summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2015-02-11Merge tag 'pinctrl-v3.20-1' of ↵Linus Torvalds44-3135/+7335
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pincontrol updates from Linus Walleij: :This is the bulk of pin control changes for the v3.20 cycle: Framework changes and enhancements: - Passing -DDEBUG recursively to subdir drivers so we get debug messages properly turned on. - Infer map type from DT property in the groups parsing code in the generic pinconfig code. - Support for custom parameter passing in generic pin config. This is used when you are using the generic pin config, but want to add a few custom properties that no other driver will use. New drivers: - Driver for the Xilinx Zynq - Driver for the AmLogic Meson SoCs New features in drivers: - Sleep support (suspend/resume) for the Cherryview driver - mvebeu a38x can now mux a UART on pins MPP19 and MPP20 - Migrated the qualcomm driver to generic pin config handling of extended config options in the core code. - Support BUS1 and AUDIO in the Exynos pin controller. - Add some missing functions in the sun6i driver. - Add support for the A31S variant in the sun6i driver. - EMEv2 support in the Renesas PFC driver. - Add support for Qualcomm MSM8916 in the qcom driver. Deleted features - Drop support for the SiRF Marco that was never released to the market. - Drop SH7372 support as the support for this platform is removed from the kernel" * tag 'pinctrl-v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (40 commits) sh-pfc: emev2 - Fix mangled author name pinctrl: cherryview: Configure HiZ pins to be input when requested as GPIOs pinctrl: imx25: fix numbering for pins pinctrl: pinctrl-imx: don't use invalid value of conf_reg pinctrl: qcom: delete pin_config_get/set pinconf operations pinctrl: qcom: Add msm8916 pinctrl driver DT: pinctrl: Document Qualcomm MSM8916 pinctrl binding pinctrl: qcom: increase variable size for register offsets pinctrl: hide PCONFDUMP in #ifdef pinctrl: rockchip: Only mask interrupts; never disable pinctrl: zynq: Fix usb0 pins pinctrl: sh-pfc: sh7372: Remove DT binding documentation pinctrl: sh-pfc: sh7372: Remove PFC support sh-pfc: Add emev2 pinmux support sh-pfc: add macro to define pinmux without function pinctrl: add driver for Amlogic Meson SoCs staging: drivers: pinctrl: Fixed checkpatch.pl warnings pinctrl: exynos: Add AUDIO pin controller for exynos7 sh-pfc: r8a7790: add MLB+ pin group sh-pfc: r8a7791: add MLB+ pin group ...
2015-02-05sh-pfc: emev2 - Fix mangled author nameGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-04pinctrl: cherryview: Configure HiZ pins to be input when requested as GPIOsMika Westerberg1-2/+15
If the pin is in HiZ mode when it is requested as GPIO its value cannot be read (it always returns 0). In order to cope with the Linux GPIO subsystem where we do not have such state at all, turn the pin to be input instead. Reported-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03pinctrl: imx25: fix numbering for pinsUwe Kleine-König1-139/+137
The pin id for a given tuple listed in a fsl,pins property is calculated by dividing the first entry (which is also a register offset) by 4. As the first available register is at offset 0x8 and configures the pad MX25_PAD_A10 the right id for this pin is 2. All other pins are off by one, too. This patch drops the definition MX25_PAD_RESERVE1 (together with its only use) and decrements all following values by 1. Fixes: b4a87c9b966f ("pinctrl: pinctrl-imx: add imx25 pinctrl driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03pinctrl: pinctrl-imx: don't use invalid value of conf_regUwe Kleine-König1-1/+1
The right check for conf_reg to be invalid it testing against -1 not 0 as is done in the rest of the driver. This fixes an oops that can be triggered by: cat /sys/kernel/debug/pinctrl/43fac000.iomuxc/* Fixes: ae75ff814538 ("pinctrl: pinctrl-imx: add imx pinctrl core driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30pinctrl: qcom: delete pin_config_get/set pinconf operationsStanimir Varbanov1-17/+0
The .pin_config_get/set operation are not supported in qcom pinctrl driver. As the pinconf core is smart enough it doesn't complain about that. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30pinctrl: qcom: Add msm8916 pinctrl driverJoonwoo Park3-0/+1014
Add initial pinctrl driver to support pin configuration with pinctrl framework for msm8916. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30pinctrl: qcom: increase variable size for register offsetsJoonwoo Park1-5/+5
On newer TLMM hardware blocks the registers are spread and we need an offsets upper than 16 bits to address them. Increase the register offset variables to 32 bits size. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30pinctrl: hide PCONFDUMP in #ifdefArnd Bergmann2-0/+8
