summaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_core.c
AgeCommit message (Collapse)AuthorFilesLines
2017-04-12Bluetooth: Change initial min and max intervalJonas Holmberg1-2/+2
Use the initial connection interval recommended in Bluetooth Specification v4.2 (30ms - 50ms). Signed-off-by: Jonas Holmberg <jonashg@axis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix wrong New Settings event when closing HCI User ChannelMarcel Holtmann1-0/+1
When closing HCI User Channel, the New Settings event was send out to inform about changed settings. However such event is wrong since the exclusive HCI User Channel access is active until the Index Added event has been sent. @ USER Close: test @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections = Close Index: 00:14:EF:22:04:12 @ MGMT Event: Index Added (0x0004) plen 0 Calling __mgmt_power_off from hci_dev_do_close requires an extra check for an active HCI User Channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-18Bluetooth: Add debugfs fields for hardware and firmware infoMarcel Holtmann1-0/+24
Some Bluetooth controllers allow for reading hardware and firmware related vendor specific infos. If they are available, then they can be exposed via debugfs now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann1-15/+13
The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-05-13Bluetooth: fix power_on vs close raceJiri Slaby1-2/+2
With all the latest fixes applied, I am still able to reproduce this (and other) warning(s): WARNING: CPU: 1 PID: 19684 at ../kernel/workqueue.c:4092 destroy_workqueue+0x70a/0x770() ... Call Trace: [<ffffffff819fee81>] ? dump_stack+0xb3/0x112 [<ffffffff8117377e>] ? warn_slowpath_common+0xde/0x140 [<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770 [<ffffffff811739ae>] ? warn_slowpath_null+0x2e/0x40 [<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770 [<ffffffffa0c944c9>] ? hci_unregister_dev+0x2a9/0x720 [bluetooth] [<ffffffffa0b301db>] ? vhci_release+0x7b/0xf0 [hci_vhci] [<ffffffffa0b30160>] ? vhci_flush+0x50/0x50 [hci_vhci] [<ffffffff8117cd73>] ? do_exit+0x863/0x2b90 This is due to race present in the hci_unregister_dev path. hdev->power_on work races with hci_dev_do_close. One tries to open, the other tries to close, leading to warning like the above. (Another example is a warning in kobject_get or kobject_put depending on who wins the race.) Fix this by switching those two racers to ensure hdev->power_on never triggers while hci_dev_do_close is in progress. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_core: cancel power off delayed work properlyWei-Ning Huang1-0/+1
When the HCI_AUTO_OFF flag is cleared, the power_off delayed work need to be cancel or HCI will be powered off even if it's managed. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: Use managed version of led_trigger_register in LED triggerHeiner Kallweit1-2/+0
Recently a managed version of led_trigger_register was introduced. Using devm_led_trigger_register allows to simplify the LED trigger code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: add LED trigger for indicating HCI is powered upHeiner Kallweit1-0/+8
Add support for LED triggers to the Bluetooth subsystem and add kernel config symbol BT_LEDS for it. For now one trigger for indicating "HCI is powered up" is supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-20Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skbDouglas Anderson1-2/+4
In commit 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") we squashed down the size of the structure by using a union with the assumption that all users would use the flag to determine whether we had a req_complete or a req_complete_skb. Unfortunately we had a case in hci_req_cmd_complete() where we weren't looking at the flag. This can result in a situation where we might be storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or vice versa. During some testing I found at least one case where the function hci_req_sync_complete() was called improperly because the kernel thought that it didn't require an SKB. Looking through the stack in kgdb I found that it was called by hci_event_packet() and that hci_event_packet() had both of its locals "req_complete" and "req_complete_skb" pointing to the same place: both to hci_req_sync_complete(). Let's make sure we always check the flag. For more details on debugging done, see <http://crbug.com/588288>. Fixes: 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-20Bluetooth: use list_for_each_entry*Geliang Tang1-5/+3
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Clean up current advertising instance trackingJohan Hedberg1-4/+8
