summaryrefslogtreecommitdiff
path: root/drivers/extcon
AgeCommit message (Collapse)AuthorFilesLines
2016-08-08extcon: Add the synchronization extcon APIs to support the notificationChanwoo Choi1-75/+135
This patch adds the synchronization extcon APIs to support the notifications for both state and property. When extcon_*_sync() functions is called, the extcon informs the information from extcon provider to extcon client. The extcon driver may need to change the both state and multiple properties at the same time. After setting the data of a external connector, the extcon send the notification to client driver with the extcon_*_sync(). The list of new extcon APIs as following: - extcon_sync() : Send the notification for each external connector to synchronize the information between extcon provider driver and extcon client driver. - extcon_set_state_sync() : Set the state of external connector with noti. - extcon_set_property_sync() : Set the property of external connector with noti. For example, case 1, change the state of external connector and synchronized the data. extcon_set_state_sync(edev, EXTCON_USB, 1); case 2, change both the state and property of external connector and synchronized the data. extcon_set_state(edev, EXTCON_USB, 1); extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1); extcon_sync(edev, EXTCON_USB); case 3, change the property of external connector and synchronized the data. extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0); extcon_sync(edev, EXTCON_USB); case 4, change the property of external connector and synchronized the data. extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0); Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Rename the extcon_set/get_state() to maintain the function naming ↵Chanwoo Choi1-15/+13
pattern This patch just renames the existing extcon_get/set_cable_state_() as following because of maintaining the function naming pattern like as extcon APIs for property. - extcon_set_cable_state_() -> extcon_set_state() - extcon_get_cable_state_() -> extcon_get_state() But, this patch remains the old extcon_set/get_cable_state_() functions to prevent the build break. After altering new APIs, remove the old APIs. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Add the support for the capability of each propertyChanwoo Choi1-0/+140
This patch adds the support of the property capability setting. This function decides the supported properties of each external connector on extcon provider driver. Ths list of new extcon APIs to get/set the capability of property as following: - int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id, unsigned int prop); - int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id, unsigned int prop); Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Add the support for extcon property according to extcon typeChanwoo Choi1-1/+200
This patch support the extcon property for the external connector because each external connector might have the property according to the H/W design and the specific characteristics. - EXTCON_PROP_USB_[property name] - EXTCON_PROP_CHG_[property name] - EXTCON_PROP_JACK_[property name] - EXTCON_PROP_DISP_[property name] Add the new extcon APIs to get/set the property value as following: - int extcon_get_property(struct extcon_dev *edev, unsigned int id, unsigned int prop, union extcon_property_value *prop_val) - int extcon_set_property(struct extcon_dev *edev, unsigned int id, unsigned int prop, union extcon_property_value prop_val) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Add the extcon_type to gather each connector into five categoryChanwoo Choi1-29/+130
This patch adds the new extcon type to group the each connecotr into following five category. This type would be used to handle the connectors as a group unit instead of a connector unit. - EXTCON_TYPE_USB : USB connector - EXTCON_TYPE_CHG : Charger connector - EXTCON_TYPE_JACK : Jack connector - EXTCON_TYPE_DISP : Display connector - EXTCON_TYPE_MISC : Miscellaneous connector Also, each external connector is possible to belong to one more extcon type. In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08extcon: Fix compile time warningManinder Singh1-1/+1
This patch fixes below compilation warning:- drivers/extcon/extcon.c: In function extcon_register_notifier: drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized] if (idx >= 0) { Signed-off-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Maninder Singh <maninder1.s@samsung.com> [cw00.choi : Modify the patch title using the a captical letter for first char] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Block the bit masking operation for cable state except for extcon coreChanwoo Choi1-19/+1
This patch restrict the usage of extcon_update_state() in the extcon core because the extcon_update_state() use the bit masking to change the state of external connector. When this function is used in device drivers, it may occur the probelm with the handling mistake of bit masking. Also, this patch removes the extcon_get/set_state() functions because these functions use the bit masking which is reluctant way. Instead, extcon provides the extcon_set/get_cable_state_() functions. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Remove the state_store() to prevent the wrong accessChanwoo Choi1-20/+1
This patch removes the state_store() which change the state of external connectors with bit masking on user-space. It is wrong access to modify the change the state of external connectors. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: gpio: Remove the usage of extcon_set_state()Chanwoo Choi1-1/+1
This patch removes the usage of extcon_set_state() because it uses the bit masking to change the state of external connectors. The extcon framework should handle the state by extcon_set_cable_state_() with extcon id. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: adc-jack: Remove the usage of extcon_set_state()Chanwoo Choi1-12/+14
