diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-21 20:37:11 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-21 20:37:11 -0800 |
commit | 3c688149cea2083b96e220b9884b034867373943 (patch) | |
tree | 1ad14a3e10c5f1e4d9419ce69ef5118037e36657 /drivers/usb | |
parent | 3b9abc7e48561b0b140ee267e190bc1031f82ff3 (diff) | |
parent | b1ffb4c851f185e9051ba837c16d9b84ef688d26 (diff) |
Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits)
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
USB: option: add PID of Huawei E173s 3G modem
OHCI: final fix for NVIDIA problems (I hope)
USB: option: release new PID for ZTE 3G modem
usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c
USB: storage: ene_ub6250: fix compile warnings
USB: option: add id for 3G dongle Model VT1000 of Viettel
USB: serial: pl2303: rm duplicate id
USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
usb-storage: Accept 8020i-protocol commands longer than 12 bytes
USB: quirks: adding more quirky webcams to avoid squeaky audio
powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit
USB: at91: at91-ohci: fix set/get power
USB: cdc-acm: Fix disconnect() vs close() race
USB: add quirk for Logitech C600 web cam
USB: EHCI: fix HUB TT scheduling issue with iso transfer
USB: XHCI: resume root hubs when the controller resumes
USB: workaround for bug in old version of GCC
USB: ark3116 initialisation fix
...
Diffstat (limited to 'drivers/usb')
42 files changed, 332 insertions, 282 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6960715c5063..e8c564a53346 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -539,7 +539,6 @@ static void acm_port_down(struct acm *acm) { int i; - mutex_lock(&open_mutex); if (acm->dev) { usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); @@ -551,14 +550,15 @@ static void acm_port_down(struct acm *acm) acm->control->needs_remote_wakeup = 0; usb_autopm_put_interface(acm->control); } - mutex_unlock(&open_mutex); } static void acm_tty_hangup(struct tty_struct *tty) { struct acm *acm = tty->driver_data; tty_port_hangup(&acm->port); + mutex_lock(&open_mutex); acm_port_down(acm); + mutex_unlock(&open_mutex); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) @@ -569,8 +569,9 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) shutdown */ if (!acm) return; + + mutex_lock(&open_mutex); if (tty_port_close_start(&acm->port, tty, filp) == 0) { - mutex_lock(&open_mutex); if (!acm->dev) { tty_port_tty_set(&acm->port, NULL); acm_tty_unregister(acm); @@ -582,6 +583,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) acm_port_down(acm); tty_port_close_end(&acm->port, tty); tty_port_tty_set(&acm->port, NULL); + mutex_unlock(&open_mutex); } static int acm_tty_write(struct tty_struct *tty, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 96f05b29c9ad..79781461eec9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_C_PORT_LINK_STATE); } + if ((portchange & USB_PORT_STAT_C_BH_RESET) && + hub_is_superspeed(hub->hdev)) { + need_debounce_delay = true; + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } /* We can forget about a "removed" device when there's a * physical disconnect or the connect status changes. */ diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d6a8d8269bfb..ecf12e15a7ef 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -50,15 +50,42 @@ static const struct usb_device_id usb_quirk_list[] = { /* Logitech Webcam B/C500 */ { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C600 */ + { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam Pro 9000 */ { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C905 */ + { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C210 */ + { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C260 */ + { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C310 */ { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C910 */ + { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Webcam C160 */ + { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Webcam C270 */ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Quickcam Pro 9000 */ + { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam E3500 */ + { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam Vision Pro */ + { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Harmony 700-series */ { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index fa824cfdd2eb..25dbd8614e72 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1284,6 +1284,7 @@ static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) int ret; dep->endpoint.maxpacket = 1024; + dep->endpoint.max_streams = 15; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list, &dwc->gadget.ep_list); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b21cd376c11a..23a447373c51 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -469,7 +469,7 @@ config USB_LANGWELL gadget drivers to also be dynamically linked. config USB_EG20T - tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC" + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" depends on PCI select USB_GADGET_DUALSPEED help @@ -485,10 +485,11 @@ config USB_EG20T This driver dose not support interrupt transfer or isochronous transfer modes. - This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is + This driver also can be used for LAPIS Semiconductor's ML7213 which is for IVI(In-Vehicle Infotainment) use. - ML7213 is companion chip for Intel Atom E6xx series. - ML7213 is completely compatible for Intel EG20T PCH. + ML7831 is for general purpose use. + ML7213/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7831 is completely compatible for Intel EG20T PCH. config USB_CI13XXX_MSM tristate "MIPS USB CI13xxx for MSM" diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c index 4eedfe557154..1fc612914c52 100644 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ b/drivers/usb/gadget/ci13xxx_msm.c @@ -122,3 +122,5 @@ static int __init ci13xxx_msm_init(void) return platform_driver_register(&ci13xxx_msm_driver); } module_init(ci13xxx_msm_init); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 83428f56253b..9a0c3979ff43 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -71,6 +71,9 @@ /****************************************************************************** * DEFINE *****************************************************************************/ + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + /* ctrl register bank access */ static DEFINE_SPINLOCK(udc_lock); @@ -1434,7 +1437,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) return -EALREADY; mReq->req.status = -EALREADY; - if (length && !mReq->req.dma) { + if (length && mReq->req.dma == DMA_ADDR_INVALID) { mReq->req.dma = \ dma_map_single(mEp->device, mReq->req.buf, length, mEp->dir ? DMA_TO_DEVICE : @@ -1453,7 +1456,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) dma_unmap_single(mEp->device, mReq->req.dma, length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } return -ENOMEM; @@ -1549,7 +1552,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) if (mReq->map) { dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } @@ -1610,7 +1613,6 @@ __acquires(mEp->lock) * @gadget: gadget * * This function returns an error code - * Caller must hold lock */ static int _gadget_stop_activity(struct usb_gadget *gadget) { @@ -2189,6 +2191,7 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); if (mReq != NULL) { INIT_LIST_HEAD(&mReq->queue); + mReq->req.dma = DMA_ADDR_INVALID; mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags, &mReq->dma); @@ -2328,7 +2331,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) if (mReq->map) { dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - mReq->req.dma = 0; + mReq->req.dma = DMA_ADDR_INVALID; mReq->map = 0; } req->status = -ECONNRESET; @@ -2500,12 +2503,12 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget) spin_lock_irqsave(udc->lock, flags); if (!udc->remote_wakeup) { ret = -EOPNOTSUPP; - dbg_trace("remote wakeup feature is not enabled\n"); + trace("remote wakeup feature is not enabled\n"); goto out; } if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; - dbg_trace("port is not suspended\n"); + trace("port is not suspended\n"); goto out; } hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR); @@ -2703,7 +2706,9 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) if (udc->udc_driver->notify_event) udc->udc_driver->notify_event(udc, CI13XXX_CONTROLLER_STOPPED_EVENT); + spin_unlock_irqrestore(udc->lock, flags); _gadget_stop_activity(&udc->gadget); + spin_lock_irqsave(udc->lock, flags); pm_runtime_put(&udc->gadget.dev); } @@ -2850,7 +2855,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, struct ci13xxx *udc; int retval = 0; - trace("%p, %p, %p", dev, regs, name); + trace("%p, %p, %p", dev, regs, driver->name); if (dev == NULL || regs == NULL || driver == NULL || driver->name == NULL) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 52583a235330..c39d58860fa0 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -624,7 +624,8 @@ static int fsg_setup(struct usb_function *f, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != fsg->interface_number || w_value != 0) + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 0) return -EDOM; /* @@ -639,7 +640,8 @@ static int fsg_setup(struct usb_function *f, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != fsg->interface_number || w_value != 0) + if (w_index != fsg->interface_number || w_value != 0 || + w_length != 1) return -EDOM; VDBG(fsg, "get max LUN\n"); *(u8 *)req->buf = fsg->common->nluns - 1; diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c index 67b222908cf9..3797b3d6c622 100644 --- a/drivers/usb/gadget/f_midi.c +++ b/drivers/usb/gadget/f_midi.c @@ -95,7 +95,6 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req); DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); -DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16); DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16); /* B.3.1 Standard AC Interface Descriptor */ @@ -140,26 +139,6 @@ static struct usb_ms_header_descriptor ms_header_desc __initdata = { /* .wTotalLength = DYNAMIC */ }; -/* B.4.3 Embedded MIDI IN Jack Descriptor */ -static struct usb_midi_in_jack_descriptor jack_in_emb_desc = { - .bLength = USB_DT_MIDI_IN_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, - .bJackType = USB_MS_EMBEDDED, - /* .bJackID = DYNAMIC */ -}; - -/* B.4.4 Embedded MIDI OUT Jack Descriptor */ -static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = { - /* .bLength = DYNAMIC */ - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, - .bJackType = USB_MS_EMBEDDED, - /* .bJackID = DYNAMIC */ - /* .bNrInputPins = DYNAMIC */ - /* .pins = DYNAMIC */ -}; - /* B.5.1 Standard Bulk OUT Endpoint Descriptor */ static struct usb_endpoint_descriptor bulk_out_desc = { .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, @@ -758,9 +737,11 @@ fail: static int __init f_midi_bind(struct usb_configuration *c, struct usb_function *f) { - struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12]; + struct usb_descriptor_header **midi_function; struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS]; + struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS]; struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS]; + struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS]; struct usb_composite_dev *cdev = c->cdev; struct f_midi *midi = func_to_midi(f); int status, n, jack = 1, i = 0; @@ -798,6 +779,14 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) goto fail; midi->out_ep->driver_data = cdev; /* claim */ + /* allocate temporary function list */ + midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(midi_function), + GFP_KERNEL); + if (!midi_function) { + status = -ENOMEM; + goto fail; + } + /* * construct the function's descriptor set. As the number of * input and output MIDI ports is configurable, we have to do @@ -811,73 +800,74 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) /* calculate the header's wTotalLength */ n = USB_DT_MS_HEADER_SIZE - + (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE - + (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1); + + (midi->in_ports + midi->out_ports) * + (USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1)); ms_header_desc.wTotalLength = cpu_to_le16(n); midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc; - /* we have one embedded IN