diff options
Diffstat (limited to 'arch/mips/pmc-sierra/msp71xx')
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/Makefile | 8 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_eth.c | 187 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_irq.c | 56 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c | 239 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_irq_per.c | 135 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c | 18 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_setup.c | 10 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_smp.c | 77 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_smtc.c | 105 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_time.c | 16 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_usb.c | 239 |
11 files changed, 930 insertions, 160 deletions
diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile index e107f79b1491..cefba7733b73 100644 --- a/arch/mips/pmc-sierra/msp71xx/Makefile +++ b/arch/mips/pmc-sierra/msp71xx/Makefile @@ -6,7 +6,9 @@ obj-y += msp_prom.o msp_setup.o msp_irq.o \ obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o -obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o +obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o obj-$(CONFIG_PCI) += msp_pci.o -obj-$(CONFIG_MSPETH) += msp_eth.o -obj-$(CONFIG_USB_MSP71XX) += msp_usb.o +obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o +obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o +obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o +obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o diff --git a/arch/mips/pmc-sierra/msp71xx/msp_eth.c b/arch/mips/pmc-sierra/msp71xx/msp_eth.c new file mode 100644 index 000000000000..c584df393de2 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_eth.c @@ -0,0 +1,187 @@ +/* + * The setup file for ethernet related hardware on PMC-Sierra MSP processors. + * + * Copyright 2010 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <msp_regs.h> +#include <msp_int.h> +#include <msp_gpio_macros.h> + + +#define MSP_ETHERNET_GPIO0 14 +#define MSP_ETHERNET_GPIO1 15 +#define MSP_ETHERNET_GPIO2 16 + +#ifdef CONFIG_MSP_HAS_TSMAC +#define MSP_TSMAC_SIZE 0x10020 +#define MSP_TSMAC_ID "pmc_tsmac" + +static struct resource msp_tsmac0_resources[] = { + [0] = { + .start = MSP_MAC0_BASE, + .end = MSP_MAC0_BASE + MSP_TSMAC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC0, + .end = MSP_INT_MAC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msp_tsmac1_resources[] = { + [0] = { + .start = MSP_MAC1_BASE, + .end = MSP_MAC1_BASE + MSP_TSMAC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC1, + .end = MSP_INT_MAC1, + .flags = IORESOURCE_IRQ, + }, +}; +static struct resource msp_tsmac2_resources[] = { + [0] = { + .start = MSP_MAC2_BASE, + .end = MSP_MAC2_BASE + MSP_TSMAC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_SAR, + .end = MSP_INT_SAR, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device tsmac_device[] = { + [0] = { + .name = MSP_TSMAC_ID, + .id = 0, + .num_resources = ARRAY_SIZE(msp_tsmac0_resources), + .resource = msp_tsmac0_resources, + }, + [1] = { + .name = MSP_TSMAC_ID, + .id = 1, + .num_resources = ARRAY_SIZE(msp_tsmac1_resources), + .resource = msp_tsmac1_resources, + }, + [2] = { + .name = MSP_TSMAC_ID, + .id = 2, + .num_resources = ARRAY_SIZE(msp_tsmac2_resources), + .resource = msp_tsmac2_resources, + }, +}; +#define msp_eth_devs tsmac_device + +#else +/* If it is not TSMAC assume MSP_ETH (100Mbps) */ +#define MSP_ETH_ID "pmc_mspeth" +#define MSP_ETH_SIZE 0xE0 +static struct resource msp_eth0_resources[] = { + [0] = { + .start = MSP_MAC0_BASE, + .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC0, + .end = MSP_INT_MAC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msp_eth1_resources[] = { + [0] = { + .start = MSP_MAC1_BASE, + .