Merge 'akpm' patch series

* Merge akpm patch series: (122 commits)
  drivers/connector/cn_proc.c: remove unused local
  Documentation/SubmitChecklist: add RCU debug config options
  reiserfs: use hweight_long()
  reiserfs: use proper little-endian bitops
  pnpacpi: register disabled resources
  drivers/rtc/rtc-tegra.c: properly initialize spinlock
  drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
  drivers/rtc: add support for Qualcomm PMIC8xxx RTC
  drivers/rtc/rtc-s3c.c: support clock gating
  drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
  init: skip calibration delay if previously done
  misc/eeprom: add eeprom access driver for digsy_mtc board
  misc/eeprom: add driver for microwire 93xx46 EEPROMs
  checkpatch.pl: update $logFunctions
  checkpatch: make utf-8 test --strict
  checkpatch.pl: add ability to ignore various messages
  checkpatch: add a "prefer __aligned" check
  checkpatch: validate signature styles and To: and Cc: lines
  checkpatch: add __rcu as a sparse modifier
  checkpatch: suggest using min_t or max_t
  ...

Did this as a merge because of (trivial) conflicts in
 - Documentation/feature-removal-schedule.txt
 - arch/xtensa/include/asm/uaccess.h
that were just easier to fix up in the merge than in the patch series.

8 files changed, 1094 insertions, 3 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e349cd98bcf..0a4d86c6c4a4 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -245,8 +245,7 @@ config SGI_XP
 
 config CS5535_MFGPT
 	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
-	depends on PCI
-	depends on X86
+	depends on PCI && X86 && MFD_CS5535
 	default n
 	help
 	  This driver provides access to MFGPT functionality for other
@@ -490,6 +489,15 @@ config PCH_PHUB
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
 
+config USB_SWITCH_FSA9480
+	tristate "FSA9480 USB Switch"
+	depends on I2C
+	help
+	  The FSA9480 is a USB port accessory detector and switch.
+	  The FSA9480 is fully controlled using I2C and enables USB data,
+	  stereo and mono audio, video, microphone and UART data to use
+	  a common connector port.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 5f03172cc0b5..33282157bc3c 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -46,3 +46,4 @@ obj-y				+= ti-st/
 obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
 obj-y				+= lis3lv02d/
 obj-y				+= carma/
+obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 9118613af321..26cf12ca7f50 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -70,4 +70,29 @@ config EEPROM_93CX6
 
 	  If unsure, say N.
 
+config EEPROM_93XX46
+	tristate "Microwire EEPROM 93XX46 support"
+	depends on SPI && SYSFS
+	help
+	  Driver for the microwire EEPROM chipsets 93xx46x. The driver
+	  supports both read and write commands and also the command to
+	  erase the whole EEPROM.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called eeprom_93xx46.
+
+	  If unsure, say N.
+
+config EEPROM_DIGSY_MTC_CFG
+	bool "DigsyMTC display configuration EEPROMs device"
+	depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+	help
+	  This option enables access to display configuration EEPROMs
+	  on digsy_mtc board. You have to additionally select Microwire
+	  EEPROM 93XX46 driver. sysfs entries will be created for that
+	  EEPROM allowing to read/write the configuration data or to
+	  erase the whole EEPROM.
+
+	  If unsure, say N.
+
 endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index df3d68ffa9d1..fc1e81d29267 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_EEPROM_AT25)	+= at25.o
 obj-$(CONFIG_EEPROM_LEGACY)	+= eeprom.o
 obj-$(CONFIG_EEPROM_MAX6875)	+= max6875.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
+obj-$(CONFIG_EEPROM_93XX46)	+= eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
new file mode 100644
index 000000000000..66d9e1baeae5
--- /dev/null
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -0,0 +1,85 @@
+/*
+ * EEPROMs access control driver for display configuration EEPROMs
+ * on DigsyMTC board.