The zynq and qcom-spmi pinctrl drivers both use pin_config_item arrays to provide extra interfaces in debugfs. This structure and the PCONFDUMP macro are not defined if CONFIG_DEBUG_FS is turned off, so we get build errors like: pinctrl/qcom/pinctrl-spmi-gpio.c:139:37: error: array type has incomplete element type static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = { ^ pinctrl/qcom/pinctrl-spmi-gpio.c:140:2: error: implicit declaration of function 'PCONFDUMP' [-Werror=implicit-function-declaration] PCONFDUMP(PMIC_GPIO_CONF_PULL_UP, "pull up strength", NULL, true), ^ pinctrl/qcom/pinctrl-spmi-gpio.c:139:37: warning: 'pmic_conf_items' defined but not used [-Wunused-variable] static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = { Lacking any better idea to solve this nicely, this patch uses #ifdef to hide the structures, just like the pinctrl core does. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30pinctrl: rockchip: Only mask interrupts; never disableDoug Anderson1-35/+13
The Rockchip GPIO interrupt controller totally throws away all status about an interrupt when you "disable" the interrupt. That has unfortunate consequences in the following situation: 1. An edge-triggered interrupt is enabled and should wake the system. 2. System suspend happens: interrupt is disabled and marked for wake. 3. rockchip_irq_suspend() reenables the interrupt so we can wake. 4. Interrupt happens when asleep. 5. rockchip_irq_resume() redisables the interrupt. 6. Disabling the interrupt throws away all status about it. 7. Normal system resume happens and we enable the interrupt again, since we threw away status about the interrupt we don't know it fired while suspended. Even worse: if we need both edges of the interrupt the logic to swap edges never runs. Note: even if we somehow can post the status about wakeup interrupts in rockchip_irq_resume() we would still have a window of losing any edges that came in while interrupts were disabled. If we use mask only then we don't need to worry. The GPIO Interrupt controller keeps track of pending interrupts that are enabled and just masked. There was no real strong reason to support the enable/disable functionality (other than that it seemed right), so let's go back to just supporting mask/unmask but actually map it to the real mask/unmask. This ends up with slightly different (and more correct) behavior than before (f2dd028 pinctrl: rockchip: Fix enable/disable/mask/unmask). Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30Merge tag 'v3.19-rc6' into develLinus Walleij5-35/+83
Linux 3.19-rc6
2015-01-30pinctrl: zynq: Fix usb0 pinsAndreas Färber1-1/+1
Fix usb0 pin 19 -> 29 (matching ethernet1 pins and manual). Pin 19 is used for ethernet0 on the Parallella board. Fixes: add958cee967 ("pinctrl: Add driver for Zynq") Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-29pinctrl: sh-pfc: sh7372: Remove PFC supportMagnus Damm5-2661/+0
Remove sh7372 PFC support as part of the sh7372 and Mackerel legacy code removal. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-27sh-pfc: Add emev2 pinmux supportNiklas Söderlund5-0/+1727
Add PFC support for the EMMA Mobile EV2 SoC including pin groups for on-chip devices. Signed-off-by: Niklas Söderlund <niso@kth.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-27sh-pfc: add macro to define pinmux without functionNiklas Söderlund1-0/+2
Used to define pinmux configurations where the pinmux function have no representation in the configuration registers but instead solely depends on a group selection. Signed-off-by: Niklas Söderlund <niso@kth.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-26pinctrl: at91: allow to have disabled gpio bankJean-Christophe PLAGNIOL-VILLARD1-53/+55
Today we expect that all the bank are enabled, and count the number of banks used by the pinctrl based on it instead of using the last bank id enabled. So switch to it, set the chained IRQ at runtime based on enabled banks and wait only the number of enabled gpio controllers at probe time. Cc: <stable@vger.kernel.org> # 3.18 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-26pinctrl: add driver for Amlogic Meson SoCsBeniamino Galvani6-0/+2070
This is a driver for the pinmux and GPIO controller available in Amlogic Meson SoCs. It currently supports only Meson8, however the common code should be generic enough to work also for other SoCs after having defined the proper set of functions and groups. GPIO interrupts are not supported at the moment due to lack of documentation. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-21staging: drivers: pinctrl: Fixed checkpatch.pl warningsAnjana Sasindran1-1/+2
This patch fixes two checkpatch.pl warnings WARNING: Error trailing white space WARNING: MIssing blank line after declaration Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-19pinctrl: qcom: Don't iterate past end of function arrayStephen Boyd1-2/+2
Timur reports that this code crashes if nfunctions is 0. Fix the loop iteration to only consider valid elements of the functions array. Reported-by: Timur Tabi <timur@codeaurora.org> Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Ivan T. Ivanov <iivanov@mm-sol.com> Cc: Andy Gross <agross@codeaurora.org> Fixes: 327455817a92 "pinctrl: qcom: Add support for reset for apq8064" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-19pinctrl: exynos: Add AUDIO pin controller for exynos7Padmavathi Venna1-0/+10
Audio IPs on Exynos7 require gpios available in AUDIO pin controller block. So adding the AUDIO pinctrl support. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15sh-pfc: r8a7790: add MLB+ pin groupSergei Shtylyov1-0/+13
Add MLB+ 3-pin mode pin group to R8A7790 PFC driver. Based on original patch by Andrey Gusakov <andrey.gusakov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15sh-pfc: r8a7791: add MLB+ pin groupSergei Shtylyov1-0/+13
Add MLB+ 3-pin mode pin group to R8A7791 PFC driver. Based on original patch by Andrey Gusakov <andrey.gusakov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15sh-pfc: r8a7791: fix typo in MLB_CLKSergei Shtylyov1-4/+4
The R8A7791 manual sometimes calls the signal MLB_CLK and sometimes MLB_CK; the latter can only be encountered in the PFC section and is probably just a typo (this signal is always called MLB_CLK in the R8A7790 manual). Fix occurences of MLB_CK throughout the R8A7791 PFC driver. Based on original patch by Andrey Gusakov <andrey.gusakov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: sirf: drop marco supportBarry Song3-40/+14
marco chip has been dropped, clear its support. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: bcm281xx: Constify struct regmap_configKrzysztof Kozlowski1-2/+2
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make also of_device_id array const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: dove: Constify struct regmap_config and of_device_idKrzysztof Kozlowski1-2/+2
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make also of_device_id array const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: sun6i: Add A31s pinctrl supportHans de Goede3-0/+820
The A31s is a stripped down version of the A31, as such it is missing some pins and some functions on some pins. The new pinctrl-sun6i-a31s.c this commit adds is a copy of pinctrl-sun6i-a31s.c with the missing pins and functions removed. Note there is no a31s specific version of pinctrl-sun6i-a31-r.c, as the prcm pins are identical between the A31 and the A31s. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: sun6i: Add some missing functionsHans de Goede1-0/+5
While working on pinctrl for the A31s, I noticed that function 4 of PA15 - PA18 was missing, add these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: exynos: Add BUS1 pin controller for exynos7Vivek Gautam1-0/+19
USB and Power regulator on Exynos7 require gpios available in BUS1 pin controller block. So adding the BUS1 pinctrl support. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: pinconf-generic: loose DT dependenceLinus Walleij3-25/+30
New pin controllers such as ACPI-based may also have custom properties to parse, and should be able to use generic pin config. Let's make the code compile on !OF systems and rename members a bit to underscore it is custom parameters and not necessarily DT parameters. This fixes a build regression for x86_64 on the zeroday kernel builds. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-and-tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: lantiq: remove bogus of_gpio_chip_addJohan Hovold1-2/+0
Remove bogus call to of_gpiochip_add (and of_gpio_chip remove in error path) which is also called when adding the gpio chip. This prevents adding the same pinctrl range twice. Fixes: 3f8c50c9b110 ("OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: Fix two deadlocksJim Lin1-2/+3
This patch is to fix two deadlock cases. Deadlock 1: CPU #1 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #0 pinctrl_unregister (Holding lock pinctrldev_list_mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) Simply to say CPU#1 is holding lock A and trying to acquire lock B, CPU#0 is holding lock B and trying to acquire lock A. Deadlock 2: CPU #3 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #2 pinctrl_unregister (Holding lock pctldev->mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) CPU #0 tegra_gpio_request (Holding lock pinctrldev_list_mutex) -> pinctrl_get_device_gpio_range (Trying to acquire lock pctldev->mutex) Simply to say CPU#3 is holding lock A and trying to acquire lock D, CPU#2 is holding lock B and trying to acquire lock A, CPU#0 is holding lock D and trying to acquire lock B. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: rockchip: Avoid losing interrupts when supporting both edgesDoug Anderson1-25/+20
