summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-sony.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-06HID: sony: Fix input device leak when connecting a DS4 twice using USB/BTRoderick Colenbrander1-0/+2
When a user connects a DS4 twice using USB and BT, we reject the second device connection after the setup work. We then perform a cleanup, but during cleanup we are not removing the touchpad device. This leads to leakage of an input device, which we would never remove. It can likely result into a kernel oops as well when the touchpad evdev node is accessed and the underlaying HID device has been removed from the system. [jkosina@suse.cz: added stable annotation] Fixes: ac797b95f532 ("HID: sony: Make the DS4 touchpad a separate device") Cc: stable@vger.kernel.org Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-19HID: sony: Ignore DS4 dongle reports when no device is connectedRoderick Colenbrander1-0/+28
When the DS4 dongle is connected, it always generates HID reports even when no DS4 is paired to it. This patch adds logic to ignore HID reports from the dongle if there is no DS4 currently attached. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-19HID: sony: Use DS4 MAC address as unique identifier on USBRoderick Colenbrander1-0/+6
The DS4 MAC address is reported as a unique identified when using Bluetooth. For USB there is no unique identifier reported yet, so use the MAC address. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-19HID: sony: Fix error handling bug when touchpad registration failsRoderick Colenbrander1-1/+1
The error handling code in sony_input_configured in general uses goto based cleanup. Recently we migrated code from sony_probe to here, but we didn't update the existing touchpad registration code, which was already here to use the goto. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-29HID: sony: Support DS4 dongleRoderick Colenbrander1-0/+2
Add support for USB based DS4 dongle device, which allows connecting a DS4 through Bluetooth, but hides Bluetooth from the host system. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-28HID: sony: Comply to Linux gamepad spec for DS4Roderick Colenbrander1-0/+70
The DS4 side of hid-sony used the hid-core layer to assign buttons and axes based on the HID report descriptors. The default mapping was strange e.g. right stick using ABS_Z/ABS_RZ or the physical 'south button' being reported as BTN_EAST etcetera. This patch makes the DS4 side ofi the hid-sony driver comply to the Linux game controller spec as suggested in a discussion with Dmitry on the linux-input list. Currently the main user of the DS4 is the SDL2 library, which has a mapping table using vendor/device/version as a key. In order to not break SDL2 we discussed adjusting the version number, so it can have both mappings. This was discust on linux-input and we discussed privately with SDL2 developers. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-28HID: sony: Make the DS4 touchpad a separate deviceRoderick Colenbrander1-21/+84
The dualshock 4 supports both analog sticks of which one uses ABS_X/_Y and a touchpad. In a recent discussion with Dmitry about some input-mt changes we proposed for disabling pointer emulation from input_mt_sync_frame, Dmitry mentioned ABS_X/_Y should report the same data as ABS_MT_POSITION_X/_Y. The current driver is mixing axes for different subdevices. It was suggested to make the touchpad its own sub-device. This patch turns the touchpad into its own device. In addition this patch also moves the button underneath the touchpad into the new device. It felt like this button should be part of the device. No known user space application (not even SDL2) seems to be using it. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-28HID: sony: Fix memory issue when connecting device using both Bluetooth and USBRoderick Colenbrander1-0/+13
A previous patch moved most input initialization from sony_probe to sony_input_configured to avoid some race conditions. The driver has some special logic to prevent the device to get registered twice in case the user connects it both over Bluetooth and USB. When this condition happens sony_input_configured returns a failure, but sony_probe continues as hid_hw_start doesn't fail. As was discussed on linux-input, it is acceptable for this function to fail. This patch adds a check for the HID_CLAIMED_INPUT flag within sony_probe to determine whether initialization succeeded correctly. The flag is not set by the HID layer when sony_input_configured fails. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: sony: Update device idsRoderick Colenbrander1-0/+4
Support additional DS4 model. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: sony: Adjust value range for motion sensorsRoderick Colenbrander1-6/+6