jack */ - jack_in_emb_desc.bJackID = jack++; - midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc; - - /* and a dynamic amount of external IN jacks */ - for (n = 0; n < midi->in_ports; n++) { - struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n]; - - ext->bLength = USB_DT_MIDI_IN_SIZE; - ext->bDescriptorType = USB_DT_CS_INTERFACE; - ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; - ext->bJackType = USB_MS_EXTERNAL; - ext->bJackID = jack++; - ext->iJack = 0; - - midi_function[i++] = (struct usb_descriptor_header *) ext; - } - - /* one embedded OUT jack ... */ - jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports); - jack_out_emb_desc.bJackID = jack++; - jack_out_emb_desc.bNrInputPins = midi->in_ports; - /* ... which referencess all external IN jacks */ + /* configure the external IN jacks, each linked to an embedded OUT jack */ for (n = 0; n < midi->in_ports; n++) { - jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID; - jack_out_emb_desc.pins[n].baSourcePin = 1; + struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n]; + struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n]; + + in_ext->bLength = USB_DT_MIDI_IN_SIZE; + in_ext->bDescriptorType = USB_DT_CS_INTERFACE; + in_ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + in_ext->bJackType = USB_MS_EXTERNAL; + in_ext->bJackID = jack++; + in_ext->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) in_ext; + + out_emb->bLength = USB_DT_MIDI_OUT_SIZE(1); + out_emb->bDescriptorType = USB_DT_CS_INTERFACE; + out_emb->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + out_emb->bJackType = USB_MS_EMBEDDED; + out_emb->bJackID = jack++; + out_emb->bNrInputPins = 1; + out_emb->pins[0].baSourcePin = 1; + out_emb->pins[0].baSourceID = in_ext->bJackID; + out_emb->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) out_emb; + + /* link it to the endpoint */ + ms_in_desc.baAssocJackID[n] = out_emb->bJackID; } - midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc; - - /* and multiple external OUT jacks ... */ + /* configure the external OUT jacks, each linked to an embedded IN jack */ for (n = 0; n < midi->out_ports; n++) { - struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n]; - int m; - - ext->bLength = USB_DT_MIDI_OUT_SIZE(1); - ext->bDescriptorType = USB_DT_CS_INTERFACE; - ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; - ext->bJackType = USB_MS_EXTERNAL; - ext->bJackID = jack++; - ext->bNrInputPins = 1; - ext->iJack = 0; - /* ... which all reference the same embedded IN jack */ - for (m = 0; m < midi->out_ports; m++) { - ext->pins[m].baSourceID = jack_in_emb_desc.bJackID; - ext->pins[m].baSourcePin = 1; - } - - midi_function[i++] = (struct usb_descriptor_header *) ext; + struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n]; + struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n]; + + in_emb->bLength = USB_DT_MIDI_IN_SIZE; + in_emb->bDescriptorType = USB_DT_CS_INTERFACE; + in_emb->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + in_emb->bJackType = USB_MS_EMBEDDED; + in_emb->bJackID = jack++; + in_emb->iJack = 0; + midi_function[i++] = (struct usb_descriptor_header *) in_emb; + + out_ext->bLength = USB_DT_MIDI_OUT_SIZE(1); + out_ext->bDescriptorType = USB_DT_CS_INTERFACE; + out_ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + out_ext->bJackType = USB_MS_EXTERNAL; + out_ext->bJackID = jack++; + out_ext->bNrInputPins = 1; + out_ext->iJack = 0; + out_ext->pins[0].baSourceID = in_emb->bJackID; + out_ext->pins[0].baSourcePin = 1; + midi_function[i++] = (struct usb_descriptor_header *) out_ext; + + /* link it to the endpoint */ + ms_out_desc.baAssocJackID[n] = in_emb->bJackID; } /* configure the endpoint descriptors ... */ ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); ms_out_desc.bNumEmbMIDIJack = midi->in_ports; - for (n = 0; n < midi->in_ports; n++) - ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID; ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); ms_in_desc.bNumEmbMIDIJack = midi->out_ports; - for (n = 0; n < midi->out_ports; n++) - ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID; /* ... and add them to the list */ midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc; @@ -901,6 +891,8 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) f->descriptors = usb_copy_descriptors(midi_function); } + kfree(midi_function); + return 0; fail: diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index f7e39b0365ce..11b5196284ae 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -859,7 +859,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0 || w_value != 0) { + if (w_index != 0 || w_value != 0 || w_length != 0) { value = -EDOM; break; } @@ -875,7 +875,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0 || w_value != 0) { + if (w_index != 0 || w_value != 0 || w_length != 1) { value = -EDOM; break; } diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index d786ba31fc07..b3b3d83b7c33 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2480,8 +2480,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) #ifndef CONFIG_ARCH_MXC if (pdata->have_sysif_regs) - usb_sys_regs = (struct usb_sys_interface *) - ((u32)dr_regs + USB_DR_SYS_OFFSET); + usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET; #endif /* Initialize USB clocks */ diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index a392ec0d2d51..6ccae2707e59 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1730,8 +1730,9 @@ static void gadgetfs_disconnect (struct usb_gadget *gadget) { struct dev_data *dev = get_gadget_data (gadget); + unsigned long flags; - spin_lock (&dev->lock); + spin_lock_irqsave (&dev->lock, flags); if (dev->state == STATE_DEV_UNCONNECTED) goto exit; dev->state = STATE_DEV_UNCONNECTED; @@ -1740,7 +1741,7 @@ gadgetfs_disconnect (struct usb_gadget *gadget) next_event (dev, GADGETFS_DISCONNECT); ep0_readable (dev); exit: - spin_unlock (&dev->lock); + spin_unlock_irqrestore (&dev->lock, flags); } static void diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 550d6dcdf104..5048a0c07640 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -354,6 +354,7 @@ struct pch_udc_dev { #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 #define PCI_VENDOR_ID_ROHM 0x10DB #define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D +#define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808 static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ @@ -2970,6 +2971,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, .class_mask = 0xffffffff, }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC), + .