This patch removes the usage of extcon_set_state() because it uses the bit masking to change the state of external connectors. The extcon framework should handle the state by extcon_set/get_cable_state_() with extcon id. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: arizona: Remove the usage of extcon_update_state()Chanwoo Choi1-4/+7
This patch remvoes the usage of extcon_update_state() because the extcon_update_state() use directly the bit masking calculation to change the state of external connector without the unique id of external connector. It makes the code diffcult to read it. So, this patch uses the extcon_set_cable_state_() instead. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-08-08extcon: arizona: Remove unneeded semi-colonCharles Keepax1-1/+1
There is no need for a semi-colon at the end of a switch statement so remove it. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: Move extcon_get_edev_by_phandle() errors to dbg levelStephen Boyd1-2/+2
Sometimes drivers may call this API and expect it to fail because the extcon they're looking for is optional. Let's move these prints to debug level so it doesn't look like there's a problem when there isn't one. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08extcon: adc-jack: update cable state during bootVenkat Reddy Talla1-0/+1
Update cable state during boot to avoid any missing external cable events occurred before driver initialisation. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-07-02extcon: adc-jack: add suspend/resume supportVenkat Reddy Talla1-0/+34
adding suspend and resume funtionality for extcon-adc-jack driver to configure system wake up for extcon events, also adding support to enable/disable system wakeup through flag wakeup_source based on platform requirement. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-07-02extcon: add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+2
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-30extcon: link devres into core moduleArnd Bergmann1-1/+2
Splitting the resource-managed functions into a separate module means that the extcon core now fails to build because the internal "extcon_dev_allocate" symbol is not exported: ERROR: extcon_dev_allocate [drivers/extcon/devres.ko] undefined! My guess is that the intention was not to have two separate modules (which could be fixed by adding an export, plus the normal MODULE_AUTHOR/MODULE_LICENSE/... fields), but have two source files in the same module. This fixes the Makefile accordingly, making the name of the module extcon_core.ko, which is created from building both extcon.c and devres.c. Fixes: b225d00f3ad2 ("extcon: Split out the resource-managed functions from extcon core") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27extcon: Add resource-managed functions to register extcon notifierChanwoo Choi1-0/+73
This patch adds the resource-managed functions for register/unregister the extcon notifier with the id of each external connector. This function will make it easy to handle the extcon notifier. - int devm_extcon_register_notifier(struct device *dev, struct extcon_dev *edev, unsigned int id, struct notifier_block *nb); - void devm_extcon_unregister_notifier(struct device *dev, struct extcon_dev *edev, unsigned int id, struct notifier_block *nb); Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27extcon: Split out the resource-managed functions from extcon coreChanwoo Choi3-118/+144
This patch split out the resource-managed related functions from extcon core driver. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27extcon: Move struct extcon_cable from header file to coreChanwoo Choi1-0/+20
This patch moves the struct extcon_cable because that should be only handled by extcon core. There are no reason to publish the internal structure. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-23extcon: Check for incorrect connection type in notifier registerStephen Boyd1-0/+4
If we call extcon_register_notifier() with the wrong cable type, it blows up with an oops instead of returning an error code. Let's be nice and fail gracefully given that the consumer might not know if the cable is supported by the extcon provider. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21Merge branch 'ib-extcon-powersupply-4.8' into extcon-nextChanwoo Choi1-177/+24
2016-06-21extcon: usb-gpio: add support for ACPI gpio interfaceLu Baolu1-1/+2
GPIO resource could be retrieved through APCI as well. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Felipe Balbi <balbi@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21extcon: usb-gpio: add device binding for platform deviceLu Baolu1-0/+7
This is needed to handle the GPIO connected USB ID pin found on Intel Baytrail devices. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Felipe Balbi <balbi@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21extcon: usb-gpio: Don't miss event during suspend/resumeRoger Quadros1-0/+3
Pin state might have changed during suspend/resume while our interrupts were disabled and if device doesn't support wakeup. Scan for change during resume for such case. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21extcon: usb-gpio: switch to use pm wakeirq apisGrygorii Strashko1-13/+6
Switch to use PM wakeirq APIs which automates wakeup IRQs enabling/disabling and so allows to make code simpler. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-15extcon: palmas: Fix boot up state of VBUS when using GPIO detectionRoger Quadros1-0/+2
