From 7c468447f40645fbf2a033dfdaa92b1957130d50 Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Fri, 10 Mar 2017 12:28:18 -0600 Subject: crypto: ccp - Assign DMA commands to the channel's CCP The CCP driver generally uses a round-robin approach when assigning operations to available CCPs. For the DMA engine, however, the DMA mappings of the SGs are associated with a specific CCP. When an IOMMU is enabled, the IOMMU is programmed based on this specific device. If the DMA operations are not performed by that specific CCP then addressing errors and I/O page faults will occur. Update the CCP driver to allow a specific CCP device to be requested for an operation and use this in the DMA engine support. Cc: # 4.9.x- Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-dev.c | 5 ++++- drivers/crypto/ccp/ccp-dmaengine.c | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/ccp/ccp-dev.c b/drivers/crypto/ccp/ccp-dev.c index 511ab042b5e7..92d1c6959f08 100644 --- a/drivers/crypto/ccp/ccp-dev.c +++ b/drivers/crypto/ccp/ccp-dev.c @@ -283,11 +283,14 @@ EXPORT_SYMBOL_GPL(ccp_version); */ int ccp_enqueue_cmd(struct ccp_cmd *cmd) { - struct ccp_device *ccp = ccp_get_device(); + struct ccp_device *ccp; unsigned long flags; unsigned int i; int ret; + /* Some commands might need to be sent to a specific device */ + ccp = cmd->ccp ? cmd->ccp : ccp_get_device(); + if (!ccp) return -ENODEV; diff --git a/drivers/crypto/ccp/ccp-dmaengine.c b/drivers/crypto/ccp/ccp-dmaengine.c index e5d9278f4019..8d0eeb46d4a2 100644 --- a/drivers/crypto/ccp/ccp-dmaengine.c +++ b/drivers/crypto/ccp/ccp-dmaengine.c @@ -390,6 +390,7 @@ static struct ccp_dma_desc *ccp_create_desc(struct dma_chan *dma_chan, goto err; ccp_cmd = &cmd->ccp_cmd; + ccp_cmd->ccp = chan->ccp; ccp_pt = &ccp_cmd->u.passthru_nomap; ccp_cmd->flags = CCP_CMD_MAY_BACKLOG; ccp_cmd->flags |= CCP_CMD_PASSTHRU_NO_DMA_MAP; -- cgit v1.2.3 From 69db7009318758769d625b023402161c750f7876 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 14 Mar 2017 07:36:01 -0400 Subject: hwrng: amd - Revert managed API changes After commit 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"), the amd-rng driver uses devres with pci_dev->dev to keep track of resources, but does not actually register a PCI driver. This results in the following issues: 1. The message WARNING: CPU: 2 PID: 621 at drivers/base/dd.c:349 driver_probe_device+0x38c is output when the i2c_amd756 driver loads and attempts to register a PCI driver. The PCI & device subsystems assume that no resources have been registered for the device, and the WARN_ON() triggers since amd-rng has already do so. 2. The driver leaks memory because the driver does not attach to a device. The driver only uses the PCI device as a reference. devm_*() functions will release resources on driver detach, which the amd-rng driver will never do. As a result, 3. The driver cannot be reloaded because there is always a use of the ioport and region after the first load of the driver. Revert the changes made by 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"). Cc: Signed-off-by: Prarit Bhargava Fixes: 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"). Cc: Matt Mackall Cc: Corentin LABBE Cc: PrasannaKumar Muralidharan Cc: Wei Yongjun Cc: linux-crypto@vger.kernel.org Cc: linux-geode@lists.infradead.org Signed-off-by: Herbert Xu --- drivers/char/hw_random/amd-rng.c | 42 ++++++++++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c index 4a99ac756f08..9959c762da2f 100644 --- a/drivers/char/hw_random/amd-rng.c +++ b/drivers/char/hw_random/amd-rng.c @@ -55,6 +55,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl); struct amd768_priv { void __iomem *iobase; struct pci_dev *pcidev; + u32 pmbase; }; static int amd_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) @@ -148,33 +149,58 @@ found: if (pmbase == 0) return -EIO; - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; - if (!devm_request_region(&pdev->dev, pmbase + PMBASE_OFFSET, - PMBASE_SIZE, DRV_NAME)) { + if (!request_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE, DRV_NAME)) { dev_err(&pdev->dev, DRV_NAME " region 0x%x already in use!