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC1, + .end = MSP_INT_MAC1, + .flags = IORESOURCE_IRQ, + }, +}; + + + +static struct platform_device mspeth_device[] = { + [0] = { + .name = MSP_ETH_ID, + .id = 0, + .num_resources = ARRAY_SIZE(msp_eth0_resources), + .resource = msp_eth0_resources, + }, + [1] = { + .name = MSP_ETH_ID, + .id = 1, + .num_resources = ARRAY_SIZE(msp_eth1_resources), + .resource = msp_eth1_resources, + }, + +}; +#define msp_eth_devs mspeth_device + +#endif +int __init msp_eth_setup(void) +{ + int i, ret = 0; + + /* Configure the GPIO and take the ethernet PHY out of reset */ + msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0); + msp_gpio_pin_hi(MSP_ETHERNET_GPIO0); + +#ifdef CONFIG_MSP_HAS_TSMAC + /* 3 phys on boards with TSMAC */ + msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO1); + msp_gpio_pin_hi(MSP_ETHERNET_GPIO1); + + msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO2); + msp_gpio_pin_hi(MSP_ETHERNET_GPIO2); +#endif + for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) { + ret = platform_device_register(&msp_eth_devs[i]); + printk(KERN_INFO "device: %d, return value = %d\n", i, ret); + if (ret) { + platform_device_unregister(&msp_eth_devs[i]); + break; + } + } + + if (ret) + printk(KERN_WARNING "Could not initialize " + "MSPETH device structures.\n"); + + return ret; +} +subsys_initcall(msp_eth_setup); diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq.c b/arch/mips/pmc-sierra/msp71xx/msp_irq.c index 734d598a2e3a..4531c4a514bc 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq.c @@ -19,8 +19,6 @@ #include <msp_int.h> -extern void msp_int_handle(void); - /* SLP bases systems */ extern void msp_slp_irq_init(void); extern void msp_slp_irq_dispatch(void); @@ -29,6 +27,18 @@ extern void msp_slp_irq_dispatch(void); extern void msp_cic_irq_init(void); extern void msp_cic_irq_dispatch(void); +/* VSMP support init */ +extern void msp_vsmp_int_init(void); + +/* vectored interrupt implementation */ + +/* SW0/1 interrupts are used for SMP/SMTC */ +static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); } +static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); } +static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); } +static inline void usb_int_dispatch(void) { do_IRQ(MSP_INT_USB); } +static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); } + /* * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded * hierarchical system. The first level are the direct MIPS interrupts @@ -96,29 +106,57 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs) do_IRQ(MSP_INT_SW1); } -static struct irqaction cascade_msp = { +static struct irqaction cic_cascade_msp = { .handler = no_action, - .name = "MSP cascade" + .name = "MSP CIC cascade" }; +static struct irqaction per_cascade_msp = { + .handler = no_action, + .name = "MSP PER cascade" +}; void __init arch_init_irq(void) { + /* assume we'll be using vectored interrupt mode except in UP mode*/ +#ifdef CONFIG_MIPS_MT + BUG_ON(!cpu_has_vint); +#endif /* initialize the 1st-level CPU based interrupt controller */ mips_cpu_irq_init(); #ifdef CONFIG_IRQ_MSP_CIC msp_cic_irq_init(); - +#ifdef CONFIG_MIPS_MT + set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch); + set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch); + set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch); + set_vi_handler(MSP_INT_SAR, mac2_int_dispatch); + set_vi_handler(MSP_INT_USB, usb_int_dispatch); + set_vi_handler(MSP_INT_SEC, sec_int_dispatch); +#ifdef CONFIG_MIPS_MT_SMP + msp_vsmp_int_init(); +#elif defined CONFIG_MIPS_MT_SMTC + /*Set hwmask for all platform devices */ + irq_hwmask[MSP_INT_MAC0] = C_IRQ0; + irq_hwmask[MSP_INT_MAC1] = C_IRQ1; + irq_hwmask[MSP_INT_USB] = C_IRQ2; + irq_hwmask[MSP_INT_SAR] = C_IRQ3; + irq_hwmask[MSP_INT_SEC] = C_IRQ5; + +#endif /* CONFIG_MIPS_MT_SMP */ +#endif /* CONFIG_MIPS_MT */ /* setup the cascaded interrupts */ - setup_irq(MSP_INT_CIC, &cascade_msp); - setup_irq(MSP_INT_PER, &cascade_msp); + setup_irq(MSP_INT_CIC, &cic_cascade_msp); + setup_irq(MSP_INT_PER, &per_cascade_msp); + #else /* setup the 2nd-level SLP register based interrupt controller */ + /* VSMP /SMTC support support is not enabled for SLP */ msp_slp_irq_init(); /* setup the cascaded SLP/PER interrupts */ - setup_irq(MSP_INT_SLP, &cascade_msp); - setup_irq(MSP_INT_PER, &cascade_msp); + setup_irq(MSP_INT_SLP, &cic_cascade_msp); + setup_irq(MSP_INT_PER, &per_cascade_msp); #endif } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c index 07e71ff2433f..352f29d9226f 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c @@ -1,8 +1,7 @@ /* - * This file define the irq handler for MSP SLM subsystem interrupts. + * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c * - * Copyright 2005-2007 PMC-Sierra, Inc, derived from irq_cpu.c - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * This file define the irq handler for MSP CIC subsystem interrupts. