summaryrefslogtreecommitdiff
path: root/arch/arm/mach-exynos/include
AgeCommit message (Collapse)AuthorFilesLines
2016-08-24ARM: EXYNOS: Remove unused DMC and CMU offsets and their mappingsPankaj Dubey1-5/+0
Currently there is no user of DMC and CMU SFR offsets so we can safely remove mapping of their SFR address space and cleanup related offset macros from mach-exynos. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-04-18ARM: EXYNOS: Remove SROM related register settings from mach-exynosPankaj Dubey1-3/+0
As now we have dedicated driver for SROM controller, it will take care of saving register banks during S2R so we can safely remove these settings from mach-exynos. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> [k.kozlowski: Need to select also SAMSUNG_MC] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-25ARM: SAMSUNG: Remove unused register offset definitionPankaj Dubey1-8/+1
This patch cleans up various map.h under mach-exynos, mach-s3c24xx and plat-samsung by removing unused register offset. This patch also does a minor nitpick of changing EXYNOS4 to EXYNOS from comment section of header file "mach-exynos/include/mach/map.h". Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-25ARM: EXYNOS: Code cleanup in map.hPankaj Dubey1-4/+0
Remove unused exynos5440 uart offset macro. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-25ARM: EXYNOS: Remove unused static mapping of CMU for exynos5Pankaj Dubey1-1/+0
Remove unused static mapping of exynos5 CMU and related code. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-01-24ARM: SAMSUNG: remove unused DMA infrastructureArnd Bergmann1-26/+0
Everything uses dmaengine now, so there is no reason to keep this around any longer. Thanks to everyone who was involved in moving the users over to use the dmaengine APIs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09ARM: EXYNOS: Remove i2c sys configuration related codePankaj Dubey1-3/+0
As all these code has been moved into i2c driver, now we can safely remove them from machine files. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2014-11-13ARM: EXYNOS: Remove unused static iomappingPankaj Dubey1-23/+0
This patch removes all unused static iomapping from exynos4/5_iodesc table, and at the same time removes related macros from mach/map.h and plat/map-s5p.h. All such mappings are present in exynos.c but not currently there are no users of these mappings, so it is safe to remove these. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-08-18ARM: EXYNOS: remove unused <mach/memory.h>Uwe Kleine-Koenig1-26/+0
ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so <asm/memory.h> doesn't include <mach/memory.h> and so this file is not used and can go away. Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> [t.figa@samsung.com: boot tested on Exynos4412-based Trats2 board] Tested-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com> [sachin.kamat: Tested on Arndale octa board (Exynos 5420)] Tested-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-23ARM: EXYNOS: Refactored code for using PMU address via DTPankaj Dubey1-3/+0
Under "arm/mach-exynos" many files are using PMU register offsets. Since we have added support for accessing PMU base address via DT, now we can remove PMU mapping from exynosX_iodesc. Let's convert all these access using iomapped address. This will help us in removing static mapping of PMU base address as well as help in reducing dependency over machine header files. Thus helping for migration of PMU implementation from machine to driver folder which can be reused for ARM64 based SoC. Also as we have removed static mappings from "regs-pmu.h" it does not need map.h anymore. But "platsmp.c" needed this and till now it got included indirectly. So lets move header inclusion of "mach/map.h" from "regs-pmu.h" to "platsmp.c". Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-15ARM: EXYNOS: Remove file path from comment sectionPankaj Dubey2-4/+2
Many files under "arm/mach-exynos" are having file path in file comment section which is invalid now. So for better code maintainability let's remove them. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-15ARM: EXYNOS: Map SYSRAM through generic DT bindingsSachin Kamat1-7/+0
