1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
Broadcom VC4 (VideoCore4) GPU
The VC4 device present on the Raspberry Pi includes a display system
with HDMI output and the HVS (Hardware Video Scaler) for compositing
display planes.
Required properties for VC4:
- compatible: Should be "brcm,bcm2835-vc4"
Required properties for Pixel Valve:
- compatible: Should be one of "brcm,bcm2835-pixelvalve0",
"brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2"
- reg: Physical base address and length of the PV's registers
- interrupts: The interrupt number
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
Required properties for HVS:
- compatible: Should be "brcm,bcm2835-hvs"
- reg: Physical base address and length of the HVS's registers
- interrupts: The interrupt number
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
Required properties for HDMI
- compatible: Should be "brcm,bcm2835-hdmi"
- reg: Physical base address and length of the two register ranges
("HDMI" and "HD", in that order)
- interrupts: The interrupt numbers
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
- ddc: phandle of the I2C controller used for DDC EDID probing
- clocks: a) hdmi: The HDMI state machine clock
b) pixel: The pixel clock.
Optional properties for HDMI:
- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear
as an interrupt/status bit in the HDMI controller
itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt
Required properties for DPI:
- compatible: Should be "brcm,bcm2835-dpi"
- reg: Physical base address and length of the registers
- clocks: a) core: The core clock the unit runs on
b) pixel: The pixel clock that feeds the pixelvalve
- port: Port node with a single endpoint connecting to the panel
device, as defined in [1]
Required properties for VEC:
- compatible: Should be "brcm,bcm2835-vec"
- reg: Physical base address and length of the registers
- clocks: The core clock the unit runs on
- interrupts: The interrupt number
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
Required properties for V3D:
- compatible: Should be "brcm,bcm2835-v3d"
- reg: Physical base address and length of the V3D's registers
- interrupts: The interrupt number
See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
[1] Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
reg = <0x7e807000 0x100>;
interrupts = <2 10>; /* pixelvalve */
};
hvs@7e400000 {
compatible = "brcm,bcm2835-hvs";
reg = <0x7e400000 0x6000>;
interrupts = <2 1>;
};
hdmi: hdmi@7e902000 {
compatible = "brcm,bcm2835-hdmi";
reg = <0x7e902000 0x600>,
<0x7e808000 0x100>;
interrupts = <2 8>, <2 9>;
ddc = <&i2c2>;
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
clocks = <&clocks BCM2835_PLLH_PIX>,
<&clocks BCM2835_CLOCK_HSM>;
clock-names = "pixel", "hdmi";
};
dpi: dpi@7e208000 {
compatible = "brcm,bcm2835-dpi";
reg = <0x7e208000 0x8c>;
clocks = <&clocks BCM2835_CLOCK_VPU>,
<&clocks BCM2835_CLOCK_DPI>;
clock-names = "core", "pixel";
#address-cells = <1>;
#size-cells = <0>;
port {
dpi_out: endpoint@0 {
remote-endpoint = <&panel_in>;
};
};
};
vec: vec@7e806000 {
compatible = "brcm,bcm2835-vec";
reg = <0x7e806000 0x1000>;
clocks = <&clocks BCM2835_CLOCK_VEC>;
interrupts = <2 27>;
};
v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
};
vc4: gpu {
compatible = "brcm,bcm2835-vc4";
};
panel: panel {
compatible = "ontat,yx700wv03", "simple-panel";
port {
panel_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
};
|
