summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorWolfram Sang <wsa+renesas@sang-engineering.com>2016-09-19 22:57:48 +0200
committerUlf Hansson <ulf.hansson@linaro.org>2016-09-26 21:31:33 +0200
commit0bc0b6e86524526c92a9409faea79d53db8e7e6e (patch)
treeddc75163ad847e1d4e772fd94b965d17f3099da0 /drivers
parentf7dd5462dac0447851079051e40af35d0af7579e (diff)
mmc: tmio: add eMMC support
We need to add R1 without CRC support, refactor the bus width routine a little and extend a quirk check. To support "non-removable;" we need a workaround which will be hopefully removed when reworking PM soon. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/host/tmio_mmc.h3
-rw-r--r--drivers/mmc/host/tmio_mmc_pio.c38
2 files changed, 29 insertions, 12 deletions
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 1f1cb2628f67..8e126afd988c 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -79,6 +79,9 @@
#define CLK_CTL_DIV_MASK 0xff
#define CLK_CTL_SCLKEN BIT(8)
+#define CARD_OPT_WIDTH8 BIT(13)
+#define CARD_OPT_WIDTH BIT(15)
+
#define TMIO_BBS 512 /* Boot block size */
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 192817850dff..700567603107 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -336,7 +336,9 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
switch (mmc_resp_type(cmd)) {
case MMC_RSP_NONE: c |= RESP_NONE; break;
- case MMC_RSP_R1: c |= RESP_R1; break;
+ case MMC_RSP_R1:
+ case MMC_RSP_R1_NO_CRC:
+ c |= RESP_R1; break;
case MMC_RSP_R1B: c |= RESP_R1B; break;
case MMC_RSP_R2: c |= RESP_R2; break;
case MMC_RSP_R3: c |= RESP_R3; break;
@@ -730,12 +732,13 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n",
data->blksz, data->blocks);
- /* Some hardware cannot perform 2 byte requests in 4 bit mode */
- if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
+ /* Some hardware cannot perform 2 byte requests in 4/8 bit mode */
+ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4 ||
+ host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
- pr_err("%s: %d byte block unsupported in 4 bit mode\n",
+ pr_err("%s: %d byte block unsupported in 4/8 bit mode\n",
mmc_hostname(host->mmc), data->blksz);
return -EINVAL;
}
@@ -857,14 +860,16 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host)
static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
unsigned char bus_width)
{
- switch (bus_width) {
- case MMC_BUS_WIDTH_1:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
- break;
- case MMC_BUS_WIDTH_4:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
- break;
- }
+ u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT)
+ & ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8);
+
+ /* reg now applies to MMC_BUS_WIDTH_4 */
+ if (bus_width == MMC_BUS_WIDTH_1)
+ reg |= CARD_OPT_WIDTH;
+ else if (bus_width == MMC_BUS_WIDTH_8)
+ reg |= CARD_OPT_WIDTH8;
+
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg);
}
/* Set MMC clock / power.
@@ -1082,6 +1087,15 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
!mmc_card_is_removable(mmc) ||
mmc->slot.cd_irq >= 0);
+ /*
+ * On Gen2+, eMMC with NONREMOVABLE currently fails because native
+ * hotplug gets disabled. It seems RuntimePM related yet we need further
+ * research. Since we are planning a PM overhaul anyway, let's enforce
+ * for now the device being active by enabling native hotplug always.
+ */
+ if (pdata->flags & TMIO_MMC_MIN_RCAR2)
+ _host->native_hotplug = true;
+
if (tmio_mmc_clk_enable(_host) < 0) {
mmc->f_max = pdata->hclk;
mmc->f_min = mmc->f_max / 512;