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/eeprom_93xx46.h>
+
+#define GPIO_EEPROM_CLK		216
+#define GPIO_EEPROM_CS		210
+#define GPIO_EEPROM_DI		217
+#define GPIO_EEPROM_DO		249
+#define GPIO_EEPROM_OE		255
+#define EE_SPI_BUS_NUM	1
+
+static void digsy_mtc_op_prepare(void *p)
+{
+	/* enable */
+	gpio_set_value(GPIO_EEPROM_OE, 0);
+}
+
+static void digsy_mtc_op_finish(void *p)
+{
+	/* disable */
+	gpio_set_value(GPIO_EEPROM_OE, 1);
+}
+
+struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
+	.flags		= EE_ADDR8,
+	.prepare	= digsy_mtc_op_prepare,
+	.finish		= digsy_mtc_op_finish,
+};
+
+static struct spi_gpio_platform_data eeprom_spi_gpio_data = {
+	.sck		= GPIO_EEPROM_CLK,
+	.mosi		= GPIO_EEPROM_DI,
+	.miso		= GPIO_EEPROM_DO,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device digsy_mtc_eeprom = {
+	.name	= "spi_gpio",
+	.id	= EE_SPI_BUS_NUM,
+	.dev	= {
+		.platform_data	= &eeprom_spi_gpio_data,
+	},
+};
+
+static struct spi_board_info digsy_mtc_eeprom_info[] __initdata = {
+	{
+		.modalias		= "93xx46",
+		.max_speed_hz		= 1000000,
+		.bus_num		= EE_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_0,
+		.controller_data	= (void *)GPIO_EEPROM_CS,
+		.platform_data		= &digsy_mtc_eeprom_data,
+	},
+};
+
+static int __init digsy_mtc_eeprom_devices_init(void)
+{
+	int ret;
+
+	ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH,
+				"93xx46 EEPROMs OE");
+	if (ret) {
+		pr_err("can't request gpio %d\n", GPIO_EEPROM_OE);
+		return ret;
+	}
+	spi_register_board_info(digsy_mtc_eeprom_info,
+				ARRAY_SIZE(digsy_mtc_eeprom_info));
+	return platform_device_register(&digsy_mtc_eeprom);
+}
+device_initcall(digsy_mtc_eeprom_devices_init);
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
new file mode 100644
index 000000000000..0c7ebb1e19e5
--- /dev/null
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -0,0 +1,410 @@
+/*
+ * Driver for 93xx46 EEPROMs
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/eeprom_93xx46.h>
+
+#define OP_START	0x4
+#define OP_WRITE	(OP_START | 0x1)
+#define OP_READ		(OP_START | 0x2)
+#define ADDR_EWDS	0x00
+#define ADDR_ERAL	0x20
+#define ADDR_EWEN	0x30
+
+struct eeprom_93xx46_dev {
+	struct spi_device *spi;
+	struct eeprom_93xx46_platform_data *pdata;
+	struct bin_attribute bin;
+	struct mutex lock;
+	int addrlen;
+};
+
+static ssize_t
+eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct eeprom_93xx46_dev *edev;
+	struct device *dev;
+	struct spi_message m;
+	struct spi_transfer t[2];
+	int bits, ret;
+	u16 cmd_addr;
+
+	dev = container_of(kobj, struct device, kobj);
+	edev = dev_get_drvdata(dev);
+
+	if (unlikely(off >= edev->bin.size))
+		return 0;
+	if ((off + count) > edev->bin.size)
+		count = edev->bin.size - off;
+	if (unlikely(!count))
+		return count;
+
+	cmd_addr = OP_READ << edev->addrlen;
+
+	if (edev->addrlen == 7) {
+		cmd_addr |= off & 0x7f;
+		bits = 10;
+	} else {
+		cmd_addr |= off & 0x3f;
+		bits = 9;
+	}
+
+	dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
+		cmd_addr, edev->spi->max_speed_hz);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = (char *)&cmd_addr;
+	t[0].len = 2;
+	t[0].bits_per_word = bits;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = count;
+	t[1].bits_per_word = 8;
+	spi_message_add_tail(&t[1], &m);
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait at least Tcsl ns */
+	ndelay(250);
+	if (ret) {
