diff options
35 files changed, 2274 insertions, 1818 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt new file mode 100644 index 000000000000..826e8a879121 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt @@ -0,0 +1,22 @@ +AXP20X and AXP22X PMICs' AC power supply + +Required Properties: + - compatible: One of: + "x-powers,axp202-ac-power-supply" + "x-powers,axp221-ac-power-supply" + +This node is a subnode of the axp20x PMIC. + +The AXP20X can read the current current and voltage supplied by AC by +reading ADC channels from the AXP20X ADC. + +The AXP22X is only able to tell if an AC power supply is present and +usable. + +Example: + +&axp209 { + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp202-ac-power-supply"; + }; +}; diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt index f1d7beec45bf..ba8d35f66cbe 100644 --- a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt +++ b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt @@ -3,6 +3,11 @@ AXP20x USB power supply Required Properties: -compatible: One of: "x-powers,axp202-usb-power-supply" "x-powers,axp221-usb-power-supply" + "x-powers,axp223-usb-power-supply" + +The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight +variations such as the former being able to set the VBUS power supply max +current to 100mA, unlike the latter. This node is a subnode of the axp20x PMIC. diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt new file mode 100644 index 000000000000..b0c95ef63e68 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt @@ -0,0 +1,36 @@ +Binding for TI BQ27XXX fuel gauge family + +Required properties: +- compatible: Should contain one of the following: + * "ti,bq27200" - BQ27200 + * "ti,bq27210" - BQ27210 + * "ti,bq27500" - deprecated, use revision specific property below + * "ti,bq27510" - deprecated, use revision specific property below + * "ti,bq27520" - deprecated, use revision specific property below + * "ti,bq27500-1" - BQ27500/1 + * "ti,bq27510g1" - BQ27510-g1 + * "ti,bq27510g2" - BQ27510-g2 + * "ti,bq27510g3" - BQ27510-g3 + * "ti,bq27520g1" - BQ27520-g1 + * "ti,bq27520g2" - BQ27520-g2 + * "ti,bq27520g3" - BQ27520-g3 + * "ti,bq27520g4" - BQ27520-g4 + * "ti,bq27530" - BQ27530 + * "ti,bq27531" - BQ27531 + * "ti,bq27541" - BQ27541 + * "ti,bq27542" - BQ27542 + * "ti,bq27546" - BQ27546 + * "ti,bq27742" - BQ27742 + * "ti,bq27545" - BQ27545 + * "ti,bq27421" - BQ27421 + * "ti,bq27425" - BQ27425 + * "ti,bq27441" - BQ27441 + * "ti,bq27621" - BQ27621 +- reg: integer, i2c address of the device. + +Example: + +bq27510g3 { + compatible = "ti,bq27510g3"; + reg = <0x55>; +}; diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt index 65b88fac854b..06f8a5ddb68e 100644 --- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt +++ b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt @@ -105,6 +105,22 @@ PROPERTIES regulation must be done externally to fully comply with the JEITA safety guidelines if this flag is set. +- usb_otg_in-supply: + Usage: optional + Value type: <phandle> + Description: Reference to the regulator supplying power to the USB_OTG_IN + pin. + +child nodes: +- otg-vbus: + Usage: optional + Description: This node defines a regulator used to control the direction + of VBUS voltage - specifically: whether to supply voltage + to VBUS for host mode operation of the OTG port, or allow + input voltage from external VBUS for charging. In the + hardware, the supply for this regulator comes from + usb_otg_in-supply. + EXAMPLE charger@1000 { compatible = "qcom,pm8941-charger"; @@ -128,4 +144,7 @@ charger@1000 { qcom,fast-charge-current-limit = <1000000>; qcom,dc-charge-current-limit = <1000000>; + usb_otg_in-supply = <&pm8941_5vs1>; + + otg-vbus {}; }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt new file mode 100644 index 000000000000..a3719623a94f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt @@ -0,0 +1,23 @@ +SBS sbs-charger +~~~~~~~~~~ + +Required properties: + - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts". +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with + "interrupt-parent". If an interrupt is not provided the driver will switch + automatically to polling. + +Example: + + ltc4100@9 { + compatible = "lltc,ltc4100", "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt index 3bf55757ceec..de45e1a2a4d9 100644 --- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt +++ b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt @@ -8,8 +8,10 @@ Optional properties : - interrupts : Specify the interrupt to be used to trigger when the AC adapter is either plugged in or removed. - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter - presence. This is a Host GPIO that is configured as an input and - connected to the bq24735. + status. This is a Host GPIO that is configured as an input and connected + to the ACOK pin on the bq24735. Note: for backwards compatibility reasons, + the GPIO must be active on AC adapter absence despite ACOK being active + (high) on AC adapter presence. - ti,charge-current : Used to control and set the charging current. This value must be between 128mA and 8.128A with a 64mA step resolution. The POR value is 0x0000h. This number is in mA (e.g. 8192), see spec for more information @@ -25,6 +27,8 @@ Optional properties : - ti,external-control : Indicates that the charger is configured externally and that the host should not attempt to enable/disable charging or set the charge voltage/current. + - poll-interval : In case 'interrupts' is not specified, poll AC adapter + presence with this interval (milliseconds). Example: diff --git a/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt new file mode 100644 index 000000000000..e03e85ae6572 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt @@ -0,0 +1,25 @@ +Maxim MAX14656 / AL32 USB Charger Detector + +Required properties : +- compatible : "maxim,max14656"; +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: interrupt line + +Example: + +&i2c2 { + clock-frequency = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + max14656@35 { + compatible = "maxim,max14656"; + reg = <0x35>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_detect>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index abeb77217a21..b8cacccf18c8 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -32,7 +32,7 @@ config POWER_RESET_AT91_RESET config POWER_RESET_AT91_SAMA5D2_SHDWC tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver" - depends on ARCH_AT91 || COMPILE_TEST + depends on ARCH_AT91 default SOC_SAMA5 help This driver supports the alternate shutdown controller for some Atmel diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c index a85dd4d233af..c6c3beea72f9 100644 --- a/drivers/power/reset/at91-poweroff.c +++ b/drivers/power/reset/at91-poweroff.c @@ -14,9 +14,12 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/printk.h> +#include <soc/at91/at91sam9_ddrsdr.h> + #define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ #define AT91_SHDW_SHDW BIT(0) /* Shut Down command */ #define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ @@ -50,6 +53,7 @@ static const char *shdwc_wakeup_modes[] = { static void __iomem *at91_shdwc_base; static struct clk *sclk; +static void __iomem *mpddrc_base; static void __init at91_wakeup_status(void) { @@ -73,6 +77,29 @@ static void at91_poweroff(void) writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR); } +static void at91_lpddr_poweroff(void) +{ + asm volatile( + /* Align to cache lines */ + ".balign 32\n\t" + + /* Ensure AT91_SHDW_CR is in the TLB by reading it */ + " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t" + + /* Power down SDRAM0 */ + " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" + /* Shutdown CPU */ + " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t" + + " b .\n\t" + : + : "r" (mpddrc_base), + "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF), + "r" (at91_shdwc_base), + "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW) + : "r0"); +} + static int at91_poweroff_get_wakeup_mode(struct device_node *np) { const char *pm; @@ -124,6 +151,8 @@ static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev) static int __init at91_poweroff_probe(struct platform_device *pdev) { struct resource *res; + struct device_node *np; + u32 ddr_type; int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -150,12 +179,30 @@ static int __init at91_poweroff_probe(struct platform_device *pdev) pm_power_off = at91_poweroff; + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc"); + if (!np) + return 0; + + mpddrc_base = of_iomap(np, 0); + of_node_put(np); + + if (!mpddrc_base) + return 0; + + ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD; + if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) || + (ddr_type == AT91_DDRSDRC_MD_LPDDR3)) + pm_power_off = at91_lpddr_poweroff; + else + iounmap(mpddrc_base); + return 0; } static int __exit at91_poweroff_remove(struct platform_device *pdev) { - if (pm_power_off == at91_poweroff) + if (pm_power_off == at91_poweroff || + pm_power_off == at91_lpddr_poweroff) pm_power_off = NULL; clk_disable_unprepare(sclk); @@ -163,6 +210,11 @@ static int __exit at91_poweroff_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id at91_ramc_of_match[] = { + { .compatible = "atmel,sama5d3-ddramc", }, + { /* sentinel */ } +}; + static const struct of_device_id at91_poweroff_of_match[] = { { .compatible = "atmel,at91sam9260-shdwc", }, { .compatible = "atmel,at91sam9rl-shdwc", }, diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c index 568580cf0655..b99769f8ab15 100644 --- a/drivers/power/reset/at91-reset.c +++ b/drivers/power/reset/at91-reset.c @@ -134,6 +134,15 @@ static int sama5d3_restart(struct notifier_block *this, unsigned long mode, return NOTIFY_DONE; } +static int samx7_restart(struct notifier_block *this, unsigned long mode, + void *cmd) +{ + writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PROCRST), + at91_rstc_base); + + return NOTIFY_DONE; +} + static void __init at91_reset_status(struct platform_device *pdev) { u32 reg = readl(at91_rstc_base + AT91_RSTC_SR); @@ -173,6 +182,7 @@ static const struct of_device_id at91_reset_of_match[] = { { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart }, { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, { .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart }, + { .compatible = "atmel,samx7-rstc", .data = samx7_restart }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, at91_reset_of_match); @@ -238,20 +248,12 @@ static int __exit at91_reset_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id at91_reset_plat_match[] = { - { "at91-sam9260-reset", (unsigned long)at91sam9260_restart }, - { "at91-sam9g45-reset", (unsigned long)at91sam9g45_restart }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(platform, at91_reset_plat_match); - static struct platform_driver at91_reset_driver = { .remove = __exit_p(at91_reset_remove), .driver = { .name = "at91-reset", .of_match_table = at91_reset_of_match, }, - .id_table = at91_reset_plat_match, }; module_platform_driver_probe(at91_reset_driver, at91_reset_probe); diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c index 8a5ac9706c9c..90b0b5a70ce5 100644 --- a/drivers/power/reset/at91-sama5d2_shdwc.c +++ b/drivers/power/reset/at91-sama5d2_shdwc.c @@ -22,9 +22,12 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/printk.h> +#include <soc/at91/at91sam9_ddrsdr.h> + #define SLOW_CLOCK_FREQ 32768 #define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ @@ -75,6 +78,7 @@ struct shdwc { */ static struct shdwc *at91_shdwc; static struct clk *sclk; +static void __iomem *mpddrc_base; static const unsigned long long sdwc_dbc_period[] = { 0, 3, 32, 512, 4096, 32768, @@ -108,6 +112,29 @@ static void at91_poweroff(void) at91_shdwc->at91_shdwc_base + AT91_SHDW_CR); } +static void at91_lpddr_poweroff(void) +{ + asm volatile( + /* Align to cache lines */ + ".balign 32\n\t" + + /* Ensure AT91_SHDW_CR is in the TLB by reading it */ + " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t" + + /* Power down SDRAM0 */ + " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" + /* Shutdown CPU */ + " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t" + + " b .\n\t" + : + : "r" (mpddrc_base), + "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF), + "r" (at91_shdwc->at91_shdwc_base), + "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW) + : "r0"); +} + static u32 at91_shdwc_debouncer_value(struct platform_device *pdev, u32 in_period_us) { @@ -212,6 +239,8 @@ static int __init at91_shdwc_probe(struct platform_device *pdev) { struct resource *res; const struct of_device_id *match; + struct device_node *np; + u32 ddr_type; int ret; if (!pdev->dev.of_node) @@ -249,6 +278,23 @@ static int __init at91_shdwc_probe(struct platform_device *pdev) pm_power_off = at91_poweroff; + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc"); + if (!np) + return 0; + + mpddrc_base = of_iomap(np, 0); + of_node_put(np); + + if (!mpddrc_base) + return 0; + + ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD; + if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) || + (ddr_type == AT91_DDRSDRC_MD_LPDDR3)) + pm_power_off = at91_lpddr_poweroff; + else + iounmap(mpddrc_base); + return 0; } @@ -256,7 +302,8 @@ static int __exit at91_shdwc_remove(struct platform_device *pdev) { struct shdwc *shdw = platform_get_drvdata(pdev); - if (pm_power_off == at91_poweroff) + if (pm_power_off == at91_poweroff || + pm_power_off == at91_lpddr_poweroff) pm_power_off = NULL; /* Reset values to disable wake-up features */ diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 76806a0be820..da54ac88f068 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -164,6 +164,12 @@ config BATTERY_SBS Say Y to include support for SBS battery driver for SBS-compliant gas gauges. +config CHARGER_SBS + tristate "SBS Compliant charger" + depends on I2C + help + Say Y to include support for SBS compilant battery chargers. + config BATTERY_BQ27XXX tristate "BQ27xxx battery driver" help @@ -214,6 +220,18 @@ config BATTERY_DA9150 This driver can also be built as a module. If so, the module will be called da9150-fg. +config CHARGER_AXP20X + tristate "X-Powers AXP20X and AXP22X AC power supply driver" + depends on MFD_AXP20X + depends on AXP20X_ADC + depends on IIO + help + Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC + power supply. + + This driver can also be built as a module. If so, the module will be + called axp20x_ac_power. + config AXP288_CHARGER tristate "X-Powers AXP288 Charger" depends on MFD_AXP20X && EXTCON_AXP288 @@ -292,13 +310,6 @@ config BATTERY_JZ4740 This driver can be build as a module. If so, the module will be called jz4740-battery. -config BATTERY_INTEL_MID - tristate "Battery driver for Intel MID platforms" - depends on INTEL_SCU_IPC && SPI - help - Say Y here to enable the battery driver on Intel MID - platforms. - config BATTERY_RX51 tristate "Nokia RX-51 (N900) battery driver" depends on TWL4030_MADC @@ -370,6 +381,16 @@ config CHARGER_MAX14577 Say Y to enable support for the battery charger control sysfs and platform data of MAX14577/77836 MUICs. +config CHARGER_DETECTOR_MAX14656 + tristate "Maxim MAX14656 USB charger detector" + depends on I2C + depends on OF + help + Say Y to enable support for the Maxim MAX14656 USB charger detector. + The device is compliant with the USB Battery Charging Specification + Revision 1.2 and can be found e.g. in Kindle 4/5th generation + readers and certain LG devices. + config CHARGER_MAX77693 tristate "Maxim MAX77693 battery charger driver" depends on MFD_MAX77693 @@ -395,6 +416,7 @@ config CHARGER_QCOM_SMBB depends on MFD_SPMI_PMIC || COMPILE_TEST depends on OF depends on EXTCON + depends on REGULATOR help Say Y to include support for the Switch-Mode Battery Charger and Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 36c599d9a495..3789a2c06fdf 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_TEST_POWER) += test_power.o obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o +obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o @@ -31,6 +32,7 @@ obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o +obj-$(CONFIG_CHARGER_SBS) += sbs-charger.o obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o @@ -47,7 +49,6 @@ obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o -obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o @@ -58,6 +59,7 @@ obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o +obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c index 6ffdc18f2599..f7a35ebfbab2 100644 --- a/drivers/power/supply/ab8500_btemp.c +++ b/drivers/power/supply/ab8500_btemp.c @@ -76,8 +76,8 @@ struct ab8500_btemp_ranges { * @dev: Pointer to the structure device * @node: List of AB8500 BTEMPs, hence prepared for reentrance * @curr_source: What current source we use, in uA - * @bat_temp: Dispatched battery temperature in degree Celcius - * @prev_bat_temp Last measured battery temperature in degree Celcius + * @bat_temp: Dispatched battery temperature in degree Celsius + * @prev_bat_temp Last measured battery temperature in degree Celsius * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc * @fg: Pointer to the struct fg @@ -123,10 +123,7 @@ static LIST_HEAD(ab8500_btemp_list); */ struct ab8500_btemp *ab8500_btemp_get(void) { - struct ab8500_btemp *btemp; - btemp = list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node); - - return btemp; + return list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node); } EXPORT_SYMBOL(ab8500_btemp_get); @@ -464,13 +461,13 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) * @tbl_size: size of the resistance to temperature table * @res: resistance to calculate the temperature from * - * This function returns the battery temperature in degrees Celcius + * This function returns the battery temperature in degrees Celsius * based on the NTC resistance. */ static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di, const struct abx500_res_to_temp *tbl, int tbl_size, int res) { - int i, temp; + int i; /* * Calculate the formula for the straight line * Simple interpolation if we are within @@ -488,9 +485,8 @@ static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di, i++; } - temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) * + return tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) * (res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist); - return temp; } /** diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c new file mode 100644 index 000000000000..38f4e87cf24d --- /dev/null +++ b/drivers/power/supply/axp20x_ac_power.c @@ -0,0 +1,253 @@ +/* + * AXP20X and AXP22X PMICs' ACIN power supply driver + * + * Copyright (C) 2016 Free Electrons + * Quentin Schulz <quentin.schulz@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/axp20x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/iio/consumer.h> + +#define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7) +#define AXP20X_PWR_STATUS_ACIN_AVAIL BIT(6) + +#define DRVNAME "axp20x-ac-power-supply" + +struct axp20x_ac_power { + struct regmap *regmap; + struct power_supply *supply; + struct iio_channel *acin_v; + struct iio_channel *acin_i; +}; + +static irqreturn_t axp20x_ac_power_irq(int irq, void *devid) +{ + struct axp20x_ac_power *power = devid; + + power_supply_changed(power->supply); + + return IRQ_HANDLED; +} + +static int axp20x_ac_power_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct axp20x_ac_power *power = power_supply_get_drvdata(psy); + int ret, reg; + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®); + if (ret) + return ret; + + if (reg & AXP20X_PWR_STATUS_ACIN_PRESENT) { + val->intval = POWER_SUPPLY_HEALTH_GOOD; + return 0; + } + + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; + return 0; + + case POWER_SUPPLY_PROP_PRESENT: + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®); + if (ret) + return ret; + + val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_PRESENT); + return 0; + + case POWER_SUPPLY_PROP_ONLINE: + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®); + if (ret) + return ret; + + val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL); + return 0; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = iio_read_channel_processed(power->acin_v, &val->intval); + if (ret) + return ret; + + /* IIO framework gives mV but Power Supply framework gives uV */ + val->intval *= 1000; + + return 0; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = iio_read_channel_processed(power->acin_i, &val->intval); + if (ret) + return ret; + + /* IIO framework gives mA but Power Supply framework gives uA */ + val->intval *= 1000; + + return 0; + + default: + return -EINVAL; + } + + return -EINVAL; +} + +static enum power_supply_property axp20x_ac_power_properties[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static enum power_supply_property axp22x_ac_power_properties[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, +}; + +static const struct power_supply_desc axp20x_ac_power_desc = { + .name = "axp20x-ac", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = axp20x_ac_power_properties, + .num_properties = ARRAY_SIZE(axp20x_ac_power_properties), + .get_property = axp20x_ac_power_get_property, +}; + +static const struct power_supply_desc axp22x_ac_power_desc = { + .name = "axp22x-ac", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = axp22x_ac_power_properties, + .num_properties = ARRAY_SIZE(axp22x_ac_power_properties), + .get_property = axp20x_ac_power_get_property, +}; + +struct axp_data { + const struct power_supply_desc *power_desc; + bool acin_adc; +}; + +static const struct axp_data axp20x_data = { + .power_desc = &axp20x_ac_power_desc, + .acin_adc = true, +}; + +static const struct axp_data axp22x_data = { + .power_desc = &axp22x_ac_power_desc, + .acin_adc = false, +}; + +static int axp20x_ac_power_probe(struct platform_device *pdev) +{ + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct power_supply_config psy_cfg = {}; + struct axp20x_ac_power *power; + struct axp_data *axp_data; + static const char * const irq_names[] = { "ACIN_PLUGIN", "ACIN_REMOVAL", + NULL }; + int i, irq, ret; + + if (!of_device_is_available(pdev->dev.of_node)) + return -ENODEV; + + if (!axp20x) { + dev_err(&pdev->dev, "Parent drvdata not set\n"); + return -EINVAL; + } + + power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL); + if (!power) + return -ENOMEM; + + axp_data = (struct axp_data *)of_device_get_match_data(&pdev->dev); + + if (axp_data->acin_adc) { + power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v"); + if (IS_ERR(power->acin_v)) { + if (PTR_ERR(power->acin_v) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(power->acin_v); + } + + power->acin_i = devm_iio_channel_get(&pdev->dev, "acin_i"); + if (IS_ERR(power->acin_i)) { + if (PTR_ERR(power->acin_i) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(power->acin_i); + } + } + + power->regmap = dev_get_regmap(pdev->dev.parent, NULL); + + platform_set_drvdata(pdev, power); + + psy_cfg.of_node = pdev->dev.of_node; + psy_cfg.drv_data = power; + + power->supply = devm_power_supply_register(&pdev->dev, + axp_data->power_desc, + &psy_cfg); + if (IS_ERR(power->supply)) + return PTR_ERR(power->supply); + + /* Request irqs after registering, as irqs may trigger immediately */ + for (i = 0; irq_names[i]; i++) { + irq = platform_get_irq_byname(pdev, irq_names[i]); + if (irq < 0) { + dev_warn(&pdev->dev, "No IRQ for %s: %d\n", + irq_names[i], irq); + continue; + } + irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq); + ret = devm_request_any_context_irq(&pdev->dev, irq, + axp20x_ac_power_irq, 0, + DRVNAME, power); + if (ret < 0) + dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n", + irq_names[i], ret); + } + + return 0; +} + +static const struct of_device_id axp20x_ac_power_match[] = { + { + .compatible = "x-powers,axp202-ac-power-supply", + .data = (void *)&axp20x_data, + }, { + .compatible = "x-powers,axp221-ac-power-supply", + .data = (void *)&axp22x_data, + }, { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, axp20x_ac_power_match); + +static struct platform_driver axp20x_ac_power_driver = { + .probe = axp20x_ac_power_probe, + .driver = { + .name = DRVNAME, + .of_match_table = axp20x_ac_power_match, + }, +}; + +module_platform_driver(axp20x_ac_power_driver); + +MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); +MODULE_DESCRIPTION("AXP20X and AXP22X PMICs' AC power supply driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c index 6af6feb7058d..2397c482656e 100644 --- a/drivers/power/supply/axp20x_usb_power.c +++ b/drivers/power/supply/axp20x_usb_power.c @@ -17,10 +17,12 @@ #include <linux/mfd/axp20x.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/regmap.h> #include <linux/slab.h> +#include <linux/iio/consumer.h> #define DRVNAME "axp20x-usb-power-supply" @@ -30,6 +32,8 @@ #define AXP20X_USB_STATUS_VBUS_VALID BIT(2) #define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000) +#define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3) +#define AXP20X_VBUS_VHOLD_OFFSET 3 #define AXP20X_VBUS_CLIMIT_MASK 3 #define AXP20X_VBUC_CLIMIT_900mA 0 #define AXP20X_VBUC_CLIMIT_500mA 1 @@ -45,6 +49,9 @@ struct axp20x_usb_power { struct device_node *np; struct regmap *regmap; struct power_supply *supply; + enum axp20x_variants axp20x_id; + struct iio_channel *vbus_v; + struct iio_channel *vbus_i; }; static irqreturn_t axp20x_usb_power_irq(int irq, void *devid) @@ -72,6 +79,20 @@ static int axp20x_usb_power_get_property(struct power_supply *psy, val->intval = AXP20X_VBUS_VHOLD_uV(v); return 0; case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (IS_ENABLED(CONFIG_AXP20X_ADC)) { + ret = iio_read_channel_processed(power->vbus_v, + &val->intval); + if (ret) + return ret; + + /* + * IIO framework gives mV but Power Supply framework + * gives uV. + */ + val->intval *= 1000; + return 0; + } + ret = axp20x_read_variable_width(power->regmap, AXP20X_VBUS_V_ADC_H, 12); if (ret < 0) @@ -86,12 +107,10 @@ static int axp20x_usb_power_get_property(struct power_supply *psy, switch (v & AXP20X_VBUS_CLIMIT_MASK) { case AXP20X_VBUC_CLIMIT_100mA: - if (of_device_is_compatible(power->np, - "x-powers,axp202-usb-power-supply")) { - val->intval = 100000; - } else { + if (power->axp20x_id == AXP221_ID) val->intval = -1; /* No 100mA limit */ - } + else + val->intval = 100000; break; case AXP20X_VBUC_CLIMIT_500mA: val->intval = 500000; @@ -105,6 +124,20 @@ static int axp20x_usb_power_get_property(struct power_supply *psy, } return 0; case POWER_SUPPLY_PROP_CURRENT_NOW: + if (IS_ENABLED(CONFIG_AXP20X_ADC)) { + ret = iio_read_channel_processed(power->vbus_i, + &val->intval); + if (ret) + return ret; + + /* + * IIO framework gives mA but Power Supply framework + * gives uA. + */ + val->intval *= 1000; + return 0; + } + ret = axp20x_read_variable_width(power->regmap, AXP20X_VBUS_I_ADC_H, 12); if (ret < 0) @@ -130,8 +163,7 @@ static int axp20x_usb_power_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_HEALTH_GOOD; - if (of_device_is_compatible(power->np, - "x-powers,axp202-usb-power-supply")) { + if (power->axp20x_id == AXP202_ID) { ret = regmap_read(power->regmap, AXP20X_USB_OTG_STATUS, &v); if (ret) @@ -155,6 +187,81 @@ static int axp20x_usb_power_get_property(struct power_supply *psy, return 0; } +static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power, + int intval) +{ + int val; + + switch (intval) { + case 4000000: + case 4100000: + case 4200000: + case 4300000: + case 4400000: + case 4500000: + case 4600000: + case 4700000: + val = (intval - 4000000) / 100000; + return regmap_update_bits(power->regmap, + AXP20X_VBUS_IPSOUT_MGMT, + AXP20X_VBUS_VHOLD_MASK, + val << AXP20X_VBUS_VHOLD_OFFSET); + default: + return -EINVAL; + } + + return -EINVAL; +} + +static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power, + int intval) +{ + int val; + + switch (intval) { + case 100000: + if (power->axp20x_id == AXP221_ID) + return -EINVAL; + case 500000: + case 900000: + val = (900000 - intval) / 400000; + return regmap_update_bits(power->regmap, + AXP20X_VBUS_IPSOUT_MGMT, + AXP20X_VBUS_CLIMIT_MASK, val); + default: + return -EINVAL; + } + + return -EINVAL; +} + +static int axp20x_usb_power_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct axp20x_usb_power *power = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + return axp20x_usb_power_set_voltage_min(power, val->intval); + + case POWER_SUPPLY_PROP_CURRENT_MAX: + return axp20x_usb_power_set_current_max(power, val->intval); + + default: + return -EINVAL; + } + + return -EINVAL; +} + +static int axp20x_usb_power_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN || + psp == POWER_SUPPLY_PROP_CURRENT_MAX; +} + static enum power_supply_property axp20x_usb_power_properties[] = { POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_PRESENT, @@ -178,7 +285,9 @@ static const struct power_supply_desc axp20x_usb_power_desc = { .type = POWER_SUPPLY_TYPE_USB, .properties = axp20x_usb_power_properties, .num_properties = ARRAY_SIZE(axp20x_usb_power_properties), + .property_is_writeable = axp20x_usb_power_prop_writeable, .get_property = axp20x_usb_power_get_property, + .set_property = axp20x_usb_power_set_property, }; static const struct power_supply_desc axp22x_usb_power_desc = { @@ -186,9 +295,41 @@ static const struct power_supply_desc axp22x_usb_power_desc = { .type = POWER_SUPPLY_TYPE_USB, .properties = axp22x_usb_power_properties, .num_properties = ARRAY_SIZE(axp22x_usb_power_properties), + .property_is_writeable = axp20x_usb_power_prop_writeable, .get_property = axp20x_usb_power_get_property, + .set_property = axp20x_usb_power_set_property, }; +static int configure_iio_channels(struct platform_device *pdev, + struct axp20x_usb_power *power) +{ + power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); + if (IS_ERR(power->vbus_v)) { + if (PTR_ERR(power->vbus_v) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(power->vbus_v); + } + + power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i"); + if (IS_ERR(power->vbus_i)) { + if (PTR_ERR(power->vbus_i) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(power->vbus_i); + } + + return 0; +} + +static int configure_adc_registers(struct axp20x_usb_power *power) +{ + /* Enable vbus voltage and current measurement */ + return regmap_update_bits(power->regmap, AXP20X_ADC_EN1, + AXP20X_ADC_EN1_VBUS_CURR | + AXP20X_ADC_EN1_VBUS_VOLT, + AXP20X_ADC_EN1_VBUS_CURR | + AXP20X_ADC_EN1_VBUS_VOLT); +} + static int axp20x_usb_power_probe(struct platform_device *pdev) { struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); @@ -214,11 +355,13 @@ static int axp20x_usb_power_probe(struct platform_device *pdev) if (!power) return -ENOMEM; + power->axp20x_id = (enum axp20x_variants)of_device_get_match_data( + &pdev->dev); + power->np = pdev->dev.of_node; power->regmap = axp20x->regmap; - if (of_device_is_compatible(power->np, - "x-powers,axp202-usb-power-supply")) { + if (power->axp20x_id == AXP202_ID) { /* Enable vbus valid checking */ ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON, AXP20X_VBUS_MON_VBUS_VALID, @@ -226,17 +369,18 @@ static int axp20x_usb_power_probe(struct platform_device *pdev) if (ret) return ret; - /* Enable vbus voltage and current measurement */ - ret = regmap_update_bits(power->regmap, AXP20X_ADC_EN1, - AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT, - AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT); + if (IS_ENABLED(CONFIG_AXP20X_ADC)) + ret = configure_iio_channels(pdev, power); + else + ret = configure_adc_registers(power); + if (ret) return ret; usb_power_desc = &axp20x_usb_power_desc; irq_names = axp20x_irq_names; - } else if (of_device_is_compatible(power->np, - "x-powers,axp221-usb-power-supply")) { + } else if (power->axp20x_id == AXP221_ID || + power->axp20x_id == AXP223_ID) { usb_power_desc = &axp22x_usb_power_desc; irq_names = axp22x_irq_names; } else { @@ -273,9 +417,16 @@ static int axp20x_usb_power_probe(struct platform_device *pdev) } static const struct of_device_id axp20x_usb_power_match[] = { - { .compatible = "x-powers,axp202-usb-power-supply" }, - { .compatible = "x-powers,axp221-usb-power-supply" }, - { } + { + .compatible = "x-powers,axp202-usb-power-supply", + .data = (void *)AXP202_ID, + }, { + .compatible = "x-powers,axp221-usb-power-supply", + .data = (void *)AXP221_ID, + }, { + .compatible = "x-powers,axp223-usb-power-supply", + .data = (void *)AXP223_ID, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, axp20x_usb_power_match); diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c index 75b8e0c7402b..6be2fe27bb07 100644 --- a/drivers/power/supply/axp288_charger.c +++ b/drivers/power/supply/axp288_charger.c @@ -90,20 +90,6 @@ #define CHRG_VLTFC_0C 0xA5 /* 0 DegC */ #define CHRG_VHTFC_45C 0x1F /* 45 DegC */ -#define BAT_IRQ_CFG_CHRG_DONE (1 << 2) -#define BAT_IRQ_CFG_CHRG_START (1 << 3) -#define BAT_IRQ_CFG_BAT_SAFE_EXIT (1 << 4) -#define BAT_IRQ_CFG_BAT_SAFE_ENTER (1 << 5) -#define BAT_IRQ_CFG_BAT_DISCON (1 << 6) -#define BAT_IRQ_CFG_BAT_CONN (1 << 7) -#define BAT_IRQ_CFG_BAT_MASK 0xFC - -#define TEMP_IRQ_CFG_QCBTU (1 << 4) -#define TEMP_IRQ_CFG_CBTU (1 << 5) -#define TEMP_IRQ_CFG_QCBTO (1 << 6) -#define TEMP_IRQ_CFG_CBTO (1 << 7) -#define TEMP_IRQ_CFG_MASK 0xF0 - #define FG_CNTL_OCV_ADJ_EN (1 << 3) #define CV_4100MV 4100 /* 4100mV */ @@ -127,6 +113,10 @@ #define ILIM_3000MA 3000 /* 3000mA */ #define AXP288_EXTCON_DEV_NAME "axp288_extcon" +#define USB_HOST_EXTCON_DEV_NAME "INT3496:00" + +static const unsigned int cable_ids[] = + { EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP }; enum { VBUS_OV_IRQ = 0, @@ -143,7 +133,6 @@ enum { struct axp288_chrg_info { struct platform_device *pdev; - struct axp20x_chrg_pdata *pdata; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; int irq[CHRG_INTR_END]; @@ -163,20 +152,16 @@ struct axp288_chrg_info { struct extcon_dev *edev; bool connected; enum power_supply_type chg_type; - struct notifier_block nb; + struct notifier_block nb[ARRAY_SIZE(cable_ids)]; struct work_struct work; } cable; - int health; int inlmt; int cc; int cv; int max_cc; int max_cv; - bool online; - bool present; - bool enable_charger; - bool is_charger_enabled; + int is_charger_enabled; }; static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc) @@ -305,6 +290,9 @@ static int axp288_charger_enable_charger(struct axp288_chrg_info *info, { int ret; + if ((int)enable == info->is_charger_enabled) + return 0; + if (enable) ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1, CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN); @@ -430,8 +418,7 @@ static int axp288_charger_usb_get_property(struct power_supply *psy, ret = axp288_charger_is_present(info); if (ret < 0) goto psy_get_prop_fail; - info->present = ret; - val->intval = info->present; + val->intval = ret; break; case POWER_SUPPLY_PROP_ONLINE: /* Check for OTG case first */ @@ -442,8 +429,7 @@ static int axp288_charger_usb_get_property(struct power_supply *psy, ret = axp288_charger_is_online(info); if (ret < 0) goto psy_get_prop_fail; - info->online = ret; - val->intval = info->online; + val->intval = ret; break; case POWER_SUPPLY_PROP_HEALTH: val->intval = axp288_get_charger_health(info); @@ -576,20 +562,20 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work) struct axp288_chrg_info *info = container_of(work, struct axp288_chrg_info, cable.work); int ret, current_limit; - bool changed = false; struct extcon_dev *edev = info->cable.edev; bool old_connected = info->cable.connected; + enum power_supply_type old_chg_type = info->cable.chg_type; /* Determine cable/charger type */ - if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_SDP) > 0) { + if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) { dev_dbg(&info->pdev->dev, "USB SDP charger is connected"); info->cable.connected = true; info->cable.chg_type = POWER_SUPPLY_TYPE_USB; - } else if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_CDP) > 0) { + } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) { dev_dbg(&info->pdev->dev, "USB CDP charger is connected"); info->cable.connected = true; info->cable.chg_type = POWER_SUPPLY_TYPE_USB_CDP; - } else if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_DCP) > 0) { + } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) { dev_dbg(&info->pdev->dev, "USB DCP charger is connected"); info->cable.connected = true; info->cable.chg_type = POWER_SUPPLY_TYPE_USB_DCP; @@ -601,22 +587,15 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work) } /* Cable status changed */ - if (old_connected != info->cable.connected) - changed = true; - - if (!changed) + if (old_connected == info->cable.connected && + old_chg_type == info->cable.chg_type) return; mutex_lock(&info->lock); - if (info->is_charger_enabled && !info->cable.connected) { - info->enable_charger = false; - ret = axp288_charger_enable_charger(info, info->enable_charger); - if (ret < 0) - dev_err(&info->pdev->dev, - "cannot disable charger (%d)", ret); + if (info->cable.connected) { + axp288_charger_enable_charger(info, false); - } else if (!info->is_charger_enabled && info->cable.connected) { switch (info->cable.chg_type) { case POWER_SUPPLY_TYPE_USB: current_limit = ILIM_500MA; @@ -635,36 +614,49 @@ static void axp288_charger_extcon_evt_worker(struct work_struct *work) /* Set vbus current limit first, then enable charger */ ret = axp288_charger_set_vbus_inlmt(info, current_limit); - if (ret < 0) { + if (ret == 0) + axp288_charger_enable_charger(info, true); + else dev_err(&info->pdev->dev, "error setting current limit (%d)", ret); - } else { - info->enable_charger = (current_limit > 