If USB cable is connected prior to boot, we don't get any interrupts so we must manually check the VBUS state and report it during probe. If we don't do it then USB controller will never know that peripheral cable was connected till the user unplugs and replugs the cable. Fixes: b7aad8e2685b ("extcon: palmas: Add the support for VBUS detection by using GPIO") Cc: stable@vger.kernel.org Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-10extcon: Remove the deprecated extcon functionsChanwoo Choi1-177/+24
This patch removes the deprecated extcon functions using string type to identify the type of external connector. The Commit 2a9de9c0f08d61 ("extcon: Use the unique id for external connector instead of string) uses the unique id to separate the type of external connector instead of string name. - extcon_register_interest() - extcon_unregister_interest() - extcon_set_cable_state() - extcon_get_cable_state() And, extcon_register_interest() finds the first extcon device to include the requested external connector from extcon client device and then register the notifier if extcon device argument is NULL. Instead, extcon_register_notifier() supports this feature. But, this patch remains the deprecatd function definition to prevent the build break. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-04-04extcon: palmas: Drop stray IRQF_EARLY_RESUME flagNishanth Menon1-2/+1
Palmas extcon IRQs are nested threaded and wired to the Palmas interrupt controller. So, this flag is not required for nested IRQs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. However, the fix in commit ae64e42cc2b3 ("extcon: palmas: Drop IRQF_EARLY_RESUME flag") missed a stray flag causing the following crash on resume on BeagleBoard-X15 platform: [ 53.670141] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [..] [ 53.670141] [<c04ae734>] (omap_set_gpio_triggering) from [<c04aeb94>] (omap_gpio_unmask_irq+0xc0/0xc4) [ 53.670141] [<c04aeb94>] (omap_gpio_unmask_irq) from [<c01a0b88>] (irq_enable+0x30/0x44) [ 53.670141] [<c01a0b88>] (irq_enable) from [<c019ebd8>] (__enable_irq+0x54/0x78) [ 53.670141] [<c019ebd8>] (__enable_irq) from [<c01a4e60>] (resume_irqs+0xe8/0x100) [ 53.670141] [<c01a4e60>] (resume_irqs) from [<c0514840>] (syscore_resume+0x94/0x298) [ 53.670141] [<c0514840>] (syscore_resume) from [<c01981cc>] (suspend_devices_and_enter+0x790/0x9e4) [ 53.670141] [<c01981cc>] (suspend_devices_and_enter) from [<c0198a60>] (pm_suspend+0x640/0x75c) [ 53.670141] [<c0198a60>] (pm_suspend) from [<c0196bec>] (state_store+0x64/0xb8) [ 53.670141] [<c0196bec>] (state_store) from [<c0307944>] (kernfs_fop_write+0xc0/0x1bc) [ 53.670141] [<c0307944>] (kernfs_fop_write) from [<c028acb0>] (__vfs_write+0x1c/0xd8) [ 53.670141] [<c028acb0>] (__vfs_write) from [<c028bba0>] (vfs_write+0x90/0x16c) [ 53.670141] [<c028bba0>] (vfs_write) from [<c028c8c0>] (SyS_write+0x44/0x9c) [ 53.670141] [<c028c8c0>] (SyS_write) from [<c0107840>] (ret_fast_syscall+0x0/0x1c) [..] Fixes: ae64e42cc2b3 ("extcon: palmas: Drop IRQF_EARLY_RESUME flag") Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Roger Quadros <rogerq@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-02-29extcon: palmas: Drop IRQF_EARLY_RESUME flagGrygorii Strashko1-2/+2
Palams extcon IRQs are nested threaded and wired to the Palmas inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Roger Quadros <rogerq@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-02-05extcon: palmas: Add the support for VBUS detection by using GPIOFelipe Balbi1-0/+50
This patch support for VBUS detection by using GPIO pin. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2016-02-05extcon: max77843: Use correct size for reading the interrupt registerDan Carpenter1-1/+1
The info->status[] array has 3 elements. We are using size MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as intended. Fixes: 135d9f7d135a ('extcon: max77843: Clear IRQ bits state before request IRQ') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [cw00.choi: Modify the patch title] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-01-25extcon: arizona: Use DAPM mutex helper functionsCharles Keepax1-2/+2
We should be using the helper functions to lock the DAPM mutex not accessing it directly. There are no ill effects of this as the moment but it is best practice, and the implementation could be changed in the future. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-01-25extcon: Add the EXTCON_CHG_USB_SDP to support SDP charing portChanwoo Choi6-1/+28
This patch adds the new EXTCON_CHG_USB_SDP connector to support SDP (Standard Downstream Port) USB charging port. The commit 11eecf910bd8 ("extcon: Modify the id and name of external connector") add the new EXTCON_CHG_USB_SDP connector which support the both data transfer and usb charging at the same time. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25extcon: gpio: Fix typo in commentMoritz Fischer1-1/+1
This patch fixes the typo in comment of extcon-gpio.c driver. - 'interrput' -> 'interrupt' Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-01-25extcon: Use to_i2c_client for both rt8973a and sm5502Geliang Tang2-4/+4
Use to_i2c_client() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-21extcon: add Maxim MAX3355 driverSergei Shtylyov3-0/+156
Maxim Integrated MAX3355E chip integrates a charge pump and comparators to enable a system with an integrated USB OTG dual-role transceiver to function as an USB OTG dual-role device. In addition to sensing/controlling Vbus, the chip also passes thru the ID signal from the USB OTG connector. On some Renesas boards, this signal is just fed into the SoC thru a GPIO pin -- there's no real OTG controller, only host and gadget USB controllers sharing the same USB bus; however, we'd like to allow host or gadget drivers to be loaded depending on the cable type, hence the need for the MAX3355 extcon driver. The Vbus status signals are also wired to GPIOs (however, we aren't currently interested in them), the OFFVBUS# signal is controlled by the host controllers, there's also the SHDN# signal wired to a GPIO, it should be driven high for the normal operation. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Rob Herring <robh@kernel.org> [cw00.choi: Add the GPIOLIB dependency] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15extcon: max77843: fix handling return value of regmap_irq_get_virqAndrzej Hajda1-1/+1