I was seeing cases where I was losing interrupts when inserting and removing SD cards. Sometimes the card would get "stuck" in the inserted state. I believe that the problem was related to the code to handle the case where we needed both rising and falling edges. This code would disable the interrupt as the polarity was switched. If an interrupt came at the wrong time it could be lost. We'll match what the gpio-dwapb.c driver does upstream and change the interrupt polarity without disabling things. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: qcom-spmi-gpio: Migrate to pinconf-genericSoren Brinkmann1-114/+11
Instead of the driver caring about implementation details like device tree, just provide information about driver specific pinconf parameters to pinconf-generic which takes care of parsing the DT. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-11pinctrl: Add driver for ZynqSoren Brinkmann3-0/+1185
This adds a pin-control driver for Zynq. Changes since v2: - driver-specific DT properties are passed to the core in two arrays, one for the actual DT parsing one for the debugfs representation. Issue a compiler warning when the number of entries is not the same for both arrays. Changes since v1: - fix EMIO_SD1_CD pin name - add USB to pinmux options changes since RFCv2: - let Zynq select PINCTRL_ZYNQ. Boot hangs when pinctrl information is present in DT but no driver available. - add #defines to get rid of magical constants - add commas at end of initializers - separate changes in mach-zynq in separate patch - add driver specific io-standard DT property - refactored pinconf set function to not require arguments for argument-less properties - squash other patches in - support for IO-standard property - support for low-power mode property - migration to pinconf_generic_dt_node_to_map_all() - use newly created infrastructure to add pass driver-specific DT params to pinconf-generic changes since RFC: - use syscon/regmap to access registers in SLCR space - rebase to 3.18: rename enable -> set_mux - add kernel-doc - support pinconf - supported attributes - pin-bias: pull up, tristate, disable - slew-rate: 0 == slow, 1 == fast; generic pinconf does not display argument Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-11pinctrl: pinconf-generic: Allow driver to specify DT paramsSoren Brinkmann8-104/+114
Additionally to the generic DT parameters, allow drivers to provide driver-specific DT parameters to be used with the generic parser infrastructure. To achieve this 'struct pinctrl_desc' is extended to pass custom pinconf option to the core. In order to pass this kind of information, the related data structures - 'struct pinconf_generic_dt_params', 'pin_config_item' - are moved from pinconf internals to the pinconf-generic header. Additionally pinconfg-generic is refactored to not only iterate over the generic pinconf parameters but also take the parameters into account that are provided through the driver's 'struct pinctrl_desc'. In particular 'pinconf_generic_parse_dt_config()' and 'pinconf_generic_dump' helpers are split into two parts each. In order to have a more generic helper that can be used to process the generic parameters as well as the driver-specific ones. v2: - fix typo - add missing documentation for @conf_items member in struct - rebase to pinctrl/devel: conflict in abx500 - rename _pinconf_generic_dump() to pinconf_generic_dump_one() - removed '_' from _parse_dt_cfg() - removed BUG_ONs, error condition is handled in if statements - removed pinconf_generic_dump_group() & pinconf_generic_dump_pin helpers - fixed up corresponding call sites - renamed pinconf_generic_dump() to pinconf_generic_dump_pins() - added kernel-doc to pinconf_generic_dump_pins() - add kernel-doc - more verbose commit message Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-11pinctrl: pinconf-generic: Infer map type from DT propertySoren Brinkmann1-3/+14
With the new 'groups' property, the DT parser can infer the map type from the fact whether 'pins' or 'groups' is used to specify the pin group to work on. To maintain backwards compatibitliy with current usage of the DT binding, this is only done when PIN_MAP_TYPE_INVALID is passed to the parsing function as type. Also, a new helper 'pinconf_generic_dt_node_to_map_all()' is introduced, which can be used by drivers as generic callback for dt_node_to_map() to leverage the new feature. Changes since v2: - rename dt_pin_specifier to subnode_target_type - add additional comment in header file explaining passing an invalid map type - mention map_all() helper in commit message Changes since RFC v2: - none Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-10pinctrl: pass -DDEBUG in subdirsLinus Walleij1-1/+1