0); - ret = axp288_charger_enable_charger(info, - info->enable_charger); - if (ret < 0) - dev_err(&info->pdev->dev, - "cannot enable charger (%d)", ret); - } + } else { + axp288_charger_enable_charger(info, false); } - if (changed) - info->health = axp288_get_charger_health(info); - mutex_unlock(&info->lock); - if (changed) - power_supply_changed(info->psy_usb); + power_supply_changed(info->psy_usb); } -static int axp288_charger_handle_cable_evt(struct notifier_block *nb, - unsigned long event, void *param) +/* + * We need 3 copies of this, because there is no way to find out for which + * cable id we are being called from the passed in arguments; and we must + * have a separate nb for each extcon_register_notifier call. + */ +static int axp288_charger_handle_cable0_evt(struct notifier_block *nb, + unsigned long event, void *param) { struct axp288_chrg_info *info = - container_of(nb, struct axp288_chrg_info, cable.nb); + container_of(nb, struct axp288_chrg_info, cable.nb[0]); + schedule_work(&info->cable.work); + return NOTIFY_OK; +} +static int axp288_charger_handle_cable1_evt(struct notifier_block *nb, + unsigned long event, void *param) +{ + struct axp288_chrg_info *info = + container_of(nb, struct axp288_chrg_info, cable.nb[1]); schedule_work(&info->cable.work); + return NOTIFY_OK; +} +static int axp288_charger_handle_cable2_evt(struct notifier_block *nb, + unsigned long event, void *param) +{ + struct axp288_chrg_info *info = + container_of(nb, struct axp288_chrg_info, cable.nb[2]); + schedule_work(&info->cable.work); return NOTIFY_OK; } @@ -672,7 +664,17 @@ static void axp288_charger_otg_evt_worker(struct work_struct *work) { struct axp288_chrg_info *info = container_of(work, struct axp288_chrg_info, otg.work); - int ret; + struct extcon_dev *edev = info->otg.cable; + int ret, usb_host = extcon_get_state(edev, EXTCON_USB_HOST); + + dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n", + usb_host ? "attached" : "detached"); + + /* + * Set usb_id_short flag to avoid running charger detection logic + * in case usb host. + */ + info->otg.id_short = usb_host; /* Disable VBUS path before enabling the 5V boost */ ret = axp288_charger_vbus_path_select(info, !info->otg.id_short); @@ -685,135 +687,109 @@ static int axp288_charger_handle_otg_evt(struct notifier_block *nb, { struct axp288_chrg_info *info = container_of(nb, struct axp288_chrg_info, otg.id_nb); - struct extcon_dev *edev = info->otg.cable; - int usb_host = extcon_get_cable_state_(edev, EXTCON_USB_HOST); - dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n", - usb_host ? "attached" : "detached"); - - /* - * Set usb_id_short flag to avoid running charger detection logic - * in case usb host. - */ - info->otg.id_short = usb_host; schedule_work(&info->otg.work); return NOTIFY_OK; } -static void charger_init_hw_regs(struct axp288_chrg_info *info) +static int charger_init_hw_regs(struct axp288_chrg_info *info) { int ret, cc, cv; unsigned int val; /* Program temperature thresholds */ ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C); - if (ret < 0) - dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n", + if (ret < 0) { + dev_err(&info->pdev->dev, "register(%x) write error(%d)\n", AXP20X_V_LTF_CHRG, ret); + return ret; + } ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C); - if (ret < 0) - dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n", + if (ret < 0) { + dev_err(&info->pdev->dev, "register(%x) write error(%d)\n", AXP20X_V_HTF_CHRG, ret); + return ret; + } /* Do not turn-off charger o/p after charge cycle ends */ ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL2, - CNTL2_CHG_OUT_TURNON, 1); - if (ret < 0) - dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n", + CNTL2_CHG_OUT_TURNON, CNTL2_CHG_OUT_TURNON); + if (ret < 0) { + dev_err(&info->pdev->dev, "register(%x) write error(%d)\n", AXP20X_CHRG_CTRL2, ret); - - /* Enable interrupts */ - ret = regmap_update_bits(info->regmap, - AXP20X_IRQ2_EN, - BAT_IRQ_CFG_BAT_MASK, 1); - if (ret < 0) - dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n", - AXP20X_IRQ2_EN, ret); - - ret = regmap_update_bits(info->regmap, AXP20X_IRQ3_EN, - TEMP_IRQ_CFG_MASK, 1); - if (ret < 0) - dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n", - AXP20X_IRQ3_EN, ret); + return ret; + } /* Setup ending condition for charging to be 10% of I(chrg) */ ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1, CHRG_CCCV_ITERM_20P, 0); - if (ret < 0) - dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n", + if (ret < 0) { + dev_err(&info->pdev->dev, "register(%x) write error(%d)\n", AXP20X_CHRG_CTRL1, ret); + return ret; + } /* Disable OCV-SOC curve calibration */ ret = regmap_update_bits(info->regmap, AXP20X_CC_CTRL, FG_CNTL_OCV_ADJ_EN, 0); - if (ret < 0) - dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n", + if (ret < 0) { + dev_err(&info->pdev->dev, "register(%x) write error(%d)\n", AXP20X_CC_CTRL, ret); - - /* Init charging current and voltage */ - info->max_cc = info->pdata->max_cc; - info->max_cv = info->pdata->max_cv; + return ret; + } /* Read current charge voltage and current limit */ ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val); if (ret < 0) { - /* Assume default if cannot read */ - info->cc = info->pdata->def_cc; - info->cv = info->pdata->def_cv; - } else { - /* Determine charge voltage */ - cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS; - switch (cv) { - case CHRG_CCCV_CV_4100MV: - info->cv = CV_4100MV; - break; - case CHRG_CCCV_CV_4150MV: - info->cv = CV_4150MV; - break; - case CHRG_CCCV_CV_4200MV: - info->cv = CV_4200MV; - break; - case CHRG_CCCV_CV_4350MV: - info->cv = CV_4350MV; - break; - default: - info->cv = INT_MAX; - break; - } + dev_err(&info->pdev->dev, "register(%x) read error(%d)\n", + AXP20X_CHRG_CTRL1, ret); + return ret; + } - /* Determine charge current limit */ - cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS; - cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET; - info->cc = cc; + /* Determine charge voltage */ + cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS; + switch (cv) { + case CHRG_CCCV_CV_4100MV: + info->cv = CV_4100MV; + break; + case CHRG_CCCV_CV_4150MV: + info->cv = CV_4150MV; + break; + case CHRG_CCCV_CV_4200MV: + info->cv = CV_4200MV; + break; + case CHRG_CCCV_CV_4350MV: + info->cv = CV_4350MV; + break; + } - /* Program default charging voltage and current */ - cc = min(info->pdata->def_cc, info->max_cc); - cv = min(info->pdata->def_cv, info->max_cv); + /* Determine charge current limit */ + cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS; + cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET; + info->cc = cc; - ret = axp288_charger_set_cc(info, cc); - if (ret < 0) - dev_warn(&info->pdev->dev, - "error(%d) in setting CC\n", ret); + /* + * Do not allow the user to configure higher settings then those + * set by the firmware + */ + info->max_cv = info->cv; + info->max_cc = info->cc; - ret = axp288_charger_set_cv(info, cv); - if (ret < 0) - dev_warn(&info->pdev->dev, - "error(%d) in setting CV\n", ret); - } + return 0; } static int axp288_charger_probe(struct platform_device *pdev) { int ret, i, pirq; struct axp288_chrg_info *info; + struct device *dev = &pdev->dev; struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); struct power_supply_config charger_cfg = {}; - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; @@ -821,15 +797,8 @@ static int axp288_charger_probe(struct platform_device *pdev) info->pdev = pdev; info->regmap = axp20x->regmap; info->regmap_irqc = axp20x->regmap_irqc; - info->pdata = pdev->dev.platform_data; - - if (!info->pdata) { - /* Try ACPI provided pdata via device properties */ - if (!device_property_present(&pdev->dev, - "axp288_charger_data\n")) - dev_err(&pdev->dev, "failed to get platform data\n"); - return -ENODEV; - } + info->cable.chg_type = -1; + info->is_charger_enabled = -1; info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME); if (info->cable.edev == NULL) { @@ -838,63 +807,55 @@ static int axp288_charger_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - /* Register for extcon notification */ - INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker); - info->cable.nb.notifier_call = axp288_charger_handle_cable_evt; - ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_SDP, - &info->cable.nb); - if (ret) { - dev_err(&info->pdev->dev, - "failed to register extcon notifier for SDP %d\n", ret); - return ret; - } - - ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_CDP, - &info->cable.nb); - if (ret) { - dev_err(&info->pdev->dev, - "failed to register extcon notifier for CDP %d\n", ret); - extcon_unregister_notifier(info->cable.edev, - EXTCON_CHG_USB_SDP, &info->cable.nb); - return ret; - } - - ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_DCP, - &info->cable.nb); - if (ret) { - dev_err(&info->pdev->dev, - "failed to register extcon notifier for DCP %d\n", ret); - extcon_unregister_notifier(info->cable.edev, - EXTCON_CHG_USB_SDP, &info->cable.nb); - extcon_unregister_notifier(info->cable.edev, - EXTCON_CHG_USB_CDP, &info->cable.nb); - return ret; + info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_DEV_NAME); + if (info->otg.cable == NULL) { + dev_dbg(dev, "EXTCON_USB_HOST is not ready, probe deferred\n"); + return -EPROBE_DEFER; } platform_set_drvdata(pdev, info); mutex_init(&info->lock); + ret = charger_init_hw_regs(info); + if (ret) + return ret; + /* Register with power supply class */ charger_cfg.drv_data = info; - info->psy_usb = power_supply_register(&pdev->dev, &axp288_charger_desc, - &charger_cfg); + info->psy_usb = devm_power_supply_register(dev, &axp288_charger_desc, + &charger_cfg); if (IS_ERR(info->psy_usb)) { - dev_err(&pdev->dev, "failed to register power supply charger\n"); ret = PTR_ERR(info->psy_usb); - goto psy_reg_failed; + dev_err(dev, "failed to register power supply: %d\n", ret); + return ret; + } + + /* Register for extcon notification */ + INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker); + info->cable.nb[0].notifier_call = axp288_charger_handle_cable0_evt; + info->cable.nb[1].notifier_call = axp288_charger_handle_cable1_evt; + info->cable.nb[2].notifier_call = axp288_charger_handle_cable2_evt; + for (i = 0; i < ARRAY_SIZE(cable_ids); i++) { + ret = devm_extcon_register_notifier(dev, info->cable.edev, + cable_ids[i], &info->cable.nb[i]); + if (ret) { + dev_err(dev, "failed to register extcon notifier for %u: %d\n", + cable_ids[i], ret); + return ret; + } } + schedule_work(&info->cable.work); /* Register for OTG notification */ INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker); info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt; - ret = extcon_register_notifier(info->otg.cable, EXTCON_USB_HOST, - &info->otg.id_nb); - if (ret) - dev_warn(&pdev->dev, "failed to register otg notifier\n"); - - if (info->otg.cable) - info->otg.id_short = extcon_get_cable_state_( - info->otg.cable, EXTCON_USB_HOST); + ret = devm_extcon_register_notifier(&pdev->dev, info->otg.cable, + EXTCON_USB_HOST, &info->otg.id_nb); + if (ret) { + dev_err(dev, "failed to register EXTCON_USB_HOST notifier\n"); + return ret; + } + schedule_work(&info->otg.work); /* Register charger interrupts */ for (i = 0; i < CHRG_INTR_END; i++) { @@ -903,8 +864,7 @@ static int axp288_charger_probe(struct platform_device *pdev) if (info->irq[i] < 0) { dev_warn(&info->pdev->dev, "failed to get virtual interrupt=%d\n", pirq); - ret = info->irq[i]; - goto intr_reg_failed; + return info->irq[i]; } ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i], NULL, axp288_charger_irq_thread_handler, @@ -912,51 +872,22 @@ static int axp288_charger_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "failed to request interrupt=%d\n", info->irq[i]); - goto intr_reg_failed; + return ret; } } - charger_init_hw_regs(info); - return 0; - -intr_reg_failed: - if (info->otg.cable) - extcon_unregister_notifier(info->otg.cable, EXTCON_USB_HOST, - &info->otg.id_nb); - power_supply_unregister(info->psy_usb); -psy_reg_failed: - extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_SDP, - &info->cable.nb); - extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_CDP, - &info->cable.nb); - extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_DCP, - &info->cable.nb); - return ret; } -static int axp288_charger_remove(struct platform_device *pdev) -{ - struct axp288_chrg_info *info = dev_get_drvdata(&pdev->dev); - - if (info->otg.cable) - extcon_unregister_notifier(info->otg.cable, EXTCON_USB_HOST, - &info->otg.id_nb); - - extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_SDP, - &info->cable.nb); - extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_CDP, - &info->cable.nb); - extcon_unregister_notifier(info->cable.edev, EXTCON_CHG_USB_DCP, - &info->cable.nb); - power_supply_unregister(info->psy_usb); - - return 0; -} +static const struct platform_device_id axp288_charger_id_table[] = { + { .name = "axp288_charger" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, axp288_charger_id_table); static struct platform_driver axp288_charger_driver = { .probe = axp288_charger_probe, - .remove = axp288_charger_remove, + .id_table = axp288_charger_id_table, .driver = { .name = "axp288_charger", }, diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c index 539eb41504bb..a8dcabc32721 100644 --- a/drivers/power/supply/axp288_fuel_gauge.c +++ b/drivers/power/supply/axp288_fuel_gauge.c @@ -29,6 +29,7 @@ #include <linux/iio/consumer.h> #include <linux/debugfs.h> #include <linux/seq_file.h> +#include <asm/unaligned.h> #define CHRG_STAT_BAT_SAFE_MODE (1 << 3) #define CHRG_STAT_BAT_VALID (1 << 4) @@ -49,23 +50,6 @@ #define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */ #define CHRG_CCCV_CHG_EN (1 << 7) -#define CV_4100 4100 /* 4100mV */ -#define CV_4150 4150 /* 4150mV */ -#define CV_4200 4200 /* 4200mV */ -#define CV_4350 4350 /* 4350mV */ - -#define TEMP_IRQ_CFG_QWBTU (1 << 0) -#define TEMP_IRQ_CFG_WBTU (1 << 1) -#define TEMP_IRQ_CFG_QWBTO (1 << 2) -#define TEMP_IRQ_CFG_WBTO (1 << 3) -#define TEMP_IRQ_CFG_MASK 0xf - -#define FG_IRQ_CFG_LOWBATT_WL2 (1 << 0) -#define FG_IRQ_CFG_LOWBATT_WL1 (1 << 1) -#define FG_IRQ_CFG_LOWBATT_MASK 0x3 -#define LOWBAT_IRQ_STAT_LOWBATT_WL2 (1 << 0) -#define LOWBAT_IRQ_STAT_LOWBATT_WL1 (1 << 1) - #define FG_CNTL_OCV_ADJ_STAT (1 << 2) #define FG_CNTL_OCV_ADJ_EN (1 << 3) #define FG_CNTL_CAP_ADJ_STAT (1 << 4) @@ -73,17 +57,15 @@ #define FG_CNTL_CC_EN (1 << 6) #define FG_CNTL_GAUGE_EN (1 << 7) +#define FG_15BIT_WORD_VALID (1 << 15) +#define FG_15BIT_VAL_MASK 0x7fff + #define FG_REP_CAP_VALID (1 << 7) #define FG_REP_CAP_VAL_MASK 0x7F #define FG_DES_CAP1_VALID (1 << 7) -#define FG_DES_CAP1_VAL_MASK 0x7F -#define FG_DES_CAP0_VAL_MASK 0xFF #define FG_DES_CAP_RES_LSB 1456 /* 1.456mAhr */ -#define FG_CC_MTR1_VALID (1 << 7) -#define FG_CC_MTR1_VAL_MASK 0x7F -#define FG_CC_MTR0_VAL_MASK 0xFF #define FG_DES_CC_RES_LSB 1456 /* 1.456mAhr */ #define FG_OCV_CAP_VALID (1 << 7) @@ -104,9 +86,7 @@ /* 1.1mV per LSB expressed in uV */ #define VOLTAGE_FROM_ADC(a) ((a * 11) / 10) -/* properties converted to tenths of degrees, uV, uA, uW */ -#define PROP_TEMP(a) ((a) * 10) -#define UNPROP_TEMP(a) ((a) / 10) +/* properties converted to uV, uA */ #define PROP_VOLT(a) ((a) * 1000) #define PROP_CURR(a) ((a) * 1000) @@ -122,13 +102,13 @@ enum { struct axp288_fg_info { struct platform_device *pdev; - struct axp20x_fg_pdata *pdata; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; int irq[AXP288_FG_INTR_NUM]; struct power_supply *bat; struct mutex lock; int status; + int max_volt; struct delayed_work status_monitor; struct dentry *debug_file; }; @@ -138,22 +118,14 @@ static enum power_supply_property fuel_gauge_props[] = { POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, - POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_VOLTAGE_OCV, POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, - POWER_SUPPLY_PROP_TEMP, - POWER_SUPPLY_PROP_TEMP_MAX, - POWER_SUPPLY_PROP_TEMP_MIN, - POWER_SUPPLY_PROP_TEMP_ALERT_MIN, - POWER_SUPPLY_PROP_TEMP_ALERT_MAX, POWER_SUPPLY_PROP_TECHNOLOGY, POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_NOW, - POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, - POWER_SUPPLY_PROP_MODEL_NAME, }; static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg) @@ -169,8 +141,10 @@ static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg) break; } - if (ret < 0) + if (ret < 0) { dev_err(&info->pdev->dev, "axp288 reg read err:%d\n", ret); + return ret; + } return val; } @@ -187,6 +161,44 @@ static int fuel_gauge_reg_writeb(struct axp288_fg_info *info, int reg, u8 val) return ret; } +static int fuel_gauge_read_15bit_word(struct axp288_fg_info *info, int reg) +{ + unsigned char buf[2]; + int ret; + + ret = regmap_bulk_read(info->regmap, reg, buf, 2); + if (ret < 0) { + dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", + reg, ret); + return ret; + } + + ret = get_unaligned_be16(buf); + if (!