summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)AuthorFilesLines
2017-02-22Merge tag 'tty-4.11-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver patchset for 4.11-rc1. Not much here, but a lot of little fixes and individual serial driver updates all over the subsystem. Majority are for the sh-sci driver and platform (the arch-specific changes have acks from the maintainer). The start of the "serial bus" code is here as well, but nothing is converted to use it yet. That work is still ongoing, hopefully will start to show up across different subsystems for 4.12 (bluetooth is one major place that will be used.) All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits) tty: pl011: Work around QDF2400 E44 stuck BUSY bit atmel_serial: Use the fractional divider when possible tty: Remove extra include in HVC console tty framework serial: exar: Enable MSI support serial: exar: Move register defines from uapi header to consumer site serial: pci: Remove unused pci_boards entries serial: exar: Move Commtech adapters to 8250_exar as well serial: exar: Fix feature control register constants serial: exar: Fix initialization of EXAR registers for ports > 0 serial: exar: Fix mapping of port I/O resources serial: sh-sci: fix hardware RX trigger level setting tty/serial: atmel: ensure state is restored after suspending serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt serdev: ttyport: check whether tty_init_dev() fails serial: 8250_pci: make pciserial_detach_ports() static ARM: dts: STiH410-b2260: Enable HW flow-control ARM: dts: STiH407-family: Use new Pinctrl groups ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control ARM: dts: STiH410-b2260: Identify the UART RTS line dt-bindings: serial: Update 'uart-has-rtscts' description ...
2017-02-22Merge tag 'char-misc-4.11-rc1' of ↵Linus Torvalds5-16/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patchset for 4.11-rc1. Lots of different driver subsystems updated here: rework for the hyperv subsystem to handle new platforms better, mei and w1 and extcon driver updates, as well as a number of other "minor" driver updates. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) goldfish: Sanitize the broken interrupt handler x86/platform/goldfish: Prevent unconditional loading vmbus: replace modulus operation with subtraction vmbus: constify parameters where possible vmbus: expose hv_begin/end_read vmbus: remove conditional locking of vmbus_write vmbus: add direct isr callback mode vmbus: change to per channel tasklet vmbus: put related per-cpu variable together vmbus: callback is in softirq not workqueue binder: Add support for file-descriptor arrays binder: Add support for scatter-gather binder: Add extra size to allocator binder: Refactor binder_transact() binder: Support multiple /dev instances binder: Deal with contexts in debugfs binder: Support multiple context managers binder: Split flat_binder_object auxdisplay: ht16k33: remove private workqueue auxdisplay: ht16k33: rework input device initialization ...
2017-02-21Merge branch 'next' of ↵Linus Torvalds24-301/+840
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: "Highlights: - major AppArmor update: policy namespaces & lots of fixes - add /sys/kernel/security/lsm node for easy detection of loaded LSMs - SELinux cgroupfs labeling support - SELinux context mounts on tmpfs, ramfs, devpts within user namespaces - improved TPM 2.0 support" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (117 commits) tpm: declare tpm2_get_pcr_allocation() as static tpm: Fix expected number of response bytes of TPM1.2 PCR Extend tpm xen: drop unneeded chip variable tpm: fix misspelled "facilitate" in module parameter description tpm_tis: fix the error handling of init_tis() KEYS: Use memzero_explicit() for secret data KEYS: Fix an error code in request_master_key() sign-file: fix build error in sign-file.c with libressl selinux: allow changing labels for cgroupfs selinux: fix off-by-one in setprocattr tpm: silence an array overflow warning tpm: fix the type of owned field in cap_t tpm: add securityfs support for TPM 2.0 firmware event log tpm: enhance read_log_of() to support Physical TPM event log tpm: enhance TPM 2.0 PCR extend to support multiple banks tpm: implement TPM 2.0 capability to get active PCR banks tpm: fix RC value check in tpm2_seal_trusted tpm_tis: fix iTPM probe via probe_itpm() function tpm: Begin the process to deprecate user_read_timer tpm: remove tpm_read_index and tpm_write_index from tpm.h ...
