summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/Kconfig2
-rw-r--r--drivers/tty/hvc/hvc_iucv.c103
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/tty/serial/crisv10.c2
-rw-r--r--drivers/tty/serial/icom.c4
-rw-r--r--drivers/tty/serial/pch_uart.c10
-rw-r--r--drivers/tty/serial/samsung.c8
-rw-r--r--drivers/tty/serial/serial-tegra.c38
-rw-r--r--drivers/tty/serial/sh-sci.c425
-rw-r--r--drivers/tty/serial/sh-sci.h2
-rw-r--r--drivers/tty/tty_audit.c2
11 files changed, 381 insertions, 217 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 978db344bda0..b24aa010f68c 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -366,7 +366,7 @@ config TRACE_SINK
"Trace data router for MIPI P1149.7 cJTAG standard".
config PPC_EPAPR_HV_BYTECHAN
- tristate "ePAPR hypervisor byte channel driver"
+ bool "ePAPR hypervisor byte channel driver"
depends on PPC
select EPAPR_PARAVIRT
help
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index db19a38c8c69..ea74460f3638 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -77,6 +77,7 @@ struct hvc_iucv_private {
struct list_head tty_outqueue; /* outgoing IUCV messages */
struct list_head tty_inqueue; /* incoming IUCV messages */
struct device *dev; /* device structure */
+ u8 info_path[16]; /* IUCV path info (dev attr) */
};
struct iucv_tty_buffer {
@@ -126,7 +127,7 @@ static struct iucv_handler hvc_iucv_handler = {
* This function returns the struct hvc_iucv_private instance that corresponds
* to the HVC virtual terminal number specified as parameter @num.
*/
-struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num)
+static struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num)
{
if ((num < HVC_IUCV_MAGIC) || (num - HVC_IUCV_MAGIC > hvc_iucv_devices))
return NULL;
@@ -772,18 +773,37 @@ static int hvc_iucv_filter_connreq(u8 ipvmid[8])
static int hvc_iucv_path_pending(struct iucv_path *path,
u8 ipvmid[8], u8 ipuser[16])
{
- struct hvc_iucv_private *priv;
+ struct hvc_iucv_private *priv, *tmp;
+ u8 wildcard[9] = "lnxhvc ";
+ int i, rc, find_unused;
u8 nuser_data[16];
u8 vm_user_id[9];
- int i, rc;
+ ASCEBC(wildcard, sizeof(wildcard));
+ find_unused = !memcmp(wildcard, ipuser, 8);
+
+ /* First, check if the pending path request is managed by this
+ * IUCV handler:
+ * - find a disconnected device if ipuser contains the wildcard
+ * - find the device that matches the terminal ID in ipuser
+ */
priv = NULL;
- for (i = 0; i < hvc_iucv_devices; i++)
- if (hvc_iucv_table[i] &&
- (0 == memcmp(hvc_iucv_table[i]->srv_name, ipuser, 8))) {
- priv = hvc_iucv_table[i];
+ for (i = 0; i < hvc_iucv_devices; i++) {
+ tmp = hvc_iucv_table[i];
+ if (!tmp)
+ continue;
+
+ if (find_unused) {
+ spin_lock(&tmp->lock);
+ if (tmp->iucv_state == IUCV_DISCONN)
+ priv = tmp;
+ spin_unlock(&tmp->lock);
+
+ } else if (!memcmp(tmp->srv_name, ipuser, 8))
+ priv = tmp;
+ if (priv)
break;
- }
+ }
if (!priv)
return -ENODEV;
@@ -826,6 +846,10 @@ static int hvc_iucv_path_pending(struct iucv_path *path,
priv->path = path;
priv->iucv_state = IUCV_CONNECTED;
+ /* store path information */
+ memcpy(priv->info_path, ipvmid, 8);
+ memcpy(priv->info_path + 8, ipuser + 8, 8);
+
/* flush buffered output data... */
schedule_delayed_work(&priv->sndbuf_work, 5);
@@ -960,6 +984,49 @@ static int hvc_iucv_pm_restore_thaw(struct device *dev)
return 0;
}
+static ssize_t hvc_iucv_dev_termid_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hvc_iucv_private *priv = dev_get_drvdata(dev);
+ size_t len;
+