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, + .class_mask = 0xffffffff, + }, { 0 }, }; @@ -2999,5 +3005,5 @@ static void __exit pch_udc_pci_exit(void) module_exit(pch_udc_pci_exit); MODULE_DESCRIPTION("Intel EG20T USB Device Controller"); -MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>"); +MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 68a826a1b866..24f84b210ce1 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1718,6 +1718,8 @@ static void r8a66597_fifo_flush(struct usb_ep *_ep) if (list_empty(&ep->queue) && !ep->busy) { pipe_stop(ep->r8a66597, ep->pipenum); r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr); + r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr); + r8a66597_write(ep->r8a66597, 0, ep->pipectr); } spin_unlock_irqrestore(&ep->r8a66597->lock, flags); } @@ -1742,7 +1744,6 @@ static int r8a66597_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); - int retval; if (!driver || driver->speed != USB_SPEED_HIGH @@ -1752,16 +1753,7 @@ static int r8a66597_start(struct usb_gadget *gadget, return -ENODEV; /* hook up the driver */ - driver->driver.bus = NULL; r8a66597->driver = driver; - r8a66597->gadget.dev.driver = &driver->driver; - - retval = device_add(&r8a66597->gadget.dev); - if (retval) { - dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n", - retval); - goto error; - } init_controller(r8a66597); r8a66597_bset(r8a66597, VBSE, INTENB0); @@ -1775,12 +1767,6 @@ static int r8a66597_start(struct usb_gadget *gadget, } return 0; - -error: - r8a66597->driver = NULL; - r8a66597->gadget.dev.driver = NULL; - - return retval; } static int r8a66597_stop(struct usb_gadget *gadget, @@ -1794,7 +1780,6 @@ static int r8a66597_stop(struct usb_gadget *gadget, disable_controller(r8a66597); spin_unlock_irqrestore(&r8a66597->lock, flags); - device_del(&r8a66597->gadget.dev); r8a66597->driver = NULL; return 0; } @@ -1845,6 +1830,7 @@ static int __exit r8a66597_remove(struct platform_device *pdev) clk_put(r8a66597->clk); } #endif + device_unregister(&r8a66597->gadget.dev); kfree(r8a66597); return 0; } @@ -1924,13 +1910,17 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW; r8a66597->gadget.ops = &r8a66597_gadget_ops; - device_initialize(&r8a66597->gadget.dev); dev_set_name(&r8a66597->gadget.dev, "gadget"); r8a66597->gadget.is_dualspeed = 1; r8a66597->gadget.dev.parent = &pdev->dev; r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask; r8a66597->gadget.dev.release = pdev->dev.release; r8a66597->gadget.name = udc_name; + ret = device_register(&r8a66597->gadget.dev); + if (ret < 0) { + dev_err(&pdev->dev, "device_register failed\n"); + goto clean_up; + } init_timer(&r8a66597->timer); r8a66597->timer.function = r8a66597_timer; @@ -1945,7 +1935,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); ret = PTR_ERR(r8a66597->clk); - goto clean_up; + goto clean_up_dev; } clk_enable(r8a66597->clk); } @@ -2014,7 +2004,9 @@ clean_up2: clk_disable(r8a66597->clk); clk_put(r8a66597->clk); } +clean_up_dev: #endif + device_unregister(&r8a66597->gadget.dev); clean_up: if (r8a66597) { if (r8a66597->sudmac_reg) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 022baeca7c94..6939e17f4580 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -210,10 +210,10 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); if (udc_is_newstyle(udc)) { - usb_gadget_disconnect(udc->gadget); + udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); - + usb_gadget_disconnect(udc->gadget); } else { usb_gadget_stop(udc->gadget, udc->driver); } @@ -344,7 +344,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver); static ssize_t usb_udc_srp_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct usb_udc *udc = dev_get_drvdata(dev); + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); if (sysfs_streq(buf, "1")) usb_gadget_wakeup(udc->gadget); @@ -378,7 +378,7 @@ static ssize_t usb_udc_speed_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%s\n", usb_speed_string(udc->gadget->speed)); } -static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL); +static DEVICE_ATTR(speed, S_IRUGO, usb_udc_speed_show, NULL); #define USB_UDC_ATTR(name) \ ssize_t usb_udc_##name##_show(struct device *dev, \ @@ -389,7 +389,7 @@ ssize_t usb_udc_##name##_show(struct device *dev, \ \ return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name); \ } \ -static DEVICE_ATTR(name, S_IRUSR, usb_udc_##name##_show, NULL) +static DEVICE_ATTR(name, S_IRUGO, usb_udc_##name##_show, NULL) static USB_UDC_ATTR(is_dualspeed); static USB_UDC_ATTR(is_otg); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 2e829fae6482..56a32033adb3 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1479,10 +1479,15 @@ iso_stream_schedule ( /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ - /* find a uframe slot with enough bandwidth */ - next = start + period; - for (; start < next; start++) { - + /* find a uframe slot with enough bandwidth. + * Early uframes are more precious because full-speed + * iso IN transfers can't use late uframes, + * and therefore they should be allocated last. + */ + next = start; + start += period; + do { + start--; /* check schedule: enough space? */ if (stream->highspeed) { if (itd_slot_ok(ehci, mod, start, @@ -1495,7 +1500,7 @@ iso_stream_schedule ( start, sched, period)) break; } - } + } while (start > next); /* no room in the schedule */ if (start == next) { diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c index fe74bd676018..b4fb511d24bc 100644 --- a/drivers/usb/host/ehci-xls.c +++ b/drivers/usb/host/ehci-xls.c @@ -19,7 +19,7 @@ static int ehci_xls_setup(struct usb_hcd *hcd) ehci->caps = hcd->regs; ehci->regs = hcd->regs + - HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); dbg_hcs_params(ehci, "reset"); dbg_hcc_params(ehci, "reset"); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index