2017-02-20tpm: declare tpm2_get_pcr_allocation() as staticJarkko Sakkinen2-50/+45
There's no need to export tpm2_get_pcr_alloation() because it is only a helper function for tpm2_auto_startup(). For the same reason it does not make much sense to maintain documentation for it. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-15tpm: Fix expected number of response bytes of TPM1.2 PCR ExtendStefan Berger1-1/+1
The TPM1.2 PCR Extend operation only returns 20 bytes in the body, which is the size of the PCR state. This fixes a problem where IMA gets errors with every PCR Extend. Fixes: c659af78eb7b ("tpm: Check size of response before accessing data") Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm xen: drop unneeded chip variableJulia Lawall1-2/+0
The call that used chip was dropped in 1f0f30e404b3. Drop the leftover declaration and initialization. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm: fix misspelled "facilitate" in module parameter descriptionDmitry Torokhov1-1/+1
I typoed "facilitate" as "faciltate" a few years back... Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm_tis: fix the error handling of init_tis()Wei Yongjun1-1/+1
Add the missing platform_driver_unregister() and remove the duplicate platform_device_unregister(force_pdev) in the error handling case. Fixes: 00194826e6be ("tpm_tis: Clean up the force=1 module parameter") Cc: stable@vger.kernel.org Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-08Revert "hwrng: core - zeroize buffers with random data"David Daney1-3/+0
This reverts commit 2cc751545854d7bd7eedf4d7e377bb52e176cd07. With this commit in place I get on a Cavium ThunderX (arm64) system: $ if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-bad.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 9.1171e-05 s, 2.8 MB/s $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-bad.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 9.6141e-05 s, 2.7 MB/s $ cat rng-bad.txt 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000050 00 00 00 00 37 20 46 ae d0 fc 1c 55 25 6e b0 b8 000060 7c 7e d7 d4 00 0f 6f b2 91 1e 30 a8 fa 3e 52 0e 000070 06 2d 53 30 be a1 20 0f aa 56 6e 0e 44 6e f4 35 000080 b7 6a fe d2 52 70 7e 58 56 02 41 ea d1 9c 6a 6a 000090 d1 bd d8 4c da 35 45 ef 89 55 fc 59 d5 cd 57 ba 0000a0 4e 3e 02 1c 12 76 43 37 23 e1 9f 7a 9f 9e 99 24 0000b0 47 b2 de e3 79 85 f6 55 7e ad 76 13 4f a0 b5 41 0000c0 c6 92 42 01 d9 12 de 8f b4 7b 6e ae d7 24 fc 65 0000d0 4d af 0a aa 36 d9 17 8d 0e 8b 7a 3b b6 5f 96 47 0000e0 46 f7 d8 ce 0b e8 3e c6 13 a6 2c b6 d6 cc 17 26 0000f0 e3 c3 17 8e 9e 45 56 1e 41 ef 29 1a a8 65 c8 3a 000100 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000050 00 00 00 00 f4 90 65 aa 8b f2 5e 31 01 53 b4 d4 000060 06 c0 23 a2 99 3d 01 e4 b0 c1 b1 55 0f 80 63 cf 000070 33 24 d8 3a 1d 5e cd 2c ba c0 d0 18 6f bc 97 46 000080 1e 19 51 b1 90 15 af 80 5e d1 08 0d eb b0 6c ab 000090 6a b4 fe 62 37 c5 e1 ee 93 c3 58 78 91 2a d5 23 0000a0 63 50 eb 1f 3b 84 35 18 cf b2 a4 b8 46 69 9e cf 0000b0 0c 95 af 03 51 45 a8 42 f1 64 c9 55 fc 69 76 63 0000c0 98 9d 82 fa 76 85 24 da 80 07 29 fe 4e 76 0c 61 0000d0 ff 23 94 4f c8 5c ce 0b 50 e8 31 bc 9d ce f4 ca 0000e0 be ca 28 da e6 fa cc 64 1c ec a8 41 db fe 42 bd 0000f0 a0 e2 4b 32 b4 52 ba 03 70 8e c1 8e d0 50 3a c6 000100 To my untrained mental entropy detector, the first several bytes of each read from /dev/hwrng seem to not be very random (i.e. all zero). When I revert the patch (apply this patch), I get back to what we have in v4.9, which looks like (much more random appearing): $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-good.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 0.000252233 s, 1.0 MB/s $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-good.