When drivers are compiled in subdirectories the -DDEBUG flag need to be passed in the individual Makefiles. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Suggested-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-10pinctrl: mvebu: a38x: Add UART1 muxing optionsMaxime Ripard1-2/+4
The MPP19 and MMP20 pins also have the ability to be muxed to the uart1 function. Add this case to the pinctrl driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-10pinctrl: intel: drop owner assignment from platform_driversWolfram Sang1-1/+0
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-10pinctrl: cherryview: Save and restore pin configs over system sleepMika Westerberg1-0/+104
Before resuming from system sleep BIOS restores its view of pin configuration. If we have configured some pins differently from that, for instance some driver requested a pin as a GPIO but it was not in GPIO mode originally, our view of the pin configuration will not match the hardware state anymore. This patch saves the pin configuration and interrupt mask registers on suspend and restores them on exit. This should make sure that the previously configured state is still in effect. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-07pinctrl: st: Add irq_disable hook to st_gpio_irqchipPatrice CHOTARD1-0/+1
Currently disable_irq() doesn't work for pinctrl-st driver, due to missing irq_disable hook in the driver. disable_irq() is required only for level-triggered interrupts, which is not the case normally. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-07pinctrl: st: avoid multiple mutex lockFrancesco VIRLINZI1-1/+3
Using the sysfs inteface to inspect the pins configuration the system can walk around a path which acquires the same mutex twice. On STiH407 platform, for example : cat /sys/kernel/debug/pinctrl/920f080.pin-controller-front0/pinconf-pins hangs the kernel and never returns. With this patch the mutex is temporary freed. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-30pinctrl: rockchip: Fix enable/disable/mask/unmaskDoug Anderson1-3/+33
The Rockchip pinctrl driver was only implementing the "mask" and "unmask" operations though the hardware actually has two distinct things: enable/disable and mask/unmask. It was implementing the "mask" operations as a hardware enable/disable and always leaving all interrupts unmasked. I believe that the old system had some downsides, specifically: - (Untested) if an interrupt went off while interrupts were "masked" it would be lost. Now it will be kept track of. - If someone wanted to change an interrupt back into a GPIO (is such a thing sensible?) by calling irq_disable() it wouldn't actually take effect. That's because Linux does some extra optimizations when there's no true "disable" function: it does a lazy mask. Let's actually implement enable/disable/mask/unmask properly. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-30pinctrl: rockchip: Handle wakeup pinsDoug Anderson1-0/+21
The rockchip pinctrl driver was using irq_gc_set_wake() as its implementation of irq_set_wake() but was totally ignoring everything that irq_gc_set_wake() did (which is to upkeep gc->wake_active). Let's fix that by setting gc->wake_active as GPIO_INTEN at suspend time and restoring GPIO_INTEN at resume time. NOTE a few quirks when thinking about this patch: - Rockchip pinctrl hardware supports both "disable/enable" and "mask/unmask". Right now we only use "disable/enable" and present those to Linux as "mask/unmask". This should be OK because enable/disable is optional and Linux will implement it in terms of mask/unmask. At the moment we always tell hardware all interrupts are unmasked (the boot default). - At suspend time Linux tries to call "disable" on all interrupts and also enables wakeup on all wakeup interrupts. One would think that since "disable" is implemented as "mask" when "disable" isn't provided and that since we were ignoring gc->wake_active that nothing would have woken us up. That's not the case since Linux "optimizes" things and just leaves interrutps unmasked, assuming it could mask them later when they go off. That meant that at suspend time all interrupts were actually being left enabled. With this patch random non-wakeup interrupts no longer wake the system up. Wakeup interrupts still wake the system up. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds74-76/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-14Merge tag 'usb-3.19-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...