The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15extcon: max77693: fix handling return value of regmap_irq_get_virqAndrzej Hajda1-2/+2
The function can return negative values, so its result should be assigned to signed variable. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15extcon: max14577: fix handling return value of regmap_irq_get_virqAndrzej Hajda1-1/+1
The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15extcon: arizona: Add device bindings for the micd configurationsCharles Keepax1-2/+54
Add device bindings to support configuring the jack detection configurations. Each configuration needs to specify the connection of the mic det pins, which micbias should be used and the value of the micd polarity GPIO required to activate that configuration. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-27extcon: rt8973: Add IRQF_ONESHOT to interrupt flagsSaurabh Sengar1-1/+1
This patch adds IRQF_ONESHOT if no primary handler is provided for request threaded irq. Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-24extcon: arizona: Update naming for micd-timeout DT to include unitsCharles Keepax1-1/+1
Add time units of -ms (milliseconds) to wlf,micd-timeout. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-24extcon: arizona: Update naming for second jack detection DT bindingCharles Keepax1-2/+2
Update the name for the second jack detection pin binding to be a little less confusing. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20extcon: arizona: Add device binding for second jack detect pin on GPIO5Charles Keepax1-0/+5
Some Arizona devices have the option to use the GPIO5 pin as a second jack detection pin. This patch adds device bindings to specify to the driver that it should use this pin. Note that the second jack detection pin is hard wired in the chip so can only be enabled through the binding, rather than a pin being specified. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20extcon: arizona: Add device binding for jack detect polarity inversionCharles Keepax1-0/+3
By default the driver expects the jackdet pin to be pulled low when a jack is inserted. This patch adds a device binding that allows the user to specify that the jackdet pin will be pulled high when a jack is inserted. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20extcon: arizona: Add device binding for the general purpose switchCharles Keepax1-0/+2
The switch is generally used in conjunction with the MICDET clamp to suppress pops and clicks associated with jack insertion. This patch adds a binding that allows the user to select the mode of operation for this switch. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20extcon: arizona: Add device binding to enable ADC mode micdetCharles Keepax1-0/+3
Add a simple boolean binding to turn on and off the use of ADC microphone detection mode to determine 3/4 pole jack. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-10-16extcon: Modify the id and name of external connectorChanwoo Choi9-93/+103
This patch modifies the id and name of external connector with the additional prefix to clarify both attribute and meaning of external connector as following: - EXTCON_CHG_* mean the charger connector. - EXTCON_JACK_* mean the jack connector. - EXTCON_DISP_* mean the display port connector. Following table show the new name of external connector with old name: -------------------------------------------------- Old extcon name | New extcon name | -------------------------------------------------- EXTCON_TA | EXTCON_CHG_USB_DCP | EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP | EXTCON_FAST_CHARGER | EXTCON_CHG_USB_FAST | EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_SLOW | -------------------------------------------------- EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE | EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE | EXTCON_LINE_IN | EXTCON_JACK_LINE_IN | EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT | EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN | EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT | EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN | EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT | -------------------------------------------------- EXTCON_HMDI | EXTCON_DISP_HDMI | EXTCON_MHL | EXTCON_DISP_MHL | EXTCON_DVI | EXTCON_DISP_DVI | EXTCON_VGA | EXTCON_DISP_VGA | -------------------------------------------------- And, when altering the name of USB charger connector, EXTCON refers to the "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard name of USB charging port as following. Following name of USB charging port are already used in power_supply subsystem. We chan check it on patch[2]. - EXTCON_CHG_USB_SDP /* Standard Downstream Port */ - EXTCON_CHG_USB_DCP /* Dedicated Charging Port */ - EXTCON_CHG_USB_CDP /* Charging Downstream Port */ - EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */ [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip [2] commit 85efc8a18ced ("power_supply: Add types for USB chargers") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [ckeepax: For the Arizona changes] Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-09-30extcon: gpio: Use descriptor-based GPIO interface instead of legacy gpio_* APIChanwoo Choi1-19/+43
This patch uses the descriptor-based GPIO interface (gpiod_* API) instead of legacy gpio_* API and add the internal gpio_extcon_init() to handle all gpio-related tasks. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 10:39:50 +0000