From dc99065b5f97cc0410f88e3f90c7440531a55f9f Mon Sep 17 00:00:00 2001 From: bellard Date: Wed, 19 Mar 2003 00:00:28 +0000 Subject: added flags computation optimization git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@34 c046a42c-6fe2-441c-8c8c-71466251a162 --- dis-asm.h | 237 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 237 insertions(+) create mode 100644 dis-asm.h (limited to 'dis-asm.h') diff --git a/dis-asm.h b/dis-asm.h new file mode 100644 index 000000000..bd7e47844 --- /dev/null +++ b/dis-asm.h @@ -0,0 +1,237 @@ +/* Interface between the opcode library and its callers. + Written by Cygnus Support, 1993. + + The opcode library (libopcodes.a) provides instruction decoders for + a large variety of instruction sets, callable with an identical + interface, for making instruction-processing programs more independent + of the instruction set being processed. */ + +#ifndef DIS_ASM_H +#define DIS_ASM_H + +#include +#include "bfd.h" + +typedef int (*fprintf_ftype) PARAMS((FILE*, const char*, ...)); + +enum dis_insn_type { + dis_noninsn, /* Not a valid instruction */ + dis_nonbranch, /* Not a branch instruction */ + dis_branch, /* Unconditional branch */ + dis_condbranch, /* Conditional branch */ + dis_jsr, /* Jump to subroutine */ + dis_condjsr, /* Conditional jump to subroutine */ + dis_dref, /* Data reference instruction */ + dis_dref2 /* Two data references in instruction */ +}; + +/* This struct is passed into the instruction decoding routine, + and is passed back out into each callback. The various fields are used + for conveying information from your main routine into your callbacks, + for passing information into the instruction decoders (such as the + addresses of the callback functions), or for passing information + back from the instruction decoders to their callers. + + It must be initialized before it is first passed; this can be done + by hand, or using one of the initialization macros below. */ + +typedef struct disassemble_info { + fprintf_ftype fprintf_func; + FILE *stream; + PTR application_data; + + /* Target description. We could replace this with a pointer to the bfd, + but that would require one. There currently isn't any such requirement + so to avoid introducing one we record these explicitly. */ + /* The bfd_flavour. This can be bfd_target_unknown_flavour. */ + enum bfd_flavour flavour; + /* The bfd_arch value. */ + enum bfd_architecture arch; + /* The bfd_mach value. */ + unsigned long mach; + /* Endianness (for bi-endian cpus). Mono-endian cpus can ignore this. */ + enum bfd_endian endian; + + /* An array of pointers to symbols either at the location being disassembled + or at the start of the function being disassembled. The array is sorted + so that the first symbol is intended to be the one used. The others are + present for any misc. purposes. This is not set reliably, but if it is + not NULL, it is correct. */ + asymbol **symbols; + /* Number of symbols in array. */ + int num_symbols; + + /* For use by the disassembler. + The top 16 bits are reserved for public use (and are documented here). + The bottom 16 bits are for the internal use of the disassembler. */ + unsigned long flags; +#define INSN_HAS_RELOC 0x80000000 + PTR private_data; + + /* Function used to get bytes to disassemble. MEMADDR is the + address of the stuff to be disassembled, MYADDR is the address to + put the bytes in, and LENGTH is the number of bytes to read. + INFO is a pointer to this struct. + Returns an errno value or 0 for success. */ + int (*read_memory_func) + PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length, + struct disassemble_info *info)); + + /* Function which should be called if we get an error that we can't + recover from. STATUS is the errno value from read_memory_func and + MEMADDR is the address that we were trying to read. INFO is a + pointer to this struct. */ + void (*memory_error_func) + PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info)); + + /* Function called to print ADDR. */ + void (*print_address_func) + PARAMS ((bfd_vma addr, struct disassemble_info *info)); + + /* Function called to determine if there is a symbol at the given ADDR. + If there is, the function returns 1, otherwise it returns 0. + This is used by ports which support an overlay manager where + the overlay number is held in the top part of an address. In + some circumstances we want to include the overlay number in the + address, (normally because there is a symbol associated with + that address), but sometimes we want to mask out the overlay bits. */ + int (* symbol_at_address_func) + PARAMS ((bfd_vma addr, struct disassemble_info * info)); + + /* These are for buffer_read_memory. */ + bfd_byte *buffer; + bfd_vma buffer_vma; + int buffer_length; + + /* This variable may be set by the instruction decoder. It suggests + the number of bytes objdump should display on a single line. If + the instruction decoder sets this, it should always set it to + the same value in order to get reasonable looking output. */ + int bytes_per_line; + + /* the next two variables control the way objdump displays the raw data */ + /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */ + /* output will look like this: + 00: 00000000 00000000 + with the chunks displayed according to "display_endian". */ + int bytes_per_chunk; + enum bfd_endian display_endian; + + /* Results from instruction decoders. Not