+		dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
+			count, (int)off, ret);
+	}
+
+	if (edev->pdata->finish)
+		edev->pdata->finish(edev);
+
+	mutex_unlock(&edev->lock);
+	return ret ? : count;
+}
+
+static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
+{
+	struct spi_message m;
+	struct spi_transfer t;
+	int bits, ret;
+	u16 cmd_addr;
+
+	cmd_addr = OP_START << edev->addrlen;
+	if (edev->addrlen == 7) {
+		cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1;
+		bits = 10;
+	} else {
+		cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS);
+		bits = 9;
+	}
+
+	dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr);
+
+	spi_message_init(&m);
+	memset(&t, 0, sizeof(t));
+
+	t.tx_buf = &cmd_addr;
+	t.len = 2;
+	t.bits_per_word = bits;
+	spi_message_add_tail(&t, &m);
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait at least Tcsl ns */
+	ndelay(250);
+	if (ret)
+		dev_err(&edev->spi->dev, "erase/write %sable error %d\n",
+			is_on ? "en" : "dis", ret);
+
+	if (edev->pdata->finish)
+		edev->pdata->finish(edev);
+
+	mutex_unlock(&edev->lock);
+	return ret;
+}
+
+static ssize_t
+eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
+			 const char *buf, unsigned off)
+{
+	struct spi_message m;
+	struct spi_transfer t[2];
+	int bits, data_len, ret;
+	u16 cmd_addr;
+
+	cmd_addr = OP_WRITE << edev->addrlen;
+
+	if (edev->addrlen == 7) {
+		cmd_addr |= off & 0x7f;
+		bits = 10;
+		data_len = 1;
+	} else {
+		cmd_addr |= off & 0x3f;
+		bits = 9;
+		data_len = 2;
+	}
+
+	dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = (char *)&cmd_addr;
+	t[0].len = 2;
+	t[0].bits_per_word = bits;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = data_len;
+	t[1].bits_per_word = 8;
+	spi_message_add_tail(&t[1], &m);
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait program cycle time Twc ms */
+	mdelay(6);
+	return ret;
+}
+
+static ssize_t
+eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj,
+			struct bin_attribute *bin_attr,
+			char *buf, loff_t off, size_t count)
+{
+	struct eeprom_93xx46_dev *edev;
+	struct device *dev;
+	int i, ret, step = 1;
+
+	dev = container_of(kobj, struct device, kobj);
+	edev = dev_get_drvdata(dev);
+
+	if (unlikely(off >= edev->bin.size))
+		return 0;
+	if ((off + count) > edev->bin.size)
+		count = edev->bin.size - off;
+	if (unlikely(!count))
+		return count;
+
+	/* only write even number of bytes on 16-bit devices */
+	if (edev->addrlen == 6) {
+		step = 2;
+		count &= ~1;
+	}
+
+	/* erase/write enable */
+	ret = eeprom_93xx46_ew(edev, 1);
+	if (ret)
+		return ret;
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	for (i = 0; i < count; i += step) {
+		ret = eeprom_93xx46_write_word(edev, &buf[i], off + i);
+		if (ret) {
+			dev_err(&edev->spi->dev, "write failed at %d: %d\n",
+				(int)off + i, ret);
+			break;
+		}
+	}
+
+	if (edev->pdata->finish)
+		edev->pdata->finish(edev);
+
+	mutex_unlock(&edev->lock);
+
+	/* erase/write disable */
+	eeprom_93xx46_ew(edev, 0);
+	return ret ? : count;
+}
+
+static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
+{
+	struct eeprom_93xx46_platform_data *pd = edev->pdata;
+	struct spi_message m;
+	struct spi_transfer t;
+	int bits, ret;
+	u16 cmd_addr;
+
+	cmd_addr = OP_START << edev->addrlen;
+	if (edev->addrlen == 7) {
+		cmd_addr |= ADDR_ERAL << 1;
+		bits = 10;
+	} else {
+		cmd_addr |= ADDR_ERAL;
+		bits = 9;
+	}
+
+	spi_message_init(&m);
