diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
4 files changed, 38 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt index ab0e0488fe92..5f9fbc68e58a 100644 --- a/Documentation/devicetree/bindings/input/da9062-onkey.txt +++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt @@ -1,32 +1,47 @@ -* Dialog DA9062/63 OnKey Module +* Dialog DA9061/62/63 OnKey Module -This module is part of the DA9062/DA9063. For more details about entire -chips see Documentation/devicetree/bindings/mfd/da9062.txt and -Documentation/devicetree/bindings/mfd/da9063.txt +This module is part of the DA9061/DA9062/DA9063. For more details about entire +DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt +For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt -This module provides KEY_POWER, KEY_SLEEP and events. +This module provides the KEY_POWER event. Required properties: -- compatible: should be one of: - dlg,da9062-onkey - dlg,da9063-onkey +- compatible: should be one of the following valid compatible string lines: + "dlg,da9061-onkey", "dlg,da9062-onkey" + "dlg,da9062-onkey" + "dlg,da9063-onkey" Optional properties: - - dlg,disable-key-power : Disable power-down using a long key-press. If this +- dlg,disable-key-power : Disable power-down using a long key-press. If this entry exists the OnKey driver will remove support for the KEY_POWER key - press. If this entry does not exist then by default the key-press - triggered power down is enabled and the OnKey will support both KEY_POWER - and KEY_SLEEP. + press when triggered using a long press of the OnKey. -Example: - - pmic0: da9062@58 { +Example: DA9063 + pmic0: da9063@58 { onkey { compatible = "dlg,da9063-onkey"; dlg,disable-key-power; }; + }; + +Example: DA9062 + + pmic0: da9062@58 { + onkey { + compatible = "dlg,da9062-onkey"; + dlg,disable-key-power; + }; + }; + +Example: DA9061 using a fall-back compatible for the DA9062 onkey driver + pmic0: da9061@58 { + onkey { + compatible = "dlg,da9061-onkey", "dlg,da9062-onkey"; + dlg,disable-key-power; + }; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index 853dff96dd9f..d4927c202aef 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -17,6 +17,8 @@ Optional properties: This value depends on the touch screen. - pre-charge-time: the touch screen need some time to precharge. This value depends on the touch screen. +- touchscreen-average-samples: Number of data samples which are averaged for + each read. Valid values are 1, 4, 8, 16 and 32. Example: tsc: tsc@02040000 { @@ -32,5 +34,6 @@ Example: xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; + touchscreen-average-samples = <32>; status = "okay"; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index 820fee4b77b6..ce85ee508238 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -18,6 +18,8 @@ Optional properties: - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt - silead,max-fingers : maximum number of fingers the touchscreen can detect +- vddio-supply : regulator phandle for controller VDDIO +- avdd-supply : regulator phandle for controller AVDD Example: diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index bccaa4e73045..537643e86f61 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -14,6 +14,9 @@ Optional properties for Touchscreens: - touchscreen-fuzz-pressure : pressure noise value of the absolute input device (arbitrary range dependent on the controller) + - touchscreen-average-samples : Number of data samples which are averaged + for each read (valid values dependent on the + controller) - touchscreen-inverted-x : X axis is inverted (boolean) - touchscreen-inverted-y : Y axis is inverted (boolean) - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) |