diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/imx53-qsb.dts | 14 | ||||
-rw-r--r-- | arch/arm/boot/dts/logicpd-som-lv.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap5-board-common.dtsi | 7 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih410-b2260.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/kernel/traps.c | 20 | ||||
-rw-r--r-- | arch/arm/kernel/vmlinux-xip.lds.S | 5 | ||||
-rw-r--r-- | arch/arm/lib/backtrace.S | 37 | ||||
-rw-r--r-- | arch/arm/mach-omap2/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/id.c | 16 | ||||
-rw-r--r-- | arch/arm/mach-omap2/prm3xxx.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap2/voltage.c | 6 | ||||
-rw-r--r-- | arch/arm/mm/dma-mapping.c | 2 | ||||
-rw-r--r-- | arch/arm/mm/proc-v7m.S | 2 |
15 files changed, 74 insertions, 54 deletions
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index dec4b073ceb1..379939699164 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -64,8 +64,8 @@ }; ldo3_reg: ldo3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -76,8 +76,8 @@ }; ldo5_reg: ldo5 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; @@ -100,14 +100,14 @@ }; ldo9_reg: ldo9 { - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3600000>; regulator-always-on; }; ldo10_reg: ldo10 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3650000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 0ff1c2de95bf..26cce4d18405 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -13,6 +13,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + wl12xx_vmmc: wl12xx_vmmc { compatible = "regulator-fixed"; regulator-name = "vwl1271"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 731ec37aed5b..8f9a69ca818c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,9 +13,9 @@ }; }; - memory@0 { + memory@80000000 { device_type = "memory"; - reg = <0 0>; + reg = <0x80000000 0>; }; leds { diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 6365635fea5c..4caadb253249 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -124,6 +124,7 @@ compatible = "ti,abe-twl6040"; ti,model = "omap5-uevm"; + ti,jack-detection; ti,mclk-freq = <19200000>; ti,mcpdm = <&mcpdm>; @@ -415,7 +416,7 @@ ti,backup-battery-charge-high-current; }; - gpadc { + gpadc: gpadc { compatible = "ti,palmas-gpadc"; interrupts = <18 0 16 0 @@ -475,8 +476,8 @@ smps6_reg: smps6 { /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index ef2ff2f518f6..7fb507fcba7e 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -74,7 +74,7 @@ /* Low speed expansion connector */ spi0: spi@9844000 { label = "LS-SPI0"; - cs-gpio = <&pio30 3 0>; + cs-gpios = <&pio30 3 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 48fc24f36fcb..300a1bd5a6ec 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -282,11 +282,15 @@ uart1_pins_a: uart1@0 { allwinner,pins = "PG6", "PG7"; allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { allwinner,pins = "PG8", "PG9"; allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bc698383e822..9688ec0c6ef4 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); } +void dump_backtrace_stm(u32 *stack, u32 instruction) +{ + char str[80], *p; + unsigned int x; + int reg; + + for (reg = 10, x = 0, p = str; reg >= 0; reg--) { + if (instruction & BIT(reg)) { + p += sprintf(p, " r%d:%08x", reg, *stack--); + if (++x == 6) { + x = 0; + p = str; + printk("%s\n", str); + } + } + } + if (p != str) + printk("%s\n", str); +} + #ifndef CONFIG_ARM_UNWIND /* * Stack pointers should always be within the kernels view of diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 7fa487ef7e2f..37b2a11af345 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -3,6 +3,9 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> */ +/* No __ro_after_init data in the .rodata section - which will always be ro */ +#define RO_AFTER_INIT_DATA + #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> #include <asm/thread_info.h> @@ -223,6 +226,8 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; + *(.data..ro_after_init) + NOSAVE_DATA CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) READ_MOSTLY_DATA(L1_CACHE_BYTES) diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index fab5a50503ae..7d7952e5a3b1 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -10,6 +10,7 @@ * 27/03/03 Ian Molton Clean up CONFIG_CPU * */ +#include <linux/kern_levels.h> #include <linux/linkage.h> #include <asm/assembler.h> .text @@ -83,13 +84,13 @@ for_each_frame: tst frame, mask @ Check for address exceptions teq r3, r1, lsr #11 ldreq r0, [frame, #-8] @ get sp subeq r0, r0, #4 @ point at the last arg - bleq .Ldumpstm @ dump saved registers + bleq dump_backtrace_stm @ dump saved registers 1004: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, ip, lr, pc} ldr r3, .Ldsi @ instruction exists, teq r3, r1, lsr #11 subeq r0, frame, #16 - bleq .Ldumpstm @ dump saved registers + bleq dump_backtrace_stm @ dump saved registers teq sv_fp, #0 @ zero saved fp means beq no_frame @ no further frames @@ -112,38 +113,6 @@ ENDPROC(c_backtrace) .long 1004b, 1006b .popsection -#define instr r4 -#define reg r5 -#define stack r6 - -.Ldumpstm: stmfd sp!, {instr, reg, stack, r7, lr} - mov stack, r0 - mov instr, r1 - mov reg, #10 - mov r7, #0 -1: mov r3, #1 - ARM( tst instr, r3, lsl reg ) - THUMB( lsl r3, reg ) - THUMB( tst instr, r3 ) - beq 2f - add r7, r7, #1 - teq r7, #6 - moveq r7, #0 - adr r3, .Lcr - addne r3, r3, #1 @ skip newline - ldr r2, [stack], #-4 - mov r1, reg - adr r0, .Lfp - bl printk -2: subs reg, reg, #1 - bpl 1b - teq r7, #0 - adrne r0, .Lcr - blne printk - ldmfd sp!, {instr, reg, stack, r7, pc} - -.Lfp: .asciz " r%d:%08x%s" -.Lcr: .asciz "\n" .Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n" .align .Ldsi: .word 0xe92dd800 >> 11 @ stmfd sp!, {... fp, ip, lr, pc} diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a9afeebd59f2..0465338183c7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -71,6 +71,7 @@ config SOC_AM43XX select HAVE_ARM_TWD select ARM_ERRATA_754322 select ARM_ERRATA_775420 + select OMAP_INTERCONNECT config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2abd53ae3e7a..cc6d9fa60924 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void) #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ - printk(#feat" "); + n += scnprintf(buf + n, sizeof(buf) - n, #feat " "); static void __init omap3_cpuinfo(void) { const char *cpu_name; + char buf[64]; + int n = 0; + + memset(buf, 0, sizeof(buf)); /* * OMAP3430 and OMAP3530 are assumed to be same. @@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void) cpu_name = "OMAP3503"; } - sprintf(soc_name, "%s", cpu_name); + scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name); /* Print verbose information */ - pr_info("%s %s (", soc_name, soc_rev); + n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); @@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void) OMAP3_SHOW_FEATURE(neon); OMAP3_SHOW_FEATURE(isp); OMAP3_SHOW_FEATURE(192mhz_clk); - - printk(")\n"); + if (*(buf + n - 1) == ' ') + n--; + n += scnprintf(buf + n, sizeof(buf) - n, ")\n"); + pr_info("%s", buf); } #define OMAP3_CHECK_FEATURE(status,feat) \ diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 62680aad2126..718981bb80cd 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) if (has_uart4) { en_uart4_mask = OMAP3630_EN_UART4_MASK; grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK; + } else { + en_uart4_mask = 0; + grpsel_uart4_mask = 0; } /* Enable wakeups in PER */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index cba8cada8c81..cd15dbd62671 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } + if (!voltdm->volt_data) { + pr_err("%s: No voltage data defined for vdd_%s\n", + __func__, voltdm->name); + return -ENODATA; + } + /* Adjust voltage to the exact voltage from the OPP table */ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { if (voltdm->volt_data[i].volt_nominal >= target_volt) { diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ab4f74536057..ab7710002ba6 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void) dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); return 0; } -fs_initcall(dma_debug_do_init); +core_initcall(dma_debug_do_init); #ifdef CONFIG_ARM_DMA_USE_IOMMU diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index f6d333f09bfe..8dea61640cc1 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin) ret lr ENDPROC(cpu_cm7_proc_fin) - .section ".text.init", #alloc, #execinstr + .section ".init.text", #alloc, #execinstr __v7m_cm7_setup: mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP) |