+	memset(&t, 0, sizeof(t));
+
+	t.tx_buf = &cmd_addr;
+	t.len = 2;
+	t.bits_per_word = bits;
+	spi_message_add_tail(&t, &m);
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	ret = spi_sync(edev->spi, &m);
+	if (ret)
+		dev_err(&edev->spi->dev, "erase error %d\n", ret);
+	/* have to wait erase cycle time Tec ms */
+	mdelay(6);
+
+	if (pd->finish)
+		pd->finish(edev);
+
+	mutex_unlock(&edev->lock);
+	return ret;
+}
+
+static ssize_t eeprom_93xx46_store_erase(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev);
+	int erase = 0, ret;
+
+	sscanf(buf, "%d", &erase);
+	if (erase) {
+		ret = eeprom_93xx46_ew(edev, 1);
+		if (ret)
+			return ret;
+		ret = eeprom_93xx46_eral(edev);
+		if (ret)
+			return ret;
+		ret = eeprom_93xx46_ew(edev, 0);
+		if (ret)
+			return ret;
+	}
+	return count;
+}
+static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
+
+static int __devinit eeprom_93xx46_probe(struct spi_device *spi)
+{
+	struct eeprom_93xx46_platform_data *pd;
+	struct eeprom_93xx46_dev *edev;
+	int err;
+
+	pd = spi->dev.platform_data;
+	if (!pd) {
+		dev_err(&spi->dev, "missing platform data\n");
+		return -ENODEV;
+	}
+
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+
+	if (pd->flags & EE_ADDR8)
+		edev->addrlen = 7;
+	else if (pd->flags & EE_ADDR16)
+		edev->addrlen = 6;
+	else {
+		dev_err(&spi->dev, "unspecified address type\n");
+		err = -EINVAL;
+		goto fail;
+	}
+
+	mutex_init(&edev->lock);
+
+	edev->spi = spi_dev_get(spi);
+	edev->pdata = pd;
+
+	sysfs_bin_attr_init(&edev->bin);
+	edev->bin.attr.name = "eeprom";
+	edev->bin.attr.mode = S_IRUSR;
+	edev->bin.read = eeprom_93xx46_bin_read;
+	edev->bin.size = 128;
+	if (!(pd->flags & EE_READONLY)) {
+		edev->bin.write = eeprom_93xx46_bin_write;
+		edev->bin.attr.mode |= S_IWUSR;
+	}
+
+	err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin);
+	if (err)
+		goto fail;
+
+	dev_info(&spi->dev, "%d-bit eeprom %s\n",
+		(pd->flags & EE_ADDR8) ? 8 : 16,
+		(pd->flags & EE_READONLY) ? "(readonly)" : "");
+
+	if (!(pd->flags & EE_READONLY)) {
+		if (device_create_file(&spi->dev, &dev_attr_erase))
+			dev_err(&spi->dev, "can't create erase interface\n");
+	}
+
+	dev_set_drvdata(&spi->dev, edev);
+	return 0;
+fail:
+	kfree(edev);
+	return err;
+}
+
+static int __devexit eeprom_93xx46_remove(struct spi_device *spi)
+{
+	struct eeprom_93xx46_dev *edev = dev_get_drvdata(&spi->dev);
+
+	if (!(edev->pdata->flags & EE_READONLY))
+		device_remove_file(&spi->dev, &dev_attr_erase);
+
+	sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(edev);
+	return 0;
+}
+
+static struct spi_driver eeprom_93xx46_driver = {
+	.driver = {
+		.name	= "93xx46",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= eeprom_93xx46_probe,
+	.remove		= __devexit_p(eeprom_93xx46_remove),
+};
+
+static int __init eeprom_93xx46_init(void)
+{
+	return spi_register_driver(&eeprom_93xx46_driver);
+}
+module_init(eeprom_93xx46_init);
+
+static void __exit eeprom_93xx46_exit(void)
+{
+	spi_unregister_driver(&eeprom_93xx46_driver);
+}
+module_exit(eeprom_93xx46_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_ALIAS("spi:93xx46");
diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c
new file mode 100644
index 000000000000..5325a7e70dcf
--- /dev/null
+++ b/drivers/misc/fsa9480.c
@@ -0,0 +1,557 @@
+/*
+ * fsa9480.c - FSA9480 micro USB switch device driver
