summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/ath/ar9170/main.c2
-rw-r--r--drivers/net/wireless/iwmc3200wifi/lmac.h2
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00debug.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c6
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c2
10 files changed, 14 insertions, 14 deletions
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index a6452af9c6c5..08dc42da0f63 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2512,7 +2512,7 @@ void *ar9170_alloc(size_t priv_size)
/*
* this buffer is used for rx stream reconstruction.
* Under heavy load this device (or the transport layer?)
- * tends to split the streams into seperate rx descriptors.
+ * tends to split the streams into separate rx descriptors.
*/
skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index a3a79b5e2898..a855a99e49b8 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd {
/* Power Management */
#define POWER_TABLE_CMD 0x77
-#define SAVE_RESTORE_ADRESS_CMD 0x78
+#define SAVE_RESTORE_ADDRESS_CMD 0x78
#define REPLY_WATERMARK_CMD 0x79
#define PM_DEBUG_STATISTIC_NOTIFIC 0x7B
#define PD_FLUSH_N_NOTIFICATION 0x7C
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index ee34c137e7cd..9b04964deced 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
/*
* The encryption key doesn't fit within the CSR cache,
- * this means we should allocate it seperately and use
+ * this means we should allocate it separately and use
* rt2x00usb_vendor_request() to send the key to the hardware.
*/
reg = KEY_ENTRY(key->hw_key_idx);
@@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
/*
* The driver does not support the IV/EIV generation
* in hardware. However it demands the data to be provided
- * both seperately as well as inside the frame.
+ * both separately as well as inside the frame.
* We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
* to ensure rt2x00lib will not strip the data from the
* frame after the copy, now we must tell mac80211
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5e4ee2023fcf..d27d7d5d850c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -99,7 +99,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
* There are 2 variations of the rt2870 firmware.
* a) size: 4kb
* b) size: 8kb
- * Note that (b) contains 2 seperate firmware blobs of 4k
+ * Note that (b) contains 2 separate firmware blobs of 4k
* within the file. The first blob is the same firmware as (a),
* but the second blob is for the additional chipsets.
*/
@@ -117,7 +117,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
/*
* 8kb firmware files must be checked as if it were
- * 2 seperate firmware files.
+ * 2 separate firmware files.
*/
while (offset < len) {
if (!rt2800usb_check_crc(data + offset, 4096))
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 70c04c282efc..28a1c46ec4eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -109,7 +109,7 @@ struct rt2x00debug_intf {
/*
* HW crypto statistics.
- * All statistics are stored seperately per cipher type.
+ * All statistics are stored separately per cipher type.
*/
struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b93731b79903..dd5ab8fe2321 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -394,7 +394,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
/*
* Hardware might have stripped the IV/EIV/ICV data,
* in that case it is possible that the data was
- * provided seperately (through hardware descriptor)
+ * provided separately (through hardware descriptor)
* in which case we should reinsert the data into the frame.
*/
if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 0b4801a14601..5b6b789cad3d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -497,7 +497,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
/*
* When hardware encryption is supported, and this frame
* is to be encrypted, we should strip the IV/EIV data from
- * the frame so we can provide it to the driver seperately.
+ * the frame so we can provide it to the driver separately.
*/
if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index e2da928dd9f0..177472742172 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
* The driver does not support the IV/EIV generation
* in hardware. However it doesn't support the IV/EIV
* inside the ieee80211 frame either, but requires it
- * to be provided seperately for the descriptor.
+ * to be provided separately for the descriptor.
* rt2x00lib will cut the IV/EIV data out of all frames
* given to us by mac80211, but we must tell mac80211
* to generate the IV/EIV data.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index f39a8ed17841..e77aec8d0a84 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
* The driver does not support the IV/EIV generation
* in hardware. However it doesn't support the IV/EIV
* inside the ieee80211 frame either, but requires it
- * to be provided seperately for the descriptor.
+ * to be provided separately for the descriptor.
* rt2x00lib will cut the IV/EIV data out of all frames
* given to us by mac80211, but we must tell mac80211
* to generate the IV/EIV data.
@@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
* The driver does not support the IV/EIV generation
* in hardware. However it doesn't support the IV/EIV
* inside the ieee80211 frame either, but requires it
- * to be provided seperately for the descriptor.
+ * to be provided separately for the descriptor.
* rt2x00lib will cut the IV/EIV data out of all frames
* given to us by mac80211, but we must tell mac80211
* to generate the IV/EIV data.
@@ -1661,7 +1661,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
/*
* Hardware has stripped IV/EIV data from 802.11 frame during
- * decryption. It has provided the data seperately but rt2x00lib
+ * decryption. It has provided the data separately but rt2x00lib
* should decide if it should be reinserted.
*/
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 2d555cc30508..a22a19203120 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -374,7 +374,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
* zd_mac_tx_failed - callback for failed frames
* @dev: the mac80211 wireless device
*
- * This function is called if a frame couldn't be successfully be
+ * This function is called if a frame couldn't be successfully
* transferred. The first frame from the tx queue, will be selected and
* reported as error to the upper layers.
*/