diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
4 files changed, 68 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index aa005c1d10d9..da6614c63796 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -10,6 +10,7 @@ Required properties: "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) + "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) - reg : A list of offsets and lengths of the register sets for the device. diff --git a/Documentation/devicetree/bindings/spi/spi-armada-3700.txt b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt new file mode 100644 index 000000000000..1564aa8c02cd --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt @@ -0,0 +1,25 @@ +* Marvell Armada 3700 SPI Controller + +Required Properties: + +- compatible: should be "marvell,armada-3700-spi" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number. The interrupt specifier format depends on + the interrupt controller and of its driver. +- clocks: Must contain the clock source, usually from the North Bridge clocks. +- num-cs: The number of chip selects that is supported by this SPI Controller +- #address-cells: should be 1. +- #size-cells: should be 0. + +Example: + + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10600 0x5d>; + clocks = <&nb_perih_clk 7>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <4>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt new file mode 100644 index 000000000000..225ace1d0c65 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt @@ -0,0 +1,19 @@ +* Freescale Low Power SPI (LPSPI) for i.MX + +Required properties: +- compatible : + - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc +- reg : address and length of the lpspi master registers +- interrupt-parent : core interrupt controller +- interrupts : lpspi interrupt +- clocks : lpspi clock specifier + +Examples: + +lpspi2: lpspi@40290000 { + compatible = "fsl,imx7ulp-spi"; + reg = <0x40290000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_LPSPI2>; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index 21de73db6a05..2ec99b86b622 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -1,7 +1,7 @@ -Allwinner A31 SPI controller +Allwinner A31/H3 SPI controller Required properties: -- compatible: Should be "allwinner,sun6i-a31-spi". +- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi". - reg: Should contain register location and length. - interrupts: Should contain interrupt. - clocks: phandle to the clocks feeding the SPI controller. Two are @@ -12,6 +12,11 @@ Required properties: - resets: phandle to the reset controller asserting this device in reset +Optional properties: +- dmas: DMA specifiers for rx and tx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "rx" and "tx" if present. + Example: spi1: spi@01c69000 { @@ -22,3 +27,19 @@ spi1: spi@01c69000 { clock-names = "ahb", "mod"; resets = <&ahb1_rst 21>; }; + +spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; +}; |