The motion sensor values are 16-bit, so make the value range match. It is hard to reach the upper values, but they can be reached. At least the current accelerometer value of 8192 is very easy to pass. It is still not nice that the motion sensors live in no man's land in between ABS_MISC and ABS_MT_SLOT, but that's something for another time, which the proposed ABS_ACCEL_*/ABS_GYRO_* were meant for. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: sony: Handle multiple touch events input recordRoderick Colenbrander1-26/+52
Read the touch history field in the HID descriptor and use this value to determine how many touch events to read from the report. As part of this patch, we did a first attempt of making the offset calculation code less magical. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: sony: Send ds4 output reports on output end-pointRoderick Colenbrander1-9/+11
Add a CRC value to each output report. This removes the need for the 'no output reports on interrupt end-point' quirk. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: sony: Perform CRC check on bluetooth input packetsRoderick Colenbrander1-0/+18
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: sony: Adjust HID report size name definitionsRoderick Colenbrander1-15/+15
Put the report type (feature / output) in the report size definitions. This prevents name collisions later on for other different reports, which use the same report id, but have a different size. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-10HID: sony: Fix race condition in sony_probeRoderick Colenbrander1-59/+58
Early on the sony_probe function calls hid_hw_start to start the hardware. Afterwards it issues some hardware requests, initializes other functionality like Force Feedback, power classes and others. However by the time hid_hw_start returns, the device nodes have already been created, which leads to a race condition by user space applications which may detect the device prior to completion of initialization. We have observed this problem many times, this patch fixes the problem. This patch moves most of sony_probe to sony_input_configured, which is called prior to device registration. This fixes the race condition and the same approach is used in other HID drivers. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-07Merge branches 'for-4.8/upstream-fixes', 'for-4.9/alps', ↵Jiri Kosina1-13/+69
'for-4.9/hid-input', 'for-4.9/intel-ish', 'for-4.9/kye-uclogic-waltop-fixes', 'for-4.9/logitech', 'for-4.9/sony', 'for-4.9/upstream' and 'for-4.9/wacom' into for-linus
2016-09-26HID: sony: Update copyright and add Dualshock 4 rate control noteFrank Praznik1-1/+12
Update the copyright notice with the current year and add a note about values for controlling the Dualshock 4 reporting rate. Processing reports at the default full rate of 1000hz can be too demanding for some low-power embedded processors so noting alternate values for people working with this hardware can be useful. Thanks to Rostislav Pehlivanov for finding these values. Signed-off-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-09-26HID: sony: Defer the initial USB Sixaxis output reportFrank Praznik1-4/+25
When initially connected via USB the Sixaxis isn't fully initialized until the PS logo button is pressed and won't send any input reports nor will any state set by output reports be retained. This adds a 'defer_initialization' flag to the sony_sc struct which, when set, will delay sending any output reports until the first input report has arrived. This flag is used with the USB Sixaxis to ensure that any state sent will persist since, until the PS button is pushed, any changes sent to the controller via an output report will be lost after a couple of seconds. The initial state of the controller is still configured at the time of the initial connection and won't be internally modified after that, so any state set by the user between that time and the recepit of the first input report won't be lost. Signed-off-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-09-26HID: sony: Relax duplicate checking for USB-only devicesFrank Praznik1-8/+32
Some USB-only devices which masquerade as Sixaxis controllers report the same generic Bluetooth address for all hardware when queried via the HID report. This causes these devices to be wrongly rejected as duplicates when more than one is connected at once. This introduces a connection type comparison when checking for duplicates and only rejects the newly connected device if the existing matching device is connected using a different connection protocol. The results of the connection type comparison are also used when registering power supply info as the device Bluetooth address is used as the unique identifier string. In cases where more than one valid device has the same Bluetooth address the device ID is now appended to the power supply name string to avoid name collisions when registering the power supply information. Signed-off-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-02HID: sony: disable descriptor fixup for FutureMax Dance MatMikko Perttunen1-1/+5