(ret & FG_15BIT_WORD_VALID)) { + dev_err(&info->pdev->dev, "Error reg 0x%02x contents not valid\n", + reg); + return -ENXIO; + } + + return ret & FG_15BIT_VAL_MASK; +} + +static int fuel_gauge_read_12bit_word(struct axp288_fg_info *info, int reg) +{ + unsigned char buf[2]; + int ret; + + ret = regmap_bulk_read(info->regmap, reg, buf, 2); + if (ret < 0) { + dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", + reg, ret); + return ret; + } + + /* 12-bit data values have upper 8 bits in buf[0], lower 4 in buf[1] */ + return (buf[0] << 4) | ((buf[1] >> 4) & 0x0f); +} + static int pmic_read_adc_val(const char *name, int *raw_val, struct axp288_fg_info *info) { @@ -247,24 +259,15 @@ static int fuel_gauge_debug_show(struct seq_file *s, void *data) seq_printf(s, " FG_RDC0[%02x] : %02x\n", AXP288_FG_RDC0_REG, fuel_gauge_reg_readb(info, AXP288_FG_RDC0_REG)); - seq_printf(s, " FG_OCVH[%02x] : %02x\n", + seq_printf(s, " FG_OCV[%02x] : %04x\n", AXP288_FG_OCVH_REG, - fuel_gauge_reg_readb(info, AXP288_FG_OCVH_REG)); - seq_printf(s, " FG_OCVL[%02x] : %02x\n", - AXP288_FG_OCVL_REG, - fuel_gauge_reg_readb(info, AXP288_FG_OCVL_REG)); - seq_printf(s, "FG_DES_CAP1[%02x] : %02x\n", + fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG)); + seq_printf(s, " FG_DES_CAP[%02x] : %04x\n", AXP288_FG_DES_CAP1_REG, - fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG)); - seq_printf(s, "FG_DES_CAP0[%02x] : %02x\n", - AXP288_FG_DES_CAP0_REG, - fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP0_REG)); - seq_printf(s, " FG_CC_MTR1[%02x] : %02x\n", + fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG)); + seq_printf(s, " FG_CC_MTR[%02x] : %04x\n", AXP288_FG_CC_MTR1_REG, - fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR1_REG)); - seq_printf(s, " FG_CC_MTR0[%02x] : %02x\n", - AXP288_FG_CC_MTR0_REG, - fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR0_REG)); + fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG)); seq_printf(s, " FG_OCV_CAP[%02x] : %02x\n", AXP288_FG_OCV_CAP_REG, fuel_gauge_reg_readb(info, AXP288_FG_OCV_CAP_REG)); @@ -417,143 +420,27 @@ current_read_fail: return ret; } -static int temp_to_adc(struct axp288_fg_info *info, int tval) -{ - int rntc = 0, i, ret, adc_val; - int rmin, rmax, tmin, tmax; - int tcsz = info->pdata->tcsz; - - /* get the Rntc resitance value for this temp */ - if (tval > info->pdata->thermistor_curve[0][1]) { - rntc = info->pdata->thermistor_curve[0][0]; - } else if (tval <= info->pdata->thermistor_curve[tcsz-1][1]) { - rntc = info->pdata->thermistor_curve[tcsz-1][0]; - } else { - for (i = 1; i < tcsz; i++) { - if (tval > info->pdata->thermistor_curve[i][1]) { - rmin = info->pdata->thermistor_curve[i-1][0]; - rmax = info->pdata->thermistor_curve[i][0]; - tmin = info->pdata->thermistor_curve[i-1][1]; - tmax = info->pdata->thermistor_curve[i][1]; - rntc = rmin + ((rmax - rmin) * - (tval - tmin) / (tmax - tmin)); - break; - } - } - } - - /* we need the current to calculate the proper adc voltage */ - ret = fuel_gauge_reg_readb(info, AXP20X_ADC_RATE); - if (ret < 0) { - dev_err(&info->pdev->dev, "%s:read err:%d\n", __func__, ret); - ret = 0x30; - } - - /* - * temperature is proportional to NTS thermistor resistance - * ADC_RATE[5-4] determines current, 00=20uA,01=40uA,10=60uA,11=80uA - * [12-bit ADC VAL] = R_NTC(Ω) * current / 800 - */ - adc_val = rntc * (20 + (20 * ((ret >> 4) & 0x3))) / 800; - - return adc_val; -} - -static int adc_to_temp(struct axp288_fg_info *info, int adc_val) -{ - int ret, r, i, tval = 0; - int rmin, rmax, tmin, tmax; - int tcsz = info->pdata->tcsz; - - ret = fuel_gauge_reg_readb(info, AXP20X_ADC_RATE); - if (ret < 0) { - dev_err(&info->pdev->dev, "%s:read err:%d\n", __func__, ret); - ret = 0x30; - } - - /* - * temperature is proportional to NTS thermistor resistance - * ADC_RATE[5-4] determines current, 00=20uA,01=40uA,10=60uA,11=80uA - * R_NTC(Ω) = [12-bit ADC VAL] * 800 / current - */ - r = adc_val * 800 / (20 + (20 * ((ret >> 4) & 0x3))); - - if (r < info->pdata->thermistor_curve[0][0]) { - tval = info->pdata->thermistor_curve[0][1]; - } else if (r >= info->pdata->thermistor_curve[tcsz-1][0]) { - tval = info->pdata->thermistor_curve[tcsz-1][1]; - } else { - for (i = 1; i < tcsz; i++) { - if (r < info->pdata->thermistor_curve[i][0]) { - rmin = info->pdata->thermistor_curve[i-1][0]; - rmax = info->pdata->thermistor_curve[i][0]; - tmin = info->pdata->thermistor_curve[i-1][1]; - tmax = info->pdata->thermistor_curve[i][1]; - tval = tmin + ((tmax - tmin) * - (r - rmin) / (rmax - rmin)); - break; - } - } - } - - return tval; -} - -static int fuel_gauge_get_btemp(struct axp288_fg_info *info, int *btemp) -{ - int ret, raw_val = 0; - - ret = pmic_read_adc_val("axp288-batt-temp", &raw_val, info); - if (ret < 0) - goto temp_read_fail; - - *btemp = adc_to_temp(info, raw_val); - -temp_read_fail: - return ret; -} - static int fuel_gauge_get_vocv(struct axp288_fg_info *info, int *vocv) { - int ret, value; - - /* 12-bit data value, upper 8 in OCVH, lower 4 in OCVL */ - ret = fuel_gauge_reg_readb(info, AXP288_FG_OCVH_REG); - if (ret < 0) - goto vocv_read_fail; - value = ret << 4; + int ret; - ret = fuel_gauge_reg_readb(info, AXP288_FG_OCVL_REG); - if (ret < 0) - goto vocv_read_fail; - value |= (ret & 0xf); + ret = fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG); + if (ret >= 0) + *vocv = VOLTAGE_FROM_ADC(ret); - *vocv = VOLTAGE_FROM_ADC(value); -vocv_read_fail: return ret; } static int fuel_gauge_battery_health(struct axp288_fg_info *info) { - int temp, vocv; - int ret, health = POWER_SUPPLY_HEALTH_UNKNOWN; - - ret = fuel_gauge_get_btemp(info, &temp); - if (ret < 0) - goto health_read_fail; + int ret, vocv, health = POWER_SUPPLY_HEALTH_UNKNOWN; ret = fuel_gauge_get_vocv(info, &vocv); if (ret < 0) goto health_read_fail; - if (vocv > info->pdata->max_volt) + if (vocv > info->max_volt) health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - else if (temp > info->pdata->max_temp) - health = POWER_SUPPLY_HEALTH_OVERHEAT; - else if (temp < info->pdata->min_temp) - health = POWER_SUPPLY_HEALTH_COLD; - else if (vocv < info->pdata->min_volt) - health = POWER_SUPPLY_HEALTH_DEAD; else health = POWER_SUPPLY_HEALTH_GOOD; @@ -561,28 +448,6 @@ health_read_fail: return health; } -static int fuel_gauge_set_high_btemp_alert(struct axp288_fg_info *info) -{ - int ret, adc_val; - - /* program temperature threshold as 1/16 ADC value */ - adc_val = temp_to_adc(info, info->pdata->max_temp); - ret = fuel_gauge_reg_writeb(info, AXP20X_V_HTF_DISCHRG, adc_val >> 4); - - return ret; -} - -static int fuel_gauge_set_low_btemp_alert(struct axp288_fg_info *info) -{ - int ret, adc_val; - - /* program temperature threshold as 1/16 ADC value */ - adc_val = temp_to_adc(info, info->pdata->min_temp); - ret = fuel_gauge_reg_writeb(info, AXP20X_V_LTF_DISCHRG, adc_val >> 4); - - return ret; -} - static int fuel_gauge_get_property(struct power_supply *ps, enum power_supply_property prop, union power_supply_propval *val) @@ -643,58 +508,25 @@ static int fuel_gauge_get_property(struct power_supply *ps, goto fuel_gauge_read_err; val->intval = (ret & 0x0f); break; - case POWER_SUPPLY_PROP_TEMP: - ret = fuel_gauge_get_btemp(info, &value); - if (ret < 0) - goto fuel_gauge_read_err; - val->intval = PROP_TEMP(value); - break; - case POWER_SUPPLY_PROP_TEMP_MAX: - case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: - val->intval = PROP_TEMP(info->pdata->max_temp); - break; - case POWER_SUPPLY_PROP_TEMP_MIN: - case POWER_SUPPLY_PROP_TEMP_ALERT_MIN: - val->intval = PROP_TEMP(info->pdata->min_temp); - break; case POWER_SUPPLY_PROP_TECHNOLOGY: val->intval = POWER_SUPPLY_TECHNOLOGY_LION; break; case POWER_SUPPLY_PROP_CHARGE_NOW: - ret = fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR1_REG); + ret = fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG); if (ret < 0) goto fuel_gauge_read_err; - value = (ret & FG_CC_MTR1_VAL_MASK) << 8; - ret = fuel_gauge_reg_readb(info, AXP288_FG_CC_MTR0_REG); - if (ret < 0) - goto fuel_gauge_read_err; - value |= (ret & FG_CC_MTR0_VAL_MASK); - val->intval = value * FG_DES_CAP_RES_LSB; + val->intval = ret * FG_DES_CAP_RES_LSB; break; case POWER_SUPPLY_PROP_CHARGE_FULL: - ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG); + ret = fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG); if (ret < 0) goto fuel_gauge_read_err; - value = (ret & FG_DES_CAP1_VAL_MASK) << 8; - ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP0_REG); - if (ret < 0) - goto fuel_gauge_read_err; - value |= (ret & FG_DES_CAP0_VAL_MASK); - val->intval = value * FG_DES_CAP_RES_LSB; - break; - case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: - val->intval = PROP_CURR(info->pdata->design_cap); + val->intval = ret * FG_DES_CAP_RES_LSB; break; case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: - val->intval = PROP_VOLT(info->pdata->max_volt); - break; - case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: - val->intval = PROP_VOLT(info->pdata->min_volt); - break; - case POWER_SUPPLY_PROP_MODEL_NAME: - val->strval = info->pdata->battid; + val->intval = PROP_VOLT(info->max_volt); break; default: mutex_unlock(&info->lock); @@ -718,35 +550,6 @@ static int fuel_gauge_set_property(struct power_supply *ps, mutex_lock(&info->lock); switch (prop) { - case POWER_SUPPLY_PROP_STATUS: - info->status = val->intval; - break; - case POWER_SUPPLY_PROP_TEMP_MIN: - case POWER_SUPPLY_PROP_TEMP_ALERT_MIN: - if ((val->intval < PD_DEF_MIN_TEMP) || - (val->intval > PD_DEF_MAX_TEMP)) { - ret = -EINVAL; - break; - } - info->pdata->min_temp = UNPROP_TEMP(val->intval); - ret = fuel_gauge_set_low_btemp_alert(info); - if (ret < 0) - dev_err(&info->pdev->dev, - "temp alert min set fail:%d\n", ret); - break; - case POWER_SUPPLY_PROP_TEMP_MAX: - case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: - if ((val->intval < PD_DEF_MIN_TEMP) || - (val->intval > PD_DEF_MAX_TEMP)) { - ret = -EINVAL; - break; - } - info->pdata->max_temp = UNPROP_TEMP(val->intval); - ret = fuel_gauge_set_high_btemp_alert(info); - if (ret < 0) - dev_err(&info->pdev->dev, - "temp alert max set fail:%d\n", ret); - break; case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN: if ((val->intval < 0) || (val->intval > 15)) { ret = -EINVAL; @@ -774,11 +577,6 @@ static int fuel_gauge_property_is_writeable(struct power_supply *psy, int ret; switch (psp) { - case POWER_SUPPLY_PROP_STATUS: - case POWER_SUPPLY_PROP_TEMP_MIN: - case POWER_SUPPLY_PROP_TEMP_ALERT_MIN: - case POWER_SUPPLY_PROP_TEMP_MAX: - case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN: ret = 1; break; @@ -863,158 +661,6 @@ static const struct power_supply_desc fuel_gauge_desc = { .external_power_changed = fuel_gauge_external_power_changed, }; -static int fuel_gauge_set_lowbatt_thresholds(struct axp288_fg_info *info) -{ - int ret; - u8 reg_val; - - ret = fuel_gauge_reg_readb(info, AXP20X_FG_RES); - if (ret < 0) { - dev_err(&info->pdev->dev, "%s:read err:%d\n", __func__, ret); - return ret; - } - ret = (ret & FG_REP_CAP_VAL_MASK); - - if (ret > FG_LOW_CAP_WARN_THR) - reg_val = FG_LOW_CAP_WARN_THR; - else if (ret > FG_LOW_CAP_CRIT_THR) - reg_val = FG_LOW_CAP_CRIT_THR; - else - reg_val = FG_LOW_CAP_SHDN_THR; - - reg_val |= FG_LOW_CAP_THR1_VAL; - ret = fuel_gauge_reg_writeb(info, AXP288_FG_LOW_CAP_REG, reg_val); - if (ret < 0) - dev_err(&info->pdev->dev, "%s:write err:%d\n", __func__, ret); - - return ret; -} - -static int fuel_gauge_program_vbatt_full(struct axp288_fg_info *info) -{ - int ret; - u8 val; - - ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1); - if (ret < 0) - goto fg_prog_ocv_fail; - else - val = (ret & ~CHRG_CCCV_CV_MASK); - - switch (info->pdata->max_volt) { - case CV_4100: - val |= (CHRG_CCCV_CV_4100MV << CHRG_CCCV_CV_BIT_POS); - break; - case CV_4150: - val |= (CHRG_CCCV_CV_4150MV << CHRG_CCCV_CV_BIT_POS); - break; - case CV_4200: - val |= (CHRG_CCCV_CV_4200MV << CHRG_CCCV_CV_BIT_POS); - break; - case CV_4350: - val |= (CHRG_CCCV_CV_4350MV << CHRG_CCCV_CV_BIT_POS); - break; - default: - val |= (CHRG_CCCV_CV_4200MV << CHRG_CCCV_CV_BIT_POS); - break; - } - - ret = fuel_gauge_reg_writeb(info, AXP20X_CHRG_CTRL1, val); -fg_prog_ocv_fail: - return ret; -} - -static int fuel_gauge_program_design_cap(struct axp288_fg_info *info) -{ - int ret; - - ret = fuel_gauge_reg_writeb(info, - AXP288_FG_DES_CAP1_REG, info->pdata->cap1); - if (ret < 0) - goto fg_prog_descap_fail; - - ret = fuel_gauge_reg_writeb(info, - AXP288_FG_DES_CAP0_REG, info->pdata->cap0); - -fg_prog_descap_fail: - return ret; -} - -static int fuel_gauge_program_ocv_curve(struct axp288_fg_info *info) -{ - int ret = 0, i; - - for (i = 0; i < OCV_CURVE_SIZE; i++) { - ret = fuel_gauge_reg_writeb(info, - AXP288_FG_OCV_CURVE_REG + i, info->pdata->ocv_curve[i]); - if (ret < 0) - goto fg_prog_ocv_fail; - } - -fg_prog_ocv_fail: - return ret; -} - -static int fuel_gauge_program_rdc_vals(struct axp288_fg_info *info) -{ - int ret; - - ret = fuel_gauge_reg_writeb(info, - AXP288_FG_RDC1_REG, info->pdata->rdc1); - if (ret < 0) - goto fg_prog_ocv_fail; - - ret = fuel_gauge_reg_writeb(info, - AXP288_FG_RDC0_REG, info->pdata->rdc0); - -fg_prog_ocv_fail: - return ret; -} - -static void fuel_gauge_init_config_regs(struct axp288_fg_info *info) -{ - int ret; - - /* - * check if the config data is already - * programmed and if so just return. - */ - - ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG); - if (ret < 0) { - dev_warn(&info->pdev->dev, "CAP1 reg read err!!\n"); - } else if (!(ret & FG_DES_CAP1_VALID)) { - dev_info(&info->pdev->dev, "FG data needs to be initialized\n"); - } else { - dev_info(&info->pdev->dev, "FG data is already initialized\n"); - return; - } - - ret = fuel_gauge_program_vbatt_full(info); - if (ret < 0) - dev_err(&info->pdev->dev, "set vbatt full fail:%d\n", ret); - - ret = fuel_gauge_program_design_cap(info); - if (ret < 0) - dev_err(&info->pdev->dev, "set design cap fail:%d\n", ret); - - ret = fuel_gauge_program_rdc_vals(info); - if (ret < 0) - dev_err(&info->pdev->dev, "set rdc fail:%d\n", ret); - - ret = fuel_gauge_program_ocv_curve(info); - if (ret < 0) - dev_err(&info->pdev->dev, "set ocv curve fail:%d\n", ret); - - ret = fuel_gauge_set_lowbatt_thresholds(info); - if (ret < 0) - dev_err(&info->pdev->dev, "lowbatt thr set fail:%d\n", ret); - - ret = fuel_gauge_reg_writeb(info, AXP20X_CC_CTRL, 0xef); - if (ret < 0) - dev_err(&info->pdev->dev, "gauge cntl set fail:%d\n", ret); -} - static void fuel_gauge_init_irq(struct axp288_fg_info *info) { int ret, i, pirq; @@ -1052,29 +698,6 @@ intr_failed: } } -static void fuel_gauge_init_hw_regs(struct axp288_fg_info *info) -{ - int ret; - unsigned int val; - - ret = fuel_gauge_set_high_btemp_alert(info); - if (ret < 0) - dev_err(&info->pdev->dev, "high batt temp set fail:%d\n", ret); - - ret = fuel_gauge_set_low_btemp_alert(info); - if (ret < 0) - dev_err(&info->pdev->dev, "low batt temp set fail:%d\n", ret); - - /* enable interrupts */ - val = fuel_gauge_reg_readb(info, AXP20X_IRQ3_EN); - val |= TEMP_IRQ_CFG_MASK; - fuel_gauge_reg_writeb(info, AXP20X_IRQ3_EN, val); - - val = fuel_gauge_reg_readb(info, AXP20X_IRQ4_EN); - val |= FG_IRQ_CFG_LOWBATT_MASK; - val = fuel_gauge_reg_writeb(info, AXP20X_IRQ4_EN, val); -} - static int axp288_fuel_gauge_probe(struct platform_device *pdev) { int ret = 0; @@ -1090,15 +713,39 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev) info->regmap = axp20x->regmap; info->regmap_irqc = axp20x->regmap_irqc; info->status = POWER_SUPPLY_STATUS_UNKNOWN; - info->pdata = pdev->dev.platform_data; - if (!info->pdata) - return -ENODEV; platform_set_drvdata(pdev, info); mutex_init(&info->lock); INIT_DELAYED_WORK(&info->status_monitor, fuel_gauge_status_monitor); + ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG); + if (ret < 0) + return ret; + + if (!(ret & FG_DES_CAP1_VALID)) { + dev_err(&pdev->dev, "axp288 not configured by firmware\n"); + return -ENODEV; + } + + ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1); + if (ret < 0) + return ret; + switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) { + case CHRG_CCCV_CV_4100MV: + info->max_volt = 4100; + break; + case CHRG_CCCV_CV_4150MV: + info->max_volt = 4150; + break; + case CHRG_CCCV_CV_4200MV: + info->max_volt = 4200; + break; + case CHRG_CCCV_CV_4350MV: + info->max_volt = 4350; + break; + } + psy_cfg.drv_data = info; info->bat = power_supply_register(&pdev->dev, &fuel_gauge_desc, &psy_cfg); if (IS_ERR(info->bat)) { @@ -1108,12 +755,10 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev) } fuel_gauge_create_debugfs(info); - fuel_gauge_init_config_regs(info); fuel_gauge_init_irq(info); - fuel_gauge_init_hw_regs(info); schedule_delayed_work(&info->status_monitor, STATUS_MON_DELAY_JIFFIES); - return ret; + return 0; } static const struct platform_device_id axp288_fg_id_table[] = { diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c index 73e2f0b79dd4..c4770a94cc8e 100644 --- a/drivers/power/supply/bq2415x_charger.c +++ b/drivers/power/supply/bq2415x_charger.c @@ -1569,6 +1569,11 @@ static int bq2415x_probe(struct i2c_client *client, acpi_id = acpi_match_device(client->dev.driver->acpi_match_table, &client->dev); + if (!acpi_id) { + dev_err(&client->dev, "failed to match device name\n"); + ret = -ENODEV; + goto error_1; + } name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num); } if (!name) { diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index e9584330aeed..a4f08492abeb 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -144,10 +144,7 @@ * so the first read after a fault returns the latched value and subsequent * reads return the current value. In order to return the fault status * to the user, have the interrupt handler save the reg's value and retrieve - * it in the appropriate health/status routine. Each routine has its own - * flag indicating whether it should use the value stored by the last run - * of the interrupt handler or do an actual reg read. That way each routine - * can report back whatever fault may have occured. + * it in the appropriate health/status routine. */ struct bq24190_dev_info { struct i2c_client *client; @@ -159,10 +156,6 @@ struct bq24190_dev_info { unsigned int gpio_int; unsigned int irq; struct mutex f_reg_lock; - bool first_time; - bool charger_health_valid; - bool battery_health_valid; - bool battery_status_valid; u8 f_reg; u8 ss_reg; u8 watchdog; @@ -199,7 +192,7 @@ static const int bq24190_cvc_vreg_values[] = { 4400000 }; -/* REG06[1:0] (TREG) in tenths of degrees Celcius */ +/* REG06[1:0] (TREG) in tenths of degrees Celsius */ static const int bq24190_ictrc_treg_values[] = { 600, 800, 1000, 1200 }; @@ -636,21 +629,11 @@ static int bq24190_charger_get_health(struct bq24190_dev_info *bdi, union power_supply_propval *val) { u8 v; - int health, ret; + int health; mutex_lock(&bdi->f_reg_lock); - - if (bdi->charger_health_valid) { - v = bdi->f_reg; - bdi->charger_health_valid = false; - mutex_unlock(&bdi->f_reg_lock); - } else { - mutex_unlock(&bdi->f_reg_lock); - - ret = bq24190_read(bdi, BQ24190_REG_F, &v); - if (ret < 0) - return ret; - } + v = bdi->f_reg; + mutex_unlock(&bdi->f_reg_lock); if (v & BQ24190_REG_F_BOOST_FAULT_MASK) { /* @@ -937,18 +920,8 @@ static int bq24190_battery_get_status(struct bq24190_dev_info *bdi, int status, ret; mutex_lock(&bdi->f_reg_lock); - - if (bdi->battery_status_valid) { - chrg_fault = bdi->f_reg; - bdi->battery_status_valid = false; - mutex_unlock(&bdi->f_reg_lock); - } else { - mutex_unlock(&bdi->f_reg_lock); - - ret = bq24190_read(bdi, BQ24190_REG_F, &chrg_fault); - if (ret < 0) - return ret; - } + chrg_fault = bdi->f_reg; + mutex_unlock(&bdi->f_reg_lock); chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK; chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT; @@ -996,21 +969,11 @@ static int bq24190_battery_get_health(struct bq24190_dev_info *bdi, union power_supply_propval *val) { u8 v; - int health, ret; + int health; mutex_lock(&bdi->f_reg_lock); - - if (bdi->battery_health_valid) { - v = bdi->f_reg; - bdi->battery_health_valid = false; - mutex_unlock(&bdi->f_reg_lock); - } else { - mutex_unlock(&bdi->f_reg_lock); - - ret = bq24190_read(bdi, BQ24190_REG_F, &v); - if (ret < 0) - return ret; - } + v = bdi->f_reg; + mutex_unlock(&bdi->f_reg_lock); if (v & BQ24190_REG_F_BAT_FAULT_MASK) { health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; @@ -1197,9 +1160,12 @@ static const struct power_supply_desc bq24190_battery_desc = { static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) { struct bq24190_dev_info *bdi = data; - bool alert_userspace = false; + const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK; + const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK + | BQ24190_REG_F_NTC_FAULT_MASK; + bool alert_charger = false, alert_battery = false; u8 ss_reg = 0, f_reg = 0; - int ret; + int i, ret; pm_runtime_get_sync(bdi->dev); @@ -1209,6 +1175,32 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) goto out; } + i = 0; + do { + ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg); + if (ret < 0) { + dev_err(bdi->dev, "Can't read F reg: %d\n", ret); + goto out; + } + } while (f_reg && ++i < 2); + + if (f_reg != bdi->f_reg) { + dev_info(bdi->dev, + "Fault: boost %d, charge %d, battery %d, ntc %d\n", + !!