ehci-platform: Add support for clks and phy passed through devicetree

Currently ehci-platform is only used in combination with devicetree when used
with some Via socs. By extending it to (optionally) get clks and a phy from
devicetree, and enabling / disabling those on power_on / off, it can be used
more generically. Specifically after this commit it can be used for the
ehci controller on Allwinner sunxi SoCs.

Since ehci-platform is intended to handle any generic enough non pci ehci
device, add a "usb-ehci" compatibility string.

There already is a usb-ehci device-tree bindings document, update this
with clks and phy bindings info.

Although actually quite generic so far the via,vt8500 compatibilty string
had its own bindings document. Somehow we even ended up with 2 of them. Since
these provide no extra information over the generic usb-ehci documentation,
this patch removes them.

The ehci-ppc-of.c driver also claims the usb-ehci compatibility string,
even though it mostly is ibm,usb-ehci-440epx specific. ehci-platform.c is
not needed on ppc platforms, so add a !PPC_OF dependency to it to avoid
2 drivers claiming the same compatibility string getting build on ppc.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 18 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index fa18612f757b..2c1aeebe12b7 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -7,13 +7,14 @@ Required properties:
     (debug-port or other) can be also specified here, but only after
     definition of standard EHCI registers.
   - interrupts : one EHCI interrupt should be described here.
-If device registers are implemented in big endian mode, the device
-node should have "big-endian-regs" property.
-If controller implementation operates with big endian descriptors,
-"big-endian-desc" property should be specified.
-If both big endian registers and descriptors are used by the controller
-implementation, "big-endian" property can be specified instead of having
-both "big-endian-regs" and "big-endian-desc".
+
+Optional properties:
+ - big-endian-regs : boolean, set this for hcds with big-endian registers
+ - big-endian-desc : boolean, set this for hcds with big-endian descriptors
+ - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+ - clocks : a list of phandle + clock specifier pairs
+ - phys : phandle + phy specifier pair
+ - phy-names : "usb"
 
 Example (Sequoia 440EPx):
     ehci@e0000300 {
@@ -23,3 +24,13 @@ Example (Sequoia 440EPx):
 	   reg = <0 e0000300 90 0 e0000390 70>;
 	   big-endian;
    };
+
+Example (Allwinner sun4i A10 SoC):
+   ehci0: usb@01c14000 {
+	   compatible = "allwinner,sun4i-a10-ehci", "usb-ehci";
+	   reg = <0x01c14000 0x100>;
+	   interrupts = <39>;
+	   clocks = <&ahb_gates 1>;
+	   phys = <&usbphy 1>;
+	   phy-names = "usb";
+   };