The FutureMax Dance Mat claims to be a SixAxis controller but breaks if descriptor fixups are applied. Detect the device using its USB product string and disable fixups when it is detected. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-17Merge branches 'for-4.5/upstream-fixes', 'for-4.6/cmedia', ↵Jiri Kosina1-82/+100
'for-4.6/i2c-hid', 'for-4.6/logitech', 'for-4.6/multitouch', 'for-4.6/penmount', 'for-4.6/sony', 'for-4.6/thingm', 'for-4.6/upstream' and 'for-4.6/wacom' into for-linus
2016-02-10HID: sony: underscores are unnecessary for u8, u16, s32Pavel Machek1-57/+57
Double-underscore prefixed types are unnecessary in pure kernel code, replace them with the non prefixed equivalents. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-10HID: sony: fix some warnings from scripts/checkpatch.plAntonio Ospite1-8/+17
WARNING: Block comments use a trailing */ on a separate line #822: FILE: drivers/hid/hid-sony.c:822: + * number but it's not needed for correct operation */ WARNING: Block comments use a trailing */ on a separate line #828: FILE: drivers/hid/hid-sony.c:828: + * buttons multiple keypresses are allowed */ WARNING: Block comments use a trailing */ on a separate line #854: FILE: drivers/hid/hid-sony.c:854: + * 0xff and 11th is for press indication */ WARNING: Missing a blank line after declarations #1930: FILE: drivers/hid/hid-sony.c:1930: + struct sony_sc *sc = container_of(work, struct sony_sc, state_worker); + sc->send_output_report(sc); WARNING: Block comments use a trailing */ on a separate line #2510: FILE: drivers/hid/hid-sony.c:2510: + * Logitech joystick from the device descriptor. */ Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-10HID: sony: fix errors from scripts/checkpatch.plAntonio Ospite1-13/+13
./scripts/checkpatch.pl \ --types "SPACING,TRAILING_WHITESPACE,POINTER_LOCATION,CODE_INDENT" \ -f drivers/hid/hid-sony.c ERROR: trailing whitespace #933: FILE: drivers/hid/hid-sony.c:933: +^I * $ ERROR: space prohibited after that open square bracket '[' #947: FILE: drivers/hid/hid-sony.c:947: + [ 1] = BTN_TRIGGER_HAPPY1, ERROR: space prohibited after that open square bracket '[' #948: FILE: drivers/hid/hid-sony.c:948: + [ 2] = BTN_TRIGGER_HAPPY2, ERROR: space prohibited after that open square bracket '[' #949: FILE: drivers/hid/hid-sony.c:949: + [ 3] = BTN_TRIGGER_HAPPY3, ERROR: space prohibited after that open square bracket '[' #950: FILE: drivers/hid/hid-sony.c:950: + [ 4] = BTN_TRIGGER_HAPPY4, ERROR: space prohibited after that open square bracket '[' #951: FILE: drivers/hid/hid-sony.c:951: + [ 5] = BTN_TRIGGER_HAPPY5, ERROR: space prohibited after that open square bracket '[' #952: FILE: drivers/hid/hid-sony.c:952: + [ 6] = BTN_TRIGGER_HAPPY6, ERROR: space prohibited after that open square bracket '[' #953: FILE: drivers/hid/hid-sony.c:953: + [ 7] = BTN_TRIGGER_HAPPY7, ERROR: space prohibited after that open square bracket '[' #954: FILE: drivers/hid/hid-sony.c:954: + [ 8] = BTN_TRIGGER_HAPPY8, ERROR: space prohibited after that open square bracket '[' #955: FILE: drivers/hid/hid-sony.c:955: + [ 9] = BTN_TRIGGER_HAPPY9, ERROR: "(foo*)" should be "(foo *)" #1032: FILE: drivers/hid/hid-sony.c:1032: + void(*send_output_report)(struct sony_sc*); WARNING: missing space after return type #1032: FILE: drivers/hid/hid-sony.c:1032: + void(*send_output_report)(struct sony_sc*); ERROR: "(foo*)" should be "(foo *)" #2261: FILE: drivers/hid/hid-sony.c:2261: + void(*send_output_report)(struct sony_sc*)) WARNING: missing space after return type #2261: FILE: drivers/hid/hid-sony.c:2261: + void(*send_output_report)(struct sony_sc*)) ERROR: code indent should use tabs where possible #2449: FILE: drivers/hid/hid-sony.c:2449: + */$ total: 13 errors, 2 warnings, 2570 lines checked Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-29HID: sony: fix a typo in descriptors comments s/Joystik/Joystick/Antonio Ospite1-1/+1
Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-18HID: sony: Fixup output reports for the nyko core controllerScott Moreau1-1/+1
The nyko core controller uses the same output report format as the sixaxis controllers, but it expects the report id at offset 1. This does not interfere with the official controllers as this byte is considered a padding byte by the current code. Signed-off-by: Scott Moreau <oreaus@gmail.com> Acked-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-18HID: sony: Add nyko core controller supportScott Moreau1-0/+7
This adds rumble and LED support for nyko core controllers using the sino lite chip vendor:1345 product:3008, for PS3. Setting operational mode and output reports are the same as sixaxis but the input report has a different format since the PS3 accepts HID usb devices. For it to work, an exception is needed to skip overriding the report descriptor and use the original one. Signed-off-by: Scott Moreau <oreaus@gmail.com> Acked-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-18HID: sony: do not bail out when the sixaxis refuses the output reportBenjamin Tissoires1-2/+4