+ len = sizeof(priv->srv_name);
+ memcpy(buf, priv->srv_name, len);
+ EBCASC(buf, len);
+ buf[len++] = '\n';
+ return len;
+}
+
+static ssize_t hvc_iucv_dev_state_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hvc_iucv_private *priv = dev_get_drvdata(dev);
+ return sprintf(buf, "%u:%u\n", priv->iucv_state, priv->tty_state);
+}
+
+static ssize_t hvc_iucv_dev_peer_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hvc_iucv_private *priv = dev_get_drvdata(dev);
+ char vmid[9], ipuser[9];
+
+ memset(vmid, 0, sizeof(vmid));
+ memset(ipuser, 0, sizeof(ipuser));
+
+ spin_lock_bh(&priv->lock);
+ if (priv->iucv_state == IUCV_CONNECTED) {
+ memcpy(vmid, priv->info_path, 8);
+ memcpy(ipuser, priv->info_path + 8, 8);
+ }
+ spin_unlock_bh(&priv->lock);
+ EBCASC(ipuser, 8);
+
+ return sprintf(buf, "%s:%s\n", vmid, ipuser);
+}
+
/* HVC operations */
static const struct hv_ops hvc_iucv_ops = {
@@ -985,6 +1052,25 @@ static struct device_driver hvc_iucv_driver = {
.pm = &hvc_iucv_pm_ops,
};
+/* IUCV HVC device attributes */
+static DEVICE_ATTR(termid, 0640, hvc_iucv_dev_termid_show, NULL);
+static DEVICE_ATTR(state, 0640, hvc_iucv_dev_state_show, NULL);
+static DEVICE_ATTR(peer, 0640, hvc_iucv_dev_peer_show, NULL);
+static struct attribute *hvc_iucv_dev_attrs[] = {
+ &dev_attr_termid.attr,
+ &dev_attr_state.attr,
+ &dev_attr_peer.attr,
+ NULL,
+};
+static struct attribute_group hvc_iucv_dev_attr_group = {
+ .attrs = hvc_iucv_dev_attrs,
+};
+static const struct attribute_group *hvc_iucv_dev_attr_groups[] = {
+ &hvc_iucv_dev_attr_group,
+ NULL,
+};
+
+
/**
* hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance
* @id: hvc_iucv_table index
@@ -1046,6 +1132,7 @@ static int __init hvc_iucv_alloc(int id, unsigned int is_console)
priv->dev->bus = &iucv_bus;
priv->dev->parent = iucv_root;
priv->dev->driver = &hvc_iucv_driver;
+ priv->dev->groups = hvc_iucv_dev_attr_groups;
priv->dev->release = (void (*)(struct device *)) kfree;
rc = device_register(priv->dev);
if (rc) {
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 441ada489874..a3815eaed421 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1034,7 +1034,7 @@ config SERIAL_MSM_CONSOLE
config SERIAL_MSM_HS
tristate "MSM UART High Speed: Serial Driver"
- depends on ARCH_MSM
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
select SERIAL_CORE
help
If you have a machine based on MSM family of SoCs, you
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 477f22f773fc..690bdea0a0c1 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -2153,7 +2153,7 @@ static void flush_timeout_function(unsigned long data)
fast_timers[info->line].function = NULL;
serial_fast_timer_expired++;
- TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line));
+ TIMERD(DEBUG_LOG(info->line, "flush_timeout %i ", info->line));
TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired));
check_flush_timeout(info);
}
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index d98e43348970..67423805e6d9 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -455,11 +455,11 @@ static void load_code(struct icom_port *icom_port)
for (index = 0; index < fw->size; index++)
new_page[index] = fw->data[index];
- release_firmware(fw);
-
writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length);
writel(temp_pci, &icom_port->dram->mac_load_addr);
+ release_firmware(fw);
+
/*Setting the syncReg to 0x80 causes adapter to start downloading
the personality code into adapter instruction RAM.