Instead of hardcoding the SYSRAM details for each SoC, pass this information through device tree (DT) and make the code SoC agnostic. Generic DT SRAM bindings are used for achieving this. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-04-05Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds2-93/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-03-29Merge tag 'samsung-pm-2' of ↵Arnd Bergmann1-75/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup3 Merge "Samsung PM related 2nd updates for v3.15" from Kukjin Kim: From Tomasz Figa <t.figa@samsung.com>: Current Samsung PM code is heavily unprepared for multiplatform systems. The design implies accessing functions and global variables defined in particular mach- subdirectory from common code in plat-, which is not allowed when building ARCH_MULTIPLATFORM. In addition there is a lot of forced code unification, which makes common function handle any possible quirks of all supported SoCs. In the end this design turned out to not work too well, ending with a lot of empty functions exported from mach-, just because code in common pm.c calls them. Moreover, recent trend of moving lower level suspend/resume code to proper drivers, like pinctrl or clk, made a lot of code there redundant, especially on DT-only platforms like Exynos. Note that this branch is based on previous tags/samsung-pm-1 and merge tags/samsung-cleanup-2 because of fix build error from recent changes of <linux/serial_s3c.h> * tag 'samsung-pm-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ARM: SAMSUNG: Save UART DIVSLOT register based on SoC type ARM: SAMSUNG: Add soc_is_s3c2410() helper ARM: EXYNOS: Do not resume l2x0 if not enabled before suspend Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21ARM: EXYNOS: Remove hardware.h fileSachin Kamat1-18/+0
This is a dummy placeholder file. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-21ARM: EXYNOS: Stop using legacy Samsung PM codeTomasz Figa1-75/+0
Since Exynos SoCs does not follow most of the semantics of older SoCs when configuring the system to enter sleep, there is no reason to rely on the legacy Samsung PM core anymore. This patch adds local Exynos suspend ops and removes all the code left unnecessary. As a side effect, suspend support on Exynos becomes multiplatform-friendly. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-09Merge tag 'samsung-cleanup' of ↵Olof Johansson1-48/+0
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup Samsung cleanup for v3.15 from Kukjin Kim: - Use generic uncompress.h for exynos and remove exynos <mach/uncompress.h> accordingly (other uncompress.h files will be removed) - move <plat/rtc-core.h> into s3c24xx <mach/rtc-core.h> - remove unused header files - cleanup exynos related non-DT stuffs - use inclusion <linux/serial_s3c.h> instead of <plat/regs-serial.h> - remove unneeded Kconfig entries: S3C24XX_GPIO_EXTRA64 and S3C24XX_GPIO_EXTRA128 - remove unneeded function s3c24xx_init_cpu() - remove obsolete s3c24xx <mach/tick.h> * tag 'samsung-cleanup' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Remove uncompress.h ARM: debug: Use generic uncompress.h for exynos ARM: S3C24XX: Move rtc-core.h from plat to mach ARM: EXYNOS: Remove unused header file from pm_domains.c ARM: SAMSUNG: Remove Exynos specific code from devs, s5p-pm-irq and pm-gpio.c ARM: SAMSUNG: Delete unused plat/regs-serial.h header file ARM: SAMSUNG: Replace inclusion of plat/regs-serial.h header file ARM: SAMSUNG: Remove platform dependency from samsung.S ARM: S3C24XX: get rid of unneeded selects ARM: SAMSUNG: remove unneeded s3c24xx_init_cpu() ARM: SAMSUNG: remove obsolete tick.h Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-24ARM: EXYNOS: Remove uncompress.hSachin Kamat1-48/+0
Now that we can use the generic uncompres.h file, there is no need for the machine specific header. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-18Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson1-29/+0