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Wonguk Jeong <wonguk.jeong@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/fsa9480.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+/* FSA9480 I2C registers */
+#define FSA9480_REG_DEVID		0x01
+#define FSA9480_REG_CTRL		0x02
+#define FSA9480_REG_INT1		0x03
+#define FSA9480_REG_INT2		0x04
+#define FSA9480_REG_INT1_MASK		0x05
+#define FSA9480_REG_INT2_MASK		0x06
+#define FSA9480_REG_ADC			0x07
+#define FSA9480_REG_TIMING1		0x08
+#define FSA9480_REG_TIMING2		0x09
+#define FSA9480_REG_DEV_T1		0x0a
+#define FSA9480_REG_DEV_T2		0x0b
+#define FSA9480_REG_BTN1		0x0c
+#define FSA9480_REG_BTN2		0x0d
+#define FSA9480_REG_CK			0x0e
+#define FSA9480_REG_CK_INT1		0x0f
+#define FSA9480_REG_CK_INT2		0x10
+#define FSA9480_REG_CK_INTMASK1		0x11
+#define FSA9480_REG_CK_INTMASK2		0x12
+#define FSA9480_REG_MANSW1		0x13
+#define FSA9480_REG_MANSW2		0x14
+
+/* Control */
+#define CON_SWITCH_OPEN		(1 << 4)
+#define CON_RAW_DATA		(1 << 3)
+#define CON_MANUAL_SW		(1 << 2)
+#define CON_WAIT		(1 << 1)
+#define CON_INT_MASK		(1 << 0)
+#define CON_MASK		(CON_SWITCH_OPEN | CON_RAW_DATA | \
+				CON_MANUAL_SW | CON_WAIT)
+
+/* Device Type 1 */
+#define DEV_USB_OTG		(1 << 7)
+#define DEV_DEDICATED_CHG	(1 << 6)
+#define DEV_USB_CHG		(1 << 5)
+#define DEV_CAR_KIT		(1 << 4)
+#define DEV_UART		(1 << 3)
+#define DEV_USB			(1 << 2)
+#define DEV_AUDIO_2		(1 << 1)
+#define DEV_AUDIO_1		(1 << 0)
+
+#define DEV_T1_USB_MASK		(DEV_USB_OTG | DEV_USB)
+#define DEV_T1_UART_MASK	(DEV_UART)
+#define DEV_T1_CHARGER_MASK	(DEV_DEDICATED_CHG | DEV_USB_CHG)
+
+/* Device Type 2 */
+#define DEV_AV			(1 << 6)
+#define DEV_TTY			(1 << 5)
+#define DEV_PPD			(1 << 4)
+#define DEV_JIG_UART_OFF	(1 << 3)
+#define DEV_JIG_UART_ON		(1 << 2)
+#define DEV_JIG_USB_OFF		(1 << 1)
+#define DEV_JIG_USB_ON		(1 << 0)
+
+#define DEV_T2_USB_MASK		(DEV_JIG_USB_OFF | DEV_JIG_USB_ON)
+#define DEV_T2_UART_MASK	(DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
+#define DEV_T2_JIG_MASK		(DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \
+				DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
+
+/*
+ * Manual Switch
+ * D- [7:5] / D+ [4:2]
+ * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO
+ */
+#define SW_VAUDIO		((4 << 5) | (4 << 2))
+#define SW_UART			((3 << 5) | (3 << 2))
+#define SW_AUDIO		((2 << 5) | (2 << 2))
+#define SW_DHOST		((1 << 5) | (1 << 2))
+#define SW_AUTO			((0 << 5) | (0 << 2))
+
+/* Interrupt 1 */
+#define INT_DETACH		(1 << 1)
+#define INT_ATTACH		(1 << 0)
+
+struct fsa9480_usbsw {
+	struct i2c_client		*client;
+	struct fsa9480_platform_data	*pdata;
+	int				dev1;
+	int				dev2;
+	int				mansw;
+};
+
+static struct fsa9480_usbsw *chip;
+
+static int fsa9480_write_reg(struct i2c_client *client,
+		int reg, int value)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, value);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int fsa9480_read_reg(struct i2c_client *client, int reg)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int fsa9480_read_irq(struct i2c_client *client, int *value)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client,
+			FSA9480_REG_INT1, 2, (u8 *)value);
+	*value &= 0xffff;
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static void fsa9480_set_switch(const char *buf)
+{
+	struct fsa9480_usbsw *usbsw = chip;
+	struct i2c_client *client = usbsw->client;
+	unsigned int value;
+	unsigned int path = 0;
+