We can simplify a lot of code by making sure hdev->cur_adv_instance is always up-to-date. This allows e.g. the removal of the get_current_adv_instance() helper function and the special HCI_ADV_CURRENT value. This patch also makes selecting instance 0x00 explicit in the various calls where advertising instances aren't enabled, e.g. when HCI_ADVERTISING is set or we've just finished enabling LE. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Perform HCI update for power on synchronouslyJohan Hedberg1-5/+16
The request to update HCI during power on is always coming either from hdev->req_workqueue or through an ioctl, so it's safe to use hci_req_sync for it. This way we also eliminate potential races with incoming mgmt commands or other actions while powering on. Part of this refactoring is the splitting of mgmt_powered() into mgmt_power_on() and __mgmt_power_off() functions. The main reason is the different requirements as far as hdev locking is concerned, as highlighted with the __ prefix of the power off API. Since the power on in the case of clearing the AUTO_OFF flag cannot be done synchronously in the set_powered mgmt handler, the hci_power_on work callback is extended to cover this (which also simplifies the set_powered helper a lot). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable timeout behind hdev->req_workqueueJohan Hedberg1-13/+0
Since the other discoverable changes are behind req_workqueue now it only makes sense to move the discoverable timeout there as well. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move advertising instance management to hci_request.cJohan Hedberg1-18/+1
This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Clean up hci_core codePrasanna Karthik1-3/+4
Fix errors reported by checkpatch. - ERROR: spaces required around that ':' (ctx:VxW) - ERROR: open brace '{' following function declarations go on the next line Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Simplify request cleanup codeJohan Hedberg1-3/+1
The hci_req_sync_cancel() is just as much related to the request cleanup as hci_request_cancel_all() is. Just move the former into the latter and do the cleanup from a single place in hci_dev_do_close(). The important thing is to avoid deadlocks by holding the req_sync lock: previously hci_request_cancel_all was done right after releasing the lock and with this patch it's right before taking it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add error return value to hci_req_sync callbackJohan Hedberg1-13/+32
In some circumstances it may be useful to abort the request through checks done in the request callback. To make the feature possible this patch changes the return value of the request callback from void to int and aborts the request if a non-zero value is returned. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Move LE scan disable/restart behind req_workqueueJohan Hedberg1-168/+0
To avoid any risks of races, place also these LE scan modification work callbacks behind the same work queue as the other LE scan changes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add HCI status return parameter to hci_req_sync()Johan Hedberg1-13/+13
In some cases it may be important to get the exact HCI status rather than the converted HCI-to-errno value. Add an optional return parameter to the hci_req_sync() API to allow for this. Since there are no good HCI translation candidates for cancelation and timeout, use the "unknown" status code for those cases. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add stubs for synchronous HCI request functionalityJohan Hedberg1-0/+4
Prepare hci_request.c to have code for doing synchronous HCI requests, such as LE scanning or advertising changes. The necessary work callbacks will be set up in hci_request_setup() and cleaned up in hci_request_cancel_all(). The former is used when an HCI device get registered, and the latter each time it is powered off (or unregistered). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add 'sync' specifier to synchronous request APIsJohan Hedberg1-14/+14
To make it clear which HCI request APIs target specifically synchronous requests, add 'sync' to the API names. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Move synchronous request handling into hci_request.cJohan Hedberg1-193/+0
hci_request.c is a more natural place for the synchronous request handling. Furthermore, we will soon need access to some of the previously private-to-hci_core.c functions from hci_request.c. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Remove unnecessary call to hci_update_background_scanJohan Hedberg1-3/+1
The hci_conn_params_clear_all() function is only called from hci_unregister_dev() at which point it's completely futile to try to do any LE scanning updates. Simply remove this unnecessary function call. At the same time we can make the function static since it's only accessed from within the same c-file. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Compress the size of struct hci_ctrlJohan Hedberg1-7/+7