Once code is loaded, it will begin executing and, based on
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 9cbd3acaf37f..8fa1134e0051 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1508,10 +1508,14 @@ static int pch_uart_verify_port(struct uart_port *port,
__func__);
return -EOPNOTSUPP;
#endif
- dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
- if (!priv->use_dma)
+ if (!priv->use_dma) {
pch_request_dma(port);
- priv->use_dma = 1;
+ if (priv->chan_rx)
+ priv->use_dma = 1;
+ }
+ dev_info(priv->port.dev, "PCH UART: %s\n",
+ priv->use_dma ?
+ "Use DMA Mode" : "No DMA");
}
return 0;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index c1af04d46682..9cd706df3b33 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1209,7 +1209,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
/* reset the fifos (and setup the uart) */
s3c24xx_serial_resetport(port, cfg);
- clk_disable_unprepare(ourport->clk);
return 0;
}
@@ -1287,6 +1286,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
platform_set_drvdata(pdev, &ourport->port);
+ /*
+ * Deactivate the clock enabled in s3c24xx_serial_init_port here,
+ * so that a potential re-enablement through the pm-callback overlaps
+ * and keeps the clock enabled in this case.
+ */
+ clk_disable_unprepare(ourport->clk);
+
#ifdef CONFIG_SAMSUNG_CLOCK
ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
if (ret < 0)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index dfe79ccc4fb3..d5c2a287b7e7 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -34,6 +34,7 @@
#include <linux/of_device.h>
#include <linux/pagemap.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
@@ -44,8 +45,6 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/clk/tegra.h>
-
#define TEGRA_UART_TYPE "TEGRA_UART"
#define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE)
#define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3)
@@ -103,6 +102,7 @@ struct tegra_uart_port {
const struct tegra_uart_chip_data *cdata;
struct clk *uart_clk;
+ struct reset_control *rst;
unsigned int current_baud;
/* Register shadow */
@@ -120,7 +120,6 @@ struct tegra_uart_port {
bool rx_timeout;
int rx_in_progress;
int symb_bit;
- int dma_req_sel;
struct dma_chan *rx_dma_chan;
struct dma_chan *tx_dma_chan;
@@ -832,9 +831,9 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
clk_prepare_enable(tup->uart_clk);
/* Reset the UART controller to clear all previous status.*/
- tegra_periph_reset_assert(tup->uart_clk);
+ reset_control_assert(tup->rst);
udelay(10);
- tegra_periph_reset_deassert(tup->uart_clk);
+ reset_control_deassert(tup->rst);
tup->rx_in_progress = 0;
tup->tx_in_progress = 0;
@@ -910,15 +909,14 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!dma_chan) {
+ dma_chan = dma_request_slave_channel_reason(tup->uport.dev,
+ dma_to_memory ? "rx" : "tx");
+ if (IS_ERR(dma_chan)) {
+ ret = PTR_ERR(dma_chan);
dev_err(tup->uport.dev,
- "Dma channel is not available, will try later\n");
- return -EPROBE_DEFER;
+ "DMA channel alloc failed: %d\n", ret);
+ return ret;
}
if (dma_to_memory) {
@@ -938,7 +936,6 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
dma_buf = tup->uport.state->xmit.buf;
}
- dma_sconfig.slave_id = tup->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tup->uport.mapbase;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -1222,17 +1219,8 @@ static int tegra_uart_parse_dt(struct platform_device *pdev,
struct tegra_uart_port *tup)
{
struct device_node *np = pdev->dev.of_node;
- u32 of_dma[2];
int port;
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0) {
- tup->dma_req_sel = of_dma[1];
- } else {
- dev_err(&pdev->dev, "missing dma requestor in device tree\n");
- return -EINVAL;
- }
-
port = of_alias_get_id(np, "serial");
if (port < 0) {
dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
@@ -1320,6 +1308,12 @@ static int tegra_uart_probe(struct platform_device *pdev)
return PTR_ERR(tup->uart_clk);
}
+ tup->rst = devm_reset_control_get(&pdev->dev, "serial");
+ if (IS_ERR(tup->rst)) {
+ dev_err(&pdev->dev, "Couldn't get the reset\n");
+ return PTR_ERR(tup->rst);
+ }
+
u->iotype = UPIO_MEM32;
u->irq = platform_get_irq(pdev, 0);
u->regshift = 2;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7d8103cd3e2e..be33d2b0613b 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -23,35 +23,35 @@
#undef DEBUG
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
#include <linux/errno.h>
-#include <linux/sh_dma.h>
-#include <linux/timer.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/sysrq.h>
#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/module.h>
#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/ctype.h>
-#include <linux/err.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#ifdef CONFIG_SUPERH
#include <asm/sh_bios.h>
@@ -59,11 +59,32 @@
#include "sh-sci.h"
+/* Offsets into the sci_port->irqs array */
+enum {
+ SCIx_ERI_IRQ,
+ SCIx_RXI_IRQ,
+ SCIx_TXI_IRQ,
+ SCIx_BRI_IRQ,
+ SCIx_NR_IRQS,
+
+ SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */
+};
+
+#define SCIx_IRQ_IS_MUXED(port) \
+ ((port)->irqs[SCIx_ERI_IRQ] == \
+ (port)->irqs[SCIx_RXI_IRQ]) || \
+ ((port)->irqs[SCIx_ERI_IRQ] && \
+ ((port)->irqs[SCIx_RXI_IRQ] < 0))
+
struct sci_port {
struct uart_port port;
/* Platform configuration */
struct plat_sci_port *cfg;
+ int overrun_bit;
+ unsigned int error_mask;
+ unsigned int sampling_rate;
+
/* Break timer */
struct timer_list break_timer;
@@ -74,8 +95,8 @@ struct sci_port {
/* Function clock */
struct clk *fclk;
+ int irqs[SCIx_NR_IRQS];
char *irqstr[SCIx_NR_IRQS];
- char *gpiostr[SCIx_NR_FNS];
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
@@ -421,9 +442,9 @@ static void sci_port_enable(struct sci_port *sci_port)
pm_runtime_get_sync(sci_port->port.dev);
- clk_enable(sci_port->iclk);
+ clk_prepare_enable(sci_port->iclk);
sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
- clk_enable(sci_port->fclk);
+ clk_prepare_enable(sci_port->fclk);
}
static void sci_port_disable(struct sci_port *sci_port)
@@ -431,8 +452,16 @@ static void sci_port_disable(struct sci_port *sci_port)
if (!sci_port->port.dev)
return;
- clk_disable(sci_port->fclk);
- clk_disable(sci_port->iclk);
+ /* Cancel the break timer to ensure that the timer handler will not try
+ * to access the hardware with clocks and power disabled. Reset the
+ * break flag to make the break debouncing state machine ready for the
+ * next break.
+ */
+ del_timer_sync(&sci_port->break_timer);
+ sci_port->break_flag = 0;
+
+ clk_disable_unprepare(sci_port->fclk);
+ clk_disable_unprepare(sci_port->iclk);
pm_runtime_put_sync(sci_port->port.dev);
}
@@ -557,7 +586,7 @@ static inline int sci_rxd_in(struct uart_port *port)
return 1;
/* Cast for ARM damage */
- return !!__raw_readb((void __iomem *)s->cfg->port_reg);
+ return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg);
}
/* ********************************************************************** *
@@ -733,8 +762,6 @@ static void sci_break_timer(unsigned long data)
{
struct sci_port *port = (struct sci_port *)data;
- sci_port_enable(port);
-
if (sci_rxd_in(&port->port) == 0) {
port->break_flag = 1;
sci_schedule_break_timer(port);
@@ -744,8 +771,6 @@ static void sci_break_timer(unsigned long data)
sci_schedule_break_timer(port);
} else
port->break_flag = 0;
-
- sci_port_disable(port);
}
static int sci_handle_errors(struct uart_port *port)
@@ -755,19 +780,15 @@ static int sci_handle_errors(struct uart_port *port)
struct tty_port *tport = &port->state->port;
struct sci_port *s = to_sci_port(port);
- /*
- * Handle overruns, if supported.
