diff options
Diffstat (limited to 'drivers/ata/pata_sch.c')
| -rw-r--r-- | drivers/ata/pata_sch.c | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c new file mode 100644 index 000000000000..c8cc027789fe --- /dev/null +++ b/drivers/ata/pata_sch.c @@ -0,0 +1,206 @@ +/* + * pata_sch.c - Intel SCH PATA controllers + * + * Copyright (c) 2008 Alek Du <alek.du@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * Supports: + * Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at: + * http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/dmi.h> + +#define DRV_NAME "pata_sch" +#define DRV_VERSION "0.2" + +/* see SCH datasheet page 351 */ +enum { + D0TIM = 0x80, /* Device 0 Timing Register */ + D1TIM = 0x84, /* Device 1 Timing Register */ + PM = 0x07, /* PIO Mode Bit Mask */ + MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */ + UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */ + PPE = (1 << 30), /* Prefetch/Post Enable */ + USD = (1 << 31), /* Use Synchronous DMA */ +}; + +static int sch_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); +static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev); +static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev); + +static const struct pci_device_id sch_pci_tbl[] = { + /* Intel SCH PATA Controller */ + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 }, + { } /* terminate list */ +}; + +static struct pci_driver sch_pci_driver = { + .name = DRV_NAME, + .id_table = sch_pci_tbl, + .probe = sch_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static struct scsi_host_template sch_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations sch_pata_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_unknown, + .set_piomode = sch_set_piomode, + .set_dmamode = sch_set_dmamode, +}; + +static struct ata_port_info sch_port_info = { + .flags = 0, + .pio_mask = ATA_PIO4, /* pio0-4 */ + .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */ + .udma_mask = ATA_UDMA5, /* udma0-5 */ + .port_ops = &sch_pata_ops, +}; + +MODULE_AUTHOR("Alek Du <alek.du@intel.com>"); +MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sch_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +/** + * sch_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: ATA device + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int port = adev->devno ? D1TIM : D0TIM; + unsigned int data; + + pci_read_config_dword(dev, port, &data); + /* see SCH datasheet page 351 */ + /* set PIO mode */ + data &= ~(PM | PPE); + data |= pio; + /* enable PPE for block device */ + if (adev->class == ATA_DEV_ATA) + data |= PPE; + pci_write_config_dword(dev, port, data); +} + +/** + * sch_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: ATA device + * + * Set MW/UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int dma_mode = adev->dma_mode; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int port = adev->devno ? D1TIM : D0TIM; + unsigned int data; + + pci_read_config_dword(dev, port, &data); + /* see SCH datasheet page 351 */ + if (dma_mode >= XFER_UDMA_0) { + /* enable Synchronous DMA mode */ + data |= USD; + data &= ~UDM; + data |= (dma_mode - XFER_UDMA_0) << 16; + } else { /* must be MWDMA mode, since we masked SWDMA already */ + data &= ~(USD | MDM); + data |= (dma_mode - XFER_MW_DMA_0) << 8; + } + pci_write_config_dword(dev, port, data); +} + +/** + * sch_init_one - Register SCH ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in sch_pci_tbl matching with @pdev + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int __devinit sch_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + const struct ata_port_info *ppi[] = { &sch_port_info, NULL }; + struct ata_host *host; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* enable device and prepare host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + pci_set_master(pdev); + return ata_pci_sff_activate_host(host, ata_sff_interrupt, &sch_sht); +} + +static int __init sch_init(void) +{ + return pci_register_driver(&sch_pci_driver); +} + +static void __exit sch_exit(void) +{ + pci_unregister_driver(&sch_pci_driver); +} + +module_init(sch_init); +module_exit(sch_exit); |