We can reduce the size of the hci_ctrl struct by converting 'bool req_start' to 'u8 req_flags' and making the two function pointers a union (since only one is ever set at a time). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Use new hci_skb_pkt_* wrappers for core packet handlingMarcel Holtmann1-11/+12
The new hci_skb_pkt_* wrappers only help if they are used consistently in the Bluetooth subsystem. So first convert the core packet handling. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Make LE only events conditional on supported commandsMarcel Holtmann1-4/+18
For the LE only controllers, there are events that should not be enabled if the corresponding command is not supported. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Fix issue with HCI_QUIRK_FIXUP_INQUIRY_MODE and event maskMarcel Holtmann1-1/+2
When setting the event mask, the HCI_QUIRK_FIXUP_INQUIRY_MODE quirk is required to be checked so that the Inquiry Result with RSSI event gets actually enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Build LE event mask based on supported commandsMarcel Holtmann1-1/+28
The LE event mask should be created based on the commands that are actually supported by the controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Move BR/EDR default events behind its featuresMarcel Holtmann1-4/+8
There are some BR/EDR default events for Bluetooth 1.2 or later controllers that are not conditional on their features being present. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-05Bluetooth: Check for supported white list before issuing commandsMarcel Holtmann1-6/+11
The white list commands might not be implemented if the controller does not actually support the white list. So check the supported commands first before issuing these commands. Not supporting the white list is the same as supporting a white list with zero size. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Replace hci_notify with hci_sock_dev_eventMarcel Holtmann1-16/+9
There is no point in wrapping hci_sock_dev_event around hci_notify. It is an empty wrapper which adds no value. So remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Rename bt_cb()->req into bt_cb()->hciMarcel Holtmann1-9/+9
The SKB context buffer for HCI request is really not just for requests, information in their are preserved for the whole HCI layer. So it makes more sense to actually rename it into bt_cb()->hci and also call it then struct hci_ctrl. In addition that allows moving the decoded opcode for outgoing packets into that struct. So far it was just consuming valuable space from the main shared items. And opcode are not valid for L2CAP packets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Remove unnecessary hci_explicit_connect_lookup functionJohan Hedberg1-17/+0
There's only one user of this helper which can be replaces with a call to hci_pend_le_action_lookup() and a check for params->explicit_connect. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21Bluetooth: Introduce driver specific post init callbackMarcel Holtmann1-1/+4
Some drivers might have to restore certain settings after the init procedure has been completed. This driver callback allows them to hook into that stage. This callback is run just before the controller is declared as powered up. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Add support setup stage internal notification eventMarcel Holtmann1-0/+2
Before the vendor specific setup stage is triggered call back into the core to trigger an internal notification event. That event is used to send an index update to the monitor interface. With that specific event it is possible to update userspace with manufacturer information before any HCI command has been executed. This is useful for early stage debugging of vendor specific initialization sequences. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Add new quirk for non-persistent diagnostic settingsMarcel Holtmann1-0/+19
If the diagnostic settings are not persistent over HCI Reset, then this quirk can be used to tell the Bluetoth core about it. This will ensure that the settings are programmed correctly when the controller is powered up. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: Queue diagnostic messages together with HCI packetsMarcel Holtmann1-4/+5
Sending diagnostic messages directly to the monitor socket might cause issues for devices processing their messages in interrupt context. So instead of trying to directly forward them, queue them up with the other HCI packets and lets them be processed by the sockets at the same time. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+0
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16Bluetooth: Fix LE reconnection logicJohan Hedberg1-7/+0