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 0.000113571 s, 2.3 MB/s $ cat rng-good.txt 000000 75 d1 2d 19 68 1f d2 26 a1 49 22 61 66 e8 09 e5 000010 e0 4e 10 d0 1a 2c 45 5d 59 04 79 8e e2 b7 2c 2e 000020 e8 ad da 34 d5 56 51 3d 58 29 c7 7a 8e ed 22 67 000030 f9 25 b9 fb c6 b7 9c 35 1f 84 21 35 c1 1d 48 34 000040 45 7c f6 f1 57 63 1a 88 38 e8 81 f0 a9 63 ad 0e 000050 be 5d 3e 74 2e 4e cb 36 c2 01 a8 14 e1 38 e1 bb 000060 23 79 09 56 77 19 ff 98 e8 44 f3 27 eb 6e 0a cb 000070 c9 36 e3 2a 96 13 07 a0 90 3f 3b bd 1d 04 1d 67 000080 be 33 14 f8 02 c2 a4 02 ab 8b 5b 74 86 17 f0 5e 000090 a1 d7 aa ef a6 21 7b 93 d1 85 86 eb 4e 8c d0 4c 0000a0 56 ac e4 45 27 44 84 9f 71 db 36 b9 f7 47 d7 b3 0000b0 f2 9c 62 41 a3 46 2b 5b e3 80 63 a4 35 b5 3c f4 0000c0 bc 1e 3a ad e4 59 4a 98 6c e8 8d ff 1b 16 f8 52 0000d0 05 5c 2f 52 2a 0f 45 5b 51 fb 93 97 a4 49 4f 06 0000e0 f3 a0 d1 1e ba 3d ed a7 60 8f bb 84 2c 21 94 2d 0000f0 b3 66 a6 61 1e 58 30 24 85 f8 c8 18 c3 77 00 22 000100 000000 73 ca cc a1 d9 bb 21 8d c3 5c f3 ab 43 6d a7 a4 000010 4a fd c5 f4 9c ba 4a 0f b1 2e 19 15 4e 84 26 e0 000020 67 c9 f2 52 4d 65 1f 81 b7 8b 6d 2b 56 7b 99 75 000030 2e cd d0 db 08 0c 4b df f3 83 c6 83 00 2e 2b b8 000040 0f af 61 1d f2 02 35 74 b5 a4 6f 28 f3 a1 09 12 000050 f2 53 b5 d2 da 45 01 e5 12 d6 46 f8 0b db ed 51 000060 7b f4 0d 54 e0 63 ea 22 e2 1d d0 d6 d0 e7 7e e0 000070 93 91 fb 87 95 43 41 28 de 3d 8b a3 a8 8f c4 9e 000080 30 95 12 7a b2 27 28 ff 37 04 2e 09 7c dd 7c 12 000090 e1 50 60 fb 6d 5f a8 65 14 40 89 e3 4c d2 87 8f 0000a0 34 76 7e 66 7a 8e 6b a3 fc cf 38 52 2e f9 26 f0 0000b0 98 63 15 06 34 99 b2 88 4f aa d8 14 88 71 f1 81 0000c0 be 51 11 2b f4 7e a0 1e 12 b2 44 2e f6 8d 84 ea 0000d0 63 82 2b 66 b3 9a fd 08 73 5a c2 cc ab 5a af b1 0000e0 88 e3 a6 80 4b fc db ed 71 e0 ae c0 0a a4 8c 35 0000f0 eb 89 f9 8a 4b 52 59 6f 09 7c 01 3f 56 e7 c7 bf 000100 Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-06Merge 4.10-rc7 into char-misc-nextGreg Kroah-Hartman1-1/+1
We want the hv and other fixes in here as well to handle merge and testing issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03tpm: silence an array overflow warningDan Carpenter1-2/+2
We should check that we're within bounds first before checking that "chip->active_banks[i] != TPM2_ALG_ERROR" so I've re-ordered the two checks. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: fix the type of owned field in cap_tStefan Berger1-1/+1
In cap_t the size of the type bool is assumed to be one byte. This commit sorts out the issue by changing the type to u8. Fixes: c659af78eb7b ("tpm: Check size of response before accessing data") Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: add securityfs support for TPM 2.0 firmware event logNayna Jain6-22/+279
Unlike the device driver support for TPM 1.2, the TPM 2.0 does not support the securityfs pseudo files for displaying the firmware event log. This patch enables support for providing the TPM 2.0 event log in binary form. TPM 2.0 event log supports a crypto agile format that records multiple digests, which is different from TPM 1.2. This patch enables the tpm_bios_log_setup for TPM 2.0 and adds the event log parser which understand the TPM 2.0 crypto agile format. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: enhance read_log_of() to support Physical TPM event logNayna Jain1-4/+23
Physical TPMs use Open Firmware Device Tree bindings that are similar to the IBM Power virtual TPM to support event log. However, these properties store the values in different endianness for Physical and Virtual TPM. This patch fixes the endianness issue by doing appropriate conversion based on Physical or Virtual TPM. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: enhance TPM 2.0 PCR extend to support multiple banksNayna Jain4-44/+71
The current TPM 2.0 device driver extends only the SHA1 PCR bank but the TCG Specification[1] recommends extending all active PCR banks, to prevent malicious users from setting unused PCR banks with fake measurements and quoting them. The existing in-kernel interface(tpm_pcr_extend()) expects only a SHA1 digest. To extend all active PCR banks with differing digest sizes, the SHA1 digest is padded with trailing 0's as needed. This patch reuses the defined digest sizes from the crypto subsystem, adding a dependency on CRYPTO_HASH_INFO module. [1] TPM 2.0 Specification referred here is "TCG PC Client Specific Platform Firmware Profile for TPM 2.0" Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: implement TPM 2.0 capability to get active PCR banksNayna Jain2-0/+82