\n", pmbase + 0xF0); - return -EBUSY; + err = -EBUSY; + goto out; } - priv->iobase = devm_ioport_map(&pdev->dev, pmbase + PMBASE_OFFSET, - PMBASE_SIZE); + priv->iobase = ioport_map(pmbase + PMBASE_OFFSET, PMBASE_SIZE); if (!priv->iobase) { pr_err(DRV_NAME "Cannot map ioport\n"); - return -ENOMEM; + err = -EINVAL; + goto err_iomap; } amd_rng.priv = (unsigned long)priv; + priv->pmbase = pmbase; priv->pcidev = pdev; pr_info(DRV_NAME " detected\n"); - return devm_hwrng_register(&pdev->dev, &amd_rng); + err = hwrng_register(&amd_rng); + if (err) { + pr_err(DRV_NAME " registering failed (%d)\n", err); + goto err_hwrng; + } + return 0; + +err_hwrng: + ioport_unmap(priv->iobase); +err_iomap: + release_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE); +out: + kfree(priv); + return err; } static void __exit mod_exit(void) { + struct amd768_priv *priv; + + priv = (struct amd768_priv *)amd_rng.priv; + + hwrng_unregister(&amd_rng); + + ioport_unmap(priv->iobase); + + release_region(priv->pmbase + PMBASE_OFFSET, PMBASE_SIZE); + + kfree(priv); } module_init(mod_init); -- cgit v1.2.3 From 8c75704ebcac2ffa31ee7bcc359baf701b52bf00 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 14 Mar 2017 07:36:02 -0400 Subject: hwrng: geode - Revert managed API changes After commit e9afc746299d ("hwrng: geode - Use linux/io.h instead of asm/io.h") the geode-rng driver uses devres with pci_dev->dev to keep track of resources, but does not actually register a PCI driver. This results in the following issues: 1. The driver leaks memory because the driver does not attach to a device. The driver only uses the PCI device as a reference. devm_*() functions will release resources on driver detach, which the geode-rng driver will never do. As a result, 2. The driver cannot be reloaded because there is always a use of the ioport and region after the first load of the driver. Revert the changes made by e9afc746299d ("hwrng: geode - Use linux/io.h instead of asm/io.h"). Cc: Signed-off-by: Prarit Bhargava Fixes: 6e9b5e76882c ("hwrng: geode - Migrate to managed API") Cc: Matt Mackall Cc: Corentin LABBE Cc: PrasannaKumar Muralidharan Cc: Wei Yongjun Cc: linux-crypto@vger.kernel.org Cc: linux-geode@lists.infradead.org Signed-off-by: Herbert Xu --- drivers/char/hw_random/geode-rng.c | 50 ++++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c index e7a245942029..e1d421a36a13 100644 --- a/drivers/char/hw_random/geode-rng.c +++ b/drivers/char/hw_random/geode-rng.c @@ -31,6 +31,9 @@ #include #include + +#define PFX KBUILD_MODNAME ": " + #define GEODE_RNG_DATA_REG 0x50 #define GEODE_RNG_STATUS_REG 0x54 @@ -82,6 +85,7 @@ static struct hwrng geode_rng = { static int __init mod_init(void) { + int err = -ENODEV; struct pci_dev *pdev = NULL; const struct pci_device_id *ent; void __iomem *mem; @@ -89,27 +93,43 @@ static int __init mod_init(void) for_each_pci_dev(pdev) { ent = pci_match_id(pci_tbl, pdev); - if (ent) { - rng_base = pci_resource_start(pdev, 0); - if (rng_base == 0) - return -ENODEV; - - mem = devm_ioremap(&pdev->dev, rng_base, 0x58); - if (!mem) - return -ENOMEM; - geode_rng.priv = (unsigned long)mem; - - pr_info("AMD Geode RNG detected\n"); - return devm_hwrng_register(&pdev->dev, &geode_rng); - } + if (ent) + goto found; } - /* Device not found. */ - return -ENODEV; + goto out; + +found: + rng_base = pci_resource_start(pdev, 0); + if (rng_base == 0) + goto out; + err = -ENOMEM; + mem = ioremap(rng_base, 0x58); + if (!mem) + goto out; + geode_rng.priv = (unsigned long)mem; + + pr_info("AMD Geode RNG detected\n"); + err = hwrng_register(&geode_rng); + if (err) { + pr_err(PFX "RNG registering failed (%d)\n", + err); + goto err_unmap; + } +out: + return err; + +err_unmap: + iounmap(mem); + goto out; } static void __exit mod_exit(void) { + void __iomem *mem = (void __iomem *)geode_rng.priv; + + hwrng_unregister(&geode_rng); + iounmap(mem); } module_init(mod_init); -- cgit v1.2.3