We can't use hci_explicit_connect_lookup() since that would only cover explicit connections, leaving normal reconnections completely untouched. Not using it in turn means leaving out entries in pend_le_reports. To fix this and simplify the logic move conn params from the reports list to the pend_le_conns list for the duration of an explicit connect. Once the connect is complete move the params back to the pend_le_reports list. This also means that the explicit connect lookup function only needs to look into the pend_le_conns list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08Bluetooth: Fix basic debugfs entries for unconfigured controllersMarcel Holtmann1-14/+15
When the controller is unconfigured (for example it does not have a valid Bluetooth address), then the basic debugfs entries for dut_mode and vendor_diag are not creates. Ensure they are created in __hci_init and also __hci_unconf_init functions. One of them is called during setup stage of a new controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08Bluetooth: Enforce packet types in hci_recv_frame driver functionMarcel Holtmann1-0/+7
When calling the hci_recv_frame driver function check for valid packet types that the core should process. This should catch issues with drivers trying to feed vendor packet types through this interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08Bluetooth: Fix interaction of HCI_QUIRK_RESET_ON_CLOSE and HCI_AUTO_OFFMarcel Holtmann1-7/+8
When the controller requires the HCI Reset command to be send when closing the transport, the HCI_AUTO_OFF needs to be accounted for. The current code tries to actually do that, but the flag gets cleared to early. So store its value and use it that stored value instead of checking for a flag that is always cleared. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08Bluetooth: Add debugfs entry for setting vendor diagnostic modeMarcel Holtmann1-3/+60
This adds a new debugfs entry for enabling and disabling the vendor diagnostic mode. It is only exposed for drivers that provide the set_diag driver callback and actually have an option for vendor specific diagnostic information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08Bluetooth: Add support for vendor specific diagnostic channelMarcel Holtmann1-0/+15
Introduce hci_recv_diag function for HCI drivers to allow sending vendor specific diagnostic messages into the Bluetooth core stack. The messages are not processed, but they are forwarded to the monitor channel and can be retrieved by user space diagnostic tools. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05Bluetooth: Move handling of HCI_RUNNING flag into coreMarcel Holtmann1-0/+3
Setting and clearing of HCI_RUNNING flag in each and every driver is just duplicating the same code all over the place. So instead of having the driver do it in their hdev->open and hdev->close callbacks, set it globally in the core transport handling. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05Bluetooth: Move HCI_RUNNING check into hci_send_frameMarcel Holtmann1-0/+5
In all callbacks for hdev->send the status of HCI_RUNNING is checked. So instead of repeating that code in every driver, move the check into the hci_send_frame function before calling hdev->send. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05Bluetooth: Introduce HCI_DEV_OPEN and HCI_DEV_CLOSE eventsMarcel Holtmann1-0/+6
When opening the HCI transport via hdev->open send HCI_DEV_OPEN event and when closing the HCI transport via hdev->close send HCI_DEV_CLOSE. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-09-29Bluetooth: Add hci_cmd_sync functionLoic Poulain1-0/+19
Send a HCI command and wait for command complete event. This function serializes the requests by grabbing the req_lock. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17Bluetooth: close HCI device when user channel socket gets closedSimon Fels1-1/+1
With 9380f9eacfbbee701daa416edd6625efcd3e29e1 the order of unsetting the HCI_USER_CHANNEL flag of the HCI device was reverted to ensure the device is first closed before making it available again. Due to hci_dev_close checking for HCI_USER_CHANNEL being set on the device it was never really closed and was kept opened. We're now calling hci_dev_do_close directly to make sure the device is correctly closed and we keep the correct order to unset the flag on our device object. Signed-off-by: Simon Fels <simon.fels@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17Bluetooth: Use BROKEN_STORED_LINK_KEY quirk for HCI_Read_Stored_Link_KeyJohan Hedberg1-1/+2
Some counterfeit CSR controllers also have broken behavior with the HCI_Read_Stored_Link_Key command: < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 Address: 00:00:00:00:00:00 (OUI 00-00-00) Read all: 0x01 > HCI Event: Command Complete (0x0e) plen 8 Read Stored Link Key (0x03|0x000d) ncmd 1 Status: Unsupported Feature or Parameter Value (0x11) Max num keys: 0 Num keys: 0 Extend the existing HCI_QUIRK_BROKEN_STORED_LINK_KEY to be also used for this HCI command. Reported-and-tested-by: Rhobison Alves Pereira <rhobison@hotmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 11:30:16 +0000