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -16,119 +15,203 @@ #include <linux/bitops.h> #include <linux/irq.h> +#include <asm/mipsregs.h> #include <asm/system.h> #include <msp_cic_int.h> #include <msp_regs.h> /* - * NOTE: We are only enabling support for VPE0 right now. + * External API */ +extern void msp_per_irq_init(void); +extern void msp_per_irq_dispatch(void); -static inline void unmask_msp_cic_irq(unsigned int irq) + +/* + * Convenience Macro. Should be somewhere generic. + */ +#define get_current_vpe() \ + ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) + +#ifdef CONFIG_SMP + +#define LOCK_VPE(flags, mtflags) \ +do { \ + local_irq_save(flags); \ + mtflags = dmt(); \ +} while (0) + +#define UNLOCK_VPE(flags, mtflags) \ +do { \ + emt(mtflags); \ + local_irq_restore(flags);\ +} while (0) + +#define LOCK_CORE(flags, mtflags) \ +do { \ + local_irq_save(flags); \ + mtflags = dvpe(); \ +} while (0) + +#define UNLOCK_CORE(flags, mtflags) \ +do { \ + evpe(mtflags); \ + local_irq_restore(flags);\ +} while (0) + +#else + +#define LOCK_VPE(flags, mtflags) +#define UNLOCK_VPE(flags, mtflags) +#endif + +/* ensure writes to cic are completed */ +static inline void cic_wmb(void) { + const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG; + volatile u32 dummy_read; - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *CIC_VPE0_MSK_REG |= (1 << (irq - MSP_CIC_INTBASE)); - else - *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE)); + wmb(); + dummy_read = __raw_readl(cic_mem); + dummy_read++; } -static inline void mask_msp_cic_irq(unsigned int irq) +static void unmask_cic_irq(struct irq_data *d) { - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *CIC_VPE0_MSK_REG &= ~(1 << (irq - MSP_CIC_INTBASE)); - else - *PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE)); + volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG; + int vpe; +#ifdef CONFIG_SMP + unsigned int mtflags; + unsigned long flags; + + /* + * Make sure we have IRQ affinity. It may have changed while + * we were processing the IRQ. + */ + if (!cpumask_test_cpu(smp_processor_id(), d->affinity)) + return; +#endif + + vpe = get_current_vpe(); + LOCK_VPE(flags, mtflags); + cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE)); + UNLOCK_VPE(flags, mtflags); + cic_wmb(); } -/* - * While we ack the interrupt interrupts are disabled and thus we don't need - * to deal with concurrency issues. Same for msp_cic_irq_end. - */ -static inline void ack_msp_cic_irq(unsigned int irq) +static void mask_cic_irq(struct irq_data *d) { - mask_msp_cic_irq(irq); - + volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG; + int vpe = get_current_vpe(); +#ifdef CONFIG_SMP + unsigned long flags, mtflags; +#endif + LOCK_VPE(flags, mtflags); + cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE)); + UNLOCK_VPE(flags, mtflags); + cic_wmb(); +} +static void msp_cic_irq_ack(struct irq_data *d) +{ + mask_cic_irq(d); /* - * only really necessary for 18, 16-14 and sometimes 3:0 (since - * these can be edge sensitive) but it doesn't hurt for the others. - */ - - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *CIC_STS_REG = (1 << (irq - MSP_CIC_INTBASE)); - else - *PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE)); + * Only really necessary for 18, 16-14 and sometimes 3:0 + * (since these can be edge sensitive) but it doesn't + * hurt for the others + */ + *CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE)); + smtc_im_ack_irq(d->irq); } +/*Note: Limiting to VSMP . Not tested in SMTC */ + +#ifdef CONFIG_MIPS_MT_SMP +static int msp_cic_irq_set_affinity(struct irq_data *d, + const struct cpumask *cpumask, bool force) +{ + int cpu; + unsigned long flags; + unsigned int mtflags; + unsigned long imask = (1 << (irq - MSP_CIC_INTBASE)); + volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG; + + /* timer balancing should be disabled in kernel code */ + BUG_ON(irq == MSP_INT_VPE0_TIMER || irq == MSP_INT_VPE1_TIMER); + + LOCK_CORE(flags, mtflags); + /* enable if any of each VPE's TCs require this