This patch implements the TPM 2.0 capability TPM_CAP_PCRS to retrieve the active PCR banks from the TPM. This is needed to enable extending all active banks as recommended by TPM 2.0 TCG Specification. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: fix RC value check in tpm2_seal_trustedJarkko Sakkinen2-1/+6
The error code handling is broken as any error code that has the same bits set as TPM_RC_HASH passes. Implemented tpm2_rc_value() helper to parse the error value from FMT0 and FMT1 error codes so that these types of mistakes are prevented in the future. Fixes: 5ca4c20cfd37 ("keys, trusted: select hash algorithm for TPM2 chips") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2017-02-03tpm_tis: fix iTPM probe via probe_itpm() functionMaciej S. Szmigiero1-12/+13
probe_itpm() function is supposed to send command without an itpm flag set and if this fails to repeat it, this time with the itpm flag set. However, commit 41a5e1cf1fe15 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy") moved the itpm flag from an "itpm" variable to a TPM_TIS_ITPM_POSSIBLE chip flag, so setting the (now function-local) itpm variable no longer had any effect. Finally, this function-local itpm variable was removed by commit 56af322156dbe9 ("tpm/tpm_tis: remove unused itpm variable") Tested only on non-iTPM TIS TPM. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: Begin the process to deprecate user_read_timerJason Gunthorpe1-1/+4
For a long time the cdev read/write interface had this strange idea that userspace had to read the result within 60 seconds otherwise it is discarded. Perhaps this made sense under some older locking regime, but in the modern kernel it is not required and is just dangerous. Since something may be relying on this, double the timeout and print a warning. We can remove the code in a few years, but this should be enough to prevent new users. Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: remove tpm_read_index and tpm_write_index from tpm.hJarkko Sakkinen3-11/+18
These are non-generic functions and do not belong to tpm.h. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2017-02-03serdev: Introduce new bus for serial attached devicesRob Herring1-0/+1
The serdev bus is designed for devices such as Bluetooth, WiFi, GPS and NFC connected to UARTs on host processors. Tradionally these have been handled with tty line disciplines, rfkill, and userspace glue such as hciattach. This approach has many drawbacks since it doesn't fit into the Linux driver model. Handling of sideband signals, power control and firmware loading are the main issues. This creates a serdev bus with controllers (i.e. host serial ports) and attached devices. Typically, these are point to point connections, but some devices have muxing protocols or a h/w mux is conceivable. Any muxing is not yet supported with the serdev bus. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-By: Sebastian Reichel <sre@kernel.org> Tested-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25char: xilinx_hwicap: Remove pointless local variablesMichal Simek1-4/+0
Remove unused variables which generates these warnings: [linux-4.10-rc5/drivers/char/xilinx_hwicap/buffer_icap.c:301]: (style) Variable 'num_writes' is modified but its new value is never used. [linux-4.10-rc5/drivers/char/xilinx_hwicap/buffer_icap.c:356]: (style) Variable 'read_count' is modified but its new value is never used. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-23tpm: Check size of response before accessing dataStefan Berger5-51/+123
Make sure that we have not received less bytes than what is indicated in the header of the TPM response. Also, check the number of bytes in the response before accessing its data. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2017-01-23tpm_tis: use default timeout value if chip reports it as zeroMaciej S. Szmigiero4-26/+37