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK), + !!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK), + !!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK), + !!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK)); + + mutex_lock(&bdi->f_reg_lock); + if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f)) + alert_battery = true; + if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f)) + alert_charger = true; + bdi->f_reg = f_reg; + mutex_unlock(&bdi->f_reg_lock); + } + if (ss_reg != bdi->ss_reg) { /* * The device is in host mode so when PG_STAT goes from 1->0 @@ -1225,47 +1217,17 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) ret); } + if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss)) + alert_battery = true; + if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss)) + alert_charger = true; bdi->ss_reg = ss_reg; - alert_userspace = true; - } - - mutex_lock(&bdi->f_reg_lock); - - ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg); - if (ret < 0) { - mutex_unlock(&bdi->f_reg_lock); - dev_err(bdi->dev, "Can't read F reg: %d\n", ret); - goto out; - } - - if (f_reg != bdi->f_reg) { - bdi->f_reg = f_reg; - bdi->charger_health_valid = true; - bdi->battery_health_valid = true; - bdi->battery_status_valid = true; - - alert_userspace = true; } - mutex_unlock(&bdi->f_reg_lock); - - /* - * Sometimes bq24190 gives a steady trickle of interrupts even - * though the watchdog timer is turned off and neither the STATUS - * nor FAULT registers have changed. Weed out these sprurious - * interrupts so userspace isn't alerted for no reason. - * In addition, the chip always generates an interrupt after - * register reset so we should ignore that one (the very first - * interrupt received). - */ - if (alert_userspace) { - if (!bdi->first_time) { - power_supply_changed(bdi->charger); - power_supply_changed(bdi->battery); - } else { - bdi->first_time = false; - } - } + if (alert_charger) + power_supply_changed(bdi->charger); + if (alert_battery) + power_supply_changed(bdi->battery); out: pm_runtime_put_sync(bdi->dev); @@ -1300,6 +1262,10 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi) goto out; ret = bq24190_set_mode_host(bdi); + if (ret < 0) + goto out; + + ret = bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); out: pm_runtime_put_sync(bdi->dev); return ret; @@ -1375,10 +1341,8 @@ static int bq24190_probe(struct i2c_client *client, bdi->model = id->driver_data; strncpy(bdi->model_name, id->name, I2C_NAME_SIZE); mutex_init(&bdi->f_reg_lock); - bdi->first_time = true; - bdi->charger_health_valid = false; - bdi->battery_health_valid = false; - bdi->battery_status_valid = false; + bdi->f_reg = 0; + bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ i2c_set_clientdata(client, bdi); @@ -1392,22 +1356,13 @@ static int bq24190_probe(struct i2c_client *client, return -EINVAL; } - ret = devm_request_threaded_irq(dev, bdi->irq, NULL, - bq24190_irq_handler_thread, - IRQF_TRIGGER_RISING | IRQF_ONESHOT, - "bq24190-charger", bdi); - if (ret < 0) { - dev_err(dev, "Can't set up irq handler\n"); - goto out1; - } - pm_runtime_enable(dev); pm_runtime_resume(dev); ret = bq24190_hw_init(bdi); if (ret < 0) { dev_err(dev, "Hardware init failed\n"); - goto out2; + goto out1; } charger_cfg.drv_data = bdi; @@ -1418,7 +1373,7 @@ static int bq24190_probe(struct i2c_client *client, if (IS_ERR(bdi->charger)) { dev_err(dev, "Can't register charger\n"); ret = PTR_ERR(bdi->charger); - goto out2; + goto out1; } battery_cfg.drv_data = bdi; @@ -1427,27 +1382,39 @@ static int bq24190_probe(struct i2c_client *client, if (IS_ERR(bdi->battery)) { dev_err(dev, "Can't register battery\n"); ret = PTR_ERR(bdi->battery); - goto out3; + goto out2; } ret = bq24190_sysfs_create_group(bdi); if (ret) { dev_err(dev, "Can't create sysfs entries\n"); + goto out3; + } + + ret = devm_request_threaded_irq(dev, bdi->irq, NULL, + bq24190_irq_handler_thread, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "bq24190-charger", bdi); + if (ret < 0) { + dev_err(dev, "Can't set up irq handler\n"); goto out4; } return 0; out4: - power_supply_unregister(bdi->battery); + bq24190_sysfs_remove_group(bdi); + out3: - power_supply_unregister(bdi->charger); + power_supply_unregister(bdi->battery); + out2: - pm_runtime_disable(dev); + power_supply_unregister(bdi->charger); + out1: + pm_runtime_disable(dev); if (bdi->gpio_int) gpio_free(bdi->gpio_int); - return ret; } @@ -1488,12 +1455,13 @@ static int bq24190_pm_resume(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct bq24190_dev_info *bdi = i2c_get_clientdata(client); - bdi->charger_health_valid = false; - bdi->battery_health_valid = false; - bdi->battery_status_valid = false; + bdi->f_reg = 0; + bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ pm_runtime_get_sync(bdi->dev); bq24190_register_reset(bdi); + bq24190_set_mode_host(bdi); + bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); pm_runtime_put_sync(bdi->dev); /* Things may have changed while suspended so alert upper layer */ diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c index eb7783b42e0a..eb0145380def 100644 --- a/drivers/power/supply/bq24735-charger.c +++ b/drivers/power/supply/bq24735-charger.c @@ -50,6 +50,8 @@ struct bq24735 { struct bq24735_platform *pdata; struct mutex lock; struct gpio_desc *status_gpio; + struct delayed_work poll; + u32 poll_interval; bool charging; }; @@ -105,26 +107,6 @@ static int bq24735_update_word(struct i2c_client *client, u8 reg, return bq24735_write_word(client, reg, tmp); } -static inline int bq24735_enable_charging(struct bq24735 *charger) -{ - if (charger->pdata->ext_control) - return 0; - - return bq24735_update_word(charger->client, BQ24735_CHG_OPT, - BQ24735_CHG_OPT_CHARGE_DISABLE, - ~BQ24735_CHG_OPT_CHARGE_DISABLE); -} - -static inline int bq24735_disable_charging(struct bq24735 *charger) -{ - if (charger->pdata->ext_control) - return 0; - - return bq24735_update_word(charger->client, BQ24735_CHG_OPT, - BQ24735_CHG_OPT_CHARGE_DISABLE, - BQ24735_CHG_OPT_CHARGE_DISABLE); -} - static int bq24735_config_charger(struct bq24735 *charger) { struct bq24735_platform *pdata = charger->pdata; @@ -176,6 +158,31 @@ static int bq24735_config_charger(struct bq24735 *charger) return 0; } +static inline int bq24735_enable_charging(struct bq24735 *charger) +{ + int ret; + + if (charger->pdata->ext_control) + return 0; + + ret = bq24735_config_charger(charger); + if (ret) + return ret; + + return bq24735_update_word(charger->client, BQ24735_CHG_OPT, + BQ24735_CHG_OPT_CHARGE_DISABLE, 0); +} + +static inline int bq24735_disable_charging(struct bq24735 *charger) +{ + if (charger->pdata->ext_control) + return 0; + + return bq24735_update_word(charger->client, BQ24735_CHG_OPT, + BQ24735_CHG_OPT_CHARGE_DISABLE, + BQ24735_CHG_OPT_CHARGE_DISABLE); +} + static bool bq24735_charger_is_present(struct bq24735 *charger) { if (charger->status_gpio) { @@ -185,7 +192,7 @@ static bool bq24735_charger_is_present(struct bq24735 *charger) ac = bq24735_read_word(charger->client, BQ24735_CHG_OPT); if (ac < 0) { - dev_err(&charger->client->dev, + dev_dbg(&charger->client->dev, "Failed to read charger options : %d\n", ac); return false; @@ -210,11 +217,8 @@ static int bq24735_charger_is_charging(struct bq24735 *charger) return !(ret & BQ24735_CHG_OPT_CHARGE_DISABLE); } -static irqreturn_t bq24735_charger_isr(int irq, void *devid) +static void bq24735_update(struct bq24735 *charger) { - struct power_supply *psy = devid; - struct bq24735 *charger = to_bq24735(psy); - mutex_lock(&charger->lock); if (charger->charging && bq24735_charger_is_present(charger)) @@ -224,11 +228,29 @@ static irqreturn_t bq24735_charger_isr(int irq, void *devid) mutex_unlock(&charger->lock); - power_supply_changed(psy); + power_supply_changed(charger->charger); +} + +static irqreturn_t bq24735_charger_isr(int irq, void *devid) +{ + struct power_supply *psy = devid; + struct bq24735 *charger = to_bq24735(psy); + + bq24735_update(charger); return IRQ_HANDLED; } +static void bq24735_poll(struct work_struct *work) +{ + struct bq24735 *charger = container_of(work, struct bq24735, poll.work); + + bq24735_update(charger); + + schedule_delayed_work(&charger->poll, + msecs_to_jiffies(charger->poll_interval)); +} + static int bq24735_charger_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -276,7 +298,6 @@ static int bq24735_charger_set_property(struct power_supply *psy, mutex_unlock(&charger->lock); if (ret) return ret; - bq24735_config_charger(charger); break; case POWER_SUPPLY_STATUS_DISCHARGING: case POWER_SUPPLY_STATUS_NOT_CHARGING: @@ -395,7 +416,7 @@ static int bq24735_charger_probe(struct i2c_client *client, return ret; } - if (!charger->status_gpio || bq24735_charger_is_present(charger)) { + if (bq24735_charger_is_present(charger)) { ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID); if (ret < 0) { dev_err(&client->dev, "Failed to read manufacturer id : %d\n", @@ -416,16 +437,7 @@ static int bq24735_charger_probe(struct i2c_client *client, "device id mismatch. 0x000b != 0x%04x\n", ret); return -ENODEV; } - } - - ret = bq24735_config_charger(charger); - if (ret < 0) { - dev_err(&client->dev, "failed in configuring charger"); - return ret; - } - /* check for AC adapter presence */ - if (bq24735_charger_is_present(charger)) { ret = bq24735_enable_charging(charger); if (ret < 0) { dev_err(&client->dev, "Failed to enable charging\n"); @@ -456,11 +468,32 @@ static int bq24735_charger_probe(struct i2c_client *client, client->irq, ret); return ret; } + } else { + ret = device_property_read_u32(&client->dev, "poll-interval", + &charger->poll_interval); + if (ret) + return 0; + if (!charger->poll_interval) + return 0; + + INIT_DELAYED_WORK(&charger->poll, bq24735_poll); + schedule_delayed_work(&charger->poll, + msecs_to_jiffies(charger->poll_interval)); } return 0; } +static int bq24735_charger_remove(struct i2c_client *client) +{ + struct bq24735 *charger = i2c_get_clientdata(client); + + if (charger->poll_interval) + cancel_delayed_work_sync(&charger->poll); + + return 0; +} + static const struct i2c_device_id bq24735_charger_id[] = { { "bq24735-charger", 0 }, {} @@ -479,6 +512,7 @@ static struct i2c_driver bq24735_charger_driver = { .of_match_table = bq24735_match_ids, }, .probe = bq24735_charger_probe, + .remove = bq24735_charger_remove, .id_table = bq24735_charger_id, }; diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c index 08c36b8e04bd..398801a21b86 100644 --- a/drivers/power/supply/bq27xxx_battery.c +++ b/drivers/power/supply/bq27xxx_battery.c @@ -22,8 +22,14 @@ * http://www.ti.com/product/bq27010 * http://www.ti.com/product/bq27210 * http://www.ti.com/product/bq27500 + * http://www.ti.com/product/bq27510-g1 + * http://www.ti.com/product/bq27510-g2 * http://www.ti.com/product/bq27510-g3 * http://www.ti.com/product/bq27520-g4 + * http://www.ti.com/product/bq27520-g1 + * http://www.ti.com/product/bq27520-g2 + * http://www.ti.com/product/bq27520-g3 + * http://www.ti.com/product/bq27520-g4 * http://www.ti.com/product/bq27530-g1 * http://www.ti.com/product/bq27531-g1 * http://www.ti.com/product/bq27541-g1 @@ -145,7 +151,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = { [BQ27XXX_REG_DCAP] = 0x76, [BQ27XXX_REG_AP] = INVALID_REG_ADDR, }, - [BQ27500] = { + [BQ2750X] = { [BQ27XXX_REG_CTRL] = 0x00, [BQ27XXX_REG_TEMP] = 0x06, [BQ27XXX_REG_INT_TEMP] = 0x28, @@ -164,7 +170,83 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = { [BQ27XXX_REG_DCAP] = 0x3c, [BQ27XXX_REG_AP] = INVALID_REG_ADDR, }, - [BQ27510] = { + [BQ2751X] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = 0x28, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = INVALID_REG_ADDR, + [BQ27XXX_REG_TTES] = 0x1a, + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x1e, + [BQ27XXX_REG_AE] = INVALID_REG_ADDR, + [BQ27XXX_REG_SOC] = 0x20, + [BQ27XXX_REG_DCAP] = 0x2e, + [BQ27XXX_REG_AP] = INVALID_REG_ADDR, + }, + [BQ27500] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = 0x18, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = 0x26, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x2a, + [BQ27XXX_REG_AE] = 0x22, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x24, + }, + [BQ27510G1] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = 0x18, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = 0x26, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x2a, + [BQ27XXX_REG_AE] = 0x22, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x24, + }, + [BQ27510G2] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = 0x18, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = 0x26, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x2a, + [BQ27XXX_REG_AE] = 0x22, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x24, + }, + [BQ27510G3] = { [BQ27XXX_REG_CTRL] = 0x00, [BQ27XXX_REG_TEMP] = 0x06, [BQ27XXX_REG_INT_TEMP] = 0x28, @@ -183,6 +265,82 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = { [BQ27XXX_REG_DCAP] = 0x2e, [BQ27XXX_REG_AP] = INVALID_REG_ADDR, }, + [BQ27520G1] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = 0x18, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = 0x26, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = INVALID_REG_ADDR, + [BQ27XXX_REG_AE] = 0x22, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x24, + }, + [BQ27520G2] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = 0x36, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = 0x18, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = 0x26, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x2a, + [BQ27XXX_REG_AE] = 0x22, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x24, + }, + [BQ27520G3] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = 0x36, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = INVALID_REG_ADDR, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = 0x26, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x2a, + [BQ27XXX_REG_AE] = 0x22, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x24, + }, + [BQ27520G4] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = 0x28, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = INVALID_REG_ADDR, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, + [BQ27XXX_REG_NAC] = 0x0c, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x1e, + [BQ27XXX_REG_AE] = INVALID_REG_ADDR, + [BQ27XXX_REG_SOC] = 0x20, + [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR, + [BQ27XXX_REG_AP] = INVALID_REG_ADDR, + }, [BQ27530] = { [BQ27XXX_REG_CTRL] = 0x00, [BQ27XXX_REG_TEMP] = 0x06, @@ -303,6 +461,42 @@ static enum power_supply_property bq27010_battery_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; +static enum power_supply_property bq2750x_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq2751x_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + static enum power_supply_property bq27500_battery_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_PRESENT, @@ -312,6 +506,69 @@ static enum power_supply_property bq27500_battery_props[] = { POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27510g1_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27510g2_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27510g3_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, POWER_SUPPLY_PROP_TECHNOLOGY, POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_NOW, @@ -321,7 +578,27 @@ static enum power_supply_property bq27500_battery_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; -static enum power_supply_property bq27510_battery_props[] = { +static enum power_supply_property bq27520g1_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27520g2_battery_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_VOLTAGE_NOW, @@ -330,11 +607,51 @@ static enum power_supply_property bq27510_battery_props[] = { POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, POWER_SUPPLY_PROP_TECHNOLOGY, POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27520g3_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27520g4_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_MANUFACTURER, }; @@ -421,8 +738,16 @@ static struct { } bq27xxx_battery_props[] = { BQ27XXX_PROP(BQ27000, bq27000_battery_props), BQ27XXX_PROP(BQ27010, bq27010_battery_props), + BQ27XXX_PROP(BQ2750X, bq2750x_battery_props), + BQ27XXX_PROP(BQ2751X, bq2751x_battery_props), BQ27XXX_PROP(BQ27500, bq27500_battery_props), - BQ27XXX_PROP(BQ27510, bq27510_battery_props), + BQ27XXX_PROP(BQ27510G1, bq27510g1_battery_props), + BQ27XXX_PROP(BQ27510G2, bq27510g2_battery_props), + BQ27XXX_PROP(BQ27510G3, bq27510g3_battery_props), + BQ27XXX_PROP(BQ27520G1, bq27520g1_battery_props), + BQ27XXX_PROP(BQ27520G2, bq27520g2_battery_props), + BQ27XXX_PROP(BQ27520G3, bq27520g3_battery_props), + BQ27XXX_PROP(BQ27520G4, bq27520g4_battery_props), BQ27XXX_PROP(BQ27530, bq27530_battery_props), BQ27XXX_PROP(BQ27541, bq27541_battery_props), BQ27XXX_PROP(BQ27545, bq27545_battery_props), @@ -674,13 +999,26 @@ static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di) */ static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags) { - if (di->chip == BQ27500 || di->chip == BQ27510 || - di->chip == BQ27541 || di->chip == BQ27545) + switch (di->chip) { + case BQ2750X: + case BQ2751X: + case BQ27500: + case BQ27510G1: + case BQ27510G2: + case BQ27510G3: + case BQ27520G1: + case BQ27520G2: + case BQ27520G3: + case BQ27520G4: + case BQ27541: + case BQ27545: return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD); - if (di->chip == BQ27530 || di->chip == BQ27421) + case BQ27530: + case BQ27421: return flags & BQ27XXX_FLAG_OT; - - return false; + default: + return false; + } } /* diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c index 5c5c3a6f9923..c68fbc3fe50a 100644 --- a/drivers/power/supply/bq27xxx_battery_i2c.c +++ b/drivers/power/supply/bq27xxx_battery_i2c.c @@ -148,9 +148,17 @@ static int bq27xxx_battery_i2c_remove(struct i2c_client *client) static const struct i2c_device_id bq27xxx_i2c_id_table[] = { { "bq27200", BQ27000 }, { "bq27210", BQ27010 }, - { "bq27500", BQ27500 }, - { "bq27510", BQ27510 }, - { "bq27520", BQ27510 }, + { "bq27500", BQ2750X }, + { "bq27510", BQ2751X }, + { "bq27520", BQ2751X }, + { "bq27500-1", BQ27500 }, + { "bq27510g1", BQ27510G1 }, + { "bq27510g2", BQ27510G2 }, + { "bq27510g3", BQ27510G3 }, + { "bq27520g1", BQ27520G1 }, + { "bq27520g2", BQ27520G2 }, + { "bq27520g3", BQ27520G3 }, + { "bq27520g4", BQ27520G4 }, { "bq27530", BQ27530 }, { "bq27531", BQ27530 }, { "bq27541", BQ27541 }, @@ -173,6 +181,14 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { { .compatible = "ti,bq27500" }, { .compatible = "ti,bq27510" }, { .compatible = "ti,bq27520" }, + { .compatible = "ti,bq27500-1" }, + { .compatible = "ti,bq27510g1" }, + { .compatible = "ti,bq27510g2" }, + { .compatible = "ti,bq27510g3" }, + { .compatible = "ti,bq27520g1" }, + { .compatible = "ti,bq27520g2" }, + { .compatible = "ti,bq27520g3" }, + { .compatible = "ti,bq27520g4" }, { .compatible = "ti,bq27530" }, { .compatible = "ti,bq27531" }, { .compatible = "ti,bq27541" }, diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c index c5869b1941ac..001731e88718 100644 --- a/drivers/power/supply/gpio-charger.c +++ b/drivers/power/supply/gpio-charger.c @@ -14,7 +14,7 @@ */ #include <linux/device.h> -#include <linux/gpio.h> +#include <linux/gpio.h> /* For legacy platform data */ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -23,7 +23,7 @@ #include <linux/power_supply.h> #include <linux/slab.h> #include <linux/of.h> -#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> #include <linux/power/gpio-charger.h> @@ -34,6 +34,8 @@ struct gpio_charger { struct power_supply *charger; struct power_supply_desc charger_desc; + struct gpio_desc *gpiod; + bool legacy_gpio_requested; }; static irqreturn_t gpio_charger_irq(int irq, void *devid) @@ -58,7 +60,8 @@ static int gpio_charger_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_ONLINE: - val->intval = !!gpio_get_value_cansleep(pdata->gpio); + val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod); + /* This xor is only ever used with legacy pdata GPIO */ val->intval ^= pdata->gpio_active_low; break; default: @@ -78,7 +81,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev) struct device_node *np = dev->of_node; struct gpio_charger_platform_data *pdata; const char *chargetype; - enum of_gpio_flags flags; int ret; if (!np) @@ -89,16 +91,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); pdata->name = np->name; - - pdata->gpio = of_get_gpio_flags(np, 0, &flags); - if (pdata->gpio < 0) { - if (pdata->gpio != -EPROBE_DEFER) - dev_err(dev, "could not get charger gpio\n"); - return ERR_PTR(pdata->gpio); - } - - pdata->gpio_active_low = !!