ba3a46b78b75..95a9fec38e89 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -223,6 +223,9 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (port < 0 || port >= 2) return; + if (pdata->vbus_pin[port] <= 0) + return; + gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable); } @@ -231,6 +234,9 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (port < 0 || port >= 2) return -EINVAL; + if (pdata->vbus_pin[port] <= 0) + return -EINVAL; + return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted; } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 34efd479e068..b2639191549e 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd) struct ohci_hcd *ohci; ohci = hcd_to_ohci (hcd); - ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable); - /* If the SHUTDOWN quirk is set, don't put the controller in RESET */ - ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ? - OHCI_CTRL_RWC | OHCI_CTRL_HCFS : - OHCI_CTRL_RWC); - ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); + /* Software reset, after which the controller goes into SUSPEND */ + ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus); + ohci_readl(ohci, &ohci->regs->cmdstatus); /* flush the writes */ + udelay(10); - /* flush the writes */ - (void) ohci_readl (ohci, &ohci->regs->control); + ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval); } static int check_ed(struct ohci_hcd *ohci, struct ed *ed) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index ad8166c681e2..bc01b064585a 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; } -/* nVidia controllers continue to drive Reset signalling on the bus - * even after system shutdown, wasting power. This flag tells the - * shutdown routine to leave the controller OPERATIONAL instead of RESET. - */ -static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd) -{ - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - /* Evidently nVidia fixed their later hardware; this is a guess at - * the changeover point. - */ -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB 0x026d - - if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) { - ohci->flags |= OHCI_QUIRK_SHUTDOWN; - ohci_dbg(ohci, "enabled nVidia shutdown quirk\n"); - } - - return 0; -} - static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; @@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, - { - PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID), - .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown, - }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 35e5fd640ce7..0795b934d00c 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -403,7 +403,6 @@ struct ohci_hcd { #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ -#define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 27a3dec32fa2..caf87428ca43 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -37,6 +37,7 @@ #define OHCI_INTRENABLE 0x10 #define OHCI_INTRDISABLE 0x14 #define OHCI_FMINTERVAL 0x34 +#define OHCI_HCFS (3 << 6) /* hc functional state */ #define OHCI_HCR (1 << 0) /* host controller reset */ #define OHCI_OCR (1 << 3) /* ownership change request */ #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ @@ -466,6 +467,8 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; u32 control; + u32 fminterval; + int cnt; if (!mmio_resource_enabled(pdev, 0)) return; @@ -498,41 +501,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) } #endif - /* reset controller, preserving RWC (and possibly IR) */ - writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); - readl(base + OHCI_CONTROL); + /* disable interrupts */ + writel((u32) ~0, base + OHCI_INTRDISABLE); - /* Some NVIDIA controllers stop working if kept in RESET for too long */ - if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) { - u32 fminterval; - int cnt; + /* Reset the USB bus, if the controller isn't already in RESET */ + if (control & OHCI_HCFS) { + /* Go into RESET, preserving RWC (and possibly IR) */ + writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); + readl(base + OHCI_CONTROL); - /* drive reset for at least 50 ms (7.1.7.5) */ + /* drive bus reset for at least 50 ms (7.1.7.5) */ msleep(50); + } - /* software reset of the controller, preserving HcFmInterval */ - fminterval = readl(base + OHCI_FMINTERVAL); - writel(OHCI_HCR, base + OHCI_CMDSTATUS); + /* software reset of the controller, preserving HcFmInterval */ + fminterval = readl(base + OHCI_FMINTERVAL); + writel(OHCI_HCR, base + OHCI_CMDSTATUS); - /* reset requires max 10 us delay */ - for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ - if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) - break; - udelay(1); - } - writel(fminterval, base + OHCI_FMINTERVAL); - - /* Now we're in the SUSPEND state with all devices reset - * and wakeups and interrupts disabled - */ + /* reset requires max 10 us delay */ + for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ + if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) + break; + udelay(1); } + writel(fminterval, base + OHCI_FMINTERVAL); - /* - * disable interrupts - */ - writel(~(u32)0, base + OHCI_INTRDISABLE); - writel(~(u32)0, base + OHCI_INTRSTATUS); - + /* Now the controller is safely in SUSPEND and nothing can wake it up */ iounmap(base); } @@ -627,7 +621,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) void __iomem *base, *op_reg_base; u32 hcc_params, cap, val; u8 offset, cap_length; - int wait_time, delta, count = 256/4; + int wait_time, count = 256/4; if (!mmio_resource_enabled(pdev, 0)) return; @@ -673,11 +667,10 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) writel(val, op_reg_base + EHCI_USBCMD); wait_time = 2000; - delta = 100; do { writel(0x3f, op_reg_base + EHCI_USBSTS); - udelay(delta); - wait_time -= delta; + udelay(100); + wait_time -= 100; val = readl(op_reg_base + EHCI_USBSTS); if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { break; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 42a22b8e6922..0e4b25fa3bcd 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -982,7 +982,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; struct xhci_slot_ctx *slot_ctx; - struct xhci_input_control_ctx *ctrl_ctx; u32 