- */
- if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
- if (status & (1 << s->cfg->overrun_bit)) {
- port->icount.overrun++;
+ /* Handle overruns */
+ if (status & (1 << s->overrun_bit)) {
+ port->icount.overrun++;
- /* overrun error */
- if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
- copied++;
+ /* overrun error */
+ if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
+ copied++;
- dev_notice(port->dev, "overrun error");
- }
+ dev_notice(port->dev, "overrun error");
}
if (status & SCxSR_FER(port)) {
@@ -829,7 +850,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
if (!reg->size)
return 0;
- if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
+ if ((serial_port_in(port, SCLSR) & (1 << s->overrun_bit))) {
serial_port_out(port, SCLSR, 0);
port->icount.overrun++;
@@ -1075,19 +1096,19 @@ static int sci_request_irq(struct sci_port *port)
for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
struct sci_irq_desc *desc;
- unsigned int irq;
+ int irq;
if (SCIx_IRQ_IS_MUXED(port)) {
i = SCIx_MUX_IRQ;
irq = up->irq;
} else {
- irq = port->cfg->irqs[i];
+ irq = port->irqs[i];
/*
* Certain port types won't support all of the
* available interrupt sources.
*/
- if (unlikely(!irq))
+ if (unlikely(irq < 0))
continue;
}
@@ -1112,7 +1133,7 @@ static int sci_request_irq(struct sci_port *port)
out_noirq:
while (--i >= 0)
- free_irq(port->cfg->irqs[i], port);
+ free_irq(port->irqs[i], port);
out_nomem:
while (--j >= 0)
@@ -1130,16 +1151,16 @@ static void sci_free_irq(struct sci_port *port)
* IRQ first.
*/
for (i = 0; i < SCIx_NR_IRQS; i++) {
- unsigned int irq = port->cfg->irqs[i];
+ int irq = port->irqs[i];
/*
* Certain port types won't support all of the available
* interrupt sources.
*/
- if (unlikely(!irq))
+ if (unlikely(irq < 0))
continue;
- free_irq(port->cfg->irqs[i], port);
+ free_irq(port->irqs[i], port);
kfree(port->irqstr[i]);
if (SCIx_IRQ_IS_MUXED(port)) {
@@ -1149,67 +1170,6 @@ static void sci_free_irq(struct sci_port *port)
}
}
-static const char *sci_gpio_names[SCIx_NR_FNS] = {
- "sck", "rxd", "txd", "cts", "rts",
-};
-
-static const char *sci_gpio_str(unsigned int index)
-{
- return sci_gpio_names[index];
-}
-
-static void sci_init_gpios(struct sci_port *port)
-{
- struct uart_port *up = &port->port;
- int i;
-
- if (!port->cfg)
- return;
-
- for (i = 0; i < SCIx_NR_FNS; i++) {
- const char *desc;
- int ret;
-
- if (!port->cfg->gpios[i])
- continue;
-
- desc = sci_gpio_str(i);
-
- port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s",
- dev_name(up->dev), desc);
-
- /*
- * If we've failed the allocation, we can still continue
- * on with a NULL string.
- */
- if (!port->gpiostr[i])
- dev_notice(up->dev, "%s string allocation failure\n",
- desc);
-
- ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]);
- if (unlikely(ret != 0)) {
- dev_notice(up->dev, "failed %s gpio request\n", desc);
-
- /*
- * If we can't get the GPIO for whatever reason,
- * no point in keeping the verbose string around.