IRQ */ + for_each_online_cpu(cpu) { + if (cpumask_test_cpu(cpu, cpumask)) + cic_mask[cpu] |= imask; + else + cic_mask[cpu] &= ~imask; + + } + + UNLOCK_CORE(flags, mtflags); + return 0; + +} +#endif + static struct irq_chip msp_cic_irq_controller = { .name = "MSP_CIC", - .ack = ack_msp_cic_irq, - .mask = ack_msp_cic_irq, - .mask_ack = ack_msp_cic_irq, - .unmask = unmask_msp_cic_irq, + .irq_mask = mask_cic_irq, + .irq_mask_ack = msp_cic_irq_ack, + .irq_unmask = unmask_cic_irq, + .irq_ack = msp_cic_irq_ack, +#ifdef CONFIG_MIPS_MT_SMP + .irq_set_affinity = msp_cic_irq_set_affinity, +#endif }; - void __init msp_cic_irq_init(void) { int i; - /* Mask/clear interrupts. */ *CIC_VPE0_MSK_REG = 0x00000000; - *PER_INT_MSK_REG = 0x00000000; + *CIC_VPE1_MSK_REG = 0x00000000; *CIC_STS_REG = 0xFFFFFFFF; - *PER_INT_STS_REG = 0xFFFFFFFF; - -#if defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_EVAL) /* - * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI. - * These inputs map to EXT_INT_POL[6:4] inside the CIC. - * They are to be active low, level sensitive. - */ + * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI. + * These inputs map to EXT_INT_POL[6:4] inside the CIC. + * They are to be active low, level sensitive. + */ *CIC_EXT_CFG_REG &= 0xFFFF8F8F; -#endif /* initialize all the IRQ descriptors */ - for (i = MSP_CIC_INTBASE; i < MSP_PER_INTBASE + 32; i++) + for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) { set_irq_chip_and_handler(i, &msp_cic_irq_controller, handle_level_irq); +#ifdef CONFIG_MIPS_MT_SMTC + /* Mask of CIC interrupt */ + irq_hwmask[i] = C_IRQ4; +#endif + } + + /* Initialize the PER interrupt sub-system */ + msp_per_irq_init(); } +/* CIC masked by CIC vector processing before dispatch called */ void msp_cic_irq_dispatch(void) { - u32 pending; - int intbase; - - intbase = MSP_CIC_INTBASE; - pending = *CIC_STS_REG & *CIC_VPE0_MSK_REG; - - /* check for PER interrupt */ - if (pending == (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) { - intbase = MSP_PER_INTBASE; - pending = *PER_INT_STS_REG & *PER_INT_MSK_REG; - } - - /* check for spurious interrupt */ - if (pending == 0x00000000) { - printk(KERN_ERR - "Spurious %s interrupt? status %08x, mask %08x\n", - (intbase == MSP_CIC_INTBASE) ? "CIC" : "PER", - (intbase == MSP_CIC_INTBASE) ? - *CIC_STS_REG : *PER_INT_STS_REG, - (intbase == MSP_CIC_INTBASE) ? - *CIC_VPE0_MSK_REG : *PER_INT_MSK_REG); - return; - } - - /* check for the timer and dispatch it first */ - if ((intbase == MSP_CIC_INTBASE) && - (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE)))) + volatile u32 *cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG; + u32 cic_mask; + u32 pending; + int cic_status = *CIC_STS_REG; + cic_mask = cic_msk_reg[get_current_vpe()]; + pending = cic_status & cic_mask; + if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) { do_IRQ(MSP_INT_VPE0_TIMER); - else - do_IRQ(ffs(pending) + intbase - 1); + } else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) { + do_IRQ(MSP_INT_VPE1_TIMER); + } else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) { + msp_per_irq_dispatch(); + } else if (pending) { + do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1); + } else{ + spurious_interrupt(); + } } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c new file mode 100644 index 000000000000..f9b9dcdfa9dd --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c @@ -0,0 +1,135 @@ +/* + * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c + * + * This file define the irq handler for MSP PER subsystem interrupts. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/bitops.h> + +#include <asm/mipsregs.h> +#include <asm/system.h> + +#include <msp_cic_int.h> +#include <msp_regs.h> + + +/* + * Convenience Macro. Should be somewhere generic. + */ +#define get_current_vpe() \ + ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) + +#ifdef CONFIG_SMP +/* + * The PER registers must be protected from concurrent access. + */ + +static DEFINE_SPINLOCK(per_lock); +#endif + +/* ensure writes to per are completed */ + +static inline void per_wmb(void) +{ + const volatile void __iomem *per_mem = PER_INT_MSK_REG; + volatile u32 dummy_read; + + wmb(); + dummy_read = __raw_readl(per_mem); + dummy_read++; +} + +static inline void