+	value = fsa9480_read_reg(client, FSA9480_REG_CTRL);
+
+	if (!strncmp(buf, "VAUDIO", 6)) {
+		path = SW_VAUDIO;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "UART", 4)) {
+		path = SW_UART;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "AUDIO", 5)) {
+		path = SW_AUDIO;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "DHOST", 5)) {
+		path = SW_DHOST;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "AUTO", 4)) {
+		path = SW_AUTO;
+		value |= CON_MANUAL_SW;
+	} else {
+		printk(KERN_ERR "Wrong command\n");
+		return;
+	}
+
+	usbsw->mansw = path;
+	fsa9480_write_reg(client, FSA9480_REG_MANSW1, path);
+	fsa9480_write_reg(client, FSA9480_REG_CTRL, value);
+}
+
+static ssize_t fsa9480_get_switch(char *buf)
+{
+	struct fsa9480_usbsw *usbsw = chip;
+	struct i2c_client *client = usbsw->client;
+	unsigned int value;
+
+	value = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
+
+	if (value == SW_VAUDIO)
+		return sprintf(buf, "VAUDIO\n");
+	else if (value == SW_UART)
+		return sprintf(buf, "UART\n");
+	else if (value == SW_AUDIO)
+		return sprintf(buf, "AUDIO\n");
+	else if (value == SW_DHOST)
+		return sprintf(buf, "DHOST\n");
+	else if (value == SW_AUTO)
+		return sprintf(buf, "AUTO\n");
+	else
+		return sprintf(buf, "%x", value);
+}
+
+static ssize_t fsa9480_show_device(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct fsa9480_usbsw *usbsw = dev_get_drvdata(dev);
+	struct i2c_client *client = usbsw->client;
+	int dev1, dev2;
+
+	dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+	dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+
+	if (!dev1 && !dev2)
+		return sprintf(buf, "NONE\n");
+
+	/* USB */
+	if (dev1 & DEV_T1_USB_MASK || dev2 & DEV_T2_USB_MASK)
+		return sprintf(buf, "USB\n");
+
+	/* UART */
+	if (dev1 & DEV_T1_UART_MASK || dev2 & DEV_T2_UART_MASK)
+		return sprintf(buf, "UART\n");
+
+	/* CHARGER */
+	if (dev1 & DEV_T1_CHARGER_MASK)
+		return sprintf(buf, "CHARGER\n");
+
+	/* JIG */
+	if (dev2 & DEV_T2_JIG_MASK)
+		return sprintf(buf, "JIG\n");
+
+	return sprintf(buf, "UNKNOWN\n");
+}
+
+static ssize_t fsa9480_show_manualsw(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return fsa9480_get_switch(buf);
+
+}
+
+static ssize_t fsa9480_set_manualsw(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	fsa9480_set_switch(buf);
+
+	return count;
+}
+
+static DEVICE_ATTR(device, S_IRUGO, fsa9480_show_device, NULL);
+static DEVICE_ATTR(switch, S_IRUGO | S_IWUSR,
+		fsa9480_show_manualsw, fsa9480_set_manualsw);
+
+static struct attribute *fsa9480_attributes[] = {
+	&dev_attr_device.attr,
+	&dev_attr_switch.attr,
+	NULL
+};
+
+static const struct attribute_group fsa9480_group = {
+	.attrs = fsa9480_attributes,
+};
+
+static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw, int intr)
+{
+	int val1, val2, ctrl;
+	struct fsa9480_platform_data *pdata = usbsw->pdata;
+	struct i2c_client *client = usbsw->client;
+
+	val1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+	val2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+	ctrl = fsa9480_read_reg(client, FSA9480_REG_CTRL);
+
+	dev_info(&client->dev, "intr: 0x%x, dev1: 0x%x, dev2: 0x%x\n",
+			intr, val1, val2);
+
+	if (!intr)
+		goto out;
+
+	if (intr & INT_ATTACH) {	/* Attached */
+		/* USB */
+		if (val1 & DEV_T1_USB_MASK || val2 & DEV_T2_USB_MASK) {
+			if (pdata->usb_cb)
+				pdata->usb_cb(FSA9480_ATTACHED);
+
+			if (usbsw->mansw) {
+				fsa9480_write_reg(client,