all decoders yet support + this information. This info is set each time an instruction is + decoded, and is only valid for the last such instruction. + + To determine whether this decoder supports this information, set + insn_info_valid to 0, decode an instruction, then check it. */ + + char insn_info_valid; /* Branch info has been set. */ + char branch_delay_insns; /* How many sequential insn's will run before + a branch takes effect. (0 = normal) */ + char data_size; /* Size of data reference in insn, in bytes */ + enum dis_insn_type insn_type; /* Type of instruction */ + bfd_vma target; /* Target address of branch or dref, if known; + zero if unknown. */ + bfd_vma target2; /* Second target address for dref2 */ + +} disassemble_info; + + +/* Standard disassemblers. Disassemble one instruction at the given + target address. Return number of bytes processed. */ +typedef int (*disassembler_ftype) + PARAMS((bfd_vma, disassemble_info *)); + +extern int print_insn_big_mips PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_little_mips PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_i386 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_m68k PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_z8001 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_z8002 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_h8300 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_h8300h PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_h8300s PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_h8500 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_alpha PARAMS ((bfd_vma, disassemble_info*)); +extern disassembler_ftype arc_get_disassembler PARAMS ((int, int)); +extern int print_insn_big_arm PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_little_arm PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_sparc PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_big_a29k PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_little_a29k PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_i960 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_sh PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_shl PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_hppa PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_m32r PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_m88k PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_mn10200 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_mn10300 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_ns32k PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_big_powerpc PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_little_powerpc PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_rs6000 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_w65 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_d10v PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_v850 PARAMS ((bfd_vma, disassemble_info*)); +extern int print_insn_tic30 PARAMS ((bfd_vma, disassemble_info*)); + +/* Fetch the disassembler for a given BFD, if that support is available. */ +extern disassembler_ftype disassembler PARAMS ((bfd *)); + + +/* This block of definitions is for particular callers who read instructions + into a buffer before calling the instruction decoder. */ + +/* Here is a function which callers may wish to use for read_memory_func. + It gets bytes from a buffer. */ +extern int buffer_read_memory + PARAMS ((bfd_vma, bfd_byte *, int, struct disassemble_info *)); + +/* This function goes with buffer_read_memory. + It prints a message using info->fprintf_func and info->stream. */ +extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *)); + + +/* Just print the address in hex. This is included for completeness even + though both GDB and objdump provide their own (to print symbolic + addresses). */ +extern void generic_print_address + PARAMS ((bfd_vma, struct disassemble_info *)); + +/* Always true. */ +extern int generic_symbol_at_address + PARAMS ((bfd_vma, struct disassemble_info *)); + +/* Macro to initialize a disassemble_info struct. This should be called + by all applications creating such a struct. */ +#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \ + (INFO).flavour = bfd_target_unknown_flavour, \ + (INFO).arch = bfd_arch_unknown, \ + (INFO).mach = 0, \ + (INFO).endian = BFD_ENDIAN_UNKNOWN, \ + INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) + +/* Call this macro to initialize only the internal variables for the + disassembler. Architecture dependent things such as byte order, or machine + variant are not touched by this macro. This makes things much easier for + GDB which must initialize these things seperatly. */ + +#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \ + (INFO).fprintf_func = (FPRINTF_FUNC), \ + (INFO).stream = (STREAM), \ + (INFO).symbols = NULL, \ + (INFO).num_symbols = 0, \ + (INFO).buffer = NULL, \ + (INFO).buffer_vma = 0, \ + (INFO).buffer_length = 0, \ + (INFO).read_memory_func = buffer_read_memory, \ + (INFO).memory_error_func = perror_memory, \ + (INFO).print_address_func = generic_print_address, \ + (INFO).symbol_at_address_func = generic_symbol_at_address, \ + (INFO).flags = 0, \ + (INFO).bytes_per_line = 0, \ + (INFO).bytes_per_chunk = 0, \ + (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \ + (INFO).insn_info_valid = 0 + +#endif /* ! defined (DIS_ASM_H) */ -- cgit v1.2.3