2014 22:52:05 +0530 Subject: dt-bindings: Document correct and deprecated vendor-prefix with device isl29028 This patch documents the device isl29028 with its vendor-prefix. Undocumented deprecated vendor-prefix found by checkpatch also documented for compatibility reasons. Signed-off-by: Darshana Padmadas Acked-by: Arnd Bergmann Acked-by: Mark Rutland Signed-off-by: Arnd Bergmann --- Documentation/devicetree/bindings/i2c/trivial-devices.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index fbde415078e6..605dcca5dbec 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,6 +56,8 @@ gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire In infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) isl,isl12057 Intersil ISL12057 I2C RTC Chip +isil,isl29028 (deprecated, use isl) +isl,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface -- cgit v1.2.3 From 7c75c1d5e72be6736aa558efd33ca2b31d77e425 Mon Sep 17 00:00:00 2001 From: Darshana Padmadas Date: Sat, 8 Nov 2014 22:52:06 +0530 Subject: dt-bindings: Document deprecated device vendor name to fix related warning This patch documents deprecated vendor name "isil" to fix warning of undocumented string for device isl29028 as reported while running checkpatch.pl on drivers/staging/iio/light/isl29028.c. This is done to maintain compatibility with older kernels. Signed-off-by: Darshana Padmadas Acked-by: Arnd Bergmann Acked-by: Mark Rutland Signed-off-by: Arnd Bergmann --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 723999d73744..bfbd93e06bae 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -77,6 +77,7 @@ innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group isee ISEE 2007 S.L. +isil Intersil (deprecated, use isl) isl Intersil karo Ka-Ro electronics GmbH keymile Keymile GmbH -- cgit v1.2.3 From 2dcb7efa120a8d8f625001d6c7cd78aa38c411a7 Mon Sep 17 00:00:00 2001 From: Darshana Padmadas Date: Sat, 8 Nov 2014 22:52:07 +0530 Subject: Staging: iio: light: Added correct vendor-prefix for device isl29028 This patch adds the correct vendor-prefix for device isl29028 and maintains deprecated vendor-prefix found by checkpatch warning for older kernel releases. Signed-off-by: Darshana Padmadas Acked-by: Arnd Bergmann Acked-by: Mark Rutland Acked-by: Jonathan Cameron Signed-off-by: Arnd Bergmann --- drivers/staging/iio/light/isl29028.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c index 6014625920b0..e969107ddb47 100644 --- a/drivers/staging/iio/light/isl29028.c +++ b/drivers/staging/iio/light/isl29028.c @@ -537,7 +537,8 @@ static const struct i2c_device_id isl29028_id[] = { MODULE_DEVICE_TABLE(i2c, isl29028_id); static const struct of_device_id isl29028_of_match[] = { - { .compatible = "isil,isl29028", }, + { .compatible = "isl,isl29028", }, + { .compatible = "isil,isl29028", },/* deprecated, don't use */ { }, }; MODULE_DEVICE_TABLE(of, isl29028_of_match); -- cgit v1.2.3 From ed200bfb2ed6a2487503d4b83a5c8963b5ad9476 Mon Sep 17 00:00:00 2001 From: Darshana Padmadas Date: Sat, 8 Nov 2014 22:52:08 +0530 Subject: arch: arm: boot: dts: Correct vendor-prefix for iio device isl29028 in compatible property This patch corrects the vendor-prefix for isl29028 in the compatible property from "isil,isl29028" to "isl,isl29028" according to listed vendor-prefixes in Documentation/devicetree/bindings/vendor-prefixes.txt. Incorrect vendor-prefix "isl" was reported by checkpatch.pl warning for drivers/staging/iio/light/isl29028.c. Thus incorrect vendor-prefix "isil" was corrected for every mention of device isl29028. Signed-off-by: Darshana Padmadas Acked-by: Arnd Bergmann Acked-by: Mark Rutland Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 206379546244..dcc6c75553a4 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -187,7 +187,7 @@ /* ALS and Proximity sensor */ isl29028@44 { - compatible = "isil,isl29028"; + compatible = "isl,isl29028"; reg = <0x44>; interrupt-parent = <&gpio>; interrupts = ; -- cgit v1.2.3 From 8b907c8b62acd6120065e1e596a43c669d851a47 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Fri, 26 Sep 2014 11:04:09 -0500 Subject: arm: dts: socfpga: Add OCRAM node Add a 64KB ocram node for SOCFPGA. Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 45fce2cf6fed..6af96edb0372 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -639,6 +639,11 @@ clock-names = "biu", "ciu"; }; + ocram: sram@ffff0000 { + compatible = "mmio-sram"; + reg = <0xffff0000 0x10000>; + }; + /* Local timer */ timer@fffec600 { compatible = "arm,cortex-a9-twd-timer"; -- cgit v1.2.3 From ba6b96b3e915e884003aab7031f11e29c4adb6a0 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Tue, 21 Oct 2014 18:55:40 +0000 Subject: arm: dts: socfpga: Add SPI nodes to SOCFPGA DT. Add 2 SPI nodes to SOCFPGA device tree. Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 6af96edb0372..deb0a0d815a6 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -644,6 +644,28 @@ reg = <0xffff0000 0x10000>; }; + spi0: spi@fff00000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff00000 0x1000>; + interrupts = <0 154 4>; + num-cs = <4>; + clocks = <&spi_m_clk>; + status = "disabled"; + }; + + spi1: spi@fff01000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff01000 0x1000>; + interrupts = <0 156 4>; + num-cs = <4>; + clocks = <&spi_m_clk>; + status = "disabled"; + }; + /* Local timer */ timer@fffec600 { compatible = "arm,cortex-a9-twd-timer"; -- cgit v1.2.3 From c1ad85d77224b91448761a3f0ab0d14459c7bb44 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Fri, 7 Nov 2014 10:19:04 -0600 Subject: arm: dts: socfpga: enable watchdog for socfpga platform Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_cyclone5.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 28c05e7a31c9..06db951e06f8 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -49,3 +49,7 @@ }; }; }; + +&watchdog0 { + status = "okay"; +}; -- cgit v1.2.3 From 475dc86d08de4af61b6e8524bbcdbf8d675cb4fa Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Thu, 4 Sep 2014 16:45:56 -0500 Subject: arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC The Arria 10 is latest SOC+FPGA from the Altera SOCFPGA platform. The Arria10 SOC shares some similarities with the SOCFPGA Cyclone5 and Arria5, but there are enough differences to warrant a new base dtsi. The differences are: * 3 EMAC controllers * 5 I2C controllers * 3 SPI controllers * 1.5 GHZ dual A9s * Support for DDR4 Besides the usual memory map and IRQ changes, the clock framework will be different, so this patch just adds the fixed-clocks. Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/socfpga_arria10.dtsi | 374 ++++++++++++++++++++++++++++ arch/arm/boot/dts/socfpga_arria10_socdk.dts | 48 ++++ 3 files changed, 423 insertions(+) create mode 100644 arch/arm/boot/dts/socfpga_arria10.dtsi create mode 100755 arch/arm/boot/dts/socfpga_arria10_socdk.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..b1905a7c8c1d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -397,6 +397,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r8a7779-marzen.dtb \ r8a7794-alt.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ + socfpga_arria10_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi new file mode 100644 index 000000000000..8a05c47fd57f --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -0,0 +1,374 @@ +/* + * Copyright Altera Corporation (C) 2014. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "skeleton.dtsi" +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + serial0 = &uart0; + serial1 = &uart1; + timer0 = &timer0; + timer1 = &timer1; + timer2 = &timer2; + timer3 = &timer3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + intc: intc@ffffd000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xffffd000 0x1000>, + <0xffffc100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@ffda1000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffda1000 0x1000>; + interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>, + <0 84 IRQ_TYPE_LEVEL_HIGH>, + <0 85 IRQ_TYPE_LEVEL_HIGH>, + <0 86 IRQ_TYPE_LEVEL_HIGH>, + <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>, + <0 89 IRQ_TYPE_LEVEL_HIGH>, + <0 90 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + clkmgr@ffd04000 { + compatible = "altr,clk-mgr"; + reg = <0xffd04000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + main_pll: main_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc1>; + }; + + periph_pll: periph_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc1>; + }; + }; + }; + + gmac0: ethernet@ff800000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + reg = <0xff800000 0x2000>; + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + /* Filled in by bootloader */ + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gmac1: ethernet@ff802000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + reg = <0xff802000 0x2000>; + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + /* Filled in by bootloader */ + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gmac2: ethernet@ff804000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + reg = <0xff804000 0x2000>; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + /* Filled in by bootloader */ + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gpio0: gpio@ffc02900 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc02900 0x100>; + status = "disabled"; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@ffc02a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc02a00 0x100>; + status = "disabled"; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio2: gpio@ffc02b00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc02b00 0x100>; + status = "disabled"; + + portc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <27>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + i2c0: i2c@ffc02200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02200 0x100>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@ffc02300 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02300 0x100>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@ffc02400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02400 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@ffc02500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02500 0x100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c4: i2c@ffc02600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02600 0x100>; + interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + L2: l2-cache@fffff000 { + compatible = "arm,pl310-cache"; + reg = <0xfffff000 0x1000>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + }; + + mmc: dwmmc0@ff808000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff808000 0x1000>; + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; + fifo-depth = <0x400>; + }; + + ocram: sram@ffe00000 { + compatible = "mmio-sram"; + reg = <0xffe00000 0x40000>; + }; + + rst: rstmgr@ffd05000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x100>; + }; + + sysmgr: sysmgr@ffd06000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd06000 0x300>; + }; + + /* Local timer */ + timer@ffffc600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xffffc600 0x100>; + interrupts = <1 13 0xf04>; + }; + + timer0: timer0@ffc02700 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xffc02700 0x100>; + }; + + timer1: timer1@ffc02800 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xffc02800 0x100>; + }; + + timer2: timer2@ffd00000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xffd00000 0x100>; + }; + + timer3: timer3@ffd00100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xffd01000 0x100>; + }; + + uart0: serial0@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x100>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1: serial1@ffc02100 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02100 0x100>; + interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0xffff>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0xffff>; + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + watchdog0: watchdog@ffd00200 { + compatible = "snps,dw-wdt"; + reg = <0xffd00200 0x100>; + interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd00300 { + compatible = "snps,dw-wdt"; + reg = <0xffd00300 0x100>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dts b/arch/arm/boot/dts/socfpga_arria10_socdk.dts new file mode 100755 index 000000000000..3015ce8d3057 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2014 Altera Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/dts-v1/; +#include "socfpga_arria10.dtsi" + +/ { + model = "Altera SOCFPGA Arria 10"; + compatible = "altr,socfpga-arria10", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200 rootwait"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + + serial0@ffc02000 { + status = "okay"; + }; + }; +}; -- cgit v1.2.3 From d574454160cf13c34bf25782b62524eb33679966 Mon Sep 17 00:00:00 2001 From: George McCollister Date: Mon, 17 Nov 2014 13:02:35 -0600 Subject: ARM: dts: Add devicetree for NovaTech OrionLXm This adds the NovaTech OrionLXm which is based on the AM335x SoC http://www.novatechweb.com/substation-automation/orionlxm/ RAM: 512MiB Flash: 4GB eMMC Ethernet PHYs: 2x Micrel KSZ8041FTLI USB ports are used internally by the expansion cards. Internal micro SD slot is available. Signed-off-by: George McCollister Reviewed-by: Felipe Balbi Signed-off-by: Tony Lindgren --- .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/am335x-lxm.dts | 362 +++++++++++++++++++++ 3 files changed, 367 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/am335x-lxm.dts diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ddd9bcdf889c..4f6a82cef1d1 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -132,6 +132,9 @@ Boards: - AM335X Bone : Low cost community board compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" +- AM335X OrionLXm : Substation Automation Platform + compatible = "novatech,am335x-lxm", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a77cec87acbd..99b4df1c1f76 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -333,7 +333,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-nano.dtb \ - am335x-pepper.dtb + am335x-pepper.dtb \ + am335x-lxm.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts new file mode 100644 index 000000000000..7266a00aab2e --- /dev/null +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -0,0 +1,362 @@ +/* + * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "NovaTech OrionLXm"; + compatible = "novatech,am335x-lxm", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + /* Power supply provides a fixed 5V @2A */ + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; +}; + +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */ + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */ + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */ + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */ + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */ + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */ + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + serial_config1: serial_config1@20 { + compatible = "nxp,pca9539"; + reg = <0x20>; + }; + + serial_config2: serial_config2@21 { + compatible = "nxp,pca9539"; + reg = <0x21>; + }; + + tps: tps@2d { + compatible = "ti,tps65910"; + reg = <0x2d>; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + /* vrtc - unused */ + + vio_reg: regulator@1 { + regulator-name = "vio_1v5,ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + regulator-name = "vdd1,mpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + regulator-name = "vdd2_1v1,core"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd3 - unused */ + + /* vdig1 - unused */ + + vdig2_reg: regulator@6 { + regulator-name = "vdig2_1v8,vdds_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vpll - unused */ + + vdac_reg: regulator@8 { + regulator-name = "vdac_1v8,vdds"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-name = "vaux1_1v8,usb"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-name = "vaux2_3v3,io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-name = "vaux33_3v3,usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-name = "vmmc_3v3,io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rmii"; + dual_emac_res_vlan = <2>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rmii"; + dual_emac_res_vlan = <3>; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; + status = "okay"; +}; + -- cgit v1.2.3 From 0db8899aa7c9c12844b829caa539953217c023ae Mon Sep 17 00:00:00 2001 From: Adam YH Lee Date: Thu, 13 Nov 2014 10:04:33 -0800 Subject: ARM: dts: Gumstix DuoVero: Bind vdac regulator to hdmi node The HDMI node does not have a power supply attached. As a result its power regulator, VDAC, shuts off on boot and screen loses signal. This attaches VDAC (vdda_hdmi_dac) to HDMI's vdda-supply. Signed-off-by: Adam YH Lee Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-duovero-parlor.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 6dc84d9f9b4c..1a78f013f37a 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -177,6 +177,7 @@ &hdmi { status = "ok"; + vdda-supply = <&vdac>; pinctrl-names = "default"; pinctrl-0 = <&dss_hdmi_pins>; -- cgit v1.2.3 From 406c07e7ed23337e01b908b2882886f48a49c30c Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Sat, 15 Nov 2014 02:47:30 +0100 Subject: ARM: dts: OMAP3-N900: add si4713 support Add si4713 node to the N900 device tree file. Signed-off-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 99afa26c9ab6..de15feac259b 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -567,6 +567,16 @@ power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ }; + si4713: si4713@63 { + compatible = "silabs,si4713"; + reg = <0x63>; + + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ + reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ + vio-supply = <&vio>; + vdd-supply = <&vaux1>; + }; + bq24150a: bq24150a@6b { compatible = "ti,bq24150a"; reg = <0x6b>; -- cgit v1.2.3 From 28398c69a7f99861d9631d5cfbadf8cd054ccf93 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Sat, 15 Nov 2014 03:08:24 +0100 Subject: ARM: dst: OMAP3-N900: Add n900-battery support This adds support for the N900's battery to the Nokia N900 DTS file. Signed-off-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index de15feac259b..6fbf44a4bf5e 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -115,6 +115,12 @@ eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; }; + + battery: n900-battery { + compatible = "nokia,n900-battery"; + io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>; + io-channel-names = "temp", "bsi", "vbat"; + }; }; &omap3_pmx_core { -- cgit v1.2.3 From bc078316d86c8467b367392f420d75e28e0b2d7e Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 19 Nov 2014 17:53:08 +0530 Subject: ARM: dts: DRA7: Add node for RTC Add node for RTC. Note that on dra7xx are no separate interrupts for alram and timer unlike for SoCs. Signed-off-by: Lokesh Vutla [nm@ti.com: update with rtc crossbar number] Signed-off-by: Nishanth Menon [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 9cd99b931302..1442b48c4b04 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1157,6 +1157,15 @@ status = "disabled"; }; + rtc@48838000 { + compatible = "ti,am3352-rtc"; + reg = <0x48838000 0x100>; + interrupts = , + ; + ti,hwmods = "rtcss"; + clocks = <&sys_32k_ck>; + }; + omap_control_usb2phy1: control-phy@4a002300 { compatible = "ti,control-phy-usb2"; reg = <0x4a002300 0x4>; -- cgit v1.2.3 From 274ac841f5b9d1da30478c1999d39497a988ab43 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Tue, 18 Nov 2014 11:13:16 +0200 Subject: ARM: dts: cm-t3x: cleanup comments indentation Fix comment style Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index b074673703bf..e4c0c562d27b 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -107,12 +107,12 @@ dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ >; }; }; -- cgit v1.2.3 From 299e5515b1f2aaf3d67cc0ad1d1994689ae106ab Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Tue, 18 Nov 2014 11:13:17 +0200 Subject: ARM: dts: cm-t3x: add ADS7846 touchscreen support Add ADS7846 touchscreen support. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 57 +++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e4c0c562d27b..3636fed56b65 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -49,6 +49,13 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb2_power>; }; + + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &omap3_pmx_core { @@ -115,6 +122,21 @@ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ >; }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */ + >; + }; }; &uart3 { @@ -147,3 +169,38 @@ &usbhsehci { phys = <&hsusb1_phy &hsusb2_phy>; }; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio2>; + interrupts = <25 0>; /* gpio_57 */ + pendown-gpio = <&gpio2 25 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + ti,debounce-max = /bits/ 16 <30>; + ti,debounce-tol = /bits/ 16 <10>; + ti,debounce-rep = /bits/ 16 <1>; + + linux,wakeup; + }; +}; -- cgit v1.2.3 From 7dcfa7e1e27b6d3823ec77e6b4f0a6828690e1b2 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Tue, 18 Nov 2014 11:13:18 +0200 Subject: ARM: OMAP2+: remove cm-t3x touchscreen pdata quirk Remove ADS7846 touchscreen pdata quirk for CM-T3x CoMs Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e72f0fc91b02..02080c08ea0f 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -131,13 +131,11 @@ static void __init omap3_sbc_t3730_legacy_init(void) { omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136); - omap_ads7846_init(1, 57, 0, NULL); } static void __init omap3_sbc_t3530_legacy_init(void) { omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); - omap_ads7846_init(1, 57, 0, NULL); } struct ti_st_plat_data wilink_pdata = { @@ -249,7 +247,6 @@ static void __init omap3_sbc_t3517_legacy_init(void) hsmmc2_internal_input_clk(); omap3_sbc_t3517_wifi_init(); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145); - omap_ads7846_init(1, 57, 0, NULL); } static void __init am3517_evm_legacy_init(void) -- cgit v1.2.3 From 0cdb8255c0d5742c7112bf9b9d2b0a53512039fd Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Tue, 18 Nov 2014 11:13:19 +0200 Subject: ARM: dts: cm-t3x: add EEPROM support Add at24 EEPROM chip support. Signed-off-by: Dmitry Lifshitz [tony@atomide.com: updated to remove missing i2c1_pins] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 3636fed56b65..3a98ce10169e 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -156,11 +156,18 @@ &i2c1 { clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; }; &i2c3 { clock-frequency = <400000>; }; + &usbhshost { port1-mode = "ehci-phy"; port2-mode = "ehci-phy"; -- cgit v1.2.3 From e35351bb711c031bc802f8e865dbca39060d1d11 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Tue, 18 Nov 2014 11:13:20 +0200 Subject: ARM: dts: sb-t35: add EEPROM support Add at24 EEPROM chip support. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-sb-t35.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index b1cb5774f49a..aff733e4ad59 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -58,6 +58,26 @@ OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ >; }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; }; &gpmc { -- cgit v1.2.3 From 828b949f4bf42d261448660caf012a589d061e13 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Tue, 18 Nov 2014 11:13:24 +0200 Subject: ARM: dts: cm-t3x30: add keypad support Add twl4030 matrtix keypad support. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 25ba08331d88..3cbaf98c1372 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -64,6 +64,7 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include &mmc1 { vmmc-supply = <&vmmc1>; @@ -75,6 +76,22 @@ ti,pullups = <0x000001>; }; +&twl_keypad { + linux,keymap = < + MATRIX_KEY(0x00, 0x01, KEY_A) + MATRIX_KEY(0x00, 0x02, KEY_B) + MATRIX_KEY(0x00, 0x03, KEY_LEFT) + + MATRIX_KEY(0x01, 0x01, KEY_UP) + MATRIX_KEY(0x01, 0x02, KEY_ENTER) + MATRIX_KEY(0x01, 0x03, KEY_DOWN) + + MATRIX_KEY(0x02, 0x01, KEY_RIGHT) + MATRIX_KEY(0x02, 0x02, KEY_C) + MATRIX_KEY(0x02, 0x03, KEY_D) + >; +}; + &hsusb1_phy { reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>; }; -- cgit v1.2.3 From 0f39f7b906dbeabe2ffd8739d5201e890d102ea6 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 21 Nov 2014 15:44:22 +0530 Subject: ARM: dts: AM43xx: add tscadc DT entries for am437x-evm and am43x-epos-evm This patch adds tscadc DT entries for am437x-gp-evm and am43x-epos-evm. Signed-off-by: Vignesh R Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/am437x-gp-evm.dts | 8 ++++++++ arch/arm/boot/dts/am43x-epos-evm.dts | 8 ++++++++ 3 files changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 4367f7550183..815eabf7f449 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -668,6 +668,26 @@ }; }; + tscadc: tscadc@44e0d000 { + compatible = "ti,am3359-tscadc"; + reg = <0x44e0d000 0x1000>; + ti,hwmods = "adc_tsc"; + interrupts = ; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; + status = "disabled"; + + tsc { + compatible = "ti,am3359-tsc"; + }; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + + }; + sham: sham@53100000 { compatible = "ti,omap5-sham"; ti,hwmods = "sham"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index e7ac47fa6615..2ffd6d6dcc87 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -343,6 +343,14 @@ status = "okay"; }; +&tscadc { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + &ecap0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index bb4cb8554b4a..3ce3a19f7518 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -519,6 +519,14 @@ status = "okay"; }; +&tscadc { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + &ecap0 { status = "okay"; pinctrl-names = "default"; -- cgit v1.2.3 From 5e949f0c79917f3fd8512a3b66b0c861e03ec5a6 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Fri, 14 Nov 2014 16:57:29 +0100 Subject: ARM: mvebu: enable no-1-8-v flag for Armada 385 DB SDHCI interface The Marvell Armada 38x SoC's SDHCI interface is capable of using 1.8v voltage, needed for driving "UHS-I" SD cards at their full speed. It is not, however, possible on the DB board. Due to physical connectivity connector supply is tied to 3v and any attempt of changing voltage in order to operate in the fastest UHS modes fails. This patch enables equivalent SDHCI quirk in order to adjust controller operation to system capabilities. Signed-off-by: Marcin Wojtas Reviewed-by: Gregory CLEMENT Acked-by: Thomas Petazzoni Acked-by: Andrew Lunn Link: https://lkml.kernel.org/r/1415980652-7429-3-git-send-email-mw@semihalf.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-385-db.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index 1af886f1e486..b1257120455c 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -121,6 +121,7 @@ wp-inverted; bus-width = <8>; status = "okay"; + no-1-8-v; }; usb3@f0000 { -- cgit v1.2.3 From ebf50c9651ff28341b76e78c531592d7d3489bc6 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Fri, 14 Nov 2014 16:57:30 +0100 Subject: ARM: mvebu: remove clock-frequency from Armada 38x SDHCI Device Tree node For proper operation of Armada 38x SDHCI controller proper 'clocks' property is sufficient. Therefore it is not useful to keep an additional 'clock-frequency' property in SDHCI controller node of board-level Device Tree file for Armada 385 DB. This commit gets rid of useless 'clock-frequency' property. Signed-off-by: Marcin Wojtas Reviewed-by: Gregory CLEMENT Acked-by: Andrew Lunn Link: https://lkml.kernel.org/r/1415980652-7429-4-git-send-email-mw@semihalf.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-385-db.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index b1257120455c..2aaa9d2ac284 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -116,7 +116,6 @@ }; sdhci@d8000 { - clock-frequency = <200000000>; broken-cd; wp-inverted; bus-width = <8>; -- cgit v1.2.3 From ad6a1b445bdc19199933051840a53fdd30b8f961 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Fri, 14 Nov 2014 16:57:31 +0100 Subject: ARM: mvebu: adjust ethernet aliases according to U-Boot requirements for A38x In order to update MAC address entries in the ethernet nodes in Device Tree both mainline U-Boot and Barebox bootloaders accept the same format of aliases, which is 'ethernetX', where X stands for an interface number. Other platforms in the mainline Linux, that comprise ethernet references in '/aliases' node (like various flavours of imx or sunXi), follow the naming scheme described above. This commit ajusts ethernet aliases of Marvell Armada 38x SoC to be properly recognized by bootloaders' MAC address fixup routines. Signed-off-by: Marcin Wojtas Reviewed-by: Gregory CLEMENT Acked-by: Andrew Lunn Link: https://lkml.kernel.org/r/1415980652-7429-5-git-send-email-mw@semihalf.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-38x.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 242d0ecc99f3..74391dace9e7 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -25,9 +25,9 @@ aliases { gpio0 = &gpio0; gpio1 = &gpio1; - eth0 = ð0; - eth1 = ð1; - eth2 = ð2; + ethernet0 = ð0; + ethernet1 = ð1; + ethernet2 = ð2; }; soc { -- cgit v1.2.3 From ab1e85372168892387dd1ac171158fc8c3119be4 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 14 Nov 2014 21:43:33 +0100 Subject: ARM: mvebu: fix ordering in Armada 370 .dtsi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit a095b1c78a35 ("ARM: mvebu: sort DT nodes by address") missed placing the system-controller in the correct order. Fixes: a095b1c78a35 ("ARM: mvebu: sort DT nodes by address") Signed-off-by: Uwe Kleine-König Acked-by: Andrew Lunn Link: https://lkml.kernel.org/r/20141114204333.GS27002@pengutronix.de Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 86d33dbe52c6..509928621ea7 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -107,11 +107,6 @@ reg = <0x11100 0x20>; }; - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x100>; - }; - pinctrl { compatible = "marvell,mv88f6710-pinctrl"; reg = <0x18000 0x38>; @@ -206,6 +201,11 @@ interrupts = <91>; }; + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x100>; + }; + gateclk: clock-gating-control@18220 { compatible = "marvell,armada-370-gating-clock"; reg = <0x18220 0x4>; -- cgit v1.2.3 From a0d3c2215b9b7158621500b05f760fc84046fa50 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:45:21 +0100 Subject: arm: mvebu: fix vendor prefix typo in kirkwood-synology.dtsi As reported by Andrew, the vendor prefix for Seiko Instruments, Inc. S-35390A I2C RTC chip in kirkwood-synology.dtsi has a typo (ssi instead of sii). This patches fixes it. Note: i2c devices ignore the optional vendor prefix, which explains why it worked with the typo and also why there is no backward compatibility issues with the fix. Reported-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/0444140a267d982c3e5f5f2b7b5f2dc41d010e2a.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-synology.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 811e0971fc58..8be5b2e4626e 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -266,7 +266,7 @@ s35390a: s35390a@30 { status = "disabled"; - compatible = "ssi,s35390a"; + compatible = "sii,s35390a"; reg = <0x30>; }; }; -- cgit v1.2.3 From 181d9b28cbc9ae10e1467e2d013033b672d91d4b Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:45:35 +0100 Subject: arm: mvebu: add uartX labels for Armada SoC serial nodes This patch adds uartX labels for Armada SoC serial nodes. This is a preliminary work to be able to easily reference the serial lines in Device Tree files. One expected use is when providing stdout-path property for barebox. Reviewed-by: Thomas Petazzoni Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/0683d1a823fe9b75849f3dafcf1cf6ee291cdca6.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 5 +++-- arch/arm/boot/dts/armada-xp.dtsi | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 4d84ca981fe0..2057351ed00b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -151,7 +151,7 @@ status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; @@ -160,7 +160,8 @@ clocks = <&coreclk 0>; status = "disabled"; }; - serial@12100 { + + uart1: serial@12100 { compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index a3919b644737..e4ba27ef109b 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -53,7 +53,7 @@ reg = <0x11100 0x100>; }; - serial@12200 { + uart2: serial@12200 { compatible = "snps,dw-apb-uart"; reg = <0x12200 0x100>; reg-shift = <2>; @@ -62,7 +62,8 @@ clocks = <&coreclk 0>; status = "disabled"; }; - serial@12300 { + + uart3: serial@12300 { compatible = "snps,dw-apb-uart"; reg = <0x12300 0x100>; reg-shift = <2>; -- cgit v1.2.3 From f19d09e430a6a67d3a5c79e861bae97133caf521 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:45:44 +0100 Subject: arm: mvebu: use recently introduced uart label for stdout-path Now that labels for uartX are available in Marvell Armada .dtsi files, this patch replaces the "/soc/internal-regs/serial@12000" found in armada-xp-lenovo-ix4-300d.dts file for stdout-path property by the more concise &uart0. Reviewed-by: Thomas Petazzoni Suggested-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/d1a883510e01f7f212a385e826dccbef903fae42.