unmask_per_irq(struct irq_data *d) +{ +#ifdef CONFIG_SMP + unsigned long flags; + spin_lock_irqsave(&per_lock, flags); + *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); + spin_unlock_irqrestore(&per_lock, flags); +#else + *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); +#endif + per_wmb(); +} + +static inline void mask_per_irq(struct irq_data *d) +{ +#ifdef CONFIG_SMP + unsigned long flags; + spin_lock_irqsave(&per_lock, flags); + *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); + spin_unlock_irqrestore(&per_lock, flags); +#else + *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); +#endif + per_wmb(); +} + +static inline void msp_per_irq_ack(struct irq_data *d) +{ + mask_per_irq(d); + /* + * In the PER interrupt controller, only bits 11 and 10 + * are write-to-clear, (SPI TX complete, SPI RX complete). + * It does nothing for any others. + */ + *PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE)); +} + +#ifdef CONFIG_SMP +static int msp_per_irq_set_affinity(struct irq_data *d, + const struct cpumask *affinity, bool force) +{ + /* WTF is this doing ????? */ + unmask_per_irq(d); + return 0; +} +#endif + +static struct irq_chip msp_per_irq_controller = { + .name = "MSP_PER", + .irq_enable = unmask_per_irq. + .irq_disable = mask_per_irq, + .irq_ack = msp_per_irq_ack, +#ifdef CONFIG_SMP + .irq_set_affinity = msp_per_irq_set_affinity, +#endif +}; + +void __init msp_per_irq_init(void) +{ + int i; + /* Mask/clear interrupts. */ + *PER_INT_MSK_REG = 0x00000000; + *PER_INT_STS_REG = 0xFFFFFFFF; + /* initialize all the IRQ descriptors */ + for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) { + irq_set_chip(i, &msp_per_irq_controller); +#ifdef CONFIG_MIPS_MT_SMTC + irq_hwmask[i] = C_IRQ4; +#endif + } +} + +void msp_per_irq_dispatch(void) +{ + u32 per_mask = *PER_INT_MSK_REG; + u32 per_status = *PER_INT_STS_REG; + u32 pending; + + pending = per_status & per_mask; + if (pending) { + do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1); + } else { + spurious_interrupt(); + } +} diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c index 61f390232346..8f51e4adc438 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c @@ -21,8 +21,10 @@ #include <msp_slp_int.h> #include <msp_regs.h> -static inline void unmask_msp_slp_irq(unsigned int irq) +static inline void unmask_msp_slp_irq(struct irq_data *d) { + unsigned int irq = d->irq; + /* check for PER interrupt range */ if (irq < MSP_PER_INTBASE) *SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE)); @@ -30,8 +32,10 @@ static inline void unmask_msp_slp_irq(unsigned int irq) *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE)); } -static inline void mask_msp_slp_irq(unsigned int irq) +static inline void mask_msp_slp_irq(struct irq_data *d) { + unsigned int irq = d->irq; + /* check for PER interrupt range */ if (irq < MSP_PER_INTBASE) *SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE)); @@ -43,8 +47,10 @@ static inline void mask_msp_slp_irq(unsigned int irq) * While we ack the interrupt interrupts are disabled and thus we don't need * to deal with concurrency issues. Same for msp_slp_irq_end. */ -static inline void ack_msp_slp_irq(unsigned int irq) +static inline void ack_msp_slp_irq(struct irq_data *d) { + unsigned int irq = d->irq; + /* check for PER interrupt range */ if (irq < MSP_PER_INTBASE) *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE)); @@ -54,9 +60,9 @@ static inline void ack_msp_slp_irq(unsigned int irq) static struct irq_chip msp_slp_irq_controller = { .name = "MSP_SLP", - .ack = ack_msp_slp_irq, - .mask = mask_msp_slp_irq, - .unmask = unmask_msp_slp_irq, + .irq_ack = ack_msp_slp_irq, + .irq_mask = mask_msp_slp_irq, + .irq_unmask = unmask_msp_slp_irq, }; void __init msp_slp_irq_init(void) diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c index a54e85b3cf29..fb37a10e0309 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -146,6 +146,8 @@ void __init plat_mem_setup(void) pm_power_off = msp_power_off; } +extern struct plat_smp_ops msp_smtc_smp_ops; + void __init prom_init(void) { unsigned long family; @@ -226,6 +228,14 @@ void __init prom_init(void) */ msp_serial_setup(); +#ifdef CONFIG_MIPS_MT_SMP + register_smp_ops(&vsmp_smp_ops); +#endif + +#ifdef CONFIG_MIPS_MT_SMTC + register_smp_ops(&msp_smtc_smp_ops); +#endif + #ifdef CONFIG_PMCTWILED /* * Setup LED states before the subsys_initcall loads other diff --git a/arch/mips/pmc-sierra/msp71xx/msp_smp.c b/arch/mips/pmc-sierra/msp71xx/msp_smp.c new file mode 100644 index 000000000000..43a9e26e1c69 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_smp.