1 files changed, 239 insertions, 0 deletions
diff --git a/build-android/test_APK.sh b/build-android/test_APK.sh
new file mode 100755
index 00000000..801b16fa
--- /dev/null
+++ b/build-android/test_APK.sh
@@ -0,0 +1,239 @@
+#!/bin/bash
+
+# Copyright 2017 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# Parse parameters
+#
+
+function printUsage {
+   echo "Supported parameters are:"
+   echo "    -p|--platform <platform> (optional)"
+   echo "    -f|--filter <gtest filter list> (optional)"
+   echo "    -s|--serial <target device serial number> (optional)"
+   echo
+   echo "i.e. ${0##*/} -p <platform> -f <test filter> -s <serial number>"
+   exit 1
+}
+
+if [[ $(($# % 2)) -ne 0 ]]
+then
+    echo Parameters must be provided in pairs.
+    echo parameter count = $#
+    echo
+    printUsage
+    exit 1
+fi
+
+while [[ $# -gt 0 ]]
+do
+    case $1 in
+        -p|--platform)
+            platform="$2"
+            shift 2
+            ;;
+        -f|--filter)
+            filter="$2"
+            shift 2
+            ;;
+        -s|--serial)
+            serial="$2"
+            shift 2
+            ;;
+        -*)
+            # unknown option
+            echo Unknown option: $1
+            echo
+            printUsage
+            exit 1
+            ;;
+    esac
+done
+
+if [[ $serial ]]; then
+    serialFlag="-s $serial"
+    if [[ $(adb devices) != *"$serial"* ]]
+    then
+        echo Device not found: "${serial}"
+        echo
+        printUsage
+        exit 1
+    fi
+else
+    echo Using device $(adb get-serialno)
+fi
+
+if [[ -z $platform ]]
+then
+    echo No platform specified.
+    platform="UnspecifiedPlatform"
+fi
+
+if [[ -z $filter ]]
+then
+    echo No filter specified, running all tests.
+    filter="*"
+fi
+
+if [[ $platform ]]; then echo platform = "${platform}"; fi
+if [[ $filter ]]; then echo filter = "${filter}"; fi
+if [[ $serial ]]; then echo serial = "${serial}"; fi
+
+set -ev
+
+#
+# Start up
+#
+
+# Wake up the device
+adb $serialFlag shell input keyevent "KEYCODE_MENU"
+adb $serialFlag shell input keyevent "KEYCODE_HOME"
+
+# Grab our Android test mutex
+# Wait for any existing test runs on the devices
+
+# Blow away the lock if tests run too long, avoiding infinite loop
+lock_seconds=1200                                # Duration in seconds.
+lock_end_time=$(( $(date +%s) + lock_seconds ))  # Calculate end time.
+
+until mkdir /var/tmp/VkLayerValidationTests.$serial.lock
+do
+    sleep 5
+    echo "Waiting for existing Android test to complete on $serial"
+
+    if [ $(date +%s) -gt $lock_end_time ]
+    then
+        echo "Lock timeout reached: $lock_seconds seconds"
+        echo "Deleting /var/tmp/VkLayerValidationTests.$serial.lock"
+        rm -r /var/tmp/VkLayerValidationTests.$serial.lock
+    fi
+done
+
+# Clean up our lock on any exit condition
+function finish {
+   rm -r /var/tmp/VkLayerValidationTests.$serial.lock
+}
+trap finish EXIT
+
+# Clear the log
+adb $serialFlag logcat -c
+
+# Ensure any previous activity has stopped, otherwise it won't run tests
+adb $serialFlag shell am force-stop com.example.VulkanLayerValidationTests
+
+# Remove any existing APK that may have been installed from another host
+# Disable exit on error in case the APK is not present
+set +e
+adb $serialFlag shell pm list packages | grep com.example.VulkanLayerValidationTests
+if [ $? -eq 0 ]
+then
+    adb $serialFlag uninstall com.example.VulkanLayerValidationTests
+fi
+# Re-enable exit on error
+set -e
+
+# Install the current build
+adb $serialFlag install -r bin/VulkanLayerValidationTests.apk
+
+# Kick off the tests with known expection list
+adb $serialFlag shell am start -a android.intent.action.MAIN -c android-intent.category.LAUNCH -n com.example.VulkanLayerValidationTests/android.app.NativeActivity --es args --gtest_filter="${filter}"
+
+#
+# Scrape the log until we get pass/fail/crash
+#
+
+# The following loop will give tests 20 minutes to pass/fail/crash
+seconds=1200                          # Duration in seconds.
+endTime=$(( $(date +%s) + seconds ))  # Calculate end time.
+
+exitCode=-1;
+
+# Disable exit on error, we expect grep to fail multiple times in this loop
+set +e
+
+while [ $(date +%s) -lt $endTime ]; do  # Loop until interval has elapsed.
+
+    # The following line is printed from android_main on success
+    adb $serialFlag logcat -d | grep "==== Tests PASSED ===="
+    if [ $? -eq 0 ]
+    then
+        echo VulkanLayerValidationTests PASSED!
+        exitCode=0
+        break
+    fi
+
+    # The following line is printed from android_main on failure
+    adb $serialFlag logcat -d | grep "==== Tests FAILED ===="
+    if [ $? -eq 0 ]
+    then
+        echo VulkanLayerValidationTests FAILED!
+        exitCode=1
+        break
+    fi
+
+    # developer.android.com recommends searching for the following string to detect native crash
+    adb $serialFlag logcat -d | grep "\*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\*"
+    if [ $? -eq 0 ]
+    then
+        exitCode=2
+        echo VulkanLayerValidationTests CRASHED!
+        break
+    fi
+
+    sleep 5
+
+done
+
+# Re-enable exit on error
+set -e
+
+if [ $exitCode -eq -1 ]
+then
+    echo "VulkanLayerValidationTests hasn't completed in $seconds seconds. Script exiting."
+fi
+
+#
+# Cleanup
+#
+
+# Return to home screen to clear any error pop-ups
+adb $serialFlag shell input keyevent "KEYCODE_HOME"
+
+# Stop the activity
+adb $serialFlag shell am force-stop com.example.VulkanLayerValidationTests
+
+today=$(date +%Y-%m-%d.%H:%M:%S)
+outFile="VulkanLayerValidationTests.$platform.$today.out.txt"
+errFile="VulkanLayerValidationTests.$platform.$today.err.txt"
+adb $serialFlag pull /sdcard/Android/data/com.example.VulkanLayerValidationTests/files/out.txt VulkanLayerValidationTests.$platform.$today.out.txt
+adb $serialFlag pull /sdcard/Android/data/com.example.VulkanLayerValidationTests/files/err.txt VulkanLayerValidationTests.$platform.$today.err.txt
+
+if [ -f $outFile ]; then
+    echo $outFile size $(wc -c < $outFile)
+fi
+
+if [ -f $errFile ]; then
+    echo $errFile size $(wc -c < $errFile)
+fi
+
+echo
+echo ===== Dumping logcat of VulkanLayerValidationTests =====
+echo If the test is crashing, be sure to inspect full log for complete stack trace.
+echo "adb $serialFlag logcat -d | grep VulkanLayerValidationTests"
+echo ========================================================
+echo
+adb $serialFlag logcat -d | grep VulkanLayerValidationTests
+
+exit $exitCode