(flags & OF_GPIO_ACTIVE_LOW); - pdata->type = POWER_SUPPLY_TYPE_UNKNOWN; ret = of_property_read_string(np, "charger-type", &chargetype); if (ret >= 0) { @@ -144,11 +136,6 @@ static int gpio_charger_probe(struct platform_device *pdev) } } - if (!gpio_is_valid(pdata->gpio)) { - dev_err(&pdev->dev, "Invalid gpio pin\n"); - return -EINVAL; - } - gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger), GFP_KERNEL); if (!gpio_charger) { @@ -156,6 +143,45 @@ static int gpio_charger_probe(struct platform_device *pdev) return -ENOMEM; } + /* + * This will fetch a GPIO descriptor from device tree, ACPI or + * boardfile descriptor tables. It's good to try this first. + */ + gpio_charger->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN); + + /* + * If this fails and we're not using device tree, try the + * legacy platform data method. + */ + if (IS_ERR(gpio_charger->gpiod) && !pdev->dev.of_node) { + /* Non-DT: use legacy GPIO numbers */ + if (!gpio_is_valid(pdata->gpio)) { + dev_err(&pdev->dev, "Invalid gpio pin in pdata\n"); + return -EINVAL; + } + ret = gpio_request(pdata->gpio, dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", + ret); + return ret; + } + gpio_charger->legacy_gpio_requested = true; + ret = gpio_direction_input(pdata->gpio); + if (ret) { + dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", + ret); + goto err_gpio_free; + } + /* Then convert this to gpiod for now */ + gpio_charger->gpiod = gpio_to_desc(pdata->gpio); + } else if (IS_ERR(gpio_charger->gpiod)) { + /* Just try again if this happens */ + if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(&pdev->dev, "error getting GPIO descriptor\n"); + return PTR_ERR(gpio_charger->gpiod); + } + charger_desc = &gpio_charger->charger_desc; charger_desc->name = pdata->name ? pdata->name : "gpio-charger"; @@ -169,17 +195,6 @@ static int gpio_charger_probe(struct platform_device *pdev) psy_cfg.of_node = pdev->dev.of_node; psy_cfg.drv_data = gpio_charger; - ret = gpio_request(pdata->gpio, dev_name(&pdev->dev)); - if (ret) { - dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", ret); - goto err_free; - } - ret = gpio_direction_input(pdata->gpio); - if (ret) { - dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", ret); - goto err_gpio_free; - } - gpio_charger->pdata = pdata; gpio_charger->charger = power_supply_register(&pdev->dev, @@ -191,7 +206,7 @@ static int gpio_charger_probe(struct platform_device *pdev) goto err_gpio_free; } - irq = gpio_to_irq(pdata->gpio); + irq = gpiod_to_irq(gpio_charger->gpiod); if (irq > 0) { ret = request_any_context_irq(irq, gpio_charger_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, @@ -209,8 +224,8 @@ static int gpio_charger_probe(struct platform_device *pdev) return 0; err_gpio_free: - gpio_free(pdata->gpio); -err_free: + if (gpio_charger->legacy_gpio_requested) + gpio_free(pdata->gpio); return ret; } @@ -223,7 +238,8 @@ static int gpio_charger_remove(struct platform_device *pdev) power_supply_unregister(gpio_charger->charger); - gpio_free(gpio_charger->pdata->gpio); + if (gpio_charger->legacy_gpio_requested) + gpio_free(gpio_charger->pdata->gpio); return 0; } diff --git a/drivers/power/supply/intel_mid_battery.c b/drivers/power/supply/intel_mid_battery.c deleted file mode 100644 index dc7feef1bea4..000000000000 --- a/drivers/power/supply/intel_mid_battery.c +++ /dev/null @@ -1,795 +0,0 @@ -/* - * intel_mid_battery.c - Intel MID PMIC Battery Driver - * - * Copyright (C) 2009 Intel Corporation - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * Author: Nithish Mahalingam <nithish.mahalingam@intel.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/workqueue.h> -#include <linux/jiffies.h> -#include <linux/param.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/platform_device.h> -#include <linux/power_supply.h> - -#include <asm/intel_scu_ipc.h> - -#define DRIVER_NAME "pmic_battery" - -/********************************************************************* - * Generic defines - *********************************************************************/ - -static int debug; -module_param(debug, int, 0444); -MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages."); - -#define PMIC_BATT_DRV_INFO_UPDATED 1 -#define PMIC_BATT_PRESENT 1 -#define PMIC_BATT_NOT_PRESENT 0 -#define PMIC_USB_PRESENT PMIC_BATT_PRESENT -#define PMIC_USB_NOT_PRESENT PMIC_BATT_NOT_PRESENT - -/* pmic battery register related */ -#define PMIC_BATT_CHR_SCHRGINT_ADDR 0xD2 -#define PMIC_BATT_CHR_SBATOVP_MASK (1 << 1) -#define PMIC_BATT_CHR_STEMP_MASK (1 << 2) -#define PMIC_BATT_CHR_SCOMP_MASK (1 << 3) -#define PMIC_BATT_CHR_SUSBDET_MASK (1 << 4) -#define PMIC_BATT_CHR_SBATDET_MASK (1 << 5) -#define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6) -#define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7) -#define PMIC_BATT_CHR_EXCPT_MASK 0x86 - -#define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31) -#define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF - -/* pmic ipc related */ -#define PMIC_BATT_CHR_IPC_FCHRG_SUBID 0x4 -#define PMIC_BATT_CHR_IPC_TCHRG_SUBID 0x6 - -/* types of battery charging */ -enum batt_charge_type { - BATT_USBOTG_500MA_CHARGE, - BATT_USBOTG_TRICKLE_CHARGE, -}; - -/* valid battery events */ -enum batt_event { - BATT_EVENT_BATOVP_EXCPT, - BATT_EVENT_USBOVP_EXCPT, - BATT_EVENT_TEMP_EXCPT, - BATT_EVENT_DCLMT_EXCPT, - BATT_EVENT_EXCPT -}; - - -/********************************************************************* - * Battery properties - *********************************************************************/ - -/* - * pmic battery info - */ -struct pmic_power_module_info { - bool is_dev_info_updated; - struct device *dev; - /* pmic battery data */ - unsigned long update_time; /* jiffies when data read */ - unsigned int usb_is_present; - unsigned int batt_is_present; - unsigned int batt_health; - unsigned int usb_health; - unsigned int batt_status; - unsigned int batt_charge_now; /* in mAS */ - unsigned int batt_prev_charge_full; /* in mAS */ - unsigned int batt_charge_rate; /* in units per second */ - - struct power_supply *usb; - struct power_supply *batt; - int irq; /* GPE_ID or IRQ# */ - struct workqueue_struct *monitor_wqueue; - struct delayed_work monitor_battery; - struct work_struct handler; -}; - -static unsigned int delay_time = 2000; /* in ms */ - -/* - * pmic ac properties - */ -static enum power_supply_property pmic_usb_props[] = { - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_HEALTH, -}; - -/* - * pmic battery properties - */ -static enum power_supply_property pmic_battery_props[] = { - POWER_SUPPLY_PROP_STATUS, - POWER_SUPPLY_PROP_HEALTH, - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_CHARGE_NOW, - POWER_SUPPLY_PROP_CHARGE_FULL, -}; - - -/* - * Glue functions for talking to the IPC - */ - -struct battery_property { - u32 capacity; /* Charger capacity */ - u8 crnt; /* Quick charge current value*/ - u8 volt; /* Fine adjustment of constant charge voltage */ - u8 prot; /* CHRGPROT register value */ - u8 prot2; /* CHRGPROT1 register value */ - u8 timer; /* Charging timer */ -}; - -#define IPCMSG_BATTERY 0xEF - -/* Battery coulomb counter accumulator commands */ -#define IPC_CMD_CC_WR 0 /* Update coulomb counter value */ -#define IPC_CMD_CC_RD 1 /* Read coulomb counter value */ -#define IPC_CMD_BATTERY_PROPERTY 2 /* Read Battery property */ - -/** - * pmic_scu_ipc_battery_cc_read - read battery cc - * @value: battery coulomb counter read - * - * Reads the battery couloumb counter value, returns 0 on success, or - * an error code - * - * This function may sleep. Locking for SCU accesses is handled for - * the caller. - */ -static int pmic_scu_ipc_battery_cc_read(u32 *value) -{ - return intel_scu_ipc_command(IPCMSG_BATTERY, IPC_CMD_CC_RD, - NULL, 0, value, 1); -} - -/** - * pmic_scu_ipc_battery_property_get - fetch properties - * @prop: battery properties - * - * Retrieve the battery properties from the power management - * - * This function may sleep. Locking for SCU accesses is handled for - * the caller. - */ -static int pmic_scu_ipc_battery_property_get(struct battery_property *prop) -{ - u32 data[3]; - u8 *p = (u8 *)&data[1]; - int err = intel_scu_ipc_command(IPCMSG_BATTERY, - IPC_CMD_BATTERY_PROPERTY, NULL, 0, data, 3); - - prop->capacity = data[0]; - prop->crnt = *p++; - prop->volt = *p++; - prop->prot = *p++; - prop->prot2 = *p++; - prop->timer = *p++; - - return err; -} - -/** - * pmic_scu_ipc_set_charger - set charger - * @charger: charger to select - * - * Switch the charging mode for the SCU - */ - -static int pmic_scu_ipc_set_charger(int charger) -{ - return intel_scu_ipc_simple_command(IPCMSG_BATTERY, charger); -} - -/** - * pmic_battery_log_event - log battery events - * @event: battery event to be logged - * Context: can sleep - * - * There are multiple battery events which may be of interest to users; - * this battery function logs the different battery events onto the - * kernel log messages. - */ -static void pmic_battery_log_event(enum batt_event event) -{ - printk(KERN_WARNING "pmic-battery: "); - switch (event) { - case BATT_EVENT_BATOVP_EXCPT: - printk(KERN_CONT "battery overvoltage condition\n"); - break; - case BATT_EVENT_USBOVP_EXCPT: - printk(KERN_CONT "usb charger overvoltage condition\n"); - break; - case BATT_EVENT_TEMP_EXCPT: - printk(KERN_CONT "high battery temperature condition\n"); - break; - case BATT_EVENT_DCLMT_EXCPT: - printk(KERN_CONT "over battery charge current condition\n"); - break; - default: - printk(KERN_CONT "charger/battery exception %d\n", event); - break; - } -} - -/** - * pmic_battery_read_status - read battery status information - * @pbi: device info structure to update the read information - * Context: can sleep - * - * PMIC power source information need to be updated based on the data read - * from the PMIC battery registers. - * - */ -static void pmic_battery_read_status(struct pmic_power_module_info *pbi) -{ - unsigned int update_time_intrvl; - unsigned int chrg_val; - u32 ccval; - u8 r8; - struct battery_property batt_prop; - int batt_present = 0; - int usb_present = 0; - int batt_exception = 0; - - /* make sure the last batt_status read happened delay_time before */ - if (pbi->update_time && time_before(jiffies, pbi->update_time + - msecs_to_jiffies(delay_time))) - return; - - update_time_intrvl = jiffies_to_msecs(jiffies - pbi->update_time); - pbi->update_time = jiffies; - - /* read coulomb counter registers and schrgint register */ - if (pmic_scu_ipc_battery_cc_read(&ccval)) { - dev_warn(pbi->dev, "%s(): ipc config cmd failed\n", - __func__); - return; - } - - if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) { - dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", - __func__); - return; - } - - /* - * set pmic_power_module_info members based on pmic register values - * read. - */ - - /* set batt_is_present */ - if (r8 & PMIC_BATT_CHR_SBATDET_MASK) { - pbi->batt_is_present = PMIC_BATT_PRESENT; - batt_present = 1; - } else { - pbi->batt_is_present = PMIC_BATT_NOT_PRESENT; - pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN; - pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN; - } - - /* set batt_health */ - if (batt_present) { - if (r8 & PMIC_BATT_CHR_SBATOVP_MASK) { - pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; - pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT); - batt_exception = 1; - } else if (r8 & PMIC_BATT_CHR_STEMP_MASK) { - pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT; - pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; - pmic_battery_log_event(BATT_EVENT_TEMP_EXCPT); - batt_exception = 1; - } else { - pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD; - if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { - /* PMIC will change charging current automatically */ - pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); - } - } - } - - /* set usb_is_present */ - if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) { - pbi->usb_is_present = PMIC_USB_PRESENT; - usb_present = 1; - } else { - pbi->usb_is_present = PMIC_USB_NOT_PRESENT; - pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN; - } - - if (usb_present) { - if (r8 & PMIC_BATT_CHR_SUSBOVP_MASK) { - pbi->usb_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - pmic_battery_log_event(BATT_EVENT_USBOVP_EXCPT); - } else { - pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD; - } - } - - chrg_val = ccval & PMIC_BATT_ADC_ACCCHRGVAL_MASK; - - /* set batt_prev_charge_full to battery capacity the first time */ - if (!pbi->is_dev_info_updated) { - if (pmic_scu_ipc_battery_property_get(&batt_prop)) { - dev_warn(pbi->dev, "%s(): ipc config cmd failed\n", - __func__); - return; - } - pbi->batt_prev_charge_full = batt_prop.capacity; - } - - /* set batt_status */ - if (batt_present && !batt_exception) { - if (r8 & PMIC_BATT_CHR_SCOMP_MASK) { - pbi->batt_status = POWER_SUPPLY_STATUS_FULL; - pbi->batt_prev_charge_full = chrg_val; - } else if (ccval & PMIC_BATT_ADC_ACCCHRG_MASK) { - pbi->batt_status = POWER_SUPPLY_STATUS_DISCHARGING; - } else { - pbi->batt_status = POWER_SUPPLY_STATUS_CHARGING; - } - } - - /* set batt_charge_rate */ - if (pbi->is_dev_info_updated && batt_present && !batt_exception) { - if (pbi->batt_status == POWER_SUPPLY_STATUS_DISCHARGING) { - if (pbi->batt_charge_now - chrg_val) { - pbi->batt_charge_rate = ((pbi->batt_charge_now - - chrg_val) * 1000 * 60) / - update_time_intrvl; - } - } else if (pbi->batt_status == POWER_SUPPLY_STATUS_CHARGING) { - if (chrg_val - pbi->batt_charge_now) { - pbi->batt_charge_rate = ((chrg_val - - pbi->batt_charge_now) * 1000 * 60) / - update_time_intrvl; - } - } else - pbi->batt_charge_rate = 0; - } else { - pbi->batt_charge_rate = -1; - } - - /* batt_charge_now */ - if (batt_present && !batt_exception) - pbi->batt_charge_now = chrg_val; - else - pbi->batt_charge_now = -1; - - pbi->is_dev_info_updated = PMIC_BATT_DRV_INFO_UPDATED; -} - -/** - * pmic_usb_get_property - usb power source get property - * @psy: usb power supply context - * @psp: usb power source property - * @val: usb power source property value - * Context: can sleep - * - * PMIC usb power source property needs to be provided to power_supply - * subsytem for it to provide the information to users. - */ -static int pmic_usb_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct pmic_power_module_info *pbi = power_supply_get_drvdata(psy); - - /* update pmic_power_module_info members */ - pmic_battery_read_status(pbi); - - switch (psp) { - case POWER_SUPPLY_PROP_PRESENT: - val->intval = pbi->usb_is_present; - break; - case POWER_SUPPLY_PROP_HEALTH: - val->intval = pbi->usb_health; - break; - default: - return -EINVAL; - } - - return 0; -} - -static inline unsigned long mAStouAh(unsigned long v) -{ - /* seconds to hours, mA to µA */ - return (v * 1000) / 3600; -} - -/** - * pmic_battery_get_property - battery power source get property - * @psy: battery power supply context - * @psp: battery power source property - * @val: battery power source property value - * Context: can sleep - * - * PMIC battery power source property needs to be provided to power_supply - * subsytem for it to provide the information to users. - */ -static int pmic_battery_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct pmic_power_module_info *pbi = power_supply_get_drvdata(psy); - - /* update pmic_power_module_info members */ - pmic_battery_read_status(pbi); - - switch (psp) { - case POWER_SUPPLY_PROP_STATUS: - val->intval = pbi->batt_status; - break; - case POWER_SUPPLY_PROP_HEALTH: - val->intval = pbi->batt_health; - break; - case POWER_SUPPLY_PROP_PRESENT: - val->intval = pbi->batt_is_present; - break; - case POWER_SUPPLY_PROP_CHARGE_NOW: - val->intval = mAStouAh(pbi->batt_charge_now); - break; - case POWER_SUPPLY_PROP_CHARGE_FULL: - val->intval = mAStouAh(pbi->batt_prev_charge_full); - break; - default: - return -EINVAL; - } - - return 0; -} - -/** - * pmic_battery_monitor - monitor battery status - * @work: work structure - * Context: can sleep - * - * PMIC battery status needs to be monitored for any change - * and information needs to be frequently updated. - */ -static void pmic_battery_monitor(struct work_struct *work) -{ - struct pmic_power_module_info *pbi = container_of(work, - struct pmic_power_module_info, monitor_battery.work); - - /* update pmic_power_module_info members */ - pmic_battery_read_status(pbi); - queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 10); -} - -/** - * pmic_battery_set_charger - set battery charger - * @pbi: device info structure - * @chrg: charge mode