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * Copyright (C) 2010 PMC-Sierra, Inc. + * + * VSMP support for MSP platforms . Derived from malta vsmp support. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include <linux/smp.h> +#include <linux/interrupt.h> + +#ifdef CONFIG_MIPS_MT_SMP +#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ +#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for call */ + + +static void ipi_resched_dispatch(void) +{ + do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ); +} + +static void ipi_call_dispatch(void) +{ + do_IRQ(MIPS_CPU_IPI_CALL_IRQ); +} + +static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + +static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) +{ + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = IRQF_DISABLED | IRQF_PERCPU, + .name = "IPI_resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = IRQF_DISABLED | IRQF_PERCPU, + .name = "IPI_call" +}; + +void __init arch_init_ipiirq(int irq, struct irqaction *action) +{ + setup_irq(irq, action); + set_irq_handler(irq, handle_percpu_irq); +} + +void __init msp_vsmp_int_init(void) +{ + set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); + set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); + arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, &irq_resched); + arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, &irq_call); +} +#endif /* CONFIG_MIPS_MT_SMP */ diff --git a/arch/mips/pmc-sierra/msp71xx/msp_smtc.c b/arch/mips/pmc-sierra/msp71xx/msp_smtc.c new file mode 100644 index 000000000000..c8dcc1c01e18 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_smtc.c @@ -0,0 +1,105 @@ +/* + * MSP71xx Platform-specific hooks for SMP operation + */ +#include <linux/irq.h> +#include <linux/init.h> + +#include <asm/mipsmtregs.h> +#include <asm/mipsregs.h> +#include <asm/smtc.h> +#include <asm/smtc_ipi.h> + +/* VPE/SMP Prototype implements platform interfaces directly */ + +/* + * Cause the specified action to be performed on a targeted "CPU" + */ + +static void msp_smtc_send_ipi_single(int cpu, unsigned int action) +{ + /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ + smtc_send_ipi(cpu, LINUX_SMP_IPI, action); +} + +static void msp_smtc_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + msp_smtc_send_ipi_single(i, action); +} + +/* + * Post-config but pre-boot cleanup entry point + */ +static void __cpuinit msp_smtc_init_secondary(void) +{ + int myvpe; + + /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ + myvpe = read_c0_tcbind() & TCBIND_CURVPE; + if (myvpe > 0) + change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 | + STATUSF_IP6 | STATUSF_IP7); + smtc_init_secondary(); +} + +/* + * Platform "CPU" startup hook + */ +static void __cpuinit msp_smtc_boot_secondary(int cpu, + struct task_struct *idle) +{ + smtc_boot_secondary(cpu, idle); +} + +/* + * SMP initialization finalization entry point + */ +static void __cpuinit msp_smtc_smp_finish(void) +{ + smtc_smp_finish(); +} + +/* + * Hook for after all CPUs are online + */ + +static void msp_smtc_cpus_done(void) +{ +} + +/* + * Platform SMP pre-initialization + * + * As noted above, we can assume a single CPU for now + * but it may be multithreaded. + */ + +static void __init msp_smtc_smp_setup(void) +{ + /* + * we won't get the definitive value until + * we've run smtc_prepare_cpus later, but + */ + + if (read_c0_config3() & (1 << 2)) + smp_num_siblings = smtc_build_cpu_map(0); +} + +static void __init msp_smtc_prepare_cpus(unsigned int max_cpus) +{ + smtc_prepare_cpus(max_cpus); +} + +struct plat_smp_ops msp_smtc_smp_ops = { + .send_ipi_single = msp_smtc_send_ipi_single, + .send_ipi_mask = msp_smtc_send_ipi_mask, + .init_secondary = msp_smtc_init_secondary, + .smp_finish = msp_smtc_smp_finish, + .cpus_done = msp_smtc_cpus_done, + .boot_secondary = msp_smtc_boot_secondary, + .smp_setup = msp_smtc_smp_setup, + .prepare_cpus = msp_smtc_prepare_cpus, +}; diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c index 01df84ce31e2..8b42f307a7a7 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_time.