When setting the operational mode, some third party (Speedlink Strike-FX) gamepads refuse the output report. Failing here means we refuse to initialize the gamepad while this should be harmless. The weird part is that the initial commit that added this: a7de9b8 ("HID: sony: Enable Gasia third-party PS3 controllers") mentions this very same controller as one requiring this output report. Anyway, it's broken for one user at least, so let's change it. We will report an error, but at least the controller should work. And no, these devices present themselves as legacy Sony controllers (VID:PID of 054C:0268, as in the official ones) so there are no ways of discriminating them from the official ones. https://bugzilla.redhat.com/show_bug.cgi?id=1255325 Reported-and-tested-by: Max Fedotov <thesourcehim@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-14Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', ↵Jiri Kosina1-19/+88
'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus
2015-12-28HID: use to_hid_device()Geliang Tang1-3/+3
Use to_hid_device() instead of container_of(). Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-19HID: sony: Remove the size check for the Dualshock 4 HID DescriptorFrank Praznik1-2/+2
Sony has modified the HID descriptor in new revisions of the Dualshock 4 which causes the size check in the descriptor replacement function to fail. Remove it so that new revisions of the controller will work correctly. The module is completely replacing the descriptor instead of patching it, so the size check isn't really necessary anyways. Signed-off-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-19HID: sony: Save and restore the controller state on suspend and resumeFrank Praznik1-1/+64
On hardware which provides standby power for charging devices the state of the LEDs and force-feedback on controllers can persist even when the system is in standby. Additionally, the state of the controllers on resume may be different from the state they were in at the time when they were suspended (ie. LEDs are cleared on resume). This implements the suspend and resume callbacks which saves and clears the state of the LEDs on suspend and restores them on resume. Force-feedback is stopped on suspend but not automatically restored on resume until a new event is received to avoid potentially damaging hardware. USB Sixaxis and navigation controllers must be reinitialized when the hardware is reset on resume or they won't send any input reports. Signed-off-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-19HID: sony: Refactor the output report sending functionsFrank Praznik1-13/+19
Refactor the output report sending functions to allow for the sending of output reports without enqueuing a work item. Output reports for any device can now be sent via the send_output_report function pointer in the sony_sc struct which points to the appropriate output function. The individual state worker functions have been replaced with a universal sony_state_worker function which uses this function pointer. Signed-off-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-05HID: hid-input: allow input_configured callback return errorsDmitry Torokhov1-3/+10
When configuring input device via input_configured callback we may encounter errors (for example input_mt_init_slots() may fail). Instead of continuing with half-initialized input device let's allow driver indicate failures. Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-07-31HID: sony: Fix DS4 controller reporting rate issuesRostislav Pehlivanov1-1/+1
This commit removes the cap on the DualShock 4 controller reporting rate when connected using Bluetooth. The previous value of '0xB0' capped the rate to only 20.83 Hz which many userspace utilities mistook as a sign of a bad signal. Since a 'B' and an '8' can look similar it's possible that someone mistook the one for another. The new value of '0x80' enables the full 1000 Hz peak reporting rate that the controller is capable of. Frank adds: "Back when the original code was written the purpose of that value was unknown and 0xB0 seemed to work so that's what ended up being used. Now that we know what it actually does and that 0x80 is a better choice I support this patch." [jkosina@suse.com: update changelog] Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com> Acked-by: Frank Praznik <frank.praznik@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-24HID: sony: Drop invalid Sixaxis input reportsFrank Praznik1-0/+11