to set battery charger in - * Context: can sleep - * - * PMIC battery charger needs to be enabled based on the usb charge - * capabilities connected to the platform. - */ -static int pmic_battery_set_charger(struct pmic_power_module_info *pbi, - enum batt_charge_type chrg) -{ - int retval; - - /* set usblmt bits and chrgcntl register bits appropriately */ - switch (chrg) { - case BATT_USBOTG_500MA_CHARGE: - retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_FCHRG_SUBID); - break; - case BATT_USBOTG_TRICKLE_CHARGE: - retval = pmic_scu_ipc_set_charger(PMIC_BATT_CHR_IPC_TCHRG_SUBID); - break; - default: - dev_warn(pbi->dev, "%s(): out of range usb charger " - "charge detected\n", __func__); - return -EINVAL; - } - - if (retval) { - dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", - __func__); - return retval; - } - - return 0; -} - -/** - * pmic_battery_interrupt_handler - pmic battery interrupt handler - * Context: interrupt context - * - * PMIC battery interrupt handler which will be called with either - * battery full condition occurs or usb otg & battery connect - * condition occurs. - */ -static irqreturn_t pmic_battery_interrupt_handler(int id, void *dev) -{ - struct pmic_power_module_info *pbi = dev; - - schedule_work(&pbi->handler); - - return IRQ_HANDLED; -} - -/** - * pmic_battery_handle_intrpt - pmic battery service interrupt - * @work: work structure - * Context: can sleep - * - * PMIC battery needs to either update the battery status as full - * if it detects battery full condition caused the interrupt or needs - * to enable battery charger if it detects usb and battery detect - * caused the source of interrupt. - */ -static void pmic_battery_handle_intrpt(struct work_struct *work) -{ - struct pmic_power_module_info *pbi = container_of(work, - struct pmic_power_module_info, handler); - enum batt_charge_type chrg; - u8 r8; - - if (intel_scu_ipc_ioread8(PMIC_BATT_CHR_SCHRGINT_ADDR, &r8)) { - dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", - __func__); - return; - } - /* find the cause of the interrupt */ - if (r8 & PMIC_BATT_CHR_SBATDET_MASK) { - pbi->batt_is_present = PMIC_BATT_PRESENT; - } else { - pbi->batt_is_present = PMIC_BATT_NOT_PRESENT; - pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN; - pbi->batt_status = POWER_SUPPLY_STATUS_UNKNOWN; - return; - } - - if (r8 & PMIC_BATT_CHR_EXCPT_MASK) { - pbi->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN; - pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; - pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN; - pmic_battery_log_event(BATT_EVENT_EXCPT); - return; - } else { - pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD; - pbi->usb_health = POWER_SUPPLY_HEALTH_GOOD; - } - - if (r8 & PMIC_BATT_CHR_SCOMP_MASK) { - u32 ccval; - pbi->batt_status = POWER_SUPPLY_STATUS_FULL; - - if (pmic_scu_ipc_battery_cc_read(&ccval)) { - dev_warn(pbi->dev, "%s(): ipc config cmd " - "failed\n", __func__); - return; - } - pbi->batt_prev_charge_full = ccval & - PMIC_BATT_ADC_ACCCHRGVAL_MASK; - return; - } - - if (r8 & PMIC_BATT_CHR_SUSBDET_MASK) { - pbi->usb_is_present = PMIC_USB_PRESENT; - } else { - pbi->usb_is_present = PMIC_USB_NOT_PRESENT; - pbi->usb_health = POWER_SUPPLY_HEALTH_UNKNOWN; - return; - } - - /* setup battery charging */ - -#if 0 - /* check usb otg power capability and set charger accordingly */ - retval = langwell_udc_maxpower(&power); - if (retval) { - dev_warn(pbi->dev, - "%s(): usb otg power query failed with error code %d\n", - __func__, retval); - return; - } - - if (power >= 500) - chrg = BATT_USBOTG_500MA_CHARGE; - else -#endif - chrg = BATT_USBOTG_TRICKLE_CHARGE; - - /* enable battery charging */ - if (pmic_battery_set_charger(pbi, chrg)) { - dev_warn(pbi->dev, - "%s(): failed to set up battery charging\n", __func__); - return; - } - - dev_dbg(pbi->dev, - "pmic-battery: %s() - setting up battery charger successful\n", - __func__); -} - -/* - * Description of power supplies - */ -static const struct power_supply_desc pmic_usb_desc = { - .name = "pmic-usb", - .type = POWER_SUPPLY_TYPE_USB, - .properties = pmic_usb_props, - .num_properties = ARRAY_SIZE(pmic_usb_props), - .get_property = pmic_usb_get_property, -}; - -static const struct power_supply_desc pmic_batt_desc = { - .name = "pmic-batt", - .type = POWER_SUPPLY_TYPE_BATTERY, - .properties = pmic_battery_props, - .num_properties = ARRAY_SIZE(pmic_battery_props), - .get_property = pmic_battery_get_property, -}; - -/** - * pmic_battery_probe - pmic battery initialize - * @irq: pmic battery device irq - * @dev: pmic battery device structure - * Context: can sleep - * - * PMIC battery initializes its internal data structue and other - * infrastructure components for it to work as expected. - */ -static int probe(int irq, struct device *dev) -{ - int retval = 0; - struct pmic_power_module_info *pbi; - struct power_supply_config psy_cfg = {}; - - dev_dbg(dev, "pmic-battery: found pmic battery device\n"); - - pbi = kzalloc(sizeof(*pbi), GFP_KERNEL); - if (!pbi) { - dev_err(dev, "%s(): memory allocation failed\n", - __func__); - return -ENOMEM; - } - - pbi->dev = dev; - pbi->irq = irq; - dev_set_drvdata(dev, pbi); - psy_cfg.drv_data = pbi; - - /* initialize all required framework before enabling interrupts */ - INIT_WORK(&pbi->handler, pmic_battery_handle_intrpt); - INIT_DELAYED_WORK(&pbi->monitor_battery, pmic_battery_monitor); - pbi->monitor_wqueue = alloc_workqueue(dev_name(dev), WQ_MEM_RECLAIM, 0); - if (!pbi->monitor_wqueue) { - dev_err(dev, "%s(): wqueue init failed\n", __func__); - retval = -ESRCH; - goto wqueue_failed; - } - - /* register interrupt */ - retval = request_irq(pbi->irq, pmic_battery_interrupt_handler, - 0, DRIVER_NAME, pbi); - if (retval) { - dev_err(dev, "%s(): cannot get IRQ\n", __func__); - goto requestirq_failed; - } - - /* register pmic-batt with power supply subsystem */ - pbi->batt = power_supply_register(dev, &pmic_usb_desc, &psy_cfg); - if (IS_ERR(pbi->batt)) { - dev_err(dev, - "%s(): failed to register pmic battery device with power supply subsystem\n", - __func__); - retval = PTR_ERR(pbi->batt); - goto power_reg_failed; - } - - dev_dbg(dev, "pmic-battery: %s() - pmic battery device " - "registration with power supply subsystem successful\n", - __func__); - - queue_delayed_work(pbi->monitor_wqueue, &pbi->monitor_battery, HZ * 1); - - /* register pmic-usb with power supply subsystem */ - pbi->usb = power_supply_register(dev, &pmic_batt_desc, &psy_cfg); - if (IS_ERR(pbi->usb)) { - dev_err(dev, - "%s(): failed to register pmic usb device with power supply subsystem\n", - __func__); - retval = PTR_ERR(pbi->usb); - goto power_reg_failed_1; - } - - if (debug) - printk(KERN_INFO "pmic-battery: %s() - pmic usb device " - "registration with power supply subsystem successful\n", - __func__); - - return retval; - -power_reg_failed_1: - power_supply_unregister(pbi->batt); -power_reg_failed: - cancel_delayed_work_sync(&pbi->monitor_battery); -requestirq_failed: - destroy_workqueue(pbi->monitor_wqueue); -wqueue_failed: - kfree(pbi); - - return retval; -} - -static int platform_pmic_battery_probe(struct platform_device *pdev) -{ - return probe(pdev->id, &pdev->dev); -} - -/** - * pmic_battery_remove - pmic battery finalize - * @dev: pmic battery device structure - * Context: can sleep - * - * PMIC battery finalizes its internal data structue and other - * infrastructure components that it initialized in - * pmic_battery_probe. - */ - -static int platform_pmic_battery_remove(struct platform_device *pdev) -{ - struct pmic_power_module_info *pbi = platform_get_drvdata(pdev); - - free_irq(pbi->irq, pbi); - cancel_delayed_work_sync(&pbi->monitor_battery); - destroy_workqueue(pbi->monitor_wqueue); - - power_supply_unregister(pbi->usb); - power_supply_unregister(pbi->batt); - - cancel_work_sync(&pbi->handler); - kfree(pbi); - return 0; -} - -static struct platform_driver platform_pmic_battery_driver = { - .driver = { - .name = DRIVER_NAME, - }, - .probe = platform_pmic_battery_probe, - .remove = platform_pmic_battery_remove, -}; - -module_platform_driver(platform_pmic_battery_driver); - -MODULE_AUTHOR("Nithish Mahalingam <nithish.mahalingam@intel.com>"); -MODULE_DESCRIPTION("Intel Moorestown PMIC Battery Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c new file mode 100644 index 000000000000..b91b1d2999dc --- /dev/null +++ b/drivers/power/supply/max14656_charger_detector.c @@ -0,0 +1,327 @@ +/* + * Maxim MAX14656 / AL32 USB Charger Detector driver + * + * Copyright (C) 2014 LG Electronics, Inc + * Copyright (C) 2016 Alexander Kurz <akurz@blala.de> + * + * Components from Maxim AL32 Charger detection Driver for MX50 Yoshi Board + * Copyright (C) Amazon Technologies Inc. All rights reserved. + * Manish Lachwani (lachwani@lab126.com) + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> +#include <linux/workqueue.h> +#include <linux/power_supply.h> + +#define MAX14656_MANUFACTURER "Maxim Integrated" +#define MAX14656_NAME "max14656" + +#define MAX14656_DEVICE_ID 0x00 +#define MAX14656_INTERRUPT_1 0x01 +#define MAX14656_INTERRUPT_2 0x02 +#define MAX14656_STATUS_1 0x03 +#define MAX14656_STATUS_2 0x04 +#define MAX14656_INTMASK_1 0x05 +#define MAX14656_INTMASK_2 0x06 +#define MAX14656_CONTROL_1 0x07 +#define MAX14656_CONTROL_2 0x08 +#define MAX14656_CONTROL_3 0x09 + +#define DEVICE_VENDOR_MASK 0xf0 +#define DEVICE_REV_MASK 0x0f +#define INT_EN_REG_MASK BIT(4) +#define CHG_TYPE_INT_MASK BIT(0) +#define STATUS1_VB_VALID_MASK BIT(4) +#define STATUS1_CHG_TYPE_MASK 0xf +#define INT1_DCD_TIMEOUT_MASK BIT(7) +#define CONTROL1_DEFAULT 0x0d +#define CONTROL1_INT_EN BIT(4) +#define CONTROL1_INT_ACTIVE_HIGH BIT(5) +#define CONTROL1_EDGE BIT(7) +#define CONTROL2_DEFAULT 0x8e +#define CONTROL2_ADC_EN BIT(0) +#define CONTROL3_DEFAULT 0x8d + +enum max14656_chg_type { + MAX14656_NO_CHARGER = 0, + MAX14656_SDP_CHARGER, + MAX14656_CDP_CHARGER, + MAX14656_DCP_CHARGER, + MAX14656_APPLE_500MA_CHARGER, + MAX14656_APPLE_1A_CHARGER, + MAX14656_APPLE_2A_CHARGER, + MAX14656_SPECIAL_500MA_CHARGER, + MAX14656_APPLE_12W, + MAX14656_CHARGER_LAST +}; + +static const struct max14656_chg_type_props { + enum power_supply_type type; +} chg_type_props[] = { + { POWER_SUPPLY_TYPE_UNKNOWN }, + { POWER_SUPPLY_TYPE_USB }, + { POWER_SUPPLY_TYPE_USB_CDP }, + { POWER_SUPPLY_TYPE_USB_DCP }, + { POWER_SUPPLY_TYPE_USB_DCP }, + { POWER_SUPPLY_TYPE_USB_DCP }, + { POWER_SUPPLY_TYPE_USB_DCP }, + { POWER_SUPPLY_TYPE_USB_DCP }, + { POWER_SUPPLY_TYPE_USB }, +}; + +struct max14656_chip { + struct i2c_client *client; + struct power_supply *detect_psy; + struct power_supply_desc psy_desc; + struct delayed_work irq_work; + + int irq; + int online; +}; + +static int max14656_read_reg(struct i2c_client *client, int reg, u8 *val) +{ + s32 ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, + "i2c read fail: can't read from %02x: %d\n", + reg, ret); + return ret; + } + *val = ret; + return 0; +} + +static int max14656_write_reg(struct i2c_client *client, int reg, u8 val) +{ + s32 ret; + + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret < 0) { + dev_err(&client->dev, + "i2c write fail: can't write %02x to %02x: %d\n", + val, reg, ret); + return ret; + } + return 0; +} + +static int max14656_read_block_reg(struct i2c_client *client, u8 reg, + u8 length, u8 *val) +{ + int ret; + + ret = i2c_smbus_read_i2c_block_data(client, reg, length, val); + if (ret < 0) { + dev_err(&client->dev, "failed to block read reg 0x%x: %d\n", + reg, ret); + return ret; + } + + return 0; +} + +#define REG_TOTAL_NUM 5 +static void max14656_irq_worker(struct work_struct *work) +{ + struct max14656_chip *chip = + container_of(work, struct max14656_chip, irq_work.work); + + u8 buf[REG_TOTAL_NUM]; + u8 chg_type; + int ret = 0; + + ret = max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID, + REG_TOTAL_NUM, buf); + + if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) && + (buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) { + chg_type = buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK; + if (chg_type < MAX14656_CHARGER_LAST) + chip->psy_desc.type = chg_type_props[chg_type].type; + else + chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN; + chip->online = 1; + } else { + chip->online = 0; + chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN; + } + + power_supply_changed(chip->detect_psy); +} + +static irqreturn_t max14656_irq(int irq, void *dev_id) +{ + struct max14656_chip *chip = dev_id; + + schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(100)); + + return IRQ_HANDLED; +} + +static int max14656_hw_init(struct max14656_chip *chip) +{ + uint8_t val = 0; + uint8_t rev; + struct i2c_client *client = chip->client; + + if (max14656_read_reg(client, MAX14656_DEVICE_ID, &val)) + return -ENODEV; + + if ((val & DEVICE_VENDOR_MASK) != 0x20) { + dev_err(&client->dev, "wrong vendor ID %d\n", + ((val & DEVICE_VENDOR_MASK) >> 4)); + return -ENODEV; + } + rev = val & DEVICE_REV_MASK; + + /* Turn on ADC_EN */ + if (max14656_write_reg(client, MAX14656_CONTROL_2, CONTROL2_ADC_EN)) + return -EINVAL; + + /* turn on interrupts and low power mode */ + if (max14656_write_reg(client, MAX14656_CONTROL_1, + CONTROL1_DEFAULT | + CONTROL1_INT_EN | + CONTROL1_INT_ACTIVE_HIGH | + CONTROL1_EDGE)) + return -EINVAL; + + if (max14656_write_reg(client, MAX14656_INTMASK_1, 0x3)) + return -EINVAL; + + if (max14656_write_reg(client, MAX14656_INTMASK_2, 0x1)) + return -EINVAL; + + dev_info(&client->dev, "detected revision %d\n", rev); + return 0; +} + +static int max14656_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max14656_chip *chip = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = chip->online; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = MAX14656_NAME; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = MAX14656_MANUFACTURER; + break; + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property max14656_battery_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static int max14656_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct device *dev = &client->dev; + struct power_supply_config psy_cfg = {}; + struct max14656_chip *chip; + int irq = client->irq; + int ret = 0; + + if (irq <= 0) { + dev_err(dev, "invalid irq number: %d\n", irq); + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(dev, "No support for SMBUS_BYTE_DATA\n"); + return -ENODEV; + } + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + psy_cfg.drv_data = chip; + chip->client = client; + chip->online = 0; + chip->psy_desc.name = MAX14656_NAME; + chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN; + chip->psy_desc.properties = max14656_battery_props; + chip->psy_desc.num_properties = ARRAY_SIZE(max14656_battery_props); + chip->psy_desc.get_property = max14656_get_property; + chip->irq = irq; + + ret = max14656_hw_init(chip); + if (ret) + return -ENODEV; + + INIT_DELAYED_WORK(&chip->irq_work, max14656_irq_worker); + + ret = devm_request_irq(dev, chip->irq, max14656_irq, + IRQF_TRIGGER_FALLING, + MAX14656_NAME, chip); + if (ret) { + dev_err(dev, "request_irq %d failed\n", chip->irq); + return -EINVAL; + } + enable_irq_wake(chip->irq); + + chip->detect_psy = devm_power_supply_register(dev, + &chip->psy_desc, &psy_cfg); + if (IS_ERR(chip->detect_psy)) { + dev_err(dev, "power_supply_register failed\n"); + return -EINVAL; + } + + schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(2000)); + + return 0; +} + +static const struct i2c_device_id max14656_id[] = { + { "max14656", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, max14656_id); + +static const struct of_device_id max14656_match_table[] = { + { .compatible = "maxim,max14656", }, + {} +}; +MODULE_DEVICE_TABLE(of, max14656_match_table); + +static struct i2c_driver max14656_i2c_driver = { + .driver = { + .name = "max14656", + .of_match_table = max14656_match_table, + }, + .probe = max14656_probe, + .id_table = max14656_id, +}; +module_i2c_driver(max14656_i2c_driver); + +MODULE_DESCRIPTION("MAX14656 USB charger detector"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c index 290ddc12b040..fa861003fece 100644 --- a/drivers/power/supply/max8997_charger.c +++ b/drivers/power/supply/max8997_charger.c @@ -148,10 +148,8 @@ static int max8997_battery_probe(struct platform_device *pdev) charger = devm_kzalloc(&pdev->dev, sizeof(struct charger_data), GFP_KERNEL); - if (charger == NULL) { - dev_err(&pdev->dev, "Cannot allocate memory.\n"); + if (!charger) return -ENOMEM; - } platform_set_drvdata(pdev, charger); @@ -161,7 +159,7 @@ static int max8997_battery_probe(struct platform_device *pdev) psy_cfg.drv_data = charger; - charger->battery = power_supply_register(&pdev->dev, + charger->battery = devm_power_supply_register(&pdev->dev, &max8997_battery_desc, &psy_cfg); if (IS_ERR(charger->battery)) { @@ -172,14 +170,6 @@ static int max8997_battery_probe(struct platform_device *pdev) return 0; } -static int max8997_battery_remove(struct platform_device *pdev) -{ - struct charger_data *charger = platform_get_drvdata(pdev); - - power_supply_unregister(charger->battery); - return 0; -} - static const struct platform_device_id max8997_battery_id[] = { { "max8997-battery", 0 }, { } @@ -191,7 +181,6 @@ static struct platform_driver max8997_battery_driver = { .name = "max8997-battery", }, .probe = max8997_battery_probe, - .remove = max8997_battery_remove, .id_table = max8997_battery_id, }; diff --git a/drivers/power/supply/pcf50633-charger.c b/drivers/power/supply/pcf50633-charger.c index d05597b4e40f..b3c1873ad84d 100644 --- a/drivers/power/supply/pcf50633-charger.c +++ b/drivers/power/supply/pcf50633-charger.c @@ -393,7 +393,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) { struct power_supply_config psy_cfg = {}; struct pcf50633_mbc *mbc; - int ret; int i; u8 mbcs1; @@ -419,8 +418,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) &psy_cfg); if (IS_ERR(mbc->adapter)) { dev_err(mbc->pcf->dev, "failed to register adapter\n"); - ret = PTR_ERR(mbc->adapter); - return ret; + return PTR_ERR(mbc->adapter); } mbc->usb = power_supply_register(&pdev->dev, &pcf50633_mbc_usb_desc, @@ -428,8 +426,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) if (IS_ERR(mbc->usb)) { dev_err(mbc->pcf->dev, "failed to register usb\n"); power_supply_unregister(mbc->adapter); - ret = PTR_ERR(mbc->usb); - return ret; + return PTR_ERR(mbc->usb); } mbc->ac = power_supply_register(&pdev->dev, &pcf50633_mbc_ac_desc, @@ -438,12 +435,10 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) dev_err(mbc->pcf->dev, "failed to register ac\n"); power_supply_unregister(mbc->adapter); power_supply_unregister(mbc->usb); - ret = PTR_ERR(mbc->ac); - return ret; + return PTR_ERR(mbc->ac); } - ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group); - if (ret) + if (sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group)) dev_err(mbc->pcf->dev, "failed to create sysfs entries\n"); mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1); diff --git a/drivers/power/supply/qcom_smbb.c b/drivers/power/supply/qcom_smbb.c index b5896ba2a602..f6a0d245731d 100644 --- a/drivers/power/supply/qcom_smbb.c +++ b/drivers/power/supply/qcom_smbb.c @@ -35,6 +35,7 @@ #include <linux/regmap.h> #include <linux/slab.h> #include <linux/extcon.h> +#include <linux/regulator/driver.h> #define SMBB_CHG_VMAX 0x040 #define SMBB_CHG_VSAFE 0x041 @@ -72,6 +73,8 @@ #define BTC_CTRL_HOT_EXT_N BIT(0) #define SMBB_USB_IMAX 0x344 +#define SMBB_USB_OTG_CTL 0x348 +#define OTG_CTL_EN BIT(0) #define SMBB_USB_ENUM_TIMER_STOP 0x34e #define ENUM_TIMER_STOP BIT(0) #define SMBB_USB_SEC_ACCESS 0x3d0 @@ -125,6 +128,9 @@ struct smbb_charger { struct power_supply *dc_psy; struct power_supply *bat_psy; struct regmap *regmap; + + struct regulator_desc otg_rdesc; + struct regulator_dev *otg_reg; }; static const unsigned int smbb_usb_extcon_cable[] = { @@ -378,7 +384,7 @@ static irqreturn_t smbb_usb_valid_handler(int irq, void *_data) struct smbb_charger *chg = _data; smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID); - extcon_set_cable_state_(chg->edev, EXTCON_USB, + extcon_set_state_sync(chg->edev, EXTCON_USB, chg->status & STATUS_USBIN_VALID); power_supply_changed(chg->usb_psy); @@ -787,12 +793,56 @@ static const struct power_supply_desc dc_psy_desc = { .property_is_writeable = smbb_charger_writable_property, }; +static int smbb_chg_otg_enable(struct regulator_dev *rdev) +{ + struct smbb_charger *chg = rdev_get_drvdata(rdev); + int rc; + + rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, + OTG_CTL_EN, OTG_CTL_EN); + if (rc) + dev_err(chg->dev, "failed to update OTG_CTL\n"); + return rc; +} + +static int smbb_chg_otg_disable(struct regulator_dev *rdev) +{ + struct smbb_charger *chg = rdev_get_drvdata(rdev); + int rc; + + rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, + OTG_CTL_EN, 0); + if (rc) + dev_err(chg->dev, "failed to update OTG_CTL\n"); + return rc; +} + +static int smbb_chg_otg_is_enabled(struct regulator_dev *rdev) +{ + struct smbb_charger *chg = rdev_get_drvdata(rdev); + unsigned int value = 0; + int rc; + + rc = regmap_read(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, &value); + if (rc) + dev_err(chg->dev, "failed to read OTG_CTL\n"); + + return !!