diff options
author | Mathias Nyman <mathias.nyman@linux.intel.com> | 2015-02-24 18:27:02 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-02-24 08:34:32 -0800 |
commit | 27082e2654dc148078b0abdfc3c8e5ccbde0ebfa (patch) | |
tree | d458d88a8453e889b21e4036a4c3d4add33529e8 /drivers/usb/host/xhci-ring.c | |
parent | 6596a926b0b6c80b730a1dd2fa91908e0a539c37 (diff) |
xhci: Clear the host side toggle manually when endpoint is 'soft reset'
Main benefit of this is to get xhci connected USB scanners to work.
Some devices use a clear endpoint halt request as a 'soft reset' even if
the endpoint is not halted. This will clear the toggle and sequence on the
device side. xHCI however refuses to reset a non-halted endpoint, so instead
we need to issue a configure endpoint command on xHCI to clear its host side
toggle and sequence, and get it in sync with the device side.
Tested-by: Mike Mammarella <mikem@crystalorb.net>
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 88da8d629820..b46b5b98a943 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1729,7 +1729,7 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, if (!command) return; - ep->ep_state |= EP_HALTED; + ep->ep_state |= EP_HALTED | EP_RECENTLY_HALTED; ep->stopped_stream = stream_id; xhci_queue_reset_ep(xhci, command, slot_id, ep_index); |