2014-12-14Merge tag 'gpio-v3.19-2' of ↵Linus Torvalds3-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull take two of the GPIO updates: "Same stuff as last time, now with a fixup patch for the previous compile error plus I ran a few extra rounds of compile-testing. This is the bulk of GPIO changes for the v3.19 series: - A new API that allows setting more than one GPIO at the time. This is implemented for the new descriptor-based API only and makes it possible to e.g. toggle a clock and data line at the same time, if the hardware can do this with a single register write. Both consumers and drivers need new calls, and the core will fall back to driving individual lines where needed. Implemented for the MPC8xxx driver initially - Patched the mdio-mux-gpio and the serial mctrl driver that drives modems to use the new multiple-setting API to set several signals simultaneously - Get rid of the global GPIO descriptor array, and instead allocate descriptors dynamically for each GPIO on a certain GPIO chip. This moves us closer to getting rid of the limitation of using the global, static GPIO numberspace - New driver and device tree bindings for 74xx ICs - New driver and device tree bindings for the VF610 Vybrid - Support the RCAR r8a7793 and r8a7794 - Guidelines for GPIO device tree bindings trying to get things a bit more strict with the advent of combined device properties - Suspend/resume support for the MVEBU driver - A slew of minor fixes and improvements" * tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits) gpio: mcp23s08: fix up compilation error gpio: pl061: document gpio-ranges property for bindings file gpio: pl061: hook request if gpio-ranges avaiable gpio: mcp23s08: Add option to configure IRQ output polarity as active high gpio: fix deferred probe detection for legacy API serial: mctrl_gpio: use gpiod_set_array function mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function gpio: remove const modifier from gpiod_get_direction() gpio: remove gpio_descs global array gpio: mxs: implement get_direction callback gpio: em: Use dynamic allocation of GPIOs gpio: Check if base is positive before calling gpio_is_valid() gpio: mcp23s08: Add simple IRQ support for SPI devices gpio: mcp23s08: request a shared interrupt gpio: mcp23s08: Do not free unrequested interrupt gpio: rcar: Add r8a7793 and r8a7794 support gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function gpiolib: allow simultaneous setting of multiple GPIO outputs gpio: mvebu: add suspend/resume support gpio: gpio-davinci: remove duplicate check on resource ..
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-12-11Merge tag 'pinctrl-v3.19-1' of ↵Linus Torvalds33-344/+4995
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: "Here is a stash of pin control changes I have collected for the v3.19 series. Mainly new hardware support, with Intels new embedded SoC as the especially interesting thing standing out, fully using the subsystem. - Force conversion of the ux500 pin control device trees and parsers to use the generic pin control bindings. - New driver and device tree bindings for the Qualcomm PMIC MPP pin controller and GPIO. - Some ACPI infrastructure for pin controllers. - New driver for the Intel CherryView/Braswell pin controller, the first Intel pin controller to fully take advantage of the pin control subsystem. - Support the Freescale i.MX VF610 variant. - Support the sunxi A80 variant. - Support the Samsung Exynos 4415 and Exynos 7 variants. - Split out Intel pin controllers to their own subdirectory. - A large slew of rockchip pin control updates, including suspend/resume support. - A large slew of Samsung Exynos pin controller updates. - Various minor updates and fixes" * tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (49 commits) pinctrl: at91: enhance (debugfs) at91_gpio_dbg_show pinctrl: meson: add device tree bindings documentation gpio: tz1090: Fix error handling of irq_of_parse_and_map pinctrl: tz1090-pinctrl.txt: Fix typo in binding pinctrl: pinconf-generic: Declare dt_params/conf_items const pinctrl: exynos: Add support for Exynos4415 pinctrl: exynos: Add initial driver data for Exynos7 pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts pinctrl: exynos: Consolidate irq domain callbacks pinctrl: exynos: Generalize the eint16_31 demux code pinctrl: samsung: Separate per-bank init and runtime data pinctrl: samsung: Constify samsung_pin_ctrl struct pinctrl: samsung: Constify samsung_pin_bank_type struct pinctrl: samsung: Drop unused label field in samsung_pin_ctrl struct pinctrl: samsung: Make samsung_pinctrl_get_soc_data use ERR_PTR() pinctrl: Add Intel Cherryview/Braswell pin controller support gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod() pinctrl: Fix path error in documentation pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume pinctrl: rockchip: add suspend/resume functions ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 19:57:53 +0000