(value & OTG_CTL_EN); +} + +static const struct regulator_ops smbb_chg_otg_ops = { + .enable = smbb_chg_otg_enable, + .disable = smbb_chg_otg_disable, + .is_enabled = smbb_chg_otg_is_enabled, +}; + static int smbb_charger_probe(struct platform_device *pdev) { struct power_supply_config bat_cfg = {}; struct power_supply_config usb_cfg = {}; struct power_supply_config dc_cfg = {}; struct smbb_charger *chg; + struct regulator_config config = { }; int rc, i; chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL); @@ -905,6 +955,26 @@ static int smbb_charger_probe(struct platform_device *pdev) } } + /* + * otg regulator is used to control VBUS voltage direction + * when USB switches between host and gadget mode + */ + chg->otg_rdesc.id = -1; + chg->otg_rdesc.name = "otg-vbus"; + chg->otg_rdesc.ops = &smbb_chg_otg_ops; + chg->otg_rdesc.owner = THIS_MODULE; + chg->otg_rdesc.type = REGULATOR_VOLTAGE; + chg->otg_rdesc.supply_name = "usb-otg-in"; + chg->otg_rdesc.of_match = "otg-vbus"; + + config.dev = &pdev->dev; + config.driver_data = chg; + + chg->otg_reg = devm_regulator_register(&pdev->dev, &chg->otg_rdesc, + &config); + if (IS_ERR(chg->otg_reg)) + return PTR_ERR(chg->otg_reg); + chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node, "qcom,jeita-extended-temp-range"); diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c new file mode 100644 index 000000000000..353765a5f44c --- /dev/null +++ b/drivers/power/supply/sbs-charger.c @@ -0,0 +1,274 @@ +/* + * Copyright (c) 2016, Prodys S.L. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This adds support for sbs-charger compilant chips as defined here: + * http://sbs-forum.org/specs/sbc110.pdf + * + * Implemetation based on sbs-battery.c + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/power_supply.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/regmap.h> +#include <linux/of_gpio.h> +#include <linux/bitops.h> + +#define SBS_CHARGER_REG_SPEC_INFO 0x11 +#define SBS_CHARGER_REG_STATUS 0x13 +#define SBS_CHARGER_REG_ALARM_WARNING 0x16 + +#define SBS_CHARGER_STATUS_CHARGE_INHIBITED BIT(1) +#define SBS_CHARGER_STATUS_RES_COLD BIT(9) +#define SBS_CHARGER_STATUS_RES_HOT BIT(10) +#define SBS_CHARGER_STATUS_BATTERY_PRESENT BIT(14) +#define SBS_CHARGER_STATUS_AC_PRESENT BIT(15) + +#define SBS_CHARGER_POLL_TIME 500 + +struct sbs_info { + struct i2c_client *client; + struct power_supply *power_supply; + struct regmap *regmap; + struct delayed_work work; + unsigned int last_state; +}; + +static int sbs_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct sbs_info *chip = power_supply_get_drvdata(psy); + unsigned int reg; + + reg = chip->last_state; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = !!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT); + break; + + case POWER_SUPPLY_PROP_ONLINE: + val->intval = !!(reg & SBS_CHARGER_STATUS_AC_PRESENT); + break; + + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + + if (!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT)) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else if (reg & SBS_CHARGER_STATUS_AC_PRESENT && + !(reg & SBS_CHARGER_STATUS_CHARGE_INHIBITED)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + + break; + + case POWER_SUPPLY_PROP_HEALTH: + if (reg & SBS_CHARGER_STATUS_RES_COLD) + val->intval = POWER_SUPPLY_HEALTH_COLD; + if (reg & SBS_CHARGER_STATUS_RES_HOT) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int sbs_check_state(struct sbs_info *chip) +{ + unsigned int reg; + int ret; + + ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, ®); + if (!ret && reg != chip->last_state) { + chip->last_state = reg; + power_supply_changed(chip->power_supply); + return 1; + } + + return 0; +} + +static void sbs_delayed_work(struct work_struct *work) +{ + struct sbs_info *chip = container_of(work, struct sbs_info, work.work); + + sbs_check_state(chip); + + schedule_delayed_work(&chip->work, + msecs_to_jiffies(SBS_CHARGER_POLL_TIME)); +} + +static irqreturn_t sbs_irq_thread(int irq, void *data) +{ + struct sbs_info *chip = data; + int ret; + + ret = sbs_check_state(chip); + + return ret ? IRQ_HANDLED : IRQ_NONE; +} + +static enum power_supply_property sbs_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_HEALTH, +}; + +static bool sbs_readable_reg(struct device *dev, unsigned int reg) +{ + if (reg < SBS_CHARGER_REG_SPEC_INFO) + return false; + else + return true; +} + +static bool sbs_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SBS_CHARGER_REG_STATUS: + return true; + } + + return false; +} + +static const struct regmap_config sbs_regmap = { + .reg_bits = 8, + .val_bits = 16, + .max_register = SBS_CHARGER_REG_ALARM_WARNING, + .readable_reg = sbs_readable_reg, + .volatile_reg = sbs_volatile_reg, + .val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */ +}; + +static const struct power_supply_desc sbs_desc = { + .name = "sbs-charger", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = sbs_properties, + .num_properties = ARRAY_SIZE(sbs_properties), + .get_property = sbs_get_property, +}; + +static int sbs_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct power_supply_config psy_cfg = {}; + struct sbs_info *chip; + int ret, val; + + chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->client = client; + psy_cfg.of_node = client->dev.of_node; + psy_cfg.drv_data = chip; + + i2c_set_clientdata(client, chip); + + chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap); + if (IS_ERR(chip->regmap)) + return PTR_ERR(chip->regmap); + + /* + * Before we register, we need to make sure we can actually talk + * to the battery. + */ + ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &val); + if (ret) { + dev_err(&client->dev, "Failed to get device status\n"); + return ret; + } + chip->last_state = val; + + chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc, + &psy_cfg); + if (IS_ERR(chip->power_supply)) { + dev_err(&client->dev, "Failed to register power supply\n"); + return PTR_ERR(chip->power_supply); + } + + /* + * The sbs-charger spec doesn't impose the use of an interrupt. So in + * the case it wasn't provided we use polling in order get the charger's + * status. + */ + if (client->irq) { + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, sbs_irq_thread, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(&client->dev), chip); + if (ret) { + dev_err(&client->dev, "Failed to request irq, %d\n", ret); + return ret; + } + } else { + INIT_DELAYED_WORK(&chip->work, sbs_delayed_work); + schedule_delayed_work(&chip->work, + msecs_to_jiffies(SBS_CHARGER_POLL_TIME)); + } + + dev_info(&client->dev, + "%s: smart charger device registered\n", client->name); + + return 0; +} + +static int sbs_remove(struct i2c_client *client) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + + cancel_delayed_work_sync(&chip->work); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id sbs_dt_ids[] = { + { .compatible = "sbs,sbs-charger" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sbs_dt_ids); +#endif + +static const struct i2c_device_id sbs_id[] = { + { "sbs-charger", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sbs_id); + +static struct i2c_driver sbs_driver = { + .probe = sbs_probe, + .remove = sbs_remove, + .id_table = sbs_id, + .driver = { + .name = "sbs-charger", + .of_match_table = of_match_ptr(sbs_dt_ids), + }, +}; +module_i2c_driver(sbs_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>"); +MODULE_DESCRIPTION("SBS smart charger driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c index 9fd019f9b88c..29b61e81b385 100644 --- a/drivers/power/supply/tps65217_charger.c +++ b/drivers/power/supply/tps65217_charger.c @@ -35,22 +35,22 @@ #include <linux/mfd/core.h> #include <linux/mfd/tps65217.h> +#define CHARGER_STATUS_PRESENT (TPS65217_STATUS_ACPWR | TPS65217_STATUS_USBPWR) +#define NUM_CHARGER_IRQS 2 #define POLL_INTERVAL (HZ * 2) struct tps65217_charger { struct tps65217 *tps; struct device *dev; - struct power_supply *ac; + struct power_supply *psy; - int ac_online; - int prev_ac_online; + int online; + int prev_online; struct task_struct *poll_task; - - int irq; }; -static enum power_supply_property tps65217_ac_props[] = { +static enum power_supply_property tps65217_charger_props[] = { POWER_SUPPLY_PROP_ONLINE, }; @@ -95,7 +95,7 @@ static int tps65217_enable_charging(struct tps65217_charger *charger) int ret; /* charger already enabled */ - if (charger->ac_online) + if (charger->online) return 0; dev_dbg(charger->dev, "%s: enable charging\n", __func__); @@ -110,19 +110,19 @@ static int tps65217_enable_charging(struct tps65217_charger *charger) return ret; } - charger->ac_online = 1; + charger->online = 1; return 0; } -static int tps65217_ac_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) +static int tps65217_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) { struct tps65217_charger *charger = power_supply_get_drvdata(psy); if (psp == POWER_SUPPLY_PROP_ONLINE) { - val->intval = charger->ac_online; + val->intval = charger->online; return 0; } return -EINVAL; @@ -133,7 +133,7 @@ static irqreturn_t tps65217_charger_irq(int irq, void *dev) int ret, val; struct tps65217_charger *charger = dev; - charger->prev_ac_online = charger->ac_online; + charger->prev_online = charger->online; ret = tps65217_reg_read(charger->tps, TPS65217_REG_STATUS, &val); if (ret < 0) { @@ -144,8 +144,8 @@ static irqreturn_t tps65217_charger_irq(int irq, void *dev) dev_dbg(charger->dev, "%s: 0x%x\n", __func__, val); - /* check for AC status bit */ - if (val & TPS65217_STATUS_ACPWR) { + /* check for charger status bit */ + if (val & CHARGER_STATUS_PRESENT) { ret = tps65217_enable_charging(charger); if (ret) { dev_err(charger->dev, @@ -153,11 +153,11 @@ static irqreturn_t tps65217_charger_irq(int irq, void *dev) return IRQ_HANDLED; } } else { - charger->ac_online = 0; + charger->online = 0; } - if (charger->prev_ac_online != charger->ac_online) - power_supply_changed(charger->ac); + if (charger->prev_online != charger->online) + power_supply_changed(charger->psy); ret = tps65217_reg_read(charger->tps, TPS65217_REG_CHGCONFIG0, &val); if (ret < 0) { @@ -188,11 +188,11 @@ static int tps65217_charger_poll_task(void *data) } static const struct power_supply_desc tps65217_charger_desc = { - .name = "tps65217-ac", + .name = "tps65217-charger", .type = POWER_SUPPLY_TYPE_MAINS, - .get_property = tps65217_ac_get_property, - .properties = tps65217_ac_props, - .num_properties = ARRAY_SIZE(tps65217_ac_props), + .get_property = tps65217_charger_get_property, + .properties = tps65217_charger_props, + .num_properties = ARRAY_SIZE(tps65217_charger_props), }; static int tps65217_charger_probe(struct platform_device *pdev) @@ -200,8 +200,10 @@ static int tps65217_charger_probe(struct platform_device *pdev) struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); struct tps65217_charger *charger; struct power_supply_config cfg = {}; - int irq; + struct task_struct *poll_task; + int irq[NUM_CHARGER_IRQS]; int ret; + int i; dev_dbg(&pdev->dev, "%s\n", __func__); @@ -216,18 +218,16 @@ static int tps65217_charger_probe(struct platform_device *pdev) cfg.of_node = pdev->dev.of_node; cfg.drv_data = charger; - charger->ac = devm_power_supply_register(&pdev->dev, - &tps65217_charger_desc, - &cfg); - if (IS_ERR(charger->ac)) { + charger->psy = devm_power_supply_register(&pdev->dev, + &tps65217_charger_desc, + &cfg); + if (IS_ERR(charger->psy)) { dev_err(&pdev->dev, "failed: power supply register\n"); - return PTR_ERR(charger->ac); + return PTR_ERR(charger->psy); } - irq = platform_get_irq_byname(pdev, "AC"); - if (irq < 0) - irq = -ENXIO; - charger->irq = irq; + irq[0] = platform_get_irq_byname(pdev, "USB"); + irq[1] = platform_get_irq_byname(pdev, "AC"); ret = tps65217_config_charger(charger); if (ret < 0) { @@ -235,29 +235,36 @@ static int tps65217_charger_probe(struct platform_device *pdev) return ret; } - if (irq != -ENXIO) { - ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + /* Create a polling thread if an interrupt is invalid */ + if (irq[0] < 0 || irq[1] < 0) { + poll_task = kthread_run(tps65217_charger_poll_task, + charger, "ktps65217charger"); + if (IS_ERR(poll_task)) { + ret = PTR_ERR(poll_task); + dev_err(charger->dev, + "Unable to run kthread err %d\n", ret); + return ret; + } + + charger->poll_task = poll_task; + return 0; + } + + /* Create IRQ threads for charger interrupts */ + for (i = 0; i < NUM_CHARGER_IRQS; i++) { + ret = devm_request_threaded_irq(&pdev->dev, irq[i], NULL, tps65217_charger_irq, 0, "tps65217-charger", charger); if (ret) { dev_err(charger->dev, - "Unable to register irq %d err %d\n", irq, + "Unable to register irq %d err %d\n", irq[i], ret); return ret; } /* Check current state */ - tps65217_charger_irq(irq, charger); - } else { - charger->poll_task = kthread_run(tps65217_charger_poll_task, - charger, "ktps65217charger"); - if (IS_ERR(charger->poll_task)) { - ret = PTR_ERR(charger->poll_task); - dev_err(charger->dev, - "Unable to run kthread err %d\n", ret); - return ret; - } + tps65217_charger_irq(-1, charger); } return 0; @@ -267,7 +274,7 @@ static int tps65217_charger_remove(struct platform_device *pdev) { struct tps65217_charger *charger = platform_get_drvdata(pdev); - if (charger->irq == -ENXIO) + if (charger->poll_task) kthread_stop(charger->poll_task); return 0; diff --git a/drivers/power/supply/wm97xx_battery.c b/drivers/power/supply/wm97xx_battery.c index e3edb31ac880..bd4f66651513 100644 --- a/drivers/power/supply/wm97xx_battery.c +++ b/drivers/power/supply/wm97xx_battery.c @@ -175,11 +175,6 @@ static int wm97xx_bat_probe(struct platform_device *dev) if (dev->id != -1) return -EINVAL; - if (!pdata) { - dev_err(&dev->dev, "No platform_data supplied\n"); - return -EINVAL; - } - if (gpio_is_valid(pdata->charge_gpio)) { ret = gpio_request(pdata->charge_gpio, "BATT CHRG"); if (ret) diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index a4860bc9b73d..f848ee86a339 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -13,7 +13,7 @@ #include <linux/regmap.h> -enum { +enum axp20x_variants { AXP152_ID = 0, AXP202_ID, AXP209_ID, @@ -532,35 +532,6 @@ struct axp20x_dev { const struct regmap_irq_chip *regmap_irq_chip; }; -#define BATTID_LEN 64 -#define OCV_CURVE_SIZE 32 -#define MAX_THERM_CURVE_SIZE 25 -#define PD_DEF_MIN_TEMP 0 -#define PD_DEF_MAX_TEMP 55 - -struct axp20x_fg_pdata { - char battid[BATTID_LEN + 1]; - int design_cap; - int min_volt; - int max_volt; - int max_temp; - int min_temp; - int cap1; - int cap0; - int rdc1; - int rdc0; - int ocv_curve[OCV_CURVE_SIZE]; - int tcsz; - int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; -}; - -struct axp20x_chrg_pdata { - int max_cc; - int max_cv; - int def_cc; - int def_cv; -}; - struct axp288_extcon_pdata { /* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */ struct gpio_desc *gpio_mux_cntl; diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h index bed9557b69e7..b312bcef53da 100644 --- a/include/linux/power/bq27xxx_battery.h +++ b/include/linux/power/bq27xxx_battery.h @@ -4,8 +4,16 @@ enum bq27xxx_chip { BQ27000 = 1, /* bq27000, bq27200 */ BQ27010, /* bq27010, bq27210 */ - BQ27500, /* bq27500 */ - BQ27510, /* bq27510, bq27520 */ + BQ2750X, /* bq27500 deprecated alias */ + BQ2751X, /* bq27510, bq27520 deprecated alias */ + BQ27500, /* bq27500/1 */ + BQ27510G1, /* bq27510G1 */ + BQ27510G2, /* bq27510G2 */ + BQ27510G3, /* bq27510G3 */ + BQ27520G1, /* bq27520G1 */ + BQ27520G2, /* bq27520G2 */ + BQ27520G3, /* bq27520G3 */ + BQ27520G4, /* bq27520G4 */ BQ27530, /* bq27530, bq27531 */ BQ27541, /* bq27541, bq27542, bq27546, bq27742 */ BQ27545, /* bq27545 */ diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h index dc10c52e0e91..393362bdb860 100644 --- a/include/soc/at91/at91sam9_ddrsdr.h +++ b/include/soc/at91/at91sam9_ddrsdr.h @@ -81,6 +81,7 @@ #define AT91_DDRSDRC_LPCB_POWER_DOWN 2 #define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 #define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_LPDDR2_PWOFF (1 << 3) /* LPDDR Power Off */ #define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ #define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ #define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ @@ -96,7 +97,9 @@ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 +#define AT91_DDRSDRC_MD_LPDDR3 5 #define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ +#define AT91_DDRSDRC_MD_LPDDR2 7 #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ #define AT91_DDRSDRC_DBW_32BITS (0 << 4) #define AT91_DDRSDRC_DBW_16BITS (1 << 4) |