port_num; struct usb_device *top_dev; @@ -994,12 +993,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud return -EINVAL; } ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0); - ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx); slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx); - /* 2) New slot context and endpoint 0 context are valid*/ - ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); - /* 3) Only the control endpoint is valid - one endpoint context */ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route); switch (udev->speed) { diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 940321b3ec68..9f1d4b15d818 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -816,23 +816,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) struct xhci_ring *ring; struct xhci_td *cur_td; int ret, i, j; + unsigned long flags; ep = (struct xhci_virt_ep *) arg; xhci = ep->xhci; - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; if (xhci->xhc_state & XHCI_STATE_DYING) { xhci_dbg(xhci, "Stop EP timer ran, but another timer marked " "xHCI as DYING, exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg(xhci, "Stop EP timer ran, but no command pending, " "exiting.\n"); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -844,11 +845,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) xhci->xhc_state |= XHCI_STATE_DYING; /* Disable interrupts from the host controller and start halting it */ xhci_quiesce(xhci); - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); ret = xhci_halt(xhci); - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); if (ret < 0) { /* This is bad; the host is not responding to commands and it's * not allowing itself to be halted. At least interrupts are @@ -896,7 +897,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) } } } - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Calling usb_hc_died()\n"); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1ff95a0df576..aa94c0195791 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -799,7 +799,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; - int retval; + int retval = 0; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -809,6 +809,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci->bus_state[1].next_statechange)) msleep(100); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); + spin_lock_irq(&xhci->lock); if (xhci->quirks & XHCI_RESET_ON_RESUME) hibernated = true; @@ -878,20 +881,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); - if (retval) - goto failed_restart; - - xhci_dbg(xhci, "Start the secondary HCD\n"); - retval = xhci_run(secondary_hcd); if (!retval) { - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - set_bit(HCD_FLAG_HW_ACCESSIBLE, - &xhci->shared_hcd->flags); + xhci_dbg(xhci, "Start the secondary HCD\n"); + retval = xhci_run(secondary_hcd); } -failed_restart: hcd->state = HC_STATE_SUSPENDED; xhci->shared_hcd->state = HC_STATE_SUSPENDED; - return retval; + goto done; } /* step 4: set Run/Stop bit */ @@ -910,11 +906,14 @@ failed_restart: * Running endpoints by ringing their doorbells */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); - spin_unlock_irq(&xhci->lock); - return 0; + + done: + if (retval == 0) { + usb_hcd_resume_root_hub(hcd); + usb_hcd_resume_root_hub(xhci->shared_hcd); + } + return retval; } #endif /* CONFIG_PM */ @@ -3504,6 +3503,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* Otherwise, update the control endpoint ring enqueue pointer. */ else xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); + ctrl_ctx->drop_flags = 0; + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); @@ -3585,7 +3588,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK) + 1; /* Zero the input context control for later use */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); ctrl_ctx->add_flags = 0; ctrl_ctx->drop_flags = 0; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index fc34b8b11910..07a03460a598 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS + select USB_GADGET_DUALSPEED tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB @@ -60,7 +61,7 @@ config USB_MUSB_BLACKFIN config USB_MUSB_UX500 tristate "U8500 and U5500" - depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500) + depends on (ARCH_U8500 && AB8500_USB) endchoice diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 08f1d0b662a3..e233d2b7d335 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -27,6 +27,7 @@ */ #include <linux/init.h> +#include <linux/module.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/platform_device.h> diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 4da7492ddbdb..2613bfdb09b6 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -27,6 +27,7 @@ */ #include <linux/init.h> +#include <linux/module.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/platform_device.h> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 20a28731c338..c1fa12ec7a9a 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1477,8 +1477,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) /*-------------------------------------------------------------------------*/ #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \ - defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \ - defined(CONFIG_ARCH_U5500) + defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) static irqreturn_t generic_interrupt(int irq, void *__hci) { diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ae4a20acef6c..d51043acfe1a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1999,10 +1999,6 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver) nuke(&hw_ep->ep_out, -ESHUTDOWN); } } - - spin_unlock(&musb->lock); - driver->disconnect(&musb->g); - spin_lock(&musb->lock); } } diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index d2e2efaba658..08c679c0dde5 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -405,7 +405,7 @@ int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) /* * platform functions */ -static int __devinit usbhs_probe(struct platform_device *pdev) +static int usbhs_probe(struct platform_device *pdev) { struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; struct renesas_usbhs_driver_callback *dfunc; diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 8da685e796d1..ffdf5d15085e 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -820,7 +820,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) if (len % 4) /* 32bit alignment */ goto usbhsf_pio_prepare_push; - if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_push; /* get enable DMA fifo */ @@ -897,7 +897,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) if (!fifo) goto usbhsf_pio_prepare_pop; - if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ + if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_pop; ret = usbhsf_fifo_select(pipe, fifo, 0); diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h index 8ae3733031cd..6c6875533f01 100644 --- a/drivers/usb/renesas_usbhs/mod.h +++ b/drivers/usb/renesas_usbhs/mod.h @@ -143,8 +143,8 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod); */ #if defined(CONFIG_USB_RENESAS_USBHS_HCD) || \ defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE) -extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv); -extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv); +extern int usbhs_mod_host_probe(struct usbhs_priv *priv); +extern int usbhs_mod_host_remove(struct usbhs_priv *priv); #else static inline int usbhs_mod_host_probe(struct usbhs_priv *priv) { @@ -157,8 +157,8 @@ static inline void usbhs_mod_host_remove(struct usbhs_priv *priv) #if defined(CONFIG_USB_RENESAS_USBHS_UDC) || \ defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE) -extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv); -extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv); +extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv); +extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv); #else static inline int usbhs_mod_gadget_probe(struct usbhs_priv *priv) { diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 4cc7ee0babc6..d9717e0bc1ff 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -830,7 +830,7 @@ static int usbhsg_stop(struct usbhs_priv *priv) return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); } -int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv) +int usbhs_mod_gadget_probe(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv; struct usbhsg_uep *uep; @@ -927,7 +927,7 @@ usbhs_mod_gadget_probe_err_gpriv: return ret; } -void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv) +void usbhs_mod_gadget_remove(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 1a7208a50afc..bade761a1e52 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -103,7 +103,7 @@ struct usbhsh_hpriv { u32 port_stat; /* USB_PORT_STAT_xxx */ - struct completion *done; + struct completion setup_ack_done; /* see usbhsh_req_alloc/free */ struct list_head ureq_link_active; @@ -355,6 +355,7 @@ static void usbhsh_device_free(struct usbhsh_hpriv *hpriv, struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, struct usbhsh_device *udev, struct usb_host_endpoint *ep, + int dir_in_req, gfp_t mem_flags) { struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); @@ -364,27 +365,38 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, struct usbhs_pipe *pipe, *best_pipe; struct device *dev = usbhsh_hcd_to_dev(hcd); struct usb_endpoint_descriptor *desc = &ep->desc; - int type, i; + int type, i, dir_in; unsigned int min_usr; + dir_in_req = !!dir_in_req; + uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags); if (!uep) { dev_err(dev, "usbhsh_ep alloc fail\n"); return NULL; } - type = usb_endpoint_type(desc); + + if (usb_endpoint_xfer_control(desc)) { + best_pipe = usbhsh_hpriv_to_dcp(hpriv); + goto usbhsh_endpoint_alloc_find_pipe; + } /* * find best pipe for endpoint * see * HARDWARE LIMITATION */ + type = usb_endpoint_type(desc); min_usr = ~0; best_pipe = NULL; - usbhs_for_each_pipe_with_dcp(pipe, priv, i) { + usbhs_for_each_pipe(pipe, priv, i) { if (!usbhs_pipe_type_is(pipe, type)) continue; + dir_in = !!usbhs_pipe_is_dir_in(pipe); + if (0 != (dir_in - dir_in_req)) + continue; + info = usbhsh_pipe_info(pipe); if (min_usr > info->usr_cnt) { @@ -398,7 +410,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, kfree(uep); return NULL; } - +usbhsh_endpoint_alloc_find_pipe: /* * init uep */ @@ -423,6 +435,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, * see * DCPMAXP/PIPEMAXP */ + usbhs_pipe_sequence_data0(uep->pipe); usbhs_pipe_config_update(uep->pipe, usbhsh_device_number(hpriv, udev), usb_endpoint_num(desc), @@ -430,7 +443,7 @@ struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv, dev_dbg(dev, "%s [%d-%s](%p)\n", __func__, usbhsh_device_number(hpriv, udev), - usbhs_pipe_name(pipe), uep); + usbhs_pipe_name(uep->pipe), uep); return uep; } @@ -549,8 +562,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, * usbhsh_irq_setup_ack() * usbhsh_irq_setup_err() */ - DECLARE_COMPLETION(done); - hpriv->done = &done; + init_completion(&hpriv->setup_ack_done); /* copy original request */ memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest)); @@ -572,8 +584,7 @@ static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, /* * wait setup packet ACK */ - wait_for_completion(&done); - hpriv->done = NULL; + wait_for_completion(&hpriv->setup_ack_done); dev_dbg(dev, "%s done\n", __func__); } @@ -724,11 +735,11 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, struct usbhsh_device *udev, *new_udev = NULL; struct usbhs_pipe *pipe; struct usbhsh_ep *uep; + int is_dir_in = usb_pipein(urb->pipe); int ret; - dev_dbg(dev, "%s (%s)\n", - __func__, usb_pipein(urb->pipe) ? "in" : "out"); + dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out"); ret = usb_hcd_link_urb_to_ep(hcd, urb); if (ret) @@ -751,7 +762,8 @@ static int usbhsh_urb_enqueue(struct usb_hcd *hcd, */ uep = usbhsh_ep_to_uep(ep); if (!uep) { - uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags); + uep = usbhsh_endpoint_alloc(hpriv, udev, ep, + is_dir_in, mem_flags); if (!uep) goto usbhsh_urb_enqueue_error_free_device; } @@ -1095,10 +1107,7 @@ static int usbhsh_irq_setup_ack(struct usbhs_priv *priv, dev_dbg(dev, "setup packet OK\n"); - if (unlikely(!hpriv->done)) - dev_err(dev, "setup ack happen without necessary data\n"); - else - complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ return 0; } @@ -1111,10 +1120,7 @@ static int usbhsh_irq_setup_err(struct usbhs_priv *priv, dev_dbg(dev, "setup packet Err\n"); - if (unlikely(!hpriv->done)) - dev_err(dev, "setup err happen without necessary data\n"); - else - complete(hpriv->done); /* see usbhsh_urb_enqueue() */ + complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ return 0; } @@ -1221,8 +1227,18 @@ static int usbhsh_stop(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); struct device *dev = usbhs_priv_to_dev(priv); + /* + * disable irq callback + */ + mod->irq_attch = NULL; + mod->irq_dtch = NULL; + mod->irq_sack = NULL; + mod->irq_sign = NULL; + usbhs_irq_callback_update(priv, mod); + usb_remove_hcd(hcd); /* disable sys */ @@ -1235,7 +1251,7 @@ static int usbhsh_stop(struct usbhs_priv *priv) return 0; } -int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv) +int usbhs_mod_host_probe(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv; struct usb_hcd *hcd; @@ -1279,7 +1295,6 @@ int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv) hpriv->mod.stop = usbhsh_stop; hpriv->pipe_info = pipe_info; hpriv->pipe_size = pipe_size; - hpriv->done = NULL; usbhsh_req_list_init(hpriv); usbhsh_port_stat_init(hpriv); @@ -1299,7 +1314,7 @@ usbhs_mod_host_probe_err: return -ENOMEM; } -int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv) +int usbhs_mod_host_remove(struct usbhs_priv *priv) { struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5cdb9d912275..18e875b92e00 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -42,7 +42,7 @@ static int debug; * Version information */ -#define DRIVER_VERSION "v0.6" +#define DRIVER_VERSION "v0.7" #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>" #define DRIVER_DESC "USB ARK3116 serial/IrDA driver" #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA" @@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) goto err_out; } - /* setup termios */ - if (tty) - ark3116_set_termios(tty, port, NULL); - /* remove any data still left: also clears error state */ ark3116_read_reg(serial, UART_RX, buf); @@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) /* enable DMA */ ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT); + /* setup termios */ + if (tty) + ark3116_set_termios(tty, port, NULL); + err_out: kfree(buf); return result; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8fe034d2d3e7..bd4298bb6750 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2104,13 +2104,19 @@ static void ftdi_set_termios(struct tty_struct *tty, cflag = termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to - compare old_termios and tty->termios */ + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + /* Set number of data bits, parity, stop bits */ urb_value = 0; @@ -2151,6 +2157,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } /* Now do the baudrate */ +no_data_parity_stop_changes: if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2178,6 +2185,7 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 89ae1f65e1b1..d865878c9f97 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4511 0x14CC #define HUAWEI_PRODUCT_ETS1220 0x1803 #define HUAWEI_PRODUCT_E353 0x1506 +#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -316,6 +317,9 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC8710 0xfff1 #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff +#define ZTE_PRODUCT_MC2718 0xffe8 +#define ZTE_PRODUCT_AD3812 0xffeb +#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -468,6 +472,10 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CLU528 0x260D #define YUGA_PRODUCT_CLU526 0x260F +/* Viettel products */ +#define VIETTEL_VENDOR_ID 0x2262 +#define VIETTEL_PRODUCT_VT1000 0x0002 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -500,6 +508,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; +static const struct option_blacklist_info zte_ad3812_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info zte_mc2718_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info zte_mc2716_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3), +}; + static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -622,6 +642,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), @@ -1043,6 +1064,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ @@ -1141,6 +1168,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, + { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9083d1e616b4..fc2d66f7f4eb 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) }, { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 3d10d7f02072..c38b8c00c06f 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -145,10 +145,6 @@ #define ADLINK_VENDOR_ID 0x0b63 #define ADLINK_ND6530_PRODUCT_ID 0x6530 -/* WinChipHead USB->RS 232 adapter */ -#define WINCHIPHEAD_VENDOR_ID 0x4348 -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523 - /* SMART USB Serial Adapter */ #define SMART_VENDOR_ID 0x0b8c #define SMART_PRODUCT_ID 0x2303 diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 4dca3ef0668c..9fbe742343c6 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1762,10 +1762,9 @@ static int ms_scsi_write(struct us_data *us, struct scsi_cmnd *srb) result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1); } else { void *buf; - int offset; + int offset = 0; u16 PhyBlockAddr; u8 PageNum; - u32 result; u16 len, oldphy, newphy; buf = kmalloc(blenByte, GFP_KERNEL); diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index 93c1a4d86f51..82dd834709c7 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -59,7 +59,9 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) { - /* Pad the SCSI command with zeros out to 12 bytes + /* + * Pad the SCSI command with zeros out to 12 bytes. If the + * command already is 12 bytes or longer, leave it alone. * * NOTE: This only works because a scsi_cmnd struct field contains * a unsigned char cmnd[16], so we know we have storage available @@ -67,9 +69,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us) for (; srb->cmd_len<12; srb->cmd_len++) srb->cmnd[srb->cmd_len] = 0; - /* set command length to 12 bytes */ - srb->cmd_len = 12; - /* send the command to the transport layer */ usb_stor_invoke_transport(srb, us); } |