diff options
author | David S. Miller <davem@davemloft.net> | 2016-11-22 11:29:28 -0500 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-11-22 13:27:16 -0500 |
commit | f9aa9dc7d2d00e6eb02168ffc64ef614b89d7998 (patch) | |
tree | 061b767ccf7d6955cc4fb921c230a787d194392e /arch/arm/boot/dts | |
parent | 06b37b650cf826349677564cb0ff1560ed8e51fc (diff) | |
parent | 3b404a519815b9820f73f1ecf404e5546c9270ba (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
All conflicts were simple overlapping changes except perhaps
for the Thunder driver.
That driver has a change_mtu method explicitly for sending
a message to the hardware. If that fails it returns an
error.
Normally a driver doesn't need an ndo_change_mtu method becuase those
are usually just range changes, which are now handled generically.
But since this extra operation is needed in the Thunder driver, it has
to stay.
However, if the message send fails we have to restore the original
MTU before the change because the entire call chain expects that if
an error is thrown by ndo_change_mtu then the MTU did not change.
Therefore code is added to nicvf_change_mtu to remember the original
MTU, and to restore it upon nicvf_update_hw_max_frs() failue.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r-- | arch/arm/boot/dts/imx53-qsb.dts | 14 | ||||
-rw-r--r-- | arch/arm/boot/dts/logicpd-som-lv.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap5-board-common.dtsi | 7 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih410-b2260.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 |
6 files changed, 23 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index dec4b073ceb1..379939699164 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -64,8 +64,8 @@ }; ldo3_reg: ldo3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -76,8 +76,8 @@ }; ldo5_reg: ldo5 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; @@ -100,14 +100,14 @@ }; ldo9_reg: ldo9 { - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3600000>; regulator-always-on; }; ldo10_reg: ldo10 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3650000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 0ff1c2de95bf..26cce4d18405 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -13,6 +13,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + wl12xx_vmmc: wl12xx_vmmc { compatible = "regulator-fixed"; regulator-name = "vwl1271"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 731ec37aed5b..8f9a69ca818c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,9 +13,9 @@ }; }; - memory@0 { + memory@80000000 { device_type = "memory"; - reg = <0 0>; + reg = <0x80000000 0>; }; leds { diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 6365635fea5c..4caadb253249 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -124,6 +124,7 @@ compatible = "ti,abe-twl6040"; ti,model = "omap5-uevm"; + ti,jack-detection; ti,mclk-freq = <19200000>; ti,mcpdm = <&mcpdm>; @@ -415,7 +416,7 @@ ti,backup-battery-charge-high-current; }; - gpadc { + gpadc: gpadc { compatible = "ti,palmas-gpadc"; interrupts = <18 0 16 0 @@ -475,8 +476,8 @@ smps6_reg: smps6 { /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index ef2ff2f518f6..7fb507fcba7e 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -74,7 +74,7 @@ /* Low speed expansion connector */ spi0: spi@9844000 { label = "LS-SPI0"; - cs-gpio = <&pio30 3 0>; + cs-gpios = <&pio30 3 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 48fc24f36fcb..300a1bd5a6ec 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -282,11 +282,15 @@ uart1_pins_a: uart1@0 { allwinner,pins = "PG6", "PG7"; allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { allwinner,pins = "PG8", "PG9"; allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { |