From 308d3165d8b2b98d3dc3d97d6662062735daea67 Mon Sep 17 00:00:00 2001 From: jbrunet Date: Mon, 19 Dec 2016 16:05:38 +0100 Subject: dt: bindings: net: use boolean dt properties for eee broken modes The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli Signed-off-by: Jerome Brunet Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/phy.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 54749b60a466..ff1bc4b1bb3b 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -38,8 +38,14 @@ Optional Properties: - enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to compensate for the board being designed with the lanes swapped. -- eee-broken-modes: Bits to clear in the MDIO_AN_EEE_ADV register to - disable EEE broken modes. +- eee-broken-100tx: +- eee-broken-1000t: +- eee-broken-10gt: +- eee-broken-1000kx: +- eee-broken-10gkx4: +- eee-broken-10gkr: + Mark the corresponding energy efficient ethernet mode as broken and + request the ethernet to stop advertising it. Example: -- cgit v1.2.3