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index aa5463c91924..088d8d2fe9eb 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -22,7 +22,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = "/soc/internal-regs/serial@12000"; + stdout-path = &uart0; }; memory { -- cgit v1.2.3 From 4904a82a9399d037588162e6fb4b293fa6a37f7c Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:45:56 +0100 Subject: arm: mvebu: move Armada 370/XP pinctrl node definition armada-370-xp.dtsi What was done by Sebastian in 264a05e19bf5 ("ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address") and 01c434225ee6 ("ARM: mvebu: armada-xp: Use pinctrl node alias") can also be done for Armada 370, i.e. - Rename Armada 370 pinctrl node to pin-ctrl with its address encoded - Add a node alias to access the pinctrl node easily. - use the newly available alias in existing Armada 370 .dts files We can even go a bit further by putting the pinctrl node definition in armada-370-xp.dtsi, with only its reg property defined. This allows us to then also use the newly defined node alias in armada-xp.dtsi, armada-370.dtsi. Suggested-by: Sebastian Hesselbarth Suggested-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/b54eb45e5242728aace3ce8aef2eae4251f8dea3.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 24 +++++ arch/arm/boot/dts/armada-370-mirabox.dts | 25 ++--- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 84 ++++++++--------- arch/arm/boot/dts/armada-370-netgear-rn104.dts | 64 ++++++------- arch/arm/boot/dts/armada-370-rd.dts | 24 ++--- arch/arm/boot/dts/armada-370-xp.dtsi | 4 + arch/arm/boot/dts/armada-370.dtsi | 121 ++++++++++++------------- arch/arm/boot/dts/armada-xp.dtsi | 72 +++++++-------- 8 files changed, 222 insertions(+), 196 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 0b7bf5ea7bd5..472b7434e80c 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -201,3 +201,27 @@ compatible = "linux,spdif-dir"; }; }; + +&pinctrl { + /* + * These pins might be muxed as I2S by + * the bootloader, but it conflicts + * with the real I2S pins that are + * muxed using i2s_pins. We must mux + * those pins to a function other than + * I2S. + */ + pinctrl-0 = <&hog_pins1 &hog_pins2>; + pinctrl-names = "default"; + + hog_pins1: hog-pins1 { + marvell,pins = "mpp6", "mpp8", "mpp10", + "mpp12", "mpp13"; + marvell,function = "gpio"; + }; + + hog_pins2: hog-pins2 { + marvell,pins = "mpp5", "mpp7", "mpp9"; + marvell,function = "gpo"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 2b6d24e0d1e8..e1b0eb6b091f 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -54,18 +54,6 @@ status = "okay"; }; - pinctrl { - pwr_led_pin: pwr-led-pin { - marvell,pins = "mpp63"; - marvell,function = "gpo"; - }; - - stat_led_pins: stat-led-pins { - marvell,pins = "mpp64", "mpp65"; - marvell,function = "gpio"; - }; - }; - gpio_leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -169,3 +157,16 @@ }; }; }; + +&pinctrl { + pwr_led_pin: pwr-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + stat_led_pins: stat-led-pins { + marvell,pins = "mpp64", "mpp65"; + marvell,function = "gpio"; + }; +}; + diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 1e38628f4060..4e24932c6e30 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -59,48 +59,6 @@ status = "okay"; }; - pinctrl { - power_led_pin: power-led-pin { - marvell,pins = "mpp57"; - marvell,function = "gpio"; - }; - - sata1_led_pin: sata1-led-pin { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - sata2_led_pin: sata2-led-pin { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - backup_led_pin: backup-led-pin { - marvell,pins = "mpp56"; - marvell,function = "gpio"; - }; - - backup_button_pin: backup-button-pin { - marvell,pins = "mpp58"; - marvell,function = "gpio"; - }; - - power_button_pin: power-button-pin { - marvell,pins = "mpp62"; - marvell,function = "gpio"; - }; - - reset_button_pin: reset-button-pin { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - poweroff: poweroff { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - }; - mdio { pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; @@ -257,3 +215,45 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; }; + +&pinctrl { + power_led_pin: power-led-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; + + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + + backup_button_pin: backup-button-pin { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + poweroff: poweroff { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index c2f414bb9aba..30586e47986a 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -53,38 +53,6 @@ status = "okay"; }; - pinctrl { - poweroff: poweroff { - marvell,pins = "mpp60"; - marvell,function = "gpio"; - }; - - backup_button_pin: backup-button-pin { - marvell,pins = "mpp52"; - marvell,function = "gpio"; - }; - - power_button_pin: power-button-pin { - marvell,pins = "mpp62"; - marvell,function = "gpio"; - }; - - backup_led_pin: backup-led-pin { - marvell,pins = "mpp63"; - marvell,function = "gpo"; - }; - - power_led_pin: power-led-pin { - marvell,pins = "mpp64"; - marvell,function = "gpio"; - }; - - reset_button_pin: reset-button-pin { - marvell,pins = "mpp65"; - marvell,function = "gpio"; - }; - }; - mdio { pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; @@ -269,3 +237,35 @@ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; }; }; + +&pinctrl { + poweroff: poweroff { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; + + backup_button_pin: backup-button-pin { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp64"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp65"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 2bb671a778db..394308951ed9 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -59,18 +59,6 @@ }; internal-regs { - pinctrl { - fan_pins: fan-pins { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - led_pins: led-pins { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; - }; - serial@12000 { status = "okay"; }; @@ -213,3 +201,15 @@ }; }; }; + +&pinctrl { + fan_pins: fan-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + led_pins: led-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 2057351ed00b..83c31c86dd09 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -171,6 +171,10 @@ status = "disabled"; }; + pinctrl: pin-ctrl@18000 { + reg = <0x18000 0x38>; + }; + coredivclk: corediv-clock@18740 { compatible = "marvell,armada-370-corediv-clock"; reg = <0x18740 0xc>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 509928621ea7..ecf0bf153fec 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -107,67 +107,6 @@ reg = <0x11100 0x20>; }; - pinctrl { - compatible = "marvell,mv88f6710-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins1: sdio-pins1 { - marvell,pins = "mpp9", "mpp11", "mpp12", - "mpp13", "mpp14", "mpp15"; - marvell,function = "sd0"; - }; - - sdio_pins2: sdio-pins2 { - marvell,pins = "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52"; - marvell,function = "sd0"; - }; - - sdio_pins3: sdio-pins3 { - marvell,pins = "mpp48", "mpp49", "mpp50", - "mpp51", "mpp52", "mpp53"; - marvell,function = "sd0"; - }; - - i2c0_pins: i2c0-pins { - marvell,pins = "mpp2", "mpp3"; - marvell,function = "i2c0"; - }; - - i2s_pins1: i2s-pins1 { - marvell,pins = "mpp5", "mpp6", "mpp7", - "mpp8", "mpp9", "mpp10", - "mpp12", "mpp13"; - marvell,function = "audio"; - }; - - i2s_pins2: i2s-pins2 { - marvell,pins = "mpp49", "mpp47", "mpp50", - "mpp59", "mpp57", "mpp61", - "mpp62", "mpp60", "mpp58"; - marvell,function = "audio"; - }; - - mdio_pins: mdio-pins { - marvell,pins = "mpp17", "mpp18"; - marvell,function = "ge"; - }; - - ge0_rgmii_pins: ge0-rgmii-pins { - marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11", "mpp12", - "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "ge0"; - }; - - ge1_rgmii_pins: ge1-rgmii-pins { - marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", - "mpp23", "mpp24", "mpp25", "mpp26", - "mpp27", "mpp28", "mpp29", "mpp30"; - marvell,function = "ge1"; - }; - }; - gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; @@ -307,3 +246,63 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + + sdio_pins1: sdio-pins1 { + marvell,pins = "mpp9", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15"; + marvell,function = "sd0"; + }; + + sdio_pins2: sdio-pins2 { + marvell,pins = "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52"; + marvell,function = "sd0"; + }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c0"; + }; + + i2s_pins1: i2s-pins1 { + marvell,pins = "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", + "mpp12", "mpp13"; + marvell,function = "audio"; + }; + + i2s_pins2: i2s-pins2 { + marvell,pins = "mpp49", "mpp47", "mpp50", + "mpp59", "mpp57", "mpp61", + "mpp62", "mpp60", "mpp58"; + marvell,function = "audio"; + }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp17", "mpp18"; + marvell,function = "ge"; + }; + + ge0_rgmii_pins: ge0-rgmii-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge1-rgmii-pins { + marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27", "mpp28", "mpp29", "mpp30"; + marvell,function = "ge1"; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index e4ba27ef109b..b59a83cf2f26 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -73,43 +73,6 @@ status = "disabled"; }; - pinctrl: pin-ctrl@18000 { - reg = <0x18000 0x38>; - - pmx_ge0_gmii: pmx-ge0-gmii { - marvell,pins = - "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp6", "mpp7", - "mpp8", "mpp9", "mpp10", "mpp11", - "mpp12", "mpp13", "mpp14", "mpp15", - "mpp16", "mpp17", "mpp18", "mpp19", - "mpp20", "mpp21", "mpp22", "mpp23"; - marvell,function = "ge0"; - }; - - pmx_ge0_rgmii: pmx-ge0-rgmii { - marvell,pins = - "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp6", "mpp7", - "mpp8", "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - - pmx_ge1_rgmii: pmx-ge1-rgmii { - marvell,pins = - "mpp12", "mpp13", "mpp14", "mpp15", - "mpp16", "mpp17", "mpp18", "mpp19", - "mpp20", "mpp21", "mpp22", "mpp23"; - marvell,function = "ge1"; - }; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; - }; - }; - system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x500>; @@ -238,3 +201,38 @@ }; }; }; + +&pinctrl { + pmx_ge0_gmii: pmx-ge0-gmii { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11", + "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge0"; + }; + + pmx_ge0_rgmii: pmx-ge0-rgmii { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1_rgmii: pmx-ge1-rgmii { + marvell,pins = + "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; +}; -- cgit v1.2.3 From a6fa8475511b556ef1130de7529c63acccc8fc65 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:46:10 +0100 Subject: arm: mvebu: define and use common Armada 370 SPI pinctrl settings This patch defines common Armada 370 pinctrl settings for spi0 and spi1 interfaces: spi0: MPP33-36 as default, MPP32,63-65 as available alternate config spi1: MPP49-52 as default Currently, the Armada 370 DB .dts file has no explicit pinctrl info for the spi0 interface used to access the flash on the board. The patch fixes that by also adding explicit pinctrl info (MPP32,63-65) for this SPI interface. Note: this patch has the potential to break out-of-tree users w/o specific pinctrl settings for their spi interfaces if the default above does not match their config. Suggested-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/1e812eb63b37718e273463e22e4d7512f8f0b624.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 2 ++ arch/arm/boot/dts/armada-370.dtsi | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 472b7434e80c..1466580be295 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -112,6 +112,8 @@ }; spi0: spi@10600 { + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; status = "okay"; spi-flash@0 { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index ecf0bf153fec..49ac064d2f33 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -99,6 +99,20 @@ wt-override; }; + /* + * Default SPI pinctrl setting, can be overwritten on + * board level if a different configuration is used. + */ + spi0: spi@10600 { + pinctrl-0 = <&spi0_pins1>; + pinctrl-names = "default"; + }; + + spi1: spi@10680 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + }; + i2c0: i2c@11000 { reg = <0x11000 0x20>; }; @@ -250,6 +264,24 @@ &pinctrl { compatible = "marvell,mv88f6710-pinctrl"; + spi0_pins1: spi0-pins1 { + marvell,pins = "mpp33", "mpp34", + "mpp35", "mpp36"; + marvell,function = "spi0"; + }; + + spi0_pins2: spi0_pins2 { + marvell,pins = "mpp32", "mpp63", + "mpp64", "mpp65"; + marvell,function = "spi0"; + }; + + spi1_pins: spi1-pins { + marvell,pins = "mpp49", "mpp50", + "mpp51", "mpp52"; + marvell,function = "spi1"; + }; + sdio_pins1: sdio-pins1 { marvell,pins = "mpp9", "mpp11", "mpp12", "mpp13", "mpp14", "mpp15"; -- cgit v1.2.3 From f8afeaea9611b5183b7919de4fb9333dedc72896 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:46:18 +0100 Subject: arm: mvebu: define and use common Armada 370 UART pinctrl settings This patch defines common Armada 370 pinctrl settings for uart0 and uart1 interfaces: uart0: MPP0-1 as default uart1: MPP41-42 as default Note: this patch has the potential to break out-of-tree users w/o specific pinctrl settings for their uart interfaces if the default above does not match their config. Suggested-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/31412e57955c98bc9cc47b70726b5072af945cc3.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 49ac064d2f33..fdb3c12a6139 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -154,6 +154,21 @@ interrupts = <91>; }; + /* + * Default UART pinctrl setting without RTS/CTS, can + * be overwritten on board level if a different + * configuration is used. + */ + uart0: serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + }; + + uart1: serial@12100 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + }; + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; @@ -282,6 +297,16 @@ marvell,function = "spi1"; }; + uart0_pins: uart0-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "uart0"; + }; + + uart1_pins: uart1-pins { + marvell,pins = "mpp41", "mpp42"; + marvell,function = "uart1"; + }; + sdio_pins1: sdio-pins1 { marvell,pins = "mpp9", "mpp11", "mpp12", "mpp13", "mpp14", "mpp15"; -- cgit v1.2.3 From d352f41e87e7226692d1346bb97c603615eeb817 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:46:28 +0100 Subject: arm: mvebu: define and use common Armada XP UART2/3 pinctrl settings This patch defines common Armada XP pinctrl settings for uart2 and uart3 interfaces (uart0 and uart1 rx/tx do not rely on MPP): uart2: MPP42-43 as default uart3: MPP44-45 as default Suggested-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/fd51c080c7139a67ec01df8d797f1e88ce557796.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index b59a83cf2f26..7cefb9b6d27c 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -55,6 +55,8 @@ uart2: serial@12200 { compatible = "snps,dw-apb-uart"; + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; reg = <0x12200 0x100>; reg-shift = <2>; interrupts = <43>; @@ -65,6 +67,8 @@ uart3: serial@12300 { compatible = "snps,dw-apb-uart"; + pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; reg = <0x12300 0x100>; reg-shift = <2>; interrupts = <44>; @@ -235,4 +239,14 @@ "mpp33", "mpp34", "mpp35"; marvell,function = "sd0"; }; + + uart2_pins: uart2-pins { + marvell,pins = "mpp42", "mpp43"; + marvell,function = "uart2"; + }; + + uart3_pins: uart3-pins { + marvell,pins = "mpp44", "mpp45"; + marvell,function = "uart3"; + }; }; -- cgit v1.2.3 From 547c653b64022618250ca9c7c30151927509ae98 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:46:39 +0100 Subject: arm: mvebu: define and use common Armada XP SPI pinctrl setting This patch defines common Armada XP pinctrl settings in armada-xp.dtsi for the supported SPI interface (MPP36-39) and use it as default for Armada XP spi interface. That being done, it removes the now redundant definitions in armada-xp-axpwifiap.dts. Note: this patch has the potential to break out-of-tree users w/o specific pinctrl settings for their spi interfaces if the default above does not match their config (i.e. if they do not use CS0). Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/d404b7abd80ee5a0fd8e8d3586d33cd37740d589.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 7 ------- arch/arm/boot/dts/armada-xp.dtsi | 11 +++++++++++ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 0e53fad111de..c9d25bdbe795 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -100,8 +100,6 @@ spi0: spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; spi-flash@0 { #address-cells = <1>; @@ -138,11 +136,6 @@ marvell,function = "gpio"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; - marvell,function = "spi"; - }; - pmx_phy_int: pmx-phy-int { marvell,pins = "mpp32"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 7cefb9b6d27c..bdb36a05c039 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -43,6 +43,11 @@ wt-override; }; + spi0: spi@10600 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + }; + i2c0: i2c@11000 { compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x100>; @@ -240,6 +245,12 @@ marvell,function = "sd0"; }; + spi0_pins: spi0-pins { + marvell,pins = "mpp36", "mpp37", + "mpp38", "mpp39"; + marvell,function = "spi"; + }; + uart2_pins: uart2-pins { marvell,pins = "mpp42", "mpp43"; marvell,function = "uart2"; -- cgit v1.2.3 From 0e76f78cb3924050e969439eff6d5cc7685deb2b Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:46:49 +0100 Subject: arm: mvebu: add .dts file for Synology DS213j Synology DS213j is a 2-bay NAS powered by a Marvell Armada 370 (88F6710 @1.2Ghz). It is very similar on many aspects to previous 2-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 512MB RAM - boot on SPI flash (64Mbit Micron N25Q064) - 1 GbE interface (Armada MAC connected to a Marvell 88E1512 PHY via SGMII) - 2 rear USB 2.0 ports (directly handled by the Armada 370) - 2 internal SATA ports handled by the Armada 370: 2 GPIO for presence, 2 for powering them - two front amber LED (disk1, disk2) controlled by the SoC - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a TI MSP430F2111) - Fan handled via 4 GPIO (3 for speed, 1 for alarm) Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/20f1a03897df1d825b62abdd525e588a8e39b3ec.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/armada-370-synology-ds213j.dts | 316 +++++++++++++++++++++++ 2 files changed, 318 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/armada-370-synology-ds213j.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 31529ccc67a0..cfcf400a3a6c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -496,7 +496,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ armada-370-netgear-rn104.dtb \ - armada-370-rd.dtb + armada-370-rd.dtb \ + armada-370-synology-ds213j.dtb dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts new file mode 100644 index 000000000000..70fecde76ccb --- /dev/null +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -0,0 +1,316 @@ +/* + * Device Tree file for Synology DS213j + * + * Copyright (C) 2014, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the old 0xd0000000). + * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot + * bootloaders provided by Marvell. It is used in recent versions of + * DSM software provided by Synology. Nonetheless, some earlier boards + * were delivered with an older version of u-boot that left internal + * registers mapped at 0xd0000000. If you have such a device you will + * not be able to directly boot a kernel based on this Device Tree. In + * that case, the preferred solution is to update your bootloader (e.g. + * by upgrading to latest version of DSM, or building a new one and + * installing it from u-boot prompt) or adjust the Devive Tree + * (s/0xf1000000/0xd0000000/ in 'ranges' below). + */ + +/dts-v1/; + +#include +#include +#include "armada-370.dtsi" + +/ { + model = "Synology DS213j"; + compatible = "synology,ds213j", "marvell,armada370", + "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + + internal-regs { + + /* RTC provided by Seiko S-35390A I2C RTC chip below */ + rtc@10300 { + status = "disabled"; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000c0000>; /* 768KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000c0000 0x002d0000>; /* 2880KB */ + }; + + partition@00390000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x00390000 0x00440000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; + + /* Main device RTC chip */ + s35390a: s35390a@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + }; + + /* Connected to a header on device's PCB */ + serial@12000 { + status = "okay"; + }; + + /* Connected to a TI MSP430F2111 for power control */ + serial@12100 { + status = "okay"; + }; + + poweroff@12100 { + compatible = "synology,power-off"; + reg = <0x12100 0x100>; + clocks = <&coreclk 0>; + }; + + /* rear USB port, near reset button */ + usb@50000 { + status = "okay"; + }; + + /* rear USB port, near RJ45 port */ + usb@51000 { + status = "okay"; + }; + + mdio { + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + }; + }; + + gpio-fan-32-38 { + status = "okay"; + compatible = "gpio-fan"; + pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin + &fan_ctrl_high_pin &fan_alarm_pin>; + pinctrl-names = "default"; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH + &gpio2 0 GPIO_ACTIVE_HIGH + &gpio2 1 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 1000 1 + 1150 2 + 1350 4 + 1500 3 + 1650 5 + 1750 6 + 1900 7 >; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&disk1_led_pin + &disk2_led_pin>; + pinctrl-names = "default"; + + disk1-led-amber { + label = "synology:amber:disk1"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + disk2-led-amber { + label = "synology:amber:disk2"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>; + pinctrl-names = "default"; + + sata1_regulator: sata1-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + sata2_regulator: sata2-regulator { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA2 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + disk1_led_pin: disk1-led-pin { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + disk2_led_pin: disk2-led-pin { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + sata1_pwr_pin: sata1-pwr-pin { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + sata2_pwr_pin: sata2-pwr-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + sata1_pres_pin: sata1-pres-pin { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; + + sata2_pres_pin: sata2-pres-pin { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + syno_id_bit0_pin: syno-id-bit0-pin { + marvell,pins = "mpp55"; + marvell,function = "gpio"; + }; + + syno_id_bit1_pin: syno-id-bit1-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + + syno_id_bit2_pin: syno-id-bit2-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; + + syno_id_bit3_pin: syno-id-bit3-pin { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + + fan_ctrl_low_pin: fan-ctrl-low-pin { + marvell,pins = "mpp65"; + marvell,function = "gpio"; + }; + + fan_ctrl_mid_pin: fan-ctrl-mid-pin { + marvell,pins = "mpp64"; + marvell,function = "gpio"; + }; + + fan_ctrl_high_pin: fan-ctrl-high-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + fan_alarm_pin: fan-alarm-pin { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; +}; -- cgit v1.2.3 From 389c74aaace1ae2a423184b03d8198311fef2c7d Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 00:46:57 +0100 Subject: arm: mvebu: add .dts file for Synology DS414 Synology DS414 is a 4-bay NAS powered by a Marvell Armada XP (mv78230 dual-core @1.33Ghz). It is very similar on many aspects to previous 4-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 1GB RAM - Boot on SPI flash (64Mbit Micron N25Q064) - 2 GbE interfaces (Armada MAC connected to two Marvell 88E1512 PHY via RGMII) - 1 front USB 2.0 ports (directly handled by the Armada 370) - 2 rear USB 3.0 ports (handled by an EtronTech EJ168A XHCI controller on the PCIe bus) - 4 internal SATA ports handled by a Marvell 88SX7042 SATA-II controller on the PCIe bus) - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a Microchip PIC16F883) Additional note: the front LEDs the and the two fans are not directly connected to the SoC and under its control. The former are presumably driven by the SATA controller, the latter by the PIC. [ jac: fixed up s/ge[01]_rgmii_pins/pmx_ge[01]_rgmii/ to match armada-xp.dtsi ] Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/5b678d6d1f2f42f4bf0d087878b9d8024d463ea7.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/armada-xp-synology-ds414.dts | 330 +++++++++++++++++++++++++ 2 files changed, 332 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/armada-xp-synology-ds414.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cfcf400a3a6c..88346b317d76 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -510,7 +510,8 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-lenovo-ix4-300d.dtb \ armada-xp-matrix.dtb \ armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb + armada-xp-openblocks-ax3-4.dtb \ + armada-xp-synology-ds414.dtb dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-cubox-es.dtb \ diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts new file mode 100644 index 000000000000..ba5e94d27c21 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -0,0 +1,330 @@ +/* + * Device Tree file for Synology DS414 + * + * Copyright (C) 2014, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the old 0xd0000000). + * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot + * bootloaders provided by Marvell. It is used in recent versions of + * DSM software provided by Synology. Nonetheless, some earlier boards + * were delivered with an older version of u-boot that left internal + * registers mapped at 0xd0000000. If you have such a device you will + * not be able to directly boot a kernel based on this Device Tree. In + * that case, the preferred solution is to update your bootloader (e.g. + * by upgrading to latest version of DSM, or building a new one and + * installing it from u-boot prompt) or adjust the Devive Tree + * (s/0xf1000000/0xd0000000/ in 'ranges' below). + */ + +/dts-v1/; + +#include +#include +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Synology DS414"; + compatible = "synology,ds414", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1GB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* + * Connected to Marvell 88SX7042 SATA-II controller + * handling the four disks. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * Connected to EtronTech EJ168A XHCI controller + * providing the two rear USB 3.0 ports. + */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + + /* RTC is provided by Seiko S-35390A below */ + rtc@10300 { + status = "disabled"; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000d0000>; /* 832KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000d0000 0x002d0000>; /* 2880KB */ + }; + + partition@003a0000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x003a0000 0x00430000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; + }; + + i2c@11000 { + clock-frequency = <400000>; + status = "okay"; + + s35390a: s35390a@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + }; + + /* Connected to a header on device's PCB. This + * provides the main console for the device. + * + * Warning: the device may not boot with a 3.3V + * USB-serial converter connected when the power + * button is pressed. The converter needs to be + * connected a few seconds after pressing the + * power button. This is possibly due to UART0_TXD + * pin being sampled at reset (bit 0 of SAR). + */ + serial@12000 { + status = "okay"; + }; + + /* Connected to a Microchip PIC16F883 for power control */ + serial@12100 { + status = "okay"; + }; + + poweroff@12100 { + compatible = "synology,power-off"; + reg = <0x12100 0x100>; + clocks = <&coreclk 0>; + }; + + /* Front USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1512 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + pinctrl-0 = <&pmx_ge0_rgmii>; + pinctrl-names = "default"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + pinctrl-0 = <&pmx_ge1_rgmii>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin + &sata3_pwr_pin &sata4_pwr_pin>; + pinctrl-names = "default"; + + sata1_regulator: sata1-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + sata2_regulator: sata2-regulator { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA2 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + sata3_regulator: sata3-regulator { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "SATA3 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <6000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + + sata4_regulator: sata4-regulator { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "SATA4 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <8000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + sata1_pwr_pin: sata1-pwr-pin { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + sata2_pwr_pin: sata2-pwr-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + sata3_pwr_pin: sata3-pwr-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + sata4_pwr_pin: sata4-pwr-pin { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + sata1_pres_pin: sata1-pres-pin { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + sata2_pres_pin: sata2-pres-pin { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + + sata3_pres_pin: sata3-pres-pin { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + sata4_pres_pin: sata4-pres-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + syno_id_bit0_pin: syno-id-bit0-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + pmx_syno_id_bit1: syno-id-bit1-pin { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_syno_id_bit2: syno-id-bit2-pin { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_fan1_alarm: fan1-alarm-pin { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + fan2_alarm_pin: fan2-alarm-pin { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; +}; -- cgit v1.2.3 From bf61eed9d08ff331dc48594d57ccb95d25c977a3 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Sat, 22 Nov 2014 22:58:09 +0900 Subject: ARM: dts: Device tree node definition for TMU on exynos4x12 The TMU device tree node definition for Exynos4x12 family of SoCs. Signed-off-by: Lukasz Majewski Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4x12.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 861bb919f6d3..2e9f1f7be77b 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -271,4 +271,14 @@ compatible = "samsung,exynos4x12-usb2-phy"; samsung,sysreg-phandle = <&sys_reg>; }; + + tmu@100C0000 { + compatible = "samsung,exynos4412-tmu"; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + reg = <0x100C0000 0x100>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; + }; }; -- cgit v1.2.3 From 432047f947bac093a4b322765fc2ce365353bc61 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Sat, 22 Nov 2014 22:58:09 +0900 Subject: ARM: dts: Enable TMU support for exynos4412-trats2 This patch enables support for TMU at Exynos4412 based Trats2 board. Signed-off-by: Lukasz Majewski Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 8ee20bd09557..4c6e58a6b8cb 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -589,6 +589,11 @@ status = "okay"; }; + tmu@100C0000 { + vtmu-supply = <&ldo10_reg>; + status = "okay"; + }; + i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&gpy2 4 0>, <&gpy2 5 0>; -- cgit v1.2.3 From 0357a4438d531ef3cf529e80ffcd208eb8e35f55 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 22 Nov 2014 23:13:03 +0900 Subject: ARM: dts: Specify default clocks for Exynos4 camera devices Specify the default mux and divider clocks in device tree to ensure the FIMC devices on Trats, Trats2, Universal_c210 and Odroid X2/U3 boards are clocked from recommended clock source and with maximum supported frequency. For Trats2 also the MIPI-CSIS and the camera sensor clocks are configured, the 'clock-frequency' property is deprecated in favour of 'assigned-clock-rates' property. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210-trats.dts | 16 +++++++++++++ arch/arm/boot/dts/exynos4210-universal_c210.dts | 16 +++++++++++++ arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 16 +++++++++++++ arch/arm/boot/dts/exynos4412-trats2.dts | 32 ++++++++++++++++++++++--- 4 files changed, 77 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index f516da9e8b3a..720836205546 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -431,18 +431,34 @@ fimc_0: fimc@11800000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; fimc_1: fimc@11810000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; fimc_2: fimc@11820000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; fimc_3: fimc@11830000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index d50eb3aa708e..aaf0cae4f5e8 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -473,18 +473,34 @@ fimc_0: fimc@11800000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; fimc_1: fimc@11810000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; fimc_2: fimc@11820000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; fimc_3: fimc@11830000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index c697ff01ae8d..adf13311cf91 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -82,18 +82,34 @@ fimc_0: fimc@11800000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; fimc_1: fimc@11810000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; fimc_2: fimc@11820000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; fimc_3: fimc@11830000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 4c6e58a6b8cb..b86120db84da 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -706,28 +706,51 @@ pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>, + <&clock CLK_MOUT_CAM1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_MOUT_MPLL_USER_T>; fimc_0: fimc@11800000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; fimc_1: fimc@11810000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; fimc_2: fimc@11820000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; fimc_3: fimc@11830000 { status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; }; csis_0: csis@11880000 { status = "okay"; vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; - clock-frequency = <176000000>; + assigned-clocks = <&clock CLK_MOUT_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; /* Camera C (3) MIPI CSI-2 (CSIS0) */ port@3 { @@ -741,10 +764,13 @@ }; csis_1: csis@11890000 { + status = "okay"; vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; - clock-frequency = <160000000>; - status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; /* Camera D (4) MIPI CSI-2 (CSIS1) */ port@4 { -- cgit v1.2.3 From 249358cbd4e01e9fd38ac21bc43f00efcb8f9043 Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 22 Nov 2014 23:19:18 +0900 Subject: ARM: dts: add pwm node for exynos4412-trats2 This patch add PWM(Pulse Width Modulation) node and handle to use pwm property. Signed-off-by: Jaewon Kim Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index b86120db84da..5a06197f0d66 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -641,6 +641,13 @@ }; }; + pwm: pwm@139D0000 { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; + }; + dsi_0: dsi@11C80000 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; -- cgit v1.2.3 From d9c6808948f6507f67f3efcaba02c1031ccc3e19 Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 22 Nov 2014 23:19:22 +0900 Subject: ARM: dts: Add max77693-haptic node for exynos4412-trats2 This patch adds max77693-haptic node to support for haptic motor driver. Signed-off-by: Jaewon Kim Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 5a06197f0d66..29231b452643 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -543,6 +543,12 @@ regulator-max-microamp = <2580000>; }; }; + + max77693_haptic { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; }; }; -- cgit v1.2.3 From a8ba84dd5abac348eb8121a71f66507ec26a101a Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Sat, 22 Nov 2014 23:31:03 +0900 Subject: ARM: dts: Add usb3503 pinctrl to exynos5250-spring Reported-by: Doug Anderson Signed-off-by: Andreas Faerber Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-spring.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index f5566f84d885..310764b6e28d 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -52,6 +52,8 @@ usb-hub { compatible = "smsc,usb3503a"; reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hsic_reset>; }; fixed-rate-clocks { -- cgit v1.2.3 From 69538f61e801e4ee84961dfdb74fcd58a725965e Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Sat, 22 Nov 2014 23:31:07 +0900 Subject: ARM: dts: Add temperature sensor to exynos5250-spring Spotted in the Chrome OS 3.8 based device tree. Needs CONFIG_SENSORS_LM90. Signed-off-by: Andreas Faerber Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-spring.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 310764b6e28d..cc3361afba49 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -383,6 +383,11 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + + temperature-sensor@4c { + compatible = "gmt,g781"; + reg = <0x4c>; + }; }; &i2c_8 { -- cgit v1.2.3 From 71e21bd4ce655ab3b1b3c99ace68b6c284348f2c Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Sat, 22 Nov 2014 23:31:13 +0900 Subject: ARM: dts: Add trackpad to exynos5250-spring The HP Chromebook 11 uses an Atmel maXTouch as trackpad. The keymap was found by trial-and-error. Signed-off-by: Andreas Faerber Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-spring.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index cc3361afba49..f02775487cd4 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -330,6 +330,22 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; + + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = ; + wakeup-source; + }; }; /* @@ -465,6 +481,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-3"; samsung,pin-function = <0>; -- cgit v1.2.3 From 59760009658f111ff2b9a83802bb8f99f87a8e1a Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 22 Nov 2014 23:37:02 +0900 Subject: ARM: dts: Specify audio clock parents and rates for exynos4412-odroid-common This ensures the core and the audio subsystem clocks are configured properly, as expected by the sound machine driver. These bits are missing to obtain proper audio sample rates in kernel v3.17, where audio support for Odroid X2/U3 was first added. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index adf13311cf91..3fbf588682b9 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -45,6 +45,16 @@ compatible = "samsung,odroidx2-audio"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98090>; + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <192000000>, + <19200000>; }; mmc@12550000 { -- cgit v1.2.3 From e7160bfc02fbc890af73f0c38684f3fcb5148945 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Sat, 22 Nov 2014 23:44:11 +0900 Subject: ARM: dts: add missing clock to MFC device for exynos4 sclk_mfc is required for MFC device since commit 0c2272170d78f826f6e97f99fb8a67fc17feef07 ("media: s5p-mfc: rename special clock to sclk_mfc"), so add it to exynos4 dts. Signed-off-by: Marek Szyprowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e0278ecbc816..b8168f1f8139 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -392,8 +392,8 @@ reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; - clocks = <&clock CLK_MFC>; - clock-names = "mfc"; + clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; + clock-names = "mfc", "sclk_mfc"; status = "disabled"; }; -- cgit v1.2.3 From b77d43943ea83997c6c37b8831d1561981d499c5 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 22 Nov 2014 16:23:28 +0100 Subject: ARM: dts: rockchip: temporarily disable smp on rk3288 Stock firmware on rk3288 does not initizalize the CNTVOFF registers of the architected timer correctly. This introduces issues with the newly added SMP support for rk3288, resulting in rcu stalls due to differing timer values per core. There exist preliminary and tested patches for u-boot for this problem, but there are a minority of boards using other bootloaders like coreboot. There also is currently a second solution for miss-initialized architected timers in the works: - clocksource: arch_timer: Fix code to use physical timers when requested - clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers Therefore disable smp on rk3288 again till these are finalized, also allowing coreboot-based boards to boot again. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 0f50d5d44345..ebcd2d2eef74 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -46,7 +46,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "rockchip,rk3066-smp"; rockchip,pmu = <&pmu>; cpu0: cpu@500 { -- cgit v1.2.3 From 685570aba0078e5d7805a8458e45a3e16c0d8384 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 18 Sep 2014 20:23:48 -0300 Subject: ARM: dts: imx53: Improve SSI clocks description SSI block has 'ipg' clock for internal peripheral access and also 'baud' clock for generating bit clock when SSI operates in master mode. Add the extra 'baud' clock so that we can have SSI functional in master mode. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index f91725b2e8ab..2a5012a5202e 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -227,7 +227,9 @@ "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <30>; - clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, + <&clks IMX5_CLK_SSI2_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 24 1 0>, <&sdma 25 1 0>; dma-names = "rx", "tx"; @@ -675,7 +677,9 @@ "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; interrupts = <29>; - clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, + <&clks IMX5_CLK_SSI1_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 28 0 0>, <&sdma 29 0 0>; dma-names = "rx", "tx"; @@ -703,7 +707,9 @@ "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; interrupts = <96>; - clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, + <&clks IMX5_CLK_SSI3_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 46 0 0>, <&sdma 47 0 0>; dma-names = "rx", "tx"; -- cgit v1.2.3 From 53ec874846d9a0a8da5ca95a8891372c7e734367 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 18 Sep 2014 20:23:49 -0300 Subject: ARM: dts: imx51: Improve SSI clocks description SSI block has 'ipg' clock for internal peripheral access and also 'baud' clock for generating bit clock when SSI operates in master mode. Add the extra 'baud' clock so that we can have SSI functional in master mode. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51.dtsi | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 92660e1fe1fc..c0116cffc513 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -214,7 +214,9 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; - clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, + <&clks IMX5_CLK_SSI2_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 24 1 0>, <&sdma 25 1 0>; dma-names = "rx", "tx"; @@ -504,7 +506,9 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; - clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, + <&clks IMX5_CLK_SSI1_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 28 0 0>, <&sdma 29 0 0>; dma-names = "rx", "tx"; @@ -560,7 +564,9 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; - clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, + <&clks IMX5_CLK_SSI3_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 46 0 0>, <&sdma 47 0 0>; dma-names = "rx", "tx"; -- cgit v1.2.3 From 81c4831907fb00efdc97093b09e333009a57d005 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 24 Sep 2014 18:20:09 +0200 Subject: ARM: dts: vf610: Add ARM Global Timer Add Global Timer support which is part of the private peripherals of the Cortex-A5 processor. This Global Timer is compatible with the Cortex-A9 implementation. It's a 64-bit timer and is clocked by the peripheral clock, which is typically 133 or 166MHz on Vybrid. Signed-off-by: Stefan Agner Acked-by: Bill Pringlemeir Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 4d2ec32de96f..25031d3d2633 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -11,6 +11,7 @@ #include "vf610-pinfunc.h" #include #include +#include / { aliases { @@ -83,6 +84,13 @@ <0x40002100 0x100>; }; + global_timer: timer@40002200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x40002200 0x20>; + interrupts = ; + clocks = <&clks VF610_CLK_PLATFORM_BUS>; + }; + L2: l2-cache@40006000 { compatible = "arm,pl310-cache"; reg = <0x40006000 0x1000>; -- cgit v1.2.3 From a1d00bc592ece539296e0104107877700819c32c Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Wed, 17 Sep 2014 13:46:28 +0530 Subject: ARM: dts: vf610: Add PWM second instance Signed-off-by: Bhuvanchandra DV Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 25031d3d2633..699da487222d 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -218,6 +218,19 @@ status = "disabled"; }; + pwm1: pwm@40039000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40039000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM1>, + <&clks VF610_CLK_FTM1_EXT_SEL>, + <&clks VF610_CLK_FTM1_FIX_SEL>, + <&clks VF610_CLK_FTM1_EXT_FIX_EN>; + status = "disabled"; + }; + adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; -- cgit v1.2.3 From 9c42fa1d94e5b0d0ed11f5b9762a9b7acb1fcf15 Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Mon, 22 Sep 2014 15:38:11 +0530 Subject: ARM: dts: vf610-colibri: Add PWM support The Colibri standard defines four pins as PWM outputs, two of them (PWM A and C) are routed to FTM instance 0 and the other two (PWM B and D) are routed to FTM instance 1. Hence enable both FTM instances for the Colibri module and mux the four pins accordingly. Signed-off-by: Bhuvanchandra DV Acked-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 8 ++++++++ arch/arm/boot/dts/vf610-colibri.dtsi | 24 ++++++++++++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index 7fb306679341..00f63d936aab 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -33,6 +33,14 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 0cd83434b073..1f73c1c824e5 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -44,6 +44,16 @@ arm,tag-latency = <3 2 3>; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -97,6 +107,20 @@ >; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1182 + VF610_PAD_PTB1__FTM0_CH1 0x1182 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + VF610_PAD_PTB8__FTM1_CH0 0x1182 + VF610_PAD_PTB9__FTM1_CH1 0x1182 + >; + }; + pinctrl_uart0: uart0grp { fsl,pins = < VF610_PAD_PTB10__UART0_TX 0x21a2 -- cgit v1.2.3 From bc20265a1420570c4d82038cb3ef4b155ac96b85 Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Mon, 22 Sep 2014 15:38:12 +0530 Subject: ARM: dts: vf610-colibri: Add backlight support Signed-off-by: Bhuvanchandra DV Acked-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 6 ++++++ arch/arm/boot/dts/vf610-colibri.dtsi | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index 00f63d936aab..711cf823e794 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -19,6 +19,12 @@ }; }; +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 1f73c1c824e5..807953b5494a 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -25,6 +25,11 @@ }; }; + bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 5000000 0>; + status = "disabled"; + }; }; &esdhc1 { -- cgit v1.2.3 From afe256340e7086f8032dfe99f6c118e159256660 Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Fri, 26 Sep 2014 18:07:22 +0530 Subject: ARM: dts: vf610-colibri: Add ADC support Enable ADC support for Colibri VF61 modules Signed-off-by: Sanchayan Maity Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-colibri.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 807953b5494a..eded7beecdae 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -32,6 +32,14 @@ }; }; +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; -- cgit v1.2.3 From 791f416608a5b7144e4e83e8f6e01ab42cf82857 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 26 Sep 2014 15:41:03 +0200 Subject: ARM: dts: imx53: add cpufreq-dt support Add all required properties for the cpufreq-dt driver. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 2a5012a5202e..a30bddfdbdb6 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -46,10 +46,21 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; + clocks = <&clks IMX5_CLK_ARM>; + clock-latency = <61036>; + voltage-tolerance = <5>; + operating-points = < + /* kHz */ + 166666 850000 + 400000 900000 + 800000 1050000 + 1000000 1200000 + 1200000 1300000 + >; }; }; -- cgit v1.2.3 From 9863aba5d6a8ceeab890e8593268fbe39c8d9562 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Sun, 28 Sep 2014 16:40:36 +0800 Subject: ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board Add enet2 support for imx6sx-sdb board, and add the "fsl,imx6q-fec" compatible for fec2 node to be compatible with the old version. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dts | 62 ++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6sx.dtsi | 2 +- 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 82d6b34527b7..448489be0076 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -105,6 +105,30 @@ gpio = <&gpio3 27 0>; enable-active-high; }; + + reg_peri_3v3: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; }; sound { @@ -133,6 +157,14 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_enet_3v3>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii"; status = "okay"; }; @@ -394,6 +426,30 @@ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + >; + }; + + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 >; }; @@ -452,6 +508,12 @@ >; }; + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 + >; + }; + pinctrl_pwm3: pwm3grp-1 { fsl,pins = < MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f3e88c03b1e4..422fc5acdd64 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -877,7 +877,7 @@ }; fec2: ethernet@021b4000 { - compatible = "fsl,imx6sx-fec"; + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x021b4000 0x4000>; interrupts = , ; -- cgit v1.2.3 From c3096cd4189bab5900e4723705cd0c3ee4d0f2e2 Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Mon, 27 Oct 2014 20:10:50 +0100 Subject: devicetree: bindings: Add vendor prefix for TBS Technologies TBS Technologies is a company which specializes in developing, producing and marketing of digital TV tuner cards for PCs. for additional details refer to http://www.tbsdtv.com/about-us.html Signed-off-by: Soeren Moch Acked-by: Rob Herring Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 723999d73744..776f4af2155d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -146,6 +146,7 @@ st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson synology Synology, Inc. +tbs TBS Technologies thine THine Electronics, Inc. ti Texas Instruments tlm Trusted Logic Mobility -- cgit v1.2.3 From 52bc34622e20b3a074de570e475e166e5d375e5b Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Mon, 27 Oct 2014 20:10:51 +0100 Subject: ARM: dts: add initial support for TBS2910 Matrix ARM mini PC TBS2910 is a i.MX6Q based board. For additional details refer to http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html Signed-off-by: Soeren Moch Reviewed-by: Sebastian Hesselbarth Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-tbs2910.dts | 429 ++++++++++++++++++++++++++++++++++++ 2 files changed, 430 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-tbs2910.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..3bc986cfc4ad 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -240,6 +240,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-tbs2910.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts new file mode 100644 index 000000000000..d2a5743faf24 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -0,0 +1,429 @@ +/* + * Copyright 2014 Soeren Moch + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include +#include + +/ { + model = "TBS2910 Matrix ARM mini PC"; + compatible = "tbs,imx6q-tbs2910", "fsl,imx6q"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x80000000>; + }; + + fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_fan>; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 3000 1>; + }; + + ir_recv { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + blue { + label = "blue_status_led"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5p0v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <3>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&audmux { + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + clocks = <&clks 201>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc: ds1307@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_5p0v>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + imx6q-tbs2910 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059 + >; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ir: irgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = ; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_fan { + pinctrl_gpio_fan: gpiofangrp { + fsl,pins = < + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1 + >; + }; + }; +}; -- cgit v1.2.3 From 225fc6d2817bcd086c1316fb84c9b706772daf7c Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 29 Oct 2014 16:36:30 +0200 Subject: ARM: dts: imx6dl: add alias for I2C4 bus On registration I2C bus drivers attemp to get ids from device tree aliases, add a missing alias for I2C4 found on iMX6 DualLite/Solo. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index b453e0e28aee..44d887656712 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -13,6 +13,10 @@ #include "imx6qdl.dtsi" / { + aliases { + i2c3 = &i2c4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 7239280cc299cb5fe526bf647f3ca168079cc55f Mon Sep 17 00:00:00 2001 From: Jingchang Lu Date: Fri, 31 Oct 2014 17:01:08 +0800 Subject: ARM: dts: Add SoC level device tree support for LS1021A This add Freescale QorIQ LS1021A SoC device tree support. The QorIQ LS1021A processor incorporates dual ARM Cortex-A7 cores, providing virtualization support, advanced security features and the broadest array of high-speed interconnects and optimized peripheral features. The LS1021A SoC shares IPs with i.MX, Vybrid and PowerPC platform. For the detail information about Freescale QorIQ LS1021A SoC, please refer to the QorIQ LS1021A Reference Manual. Signed-off-by: Nikhil Badola Signed-off-by: Chenhui Zhao Signed-off-by: Suresh Gupta Signed-off-by: Shaveta Leekha Signed-off-by: Ruchika Gupta Signed-off-by: Bhupesh Sharma Signed-off-by: Chao Fu Signed-off-by: Tang Yuantian Signed-off-by: Alison Wang Signed-off-by: Jingchang Lu Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 408 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 408 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a.dtsi diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi new file mode 100644 index 000000000000..657da14cb4b5 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -0,0 +1,408 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton64.dtsi" +#include + +/ { + compatible = "fsl,ls1021a"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; + serial4 = &lpuart4; + serial5 = &lpuart5; + sysclk = &sysclk; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + clocks = <&cluster1_clk>; + }; + + cpu@f01 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf01>; + clocks = <&cluster1_clk>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + ; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + device_type = "soc"; + interrupt-parent = <&gic>; + ranges; + + gic: interrupt-controller@1400000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1401000 0x0 0x1000>, + <0x0 0x1402000 0x0 0x1000>, + <0x0 0x1404000 0x0 0x2000>, + <0x0 0x1406000 0x0 0x2000>; + interrupts = ; + + }; + + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x1530000 0x0 0x10000>; + interrupts = ; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg", "syscon"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + big-endian; + }; + + esdhc: esdhc@1560000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x1560000 0x0 0x10000>; + interrupts = ; + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + bus-width = <4>; + status = "disabled"; + }; + + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + }; + + clockgen: clocking@1ee1000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1ee1000 0x10000>; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sysclk"; + }; + + cga_pll1: pll@800 { + compatible = "fsl,qoriq-core-pll-2.0"; + #clock-cells = <1>; + reg = <0x800 0x10>; + clocks = <&sysclk>; + clock-output-names = "cga-pll1", "cga-pll1-div2", + "cga-pll1-div4"; + }; + + platform_clk: pll@c00 { + compatible = "fsl,qoriq-core-pll-2.0"; + #clock-cells = <1>; + reg = <0xc00 0x10>; + clocks = <&sysclk>; + clock-output-names = "platform-clk", "platform-clk-div2"; + }; + + cluster1_clk: clk0c0@0 { + compatible = "fsl,qoriq-core-mux-2.0"; + #clock-cells = <0>; + reg = <0x0 0x10>; + clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; + clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; + clock-output-names = "cluster1-clk"; + }; + }; + + dspi0: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = ; + clock-names = "dspi"; + clocks = <&platform_clk 1>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + dspi1: dspi@2110000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = ; + clock-names = "dspi"; + clocks = <&platform_clk 1>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&platform_clk 1>; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&platform_clk 1>; + status = "disabled"; + }; + + i2c2: i2c@21a0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21a0000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&platform_clk 1>; + status = "disabled"; + }; + + uart0: serial@21c0500 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + interrupts = ; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart1: serial@21c0600 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + interrupts = ; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart2: serial@21d0500 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + interrupts = ; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart3: serial@21d0600 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + interrupts = ; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = ; + clocks = <&sysclk>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart1: serial@2960000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2960000 0x0 0x1000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@2970000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2970000 0x0 0x1000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart3: serial@2980000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2980000 0x0 0x1000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@2990000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2990000 0x0 0x1000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@29a0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x29a0000 0x0 0x1000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + wdog0: watchdog@2ad0000 { + compatible = "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "wdog-en"; + big-endian; + }; + + sai1: sai@2b50000 { + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b50000 0x0 0x10000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 47>, + <&edma0 1 46>; + big-endian; + status = "disabled"; + }; + + sai2: sai@2b60000 { + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b60000 0x0 0x10000>; + interrupts = ; + clocks = <&platform_clk 1>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 45>, + <&edma0 1 44>; + big-endian; + status = "disabled"; + }; + + edma0: edma@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&platform_clk 1>, + <&platform_clk 1>; + }; + + mdio0: mdio@2d24000 { + compatible = "gianfar"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d24000 0x0 0x4000>; + }; + + usb@8600000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + reg = <0x0 0x8600000 0x0 0x1000>; + interrupts = ; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + }; + }; +}; -- cgit v1.2.3 From 41de6f9812160d5ddc39158949a7bb78d455f828 Mon Sep 17 00:00:00 2001 From: Jingchang Lu Date: Fri, 31 Oct 2014 17:01:09 +0800 Subject: ARM: dts: Add initial LS1021A QDS board dts support The LS1021A QorIQ development system (QDS) is a high-performance computing evaluation, development and test platform supporting the LS1021A processor. The LS1021A QDS is optimized to support the high-bandwidth DDR3LP/DDR4 memory and a full complement of high-speed SerDes ports. For more detail information about the LS1021AQDS, please refer to the QorIQ LS1021A Development System Reference Manual. Signed-off-by: Alison Wang Signed-off-by: Chao Fu Signed-off-by: Jason Jin Signed-off-by: Xiubo Li Signed-off-by: Bhupesh Sharma Signed-off-by: Jaiprakash Singh Signed-off-by: Jingchang Lu Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ls1021a-qds.dts | 240 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 241 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3bc986cfc4ad..2737beae30e0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -251,6 +251,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ + ls1021a-qds.dtb \ vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts new file mode 100644 index 000000000000..9c5e16ba8c95 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -0,0 +1,240 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A QDS Board"; + + aliases { + enet0_rgmii_phy = &rgmii_phy1; + enet1_rgmii_phy = &rgmii_phy2; + enet2_rgmii_phy = &rgmii_phy3; + enet0_sgmii_phy = &sgmii_phy1c; + enet1_sgmii_phy = &sgmii_phy1d; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + dspiflash: at45db021d@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; + + pca9547: mux@77 { + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ds3232: rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = ; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + adt7461a@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000 + 0x2 0x0 0x0 0x7e800000 0x00010000 + 0x3 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0x3 0x0 0x0000100>; + bank-width = <1>; + device-width = <1>; + ranges = <0 3 0 0x100>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1[2:0] */ + + /* Onboard PHYs */ + ls1021amdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + ls1021amdio1: mdio@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + ls1021amdio2: mdio@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + ls1021amdio3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy1c: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + ls1021amdio4: mdio@80 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy1d: ethernet-phy@1d { + reg = <0x1d>; + }; + }; + }; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; -- cgit v1.2.3 From 034c4411f5f933ca716c9969ef590d578cb5f488 Mon Sep 17 00:00:00 2001 From: Jingchang Lu Date: Fri, 31 Oct 2014 17:01:10 +0800 Subject: ARM: dts: Add initial LS1021A TWR board dts support The LS1021A TWR is a low cost, high-performance evaluation, development and test platform supporting the LS1021A processor. It is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. For more detail information about the LS1021A TWR board, please refer to LS1021A QorIQ Tower System Reference Manual. Signed-off-by: Chao Fu Signed-off-by: Jingchang Lu Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ls1021a-twr.dts | 127 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 128 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-twr.