diff options
Diffstat (limited to 'arch/x86/include/asm')
| -rw-r--r-- | arch/x86/include/asm/mca.h | 43 | ||||
| -rw-r--r-- | arch/x86/include/asm/mca_dma.h | 201 | ||||
| -rw-r--r-- | arch/x86/include/asm/mpspec.h | 2 | ||||
| -rw-r--r-- | arch/x86/include/asm/mpspec_def.h | 3 |
4 files changed, 2 insertions, 247 deletions
diff --git a/arch/x86/include/asm/mca.h b/arch/x86/include/asm/mca.h deleted file mode 100644 index eedbb6cc1efb..000000000000 --- a/arch/x86/include/asm/mca.h +++ /dev/null @@ -1,43 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8 -*- */ - -/* Platform specific MCA defines */ -#ifndef _ASM_X86_MCA_H -#define _ASM_X86_MCA_H - -/* Maximal number of MCA slots - actually, some machines have less, but - * they all have sufficient number of POS registers to cover 8. - */ -#define MCA_MAX_SLOT_NR 8 - -/* Most machines have only one MCA bus. The only multiple bus machines - * I know have at most two */ -#define MAX_MCA_BUSSES 2 - -#define MCA_PRIMARY_BUS 0 -#define MCA_SECONDARY_BUS 1 - -/* Dummy slot numbers on primary MCA for integrated functions */ -#define MCA_INTEGSCSI (MCA_MAX_SLOT_NR) -#define MCA_INTEGVIDEO (MCA_MAX_SLOT_NR+1) -#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2) - -/* Dummy POS values for integrated functions */ -#define MCA_DUMMY_POS_START 0x10000 -#define MCA_INTEGSCSI_POS (MCA_DUMMY_POS_START+1) -#define MCA_INTEGVIDEO_POS (MCA_DUMMY_POS_START+2) -#define MCA_MOTHERBOARD_POS (MCA_DUMMY_POS_START+3) - -/* MCA registers */ - -#define MCA_MOTHERBOARD_SETUP_REG 0x94 -#define MCA_ADAPTER_SETUP_REG 0x96 -#define MCA_POS_REG(n) (0x100+(n)) - -#define MCA_ENABLED 0x01 /* POS 2, set if adapter enabled */ - -/* Max number of adapters, including both slots and various integrated - * things. - */ -#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3) - -#endif /* _ASM_X86_MCA_H */ diff --git a/arch/x86/include/asm/mca_dma.h b/arch/x86/include/asm/mca_dma.h deleted file mode 100644 index 45271aef82dd..000000000000 --- a/arch/x86/include/asm/mca_dma.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef _ASM_X86_MCA_DMA_H -#define _ASM_X86_MCA_DMA_H - -#include <asm/io.h> -#include <linux/ioport.h> - -/* - * Microchannel specific DMA stuff. DMA on an MCA machine is fairly similar to - * standard PC dma, but it certainly has its quirks. DMA register addresses - * are in a different place and there are some added functions. Most of this - * should be pretty obvious on inspection. Note that the user must divide - * count by 2 when using 16-bit dma; that is not handled by these functions. - * - * Ramen Noodles are yummy. - * - * 1998 Tymm Twillman <tymm@computer.org> - */ - -/* - * Registers that are used by the DMA controller; FN is the function register - * (tell the controller what to do) and EXE is the execution register (how - * to do it) - */ - -#define MCA_DMA_REG_FN 0x18 -#define MCA_DMA_REG_EXE 0x1A - -/* - * Functions that the DMA controller can do - */ - -#define MCA_DMA_FN_SET_IO 0x00 -#define MCA_DMA_FN_SET_ADDR 0x20 -#define MCA_DMA_FN_GET_ADDR 0x30 -#define MCA_DMA_FN_SET_COUNT 0x40 -#define MCA_DMA_FN_GET_COUNT 0x50 -#define MCA_DMA_FN_GET_STATUS 0x60 -#define MCA_DMA_FN_SET_MODE 0x70 -#define MCA_DMA_FN_SET_ARBUS 0x80 -#define MCA_DMA_FN_MASK 0x90 -#define MCA_DMA_FN_RESET_MASK 0xA0 -#define MCA_DMA_FN_MASTER_CLEAR 0xD0 - -/* - * Modes (used by setting MCA_DMA_FN_MODE in the function register) - * - * Note that the MODE_READ is read from memory (write to device), and - * MODE_WRITE is vice-versa. - */ - -#define MCA_DMA_MODE_XFER 0x04 /* read by default */ -#define MCA_DMA_MODE_READ 0x04 /* same as XFER */ -#define MCA_DMA_MODE_WRITE 0x08 /* OR with MODE_XFER to use */ -#define MCA_DMA_MODE_IO 0x01 /* DMA from IO register */ -#define MCA_DMA_MODE_16 0x40 /* 16 bit xfers */ - - -/** - * mca_enable_dma - channel to enable DMA on - * @dmanr: DMA channel - * - * Enable the MCA bus DMA on a channel. This can be called from - * IRQ context. - */ - -static inline void mca_enable_dma(unsigned int dmanr) -{ - outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN); -} - -/** - * mca_disble_dma - channel to disable DMA on - * @dmanr: DMA channel - * - * Enable the MCA bus DMA on a channel. This can be called from - * IRQ context. - */ - -static inline void mca_disable_dma(unsigned int dmanr) -{ - outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN); -} - -/** - * mca_set_dma_addr - load a 24bit DMA address - * @dmanr: DMA channel - * @a: 24bit bus address - * - * Load the address register in the DMA controller. This has a 24bit - * limitation (16Mb). - */ - -static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a) -{ - outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN); - outb(a & 0xff, MCA_DMA_REG_EXE); - outb((a >> 8) & 0xff, MCA_DMA_REG_EXE); - outb((a >> 16) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_get_dma_addr - load a 24bit DMA address - * @dmanr: DMA channel - * - * Read the address register in the DMA controller. This has a 24bit - * limitation (16Mb). The return is a bus address. - */ - -static inline unsigned int mca_get_dma_addr(unsigned int dmanr) -{ - unsigned int addr; - - outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN); - addr = inb(MCA_DMA_REG_EXE); - addr |= inb(MCA_DMA_REG_EXE) << 8; - addr |= inb(MCA_DMA_REG_EXE) << 16; - - return addr; -} - -/** - * mca_set_dma_count - load a 16bit transfer count - * @dmanr: DMA channel - * @count: count - * - * Set the DMA count for this channel. This can be up to 64Kbytes. - * Setting a count of zero will not do what you expect. - */ - -static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; /* transfers one more than count -- correct for this */ - - outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN); - outb(count & 0xff, MCA_DMA_REG_EXE); - outb((count >> 8) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_get_dma_residue - get the remaining bytes to transfer - * @dmanr: DMA channel - * - * This function returns the number of bytes left to transfer - * on this DMA channel. - */ - -static inline unsigned int mca_get_dma_residue(unsigned int dmanr) -{ - unsigned short count; - - outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN); - count = 1 + inb(MCA_DMA_REG_EXE); - count += inb(MCA_DMA_REG_EXE) << 8; - - return count; -} - -/** - * mca_set_dma_io - set the port for an I/O transfer - * @dmanr: DMA channel - * @io_addr: an I/O port number - * - * Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer - * with an I/O port target. - */ - -static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr) -{ - /* - * DMA from a port address -- set the io address - */ - - outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN); - outb(io_addr & 0xff, MCA_DMA_REG_EXE); - outb((io_addr >> 8) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_set_dma_mode - set the DMA mode - * @dmanr: DMA channel - * @mode: mode to set - * - * The DMA controller supports several modes. The mode values you can - * set are- - * - * %MCA_DMA_MODE_READ when reading from the DMA device. - * - * %MCA_DMA_MODE_WRITE to writing to the DMA device. - * - * %MCA_DMA_MODE_IO to do DMA to or from an I/O port. - * - * %MCA_DMA_MODE_16 to do 16bit transfers. - */ - -static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode) -{ - outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN); - outb(mode, MCA_DMA_REG_EXE); -} - -#endif /* _ASM_X86_MCA_DMA_H */ diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 9c7d95f6174b..3e2f42a4b872 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -40,7 +40,7 @@ extern int quad_local_to_mp_bus_id [NR_CPUS/4][4]; #endif /* CONFIG_X86_64 */ -#if defined(CONFIG_MCA) || defined(CONFIG_EISA) +#ifdef CONFIG_EISA extern int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h index c0a955a9a087..b31f8c098271 100644 --- a/arch/x86/include/asm/mpspec_def.h +++ b/arch/x86/include/asm/mpspec_def.h @@ -84,7 +84,7 @@ struct mpc_bus { #define BUSTYPE_EISA "EISA" #define BUSTYPE_ISA "ISA" #define BUSTYPE_INTERN "INTERN" /* Internal BUS */ -#define BUSTYPE_MCA "MCA" +#define BUSTYPE_MCA "MCA" /* Obsolete */ #define BUSTYPE_VL "VL" /* Local bus */ #define BUSTYPE_PCI "PCI" #define BUSTYPE_PCMCIA "PCMCIA" @@ -169,6 +169,5 @@ enum mp_bustype { MP_BUS_ISA = 1, MP_BUS_EISA, MP_BUS_PCI, - MP_BUS_MCA, }; #endif /* _ASM_X86_MPSPEC_DEF_H */ |