- */
- kfree(port->gpiostr[i]);
- }
- }
-}
-
-static void sci_free_gpios(struct sci_port *port)
-{
- int i;
-
- for (i = 0; i < SCIx_NR_FNS; i++)
- if (port->cfg->gpios[i]) {
- gpio_free(port->cfg->gpios[i]);
- kfree(port->gpiostr[i]);
- }
-}
-
static unsigned int sci_tx_empty(struct uart_port *port)
{
unsigned short status = serial_port_in(port, SCxSR);
@@ -1309,7 +1269,7 @@ static int sci_dma_rx_push(struct sci_port *s, size_t count)
}
if (room < count)
- dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+ dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
count - room);
if (!room)
return room;
@@ -1442,7 +1402,7 @@ static void work_fn_rx(struct work_struct *work)
int count;
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
- dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
+ dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
sh_desc->partial, sh_desc->cookie);
spin_lock_irqsave(&port->lock, flags);
@@ -1655,7 +1615,7 @@ static void rx_timer_fn(unsigned long arg)
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
scr &= ~0x4000;
- enable_irq(s->cfg->irqs[1]);
+ enable_irq(s->irqs[SCIx_RXI_IRQ]);
}
serial_port_out(port, SCSCR, scr | SCSCR_RIE);
dev_dbg(port->dev, "DMA Rx timed out\n");
@@ -1691,16 +1651,17 @@ static void sci_request_dma(struct uart_port *port)
s->chan_tx = chan;
sg_init_table(&s->sg_tx, 1);
/* UART circular tx buffer is an aligned page. */
- BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+ BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
- UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
+ UART_XMIT_SIZE,
+ (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
if (!nent)
sci_tx_dma_release(s, false);
else
- dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
- sg_dma_len(&s->sg_tx),
- port->state->xmit.buf, sg_dma_address(&s->sg_tx));
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
+ sg_dma_len(&s->sg_tx), port->state->xmit.buf,
+ &sg_dma_address(&s->sg_tx));
s->sg_len_tx = nent;
@@ -1740,7 +1701,7 @@ static void sci_request_dma(struct uart_port *port)
sg_init_table(sg, 1);
sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
- (int)buf[i] & ~PAGE_MASK);
+ (uintptr_t)buf[i] & ~PAGE_MASK);
sg_dma_address(sg) = dma[i];
}
@@ -1808,21 +1769,11 @@ static void sci_shutdown(struct uart_port *port)
sci_free_irq(s);
}
-static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
+static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
unsigned long freq)
{
- switch (algo_id) {
- case SCBRR_ALGO_1:
- return ((freq + 16 * bps) / (16 * bps) - 1);
- case SCBRR_ALGO_2:
- return ((freq + 16 * bps) / (32 * bps) - 1);
- case SCBRR_ALGO_3:
- return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
- case SCBRR_ALGO_4:
- return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
- case SCBRR_ALGO_5:
- return (((freq * 1000 / 32) / bps) - 1);
- }
+ if (s->sampling_rate)
+ return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1;
/* Warn, but use a safe default */
WARN_ON(1);
@@ -1903,12 +1854,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
if (likely(baud && port->uartclk)) {
- if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
+ if (s->cfg->type == PORT_HSCIF) {
sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
&cks);
} else {
- t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
- port->uartclk);
+ t = sci_scbrr_calc(s, baud, port->uartclk);
for (cks = 0; t >= 256 && cks <= 3; cks++)
t >>= 2;
}
@@ -2115,10 +2065,6 @@ static void sci_config_port(struct uart_port *port, int flags)
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- struct sci_port *s = to_sci_port(port);
-
- if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
- return -EINVAL;
if (ser->baud_base < 2400)
/* No paper tape reader for Mitch.. */
return -EINVAL;
@@ -2151,11 +2097,13 @@ static struct uart_ops sci_uart_ops = {
};
static int sci_init_single(struct platform_device *dev,
- struct sci_port *sci_port,
- unsigned int index,
- struct plat_sci_port *p)
+ struct sci_port *sci_port, unsigned int index,
+ struct plat_sci_port *p, bool early)
{
struct uart_port *port = &sci_port->port;
+ const struct resource *res;
+ unsigned int sampling_rate;
+ unsigned int i;
int ret;
sci_port->cfg = p;
@@ -2164,31 +2112,76 @@ static int sci_init_single(struct platform_device *dev,
port->iotype = UPIO_MEM;
port->line = index;
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENOMEM;
+
+ port->mapbase = res->start;
+
+ for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+ sci_port->irqs[i] = platform_get_irq(dev, i);
+
+ /* The SCI generates several interrupts. They can be muxed together or
+ * connected to different interrupt lines. In the muxed case only one
+ * interrupt resource is specified. In the non-muxed case three or four
+ * interrupt resources are specified, as the BRI interrupt is optional.