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2737beae30e0..60773abcfb33 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -252,6 +252,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ ls1021a-qds.dtb \ + ls1021a-twr.dtb \ vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts new file mode 100644 index 000000000000..a2c591e2d918 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -0,0 +1,127 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A TWR Board"; + + aliases { + enet2_rgmii_phy = &rgmii_phy1; + enet0_sgmii_phy = &sgmii_phy2; + enet1_sgmii_phy = &sgmii_phy0; + }; +}; + +&dspi1 { + bus-num = <0>; + status = "okay"; + + dspiflash: s25fl064k@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl064k"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR Flash on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + sgmii_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; -- cgit v1.2.3 From 7e41a98dcc1b220c2c705f839ba76787c08858d3 Mon Sep 17 00:00:00 2001 From: Jingchang Lu Date: Fri, 31 Oct 2014 17:01:11 +0800 Subject: dt-bindings: arm: add Freescale LS1021A SoC device tree binding Signed-off-by: Jingchang Lu Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/arm/fsl.txt | 38 +++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index e935d7d4ac43..4e8b7df7fc62 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -74,3 +74,41 @@ Required root node properties: i.MX6q generic board Required root node properties: - compatible = "fsl,imx6q"; + + +Freescale LS1021A Platform Device Tree Bindings +------------------------------------------------ + +Required root node compatible properties: + - compatible = "fsl,ls1021a"; + +Freescale LS1021A SoC-specific Device Tree Bindings +------------------------------------------- + +Freescale SCFG + SCFG is the supplemental configuration unit, that provides SoC specific +configuration and status registers for the chip. Such as getting PEX port +status. + Required properties: + - compatible: should be "fsl,ls1021a-scfg" + - reg: should contain base address and length of SCFG memory-mapped registers + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg"; + reg = <0x0 0x1570000 0x0 0x10000>; + }; + +Freescale DCFG + DCFG is the device configuration unit, that provides general purpose +configuration and status for the device. Such as setting the secondary +core start address and release the secondary core from holdoff and startup. + Required properties: + - compatible: should be "fsl,ls1021a-dcfg" + - reg : should contain base address and length of DCFG memory-mapped registers + +Example: + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + }; -- cgit v1.2.3 From 3f3ebfb84aad46e3b49a41fe2ed9037835b2860e Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sun, 2 Nov 2014 21:36:44 +0100 Subject: ARM: dts: vf610: assign oscillator to clock module The clock controller module (CCM) has several clock inputs, which are connected to external crystal oscillators. To reflect this, assign these fixed clocks to the CCM node directly. This especially resolves initialization order dependencies we had with the earlier initialization code: When resolving of the fixed clocks failed in clk-vf610, the code created fixed clocks with a rate of 0. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- .../devicetree/bindings/clock/vf610-clock.txt | 15 +++++++++++++ arch/arm/boot/dts/vf610-cosmic.dts | 14 ++++++------ arch/arm/boot/dts/vf610-twr.dts | 25 ++++++++++++---------- arch/arm/boot/dts/vf610.dtsi | 25 ++++++++++------------ 4 files changed, 48 insertions(+), 31 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt index c80863d344ac..63f9f1ac3439 100644 --- a/Documentation/devicetree/bindings/clock/vf610-clock.txt +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -5,6 +5,19 @@ Required properties: - reg: Address and length of the register set - #clock-cells: Should be <1> +Optional properties: +- clocks: list of clock identifiers which are external input clocks to the + given clock controller. Please refer the next section to find + the input clocks for a given controller. +- clock-names: list of names of clocks which are exteral input clocks to the + given clock controller. + +Input clocks for top clock controller: + - sxosc (external crystal oscillator 32KHz, recommended) + - fxosc (external crystal oscillator 24MHz, recommended) + - audio_ext + - enet_ext + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h for the full list of VF610 clock IDs. @@ -15,6 +28,8 @@ clks: ccm@4006b000 { compatible = "fsl,vf610-ccm"; reg = <0x4006b000 0x1000>; #clock-cells = <1>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; }; uart1: serial@40028000 { diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index 3fd1b74e1216..b0ce8b8b2e0e 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -23,14 +23,16 @@ reg = <0x80000000 0x10000000>; }; - clocks { - enet_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; + enet_ext: enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; }; +}; +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>; + clock-names = "sxosc", "fxosc", "enet_ext"; }; &fec1 { diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 189b6975fe7d..7d06d1a367a5 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -22,18 +22,16 @@ reg = <0x80000000 0x8000000>; }; - clocks { - audio_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; + audio_ext: mclk_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; - enet_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; + enet_ext: eth_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; }; regulators { @@ -95,6 +93,11 @@ status = "okay"; }; +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; + clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; +}; + &dspi0 { bus-num = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 699da487222d..ed12d9a7be3e 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -44,21 +44,16 @@ }; }; - clocks { - #address-cells = <1>; - #size-cells = <0>; - - sxosc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + fxosc: fxosc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; - fxosc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; + sxosc: sxosc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; soc { @@ -358,6 +353,8 @@ clks: ccm@4006b000 { compatible = "fsl,vf610-ccm"; reg = <0x4006b000 0x1000>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; #clock-cells = <1>; }; -- cgit v1.2.3 From efb45b305fff1fe08bbd1e16591de71e7963cc58 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sun, 2 Nov 2014 21:36:46 +0100 Subject: ARM: dts: vf610: create generic base device trees This adds more generic base device trees for Vybrid SoCs. There are three series of Vybrid SoC commonly available: - VF3xx series: single core, Cortex-A5 without external memory - VF5xx series: single core, Cortex-A5 - VF6xx series: dual core, Cortex-A5/Cortex-M4 The second digit represents the presents of a L2 cache (VFx1x). The VF3xx series are not suitable for Linux especially since the internal memory is quite small (1.5MiB). The VF500 is essentially the base SoC, with only one core and without L1 cache. The VF610 is a superset of the VF500, hence vf500.dtsi is then included and enhanced by vf610.dtsi. There is no board using VF510 or VF600 currently, but, if needed, they can be added easily. The Linux kernel can also run on the Cortex-M4 CPU of Vybrid using !MMU support. This patchset creates a device tree structure which allows to share peripherals nodes for a VF6xx Cortex-M4 device tree too. The two CPU types have different views of the system: Foremost they are using different interrupt controllers, but also the memory map is slightly different. The base device tree vfxxx.dtsi allows to create SoC and board level device trees supporting the Cortex-M4 while reusing the shared peripherals nodes. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf500.dtsi | 171 ++++++++++++ arch/arm/boot/dts/vf610-colibri.dtsi | 12 + arch/arm/boot/dts/vf610-twr.dts | 12 + arch/arm/boot/dts/vf610.dtsi | 504 +---------------------------------- arch/arm/boot/dts/vfxxx.dtsi | 436 ++++++++++++++++++++++++++++++ 5 files changed, 643 insertions(+), 492 deletions(-) create mode 100644 arch/arm/boot/dts/vf500.dtsi create mode 100644 arch/arm/boot/dts/vfxxx.dtsi diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi new file mode 100644 index 000000000000..de6700542714 --- /dev/null +++ b/arch/arm/boot/dts/vf500.dtsi @@ -0,0 +1,171 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "skeleton.dtsi" +#include "vfxxx.dtsi" +#include + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a5_cpu: cpu@0 { + compatible = "arm,cortex-a5"; + device_type = "cpu"; + reg = <0x0>; + }; + }; + + soc { + interrupt-parent = <&intc>; + + aips-bus@40000000 { + + intc: interrupt-controller@40002000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x40003000 0x1000>, + <0x40002100 0x100>; + }; + + global_timer: timer@40002200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x40002200 0x20>; + interrupts = ; + clocks = <&clks VF610_CLK_PLATFORM_BUS>; + }; + }; + }; +}; + +&adc0 { + interrupts = ; +}; + +&adc1 { + interrupts = ; +}; + +&can0 { + interrupts = ; +}; + +&can1 { + interrupts = ; +}; + +&dspi0 { + interrupts = ; +}; + +&edma0 { + interrupts = , + ; + interrupt-names = "edma-tx", "edma-err"; +}; + +&edma1 { + interrupts = , + ; + interrupt-names = "edma-tx", "edma-err"; +}; + +&esdhc1 { + interrupts = ; +}; + +&fec0 { + interrupts = ; +}; + +&fec1 { + interrupts = ; +}; + +&ftm { + interrupts = ; +}; + +&gpio1 { + interrupts = ; +}; + +&gpio2 { + interrupts = ; +}; + +&gpio3 { + interrupts = ; +}; + +&gpio4 { + interrupts = ; +}; + +&gpio5 { + interrupts = ; +}; + +&i2c0 { + interrupts = ; +}; + +&pit { + interrupts = ; +}; + +&qspi0 { + interrupts = ; +}; + +&sai2 { + interrupts = ; +}; + +&uart0 { + interrupts = ; +}; + +&uart1 { + interrupts = ; +}; + +&uart2 { + interrupts = ; +}; + +&uart3 { + interrupts = ; +}; + +&uart4 { + interrupts = ; +}; + +&uart5 { + interrupts = ; +}; + +&usbdev0 { + interrupts = ; +}; + +&usbh1 { + interrupts = ; +}; + +&usbphy0 { + interrupts = ; +}; + +&usbphy1 { + interrupts = ; +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index eded7beecdae..2bcee5a54d42 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -40,6 +40,10 @@ status = "okay"; }; +&edma0 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -92,6 +96,14 @@ status = "okay"; }; +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + &iomuxc { vf610-colibri { pinctrl_esdhc1: esdhc1grp { diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 7d06d1a367a5..ebc906bf2a58 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -115,6 +115,10 @@ }; }; +&edma0 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -288,3 +292,11 @@ disable-over-current; status = "okay"; }; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index ed12d9a7be3e..5f8eb1bd782b 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -7,499 +7,19 @@ * (at your option) any later version. */ -#include "skeleton.dtsi" -#include "vf610-pinfunc.h" -#include -#include -#include +#include "vf500.dtsi" -/ { - aliases { - can0 = &can0; - can1 = &can1; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - usbphy0 = &usbphy0; - usbphy1 = &usbphy1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a5"; - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - }; - - fxosc: fxosc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - sxosc: sxosc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - aips0: aips-bus@40000000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - reg = <0x40000000 0x70000>; - ranges; - - intc: interrupt-controller@40002000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x40003000 0x1000>, - <0x40002100 0x100>; - }; - - global_timer: timer@40002200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x40002200 0x20>; - interrupts = ; - clocks = <&clks VF610_CLK_PLATFORM_BUS>; - }; - - L2: l2-cache@40006000 { - compatible = "arm,pl310-cache"; - reg = <0x40006000 0x1000>; - cache-unified; - cache-level = <2>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <2 2 2>; - }; - - edma0: dma-controller@40018000 { - #dma-cells = <2>; - compatible = "fsl,vf610-edma"; - reg = <0x40018000 0x2000>, - <0x40024000 0x1000>, - <0x40025000 0x1000>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, - <0 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; - dma-channels = <32>; - clock-names = "dmamux0", "dmamux1"; - clocks = <&clks VF610_CLK_DMAMUX0>, - <&clks VF610_CLK_DMAMUX1>; - }; - - can0: flexcan@40020000 { - compatible = "fsl,vf610-flexcan"; - reg = <0x40020000 0x4000>; - interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_FLEXCAN0>, - <&clks VF610_CLK_FLEXCAN0>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart0: serial@40027000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40027000 0x1000>; - interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART0>; - clock-names = "ipg"; - dmas = <&edma0 0 2>, - <&edma0 0 3>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - uart1: serial@40028000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40028000 0x1000>; - interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART1>; - clock-names = "ipg"; - dmas = <&edma0 0 4>, - <&edma0 0 5>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - uart2: serial@40029000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40029000 0x1000>; - interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART2>; - clock-names = "ipg"; - dmas = <&edma0 0 6>, - <&edma0 0 7>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - uart3: serial@4002a000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x4002a000 0x1000>; - interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART3>; - clock-names = "ipg"; - dmas = <&edma0 0 8>, - <&edma0 0 9>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - dspi0: dspi0@4002c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-dspi"; - reg = <0x4002c000 0x1000>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_DSPI0>; - clock-names = "dspi"; - spi-num-chipselects = <5>; - status = "disabled"; - }; - - sai2: sai@40031000 { - compatible = "fsl,vf610-sai"; - reg = <0x40031000 0x1000>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_SAI2>; - clock-names = "sai"; - dma-names = "tx", "rx"; - dmas = <&edma0 0 21>, - <&edma0 0 20>; - status = "disabled"; - }; - - pit: pit@40037000 { - compatible = "fsl,vf610-pit"; - reg = <0x40037000 0x1000>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_PIT>; - clock-names = "pit"; - }; - - pwm0: pwm@40038000 { - compatible = "fsl,vf610-ftm-pwm"; - #pwm-cells = <3>; - reg = <0x40038000 0x1000>; - clock-names = "ftm_sys", "ftm_ext", - "ftm_fix", "ftm_cnt_clk_en"; - clocks = <&clks VF610_CLK_FTM0>, - <&clks VF610_CLK_FTM0_EXT_SEL>, - <&clks VF610_CLK_FTM0_FIX_SEL>, - <&clks VF610_CLK_FTM0_EXT_FIX_EN>; - status = "disabled"; - }; - - pwm1: pwm@40039000 { - compatible = "fsl,vf610-ftm-pwm"; - #pwm-cells = <3>; - reg = <0x40039000 0x1000>; - clock-names = "ftm_sys", "ftm_ext", - "ftm_fix", "ftm_cnt_clk_en"; - clocks = <&clks VF610_CLK_FTM1>, - <&clks VF610_CLK_FTM1_EXT_SEL>, - <&clks VF610_CLK_FTM1_FIX_SEL>, - <&clks VF610_CLK_FTM1_EXT_FIX_EN>; - status = "disabled"; - }; - - adc0: adc@4003b000 { - compatible = "fsl,vf610-adc"; - reg = <0x4003b000 0x1000>; - interrupts = <0 53 0x04>; - clocks = <&clks VF610_CLK_ADC0>; - clock-names = "adc"; - status = "disabled"; - }; - - wdog@4003e000 { - compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; - reg = <0x4003e000 0x1000>; - clocks = <&clks VF610_CLK_WDT>; - clock-names = "wdog"; - }; - - qspi0: quadspi@40044000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-qspi"; - reg = <0x40044000 0x1000>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_QSPI0_EN>, - <&clks VF610_CLK_QSPI0>; - clock-names = "qspi_en", "qspi"; - status = "disabled"; - }; - - iomuxc: iomuxc@40048000 { - compatible = "fsl,vf610-iomuxc"; - reg = <0x40048000 0x1000>; - #gpio-range-cells = <3>; - }; - - gpio1: gpio@40049000 { - compatible = "fsl,vf610-gpio"; - reg = <0x40049000 0x1000 0x400ff000 0x40>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 0 32>; - }; - - gpio2: gpio@4004a000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004a000 0x1000 0x400ff040 0x40>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 32 32>; - }; - - gpio3: gpio@4004b000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004b000 0x1000 0x400ff080 0x40>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 64 32>; - }; - - gpio4: gpio@4004c000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 96 32>; - }; - - gpio5: gpio@4004d000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004d000 0x1000 0x400ff100 0x40>; - interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 128 7>; - }; - - anatop: anatop@40050000 { - compatible = "fsl,vf610-anatop", "syscon"; - reg = <0x40050000 0x400>; - }; - - usbphy0: usbphy@40050800 { - compatible = "fsl,vf610-usbphy"; - reg = <0x40050800 0x400>; - interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBPHY0>; - fsl,anatop = <&anatop>; - }; - - usbphy1: usbphy@40050c00 { - compatible = "fsl,vf610-usbphy"; - reg = <0x40050c00 0x400>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBPHY1>; - fsl,anatop = <&anatop>; - }; - - i2c0: i2c@40066000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-i2c"; - reg = <0x40066000 0x1000>; - interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_I2C0>; - clock-names = "ipg"; - dmas = <&edma0 0 50>, - <&edma0 0 51>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - clks: ccm@4006b000 { - compatible = "fsl,vf610-ccm"; - reg = <0x4006b000 0x1000>; - clocks = <&sxosc>, <&fxosc>; - clock-names = "sxosc", "fxosc"; - #clock-cells = <1>; - }; - - usbdev0: usb@40034000 { - compatible = "fsl,vf610-usb", "fsl,imx27-usb"; - reg = <0x40034000 0x800>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBC0>; - fsl,usbphy = <&usbphy0>; - fsl,usbmisc = <&usbmisc0 0>; - dr_mode = "peripheral"; - status = "disabled"; - }; - - usbmisc0: usb@40034800 { - #index-cells = <1>; - compatible = "fsl,vf610-usbmisc"; - reg = <0x40034800 0x200>; - clocks = <&clks VF610_CLK_USBC0>; - }; - }; - - aips1: aips-bus@40080000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40080000 0x80000>; - ranges; - - edma1: dma-controller@40098000 { - #dma-cells = <2>; - compatible = "fsl,vf610-edma"; - reg = <0x40098000 0x2000>, - <0x400a1000 0x1000>, - <0x400a2000 0x1000>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>, - <0 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; - dma-channels = <32>; - clock-names = "dmamux0", "dmamux1"; - clocks = <&clks VF610_CLK_DMAMUX2>, - <&clks VF610_CLK_DMAMUX3>; - }; - - uart4: serial@400a9000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x400a9000 0x1000>; - interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART4>; - clock-names = "ipg"; - status = "disabled"; - }; - - uart5: serial@400aa000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x400aa000 0x1000>; - interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART5>; - clock-names = "ipg"; - status = "disabled"; - }; - - adc1: adc@400bb000 { - compatible = "fsl,vf610-adc"; - reg = <0x400bb000 0x1000>; - interrupts = <0 54 0x04>; - clocks = <&clks VF610_CLK_ADC1>; - clock-names = "adc"; - status = "disabled"; - }; - - esdhc1: esdhc@400b2000 { - compatible = "fsl,imx53-esdhc"; - reg = <0x400b2000 0x1000>; - interrupts = <0 28 0x04>; - clocks = <&clks VF610_CLK_IPG_BUS>, - <&clks VF610_CLK_PLATFORM_BUS>, - <&clks VF610_CLK_ESDHC1>; - clock-names = "ipg", "ahb", "per"; - status = "disabled"; - }; - - usbh1: usb@400b4000 { - compatible = "fsl,vf610-usb", "fsl,imx27-usb"; - reg = <0x400b4000 0x800>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBC1>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc1 0>; - dr_mode = "host"; - status = "disabled"; - }; - - usbmisc1: usb@400b4800 { - #index-cells = <1>; - compatible = "fsl,vf610-usbmisc"; - reg = <0x400b4800 0x200>; - clocks = <&clks VF610_CLK_USBC1>; - }; - - ftm: ftm@400b8000 { - compatible = "fsl,ftm-timer"; - reg = <0x400b8000 0x1000 0x400b9000 0x1000>; - interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "ftm-evt", "ftm-src", - "ftm-evt-counter-en", "ftm-src-counter-en"; - clocks = <&clks VF610_CLK_FTM2>, - <&clks VF610_CLK_FTM3>, - <&clks VF610_CLK_FTM2_EXT_FIX_EN>, - <&clks VF610_CLK_FTM3_EXT_FIX_EN>; - status = "disabled"; - }; - - fec0: ethernet@400d0000 { - compatible = "fsl,mvf600-fec"; - reg = <0x400d0000 0x1000>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_ENET0>, - <&clks VF610_CLK_ENET0>, - <&clks VF610_CLK_ENET>; - clock-names = "ipg", "ahb", "ptp"; - status = "disabled"; - }; - - fec1: ethernet@400d1000 { - compatible = "fsl,mvf600-fec"; - reg = <0x400d1000 0x1000>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_ENET1>, - <&clks VF610_CLK_ENET1>, - <&clks VF610_CLK_ENET>; - clock-names = "ipg", "ahb", "ptp"; - status = "disabled"; - }; - - can1: flexcan@400d4000 { - compatible = "fsl,vf610-flexcan"; - reg = <0x400d4000 0x4000>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_FLEXCAN1>, - <&clks VF610_CLK_FLEXCAN1>; - clock-names = "ipg", "per"; - status = "disabled"; - }; +&a5_cpu { + next-level-cache = <&L2>; +}; - }; +&aips0 { + L2: l2-cache@40006000 { + compatible = "arm,pl310-cache"; + reg = <0x40006000 0x1000>; + cache-unified; + cache-level = <2>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; }; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi new file mode 100644 index 000000000000..4e70833b6dd8 --- /dev/null +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -0,0 +1,436 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "vf610-pinfunc.h" +#include +#include + +/ { + aliases { + can0 = &can0; + can1 = &can1; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + usbphy0 = &usbphy0; + usbphy1 = &usbphy1; + }; + + fxosc: fxosc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + sxosc: sxosc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + aips0: aips-bus@40000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + edma0: dma-controller@40018000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x40018000 0x2000>, + <0x40024000 0x1000>, + <0x40025000 0x1000>; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clks VF610_CLK_DMAMUX0>, + <&clks VF610_CLK_DMAMUX1>; + status = "disabled"; + }; + + can0: flexcan@40020000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x40020000 0x4000>; + clocks = <&clks VF610_CLK_FLEXCAN0>, + <&clks VF610_CLK_FLEXCAN0>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart0: serial@40027000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40027000 0x1000>; + clocks = <&clks VF610_CLK_UART0>; + clock-names = "ipg"; + dmas = <&edma0 0 2>, + <&edma0 0 3>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + uart1: serial@40028000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40028000 0x1000>; + clocks = <&clks VF610_CLK_UART1>; + clock-names = "ipg"; + dmas = <&edma0 0 4>, + <&edma0 0 5>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + uart2: serial@40029000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40029000 0x1000>; + clocks = <&clks VF610_CLK_UART2>; + clock-names = "ipg"; + dmas = <&edma0 0 6>, + <&edma0 0 7>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + uart3: serial@4002a000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x4002a000 0x1000>; + clocks = <&clks VF610_CLK_UART3>; + clock-names = "ipg"; + dmas = <&edma0 0 8>, + <&edma0 0 9>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + dspi0: dspi0@4002c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002c000 0x1000>; + clocks = <&clks VF610_CLK_DSPI0>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + status = "disabled"; + }; + + sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 21>, + <&edma0 0 20>; + status = "disabled"; + }; + + pit: pit@40037000 { + compatible = "fsl,vf610-pit"; + reg = <0x40037000 0x1000>; + clocks = <&clks VF610_CLK_PIT>; + clock-names = "pit"; + }; + + pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + + pwm1: pwm@40039000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40039000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM1>, + <&clks VF610_CLK_FTM1_EXT_SEL>, + <&clks VF610_CLK_FTM1_FIX_SEL>, + <&clks VF610_CLK_FTM1_EXT_FIX_EN>; + status = "disabled"; + }; + + adc0: adc@4003b000 { + compatible = "fsl,vf610-adc"; + reg = <0x4003b000 0x1000>; + clocks = <&clks VF610_CLK_ADC0>; + clock-names = "adc"; + status = "disabled"; + }; + + wdog@4003e000 { + compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; + reg = <0x4003e000 0x1000>; + clocks = <&clks VF610_CLK_WDT>; + clock-names = "wdog"; + status = "disabled"; + }; + + qspi0: quadspi@40044000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-qspi"; + reg = <0x40044000 0x1000>; + clocks = <&clks VF610_CLK_QSPI0_EN>, + <&clks VF610_CLK_QSPI0>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + iomuxc: iomuxc@40048000 { + compatible = "fsl,vf610-iomuxc"; + reg = <0x40048000 0x1000>; + #gpio-range-cells = <3>; + }; + + gpio1: gpio@40049000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40049000 0x1000 0x400ff000 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + + gpio2: gpio@4004a000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004a000 0x1000 0x400ff040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@4004b000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004b000 0x1000 0x400ff080 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@4004c000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio5: gpio@4004d000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004d000 0x1000 0x400ff100 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 128 7>; + }; + + anatop: anatop@40050000 { + compatible = "fsl,vf610-anatop", "syscon"; + reg = <0x40050000 0x400>; + }; + + usbphy0: usbphy@40050800 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050800 0x400>; + clocks = <&clks VF610_CLK_USBPHY0>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbphy1: usbphy@40050c00 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050c00 0x400>; + clocks = <&clks VF610_CLK_USBPHY1>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + i2c0: i2c@40066000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x40066000 0x1000>; + clocks = <&clks VF610_CLK_I2C0>; + clock-names = "ipg"; + dmas = <&edma0 0 50>, + <&edma0 0 51>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + clks: ccm@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; + #clock-cells = <1>; + }; + + usbdev0: usb@40034000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x40034000 0x800>; + clocks = <&clks VF610_CLK_USBC0>; + fsl,usbphy = <&usbphy0>; + fsl,usbmisc = <&usbmisc0 0>; + dr_mode = "peripheral"; + status = "disabled"; + }; + + usbmisc0: usb@40034800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x40034800 0x200>; + clocks = <&clks VF610_CLK_USBC0>; + status = "disabled"; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + edma1: dma-controller@40098000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x40098000 0x2000>, + <0x400a1000 0x1000>, + <0x400a2000 0x1000>; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clks VF610_CLK_DMAMUX2>, + <&clks VF610_CLK_DMAMUX3>; + status = "disabled"; + }; + + uart4: serial@400a9000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400a9000 0x1000>; + clocks = <&clks VF610_CLK_UART4>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart5: serial@400aa000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400aa000 0x1000>; + clocks = <&clks VF610_CLK_UART5>; + clock-names = "ipg"; + status = "disabled"; + }; + + adc1: adc@400bb000 { + compatible = "fsl,vf610-adc"; + reg = <0x400bb000 0x1000>; + clocks = <&clks VF610_CLK_ADC1>; + clock-names = "adc"; + status = "disabled"; + }; + + esdhc1: esdhc@400b2000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b2000 0x1000>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC1>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + usbh1: usb@400b4000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x400b4000 0x800>; + clocks = <&clks VF610_CLK_USBC1>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc1: usb@400b4800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x400b4800 0x200>; + clocks = <&clks VF610_CLK_USBC1>; + status = "disabled"; + }; + + ftm: ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + clock-names = "ftm-evt", "ftm-src", + "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, + <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, + <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + status = "disabled"; + }; + + fec0: ethernet@400d0000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d0000 0x1000>; + clocks = <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + fec1: ethernet@400d1000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d1000 0x1000>; + clocks = <&clks VF610_CLK_ENET1>, + <&clks VF610_CLK_ENET1>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + can1: flexcan@400d4000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x400d4000 0x4000>; + clocks = <&clks VF610_CLK_FLEXCAN1>, + <&clks VF610_CLK_FLEXCAN1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + }; + }; +}; -- cgit v1.2.3 From e1bf86ace4d2ac915e130699aefe6e9d9bc7164d Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sun, 2 Nov 2014 21:36:47 +0100 Subject: ARM: dts: vf500-colibri: add Colibri VF50 support Add Colibri VF50 device tree files vf500-colibri.dtsi and vf500-colibri-eval-v3.dts, in line with the Colibri VF61 device tree files. However, to minimize dupplication we also add vf-colibri.dtsi and vf-colibri-eval-v3.dtsi which contain the common device tree nodes. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 54 ++++++++++ arch/arm/boot/dts/vf-colibri.dtsi | 142 ++++++++++++++++++++++++++ arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 17 ++++ arch/arm/boot/dts/vf500-colibri.dtsi | 20 ++++ arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 47 +-------- arch/arm/boot/dts/vf610-colibri.dtsi | 149 +--------------------------- 7 files changed, 237 insertions(+), 193 deletions(-) create mode 100644 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi create mode 100644 arch/arm/boot/dts/vf-colibri.dtsi create mode 100644 arch/arm/boot/dts/vf500-colibri-eval-v3.dts create mode 100644 arch/arm/boot/dts/vf500-colibri.