wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts

There is quite a lot of overlap in definitions between these headers...

Signed-off-by: John W. Linville <linville@tuxdriver.com>

3 files changed, 6 insertions, 113 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b0726e2079b5..aad99195a4cc 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -826,8 +826,7 @@ struct ieee80211_ht_info {
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_FAST_BSS_TRANSITION 2
-#define WLAN_AUTH_LEAP 128
+#define WLAN_AUTH_LEAP 2
 
 #define WLAN_AUTH_CHALLENGE_LEN 128
 
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index afa34d3be721..738734a4653b 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -28,6 +28,7 @@
 #include <linux/if_ether.h>	/* ETH_ALEN */
 #include <linux/kernel.h>	/* ARRAY_SIZE */
 #include <linux/wireless.h>
+#include <linux/ieee80211.h>
 
 #define IEEE80211_VERSION "git-1.1.13"
 
@@ -214,94 +215,6 @@ struct ieee80211_snap_hdr {
 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
 #define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
 
-/* Authentication algorithms */
-#define WLAN_AUTH_OPEN 0
-#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_LEAP 2
-
-#define WLAN_AUTH_CHALLENGE_LEN 128
-
-#define WLAN_CAPABILITY_ESS (1<<0)
-#define WLAN_CAPABILITY_IBSS (1<<1)
-#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
-#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
-#define WLAN_CAPABILITY_PRIVACY (1<<4)
-#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
-#define WLAN_CAPABILITY_PBCC (1<<6)
-#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
-#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
-#define WLAN_CAPABILITY_QOS (1<<9)
-#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
-#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
-
-/* 802.11g ERP information element */
-#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
-#define WLAN_ERP_USE_PROTECTION (1<<1)
-#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
-
-/* Status codes */
-enum ieee80211_statuscode {
-	WLAN_STATUS_SUCCESS = 0,
-	WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
-	WLAN_STATUS_CAPS_UNSUPPORTED = 10,
-	WLAN_STATUS_REASSOC_NO_ASSOC = 11,
-	WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
-	WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
-	WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
-	WLAN_STATUS_CHALLENGE_FAIL = 15,
-	WLAN_STATUS_AUTH_TIMEOUT = 16,
-	WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
-	WLAN_STATUS_ASSOC_DENIED_RATES = 18,
-	/* 802.11b */
-	WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
-	WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
-	WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
-	/* 802.11h */
-	WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
-	WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
-	WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
-	/* 802.11g */
-	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
-	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
-	/* 802.11i */
-	WLAN_STATUS_INVALID_IE = 40,
-	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
-	WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
-	WLAN_STATUS_INVALID_AKMP = 43,
-	WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
-	WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
-	WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
-};
-
-/* Reason codes */
-enum ieee80211_reasoncode {
-	WLAN_REASON_UNSPECIFIED = 1,
-	WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
-	WLAN_REASON_DEAUTH_LEAVING = 3,
-	WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
-	WLAN_REASON_DISASSOC_AP_BUSY = 5,
-	WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
-	WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
-	WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
-	WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
-	/* 802.11h */
-	WLAN_REASON_DISASSOC_BAD_POWER = 10,
-	WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
-	/* 802.11i */
-	WLAN_REASON_INVALID_IE = 13,
-	WLAN_REASON_MIC_FAILURE = 14,
-	WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
-	WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
-	WLAN_REASON_IE_DIFFERENT = 17,
-	WLAN_REASON_INVALID_GROUP_CIPHER = 18,
-	WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
-	WLAN_REASON_INVALID_AKMP = 20,
-	WLAN_REASON_UNSUPP_RSN_VERSION = 21,
-	WLAN_REASON_INVALID_RSN_IE_CAP = 22,
-	WLAN_REASON_IEEE8021X_FAILED = 23,
-	WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
-};
-
 /* Action categories - 802.11h */
 enum ieee80211_actioncategories {
 	WLAN_ACTION_SPECTRUM_MGMT = 0,
@@ -530,15 +443,6 @@ enum ieee80211_mfie {
 	MFIE_TYPE_QOS_PARAMETER = 222,
 };
 
-/* Minimal header; can be used for passing 802.11 frames with sufficient
- * information to determine what type of underlying data type is actually
- * stored in the data. */
-struct ieee80211_hdr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 payload[0];
-} __attribute__ ((packed));
-
 struct ieee80211_hdr_1addr {
 	__le16 frame_ctl;
 	__le16 duration_id;
@@ -586,18 +490,6 @@ struct ieee80211_hdr_3addrqos {
 	__le16 qos_ctl;
 } __attribute__ ((packed));
 
-struct ieee80211_hdr_4addrqos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-	u8 payload[0];
-	__le16 qos_ctl;
-} __attribute__ ((packed));
-
 struct ieee80211_info_element {
 	u8 id;
 	u8 len;
@@ -1187,7 +1079,7 @@ static inline int ieee80211_get_hdrlen(u16 fc)
 
 static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
 {
-	switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
+	switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control))) {
 	case IEEE80211_1ADDR_LEN:
 		return ((struct ieee80211_hdr_1addr *)hdr)->payload;
 	case IEEE80211_2ADDR_LEN:
diff --git a/include/net/lib80211.h b/include/net/lib80211.h
index 906d96f1b264..e1558a187ac0 100644
--- a/include/net/lib80211.h
+++ b/include/net/lib80211.h
@@ -8,9 +8,11 @@
 #ifndef LIB80211_H
 #define LIB80211_H
 
+#include <linux/ieee80211.h>
+
 /* print_ssid() is intended to be used in debug (and possibly error)
  * messages. It should never be used for passing ssid to user space. */
 const char *print_ssid(char *buf, const char *ssid, u8 ssid_len);
-#define DECLARE_SSID_BUF(var) char var[32 * 4 + 1] __maybe_unused
+#define DECLARE_SSID_BUF(var) char var[IEEE80211_MAX_SSID_LEN * 4 + 1] __maybe_unused
 
 #endif /* LIB80211_H */