From f8b0d5f8cc10f43642f97db6b37d60d765cff34a Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 21 Feb 2017 11:28:03 +0100 Subject: net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() Currently, mvpp2_rx_pkts_coal_set() does the following to avoid setting a too large value for the RX coalescing by packet number: val = (pkts & MVPP2_OCCUPIED_THRESH_MASK); This means that if you set a value that is slightly higher the the maximum number of packets, you in fact get a very low value. It makes a lot more sense to simply check if the value is too high, and if it's too high, limit it to the maximum possible value. Signed-off-by: Thomas Petazzoni Acked-by: Russell King Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index dfeee9636c7a..679811db51a1 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -4381,11 +4381,12 @@ static void mvpp2_txp_max_tx_size_set(struct mvpp2_port *port) static void mvpp2_rx_pkts_coal_set(struct mvpp2_port *port, struct mvpp2_rx_queue *rxq) { - u32 val; + if (rxq->pkts_coal > MVPP2_OCCUPIED_THRESH_MASK) + rxq->pkts_coal = MVPP2_OCCUPIED_THRESH_MASK; - val = (rxq->pkts_coal & MVPP2_OCCUPIED_THRESH_MASK); mvpp2_write(port->priv, MVPP2_RXQ_NUM_REG, rxq->id); - mvpp2_write(port->priv, MVPP2_RXQ_THRESH_REG, val); + mvpp2_write(port->priv, MVPP2_RXQ_THRESH_REG, + rxq->pkts_coal); } /* Set the time delay in usec before Rx interrupt */ -- cgit v1.2.3