Since commit 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Atmel 3203 TPM on ThinkPad X61S (TPM firmware version 13.9) no longer works. The initialization proceeds fine until we get and start using chip-reported timeouts - and the chip reports C and D timeouts of zero. It turns out that until commit 8e54caf407b98e ("tpm: Provide a generic means to override the chip returned timeouts") we had actually let default timeout values remain in this case, so let's bring back this behavior to make chips like Atmel 3203 work again. Use a common code that was introduced by that commit so a warning is printed in this case and /sys/class/tpm/tpm*/timeouts correctly says the timeouts aren't chip-original. Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm: Do not print an error message when doing TPM auto startupJason Gunthorpe1-3/+6
This is a regression when this code was reworked and made the error print unconditional. The original code deliberately suppressed printing of the first error message so it could quietly sense TPM_ERR_INVALID_POSTINIT. Fixes: a502feb67b47 ("tpm: Clean up reading of timeout and duration capabilities") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm, tpm_crb: Handle 64-bit resource in crb_check_resource()Jiandi An1-3/+5
crb_check_resource() in TPM CRB driver calls acpi_dev_resource_memory() which only handles 32-bit resources. Adding a call to acpi_dev_resource_address_space() in TPM CRB driver which handles 64-bit resources. Signed-off-by: Jiandi An <anjiandi@codeaurora.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/tpm_tis_spi: drop duplicate header module.hGeliang Tang1-1/+0
Drop duplicate header module.h from tpm_tis_spi.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/st33zp24: Remove unneeded linux/miscdevice.h includeCorentin Labbe1-1/+0
tpm/st33zp24/st33zp24.c does not use any miscdevice so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/vtpm: fix kdoc warningsWinkler, Tomas2-63/+91
Use corret kdoc format for function description and eliminate warning of type: tpm_ibmvtpm.c:66: warning: No description found for parameter 'count' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tmp: use pdev for parent device in tpm_chip_allocWinkler, Tomas1-4/+4
The tpm stack uses pdev name convention for the parent device. Fix that also in tpm_chip_alloc(). Fixes: 3897cd9c8d1d ("tpm: Split out the devm stuff from tpmm_chip_alloc")' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/tpm2-chip: fix kdoc errorsWinkler, Tomas1-48/+56
Use correct kdoc format, describe correct parameters and return values. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm: add kdoc for tpm_transmit and tpm_transmit_cmdWinkler, Tomas1-5/+28
Functions tpm_transmit and transmit_cmd are referenced from other functions kdoc hence deserve documentation. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-19virtio_console: fix a crash in config_work_handlerG. Campana1-1/+1
Using control_work instead of config_work as the 3rd argument to container_of results in an invalid portdev pointer. Indeed, the work structure is initialized as below: INIT_WORK(&portdev->config_work, &config_work_handler); It leads to a crash when portdev->vdev is dereferenced later. This bug is triggered when the guest uses a virtio-console without multiport feature and receives a config_changed virtio interrupt. Signed-off-by: G. Campana <gcampana@quarkslab.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-16Merge 4.10-rc4 into char-misc-nextGreg Kroah-Hartman2-11/+12
We want the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11ppdev: don't print a free'd stringColin Ian King1-5/+8
A previous fix of a memory leak now prints the string 'name' that was previously free'd. Fix this by free'ing the string at the end of the function and adding an error exit path for the error conditions. CoverityScan CID#1384523 ("Use after free") Fixes: 2bd362d5f45c1 ("ppdev: fix memory leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11char: lack of bool string made CONFIG_DEVPORT always onMax Bires1-1/+4