+ */
+ if (sci_port->irqs[0] < 0)
+ return -ENXIO;
+
+ if (sci_port->irqs[1] < 0) {
+ sci_port->irqs[1] = sci_port->irqs[0];
+ sci_port->irqs[2] = sci_port->irqs[0];
+ sci_port->irqs[3] = sci_port->irqs[0];
+ }
+
+ if (p->regtype == SCIx_PROBE_REGTYPE) {
+ ret = sci_probe_regmap(p);
+ if (unlikely(ret))
+ return ret;
+ }
+
switch (p->type) {
case PORT_SCIFB:
port->fifosize = 256;
+ sci_port->overrun_bit = 9;
+ sampling_rate = 16;
break;
case PORT_HSCIF:
port->fifosize = 128;
+ sampling_rate = 0;
+ sci_port->overrun_bit = 0;
break;
case PORT_SCIFA:
port->fifosize = 64;
+ sci_port->overrun_bit = 9;
+ sampling_rate = 16;
break;
case PORT_SCIF:
port->fifosize = 16;
+ if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
+ sci_port->overrun_bit = 9;
+ sampling_rate = 16;
+ } else {
+ sci_port->overrun_bit = 0;
+ sampling_rate = 32;
+ }
break;
default:
port->fifosize = 1;
+ sci_port->overrun_bit = 5;
+ sampling_rate = 32;
break;
}
- if (p->regtype == SCIx_PROBE_REGTYPE) {
- ret = sci_probe_regmap(p);
- if (unlikely(ret))
- return ret;
- }
+ /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't
+ * match the SoC datasheet, this should be investigated. Let platform
+ * data override the sampling rate for now.
+ */
+ sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate
+ : sampling_rate;
- if (dev) {
+ if (!early) {
sci_port->iclk = clk_get(&dev->dev, "sci_ick");
if (IS_ERR(sci_port->iclk)) {
sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
@@ -2208,8 +2201,6 @@ static int sci_init_single(struct platform_device *dev,
port->dev = &dev->dev;
- sci_init_gpios(sci_port);
-
pm_runtime_enable(&dev->dev);
}
@@ -2220,32 +2211,22 @@ static int sci_init_single(struct platform_device *dev,
/*
* Establish some sensible defaults for the error detection.
*/
- if (!p->error_mask)
- p->error_mask = (p->type == PORT_SCI) ?
+ sci_port->error_mask = (p->type == PORT_SCI) ?
SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
/*
* Establish sensible defaults for the overrun detection, unless
* the part has explicitly disabled support for it.
*/
- if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
- if (p->type == PORT_SCI)
- p->overrun_bit = 5;
- else if (p->scbrr_algo_id == SCBRR_ALGO_4)
- p->overrun_bit = 9;
- else
- p->overrun_bit = 0;
- /*
- * Make the error mask inclusive of overrun detection, if
- * supported.
- */
- p->error_mask |= (1 << p->overrun_bit);
- }
+ /*
+ * Make the error mask inclusive of overrun detection, if
+ * supported.
+ */
+ sci_port->error_mask |= 1 << sci_port->overrun_bit;
- port->mapbase = p->mapbase;
port->type = p->type;
- port->flags = p->flags;
+ port->flags = UPF_FIXED_PORT | p->flags;
port->regshift = p->regshift;
/*
@@ -2255,7 +2236,7 @@ static int sci_init_single(struct platform_device *dev,
*
* For the muxed case there's nothing more to do.