next/cleanup This cleanup series gets rid of <mach/timex.h> for platforms not using ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since 387798b (ARM: initial multiplatform support).) To make this work some code out of arch/arm needed to be adapted. The respective changes got acks by their maintainers to be taken via armsoc (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer). Compared to the previous pull request there was another patch added that fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not squash this fix into the original commit to save him from the need to reverify the series. * tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux: ARM: ixp4xx: fix timer latch calculation ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too ARM: rpc: stop using <mach/timex.h> ARM: ixp4xx: stop using <mach/timex.h> input: ixp4xx-beeper: don't use symbols from <mach/timex.h> ARM: at91: don't use <mach/timex.h> ARM: ep93xx: stop using mach/timex.h ARM: mmp: stop using mach/timex.h ARM: netx: stop using mach/timex.h ARM: sa1100: stop using mach/timex.h clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE rtc: pxa: drop unused #define TIMER_FREQ rtc: at91sam9: include <mach/hardware.h> explicitly ARM/serial: at91: switch atmel serial to use gpiolib Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, tooUwe Kleine-König1-29/+0
While <mach/timex.h> isn't used for multi-platform builds since long it still is for "normal" builds. As the previous patches fix all sites to not make use of this per-platform file, it can go now for good also for platforms that are not (yet) converted to multi-platform. While at it there are no users of CLOCK_TICK_RATE any more, so also drop the dummy #define. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-19ARM: EXYNOS: remove <mach/regs-clock.h> for exynosKukjin Kim1-19/+0
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19ARM: EXYNOS: local definitions for cpuidle.c into mach-exynos dirKukjin Kim1-21/+0
This moves definitions for cpuidle into mach-exynos/cpuidle.c, because we don't need to keep them in the <mach/regs-clock.h>. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19cpufreq: exynos: move definitions for exynos-cpufreq into drivers/cpufreq/Kukjin Kim1-21/+0
This moves regarding exynos-cpufreq definitions into drivers/cpufreq/ exynos-cpufreq.h because they are used only for the cpufreq driver. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19ARM: EXYNOS: local definitions for pm.c into mach-exynos dirKukjin Kim1-26/+0
Some of definitions in the regs-clock.h are used only for pm.c, so this moves them into the file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19PM / devfreq: move definitions for exynos4_bus into drivers/devfreqKukjin Kim1-94/+0
We don't need to keep the definitions for exynos4_bus into mach-exynos/ so this moves them into drviers/devfreq with adding header file. Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19ARM: EXYNOS: cleanup <mach/regs-clock.h>Kukjin Kim1-189/+0
Remove useless definitions in the regs-clock.h file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19ARM: EXYNOS: cleanup <mach/regs-irq.h>Kukjin Kim1-19/+0
Remove useless inclusion <mach/regs-irq.h> for exynos. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19ARM: EXYNOS: remove inclusion <mach/regs-pmu.h> into another headersKukjin Kim3-320/+4
This is needed to remove dependency of headers. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-19ARM: EXYNOS: cleanup <mach/regs-pmu.h>Kukjin Kim1-51/+0
Remove useless definitions in the regs-pmu.h file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-16ARM: Samsung: Remove the MIPI PHY setup codeSylwester Nawrocki1-5/+0
Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM DPHYs so we can remove now unused code at arch/arm/plat-samsung. In case there is any board file for S5PV210 platforms using MIPI CSIS/DSIM (not any upstream currently) it should use the generic PHY API to bind the PHYs to respective PHY consumer drivers and a platform device for the PHY provider should be defined. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16ARM: EXYNOS: change the PHYSMEM_BITS and SECTION_SIZESubash Patel1-0/+5
On EXYNOS5440 there is DRAM on the 36-bit address range. Hence this patch converts the MAX_PHYSMEM_BITS macro to 36 if LPAE is enabled for the ARM architecture. The conventional section size on EXYNOS is 256M due to sparsemem. Since EXYNOS5440 has memory in multiples of 1G in 32-bit and 36-bit range, this has now been modified to 31. Signed-off-by: Subash Patel <subash.rp@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-07-02Merge tag 'late-for-linus' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ...