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c @@ -29,6 +29,7 @@ #include <linux/module.h> #include <linux/ptrace.h> +#include <asm/cevt-r4k.h> #include <asm/mipsregs.h> #include <asm/time.h> @@ -36,6 +37,12 @@ #include <msp_int.h> #include <msp_regs.h> +#define get_current_vpe() \ + ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) + +static struct irqaction timer_vpe1; +static int tim_installed; + void __init plat_time_init(void) { char *endp, *s; @@ -83,5 +90,12 @@ void __init plat_time_init(void) unsigned int __cpuinit get_c0_compare_int(void) { - return MSP_INT_VPE0_TIMER; + /* MIPS_MT modes may want timer for second VPE */ + if ((get_current_vpe()) && !tim_installed) { + memcpy(&timer_vpe1, &c0_compare_irqaction, sizeof(timer_vpe1)); + setup_irq(MSP_INT_VPE1_TIMER, &timer_vpe1); + tim_installed++; + } + + return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER; } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_usb.c b/arch/mips/pmc-sierra/msp71xx/msp_usb.c index 0ee01e359dd8..9a1aef89bd4c 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_usb.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_usb.c @@ -1,7 +1,7 @@ /* * The setup file for USB related hardware on PMC-Sierra MSP processors. * - * Copyright 2006-2007 PMC-Sierra, Inc. + * Copyright 2006 PMC-Sierra, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -23,8 +23,8 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) -#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/platform_device.h> @@ -34,40 +34,56 @@ #include <msp_regs.h> #include <msp_int.h> #include <msp_prom.h> +#include <msp_usb.h> + #if defined(CONFIG_USB_EHCI_HCD) -static struct resource msp_usbhost_resources [] = { - [0] = { - .start = MSP_USB_BASE_START, - .end = MSP_USB_BASE_END, - .flags = IORESOURCE_MEM, +static struct resource msp_usbhost0_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB0_HS_START, + .end = MSP_USB0_HS_END, + .flags = IORESOURCE_MEM, }, [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB0_MAB_START, + .end = MSP_USB0_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB0_ID_START, + .end = MSP_USB0_ID_END, + .flags = IORESOURCE_MEM, }, }; -static u64 msp_usbhost_dma_mask = DMA_BIT_MASK(32); +static u64 msp_usbhost0_dma_mask = 0xffffffffUL; -static struct platform_device msp_usbhost_device = { - .name = "pmcmsp-ehci", - .id = 0, +static struct mspusb_device msp_usbhost0_device = { .dev = { - .dma_mask = &msp_usbhost_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), + .name = "pmcmsp-ehci", + .id = 0, + .dev = { + .dma_mask = &msp_usbhost0_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbhost0_resources), + .resource = msp_usbhost0_resources, }, - .num_resources = ARRAY_SIZE(msp_usbhost_resources), - .resource = msp_usbhost_resources, }; -#endif /* CONFIG_USB_EHCI_HCD */ -#if defined(CONFIG_USB_GADGET) -static struct resource msp_usbdev_resources [] = { - [0] = { - .start = MSP_USB_BASE, - .end = MSP_USB_BASE_END, +/* MSP7140/MSP82XX has two USB2 hosts. */ +#ifdef CONFIG_MSP_HAS_DUAL_USB +static u64 msp_usbhost1_dma_mask = 0xffffffffUL; + +static struct resource msp_usbhost1_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB1_HS_START, + .end = MSP_USB1_HS_END, .flags = IORESOURCE_MEM, }, [1] = { @@ -75,76 +91,173 @@ static struct resource msp_usbdev_resources [] = { .end = MSP_INT_USB, .flags = IORESOURCE_IRQ, }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB1_MAB_START, + .end = MSP_USB1_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB1_ID_START, + .end = MSP_USB1_ID_END, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mspusb_device msp_usbhost1_device = { + .dev = { + .name = "pmcmsp-ehci", + .id = 1, + .dev = { + .dma_mask = &msp_usbhost1_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbhost1_resources), + .resource = msp_usbhost1_resources, + }, }; +#endif /* CONFIG_MSP_HAS_DUAL_USB */ +#endif /* CONFIG_USB_EHCI_HCD */ -static u64 msp_usbdev_dma_mask = DMA_BIT_MASK(32); +#if defined(CONFIG_USB_GADGET) +static struct resource msp_usbdev0_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB0_HS_START, + .end = MSP_USB0_HS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB0_MAB_START, + .end = MSP_USB0_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB0_ID_START, + .end = MSP_USB0_ID_END, + .flags = IORESOURCE_MEM, + }, +}; -static struct platform_device msp_usbdev_device = { - .name = "msp71xx_udc", - .id = 0, +static u64 msp_usbdev_dma_mask = 0xffffffffUL; + +/* This may need to be converted to a mspusb_device, too. */ +static struct mspusb_device msp_usbdev0_device = { .dev = { - .dma_mask = &msp_usbdev_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), + .name = "msp71xx_udc", + .id = 0, + .dev = { + .dma_mask = &msp_usbdev_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbdev0_resources), + .resource = msp_usbdev0_resources, }, - .num_resources = ARRAY_SIZE(msp_usbdev_resources), - .resource = msp_usbdev_resources, }; -#endif /* CONFIG_USB_GADGET */ -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) -static struct platform_device *msp_devs[1]; -#endif +#ifdef CONFIG_MSP_HAS_DUAL_USB +static struct resource msp_usbdev1_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB1_HS_START, + .end = MSP_USB1_HS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB1_MAB_START, + .end = MSP_USB1_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB1_ID_START, + .end = MSP_USB1_ID_END, + .flags = IORESOURCE_MEM, + }, +}; +/* This may need to be converted to a mspusb_device, too. */ +static struct mspusb_device msp_usbdev1_device = { + .dev = { + .name = "msp71xx_udc", + .id = 0, + .dev = { + .dma_mask = &msp_usbdev_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbdev1_resources), + .resource = msp_usbdev1_resources, + }, +}; + +#endif /* CONFIG_MSP_HAS_DUAL_USB */ +#endif /* CONFIG_USB_GADGET */ static int __init msp_usb_setup(void) { -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) - char *strp; - char envstr[32]; - unsigned int val = 0; - int result = 0; + char *strp; + char envstr[32]; + struct platform_device *msp_devs[NUM_USB_DEVS]; + unsigned int val; + /* construct environment name usbmode */ + /* set usbmode <host/device> as pmon environment var */ /* - * construct environment name usbmode - * set usbmode <host/device> as pmon environment var + * Could this perhaps be integrated into the "features" env var? + * Use the features key "U", and follow with "H" for host-mode, + * "D" for device-mode. If it works for Ethernet, why not USB... + * -- hammtrev, 2007/03/22 */ snprintf((char *)&envstr[0], sizeof(envstr), "usbmode"); -#if defined(CONFIG_USB_EHCI_HCD) - /* default to host mode */ + /* set default host mode */ val = 1; -#endif /* get environment string */ strp = prom_getenv((char *)&envstr[0]); if (strp) { + /* compare string */ if (!strcmp(strp, "device")) val = 0; } if (val) { #if defined(CONFIG_USB_EHCI_HCD) - /* get host mode device */ - msp_devs[0] = &msp_usbhost_device; - ppfinit("platform add USB HOST done %s.\n", - msp_devs[0]->name); - - result = platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); -#endif /* CONFIG_USB_EHCI_HCD */ - } + msp_devs[0] = &msp_usbhost0_device.dev; + ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name); +#ifdef CONFIG_MSP_HAS_DUAL_USB + msp_devs[1] = &msp_usbhost1_device.dev; + ppfinit("platform add USB HOST done %s.\n", msp_devs[1]->name); +#endif +#else + ppfinit("%s: echi_hcd not supported\n", __FILE__); +#endif /* CONFIG_USB_EHCI_HCD */ + } else { #if defined(CONFIG_USB_GADGET) - else { /* get device mode structure */ - msp_devs[0] = &msp_usbdev_device; - ppfinit("platform add USB DEVICE done %s.\n", - msp_devs[0]->name); - - result = platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); + msp_devs[0] = &msp_usbdev0_device.dev; + ppfinit("platform add USB DEVICE done %s.\n" + , msp_devs[0]->name); +#ifdef CONFIG_MSP_HAS_DUAL_USB + msp_devs[1] = &msp_usbdev1_device.dev; + ppfinit("platform add USB DEVICE done %s.\n" + , msp_devs[1]->name); +#endif +#else + ppfinit("%s: usb_gadget not supported\n", __FILE__); +#endif /* CONFIG_USB_GADGET */ } -#endif /* CONFIG_USB_GADGET */ -#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */ + /* add device */ + platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); - return result; + return 0; } subsys_initcall(msp_usb_setup); +#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */ |