diff options
Diffstat (limited to 'drivers/media/pci/cx18')
-rw-r--r-- | drivers/media/pci/cx18/cx18-alsa-main.c | 8 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-av-core.c | 17 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-av-firmware.c | 3 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-controls.c | 9 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-driver.c | 35 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-dvb.c | 6 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-fileops.c | 6 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-ioctl.c | 6 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-irq.c | 4 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-mailbox.c | 39 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-queue.c | 8 | ||||
-rw-r--r-- | drivers/media/pci/cx18/cx18-streams.c | 7 |
12 files changed, 58 insertions, 90 deletions
diff --git a/drivers/media/pci/cx18/cx18-alsa-main.c b/drivers/media/pci/cx18/cx18-alsa-main.c index 0b0e8015ad34..9fb7f5978c8b 100644 --- a/drivers/media/pci/cx18/cx18-alsa-main.c +++ b/drivers/media/pci/cx18/cx18-alsa-main.c @@ -217,8 +217,8 @@ static int cx18_alsa_load(struct cx18 *cx) s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM]; if (s->video_dev.v4l2_dev == NULL) { - CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - " - "skipping\n", __func__); + CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n", + __func__); return 0; } @@ -232,8 +232,8 @@ static int cx18_alsa_load(struct cx18 *cx) CX18_ALSA_ERR("%s: failed to create struct snd_cx18_card\n", __func__); } else { - CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance " - "\n", __func__); + CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance\n", + __func__); } return 0; } diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c index 30bbe8d1ea55..7f7306fd9a7f 100644 --- a/drivers/media/pci/cx18/cx18-av-core.c +++ b/drivers/media/pci/cx18/cx18-av-core.c @@ -468,21 +468,19 @@ void cx18_av_std_setup(struct cx18 *cx) CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n", pll / 8000000, (pll / 8) % 1000000); - CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio " - "= %d.%03d\n", src_decimation / 256, + CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio = %d.%03d\n", + src_decimation / 256, ((src_decimation % 256) * 1000) / 256); tmp = 28636360 * (u64) sc; do_div(tmp, src_decimation); fsc = tmp >> 13; CX18_DEBUG_INFO_DEV(sd, - "Chroma sub-carrier initial freq = %d.%06d " - "MHz\n", fsc / 1000000, fsc % 1000000); + "Chroma sub-carrier initial freq = %d.%06d MHz\n", + fsc / 1000000, fsc % 1000000); - CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, " - "vactive %i, vblank656 %i, src_dec %i, " - "burst 0x%02x, luma_lpf %i, uv_lpf %i, " - "comb 0x%02x, sc 0x%06x\n", + CX18_DEBUG_INFO_DEV(sd, + "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n", hblank, hactive, vblank, vactive, vblank656, src_decimation, burst, luma_lpf, uv_lpf, comb, sc); @@ -1069,8 +1067,7 @@ static void log_video_status(struct cx18 *cx) CX18_INFO_DEV(sd, "Specified video input: Composite %d\n", vid_input - CX18_AV_COMPOSITE1 + 1); } else { - CX18_INFO_DEV(sd, "Specified video input: " - "S-Video (Luma In%d, Chroma In%d)\n", + CX18_INFO_DEV(sd, "Specified video input: S-Video (Luma In%d, Chroma In%d)\n", (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8); } diff --git a/drivers/media/pci/cx18/cx18-av-firmware.c b/drivers/media/pci/cx18/cx18-av-firmware.c index a34fd082b76e..160e2e53383f 100644 --- a/drivers/media/pci/cx18/cx18-av-firmware.c +++ b/drivers/media/pci/cx18/cx18-av-firmware.c @@ -61,8 +61,7 @@ static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw) dl_control &= 0xffff3fff; /* ignore top 2 bits of address */ expected = 0x0f000000 | ((u32)data[addr] << 16) | addr; if (expected != dl_control) { - CX18_ERR_DEV(sd, "verification of %s firmware load " - "failed: expected %#010x got %#010x\n", + CX18_ERR_DEV(sd, "verification of %s firmware load failed: expected %#010x got %#010x\n", FWFILE, expected, dl_control); ret = -EIO; break; diff --git a/drivers/media/pci/cx18/cx18-controls.c b/drivers/media/pci/cx18/cx18-controls.c index adb5a8c72c06..812a2507945a 100644 --- a/drivers/media/pci/cx18/cx18-controls.c +++ b/drivers/media/pci/cx18/cx18-controls.c @@ -44,8 +44,7 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) { /* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */ cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE; - CX18_DEBUG_INFO("disabled insertion of sliced VBI data into " - "the MPEG stream\n"); + CX18_DEBUG_INFO("disabled insertion of sliced VBI data into the MPEG stream\n"); return 0; } @@ -63,16 +62,14 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) } cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE; - CX18_WARN("Unable to allocate buffers for " - "sliced VBI data insertion\n"); + CX18_WARN("Unable to allocate buffers for sliced VBI data insertion\n"); return -ENOMEM; } } } cx->vbi.insert_mpeg = fmt; - CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS," - "when sliced VBI is enabled\n"); + CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,when sliced VBI is enabled\n"); /* * If our current settings have no lines set for capture, store a valid, diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c index 2f23b26b16c0..b8eedbe51c8f 100644 --- a/drivers/media/pci/cx18/cx18-driver.c +++ b/drivers/media/pci/cx18/cx18-driver.c @@ -405,8 +405,8 @@ static void cx18_process_eeprom(struct cx18 *cx) CX18_ERR("Invalid EEPROM\n"); return; default: - CX18_ERR("Unknown model %d, defaulting to original HVR-1600 " - "(cardtype=1)\n", tv.model); + CX18_ERR("Unknown model %d, defaulting to original HVR-1600 (cardtype=1)\n", + tv.model); cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); break; } @@ -635,8 +635,8 @@ static void cx18_process_options(struct cx18 *cx) /* convert from kB to bytes */ cx->stream_buf_size[i] *= 1024; } - CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, " - "%d bytes\n", i, cx->options.megabytes[i], + CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, %d bytes\n", + i, cx->options.megabytes[i], cx->stream_buffers[i], cx->stream_buf_size[i]); } @@ -838,14 +838,13 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency); if (pci_latency < 64 && cx18_pci_latency) { - CX18_INFO("Unreasonably low latency timer, " - "setting to 64 (was %d)\n", pci_latency); + CX18_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n", + pci_latency); pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency); } - CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " - "irq: %d, latency: %d, memory: 0x%llx\n", + CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n", cx->pci_dev->device, cx->card_rev, pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn), cx->pci_dev->irq, pci_latency, (u64)cx->base_addr); @@ -910,8 +909,8 @@ static int cx18_probe(struct pci_dev *pci_dev, /* FIXME - module parameter arrays constrain max instances */ i = atomic_inc_return(&cx18_instance) - 1; if (i >= CX18_MAX_CARDS) { - printk(KERN_ERR "cx18: cannot manage card %d, driver has a " - "limit of 0 - %d\n", i, CX18_MAX_CARDS - 1); + printk(KERN_ERR "cx18: cannot manage card %d, driver has a limit of 0 - %d\n", + i, CX18_MAX_CARDS - 1); return -ENOMEM; } @@ -926,8 +925,8 @@ static int cx18_probe(struct pci_dev *pci_dev, retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev); if (retval) { - printk(KERN_ERR "cx18: v4l2_device_register of card %d failed" - "\n", cx->instance); + printk(KERN_ERR "cx18: v4l2_device_register of card %d failed\n", + cx->instance); kfree(cx); return retval; } @@ -958,13 +957,10 @@ static int cx18_probe(struct pci_dev *pci_dev, cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); if (!cx->enc_mem) { - CX18_ERR("ioremap failed. Can't get a window into CX23418 " - "memory and register space\n"); - CX18_ERR("Each capture card with a CX23418 needs 64 MB of " - "vmalloc address space for the window\n"); + CX18_ERR("ioremap failed. Can't get a window into CX23418 memory and register space\n"); + CX18_ERR("Each capture card with a CX23418 needs 64 MB of vmalloc address space for the window\n"); CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); - CX18_ERR("Use the vmalloc= kernel command line option to set " - "VmallocTotal to a larger value\n"); + CX18_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n"); retval = -ENOMEM; goto free_mem; } @@ -1000,8 +996,7 @@ static int cx18_probe(struct pci_dev *pci_dev, /* Initialize GPIO Reset Controller to do chip resets during i2c init */ if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) { if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0) - CX18_WARN("Could not register GPIO reset controller" - "subdevice; proceeding anyway.\n"); + CX18_WARN("Could not register GPIO reset controllersubdevice; proceeding anyway.