Without a bool string present, using "# CONFIG_DEVPORT is not set" in defconfig files would not actually unset devport. This esnured that /dev/port was always on, but there are reasons a user may wish to disable it (smaller kernel, attack surface reduction) if it's not being used. Adding a message here in order to make this user visible. Signed-off-by: Max Bires <jbires@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11drivers: char: mem: Fix thinkos in kmem address checksRobin Murphy1-6/+4
When borrowing the pfn_valid() check from mmap_kmem(), somebody managed to get physical and virtual addresses spectacularly muddled up, such that we've ended up with checks for one being the other. Whilst this does indeed prevent out-of-bounds accesses crashing, on most systems it also prevents the more desirable use-case of working at all ever. Check the *virtual* offset correctly for what it is. Furthermore, do so in the right place - a read or write may span multiple pages, so a single up-front check is insufficient. High memory accesses already have a similar validity check just before the copy_to_user() call, so just make the low memory path fully consistent with that. Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> CC: stable@vger.kernel.org Fixes: 148a1bc84398 ("drivers: char: mem: Check {read,write}_kmem() addresses") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10apm-emulation: move APM_MINOR_DEV to include/linux/miscdevice.hCorentin Labbe1-7/+0
This patch move the define for APM_MINOR_DEV to include/linux/miscdevice.h It is better that all minor number definitions are in the same place. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10ds1302: remove unneeded linux/miscdevice.h includeCorentin Labbe1-1/+0
drivers/char/ds1302.c does not use any miscdevice so the inclusion of linux/miscdevice.h is unnecessary. This patch remove this inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10mmtimer: add member name to the miscdevice declarationCorentin Labbe1-3/+3
Since the struct miscdevice have many members, it is dangerous to init it without members name relying only on member order. This patch add member name to the init declaration. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-2/+2
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds28-28/+28
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-7/+7
Pull virtio updates from Michael Tsirkin: "virtio, vhost: new device, fixes, speedups This includes the new virtio crypto device, and fixes all over the place. In particular enabling endian-ness checks for sparse builds found some bugs which this fixes. And it appears that everyone is in agreement that disabling endian-ness sparse checks shouldn't be necessary any longer. So this enables them for everyone, and drops the __CHECK_ENDIAN__ and __bitwise__ APIs. IRQ handling in virtio has been refactored somewhat, the larger switch to IRQ_SHARED will have to wait as it proved too aggressive" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits) Makefile: drop -D__CHECK_ENDIAN__ from cflags fs/logfs: drop __CHECK_ENDIAN__ Documentation/sparse: drop __CHECK_ENDIAN__ linux: drop __bitwise__ everywhere checkpatch: replace __bitwise__ with __bitwise Documentation/sparse: drop __bitwise__ tools: enable endian checks for all sparse builds linux/types.h: enable endian checks for all sparse builds virtio_mmio: Set dev.release() to avoid warning vhost: remove unused feature bit virtio_ring: fix description of virtqueue_get_buf vhost/scsi: Remove unused but set variable tools/virtio: use {READ,WRITE}_ONCE() in uaccess.h vringh: kill off ACCESS_ONCE() tools/virtio: fix READ_ONCE() crypto: add virtio-crypto driver vhost: cache used event for better performance vsock: lookup and setup guest_cid inside vhost_vsock_lock virtio_pci: split vp_try_to_find_vqs into INTx and MSI-X variants virtio_pci: merge vp_free_vectors into vp_del_vqs ...