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds6-1099/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-06-19ARM: EXYNOS: use four additional chipid bits to identify EXYNOS familyChander Kashyap1-4/+3
Use chipid[27:20] bits to identify the EXYNOS family while setting up the serial port during the uncompression setup. This uses four additional bits of chipid to identify the EXYNOS family since this is required for identifying EXYNOS5420 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: SAMSUNG: Consolidate uncompress subroutineTushar Behera1-3/+0
For mach-exynos, uart_base is a pointer and the value is calculated in the machine folder. For other machines, uart_base is defined as a macro in platform directory. For symmetry, the uart_base macro definition is removed and the uart_base calculation is moved to specific machine folders. This would help us consolidating uncompress subroutine for s5p64x0. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove remaining dead code after non-DT support removalArnd Bergmann1-6/+1
This patch removes remaining small bits of unused code that was left after removing non-DT support. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/regs-usb-phy.h headerTomasz Figa1-74/+0
This patch removes mach/regs-usb-phy.h header, which is not used anywhere in the kernel. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove unused base addresses from mach/map.h headerTomasz Figa1-214/+0
This patch removes all the unused base addresses from mach/map.h header, leaving only addresses of IPs that currently use static IO mapping or need the address hardcoded, like low level debug UART. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/irqs.h headerTomasz Figa1-476/+0
Since Exynos now uses CONFIG_SPARSE_IRQ and all remaining users of this header has been fixed, we can safely remove it. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Select SPARSE_IRQ for ExynosTomasz Figa1-0/+1
This patch adds selection of CONFIG_SPARSE_IRQ for ARCH_EXYNOS, since it is required by multiplatform and allows to remove the legacy mach/irqs.h header. To make this possible, a dummy IRQ_EINT_BIT macro is added to pm-core.h header to allow plat-samsung/pm.c compile. This macro is irrelevant for Exynos and will be removed after reworking Samsung pm code for multiplatform compatibility. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/regs-gpio.h headerTomasz Figa1-40/+0
Contents of this header are not used any more and can be safely removed. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Remove mach/gpio.hTomasz Figa1-289/+0
This patch removes mach/gpio.h header that is not required any more on Exynos. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h headerTomasz Figa1-0/+4
This patch adds several compatibility definitions that are not relevant for Exynos, but are required by Samsung PM core. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-27ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is usedTomasz Figa1-1/+13
On DT-enabled systems pinctrl-exynos driver is responsible for handling of wake-up EINT interrupts. This patch adjusts wake-up mask configuration code to take wake-up mask value from pinctrl-exynos driver on DT-enabled systems. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-09ARM: EXYNOS5: Fix kernel dump in AFTR idle modeInderpal Singh1-0/+1
The kernel crashes while resuming from AFTR idle mode. It happens because L2 cache was not going into retention state. This patch configures the USE_RETENTION bit of ARM_L2_OPTION register so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of ARM_COMMON_OPTION register for L2RSTDISABLE signal. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Tested-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-07Merge tag 'dt-for-linus-2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
2013-05-04Merge tag 'firmware-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM platform specific firmware interfaces from Olof Johansson: "Two platforms, bcm and exynos have their own firmware interfaces using the "secure monitor call", this adds support for those. We had originally planned to have a third set of patches in here, which would extend support for the existing generic "psci" call that is used on multiple platforms as well as Xen and KVM guests, but that ended up getting dropped because the patches were not ready in time." * tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcm: mark bcm_kona_smc_init as __init ARM: bcm281xx: Add DT support for SMC handler ARM: bcm281xx: Add L2 cache enable code ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up ARM: EXYNOS: Add IO mapping for non-secure SYSRAM. ARM: EXYNOS: Add support for Exynos secure firmware ARM: EXYNOS: Add support for secure monitor calls ARM: Add interface for registering and calling firmware-specific operations
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds3-63/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds2-40/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-04-26ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device treeThomas Abraham1-1/+0
On device tree enabled exynos platforms, retrieve the physical base address of the chip-id controller from device tree and create a virtual I/O mapping for the chip-id controller. This helps to remove the chip-id controller entry from the statically defined I/O mapping tables. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 07:44:27 +0000