\n"); else cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL; } diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c index 3eac59c51231..03d0478170a7 100644 --- a/drivers/media/pci/cx18/cx18-dvb.c +++ b/drivers/media/pci/cx18/cx18-dvb.c @@ -155,10 +155,8 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, } if (ret) { - CX18_ERR("The MPC718 board variant with the MT352 DVB-T" - "demodualtor will not work without it\n"); - CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " - "mpc718' if you need the firmware\n"); + CX18_ERR("The MPC718 board variant with the MT352 DVB-Tdemodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware mpc718' if you need the firmware\n"); } return ret; } diff --git a/drivers/media/pci/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c index df837408efd5..78b399b8613e 100644 --- a/drivers/media/pci/cx18/cx18-fileops.c +++ b/drivers/media/pci/cx18/cx18-fileops.c @@ -49,8 +49,7 @@ int cx18_claim_stream(struct cx18_open_id *id, int type) /* Nothing should ever try to directly claim the IDX stream */ if (type == CX18_ENC_STREAM_TYPE_IDX) { - CX18_WARN("MPEG Index stream cannot be claimed " - "directly, but something tried.\n"); + CX18_WARN("MPEG Index stream cannot be claimed directly, but something tried.\n"); return -EINVAL; } @@ -728,8 +727,7 @@ void cx18_stop_capture(struct cx18_open_id *id, int gop_end) /* Stop internal use associated VBI and IDX streams */ if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) && !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) { - CX18_DEBUG_INFO("close stopping embedded VBI " - "capture\n"); + CX18_DEBUG_INFO("close stopping embedded VBI capture\n"); cx18_stop_v4l2_encode_stream(s_vbi, 0); } if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) { diff --git a/drivers/media/pci/cx18/cx18-ioctl.c b/drivers/media/pci/cx18/cx18-ioctl.c index fecca2a63891..0faeb979ceb9 100644 --- a/drivers/media/pci/cx18/cx18-ioctl.c +++ b/drivers/media/pci/cx18/cx18-ioctl.c @@ -951,8 +951,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return 0; h = cx18_find_handle(cx); if (h == CX18_INVALID_TASK_HANDLE) { - CX18_ERR("Can't find valid task handle for " - "V4L2_ENC_CMD_PAUSE\n"); + CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_PAUSE\n"); return -EBADFD; } cx18_mute(cx); @@ -968,8 +967,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return 0; h = cx18_find_handle(cx); if (h == CX18_INVALID_TASK_HANDLE) { - CX18_ERR("Can't find valid task handle for " - "V4L2_ENC_CMD_RESUME\n"); + CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_RESUME\n"); return -EBADFD; } cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h); diff --git a/drivers/media/pci/cx18/cx18-irq.c b/drivers/media/pci/cx18/cx18-irq.c index 80edfe93a3d8..361426485e98 100644 --- a/drivers/media/pci/cx18/cx18-irq.c +++ b/drivers/media/pci/cx18/cx18-irq.c @@ -59,8 +59,8 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2); if (sw1 || sw2 || hw2) - CX18_DEBUG_HI_IRQ("received interrupts " - "SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); + CX18_DEBUG_HI_IRQ("received interrupts SW1: %x SW2: %x HW2: %x\n", + sw1, sw2, hw2); /* * SW1 responses have to happen first. The sending XPU times out the diff --git a/drivers/media/pci/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c index 1f8aa9a749a1..d3cf3588879f 100644 --- a/drivers/media/pci/cx18/cx18-mailbox.c +++ b/drivers/media/pci/cx18/cx18-mailbox.c @@ -123,8 +123,8 @@ static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name) if (!(cx18_debug & CX18_DBGFLG_API)) return; - CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s" - "\n", name, mb->request, mb->ack, mb->cmd, mb->error, + CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s\n", + name, mb->request, mb->ack, mb->cmd, mb->error, u32arr2hex(mb->args, MAX_MB_ARGUMENTS, argstr)); } @@ -255,8 +255,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order) s = cx18_handle_to_stream(cx, handle); if (s == NULL) { - CX18_WARN("Got DMA done notification for unknown/inactive" - " handle %d, %s mailbox seq no %d\n", handle, + CX18_WARN("Got DMA done notification for unknown/inactive handle %d, %s mailbox seq no %d\n", + handle, (order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ? "stale" : "good", mb->request); return; @@ -290,9 +290,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order) if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) && !(id >= s->mdl_base_idx && id < (s->mdl_base_idx + s->buffers))) { - CX18_WARN("Fell behind! Ignoring stale mailbox with " - " inconsistent data. Lost MDL for mailbox " - "seq no %d\n", mb->request); + CX18_WARN("Fell behind! Ignoring stale mailbox with inconsistent data. Lost MDL for mailbox seq no %d\n", + mb->request); break; } mdl = cx18_queue_get_mdl(s, id, mdl_ack->data_used); @@ -418,9 +417,7 @@ static void mb_ack_irq(struct cx18 *cx, struct cx18_in_work_order *order) /* Don't ack if the RPU has gotten impatient and timed us out */ if (req != cx18_readl(cx, &ack_mb->request) || req == cx18_readl(cx, &ack_mb->ack)) { - CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " - "incoming %s to EPU mailbox (sequence