*/
- port->irq = p->irqs[SCIx_RXI_IRQ];
+ port->irq = sci_port->irqs[SCIx_RXI_IRQ];
port->irqflags = 0;
port->serial_in = sci_serial_in;
@@ -2270,8 +2251,6 @@ static int sci_init_single(struct platform_device *dev,
static void sci_cleanup_single(struct sci_port *port)
{
- sci_free_gpios(port);
-
clk_put(port->iclk);
clk_put(port->fclk);
@@ -2387,7 +2366,7 @@ static int sci_probe_earlyprintk(struct platform_device *pdev)
early_serial_console.index = pdev->id;
- sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg);
+ sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
serial_console_setup(&early_serial_console, early_serial_buf);
@@ -2437,6 +2416,83 @@ static int sci_remove(struct platform_device *dev)
return 0;
}
+struct sci_port_info {
+ unsigned int type;
+ unsigned int regtype;
+};
+
+static const struct of_device_id of_sci_match[] = {
+ {
+ .compatible = "renesas,scif",
+ .data = (void *)&(const struct sci_port_info) {
+ .type = PORT_SCIF,
+ .regtype = SCIx_SH4_SCIF_REGTYPE,
+ },
+ }, {
+ .compatible = "renesas,scifa",
+ .data = (void *)&(const struct sci_port_info) {
+ .type = PORT_SCIFA,
+ .regtype = SCIx_SCIFA_REGTYPE,
+ },
+ }, {
+ .compatible = "renesas,scifb",
+ .data = (void *)&(const struct sci_port_info) {
+ .type = PORT_SCIFB,
+ .regtype = SCIx_SCIFB_REGTYPE,
+ },
+ }, {
+ .compatible = "renesas,hscif",
+ .data = (void *)&(const struct sci_port_info) {
+ .type = PORT_HSCIF,
+ .regtype = SCIx_HSCIF_REGTYPE,
+ },
+ }, {
+ /* Terminator */
+ },
+};
+MODULE_DEVICE_TABLE(of, of_sci_match);
+
+static struct plat_sci_port *
+sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ const struct sci_port_info *info;
+ struct plat_sci_port *p;
+ int id;
+
+ if (!IS_ENABLED(CONFIG_OF) || !np)
+ return NULL;
+
+ match = of_match_node(of_sci_match, pdev->dev.of_node);
+ if (!match)
+ return NULL;
+
+ info = match->data;
+
+ p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
+ if (!p) {
+ dev_err(&pdev->dev, "failed to allocate DT config data\n");
+ return NULL;
+ }
+
+ /* Get the line number for the aliases node. */
+ id = of_alias_get_id(np, "serial");
+ if (id < 0) {
+ dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
+ return NULL;
+ }
+
+ *dev_id = id;
+
+ p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+ p->type = info->type;
+ p->regtype = info->regtype;
+ p->scscr = SCSCR_RE | SCSCR_TE;
+
+ return p;
+}
+
static int sci_probe_single(struct platform_device *dev,
unsigned int index,
struct plat_sci_port *p,
@@ -2454,7 +2510,7 @@ static int sci_probe_single(struct platform_device *dev,
return -EINVAL;
}
- ret = sci_init_single(dev, sciport, index, p);
+ ret = sci_init_single(dev, sciport, index, p, false);
if (ret)
return ret;
@@ -2469,8 +2525,9 @@ static int sci_probe_single(struct platform_device *dev,
static int sci_probe(struct platform_device *dev)
{
- struct plat_sci_port *p = dev_get_platdata(&dev->dev);
- struct sci_port *sp = &sci_ports[dev->id];
+ struct plat_sci_port *p;
+ struct sci_port *sp;
+ unsigned int dev_id;
int ret;
/*
@@ -2481,9 +2538,24 @@ static int sci_probe(struct platform_device *dev)
if (is_early_platform_device(dev))
return sci_probe_earlyprintk(dev);
+ if (dev->dev.of_node) {
+ p = sci_parse_dt(dev, &dev_id);
+ if (p == NULL)
+ return -EINVAL;
+ } else {
+ p = dev->dev.platform_data;
+ if (p == NULL) {
+ dev_err(&dev->dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ dev_id = dev->id;
+ }
+
+ sp = &sci_ports[dev_id];
platform_set_drvdata(dev, sp);
- ret = sci_probe_single(dev, dev->id, p, sp);
+ ret = sci_probe_single(dev, dev_id, p, sp);
if (ret)
return ret;
@@ -2535,6 +2607,7 @@ static struct platform_driver sci_driver = {
.name = "sh-sci",
.owner = THIS_MODULE,
.pm = &sci_dev_pm_ops,
+ .of_match_table = of_match_ptr(of_sci_match),
},
};
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 5aca7364634c..d5db81a0a430 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -9,7 +9,7 @@
#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
-#define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask)
+#define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index a4fdce74f883..b0e540137e39 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -67,7 +67,7 @@ static void tty_audit_log(const char *description, int major, int minor,
struct task_struct *tsk = current;
uid_t uid = from_kuid(&init_user_ns, task_uid(tsk));
uid_t loginuid = from_kuid(&init_user_ns, audit_get_loginuid(tsk));
- u32 sessionid = audit_get_sessionid(tsk);
+ unsigned int sessionid = audit_get_sessionid(tsk);
ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_TTY);
if (ab) {
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 01:07:35 +0000