2016-12-15virtio_console: drop unused config fieldsMichael S. Tsirkin1-7/+7
struct ports_device includes a config field including the whole virtio_console_config, but only max_nr_ports in there is ever updated or used. The rest is unused and in fact does not even mirror the device config. Drop everything except max_nr_ports, saving some memory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2016-12-14Merge tag 'for-linus-4.10' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds4-105/+133
Pull IPMI updates from Corey Minyard: "Various small fixes for IPMI. Cleanups in the documentation and convertion printk() to pr_xxx() and removal of an unused module parameter. Some small bug fixes and enhancements. This also adds a post softdep from the IPMI core module to the IPMI device interface. Many people have complained that the device interface isn't automatically avaiable when IPMI is loaded. I don't want to make the device interface mandatory, though, plenty of people use IPMI internally (like with ACPI) and don't need a device interface or the added possible security entry. A softdep should make it work 'out of the box' but allow people to not have it if they don't want it" * tag 'for-linus-4.10' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: create hardware-independent softdep for ipmi_devintf ipmi: Fix sequence number handling ipmi: Pick up slave address from SMBIOS on an ACPI device ipmi_si: Clean up printks Move platform device creation earlier in the initialization ipmi: Update documentation ipmi_ssif: Remove an unused module parameter ipmi: Periodically check for events, not messages
2016-12-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-5/+4
Merge more updates from Andrew Morton: - a few misc things - kexec updates - DMA-mapping updates to better support networking DMA operations - IPC updates - various MM changes to improve DAX fault handling - lots of radix-tree changes, mainly to the test suite. All leading up to reimplementing the IDA/IDR code to be a wrapper layer over the radix-tree. However the final trigger-pulling patch is held off for 4.11. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) radix tree test suite: delete unused rcupdate.c radix tree test suite: add new tag check radix-tree: ensure counts are initialised radix tree test suite: cache recently freed objects radix tree test suite: add some more functionality idr: reduce the number of bits per level from 8 to 6 rxrpc: abstract away knowledge of IDR internals tpm: use idr_find(), not idr_find_slowpath() idr: add ida_is_empty radix tree test suite: check multiorder iteration radix-tree: fix replacement for multiorder entries radix-tree: add radix_tree_split_preload() radix-tree: add radix_tree_split radix-tree: add radix_tree_join radix-tree: delete radix_tree_range_tag_if_tagged() radix-tree: delete radix_tree_locate_item() radix-tree: improve multiorder iterators btrfs: fix race in btrfs_free_dummy_fs_info() radix-tree: improve dump output radix-tree: make radix_tree_find_next_bit more useful ...