no. %u) " - "while processing\n", + CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u) while processing\n", rpu_str[order->rpu], rpu_str[order->rpu], req); order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC; return; @@ -555,8 +552,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu) order = alloc_in_work_order_irq(cx); if (order == NULL) { - CX18_WARN("Unable to find blank work order form to schedule " - "incoming mailbox command processing\n"); + CX18_WARN("Unable to find blank work order form to schedule incoming mailbox command processing\n"); return; } @@ -573,9 +569,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu) (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i); if (order_mb->request == order_mb->ack) { - CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " - "incoming %s to EPU mailbox (sequence no. %u)" - "\n", + CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u)\n", rpu_str[rpu], rpu_str[rpu], order_mb->request); if (cx18_debug & CX18_DBGFLG_WARN) dump_mb(cx, order_mb, "incoming"); @@ -663,8 +657,8 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) if (req != ack) { /* waited long enough, make the mbox "not busy" from our end */ cx18_writel(cx, req, &mb->ack); - CX18_ERR("mbox was found stuck busy when setting up for %s; " - "clearing busy and trying to proceed\n", info->name); + CX18_ERR("mbox was found stuck busy when setting up for %s; clearing busy and trying to proceed\n", + info->name); } else if (ret != timeout) CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n", jiffies_to_msecs(timeout-ret)); @@ -707,14 +701,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) mutex_unlock(mb_lock); if (ret >= timeout) { /* Timed out */ - CX18_DEBUG_WARN("sending %s timed out waiting %d msecs " - "for RPU acknowledgement\n", + CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU acknowledgment\n", info->name, jiffies_to_msecs(ret)); } else { - CX18_DEBUG_WARN("woken up before mailbox ack was ready " - "after submitting %s to RPU. only " - "waited %d msecs on req %u but awakened" - " with unmatched ack %u\n", + CX18_DEBUG_WARN("woken up before mailbox ack was ready after submitting %s to RPU. only waited %d msecs on req %u but awakened with unmatched ack %u\n", info->name, jiffies_to_msecs(ret), req, ack); @@ -723,8 +713,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (ret >= timeout) - CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment " - "sending %s; timed out waiting %d msecs\n", + CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment sending %s; timed out waiting %d msecs\n", info->name, jiffies_to_msecs(ret)); else CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n", diff --git a/drivers/media/pci/cx18/cx18-queue.c b/drivers/media/pci/cx18/cx18-queue.c index 2a247d264b87..13e96d6055eb 100644 --- a/drivers/media/pci/cx18/cx18-queue.c +++ b/drivers/media/pci/cx18/cx18-queue.c @@ -164,9 +164,8 @@ struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id, mdl->skipped++; if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) { /* mdl must have fallen out of rotation */ - CX18_WARN("Skipped %s, MDL %d, %d " - "times - it must have dropped out of " - "rotation\n", s->name, mdl->id, + CX18_WARN("Skipped %s, MDL %d, %d times - it must have dropped out of rotation\n", + s->name, mdl->id, mdl->skipped); /* Sweep it up to put it back into rotation */ list_move_tail(&mdl->list, &sweep_up); @@ -352,8 +351,7 @@ int cx18_stream_alloc(struct cx18_stream *s) if (s->buffers == 0) return 0; - CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers " - "(%d.%02d kB total)\n", + CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%d.%02d kB total)\n", s->name, s->buffers, s->buf_size, s->buffers * s->buf_size / 1024, (s->buffers * s->buf_size * 100 / 1024) % 100); diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c index f3802ec1b383..7f699f0ee76c 100644 --- a/drivers/media/pci/cx18/cx18-streams.c +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -353,8 +353,8 @@ static int cx18_prep_dev(struct cx18 *cx, int type) if (cx->card->hw_all & CX18_HW_DVB) { s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL); if (s->dvb == NULL) { - CX18_ERR("Couldn't allocate cx18_dvb structure" - " for %s\n", s->name); + CX18_ERR("Couldn't allocate cx18_dvb structure for %s\n", + s->name); return -ENOMEM; } } else { @@ -462,8 +462,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type) case VFL_TYPE_VBI: if (cx->stream_buffers[type]) - CX18_INFO("Registered device %s for %s " - "(%d x %d bytes)\n", + CX18_INFO("Registered device %s for %s (%d x %d bytes)\n", name, s->name, cx->stream_buffers[type], cx->stream_buf_size[type]); else |