When connected via Bluetooth the sixaxis periodically sends reports with an ID of 1, the second byte 0xff and the rest zeroed. These reports are not related to the controller state and must be dropped to avoid generating false input events. Link: http://www.spinics.net/lists/linux-bluetooth/msg63028.html Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-13HID: sony: Navigator Axis for L1 buttonSimon Wood1-1/+8
Patch HID report descriptor to add joystick axis for the L1 button (previously missing). Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-06-18HID: hid-sony: Fix report descriptor for Navigation ControllerSimon Wood1-1/+90
Patch report descriptor to remove unused and ramdomly changing axis. Original report descriptor (via BT) was as follows: 00000000 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 |..........u.....| 00000010 26 ff 00 81 03 75 01 95 13 15 00 25 01 35 00 45 |&....u.....%.5.E| 00000020 01 05 09 19 01 29 13 81 02 75 01 95 0d 06 00 ff |.....)...u......| 00000030 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 |....&........u..| 00000040 04 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 |.5.F...0.1.2.5..| 00000050 c0 05 01 75 08 95 27 09 01 81 02 75 08 95 30 09 |...u..'....u..0.| 00000060 01 91 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 02 |...u..0.........| 00000070 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 |u..0.........u..| 00000080 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 |0.........u..0..| 00000090 b1 02 c0 c0 00 |.....| 00000095 Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-18HID: hid-sony: Navigation controller only has 1 LED and no rumbleSimon Wood1-8/+33
Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-18HID: hid-sony: Add BT support for Navigation ControllerSimon Wood1-0/+2
Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: PS Move fix report descriptorSimon Wood1-25/+44
Fix the report descriptor so that the buttons and trigger are correctly reported. The format of the input report is described here: https://github.com/nitsch/moveonpc/wiki/Input-report The Accelerometers and Gyros (1st frame only) are also reported as axis, but the Magnetometers are NOT as 'fixing' their byte order would break user-space drivers such as PSMoveAPI. It is hoped to resolve this at a future time. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: PS3 Move enable LEDs and Rumble via BTSimon Wood1-6/+5
The LED and Rumble control only function via BT if the full output report is sent. The large report still functions via USB. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: Add support PS3 Move Battery via BTSimon Wood1-4/+11
Add support for the battery charge level and state to be read via BT. This is not support via USB as there is no know way to get the device sending 'input' reports over USB. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: Add quirk for MOTION_CONTROLLER_BTSimon Wood1-3/+5
Split quirk for PS Move Controller as it has to be treated differently when connected via BT. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: Support PS3 Move Controller when connected via BluetoothSimon Wood1-0/+2
Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-07HID: sony: Correct a typo in a HID descriptor comment and explain the odd ↵Frank Praznik1-1/+8
Sixaxis axis mapping Correct a spelling mistake in the Sixaxis HID descriptor comment. Add an explanation as to why the Sixaxis has so many analog axes and why some of them are seen as multi-touch axes. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-07HID: sony: Simplify LED initialization and eliminate redundant copies when ↵Frank Praznik1-30/+28
updating LED states Directly set the initial LED states in the device state struct instead of copying them from a temporary array. This allows for the removal of a redundant "x = x" copy loop in sony_set_leds() that was taking place any time an LED was updated. It also allows for the simplifying of the parameters in functions dealing with LED initialization and updates since only a pointer to the sony_sc struct is needed now. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-07HID: sony: Add support for the Sony Motion ControllerFrank Praznik1-2/+136
Add a fixed-up HID descriptor for the Sony motion controller and enable controls for the LED light as well as force-feedback. The LED is multi-colored (red, green, blue). The motion controller has a single rumble motor so the higher of the left and right values is used to set the speed. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-07HID: sony: Prevent the freeing of an unitialized ida valueFrank Praznik1-4/+4
sony_allocate_output_report() was being called before sony_set_device_id() which meant that an unallocated ida value was was freed if the output report allocation failed and the probe function jumped to err_stop. Do the device ID allocation before the output report allocation to avoid freeing an unallocated value in case of a failure. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds1-5/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 02:55:27 +0000