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 60773abcfb33..4600499089da 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -253,6 +253,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6sx-sdb.dtb \ ls1021a-qds.dtb \ ls1021a-twr.dtb \ + vf500-colibri-eval-v3.dtb \ vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..80e8fbc6b0aa --- /dev/null +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -0,0 +1,54 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + chosen { + bootargs = "console=ttyLP0,115200"; + }; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi new file mode 100644 index 000000000000..ab403679e6f3 --- /dev/null +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -0,0 +1,142 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 5000000 0>; + status = "disabled"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1182 + VF610_PAD_PTB1__FTM0_CH1 0x1182 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + VF610_PAD_PTB8__FTM1_CH0 0x1182 + VF610_PAD_PTB9__FTM1_CH1 0x1182 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts new file mode 100644 index 000000000000..7fc782c4fc52 --- /dev/null +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -0,0 +1,17 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf500-colibri.dtsi" +#include "vf-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri VF50 on Colibri Evaluation Board"; + compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; +}; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi new file mode 100644 index 000000000000..cee34a32f25b --- /dev/null +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -0,0 +1,20 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "vf500.dtsi" +#include "vf-colibri.dtsi" + +/ { + model = "Toradex Colibri VF50 COM"; + compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; + + memory { + reg = <0x80000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index 711cf823e794..10ebe99e2751 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -9,52 +9,9 @@ /dts-v1/; #include "vf610-colibri.dtsi" +#include "vf-colibri-eval-v3.dtsi" / { model = "Toradex Colibri VF61 on Colibri Evaluation Board"; compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; - - chosen { - bootargs = "console=ttyLP0,115200"; - }; -}; - -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - status = "okay"; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; - status = "okay"; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 2bcee5a54d42..19fe045b8334 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -8,6 +8,7 @@ */ #include "vf610.dtsi" +#include "vf-colibri.dtsi" / { model = "Toradex Colibri VF61 COM"; @@ -16,157 +17,9 @@ memory { reg = <0x80000000 0x10000000>; }; - - clocks { - enet_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; - }; - - bl: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 5000000 0>; - status = "disabled"; - }; -}; - -&adc0 { - status = "okay"; -}; - -&adc1 { - status = "okay"; -}; - -&edma0 { - status = "okay"; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; }; &L2 { arm,data-latency = <2 1 2>; arm,tag-latency = <3 2 3>; }; - -&pwm0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0>; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; -}; - -&usbdev0 { - disable-over-current; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - status = "okay"; -}; - -&usbphy0 { - status = "okay"; -}; - -&usbphy1 { - status = "okay"; -}; - -&iomuxc { - vf610-colibri { - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTB20__GPIO_42 0x219d - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; - - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1182 - VF610_PAD_PTB1__FTM0_CH1 0x1182 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - VF610_PAD_PTB8__FTM1_CH0 0x1182 - VF610_PAD_PTB9__FTM1_CH1 0x1182 - >; - }; - - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - VF610_PAD_PTD2__UART2_RTS 0x21a2 - VF610_PAD_PTD3__UART2_CTS 0x21a1 - >; - }; - }; -}; -- cgit v1.2.3 From d76fab80ef32a7421feb7b71b6e2fdddf3a036fd Mon Sep 17 00:00:00 2001 From: Dmitry Lavnikevich Date: Tue, 4 Nov 2014 16:05:47 +0300 Subject: ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Since pins and frequency are specific to module (pfla02), not base board (pbab02), it is better to be initialized in corresponding dts file. This patch fixes i2c2, i2c3 pin configuration which caused messages: imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c2grp imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c3grp imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp Signed-off-by: Dmitry Lavnikevich Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 22 ---------------------- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 26 ++++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 584721264121..f1bdcae5b97d 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -28,9 +28,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <100000>; status = "okay"; tlv320@18 { @@ -55,9 +52,6 @@ }; &i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clock-frequency = <100000>; status = "okay"; }; @@ -84,19 +78,3 @@ &usdhc3 { status = "okay"; }; - -&iomuxc { - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 0e50bb0a6b94..aa2275671d2c 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -162,6 +162,18 @@ }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -235,6 +247,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -- cgit v1.2.3 From 8fa91c8e55e58e673c21c809ca5d9fcb26da0141 Mon Sep 17 00:00:00 2001 From: Dmitry Lavnikevich Date: Tue, 4 Nov 2014 16:05:48 +0300 Subject: ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Audio on phyFLEX boards is presented by tlv320aic3007 codec connected over SSI interface. Signed-off-by: Dmitry Lavnikevich Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 101 ++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 15 ++++ 2 files changed, 114 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index f1bdcae5b97d..6b2c8922877d 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -9,10 +9,96 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + / { chosen { linux,stdout-path = &uart4; }; + + regulators { + sound_1v8: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + + tlv320_mclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "tlv320-mclk"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "OnboardTLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&tlv320_mclk>; + }; + }; + +}; + +&audmux { + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4)) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + 0x00000000 + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; }; &fec { @@ -30,9 +116,16 @@ &i2c2 { status = "okay"; - tlv320@18 { - compatible = "ti,tlv320aic3x"; + codec: tlv320@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; reg = <0x18>; + ai3x-micbias-vg = <2>; + + AVDD-supply = <&sound_3v3>; + IOVDD-supply = <&sound_3v3>; + DRVDD-supply = <&sound_3v3>; + DVDD-supply = <&sound_1v8>; }; stmpe@41 { @@ -55,6 +148,10 @@ status = "okay"; }; +&ssi2 { + status = "okay"; +}; + &uart3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index aa2275671d2c..ab3b1f9eec6e 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -58,6 +58,12 @@ }; }; +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "disabled"; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -319,6 +325,15 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 >; }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + >; + }; }; }; -- cgit v1.2.3 From 2b36bda3fbed64ad23e6f6b250912b57aeb1371f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 4 Nov 2014 14:07:08 +0100 Subject: ARM: dts: vf610: use new GPIO support Use GPIO support by adding SD card detection configuration and GPIO pinmux for Colibri's standard GPIO pins. Attach the GPIO pins to the iomuxc node to get the GPIO pin settings applied. Signed-off-by: Stefan Agner Acked-by: Linus Walleij Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf-colibri.dtsi | 9 +++++++++ arch/arm/boot/dts/vf610-twr.dts | 1 + arch/arm/boot/dts/vfxxx.dtsi | 1 + 3 files changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index ab403679e6f3..ab9616d7df90 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -31,6 +31,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; &fec1 { @@ -76,6 +77,14 @@ &iomuxc { vf610-colibri { + pinctrl_gpio_ext: gpio_ext { + fsl,pins = < + VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */ + VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */ + VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */ + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index ebc906bf2a58..793a376fa265 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -123,6 +123,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 4e70833b6dd8..505969ae8093 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -10,6 +10,7 @@ #include "vf610-pinfunc.h" #include #include +#include / { aliases { -- cgit v1.2.3 From ac039cd95b60d2ffa0e8c5e0d04534a9a2b761ad Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 4 Nov 2014 14:07:09 +0100 Subject: ARM: dts: vf610: enable USB misc/phy nodes where necessary Since restructuring of the device tree files, the USB misc/phy nodes are disabled by default. Hence we need to enable those explicitly when USB is used. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf-colibri.dtsi | 16 ++++++++++++++++ arch/arm/boot/dts/vf610-twr.dts | 8 ++++++++ 2 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index ab9616d7df90..237176008a38 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -75,6 +75,22 @@ status = "okay"; }; +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + &iomuxc { vf610-colibri { pinctrl_gpio_ext: gpio_ext { diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 793a376fa265..a0f762159cb2 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -294,6 +294,14 @@ status = "okay"; }; +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + &usbphy0 { status = "okay"; }; -- cgit v1.2.3 From 367415d338e4a48ead42f653c9e3e9171ebf00cc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 5 Nov 2014 10:12:51 -0200 Subject: ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property imx6q-tbs2910 board uses sgtl5000 codec and the machine file (imx-sgtl5000) already sets SSI in slave mode and codec in master mode, so there is no need for having this property. Signed-off-by: Fabio Estevam Tested-by: Soeren Moch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-tbs2910.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index d2a5743faf24..f7427bf452ba 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -215,7 +215,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; -- cgit v1.2.3 From a04a0b6fed4fd3ffdf0abd92686fca90bc3e5f38 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 11 Nov 2014 19:12:47 -0200 Subject: ARM: dts: imx6qdl: Enable CODA960 VPU This patch adds links to the on-chip SRAM and reset controller nodes and switches the interrupts. Make the BIT processor interrupt, which exists on all variants, the first one. The JPEG unit interrupt, which does not exist on i.MX27 and i.MX5 thus is an optional second interrupt. Use different compatible strings for i.MX6Q/D and i.MX6S/DL, as they have to load separate firmware images for some reason. Signed-off-by: Philipp Zabel Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl.dtsi | 4 ++++ arch/arm/boot/dts/imx6q.dtsi | 4 ++++ arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++++++ 3 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 44d887656712..1ac2fe732867 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -118,3 +118,7 @@ "di0_sel", "di1_sel", "di0", "di1"; }; + +&vpu { + compatible = "fsl,imx6dl-vpu", "cnm,coda960"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e9f3646d1760..85f72e6b5bad 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -308,3 +308,7 @@ }; }; }; + +&vpu { + compatible = "fsl,imx6q-vpu", "cnm,coda960"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 9596ed5867e6..e529308811e6 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -333,9 +333,17 @@ }; vpu: vpu@02040000 { + compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, <0 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bit", "jpeg"; + clocks = <&clks IMX6QDL_CLK_VPU_AXI>, + <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, + <&clks IMX6QDL_CLK_OCRAM>; + clock-names = "per", "ahb", "ocram"; + resets = <&src 1>; + iram = <&ocram>; }; aipstz@0207c000 { /* AIPSTZ1 */ -- cgit v1.2.3 From 1ddeb484b18eecbb992b26c742ef1e5118b1a9f0 Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Thu, 13 Nov 2014 10:05:31 +0530 Subject: ARM: dts: vf-colibri: Add I2C support Acked-by: Stefan Agner Signed-off-by: Bhuvanchandra DV Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 6 +++++- arch/arm/boot/dts/vf-colibri.dtsi | 13 +++++++++++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 80e8fbc6b0aa..7324bdcf06f2 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -33,6 +33,10 @@ status = "okay"; }; +&i2c0 { + status = "okay"; +}; + &pwm0 { status = "okay"; }; @@ -51,4 +55,4 @@ &uart2 { status = "okay"; -}; \ No newline at end of file +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 237176008a38..43e7539daf5c 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -40,6 +40,12 @@ pinctrl-0 = <&pinctrl_fec1>; }; +&i2c0 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; @@ -127,6 +133,13 @@ >; }; + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1182 -- cgit v1.2.3 From 2149b95f1af1503dc8377531a83065892d669cc2 Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Thu, 13 Nov 2014 10:05:32 +0530 Subject: ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC ST-M41T0M6 is available on Colibri carrier boards. Hence enable M41T0M6 RTC. Acked-by: Stefan Agner Signed-off-by: Bhuvanchandra DV Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 7324bdcf06f2..20251a3ea813 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -35,6 +35,12 @@ &i2c0 { status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; }; &pwm0 { -- cgit v1.2.3 From 350088320b80f2d87a29798458f9db1c3b206ca9 Mon Sep 17 00:00:00 2001 From: Christian Hemp Date: Fri, 14 Nov 2014 14:32:22 +0100 Subject: ARM: dts: imx6: phyFLEX: set nodes in alphabetical order The gmpi and fec node were not in alphabatical order. Signed-off-by: Christian Hemp Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 32 ++++++++++++++-------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index ab3b1f9eec6e..585b823eb0e0 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -78,6 +78,22 @@ }; }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + phy-supply = <&vdd_eth_io_reg>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -337,22 +353,6 @@ }; }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; - phy-supply = <&vdd_eth_io_reg>; - status = "disabled"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; - status = "disabled"; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; -- cgit v1.2.3 From 0019d18213924a9cd10fda59e2c8b83ece54fd58 Mon Sep 17 00:00:00 2001 From: Christian Hemp Date: Fri, 14 Nov 2014 14:32:23 +0100 Subject: ARM: dts: imx6: phyFLEX: Enable gpmi in module file The nand is on the module (PFL-A-02) and not on the baseboard (PBA-B-01). Signed-off-by: Christian Hemp Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 4 ---- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 6b2c8922877d..111b1f5021b9 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -105,10 +105,6 @@ status = "okay"; }; -&gpmi { - status = "okay"; -}; - &hdmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 585b823eb0e0..af3065336969 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -91,7 +91,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; nand-on-flash-bbt; - status = "disabled"; + status = "okay"; }; &i2c1 { -- cgit v1.2.3 From c082fd422e66df8e2492e27219192a773ccb72e5 Mon Sep 17 00:00:00 2001 From: Christian Hemp Date: Fri, 14 Nov 2014 14:32:24 +0100 Subject: ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic The PMIC interrupt was changed from modul revision 1 to 2. Revision 1 was declared as a prototype and is not in series by any customers. Signed-off-by: Christian Hemp Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index af3065336969..8d718b55a07f 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -107,8 +107,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ + interrupt-parent = <&gpio2>; + interrupts = <9 0x8>; /* active-low GPIO2_9 */ regulators { vddcore_reg: bcore1 { @@ -205,7 +205,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ >; -- cgit v1.2.3 From 9924546b29f5f20d0596ebc76ab1ddc1f716cae4 Mon Sep 17 00:00:00 2001 From: Christian Hemp Date: Fri, 14 Nov 2014 14:32:25 +0100 Subject: ARM: dts: imx6: phyFLEX: Add PCIe Add PCIe support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01). Signed-off-by: Christian Hemp Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 4 ++++ arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 111b1f5021b9..7634cc1c9436 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -144,6 +144,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 8d718b55a07f..2d721095a369 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -283,6 +283,10 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = ; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -353,6 +357,13 @@ }; }; +&pcie { + pinctrl-name = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 17 0>; + status = "disabled"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; -- cgit v1.2.3 From 1b61feea3f65fd401a778d705c7223e9f7da529f Mon Sep 17 00:00:00 2001 From: Christian Hemp Date: Fri, 14 Nov 2014 14:32:26 +0100 Subject: ARM: dts: imx6: phyFLEX: Add CAN support Add CAN support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01). Signed-off-by: Christian Hemp Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 4 ++++ arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 13 +++++++++++++ 2 files changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 7634cc1c9436..585b4f6986c1 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -101,6 +101,10 @@ }; }; +&can1 { + status = "okay"; +}; + &fec { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 2d721095a369..19cc269a08d4 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -64,6 +64,12 @@ status = "disabled"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -240,6 +246,13 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + >; + }; + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -- cgit v1.2.3 From 505251e504e163f2e2f5c75e9b42cbcd62b792e7 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sun, 16 Nov 2014 19:00:28 +0100 Subject: ARM: dts: vf-colibri: add USB regulators Add structure of USB supply logic. The USB hosts power enable regulator is needed to control VBUS supply on the Colibri carrier board. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 32 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/vf-colibri.dtsi | 6 ++++++ 2 files changed, 38 insertions(+) diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 20251a3ea813..56a452bc326c 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -11,6 +11,34 @@ chosen { bootargs = "console=ttyLP0,115200"; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* USBH_PEN */ + usbh_vbus_reg: regulator@1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + reg = <1>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; + vin-supply = <&sys_5v0_reg>; + }; + }; }; &bl { @@ -62,3 +90,7 @@ &uart2 { status = "okay"; }; + +&usbh1 { + vbus-supply = <&usbh_vbus_reg>; +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 43e7539daf5c..82f5728be5c9 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -176,5 +176,11 @@ VF610_PAD_PTD3__UART2_CTS 0x21a1 >; }; + + pinctrl_usbh1_reg: gpio_usb_vbus { + fsl,pins = < + VF610_PAD_PTD4__GPIO_83 0x22ed + >; + }; }; }; -- cgit v1.2.3 From 422b06769eacdf068142afc4d69e1e0a591a19d7 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Wed, 12 Nov 2014 16:20:37 +0800 Subject: ARM: dts: imx6: add pm_power_off support for i.mx6 chips All chips of i.mx6 can be powered off by programming SNVS. For example : On i.mx6q-sabresd board, PMIC_ON_REQ connect with external pmic ON/OFF pin, that will cause the whole PMIC powered off except VSNVS. And system can restart once PMIC_ON_REQ goes high by push POWRER key. Signed-off-by: Robin Gong Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 ++++ arch/arm/boot/dts/imx6qdl.dtsi | 6 ++++++ arch/arm/boot/dts/imx6sl-evk.dts | 4 ++++ arch/arm/boot/dts/imx6sl.dtsi | 6 ++++++ arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++++ arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++ 6 files changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index baf2f00d519a..05f5ff75c0ea 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -531,6 +531,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e529308811e6..4fc03b7f1cee 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -665,6 +665,12 @@ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; + + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + status = "disabled"; + }; }; epit1: epit@020d0000 { /* EPIT1 */ diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 898d14fd765f..fda4932faefd 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -580,6 +580,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index dfd83e6d8087..36ab8e054cee 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -574,6 +574,12 @@ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; + + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + status = "disabled"; + }; }; epit1: epit@020d0000 { diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 448489be0076..1e6e5cc1c14c 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -336,6 +336,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 422fc5acdd64..7a24fee1e7ae 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -671,6 +671,12 @@ reg = <0x34 0x58>; interrupts = , ; }; + + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + status = "disabled"; + }; }; epit1: epit@020d0000 { -- cgit v1.2.3 From 96acf9dfe1ba59e99eafcf26478118edd195d924 Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Wed, 19 Nov 2014 07:54:49 +0100 Subject: ARM: dts: imx6q-tbs2910: Enable snvs-poweroff This patch enables snvs-poweroff for TBS2910 boards. Signed-off-by: Soeren Moch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-tbs2910.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index f7427bf452ba..a43abfa21e33 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -208,6 +208,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdif>; -- cgit v1.2.3 From 2dad53b54afdcab06a0a404158729ba98ab17dd6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:04 +0200 Subject: ARM: dts: sun7i: Add spi0_pins_a pinctrl setting Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 82097c905c48..4fb893080722 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -784,6 +784,13 @@ allwinner,pull = <0>; }; + spi0_pins_a: spi0@0 { + allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; + allwinner,function = "spi0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + spi1_pins_a: spi1@0 { allwinner,pins = "PI16", "PI17", "PI18", "PI19"; allwinner,function = "spi1"; -- cgit v1.2.3 From 0510e4b52a2e8a21c514403d24af4f253020c8dd Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:05 +0200 Subject: ARM: dts: sun7i: Add uart3_pins_b pinctrl setting The uart3_pins_a multiplexes the uart3 pins to port G, add a pinctrl entry for mapping them to port H (as used on the Bananapi). Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4fb893080722..cecf32ce9ade 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -677,6 +677,13 @@ allwinner,pull = <0>; }; + uart3_pins_b: uart3@1 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart4_pins_a: uart4@0 { allwinner,pins = "PG10", "PG11"; allwinner,function = "uart4"; -- cgit v1.2.3 From 0750693e1c32ac8c86c62e506ac59cf42ca8a736 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:06 +0200 Subject: ARM: dts: sun7i: Add Banana Pi board The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expenansion headers: http://www.lemaker.org/ Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++ 2 files changed, 215 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..63422bde3a46 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -435,6 +435,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-hummingbird.dtb \ sun6i-a31-m9.dtb dtb-$(CONFIG_MACH_SUN7I) += \ + sun7i-a20-bananapi.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts new file mode 100644 index 000000000000..0e7c9f552b58 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -0,0 +1,214 @@ +/* + * Copyright 2014 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "LeMaker Banana Pi"; + compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; + + soc@01c00000 { + spi0: spi@01c05000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; + }; + + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 0>; /* PH10 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + gmac_power_pin_bananapi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_bananapi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; + }; + + uart7: serial@01c29c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapi>; + + green { + label = "bananapi:green:usr"; + gpios = <&pio 7 24 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&pio 7 23 0>; + }; +}; -- cgit v1.2.3 From 8fa8232629e19deca89f2d170caf829edf1899a8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 16:25:36 +0200 Subject: ARM: dts: sun7i: Add mmc2_pins_a pinctrl definition Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index cecf32ce9ade..f0a75c6523a1 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -833,6 +833,13 @@ allwinner,pull = <1>; }; + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <2>; + allwinner,pull = <1>; + }; + mmc3_pins_a: mmc3@0 { allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; allwinner,function = "mmc3"; -- cgit v1.2.3 From d5b134df405e760bb1dd5c90452c98a25b33c62c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 16:25:37 +0200 Subject: ARM: dts: sun7i: Add Mele M3 board The Mele M3 is yet another Allwinnner based Android top set box from Mele. It uses a housing similar to the A2000, but without the USM sata storage slot at the top. It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-m3.dts | 168 +++++++++++++++++++++++++++++++++++++ 2 files changed, 169 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-m3.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 63422bde3a46..86669feaeac0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -440,6 +440,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-m3.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts new file mode 100644 index 000000000000..ce071417e029 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -0,0 +1,168 @@ +/* + * Copyright 2014 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Mele M3"; + compatible = "mele,m3", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc2: mmc@01c11000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + led_pins_m3: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m3>; + + blue { + label = "m3:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; +}; -- cgit v1.2.3 From 518478811c95fafcbef64cf20172a3d6c8dceb27 Mon Sep 17 00:00:00 2001 From: Iain Paton Date: Fri, 10 Oct 2014 14:15:24 +0100 Subject: ARM: sun7i: add support for A20-OLinuXino-Lime2 This adds support for the Olimex A20-OLinuXino-Lime2 https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2 Differences to previous Lime boards are 1GB RAM and gigabit ethernet Signed-off-by: Iain Paton Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 228 ++++++++++++++++++++++++ 2 files changed, 229 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 86669feaeac0..a84668ab774c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -442,6 +442,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts new file mode 100644 index 000000000000..187729a0b7d8 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -0,0 +1,228 @@ +/* + * Copyright 2014 - Iain Paton + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Olimex A20-OLinuXino-LIME2"; + compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <®_axp_ipsout>; + vin2-supply = <®_axp_ipsout>; + vin3-supply = <®_axp_ipsout>; + ldo24in-supply = <®_axp_ipsout>; + ldo3in-supply = <®_axp_ipsout>; + + regulators { + vdd_rtc: ldo1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + avcc: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_csi0: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + vcc_csi1: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_cpu: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; + + vdd_int: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + }; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a20-olinuxino-lime2:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 0>; + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_axp_ipsout: axp_ipsout { + compatible = "regulator-fixed"; + regulator-name = "axp-ipsout"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; -- cgit v1.2.3 From 2272940e96b5f77a98661af3612a8ca8d061a476 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 8 Oct 2014 21:02:53 +0800 Subject: ARM: dts: sunxi: Add Allwinner A80 dtsi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Allwinner A80 is a new multi-purpose SoC with 4 Cortex-A7 and 4 Cortex-A15 cores in a big.LITTLE architecture, and a 64-core PowerVR G6230 GPU. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Andreas Färber --- arch/arm/boot/dts/sun9i-a80.dtsi | 257 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100644 arch/arm/boot/dts/sun9i-a80.dtsi diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi new file mode 100644 index 000000000000..5e2ec4b71f5b --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -0,0 +1,257 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &r_uart; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x3>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + memory { + /* 8GB max. with LPAE */ + reg = <0 0x20000000 0x02 0>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + /* + * map 64 bit address range down to 32 bits, + * as the peripherals are all under 512MB. + */ + ranges = <0 0 0 0x20000000>; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* + * map 64 bit address range down to 32 bits, + * as the peripherals are all under 512MB. + */ + ranges = <0 0 0 0x20000000>; + + gic: interrupt-controller@01c41000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c41000 0x1000>, + <0x01c42000 0x1000>, + <0x01c44000 0x2000>, + <0x01c46000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + + timer@06000c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x06000c00 0xa0>; + interrupts = <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>, + <0 23 4>; + + clocks = <&osc24M>; + }; + + uart0: serial@07000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000000 0x400>; + interrupts = <0 0 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart1: serial@07000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000400 0x400>; + interrupts = <0 1 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart2: serial@07000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000800 0x400>; + interrupts = <0 2 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart3: serial@07000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000c00 0x400>; + interrupts = <0 3 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart4: serial@07001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07001000 0x400>; + interrupts = <0 4 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart5: serial@07001400 { + compatible = "snps,dw-apb-uart"; + reg = <0x07001400 0x400>; + interrupts = <0 5 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + r_wdt: watchdog@08001000 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x08001000 0x20>; + interrupts = <0 36 4>; + }; + + r_uart: serial@08002800 { + compatible = "snps,dw-apb-uart"; + reg = <0x08002800 0x400>; + interrupts = <0 38 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3 From 57bf43bbe9ae1f4d6f7860f472eadbecb83a93bd Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 8 Oct 2014 21:02:54 +0800 Subject: ARM: dts: sun9i: Add A80 Optimus Board support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The A80 Optimus Board is was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash, 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. This patch adds only basic support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Andreas Färber --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a84668ab774c..766a35b2bc54 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -447,6 +447,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb +dtb-$(CONFIG_MACH_SUN9I) += \ + sun9i-a80-optimus.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts new file mode 100644 index 000000000000..f83abab108b9 --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun9i-a80.dtsi" + +/ { + model = "Merrii A80 Optimus Board"; + compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: serial@07000000 { + status = "okay"; + }; + }; +}; -- cgit v1.2.3 From a0b3875517e9b3f80ba7c4226b7f1c3525c0d933 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sunxi: regulators: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Acked-by: Hans de Goede --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index c9c5b10e03eb..fa69adfea7fc 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -3,12 +3,48 @@ * * Copyright 2014 - Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ / { -- cgit v1.2.3 From 101d78b00389f472b5b14fcb20b57549d7d1dc96 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: ba10: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 1763cc7ec023..f3f2974658e4 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From b0760ae57b39f7c8d07ac7ae5d55e4c7aa5f7dee Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: hackberry: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 891ea446abae..efc116287e0f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From a829a6dcb3d3c13add59f8f3fba3297ba1dd8a15 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: inet97fv2: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: David Lanzendörfer Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 6b0c37812ade..3e25ee4d3248 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -3,12 +3,48 @@ * * David Lanzendörfer * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From c3c968e4973b8c214c017d0799d7357b740cdb6f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: mini xplus: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index b9ecce60f2e7..8b3f97470249 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 08ab56f0a0edf8f93fcd6c82a919bf89023f1d0e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: olinuxino lime: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index d046d568f5a1..88cf1a531155 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 - Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 9a14a995dbef0af7b3127e7b5732c27918831133 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Emilio López Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 46 +++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index ea9519da5764..fe3c559ca6a8 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From bf35c1fece831a2abecf969df1cc11a6eab21a69 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: r7: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts | 46 ++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 43a93762d4f2..1fa2916eafc2 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From bc1684c8181562b11e8c00297ef4f9e207e50540 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 48 +++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index fa44b026483b..916ee8bb826f 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -1,15 +1,49 @@ /* - * Copyright 2012 Maxime Ripard + * Copyright 2012 Maxime Ripard * Copyright 2013 Hans de Goede * - * Maxime Ripard + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 3f55b068386a714b93bf0a9ffa1180b62fae2c30 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:38 +0200 Subject: ARM: sun6i: colombus: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 46 ++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 546cf6eff5c7..c36b4dc89c13 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 1fe8efe9595467b5b5d85b0f7f170bcabf7d056e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:39 +0200 Subject: ARM: sun6i: hummingbird: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 46 +++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index f142065b3c1f..6e924d9d2912 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 1bd00bb1a4315a6db7b1e7f283bd030db70cab22 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun6i: m9: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun6i-a31-m9.dts | 46 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index bc6115da5ae1..c887be6cea3d 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 75717e17c1c336083dc71d61bcff0cfd374cf30d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: i12: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 6a67712d417a..f38bb1a6656c 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 27b22e19f7ff2e14a3475074900e77b9722c325a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun8i: q8h: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 46 +++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index e9b8cca8dcc1..7f2117ce6985 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -3,12 +3,48 @@ * * Chen-Yu Tsai * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 7973b1d7bf0c7ff26677863da55eef12196db61c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 20 Oct 2014 22:10:30 +0800 Subject: ARM: dts: sun9i: Add basic clocks and reset controls Now that we have driver support for the basic clocks, add them to the dtsi and update existing peripherals. Also add reset controls to match. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 177 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 171 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 5e2ec4b71f5b..7bcab5685d0e 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -142,6 +142,135 @@ clock-frequency = <32768>; clock-output-names = "osc32k"; }; + + pll4: clk@0600000c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600000c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll12: clk@0600002c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600002c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll12"; + }; + + gt_clk: clk@0600005c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x0600005c 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "gt"; + }; + + ahb0: clk@06000060 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000060 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb0"; + }; + + ahb1: clk@06000064 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000064 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb1"; + }; + + ahb2: clk@06000068 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000068 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb2"; + }; + + apb0: clk@06000070 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb0-clk"; + reg = <0x06000070 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb0"; + }; + + apb1: clk@06000074 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb1-clk"; + reg = <0x06000074 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb1"; + }; + + cci400_clk: clk@06000078 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x06000078 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "cci400"; + }; + + ahb0_gates: clk@06000580 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; + reg = <0x06000580 0x4>; + clocks = <&ahb0>; + clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", + "ahb0_ss", "ahb0_sd", "ahb0_nand1", + "ahb0_nand0", "ahb0_sdram", + "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", + "ahb0_spi0","ahb0_spi1", "ahb0_spi2", + "ahb0_spi3"; + }; + + ahb1_gates: clk@06000584 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; + reg = <0x06000584 0x4>; + clocks = <&ahb1>; + clock-output-names = "ahb1_usbotg", "ahb1_usbhci", + "ahb1_gmac", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_hstimer", + "ahb1_dma"; + }; + + ahb2_gates: clk@06000588 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; + reg = <0x06000588 0x4>; + clocks = <&ahb2>; + clock-output-names = "ahb2_lcd0", "ahb2_lcd1", + "ahb2_edp", "ahb2_csi", "ahb2_hdmi", + "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; + }; + + apb0_gates: clk@06000590 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-apb0-gates-clk"; + reg = <0x06000590 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_spdif", "apb0_pio", + "apb0_ac97", "apb0_i2s0", "apb0_i2s1", + "apb0_lradc", "apb0_gpadc", "apb0_twd", + "apb0_cirtx"; + }; + + apb1_gates: clk@06000594 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-apb1-gates-clk"; + reg = <0x06000594 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", + "apb1_uart0", "apb1_uart1", + "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5"; + }; }; soc { @@ -165,6 +294,36 @@ interrupts = <1 9 0xf04>; }; + ahb0_resets: reset@060005a0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a0 0x4>; + }; + + ahb1_resets: reset@060005a4 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a4 0x4>; + }; + + ahb2_resets: reset@060005a8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a8 0x4>; + }; + + apb0_resets: reset@060005b0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005b0 0x4>; + }; + + apb1_resets: reset@060005b4 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005b4 0x4>; + }; + timer@06000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; @@ -184,7 +343,8 @@ interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 16>; + resets = <&apb1_resets 16>; status = "disabled"; }; @@ -194,7 +354,8 @@ interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 17>; + resets = <&apb1_resets 17>; status = "disabled"; }; @@ -204,7 +365,8 @@ interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 18>; + resets = <&apb1_resets 18>; status = "disabled"; }; @@ -214,7 +376,8 @@ interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 19>; + resets = <&apb1_resets 19>; status = "disabled"; }; @@ -224,7 +387,8 @@ interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 20>; + resets = <&apb1_resets 20>; status = "disabled"; }; @@ -234,7 +398,8 @@ interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 21>; + resets = <&apb1_resets 21>; status = "disabled"; }; -- cgit v1.2.3 From 66e0c58bbb964b53f68d60b7b390a1684be219f0 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:37 +0200 Subject: ARM: sun6i: app4: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Boris BREZILLON --- arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 2bbf8867362b..c74a63a39531 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -3,12 +3,48 @@ * * Boris Brezillon * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 5186d83a299cf884d9b07cd864a7165cb804171f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:23 +0200 Subject: ARM: sunxi: Fix GPLv2 wording During the GPL to GPL/X11 licensing migration, the GPL notice introduced mentionned the device trees as a library, which is not really accurate. It began to spread by copy and paste. Fix all these library mentions to reflect the file that it's actually just a file. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 6 +++--- arch/arm/boot/dts/sun6i-a31.dtsi | 6 +++--- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 6 +++--- arch/arm/boot/dts/sun7i-a20-m3.dts | 6 +++--- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 6 +++--- arch/arm/boot/dts/sun7i-a20.dtsi | 6 +++--- arch/arm/boot/dts/sun8i-a23.dtsi | 6 +++--- arch/arm/boot/dts/sun9i-a80-optimus.dts | 6 +++--- arch/arm/boot/dts/sun9i-a80.dtsi | 6 +++--- 9 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 8b3cd0907b32..eeed1f236ee8 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -6,18 +6,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 2e652e2339e9..4c4792fea0b7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 0e7c9f552b58..3de847db7e76 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index ce071417e029..b8e568c55271 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 187729a0b7d8..ed364d5e755e 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -6,18 +6,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f0a75c6523a1..45bb9162f5c7 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 6146ef15efbe..6086adbf9d74 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index f83abab108b9..3a70fdf8877e 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 7bcab5685d0e..af508e5af0f5 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -8,18 +8,18 @@ * licensing only applies to this file, and not this project as a * whole. * - * a) This library is free software; you can redistribute it and/or + * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free + * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * -- cgit v1.2.3 From e85dbb2956e9be7e74aa4a52e66a91f3e756577b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: a1000: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Emilio López Acked-by: Hans de Goede Acked-by: Olliver Schinagl Acked-by: Roman Byshko --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 46 +++++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 9e99ade35e37..3bcfd81837f0 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -3,12 +3,48 @@ * * Emilio López * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 51be8c81fe9f72aebdcc25b297b1ac2000283a3f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Oct 2014 22:41:28 +0100 Subject: ARM: sun9i: Enable the A80 pinctrl driver The A80 pinctrl driver is just as usual our pinctrl/gpio/external interrupt controller. Nothing really out of the extraordinary here... Signed-off-by: Maxime Ripard Acked-by: Linus Walleij --- arch/arm/boot/dts/sun9i-a80.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index af508e5af0f5..fe9832a2d8b8 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -337,6 +337,22 @@ clocks = <&osc24M>; }; + pio: pinctrl@06000800 { + compatible = "allwinner,sun9i-a80-pinctrl"; + reg = <0x06000800 0x400>; + interrupts = <0 11 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>, + <0 120 4>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #gpio-cells = <3>; + }; + uart0: serial@07000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; -- cgit v1.2.3 From b8d2fef2706e04c3df1dd49d3a7f0b5626fe763c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Oct 2014 22:41:29 +0100 Subject: ARM: sun9i: optimus: Set UART0 muxing Enable the UART0 muxing, as set up by the bootloader. Signed-off-by: Maxime Ripard Acked-by: Linus Walleij --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 ++ arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 3a70fdf8877e..5d9bc80afef2 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -60,6 +60,8 @@ soc { uart0: serial@07000000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index fe9832a2d8b8..da680cf195e2 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -351,6 +351,13 @@ #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@07000000 { -- cgit v1.2.3 From 6023ebca9c1c2ea847405f4ddb81cdeeeac249df Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:46 +0800 Subject: ARM: dts: sun9i: Add i2c controller nodes to a80 dtsi The A80 has 5 i2c controllers in the main processor block. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index da680cf195e2..3ec727d76d1b 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -426,6 +426,61 @@ status = "disabled"; }; + i2c0: i2c@07002800 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07002800 0x400>; + interrupts = <0 6 4>; + clocks = <&apb1_gates 0>; + resets = <&apb1_resets 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@07002c00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07002c00 0x400>; + interrupts = <0 7 4>; + clocks = <&apb1_gates 1>; + resets = <&apb1_resets 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@07003000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07003000 0x400>; + interrupts = <0 8 4>; + clocks = <&apb1_gates 2>; + resets = <&apb1_resets 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@07003400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07003400 0x400>; + interrupts = <0 9 4>; + clocks = <&apb1_gates 3>; + resets = <&apb1_resets 3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@07003800 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07003800 0x400>; + interrupts = <0 10 4>; + clocks = <&apb1_gates 4>; + resets = <&apb1_resets 4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_wdt: watchdog@08001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; -- cgit v1.2.3 From 18b6645ad8d0e45abde3366c223fed3219df168d Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:47 +0800 Subject: ARM: dts: sun9i: Add i2c3 pinmux setting for A80 SoC i2c3 has only one possible pinmux setting on the A80 SoC. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 3ec727d76d1b..0a1f1a888308 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -352,6 +352,13 @@ #size-cells = <0>; #gpio-cells = <3>; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "i2c3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PH12", "PH13"; allwinner,function = "uart0"; -- cgit v1.2.3 From 46d6e0014e5b634fb33659f864e020a74036fd7a Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:48 +0800 Subject: ARM: dts: sun9i: Enable i2c3 on A80 Optimus board i2c3 is exposed on the GPIO extension header. Enable it so we can use it. Also enable internal pull-ups on the pins, as they don't seem to have external pull-up resistors. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 5d9bc80afef2..955436aa91d4 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -59,10 +59,23 @@ }; soc { + pio: pinctrl@06000800 { + i2c3_pins_a: i2c3@0 { + /* Enable internal pull-up */ + allwinner,pull = <1>; + }; + }; + uart0: serial@07000000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c3: i2c@07003400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; + }; }; }; -- cgit v1.2.3 From 420d9310c3a871d891d5d1b17dabe6917849a9e1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:49 +0800 Subject: ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board The A80 Optimus board has 3 usable LEDs that are controlled via GPIO. This patch adds support for 2 of them which are driver by GPIOs in the main pin controller. The remaining one uses GPIO from the R_PIO controller, which we don't support yet. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 955436aa91d4..87b1355e3cd7 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -64,6 +64,13 @@ /* Enable internal pull-up */ allwinner,pull = <1>; }; + + led_pins_optimus: led-pins@0 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@07000000 { @@ -78,4 +85,24 @@ status = "okay"; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_optimus>; + + /* The LED names match those found on the board */ + + led2 { + label = "optimus:led2:usr"; + gpios = <&pio 7 1 0>; + }; + + /* led3 is on PM15, in R_PIO */ + + led4 { + label = "optimus:led4:usr"; + gpios = <&pio 7 0 0>; + }; + }; }; -- cgit v1.2.3 From 7ed8e0ff228083425b4d59a388e6cd605a3508e3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:50 +0800 Subject: ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC uart4 only has one possible pinmux setting on the A80 SoC. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 0a1f1a888308..494714f67b57 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -365,6 +365,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + uart4_pins_a: uart4@0 { + allwinner,pins = "PG12", "PG13", "PG14", "PG15"; + allwinner,function = "uart4"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@07000000 { -- cgit v1.2.3 From 80204f37d6367a304e2b8a6c8c4c207c97832a39 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 31 Oct 2014 11:05:51 +0800 Subject: ARM: dts: sun9i: Enable uart4 for A80 Optimus board The A80 Optimus board exposes uart4 on the GPIO expansion header. Enable it so we can use it. Also enable the internal pull-ups, as there doesn't seem to be external pull-up resistors for pins on the expansion header. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 87b1355e3cd7..506948f582ee 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -71,6 +71,11 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + uart4_pins_a: uart4@0 { + /* Enable internal pull-up */ + allwinner,pull = <1>; + }; }; uart0: serial@07000000 { @@ -79,6 +84,12 @@ status = "okay"; }; + uart4: serial@07001000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; + }; + i2c3: i2c@07003400 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins_a>; -- cgit v1.2.3 From 25fa4a23ac7c5b60b27619660a48f64deb499d29 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: olinuxino lime: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: FUKAUMI Naoki --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 1eb8175959a6..3f3ff9693992 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -4,12 +4,48 @@ * Copyright 2014 - Hans de Goede * Copyright (c) 2014 FUKAUMI Naoki * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 6ebf276ab64b9811b1e5e52422d1b4db8cbc27e8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede Acked-by: Zoltan HERPAI --- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 46 +++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 6675bcd7860e..ce5994597407 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -2,12 +2,48 @@ * Copyright 2014 Zoltan HERPAI * Zoltan HERPAI * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 484338a1707f4ff556fc170de086ebb3e3e88b10 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: pcduino3: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Zoltan HERPAI --- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 46 ++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 046dfc0d45d8..8dca49b2477b 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -2,12 +2,48 @@ * Copyright 2014 Zoltan HERPAI * Zoltan HERPAI * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From a4df25c7a925288e2a56f84f0b1e98cae427f7f2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Emilio López Acked-by: Hans de Goede Acked-by: Olliver Schinagl Acked-by: Olof Johansson Acked-by: Roman Byshko Acked-by: Stefan Roese --- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 3ce56bfbc0b5..6a310da53f18 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -2,12 +2,48 @@ * Copyright 2012 Stefan Roese * Stefan Roese * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 6379589856bab88915a51ced1416693947963b98 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede Acked-by: Olof Johansson Acked-by: Roman Byshko --- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 429994e1943e..e31d291d14cb 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 9ce42e46b11ef8deb05a90343214b3cb17d296bf Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Wed, 12 Nov 2014 00:01:46 +0100 Subject: ARM: dts: sunxi: Banana Pi: increase startup-delay for the GMAC PHY regulator On the LeMaker Banana Pi, probing the external ethernet PHY connected to the SoC's internal GMAC module sometimes fails. The PHY power supply is handled via a GPIO-controlled regulator, and the existing regulator startup-delay of 50000us is too short to make sure that the PHY is always fully powered up when it is queried by phylib. Tests have shown that to provide a reliable PHY detection, the startup-delay has to be increased to at least 60000us. To have a certain safety margin and to cater for manufacturing variations between different boards, the delay gets set to 100000us as discussed on the linux-arm-kernel mailinglist. Signed-off-by: Karsten Merker Acked-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 3de847db7e76..1cf1214cc068 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -207,7 +207,7 @@ regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; + startup-delay-us = <100000>; enable-active-high; gpio = <&pio 7 23 0>; }; -- cgit v1.2.3 From e572844b82030176213407d38bdd57307a106798 Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:07 +0100 Subject: ARM: dtsi: sunxi: add common VBUS regulator Until now the regulator nodes for powering USB VBUS existed only for the two host controllers. Now the regulator is added for USB OTG too. Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index fa69adfea7fc..be5cfa335ae4 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -57,6 +57,13 @@ allwinner,pull = <0>; }; + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PB9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + usb1_vbus_pin_a: usb1_vbus_pin@0 { allwinner,pins = "PH6"; allwinner,function = "gpio_out"; @@ -85,6 +92,18 @@ status = "disabled"; }; + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_vbus_pin_a>; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 1 9 0>; + status = "disabled"; + }; + reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; -- cgit v1.2.3 From 134c60ad46ed0ca0ddbad106551960b2537b3790 Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:08 +0100 Subject: ARM: sun7i: dtsi: add support for usbphy0 Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 45bb9162f5c7..d7135f5282bc 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -552,8 +552,8 @@ reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>, <&usb_clk 2>; - reset-names = "usb1_reset", "usb2_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; -- cgit v1.2.3 From 1f8cc4d80f40e8dfb6caa6964deef48b8d1aba0e Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:09 +0100 Subject: ARM: dts: sun7i: Cubietruck: override regulator pin Cubietruck uses different pin for the USB OTG VBUS that is why we override the one defined in sunxi-common-regulators.dtsi Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index a6c1a3c717bc..16823078bf28 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -92,6 +92,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; pwm: pwm@01c20e00 { @@ -185,6 +192,12 @@ status = "okay"; }; + reg_usb0_vbus: usb0-vbus { + pinctrl-0 = <&usb0_vbus_pin_a>; + gpio = <&pio 7 17 0>; + status = "okay"; + }; + reg_usb1_vbus: usb1-vbus { status = "okay"; }; -- cgit v1.2.3 From 7ca026d0740c0f30b93cccf88e5c56c0e4d9592e Mon Sep 17 00:00:00 2001 From: Roman Byshko Date: Mon, 10 Nov 2014 19:55:10 +0100 Subject: ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUS Signed-off-by: Roman Byshko Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 16823078bf28..a281d259b9b8 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -40,6 +40,7 @@ }; usbphy: phy@01c13400 { + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3 From 7c7621ebef2da302062c064bfd2872c9c591a8d3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 13 Nov 2014 10:31:43 +0100 Subject: ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This avoids it getting briefly turned off between when the regulator getting registered and the ahci driver turning it back on, thus avoiding the disk going into emergency head park mode. Reported-by: Bruno Prémont Tested-by: Bruno Prémont Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index be5cfa335ae4..d8876634f965 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -87,6 +87,7 @@ regulator-name = "ahci-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 1 8 0>; status = "disabled"; -- cgit v1.2.3 From fad1d5531dd62c61a7a250674931fcc758f0c569 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 13 Nov 2014 10:31:48 +0100 Subject: ARM: dts: sun6i: Add EHCI support for the M9 board The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal usb wifi card, the other to a build-in usb-hub, so neither need their OHCI companion controller to be enabled since the are always connected at USB-2 speeds. The controller which is attached to the wifi also does not need a vbus regulator. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-m9.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index c887be6cea3d..e81eed328c82 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -68,6 +68,19 @@ status = "okay"; }; + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + ehci1: usb@01c1b000 { + status = "okay"; + }; + pio: pinctrl@01c20800 { mmc0_cd_pin_m9: mmc0_cd_pin@0 { allwinner,pins = "PH22"; @@ -75,6 +88,13 @@ allwinner,drive = <0>; allwinner,pull = <1>; }; + + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@01c28000 { @@ -83,4 +103,11 @@ status = "okay"; }; }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 0>; + status = "okay"; + }; }; -- cgit v1.2.3 From ba61e8938ffcc79ce4aba834a1218d0e958b49b7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 13 Nov 2014 10:31:49 +0100 Subject: ARM: dts: sun6i: Add support for the status led The Mele M9 / A1000G quad has a blue status led, add support for this. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-m9.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index e81eed328c82..66bb7c918e20 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -82,6 +82,13 @@ }; pio: pinctrl@01c20800 { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + mmc0_cd_pin_m9: mmc0_cd_pin@0 { allwinner,pins = "PH22"; allwinner,function = "gpio_in"; @@ -104,6 +111,17 @@ }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; + + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 0>; + }; + }; + reg_usb1_vbus: usb1-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; -- cgit v1.2.3 From f6c3b0460850574f0131f8fd8903d8a766f35cac Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 13 Nov 2014 02:08:32 +0800 Subject: ARM: sun6i: DT: Add PLL6 multiple outputs PLL6 on sun6i has multiple outputs, just like the other sunxi platforms. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 4c4792fea0b7..529c73803976 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -132,11 +132,11 @@ }; pll6: clk@01c20028 { - #clock-cells = <0>; + #clock-cells = <1>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; - clock-output-names = "pll6"; + clock-output-names = "pll6", "pll6x2"; }; cpu: cpu@01c20050 { @@ -166,7 +166,7 @@ #clock-cells = <0>; compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1_mux"; }; @@ -221,7 +221,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; clock-output-names = "apb2_mux"; }; @@ -248,7 +248,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc0"; }; @@ -256,7 +256,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc1"; }; @@ -264,7 +264,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc2"; }; @@ -272,7 +272,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "mmc3"; }; @@ -280,7 +280,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi0"; }; @@ -288,7 +288,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi1"; }; @@ -296,7 +296,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi2"; }; @@ -304,7 +304,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6>; + clocks = <&osc24M>, <&pll6 0>; clock-output-names = "spi3"; }; @@ -364,7 +364,7 @@ /* DMA controller requires AHB1 clocked from PLL6 */ assigned-clocks = <&ahb1_mux>; - assigned-clock-parents = <&pll6>; + assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { @@ -844,7 +844,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; clock-output-names = "ar100"; }; -- cgit v1.2.3 From 109588fd214c930ce6561997250f0eea456a8f7b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 16 Nov 2014 20:49:01 +0100 Subject: ARM: dts: sun6i: Add ethernet support to M9 board The Mele M9 has an ethernet board, enable it. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-m9.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 66bb7c918e20..3ab544f3af4a 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -109,6 +109,18 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + gmac: ethernet@01c30000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; }; leds { -- cgit v1.2.3 From 5790d4ee1e425fefef0e012d1415c25baeb9dae8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Nov 2014 16:34:34 +0100 Subject: ARM: dts: sun4i: Add simplefb node Add a simplefb template node for u-boot to further fill and activate. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 380f914b226d..3ecc14936734 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -27,6 +27,18 @@ serial7 = &uart7; }; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0-hdmi { + compatible = "simple-framebuffer"; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From d501841fc42a97a8b69449135eadf6e9c4589a87 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Nov 2014 16:34:35 +0100 Subject: ARM: dts: sun5i: Add simplefb node Add a simplefb template node for u-boot to further fill and activate. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 531272c0e526..f1be4a1799a3 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -24,6 +24,18 @@ serial3 = &uart3; }; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0-hdmi { + compatible = "simple-framebuffer"; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + status = "disabled"; + }; + }; + cpus { cpu@0 { compatible = "arm,cortex-a8"; -- cgit v1.2.3 From e53a8b2201384ee1a2cfd1609c9ffdf951b041a1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Nov 2014 16:34:36 +0100 Subject: ARM: dts: sun6i: Add simplefb node Add a simplefb template node for u-boot to further fill and activate. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 529c73803976..3ee513f82feb 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -62,6 +62,16 @@ ethernet0 = &gmac; }; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0-hdmi { + compatible = "simple-framebuffer"; + status = "disabled"; + }; + }; cpus { enable-method = "allwinner,sun6i-a31"; -- cgit v1.2.3 From 8efc5c2be5b29f7ceec83bb471da81690273e141 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Nov 2014 16:34:37 +0100 Subject: ARM: dts: sun7i: Add simplefb node Add a simplefb template node for u-boot to further fill and activate. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index d7135f5282bc..fef1b4e7943f 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -64,6 +64,18 @@ serial7 = &uart7; }; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0-hdmi { + compatible = "simple-framebuffer"; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 678e75d3e5526bee1b09f0e916096ec7f7d35c8e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 16 Nov 2014 17:09:32 +0100 Subject: ARM: dts: sunxi: Add de_be0 clk parent pll to simplefb node Avoid the parent pll for the mod-clk for de_be0 getting disabled when non of the other users are enabled (which can happen when none of i2c, spi and mmc are in use). Note for now we point directly to the parent rather then to the de_be0 mod-clk as that is not modelled in our devicetree yet. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 3 ++- arch/arm/boot/dts/sun5i-a10s.dtsi | 3 ++- arch/arm/boot/dts/sun6i-a31.dtsi | 1 + arch/arm/boot/dts/sun7i-a20.dtsi | 3 ++- 4 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 3ecc14936734..02d611862a99 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -34,7 +34,8 @@ framebuffer0-hdmi { compatible = "simple-framebuffer"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index f1be4a1799a3..419b1b0937c8 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -31,7 +31,8 @@ framebuffer0-hdmi { compatible = "simple-framebuffer"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 3ee513f82feb..0631873c76bb 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -69,6 +69,7 @@ framebuffer0-hdmi { compatible = "simple-framebuffer"; + clocks = <&pll6 0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index fef1b4e7943f..786aa656f3bb 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -71,7 +71,8 @@ framebuffer0-hdmi { compatible = "simple-framebuffer"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>; status = "disabled"; }; }; -- cgit v1.2.3 From a9f8cda32a3acc3150755fe973f7fa1867a7a5d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 18 Nov 2014 12:07:13 +0100 Subject: ARM: dts: sunxi: Update simplefb nodes so that u-boot can find them Review of the u-boot sunxi simplefb patches has led to the decision that u-boot should not use a specific path to find the nodes as this goes contrary to how devicetree usually works. Instead a platform specific compatible + properties should be used for this. The simplefb bindings have already been updated to reflect this, this patch brings the sunxi devicetree files in line with the new binding, and the actual u-boot implementation as it is going upstream. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 5 +++-- arch/arm/boot/dts/sun5i-a10s.dtsi | 5 +++-- arch/arm/boot/dts/sun6i-a31.dtsi | 5 +++-- arch/arm/boot/dts/sun7i-a20.dtsi | 5 +++-- 4 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 02d611862a99..e3ab942fd148 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -32,8 +32,9 @@ #size-cells = <1>; ranges; - framebuffer0-hdmi { - compatible = "simple-framebuffer"; + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; status = "disabled"; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 419b1b0937c8..81ad4b94e812 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -29,8 +29,9 @@ #size-cells = <1>; ranges; - framebuffer0-hdmi { - compatible = "simple-framebuffer"; + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; status = "disabled"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 0631873c76bb..a400172a8a52 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -67,8 +67,9 @@ #size-cells = <1>; ranges; - framebuffer0-hdmi { - compatible = "simple-framebuffer"; + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll6 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 786aa656f3bb..82a524ce28ad 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -69,8 +69,9 @@ #size-cells = <1>; ranges; - framebuffer0-hdmi { - compatible = "simple-framebuffer"; + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; status = "disabled"; -- cgit v1.2.3 From b0f9ce4e21c147051c97574651e38edf07e3dd5b Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Sun, 23 Nov 2014 11:41:59 +0200 Subject: ARM: dts: cm-t3x: add I2C1 pinmux Add missing I2C1 pinmux setup. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 3a98ce10169e..620a3f4de5fa 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -137,6 +137,13 @@ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */ >; }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; }; &uart3 { @@ -155,6 +162,9 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; at24@50 { -- cgit v1.2.3 From e6fb427241e47ea216e20a90c43dedf7465723fb Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Sun, 23 Nov 2014 11:42:00 +0200 Subject: ARM: dts: cm-t3x: add TV out support Add TV out support. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 22 ++++++++++++++++++++++ arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 4 ++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 620a3f4de5fa..63bea24f9917 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -56,6 +56,17 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + tv0: connector@1 { + compatible = "svideo-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; }; &omap3_pmx_core { @@ -221,3 +232,14 @@ linux,wakeup; }; }; + +&venc { + status = "ok"; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 3cbaf98c1372..9cc718536c02 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -66,6 +66,10 @@ #include "twl4030_omap3.dtsi" #include +&venc { + vdda-supply = <&vdac>; +}; + &mmc1 { vmmc-supply = <&vmmc1>; }; -- cgit v1.2.3 From b360e98a24d357ff4c737bdf369e30c8fedcf40c Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Sun, 23 Nov 2014 11:42:01 +0200 Subject: ARM: dts: sbc-t3x: add TV out display alias Add display alias for TV out. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-sbc-t3517.dts | 1 + arch/arm/boot/dts/omap3-sbc-t3530.dts | 1 + arch/arm/boot/dts/omap3-sbc-t3730.dts | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index 4ec5d8684122..17986536c61f 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -11,6 +11,7 @@ aliases { display0 = &dvi0; + display1 = &tv0; }; /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index 8dfc1df8cc17..c994f0f7e38a 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -11,6 +11,7 @@ aliases { display0 = &dvi0; + display1 = &tv0; }; }; diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 6b69864bd6ce..5bdddf29341d 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -11,6 +11,7 @@ aliases { display0 = &dvi0; + display1 = &tv0; }; }; -- cgit v1.2.3 From 01e9ef69422d87fa943a527341b326dcc94703b3 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Sun, 23 Nov 2014 11:42:02 +0200 Subject: ARM: dts: sbc-t3x30: add audio support Add audio related DT nodes Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 16 ++++++++++++++++ arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/omap3-sb-t35.dtsi | 16 ++++++++++++++++ 3 files changed, 46 insertions(+) diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 63bea24f9917..6ea6d460db30 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -155,6 +155,15 @@ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ + >; + }; }; &uart3 { @@ -243,3 +252,10 @@ }; }; }; + +&mcbsp2 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 9cc718536c02..9a4a3ab9af78 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -10,6 +10,14 @@ cpu0-supply = <&vcc>; }; }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "cm-t35"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &omap3_pmx_core { @@ -59,6 +67,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index aff733e4ad59..827f614261f6 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -43,6 +43,16 @@ }; }; }; + + audio_amp: audio_amp { + compatible = "regulator-fixed"; + regulator-name = "audio_amp"; + pinctrl-names = "default"; + pinctrl-0 = <&sb_t35_audio_amp>; + gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */ + enable-active-low; + regulator-always-on; + }; }; &omap3_pmx_core { @@ -65,6 +75,12 @@ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; + + sb_t35_audio_amp: pinmux_sb_t35_audio_amp { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */ + >; + }; }; &i2c3 { -- cgit v1.2.3 From ae3c0f75089fdfe0c1cd409cacc9ecd5122a78c6 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 3 Sep 2014 17:21:45 +0300 Subject: ARM: dts: dra7: Add syscon regmap for CORE CONTROL area Display and DCAN drivers use syscon regmap to access some registers in the CORE control area. Add the syscon regmap node for this area. Cc: Tomi Valkeinen Cc: Nishanth Menon Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1442b48c4b04..960b2c5e0df1 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -207,6 +207,11 @@ ti,hwmods = "counter_32k"; }; + dra7_ctrl_core: ctrl_core@4a002000 { + compatible = "syscon"; + reg = <0x4a002000 0x6d0>; + }; + dra7_ctrl_general: tisyscon@4a002e00 { compatible = "syscon"; reg = <0x4a002e00 0x7c>; -- cgit v1.2.3 From 9ec49b9f2b43a09f6263c955b84419467a1d64e0 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 15 Aug 2014 16:08:36 +0300 Subject: ARM: dts: DRA7: Add DCAN nodes The SoC supports 2 DCAN nodes. Add them. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 960b2c5e0df1..63bf99be1762 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -40,6 +40,8 @@ serial9 = &uart10; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; + d_can0 = &dcan1; + d_can1 = &dcan2; }; timer { @@ -1400,6 +1402,25 @@ }; }; + dcan1: can@481cc000 { + compatible = "ti,dra7-d_can"; + ti,hwmods = "dcan1"; + reg = <0x4ae3c000 0x2000>; + syscon-raminit = <&dra7_ctrl_core 0x558 0>; + interrupts = ; + clocks = <&dcan1_sys_clk_mux>; + status = "disabled"; + }; + + dcan2: can@481d0000 { + compatible = "ti,dra7-d_can"; + ti,hwmods = "dcan2"; + reg = <0x48480000 0x2000>; + syscon-raminit = <&dra7_ctrl_core 0x558 1>; + interrupts = ; + clocks = <&sys_clkin1>; + status = "disabled"; + }; }; }; -- cgit v1.2.3 From b41502e0a59f027775085982af1159446f612f95 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 15 Aug 2014 16:09:19 +0300 Subject: ARM: dts: dra7-evm: Add CAN support The board has 2 CAN ports but only the first one can be used. Enable the first CAN port. WAKEUP0 pin doesn't have INPUT enable bit so we just disable weak PULLs. The second CAN port cannot be used without hardware modification so we don't enable the second port. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 0d8a3bd0f00d..736092b1a535 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -251,6 +251,21 @@ >; }; + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ + 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ + 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ + 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ + 0x418 (MUX_MODE15) /* wakeup0.off */ + >; + }; }; &i2c1 { @@ -639,3 +654,10 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; }; + +&dcan1 { + status = "ok"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan1_pins_default>; + pinctrl-1 = <&dcan1_pins_sleep>; +}; -- cgit v1.2.3 From ea95af3c168b2bb74b1cad0f45a4609ba929afa5 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 3 Nov 2014 13:07:18 +0200 Subject: ARM: dts: dra72-evm: Add CAN support The board has 2 CAN ports but only the first one can be used. Enable the first CAN port. WAKEUP0 pin doesn't have INPUT enable bit so we just disable weak PULLs. The second CAN port cannot be used without hardware modification so we don't enable the second port. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index abbaaa782f88..afc74fd4bb5e 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -105,6 +105,22 @@ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ + 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ + 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ + 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ + 0x418 (MUX_MODE15) /* wakeup0.off */ + >; + }; }; &i2c1 { @@ -438,3 +454,10 @@ pinctrl-1 = <&davinci_mdio_sleep>; active_slave = <1>; }; + +&dcan1 { + status = "ok"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan1_pins_default>; + pinctrl-1 = <&dcan1_pins_sleep>; +}; -- cgit v1.2.3 From 3a51dec128b47f4cf5d797aa35d24988e0bee571 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 8 Sep 2014 15:45:10 +0300 Subject: ARM: dts: am4372: Add control module syscon node Use syscon regmap to expose the Control module register space. This register space is shared between many users e.g. DCAN, USB, display, etc. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 815eabf7f449..42d791c4ad73 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -57,6 +57,11 @@ cache-level = <2>; }; + am43xx_control_module: control_module@4a002000 { + compatible = "syscon"; + reg = <0x44e10000 0x7f4>; + }; + am43xx_pinmux: pinmux@44e10800 { compatible = "ti,am437-padconf", "pinctrl-single"; reg = <0x44e10800 0x31c>; -- cgit v1.2.3 From 9e63b0d4ae8837393f94a59e28c04af09abc673c Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 4 Sep 2014 15:36:03 +0300 Subject: ARM: dts: am4372: Add DCAN nodes The SoC contains 2 DCAN modules. Add them. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 42d791c4ad73..d42d7865dd53 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -922,6 +922,28 @@ compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ }; + + dcan0: can@481cc000 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + ti,hwmods = "d_can0"; + clocks = <&dcan0_fck>; + clock-names = "fck"; + reg = <0x481cc000 0x2000>; + syscon-raminit = <&am43xx_control_module 0x644 0>; + interrupts = ; + status = "disabled"; + }; + + dcan1: can@481d0000 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + ti,hwmods = "d_can1"; + clocks = <&dcan1_fck>; + clock-names = "fck"; + reg = <0x481d0000 0x2000>; + syscon-raminit = <&am43xx_control_module 0x644 1>; + interrupts = ; + status = "disabled"; + }; }; }; -- cgit v1.2.3 From 4b1ce2358b70f9606a4ce95e5fd467d7655b1cd0 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Fri, 18 Jul 2014 11:29:11 +0530 Subject: ARM: dts: am437x-gp: Add dcan support Add DCAN support for AM437x GP EVM with both DCAN instances. [Roger Q] Updated output pin to not use pull up. Signed-off-by: Mugunthan V N Signed-off-by: George Cherian Signed-off-by: Sekhar Nori Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 2ffd6d6dcc87..bd8d932c591c 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -254,6 +254,20 @@ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; + + dcan0_default: dcan0_default_pins { + pinctrl-single,pins = < + 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ + >; + }; + + dcan1_default: dcan1_default_pins { + pinctrl-single,pins = < + 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ + 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ + >; + }; }; &i2c0 { @@ -519,3 +533,15 @@ }; }; }; + +&dcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_default>; + status = "okay"; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_default>; + status = "okay"; +}; -- cgit v1.2.3 From 63728d57279a1bf48618230c15f7b49179f0d64d Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 9 Sep 2014 16:28:01 +0300 Subject: ARM: dts: am33xx: Add control module syscon node Use syscon regmap to expose the Control module register space. This register space is shared between many users e.g. DCAN, USB, display, etc. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 62bf053d2cb8..887e86addcef 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -83,6 +83,11 @@ }; }; + am33xx_control_module: control_module@4a002000 { + compatible = "syscon"; + reg = <0x44e10000 0x7fc>; + }; + am33xx_pinmux: pinmux@44e10800 { compatible = "pinctrl-single"; reg = <0x44e10800 0x0238>; -- cgit v1.2.3 From e23aabc6e607dfc49ba22855264e78abef1fda34 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 9 Sep 2014 16:15:35 +0300 Subject: ARM: dts: am33xx: Update DCAN nodes Add "raminit-syscon" property to specify the RAMINIT register. Add clock information. Rename can nodes from "d_can" to "can" to be compliant with the ePAPR specs. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 887e86addcef..befe713b3e1b 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -344,20 +344,24 @@ interrupts = <91>; }; - dcan0: d_can@481cc000 { - compatible = "bosch,d_can"; + dcan0: can@481cc000 { + compatible = "ti,am3352-d_can"; ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000 - 0x44e10644 0x4>; + reg = <0x481cc000 0x2000>; + clocks = <&dcan0_fck>; + clock-names = "fck"; + syscon-raminit = <&am33xx_control_module 0x644 0>; interrupts = <52>; status = "disabled"; }; - dcan1: d_can@481d0000 { - compatible = "bosch,d_can"; + dcan1: can@481d0000 { + compatible = "ti,am3352-d_can"; ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000 - 0x44e10644 0x4>; + reg = <0x481d0000 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&am33xx_control_module 0x644 1>; interrupts = <55>; status = "disabled"; }; -- cgit v1.2.3 From f80ecaf55b4982a888272790743dabf2c715dc10 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 29 Oct 2014 17:52:57 +0200 Subject: ARM: dts: am335x-evm: Add DCAN1 details DCAN1 is routed to CAN port (J11) when Profile 1 is selected on the profile selection switch. Provide information for DCAN1 pins and node but keep it disabled by default. User has to manually enable it if Profile 1 is chosen. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 43a536c08c9f..d46b31c45af0 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -307,6 +307,13 @@ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; }; &uart0 { @@ -664,3 +671,9 @@ &aes { status = "okay"; }; + +&dcan1 { + status = "disabled"; /* Enable only if Profile 1 is selected */ + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins_default>; +}; -- cgit v1.2.3 From 3fd0c05da46c4dc23b71f2387b611a64f6772283 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 24 Nov 2014 22:01:24 +0100 Subject: Revert "ARM: dts: sunxi: Use sun4i-a10-apb1-clk for sun6i/sun8i apb2 clocks." This reverts commit 338302ae32b7be73da97b746f660b283642cfc5c. This is one of two commits that resulted in a boot regression. Conflicts: arch/arm/boot/dts/sun6i-a31.dtsi Signed-off-by: Arnd Bergmann Link: http://lkml.kernel.org/r/7h1toxr0ku.fsf@deeprootsystems.com --- arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++++++++-- arch/arm/boot/dts/sun8i-a23.dtsi | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index f1519a8a2ac7..529c73803976 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -217,11 +217,19 @@ "apb1_daudio1"; }; - apb2: clk@01c20058 { + apb2_mux: apb2_mux@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clock-output-names = "apb2_mux"; + }; + + apb2: apb2@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-apb2-div-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb2_mux>; clock-output-names = "apb2"; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 0746cd1024d7..6086adbf9d74 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -189,11 +189,19 @@ "apb1_daudio0", "apb1_daudio1"; }; - apb2: clk@01c20058 { + apb2_mux: apb2_mux_clk@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "apb2_mux"; + }; + + apb2: apb2_clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-apb2-div-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb2_mux>; clock-output-names = "apb2"; }; -- cgit v1.2.3 From da1a7592132eb8f71056bd168fccbe2801c5d697 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 24 Nov 2014 22:06:38 +0100 Subject: Revert "ARM: dts: sunxi: unify APB1 clock" This reverts commit e883d67285e9267c73f8d2b9d32aa9e712ad00a4. Signed-off-by: Arnd Bergmann Link: http://lkml.kernel.org/r/7h1toxr0ku.fsf@deeprootsystems.com --- arch/arm/boot/dts/sun4i-a10.dtsi | 12 ++++++++++-- arch/arm/boot/dts/sun5i-a10s.dtsi | 12 ++++++++++-- arch/arm/boot/dts/sun5i-a13.dtsi | 12 ++++++++++-- arch/arm/boot/dts/sun7i-a20.dtsi | 12 ++++++++++-- 4 files changed, 40 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 5e2ec2dd8333..380f914b226d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -174,11 +174,19 @@ "apb0_ir1", "apb0_keypad"; }; - apb1: clk@01c20058 { + apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1_mux"; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index d2a85144d2d9..531272c0e526 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -162,11 +162,19 @@ "apb0_ir", "apb0_keypad"; }; - apb1: clk@01c20058 { + apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1_mux"; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c35217ea1f64..b131068f4f35 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -161,11 +161,19 @@ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - apb1: clk@01c20058 { + apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1_mux"; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; clock-output-names = "apb1"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 7e30e267c317..d7135f5282bc 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -222,11 +222,19 @@ "apb0_iis2", "apb0_keypad"; }; - apb1: clk@01c20058 { + apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1_mux"; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; clock-output-names = "apb1"; }; -- cgit v1.2.3 From 9774d96beb2a6454760a0cf5ff8f8f1ce56fc425 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 24 Nov 2014 12:59:00 +0800 Subject: ARM: dts: rockchip: add RK3288 Thermal data This patch changes a dtsi file to contain the thermal data on RK3288 and later SoCs. This data will enable a thermal shutdown over 90C. Signed-off-by: Caesar Wang Reviewed-by: Dmitry Torokhov Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-thermal.dtsi | 74 +++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-thermal.dtsi diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi new file mode 100644 index 000000000000..2695200c0af7 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-thermal.dtsi @@ -0,0 +1,74 @@ +/* + * Device Tree Source for RK3288 SoC thermal + * + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include + +reserve_thermal: reserve_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; +}; + +cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 1>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +gpu_thermal: gpu_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 2>; + + trips { + gpu_alert0: gpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; -- cgit v1.2.3 From b67d6bc388236635377a07db432834b94a47cb5d Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 24 Nov 2014 12:59:01 +0800 Subject: ARM: dts: rockchip: add main thermal info to rk3288 If for some reason we are unable to shut it down in orderly fashion (kernel is stuck holding a lock or similar), then hardware TSHUT will reset it. If the temperature is over 95C over a period of time the thermal shutdown of the tsadc is invoked with can either reset the entire chip via the CRU, or notify the PMIC via a GPIO. This should be set in the specific board. Signed-off-by: Caesar Wang Reviewed-by: Dmitry Torokhov Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index ebcd2d2eef74..acb6a2fba183 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -15,6 +15,7 @@ #include #include #include +#include #include "skeleton.dtsi" / { @@ -68,6 +69,7 @@ 216000 900000 126000 900000 >; + #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; }; @@ -357,6 +359,25 @@ status = "disabled"; }; + thermal-zones { + #include "rk3288-thermal.dtsi" + }; + + tsadc: tsadc@ff280000 { + compatible = "rockchip,rk3288-tsadc"; + reg = <0xff280000 0x100>; + interrupts = ; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "default"; + pinctrl-0 = <&otp_out>; + #thermal-sensor-cells = <1>; + rockchip,hw-tshut-temp = <95000>; + status = "disabled"; + }; + usb_host0_ehci: usb@ff500000 { compatible = "generic-ehci"; reg = <0xff500000 0x100>; @@ -1016,6 +1037,12 @@ }; }; + tsadc { + otp_out: otp-out { + rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; -- cgit v1.2.3 From ff9d0ecbbe9181b6fb575223e79c6b98c687af8d Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 24 Nov 2014 12:59:02 +0800 Subject: ARM: dts: rockchip: enable thermal on rk3288-evb board When a thermal temperature is invoked use the CRU to reset the chip on rk3288-evb boards. TSHUT is low active on these boards. Signed-off-by: Caesar Wang Reviewed-by: Dmitry Torokhov Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-evb.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index cb83cea52fa1..3e067dd65d0c 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -148,6 +148,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + &pinctrl { backlight { bl_en: bl-en { -- cgit v1.2.3 From e6067f29afd122bab8402e086a61324ef11521fe Mon Sep 17 00:00:00 2001 From: Rongjun Ying Date: Tue, 25 Nov 2014 18:46:42 +0800 Subject: ARM: dts: prima2: add I2S 2ch, 6ch, nodin, mclk groups we have done that for atlas6 in commit ed36c1a, 086b8904 etc. here we do same things for prima2. Signed-off-by: Rongjun Ying Signed-off-by: Barry Song Acked-by: Linus Walleij --- arch/arm/boot/dts/prima2.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 963b7e54ab15..bc6e61195f12 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -524,12 +524,36 @@ sirf,function = "sdmmc5"; }; }; + i2s_mclk_pins_a: i2s_mclk@0 { + i2s_mclk { + sirf,pins = "i2smclkgrp"; + sirf,function = "i2s_mclk"; + }; + }; + i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 { + i2s_ext_clk_input { + sirf,pins = "i2s_ext_clk_inputgrp"; + sirf,function = "i2s_ext_clk_input"; + }; + }; i2s_pins_a: i2s@0 { i2s { sirf,pins = "i2sgrp"; sirf,function = "i2s"; }; }; + i2s_no_din_pins_a: i2s_no_din@0 { + i2s_no_din { + sirf,pins = "i2s_no_dingrp"; + sirf,function = "i2s_no_din"; + }; + }; + i2s_6chn_pins_a: i2s_6chn@0 { + i2s_6chn { + sirf,pins = "i2s_6chngrp"; + sirf,function = "i2s_6chn"; + }; + }; ac97_pins_a: ac97@0 { ac97 { sirf,pins = "ac97grp"; -- cgit v1.2.3 From 5427b0d2bf8865abf5df46d7736cd60a0dc5f9d8 Mon Sep 17 00:00:00 2001 From: Rongjun Ying Date: Tue, 25 Nov 2014 18:46:42 +0800 Subject: ARM: dts: atlas6: add a separate pingroup for i2s mclk output The I2S controller can output mclk to external audio codec. But by hardware design, some codecs need mclk and some codecs do not need mclk. So the mclk pin can be an independent pinctrl group, and the card driver can get it or not based on boards. Signed-off-by: Rongjun Ying Signed-off-by: Barry Song Acked-by: Linus Walleij --- arch/arm/boot/dts/atlas6.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index bb22842a0826..d3de7a35825b 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -522,6 +522,12 @@ sirf,function = "sdmmc5"; }; }; + i2s_mclk_pins_a: i2s_mclk@0 { + i2s_mclk { + sirf,pins = "i2smclkgrp"; + sirf,function = "i2s_mclk"; + }; + }; i2s_pins_a: i2s@0 { i2s { sirf,pins = "i2sgrp"; -- cgit v1.2.3 From 110afb8b42ea68439b352a87e06563a3a85df6c6 Mon Sep 17 00:00:00 2001 From: Rongjun Ying Date: Tue, 25 Nov 2014 18:46:43 +0800 Subject: ARM: dts: atlas6: Add I2S external clock input pingroup The I2S controller can use the external clock as reference clock with master mode. But based on different hardware or software design, this external clock might be needed or not needed. So the external input pin can be an independent pinctrl group, and the card driver can decice to get it or not. Signed-off-by: Rongjun Ying Signed-off-by: Barry Song Acked-by: Linus Walleij --- arch/arm/boot/dts/atlas6.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index d3de7a35825b..1eb83c84d9dc 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -528,6 +528,12 @@ sirf,function = "i2s_mclk"; }; }; + i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 { + i2s_ext_clk_input { + sirf,pins = "i2s_ext_clk_inputgrp"; + sirf,function = "i2s_ext_clk_input"; + }; + }; i2s_pins_a: i2s@0 { i2s { sirf,pins = "i2sgrp"; -- cgit v1.2.3 From 64a7507a7496f5adb88a55e572c659a82997f9c9 Mon Sep 17 00:00:00 2001 From: Ye He Date: Tue, 25 Nov 2014 18:46:43 +0800 Subject: ARM: dts: prima2: add node for Performance Monitor Unit It enables Performance Monitor Unit on CSR SiRFprimaII. Signed-off-by: Ye He Signed-off-by: Barry Song --- arch/arm/boot/dts/prima2.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index bc6e61195f12..3bb1b4ab55de 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -41,6 +41,11 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <29>; + }; + axi { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3 From 1f634d7415441f723791d822fcde12dd50838d51 Mon Sep 17 00:00:00 2001 From: Tao Huang Date: Tue, 25 Nov 2014 18:46:43 +0800 Subject: ARM: dts: prima2: add resets property for GPS nodes this patch adds missed resets property for CSR SiRFprimaII GPS related nodes. Signed-off-by: Tao Huang Signed-off-by: Barry Song --- arch/arm/boot/dts/prima2.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 3bb1b4ab55de..70b2ad5d837e 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -178,6 +178,7 @@ compatible = "sirf,prima2-dspif"; reg = <0xa8000000 0x10000>; interrupts = <9>; + resets = <&rstc 1>; }; gps@a8010000 { @@ -185,6 +186,7 @@ reg = <0xa8010000 0x10000>; interrupts = <7>; clocks = <&clks 9>; + resets = <&rstc 2>; }; dsp@a9000000 { @@ -192,6 +194,7 @@ reg = <0xa9000000 0x1000000>; interrupts = <8>; clocks = <&clks 8>; + resets = <&rstc 0>; }; }; -- cgit v1.2.3 From f97b1a1de44fbd39c8a992afc0f322f3d0ff8d11 Mon Sep 17 00:00:00 2001 From: Renwei Wu Date: Tue, 25 Nov 2014 18:46:43 +0800 Subject: ARM: dts: prima2: add resets property for VPP nodes this patch adds missed resets property for CSR SiRFprimaII Video Post Processor(VPP) node. Signed-off-by: Renwei Wu Signed-off-by: Barry Song --- arch/arm/boot/dts/prima2.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 70b2ad5d837e..1ca1a9aa953f 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -137,6 +137,7 @@ reg = <0x90020000 0x10000>; interrupts = <31>; clocks = <&clks 35>; + resets = <&rstc 6>; }; }; -- cgit v1.2.3 From f17352ca9a241208671f8f725e88e1dded486460 Mon Sep 17 00:00:00 2001 From: Renwei Wu Date: Tue, 25 Nov 2014 18:46:43 +0800 Subject: ARM: dts: atlas6: add resets property for VPP nodes this patch adds missed resets property for CSR SiRFatlasVI Video Post Processor(VPP) node. Signed-off-by: Renwei Wu Signed-off-by: Barry Song --- arch/arm/boot/dts/atlas6.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 1eb83c84d9dc..c12d13908b2d 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -131,6 +131,7 @@ reg = <0x90020000 0x10000>; interrupts = <31>; clocks = <&clks 35>; + resets = <&rstc 6>; }; }; -- cgit v1.2.3 From 294a212faa5bf7cb48fabccec5ee13e836e29ecb Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 25 Nov 2014 18:46:43 +0800 Subject: ARM: dts: atlas6: add resets property for SPI nodes this patch adds missed resets property for CSR SiRFatlasVI SPI nodes. Signed-off-by: Qipan Li Signed-off-by: Barry Song --- arch/arm/boot/dts/atlas6.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index c12d13908b2d..29598667420b 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -313,6 +313,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&clks 19>; + resets = <&rstc 26>; status = "disabled"; }; @@ -328,6 +329,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&clks 20>; + resets = <&rstc 27>; status = "disabled"; }; -- cgit v1.2.3 From a02fe6452202f1005a69f1310cc322630f68f3ae Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 17:19:50 +0100 Subject: arm: mvebu: fix wrongly named DS414 pinctrl entries While renaming pinctrl entries during reviews of Synology DS414 support series, I missed three entries, as reported by Ben. This patch fixes those. Reported-by: Ben Peddell Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/608e4fd6e06e9c5289a84b9c38e81b2456dbcd79.1416670812.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-synology-ds414.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index ba5e94d27c21..97cbf980c54d 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -308,17 +308,17 @@ marvell,function = "gpio"; }; - pmx_syno_id_bit1: syno-id-bit1-pin { + syno_id_bit1_pin: syno-id-bit1-pin { marvell,pins = "mpp28"; marvell,function = "gpio"; }; - pmx_syno_id_bit2: syno-id-bit2-pin { + syno_id_bit2_pin: syno-id-bit2-pin { marvell,pins = "mpp29"; marvell,function = "gpio"; }; - pmx_fan1_alarm: fan1-alarm-pin { + fan1_alarm_pin: fan1-alarm-pin { marvell,pins = "mpp33"; marvell,function = "gpio"; }; -- cgit v1.2.3 From 70ee4e9d9f054e258480fd51c90cfc2b72be8b78 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 22 Nov 2014 17:23:30 +0100 Subject: arm: mvebu: normalize pinctrl entries for Armada SoCs There are currently 2 differents naming conventions used between the existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s) and pmx_*: pmx-*) with a vast majority of files using the former: $ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l 155 $ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l 13 In fact, only some Armada XP files are using the second variant. This patch normalizes those files (mainly ge0/1 entries) to use the first variant. Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 12 ++++++------ arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 4 ++-- arch/arm/boot/dts/armada-xp-synology-ds414.dts | 4 ++-- arch/arm/boot/dts/armada-xp.dtsi | 6 +++--- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index c9d25bdbe795..ca0200e20751 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -84,14 +84,14 @@ }; ethernet@70000 { - pinctrl-0 = <&pmx_ge0_rgmii>; + pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { - pinctrl-0 = <&pmx_ge1_rgmii>; + pinctrl-0 = <&ge1_rgmii_pins>; pinctrl-names = "default"; status = "okay"; phy = <&phy1>; @@ -116,7 +116,7 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&pmx_keys>; + pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; button@1 { @@ -128,15 +128,15 @@ }; &pinctrl { - pinctrl-0 = <&pmx_phy_int>; + pinctrl-0 = <&phy_int_pin>; pinctrl-names = "default"; - pmx_keys: pmx-keys { + keys_pin: keys-pin { marvell,pins = "mpp33"; marvell,function = "gpio"; }; - pmx_phy_int: pmx-phy-int { + phy_int_pin: phy-int-pin { marvell,pins = "mpp32"; marvell,function = "gpio"; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 088d8d2fe9eb..a2ef93c1eb10 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -66,7 +66,7 @@ }; ethernet@70000 { - pinctrl-0 = <&pmx_ge0_rgmii>; + pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; status = "okay"; phy = <&phy0>; @@ -74,7 +74,7 @@ }; ethernet@74000 { - pinctrl-0 = <&pmx_ge1_rgmii>; + pinctrl-0 = <&ge1_rgmii_pins>; pinctrl-names = "default"; status = "okay"; phy = <&phy1>; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 97cbf980c54d..749fdba5a642 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -184,14 +184,14 @@ ethernet@70000 { status = "okay"; - pinctrl-0 = <&pmx_ge0_rgmii>; + pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; phy = <&phy1>; phy-mode = "rgmii-id"; }; ethernet@74000 { - pinctrl-0 = <&pmx_ge1_rgmii>; + pinctrl-0 = <&ge1_rgmii_pins>; pinctrl-names = "default"; status = "okay"; phy = <&phy0>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bdb36a05c039..a2a6451524dc 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -212,7 +212,7 @@ }; &pinctrl { - pmx_ge0_gmii: pmx-ge0-gmii { + ge0_gmii_pins: ge0-gmii-pins { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", @@ -223,7 +223,7 @@ marvell,function = "ge0"; }; - pmx_ge0_rgmii: pmx-ge0-rgmii { + ge0_rgmii_pins: ge0-rgmii-pins { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", @@ -231,7 +231,7 @@ marvell,function = "ge0"; }; - pmx_ge1_rgmii: pmx-ge1-rgmii { + ge1_rgmii_pins: ge1-rgmii-pins { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17", "mpp18", "mpp19", -- cgit v1.2.3 From 388c44a379f7f5832a3e7b39a41cc2b68f937021 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 27 Nov 2014 02:43:39 +0900 Subject: Documentation: devicetree: Add Exynos-based boards compatible string This patch adds the missing compatible/description of Exynos-based boards to remove following build warning. WARNING: DT compatible string "samsung,..." appears un-documented -- check ./Documentation/devicetree/bindings/ Signed-off-by: Chanwoo Choi Signed-off-by: Kukjin Kim --- .../devicetree/bindings/arm/samsung-boards.txt | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt index 2168ed31e1b0..1f8287ea5cc7 100644 --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt @@ -1,11 +1,19 @@ -* Samsung's Exynos4210 based SMDKV310 evaluation board - -SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC. +* Samsung's Exynos SoC based boards Required root node properties: - compatible = should be one or more of the following. - (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. - (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. + - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board. + - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. + - "samsung,trats" - for Exynos4210-based Tizen Reference board. + - "samsung,universal_c210" - for Exynos4210-based Samsung board. + - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board. + - "samsung,trats2" - for Exynos4412-based Tizen Reference board. + - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board. + - "samsung,xyref5260" - for Exynos5260-based Samsung board. + - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. + - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. + - "samsung,sd5v1" - for Exynos5440-based Samsung board. + - "samsung,ssdk5440" - for Exynos5440-based Samsung board. Optional: - firmware node, specifying presence and type of secure firmware: -- cgit v1.2.3 From e0cefb3f79d375c58150c78d6bfe665f999d9d85 Mon Sep 17 00:00:00 2001 From: Youngjun Cho Date: Thu, 27 Nov 2014 02:43:39 +0900 Subject: ARM: dts: add board dts file for Exynos3250-based Monk board This patch adds new board dts file to support Samsung Monk board which is based on Exynos3250 SoC and has different H/W configuration from Rinato. This dts file support following features: - eMMC - Main PMIC (Samsung S2MPS14) - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) - RTC of Exynos3250 - ADC of Exynos3250 with NTC thermistor - I2S of Exynos3250 - TMU of Exynos3250 - Secure firmware for Exynos3250 secondary cpu boot - Serial ports of Exynos3250 - gpio-key for power key Signed-off-by: Youngjun Cho Signed-off-by: Chanwoo Choi Signed-off-by: Inki Dae Signed-off-by: Seung-Woo Kim Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- .../devicetree/bindings/arm/samsung-boards.txt | 1 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/exynos3250-monk.dts | 579 +++++++++++++++++++++ 3 files changed, 582 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/exynos3250-monk.dts diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt index 1f8287ea5cc7..43589d2466a7 100644 --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt @@ -2,6 +2,7 @@ Required root node properties: - compatible = should be one or more of the following. + - "samsung,monk" - for Exynos3250-based Samsung Simband board. - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board. - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. - "samsung,trats" - for Exynos4210-based Tizen Reference board. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 91cd4d08b7f1..0e4839ea6cc1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -67,7 +67,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb -dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \ +dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ + exynos3250-rinato.dtb \ exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts new file mode 100644 index 000000000000..24822aa98057 --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -0,0 +1,579 @@ +/* + * Samsung's Exynos3250 based Monk board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Monk board which is based on + * Samsung Exynos3250 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos3250.dtsi" +#include + +/ { + model = "Samsung Monk board"; + compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + i2c7 = &i2c_max77836; + }; + + memory { + reg = <0x40000000 0x1ff00000>; + }; + + firmware@0205F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0205F000 0x1000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power_key { + interrupt-parent = <&gpx2>; + interrupts = <7 0>; + gpios = <&gpx2 7 1>; + linux,code = ; + label = "power key"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + vemmc_reg: voltage-regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "V_EMMC_2.8V-fixed"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 0>; + enable-active-high; + }; + + i2c_max77836: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 2 0>, <&gpd0 3 0>; + #address-cells = <1>; + #size-cells = <0>; + + max77836: subpmic@25 { + compatible = "maxim,max77836"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + reg = <0x25>; + wakeup; + + muic: max77836-muic { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + safeout_reg: SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <45000>; + regulator-max-microamp = <475000>; + regulator-boot-on; + }; + + motor_reg: LDO1 { + regulator-name = "MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + }; + + LDO2 { + regulator-name = "UNUSED_LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + assigned-clocks = <&cmu CLK_SCLK_TSADC>; + assigned-clock-rates = <6000000>; + + thermistor-ap { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <100000>; + io-channels = <&adc 0>; + }; + + thermistor-battery { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <100000>; + io-channels = <&adc 1>; + }; +}; + +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; + + s2mps14_pmic@66 { + compatible = "samsung,s2mps14-pmic"; + interrupt-parent = <&gpx0>; + interrupts = <7 0>; + reg = <0x66>; + wakeup; + + s2mps14_osc: clocks { + compatible = "samsung,s2mps14-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps14_ap", "unused", + "s2mps14_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VAP_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VAP_M1_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VCC_AP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VAP_AVDD_PLL1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VAP_PLL_ISO_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VAP_MIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VAP_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VAP_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "V_LPDDR_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "UNUSED_LDO10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo11_reg: LDO11 { + regulator-name = "V_EMMC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + ldo12_reg: LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VSENSOR_2.85V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "UNUSED_LDO14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "LCD_VDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "UNUSED_LDO17"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "UNUSED_LDO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "LCD_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "UNUSED_LDO21"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "UNUSED_LDO22"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "UNUSED_LDO23"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "UNUSED_LDO24"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "UNUSED_LDO25"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VAP_MIF_1.0V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VAP_ARM_1.0V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VAP_INT3D_1.0V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VCC_SUB_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_1 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max77836-battery"; + interrupt-parent = <&gpx1>; + interrupts = <2 8>; + reg = <0x36>; + }; +}; + +&i2s2 { + status = "okay"; +}; + +&mshc_0 { + #address-cells = <1>; + #size-cells = <0>; + num-slots = <1>; + broken-cd; + non-removable; + cap-mmc-highspeed; + desc-num = <4>; + mmc-hs200-1_8v; + card-detect-delay = <200>; + vmmc-supply = <&vemmc_reg>; + clock-frequency = <100000000>; + clock-freq-min-max = <400000 100000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + status = "okay"; +}; + +&serial_0 { + assigned-clocks = <&cmu CLK_SCLK_UART0>; + assigned-clock-rates = <100000000>; + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&tmu { + vtmu-supply = <&ldo7_reg>; + status = "okay"; +}; + +&rtc { + clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; + clock-names = "rtc", "rtc_src"; + status = "okay"; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-state { + PIN_SLP(gpa0-0, INPUT, DOWN); + PIN_SLP(gpa0-1, INPUT, DOWN); + PIN_SLP(gpa0-2, INPUT, DOWN); + PIN_SLP(gpa0-3, INPUT, DOWN); + PIN_SLP(gpa0-4, INPUT, DOWN); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, DOWN); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, PREV, NONE); + PIN_SLP(gpb-1, PREV, NONE); + PIN_SLP(gpb-2, PREV, NONE); + PIN_SLP(gpb-3, PREV, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, DOWN); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, DOWN); + PIN_SLP(gpc1-1, INPUT, DOWN); + PIN_SLP(gpc1-2, INPUT, DOWN); + PIN_SLP(gpc1-3, INPUT, DOWN); + PIN_SLP(gpc1-4, INPUT, DOWN); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, INPUT, DOWN); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, NONE); + PIN_SLP(gpd1-1, INPUT, NONE); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + sleep1: sleep-state { + PIN_SLP(gpe0-0, PREV, NONE); + PIN_SLP(gpe0-1, PREV, NONE); + PIN_SLP(gpe0-2, INPUT, DOWN); + PIN_SLP(gpe0-3, INPUT, DOWN); + PIN_SLP(gpe0-4, PREV, NONE); + PIN_SLP(gpe0-5, INPUT, DOWN); + PIN_SLP(gpe0-6, INPUT, DOWN); + PIN_SLP(gpe0-7, INPUT, DOWN); + + PIN_SLP(gpe1-0, INPUT, DOWN); + PIN_SLP(gpe1-1, PREV, NONE); + PIN_SLP(gpe1-2, INPUT, DOWN); + PIN_SLP(gpe1-3, INPUT, DOWN); + PIN_SLP(gpe1-4, INPUT, DOWN); + PIN_SLP(gpe1-5, INPUT, DOWN); + PIN_SLP(gpe1-6, INPUT, DOWN); + PIN_SLP(gpe1-7, INPUT, NONE); + + PIN_SLP(gpe2-0, INPUT, NONE); + PIN_SLP(gpe2-1, INPUT, NONE); + PIN_SLP(gpe2-2, INPUT, NONE); + + PIN_SLP(gpk0-0, INPUT, DOWN); + PIN_SLP(gpk0-1, INPUT, DOWN); + PIN_SLP(gpk0-2, OUT0, NONE); + PIN_SLP(gpk0-3, INPUT, DOWN); + PIN_SLP(gpk0-4, INPUT, DOWN); + PIN_SLP(gpk0-5, INPUT, DOWN); + PIN_SLP(gpk0-6, INPUT, DOWN); + PIN_SLP(gpk0-7, INPUT, DOWN); + + PIN_SLP(gpk1-0, PREV, NONE); + PIN_SLP(gpk1-1, PREV, NONE); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, DOWN); + PIN_SLP(gpl0-2, INPUT, DOWN); + PIN_SLP(gpl0-3, INPUT, DOWN); + + PIN_SLP(gpm0-0, INPUT, DOWN); + PIN_SLP(gpm0-1, INPUT, DOWN); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, DOWN); + PIN_SLP(gpm1-3, INPUT, DOWN); + PIN_SLP(gpm1-4, INPUT, DOWN); + PIN_SLP(gpm1-5, INPUT, DOWN); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, DOWN); + PIN_SLP(gpm2-1, INPUT, DOWN); + PIN_SLP(gpm2-2, INPUT, DOWN); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, INPUT, DOWN); + PIN_SLP(gpm3-1, INPUT, DOWN); + PIN_SLP(gpm3-2, INPUT, DOWN); + PIN_SLP(gpm3-3, INPUT, DOWN); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, INPUT, DOWN); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, INPUT, DOWN); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, INPUT, DOWN); + PIN_SLP(gpm4-5, INPUT, DOWN); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + }; +}; -- cgit v1.2.3 From bd316f5ffc94244c4e3870c6b90dd29d3c6f2c74 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 27 Nov 2014 02:43:39 +0900 Subject: ARM: dts: Remove unused bootargs from exynos3250-rinato This patch removes unused dt node of command line from Exynos3250-based Rinato board because kernel use the command line from bootloader. Signed-off-by: Chanwoo Choi Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250-rinato.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 84380fa13e37..80aa8b4c4a3d 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -28,10 +28,6 @@ reg = <0x40000000 0x1ff00000>; }; - chosen { - bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p15 rootwait earlyprintk panic=5"; - }; - firmware@0205F000 { compatible = "samsung,secure-firmware"; reg = <0x0205F000 0x1000>; -- cgit v1.2.3 From 1888eb75e68caceaab2fe0db820bd6ed574a468f Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Thu, 27 Nov 2014 03:24:45 +0900 Subject: ARM: dts: add sysreg phandle to i2c device nodes for exynos This patch adds syscon based phandle to i2c device nodes of exynos5250 and exynos5420. These phandles will be used to save restore i2c sysreg configuration register during s2r from i2c driver. CC: Rob Herring CC: Randy Dunlap CC: Russell King CC: devicetree@vger.kernel.org CC: linux-doc@vger.kernel.org Signed-off-by: Pankaj Dubey Signed-off-by: Kukjin Kim --- Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt | 1 + arch/arm/boot/dts/exynos5250.dtsi | 4 ++++ arch/arm/boot/dts/exynos5420.dtsi | 4 ++++ 3 files changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt index 278de8e64bbf..89b3250f049b 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt @@ -32,6 +32,7 @@ Optional properties: specified, default value is 0. - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not specified, the default value in Hz is 100000. + - samsung,sysreg-phandle - handle to syscon used to control the system registers Example: diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 012b0211afed..6a32d50070c1 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -293,6 +293,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; @@ -306,6 +307,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; @@ -319,6 +321,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; @@ -332,6 +335,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 8617a031cbc0..90bf4011e319 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -560,6 +560,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; @@ -573,6 +574,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; @@ -586,6 +588,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; @@ -599,6 +602,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_bus>; + samsung,sysreg-phandle = <&sysreg_system_controller>; status = "disabled"; }; -- cgit v1.2.3 From fb026d3de33b317202838d10bc77cf8ca6e8af3b Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Wed, 1 Oct 2014 15:45:28 +0200 Subject: ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This has been successfully tested on Netgear R6250 and two other development (unnamed) devices, all of them BCM4708 based. We also got a possitive feedback from R7000 (BCM4709) tester. Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/bcm5301x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 53c624f766b4..6d80922ce747 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -8,6 +8,7 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include #include #include #include "skeleton.dtsi" @@ -92,4 +93,19 @@ clock-frequency = <400000000>; }; }; + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + chipcommon: chipcommon@0 { + reg = <0x00000000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; }; -- cgit v1.2.3 From dd6d2e5f4bbb828268506e9d6b772fffe101e76c Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Wed, 1 Oct 2014 15:45:29 +0200 Subject: ARM: BCM5301X: Add LEDs for Netgear R6250 V1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 34 +++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 3b5259de5a38..58d999d79124 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -32,4 +32,38 @@ status = "okay"; }; }; + + leds { + compatible = "gpio-leds"; + + logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; }; -- cgit v1.2.3 From 3db5894beb21df6ee11dfcafc070f1abd4cdf27d Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Sun, 23 Nov 2014 16:19:35 +0000 Subject: ARM: dts: rockchip: add label property for leds on Radxa Rock The leds-gpio driver recently switched to the device property API. The device_node name is no longer retrieved if the "label" devicetree property is not found. In this case the driver tries to create entries with (null) name in /sys/class/leds, which is wrong and generates backtrace as several gpio_leds have the same name. Also renamed subnode "yellow" to "blue" to match the last schematics updates. Signed-off-by: Romain Perier Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188-radxarock.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 6eb62c053055..9a09579b8309 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -43,16 +43,19 @@ compatible = "gpio-leds"; green { + label = "rock:green:user1"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; default-state = "off"; }; - yellow { + blue { + label = "rock:blue:user2"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "off"; }; sleep { + label = "rock:red:power"; gpios = <&gpio0 15 0>; default-state = "off"; }; -- cgit v1.2.3 From 4c1e3ff74d08daf27811112af9f6560c3a6415f1 Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Fri, 28 Nov 2014 11:24:14 +0100 Subject: ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188 The SDMMC, SDIO and EMMC controllers use an external FIFO whose size is 256x32bit. This patch set the corresponding fifo-depth properties for both RK3066 and RK3188. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3xxx.dtsi | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 87df6a8955aa..c54a9715dcfa 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -177,10 +177,9 @@ compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; interrupts = ; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; - + fifo-depth = <256>; status = "disabled"; }; @@ -188,10 +187,9 @@ compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10218000 0x1000>; interrupts = ; - clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; clock-names = "biu", "ciu"; - + fifo-depth = <256>; status = "disabled"; }; @@ -199,10 +197,9 @@ compatible = "rockchip,rk2928-dw-mshc"; reg = <0x1021c000 0x1000>; interrupts = ; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; clock-names = "biu", "ciu"; - + fifo-depth = <256>; status = "disabled"; }; -- cgit v1.2.3 From 6eb48c818d352fcd6fcae7b878b01d2fd8c17eb6 Mon Sep 17 00:00:00 2001 From: Andreas Färber Date: Wed, 12 Nov 2014 14:51:16 +0100 Subject: Documentation: devicetree: Fix Xilinx VDMA specification MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The specification requires xlnx,data-width, but example and driver use xlnx,datawidth. Change the specification to match the implementation. Reviewed-by: Michal Simek Fixes: eebeac03db93 ("dma: Add Xilinx Video DMA DT Binding Documentation") Signed-off-by: Andreas Färber Reviewed-by: Soren Brinkmann Signed-off-by: Michal Simek --- Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index 1405ed071bb4..e4c4d47f8137 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -25,7 +25,7 @@ Required child node properties: - compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or "xlnx,axi-vdma-s2mm-channel". - interrupts: Should contain per channel VDMA interrupts. -- xlnx,data-width: Should contain the stream data width, take values +- xlnx,datawidth: Should contain the stream data width, take values {32,64...1024}. Optional child node properties: -- cgit v1.2.3 From d86e3104e8066a5412ad3f9790592477a947a77e Mon Sep 17 00:00:00 2001 From: Peter Crosthwaite Date: Mon, 1 Dec 2014 10:25:48 +1000 Subject: doc: dt: vendor-prefixes: Add Digilent Inc Digilent is a board designer, making various Linux capabable FPGA and processor boards. Add to the vendor list. Acked-by: Soren Brinkmann Signed-off-by: Peter Crosthwaite Signed-off-by: Michal Simek --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 723999d73744..c6f934d69d48 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -40,6 +40,7 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor) davicom DAVICOM Semiconductor, Inc. denx Denx Software Engineering digi Digi International Inc. +digilent Diglent, Inc. dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG -- cgit v1.2.3 From 8c7634c0ee4e2b62a361cc0285418e201d162f37 Mon Sep 17 00:00:00 2001 From: Peter Crosthwaite Date: Mon, 1 Dec 2014 10:25:49 +1000 Subject: arm: dts: zynq: Move crystal freq. to board level The fact that all supported boards use the same 33MHz crystal is a co-incidence. The Zynq PS support a range of crystal freqs so the hardcoded setting should be removed from the dtsi. Re-implement it on the board level. This prepares support for Zynq boards with different crystal frequencies (e.g. the Digilent ZYBO). Acked-by: Soren Brinkmann Signed-off-by: Peter Crosthwaite Signed-off-by: Michal Simek --- arch/arm/boot/dts/zynq-7000.dtsi | 1 - arch/arm/boot/dts/zynq-parallella.dts | 4 ++++ arch/arm/boot/dts/zynq-zc702.dts | 4 ++++ arch/arm/boot/dts/zynq-zc706.dts | 4 ++++ arch/arm/boot/dts/zynq-zed.dts | 4 ++++ 5 files changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 24036c440440..f8e4a28adfc0 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -244,7 +244,6 @@ clkc: clkc@100 { #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; - ps-clk-frequency = <33333333>; fclk-enable = <0>; clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index e1f51ca127fe..538a40a32eb4 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -34,6 +34,10 @@ }; }; +&clkc { + ps-clk-frequency = <33333333>; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 94e2cda6f9b6..280f02dd4ddc 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -42,6 +42,10 @@ status = "okay"; }; +&clkc { + ps-clk-frequency = <33333333>; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index a8bbdfbc7093..34f7812d2ee8 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -29,6 +29,10 @@ }; +&clkc { + ps-clk-frequency = <33333333>; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 697779a353ed..1c7cc990b47a 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -29,6 +29,10 @@ }; +&clkc { + ps-clk-frequency = <33333333>; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; -- cgit v1.2.3 From 7b01abb06c997e5431cdfc62267449aaef1d77c7 Mon Sep 17 00:00:00 2001 From: Peter Crosthwaite Date: Mon, 1 Dec 2014 10:25:50 +1000 Subject: arm: dts: zynq: Add Digilent ZYBO board Add a DTS describing the Digilent ZYBO board. Similar to ZED but with a 50MHz crystal instead of 33MHz. Acked-by: Soren Brinkmann Signed-off-by: Peter Crosthwaite Signed-off-by: Michal Simek --- arch/arm/boot/dts/Makefile | 3 ++- arch/arm/boot/dts/zynq-zybo.dts | 52 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/zynq-zybo.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..db51dbda5537 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -489,7 +489,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-parallella.dtb \ zynq-zc702.dtb \ zynq-zc706.dtb \ - zynq-zed.dtb + zynq-zed.dtb \ + zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ armada-370-mirabox.dtb \ diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts new file mode 100644 index 000000000000..a9a12ce5023b --- /dev/null +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq ZYBO Development Board"; + compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + }; + +}; + +&clkc { + ps-clk-frequency = <50000000>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; -- cgit v1.2.3 From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 24 Sep 2014 23:50:07 +0200 Subject: ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file IRQ support for Broadcom's bus-axi driver bcma was merged into John Linville's wireless tree and will show up in 3.19. This patch makes use of this feature in the DTS file for the the BCM5301X SoCs. I left the PCIe controller out, because this still needs some discussion. Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 6d80922ce747..b7c4e9e53cee 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -101,6 +101,40 @@ #address-cells = <1>; #size-cells = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* ChipCommon */ + <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 2.0 Controller */ + <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 3.0 Controller */ + <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 0 */ + <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 2 */ + <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 3 */ + <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + + /* NAND Controller */ + <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + chipcommon: chipcommon@0 { reg = <0x00000000 0x1000>; -- cgit v1.2.3 From 288ce4a8b67795543c69ca6c52f429de24036296 Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Mon, 1 Dec 2014 18:37:26 +0000 Subject: ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard vsys is the core always-on supply of the Marsboard. Signed-off-by: Romain Perier Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a-marsboard.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 57489ee54022..0a7304beb417 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -60,6 +60,14 @@ startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; + + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; }; &i2c1 { @@ -72,8 +80,14 @@ interrupt-parent = <&gpio6>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + vcc1-supply = <&vsys>; + vcc2-supply = <&vsys>; + vcc3-supply = <&vsys>; + vcc4-supply = <&vsys>; vcc5-supply = <&vcc_io>; vcc6-supply = <&vcc_io>; + vcc7-supply = <&vsys>; + vccio-supply = <&vsys>; regulators { vcc_rtc: regulator@0 { -- cgit v1.2.3 From f6f8234439737171e571a41264280e844a429699 Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Sun, 30 Nov 2014 18:28:29 +0100 Subject: ARM: BCM5301X: Add buttons for Netgear R6250 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 25 +++++++++++++++++++++++++ arch/arm/boot/dts/bcm5301x.dtsi | 1 + 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 58d999d79124..4ed7de1058b7 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -66,4 +66,29 @@ linux,default-trigger = "default-off"; }; }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <200>; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index b7c4e9e53cee..78aec6270c2f 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -9,6 +9,7 @@ */ #include +#include #include #include #include "skeleton.dtsi" -- cgit v1.2.3 From 302a5ef29d497449280422576a1b55c72fc0ba4c Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Thu, 4 Dec 2014 10:22:02 +0100 Subject: ARM: BCM5301X: Add DT for Netgear R6300 V2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/Makefile | 4 +- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 84 ++++++++++++++++++++++++++ 2 files changed, 87 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..66c3198da4f9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -54,7 +54,9 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb +dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-netgear-r6250.dtb \ + bcm4708-netgear-r6300-v2.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts new file mode 100644 index 000000000000..12fc2a01e6ab --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -0,0 +1,84 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R6300 V2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "netgear,r6300v2", "brcm,bcm4708"; + model = "Netgear R6300 V2 (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <200>; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; -- cgit v1.2.3 From e336a14d2a2aa4431a8acc9eb3305b37f26fb696 Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Thu, 4 Dec 2014 10:22:58 +0100 Subject: ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 64 +++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 66c3198da4f9..30d6d954cba7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts new file mode 100644 index 000000000000..5fc0fae03092 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -0,0 +1,64 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-1750DHP + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708"; + model = "Buffalo WZR-1750DHP (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <200>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + aoss { + label = "AOSS"; + linux,code = ; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + mode { + label = "Mode"; + linux,code = ; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + sw_ap { + label = "AP"; + linux,code = ; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; -- cgit v1.2.3 From ae2ed35a40007bf737da452df7081a453bf89ce3 Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Thu, 4 Dec 2014 10:23:33 +0100 Subject: ARM: BCM5301X: Add DT for Asus RT-N18U MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 78 +++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm47081.dtsi | 26 ++++++++++ 3 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts create mode 100644 arch/arm/boot/dts/bcm47081.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30d6d954cba7..d4b5bd618a7f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -57,7 +57,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-netgear-r6250.dtb \ - bcm4708-netgear-r6300-v2.dtb + bcm4708-netgear-r6300-v2.dtb \ + bcm47081-asus-rt-n18u.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts new file mode 100644 index 000000000000..fb76378bd511 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -0,0 +1,78 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-N18U + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708"; + model = "Asus RT-N18U (BCM47081)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <200>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi new file mode 100644 index 000000000000..f720012ee5ed --- /dev/null +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -0,0 +1,26 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for BCM47081 SoC. + * + * Copyright © 2014 RafaÅ‚ MiÅ‚ecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcm5301x.dtsi" + +/ { + compatible = "brcm,bcm47081"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; +}; -- cgit v1.2.3 From dd7733da69f198f576d7f52f6bc5a860fe24930d Mon Sep 17 00:00:00 2001 From: RafaÅ‚ MiÅ‚ecki Date: Thu, 4 Dec 2014 10:24:02 +0100 Subject: ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 57 ++++++++++++++++++++++ 2 files changed, 59 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d4b5bd618a7f..7f069de47cae 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -58,7 +58,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb \ - bcm47081-asus-rt-n18u.dtb + bcm47081-asus-rt-n18u.dtb \ + bcm47081-buffalo-wzr-600dhp2.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts new file mode 100644 index 000000000000..bbb414fbad65 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -0,0 +1,57 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-600DHP2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708"; + model = "Buffalo WZR-600DHP2 (BCM47081)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <200>; + + aoss { + label = "AOSS"; + linux,code = ; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + /* Switch device mode? */ + mode { + label = "Mode"; + linux,code = ; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; -- cgit v1.2.3 From 08bcc754c380da2c99efd61d687de033e1142fbb Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 4 Dec 2014 23:33:38 -0800 Subject: Revert "ARM: dts: rockchip: temporarily disable smp on rk3288" We now have the physical-timers patches lined up as a dependency in this same branch, so we can revert the temporary disablement. This reverts commit b77d43943ea83997c6c37b8831d1561981d499c5. Signed-off-by: Olof Johansson --- arch/arm/boot/dts/rk3288.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index acb6a2fba183..8313077b75a7 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -47,6 +47,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; rockchip,pmu = <&pmu>; cpu0: cpu@500 { -- cgit v1.2.3 From e2405a59e54856460468c80ea92ee3dce35c2c86 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 25 Nov 2014 10:54:00 -0800 Subject: ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured This will enable use of physical arch timers on rk3288, where each core comes out of reset with a different virtual offset. Using physical timers will help with SMP booting on coreboot and older u-boot and should also allow suspend-resume and cpu-hotplug to work on all firmwares. Firmware which does initialize the cpu registers properly at boot and cpu-hotplug can remove this property from the device tree. Signed-off-by: Sonny Rao Signed-off-by: Olof Johansson --- arch/arm/boot/dts/rk3288.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 8313077b75a7..fd19f00784bd 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -141,6 +141,7 @@ timer { compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; interrupts = , , , -- cgit v1.2.3