2016-12-14tpm: use idr_find(), not idr_find_slowpath()Matthew Wilcox1-2/+2
idr_find_slowpath() is not intended to be part of the public API, it's an implementation detail. There's no reason to skip straight to the slowpath here. Link: http://lkml.kernel.org/r/1480369871-5271-64-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14mm: use vmf->address instead of of vmf->virtual_addressJan Kara2-3/+2
Every single user of vmf->virtual_address typed that entry to unsigned long before doing anything with it so the type of virtual_address does not really provide us any additional safety. Just use masked vmf->address which already has the appropriate type. Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge branch 'next' of ↵Linus Torvalds16-375/+519
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Generally pretty quiet for this release. Highlights: Yama: - allow ptrace access for original parent after re-parenting TPM: - add documentation - many bugfixes & cleanups - define a generic open() method for ascii & bios measurements Integrity: - Harden against malformed xattrs SELinux: - bugfixes & cleanups Smack: - Remove unnecessary smack_known_invalid label - Do not apply star label in smack_setprocattr hook - parse mnt opts after privileges check (fixes unpriv DoS vuln)" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (56 commits) Yama: allow access for the current ptrace parent tpm: adjust return value of tpm_read_log tpm: vtpm_proxy: conditionally call tpm_chip_unregister tpm: Fix handling of missing event log tpm: Check the bios_dir entry for NULL before accessing it tpm: return -ENODEV if np is not set tpm: cleanup of printk error messages tpm: replace of_find_node_by_name() with dev of_node property tpm: redefine read_log() to handle ACPI/OF at runtime tpm: fix the missing .owner in tpm_bios_measurements_ops tpm: have event log use the tpm_chip tpm: drop tpm1_chip_register(/unregister) tpm: replace dynamically allocated bios_dir with a static array tpm: replace symbolic permission with octal for securityfs files char: tpm: fix kerneldoc tpm2_unseal_trusted name typo tpm_tis: Allow tpm_tis to be bound using DT tpm, tpm_vtpm_proxy: add kdoc comments for VTPM_PROXY_IOC_NEW_DEV tpm: Only call pm_runtime_get_sync if device has a parent tpm: define a generic open() method for ascii & bios measurements Documentation: tpm: add the Physical TPM device tree binding documentation ...
2016-12-14Merge branch 'linus' of ↵Linus Torvalds8-56/+151
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.10: API: - add skcipher walk interface - add asynchronous compression (acomp) interface - fix algif_aed AIO handling of zero buffer Algorithms: - fix unaligned access in poly1305 - fix DRBG output to large buffers Drivers: - add support for iMX6UL to caam - fix givenc descriptors (used by IPsec) in caam - accelerated SHA256/SHA512 for ARM64 from OpenSSL - add SSE CRCT10DIF and CRC32 to ARM/ARM64 - add AEAD support to Chelsio chcr - add Armada 8K support to omap-rng" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (148 commits) crypto: testmgr - fix overlap in chunked tests again crypto: arm/crc32 - accelerated support based on x86 SSE implementation crypto: arm64/crc32 - accelerated support based on x86 SSE implementation crypto: arm/crct10dif - port x86 SSE implementation to ARM crypto: arm64/crct10dif - port x86 SSE implementation to arm64 crypto: testmgr - add/enhance test cases for CRC-T10DIF crypto: testmgr - avoid overlap in chunked tests crypto: chcr - checking for IS_ERR() instead of NULL crypto: caam - check caam_emi_slow instead of re-lookup platform crypto: algif_aead - fix AIO handling of zero buffer crypto: aes-ce - Make aes_simd_algs static crypto: algif_skcipher - set error code when kcalloc fails crypto: caam - make aamalg_desc a proper module crypto: caam - pass key buffers with typesafe pointers crypto: arm64/aes-ce-ccm - Fix AEAD decryption length MAINTAINERS: add crypto headers to crypto entry crypt: doc - remove misleading mention of async API crypto: doc - fix header file name crypto: api - fix comment typo crypto: skcipher - Add separate walker for AEAD decryption ..
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 19:20:48 +0000