+					FSA9480_REG_MANSW1, usbsw->mansw);
+			}
+		}
+
+		/* UART */
+		if (val1 & DEV_T1_UART_MASK || val2 & DEV_T2_UART_MASK) {
+			if (pdata->uart_cb)
+				pdata->uart_cb(FSA9480_ATTACHED);
+
+			if (!(ctrl & CON_MANUAL_SW)) {
+				fsa9480_write_reg(client,
+					FSA9480_REG_MANSW1, SW_UART);
+			}
+		}
+
+		/* CHARGER */
+		if (val1 & DEV_T1_CHARGER_MASK) {
+			if (pdata->charger_cb)
+				pdata->charger_cb(FSA9480_ATTACHED);
+		}
+
+		/* JIG */
+		if (val2 & DEV_T2_JIG_MASK) {
+			if (pdata->jig_cb)
+				pdata->jig_cb(FSA9480_ATTACHED);
+		}
+	} else if (intr & INT_DETACH) {	/* Detached */
+		/* USB */
+		if (usbsw->dev1 & DEV_T1_USB_MASK ||
+			usbsw->dev2 & DEV_T2_USB_MASK) {
+			if (pdata->usb_cb)
+				pdata->usb_cb(FSA9480_DETACHED);
+		}
+
+		/* UART */
+		if (usbsw->dev1 & DEV_T1_UART_MASK ||
+			usbsw->dev2 & DEV_T2_UART_MASK) {
+			if (pdata->uart_cb)
+				pdata->uart_cb(FSA9480_DETACHED);
+		}
+
+		/* CHARGER */
+		if (usbsw->dev1 & DEV_T1_CHARGER_MASK) {
+			if (pdata->charger_cb)
+				pdata->charger_cb(FSA9480_DETACHED);
+		}
+
+		/* JIG */
+		if (usbsw->dev2 & DEV_T2_JIG_MASK) {
+			if (pdata->jig_cb)
+				pdata->jig_cb(FSA9480_DETACHED);
+		}
+	}
+
+	usbsw->dev1 = val1;
+	usbsw->dev2 = val2;
+
+out:
+	ctrl &= ~CON_INT_MASK;
+	fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
+}
+
+static irqreturn_t fsa9480_irq_handler(int irq, void *data)
+{
+	struct fsa9480_usbsw *usbsw = data;
+	struct i2c_client *client = usbsw->client;
+	int intr;
+
+	/* clear interrupt */
+	fsa9480_read_irq(client, &intr);
+
+	/* device detection */
+	fsa9480_detect_dev(usbsw, intr);
+
+	return IRQ_HANDLED;
+}
+
+static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw)
+{
+	struct fsa9480_platform_data *pdata = usbsw->pdata;
+	struct i2c_client *client = usbsw->client;
+	int ret;
+	int intr;
+	unsigned int ctrl = CON_MASK;
+
+	/* clear interrupt */
+	fsa9480_read_irq(client, &intr);
+
+	/* unmask interrupt (attach/detach only) */
+	fsa9480_write_reg(client, FSA9480_REG_INT1_MASK, 0xfc);
+	fsa9480_write_reg(client, FSA9480_REG_INT2_MASK, 0x1f);
+
+	usbsw->mansw = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
+
+	if (usbsw->mansw)
+		ctrl &= ~CON_MANUAL_SW;	/* Manual Switching Mode */
+
+	fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
+
+	if (pdata && pdata->cfg_gpio)
+		pdata->cfg_gpio();
+
+	if (client->irq) {
+		ret = request_threaded_irq(client->irq, NULL,
+				fsa9480_irq_handler,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"fsa9480 micro USB", usbsw);
+		if (ret) {
+			dev_err(&client->dev, "failed to reqeust IRQ\n");
+			return ret;
+		}
+
+		device_init_wakeup(&client->dev, pdata->wakeup);
+	}
+
+	return 0;
+}
+
+static int __devinit fsa9480_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct fsa9480_usbsw *usbsw;
+	int ret = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
+	if (!usbsw) {
+		dev_err(&client->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	usbsw->client = client;
+	usbsw->pdata = client->dev.platform_data;
+
+	chip = usbsw;
+
+	i2c_set_clientdata(client, usbsw);
+
+	ret = fsa9480_irq_init(usbsw);
+	if (ret)
+		goto fail1;
+
+	ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
+	if (ret) {
+		dev_err(&client->dev,
+				"failed to create fsa9480 attribute group\n");
+		goto fail2;
+	}
+
+	/* ADC Detect Time: 500ms */
+	fsa9480_write_reg(client, FSA9480_REG_TIMING1, 0x6);
+
+	if (chip->pdata->reset_cb)
+		chip->pdata->reset_cb();
+
+	/* device detection */
+	fsa9480_detect_dev(usbsw, INT_ATTACH);
+
+	pm_runtime_set_active(&client->dev);
+
+	return 0;
+
+fail2:
+	if (client->irq)
+		free_irq(client->irq, NULL);
+fail1:
+	i2c_set_clientdata(client, NULL);
+	kfree(usbsw);
+	return ret;
+}
+
+static int __devexit fsa9480_remove(struct i2c_client *client)
+{
+	struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+	if (client->irq)
+		free_irq(client->irq, NULL);
+	i2c_set_clientdata(client, NULL);
+
+	sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
+	device_init_wakeup(&client->dev, 0);
+	kfree(usbsw);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int fsa9480_suspend(struct i2c_client *client, pm_message_t state)
+{
+	struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+	struct fsa9480_platform_data *pdata = usbsw->pdata;
+
+	if (device_may_wakeup(&client->dev) && client->irq)
+		enable_irq_wake(client->irq);
+
+	if (pdata->usb_power)
+		pdata->usb_power(0);
+
+	return 0;
+}
+
+static int fsa9480_resume(struct i2c_client *client)
+{
+	struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+	int dev1, dev2;
+
+	if (device_may_wakeup(&client->dev) && client->irq)
+		disable_irq_wake(client->irq);
+
+	/*
+	 * Clear Pending interrupt. Note that detect_dev does what
+	 * the interrupt handler does. So, we don't miss pending and
+	 * we reenable interrupt if there is one.
+	 */
+	fsa9480_read_reg(client, FSA9480_REG_INT1);
+	fsa9480_read_reg(client, FSA9480_REG_INT2);
+
+	dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+	dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+
+	/* device detection */
+	fsa9480_detect_dev(usbsw, (dev1 || dev2) ? INT_ATTACH : INT_DETACH);
+
+	return 0;
+}
+
+#else
+
+#define fsa9480_suspend NULL
+#define fsa9480_resume NULL
+
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id fsa9480_id[] = {
+	{"fsa9480", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, fsa9480_id);
+
+static struct i2c_driver fsa9480_i2c_driver = {
+	.driver = {
+		.name = "fsa9480",
+	},
+	.probe = fsa9480_probe,
+	.remove = __devexit_p(fsa9480_remove),
+	.resume = fsa9480_resume,
+	.suspend = fsa9480_suspend,
+	.id_table = fsa9480_id,
+};
+
+static int __init fsa9480_init(void)
+{
+	return i2c_add_driver(&fsa9480_i2c_driver);
+}
+module_init(fsa9480_init);
+
+static void __exit fsa9480_exit(void)
+{
+	i2c_del_driver(&fsa9480_i2c_driver);
+}
+module_exit(fsa9480_exit);
+
+MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
+MODULE_DESCRIPTION("FSA9480 USB Switch driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 5fe79df44838..01eb67b4871a 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -686,6 +686,8 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 	}
 
 	if (id->driver_data == 1) { /* EG20T PCH */
+		const char *board_name;
+
 		retval = sysfs_create_file(&pdev->dev.kobj,
 					   &dev_attr_pch_mac.attr);
 		if (retval)
@@ -701,7 +703,8 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 					       CLKCFG_CANCLK_MASK);
 
 		/* quirk for CM-iTC board */
-		if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+		board_name = dmi_get_system_info(DMI_BOARD_NAME);
+		if (board_name && strstr(board_name, "CM-iTC"))
 			pch_phub_read_modify_write_reg(chip,
 						(unsigned int)CLKCFG_REG_OFFSET,
 						CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV |